diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc8xx/fec.c')
| -rw-r--r-- | arch/powerpc/cpu/mpc8xx/fec.c | 46 |
1 files changed, 0 insertions, 46 deletions
diff --git a/arch/powerpc/cpu/mpc8xx/fec.c b/arch/powerpc/cpu/mpc8xx/fec.c index 65dfeab..d12b3df 100644 --- a/arch/powerpc/cpu/mpc8xx/fec.c +++ b/arch/powerpc/cpu/mpc8xx/fec.c @@ -377,26 +377,6 @@ static void fec_pin_init(int fecidx) */ immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1; -#if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2) - { - volatile fec_t *fecp; - - /* - * only two FECs please - */ - if ((unsigned int)fecidx >= 2) - hang(); - - if (fecidx == 0) - fecp = &immr->im_cpm.cp_fec1; - else - fecp = &immr->im_cpm.cp_fec2; - - /* our PHYs are the limit at 2.5 MHz */ - fecp->fec_mii_speed <<= 1; - } -#endif - #if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII) /* use MDC for MII */ immr->im_ioport.iop_pdpar |= 0x0080; @@ -562,32 +542,6 @@ static int fec_init (struct eth_device *dev, bd_t * bd) (volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset); int i; - if (efis->ether_index == 0) { -#if defined(CONFIG_FADS) /* FADS family uses FPGA (BCSR) to control PHYs */ -#if defined(CONFIG_MPC885ADS) - *(vu_char *) BCSR5 &= ~(BCSR5_MII1_EN | BCSR5_MII1_RST); -#else - /* configure FADS for fast (FEC) ethernet, half-duplex */ - /* The LXT970 needs about 50ms to recover from reset, so - * wait for it by discovering the PHY before leaving eth_init(). - */ - { - volatile uint *bcsr4 = (volatile uint *) BCSR4; - - *bcsr4 = (*bcsr4 & ~(BCSR4_FETH_EN | BCSR4_FETHCFG1)) - | (BCSR4_FETHCFG0 | BCSR4_FETHFDE | - BCSR4_FETHRST); - - /* reset the LXT970 PHY */ - *bcsr4 &= ~BCSR4_FETHRST; - udelay (10); - *bcsr4 |= BCSR4_FETHRST; - udelay (10); - } -#endif /* CONFIG_MPC885ADS */ -#endif /* CONFIG_FADS */ - } - #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) /* the MII interface is connected to FEC1 * so for the miiphy_xxx function to work we must |