diff options
Diffstat (limited to 'arch/microblaze')
| -rw-r--r-- | arch/microblaze/config.mk | 5 | ||||
| -rw-r--r-- | arch/microblaze/cpu/exception.c | 35 | ||||
| -rw-r--r-- | arch/microblaze/cpu/interrupts.c | 76 | ||||
| -rw-r--r-- | arch/microblaze/cpu/irq.S | 121 | ||||
| -rw-r--r-- | arch/microblaze/cpu/spl.c | 2 | ||||
| -rw-r--r-- | arch/microblaze/cpu/start.S | 126 | ||||
| -rw-r--r-- | arch/microblaze/cpu/u-boot-spl.lds | 6 | ||||
| -rw-r--r-- | arch/microblaze/cpu/u-boot.lds | 12 | ||||
| -rw-r--r-- | arch/microblaze/include/asm/asm.h | 4 | ||||
| -rw-r--r-- | arch/microblaze/include/asm/config.h | 7 | ||||
| -rw-r--r-- | arch/microblaze/include/asm/microblaze_intc.h | 2 | ||||
| -rw-r--r-- | arch/microblaze/include/asm/u-boot.h | 11 | ||||
| -rw-r--r-- | arch/microblaze/lib/Makefile | 1 | ||||
| -rw-r--r-- | arch/microblaze/lib/board.c | 201 |
14 files changed, 271 insertions, 338 deletions
diff --git a/arch/microblaze/config.mk b/arch/microblaze/config.mk index 98bbf79..2b817be 100644 --- a/arch/microblaze/config.mk +++ b/arch/microblaze/config.mk @@ -15,3 +15,8 @@ endif CONFIG_STANDALONE_LOAD_ADDR ?= 0x80F00000 PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__ + +ifeq ($(CONFIG_SPL_BUILD),) +PLATFORM_CPPFLAGS += -fPIC +endif +__HAVE_ARCH_GENERIC_BOARD := y diff --git a/arch/microblaze/cpu/exception.c b/arch/microblaze/cpu/exception.c index 227842f..aa34f45 100644 --- a/arch/microblaze/cpu/exception.c +++ b/arch/microblaze/cpu/exception.c @@ -13,49 +13,52 @@ void _hw_exception_handler (void) { int address = 0; int state = 0; + /* loading address of exception EAR */ - MFS (address, rear); + MFS(address, rear); /* loading excetpion state register ESR */ - MFS (state, resr); - printf ("Hardware exception at 0x%x address\n", address); + MFS(state, resr); + printf("Hardware exception at 0x%x address\n", address); + R17(address); + printf("Return address from exception 0x%x\n", address); switch (state & 0x1f) { /* mask on exception cause */ case 0x1: - puts ("Unaligned data access exception\n"); + puts("Unaligned data access exception\n"); break; case 0x2: - puts ("Illegal op-code exception\n"); + puts("Illegal op-code exception\n"); break; case 0x3: - puts ("Instruction bus error exception\n"); + puts("Instruction bus error exception\n"); break; case 0x4: - puts ("Data bus error exception\n"); + puts("Data bus error exception\n"); break; case 0x5: - puts ("Divide by zero exception\n"); + puts("Divide by zero exception\n"); break; #ifdef MICROBLAZE_V5 case 0x7: puts("Priviledged or stack protection violation exception\n"); break; case 0x1000: - puts ("Exception in delay slot\n"); + puts("Exception in delay slot\n"); break; #endif default: - puts ("Undefined cause\n"); + puts("Undefined cause\n"); break; } - printf ("Unaligned %sword access\n", ((state & 0x800) ? "" : "half")); - printf ("Unaligned %s access\n", ((state & 0x400) ? "store" : "load")); - printf ("Register R%x\n", (state & 0x3E) >> 5); - hang (); + printf("Unaligned %sword access\n", ((state & 0x800) ? "" : "half")); + printf("Unaligned %s access\n", ((state & 0x400) ? "store" : "load")); + printf("Register R%x\n", (state & 0x3E) >> 5); + hang(); } #ifdef CONFIG_SYS_USR_EXCEP void _exception_handler (void) { - puts ("User vector_exception\n"); - hang (); + puts("User vector_exception\n"); + hang(); } #endif diff --git a/arch/microblaze/cpu/interrupts.c b/arch/microblaze/cpu/interrupts.c index 9364e2f..b6d6610 100644 --- a/arch/microblaze/cpu/interrupts.c +++ b/arch/microblaze/cpu/interrupts.c @@ -14,10 +14,9 @@ #include <asm/microblaze_intc.h> #include <asm/asm.h> -#undef DEBUG_INT - void enable_interrupts(void) { + debug("Enable interrupts for the whole CPU\n"); MSRSET(0x2); } @@ -50,12 +49,11 @@ static void enable_one_interrupt(int irq) offset <<= irq; mask = intc->ier; intc->ier = (mask | offset); -#ifdef DEBUG_INT - printf("Enable one interrupt irq %x - mask %x,ier %x\n", offset, mask, - intc->ier); - printf("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, - intc->iar, intc->mer); -#endif + + debug("Enable one interrupt irq %x - mask %x,ier %x\n", offset, mask, + intc->ier); + debug("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, + intc->iar, intc->mer); } static void disable_one_interrupt(int irq) @@ -66,12 +64,11 @@ static void disable_one_interrupt(int irq) offset <<= irq; mask = intc->ier; intc->ier = (mask & ~offset); -#ifdef DEBUG_INT - printf("Disable one interrupt irq %x - mask %x,ier %x\n", irq, mask, - intc->ier); - printf("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, - intc->iar, intc->mer); -#endif + + debug("Disable one interrupt irq %x - mask %x,ier %x\n", irq, mask, + intc->ier); + debug("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, + intc->iar, intc->mer); } int install_interrupt_handler(int irq, interrupt_handler_t *hdlr, void *arg) @@ -88,12 +85,12 @@ int install_interrupt_handler(int irq, interrupt_handler_t *hdlr, void *arg) act->handler = hdlr; act->arg = arg; act->count = 0; - enable_one_interrupt (irq); + enable_one_interrupt(irq); return 0; } /* Disable */ - act->handler = (interrupt_handler_t *) def_hdlr; + act->handler = (interrupt_handler_t *)def_hdlr; act->arg = (void *)irq; disable_one_interrupt(irq); return 1; @@ -107,18 +104,17 @@ static void intc_init(void) intc->iar = 0xFFFFFFFF; /* XIntc_Start - hw_interrupt enable and all interrupt enable */ intc->mer = 0x3; -#ifdef DEBUG_INT - printf("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, - intc->iar, intc->mer); -#endif + + debug("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, + intc->iar, intc->mer); } -int interrupts_init(void) +int interrupt_init(void) { int i; #if defined(CONFIG_SYS_INTC_0_ADDR) && defined(CONFIG_SYS_INTC_0_NUM) - intc = (microblaze_intc_t *) (CONFIG_SYS_INTC_0_ADDR); + intc = (microblaze_intc_t *)CONFIG_SYS_INTC_0_ADDR; irq_no = CONFIG_SYS_INTC_0_NUM; #endif if (irq_no) { @@ -130,7 +126,7 @@ int interrupts_init(void) /* initialize irq list */ for (i = 0; i < irq_no; i++) { - vecs[i].handler = (interrupt_handler_t *) def_hdlr; + vecs[i].handler = (interrupt_handler_t *)def_hdlr; vecs[i].arg = (void *)i; vecs[i].count = 0; } @@ -147,31 +143,29 @@ void interrupt_handler(void) { int irqs = intc->ivr; /* find active interrupt */ int mask = 1; -#ifdef DEBUG_INT int value; - printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, - intc->iar, intc->mer); - R14(value); - printf ("Interrupt handler on %x line, r14 %x\n", irqs, value); -#endif struct irq_action *act = vecs + irqs; -#ifdef DEBUG_INT - printf - ("Jumping to interrupt handler rutine addr %x,count %x,arg %x\n", - act->handler, act->count, act->arg); + debug("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, + intc->iar, intc->mer); +#ifdef DEBUG + R14(value); #endif - act->handler (act->arg); + debug("Interrupt handler on %x line, r14 %x\n", irqs, value); + + debug("Jumping to interrupt handler rutine addr %x,count %x,arg %x\n", + (u32)act->handler, act->count, (u32)act->arg); + act->handler(act->arg); act->count++; intc->iar = mask << irqs; -#ifdef DEBUG_INT - printf ("Dump INTC reg, isr %x, ier %x, iar %x, mer %x\n", intc->isr, - intc->ier, intc->iar, intc->mer); + debug("Dump INTC reg, isr %x, ier %x, iar %x, mer %x\n", intc->isr, + intc->ier, intc->iar, intc->mer); +#ifdef DEBUG R14(value); - printf ("Interrupt handler on %x line, r14 %x\n", irqs, value); #endif + debug("Interrupt handler on %x line, r14 %x\n", irqs, value); } #if defined(CONFIG_CMD_IRQ) @@ -186,10 +180,10 @@ int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, const char *argv[]) "-----------------------------\n"); for (i = 0; i < irq_no; i++) { - if (act->handler != (interrupt_handler_t *) def_hdlr) { + if (act->handler != (interrupt_handler_t *)def_hdlr) { printf("%02d %08x %08x %d\n", i, - (int)act->handler, (int)act->arg, - act->count); + (int)act->handler, (int)act->arg, + act->count); } act++; } diff --git a/arch/microblaze/cpu/irq.S b/arch/microblaze/cpu/irq.S index 2401589..5cfe151 100644 --- a/arch/microblaze/cpu/irq.S +++ b/arch/microblaze/cpu/irq.S @@ -11,71 +11,70 @@ .text .global _interrupt_handler _interrupt_handler: - swi r2, r1, -4 - swi r3, r1, -8 - swi r4, r1, -12 - swi r5, r1, -16 - swi r6, r1, -20 - swi r7, r1, -24 - swi r8, r1, -28 - swi r9, r1, -32 - swi r10, r1, -36 - swi r11, r1, -40 - swi r12, r1, -44 - swi r13, r1, -48 - swi r14, r1, -52 - swi r15, r1, -56 - swi r16, r1, -60 - swi r17, r1, -64 - swi r18, r1, -68 - swi r19, r1, -72 - swi r20, r1, -76 - swi r21, r1, -80 - swi r22, r1, -84 - swi r23, r1, -88 - swi r24, r1, -92 - swi r25, r1, -96 - swi r26, r1, -100 - swi r27, r1, -104 - swi r28, r1, -108 - swi r29, r1, -112 - swi r30, r1, -116 - swi r31, r1, -120 addik r1, r1, -124 + swi r2, r1, 4 + swi r3, r1, 8 + swi r4, r1, 12 + swi r5, r1, 16 + swi r6, r1, 20 + swi r7, r1, 24 + swi r8, r1, 28 + swi r9, r1, 32 + swi r10, r1, 36 + swi r11, r1, 40 + swi r12, r1, 44 + swi r13, r1, 48 + swi r14, r1, 52 + swi r15, r1, 56 + swi r16, r1, 60 + swi r17, r1, 64 + swi r18, r1, 68 + swi r19, r1, 72 + swi r20, r1, 76 + swi r21, r1, 80 + swi r22, r1, 84 + swi r23, r1, 88 + swi r24, r1, 92 + swi r25, r1, 96 + swi r26, r1, 100 + swi r27, r1, 104 + swi r28, r1, 108 + swi r29, r1, 112 + swi r30, r1, 116 + swi r31, r1, 120 brlid r15, interrupt_handler nop + lwi r31, r1, 120 + lwi r30, r1, 116 + lwi r29, r1, 112 + lwi r28, r1, 108 + lwi r27, r1, 104 + lwi r26, r1, 100 + lwi r25, r1, 96 + lwi r24, r1, 92 + lwi r23, r1, 88 + lwi r22, r1, 84 + lwi r21, r1, 80 + lwi r20, r1, 76 + lwi r19, r1, 72 + lwi r18, r1, 68 + lwi r17, r1, 64 + lwi r16, r1, 60 + lwi r15, r1, 56 + lwi r14, r1, 52 + lwi r13, r1, 48 + lwi r12, r1, 44 + lwi r11, r1, 40 + lwi r10, r1, 36 + lwi r9, r1, 32 + lwi r8, r1, 28 + lwi r7, r1, 24 + lwi r6, r1, 20 + lwi r5, r1, 16 + lwi r4, r1, 12 + lwi r3, r1, 8 + lwi r2, r1, 4 addik r1, r1, 124 - lwi r31, r1, -120 - lwi r30, r1, -116 - lwi r29, r1, -112 - lwi r28, r1, -108 - lwi r27, r1, -104 - lwi r26, r1, -100 - lwi r25, r1, -96 - lwi r24, r1, -92 - lwi r23, r1, -88 - lwi r22, r1, -84 - lwi r21, r1, -80 - lwi r20, r1, -76 - lwi r19, r1, -72 - lwi r18, r1, -68 - lwi r17, r1, -64 - lwi r16, r1, -60 - lwi r15, r1, -56 - lwi r14, r1, -52 - lwi r13, r1, -48 - lwi r12, r1, -44 - lwi r11, r1, -40 - lwi r10, r1, -36 - lwi r9, r1, -32 - lwi r8, r1, -28 - lwi r7, r1, -24 - lwi r6, r1, -20 - lwi r5, r1, -16 - lwi r4, r1, -12 - lwi r3, r1, -8 - lwi r2, r1, -4 - rtid r14, 0 nop .size _interrupt_handler,.-_interrupt_handler diff --git a/arch/microblaze/cpu/spl.c b/arch/microblaze/cpu/spl.c index 0912261..2cc0a2d 100644 --- a/arch/microblaze/cpu/spl.c +++ b/arch/microblaze/cpu/spl.c @@ -25,8 +25,6 @@ u32 spl_boot_device(void) /* Board initialization after bss clearance */ void spl_board_init(void) { - gd = (gd_t *)CONFIG_SPL_STACK_ADDR; - /* enable console uart printing */ preloader_console_init(); } diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index 84c29e5..953d3a1 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -30,7 +30,11 @@ _start: mts rshr, r1 addi r1, r1, -4 /* Decrement SP to top of memory */ #else +#if defined(CONFIG_SYS_MALLOC_F_LEN) + addi r1, r0, CONFIG_SYS_INIT_SP_OFFSET - CONFIG_SYS_MALLOC_F_LEN +#else addi r1, r0, CONFIG_SYS_INIT_SP_OFFSET +#endif mts rshr, r1 addi r1, r1, -4 /* Decrement SP to top of memory */ @@ -129,7 +133,7 @@ _start: /* Flush cache before enable cache */ addik r5, r0, 0 addik r6, r0, XILINX_DCACHE_BYTE_SIZE -flush: bralid r15, flush_cache + bralid r15, flush_cache nop /* enable instruction and data cache */ @@ -150,12 +154,28 @@ clear_bss: bnei r6, 2b 3: /* jumping to board_init */ #ifndef CONFIG_SPL_BUILD + or r5, r0, r0 /* flags - empty */ + addi r31, r0, _gd +#if defined(CONFIG_SYS_MALLOC_F_LEN) + addi r6, r0, CONFIG_SYS_INIT_SP_OFFSET + swi r6, r31, GD_MALLOC_BASE +#endif brai board_init_f #else + addi r31, r0, _gd +#if defined(CONFIG_SYS_MALLOC_F_LEN) + addi r6, r0, CONFIG_SPL_STACK_ADDR + swi r6, r31, GD_MALLOC_BASE +#endif brai board_init_r #endif 1: bri 1b + .section .bss +.align 4 +_gd: + .space GENERATED_GBL_DATA_SIZE + #ifndef CONFIG_SPL_BUILD /* * Read 16bit little endian @@ -189,4 +209,108 @@ out16: bslli r3, r6, 8 rtsd r15, 8 or r0, r0, r0 .end out16 + +/* + * Relocate u-boot + */ + .text + .global relocate_code + .ent relocate_code + .align 2 +relocate_code: + /* + * r5 - start_addr_sp + * r6 - new_gd + * r7 - reloc_addr + */ + addi r1, r5, 0 /* Start to use new SP */ + addi r31, r6, 0 /* Start to use new GD */ + + add r23, r0, r7 /* Move reloc addr to r23 */ + /* Relocate text and data - r12 temp value */ + addi r21, r0, _start + addi r22, r0, __end - 4 /* Include BSS too */ + + rsub r6, r21, r22 + or r5, r0, r0 +1: lw r12, r21, r5 /* Load u-boot data */ + sw r12, r23, r5 /* Write zero to loc */ + cmp r12, r5, r6 /* Check if we have reach the end */ + bneid r12, 1b + addi r5, r5, 4 /* Increment to next loc - relocate code */ + + /* R23 points to the base address. */ + add r23, r0, r7 /* Move reloc addr to r23 */ + addi r24, r0, CONFIG_SYS_TEXT_BASE /* Get reloc offset */ + rsub r23, r24, r23 /* keep - this is already here gd->reloc_off */ + + addik r6, r0, 0x2 /* BIG/LITTLE endian offset */ + lwi r7, r0, 0x28 + swi r6, r0, 0x28 /* used first unused MB vector */ + lbui r10, r0, 0x28 /* used first unused MB vector */ + swi r7, r0, 0x28 + +#ifdef CONFIG_SYS_USR_EXCEP + addik r6, r0, _exception_handler + addk r6, r6, r23 /* add offset */ + sw r6, r1, r0 + lhu r7, r1, r10 + rsubi r8, r10, 0xa + sh r7, r0, r8 + rsubi r8, r10, 0xe + sh r6, r0, r8 +#endif + addik r6, r0, _hw_exception_handler + addk r6, r6, r23 /* add offset */ + sw r6, r1, r0 + lhu r7, r1, r10 + rsubi r8, r10, 0x22 + sh r7, r0, r8 + rsubi r8, r10, 0x26 + sh r6, r0, r8 + + addik r6, r0, _interrupt_handler + addk r6, r6, r23 /* add offset */ + sw r6, r1, r0 + lhu r7, r1, r10 + rsubi r8, r10, 0x12 + sh r7, r0, r8 + rsubi r8, r10, 0x16 + sh r6, r0, r8 + + /* Check if GOT exist */ + addik r21, r23, _got_start + addik r22, r23, _got_end + cmpu r12, r21, r22 + beqi r12, 2f /* No GOT table - jump over */ + + /* Skip last 3 entries plus 1 because of loop boundary below */ + addik r22, r22, -0x10 + + /* Relocate the GOT. */ +3: lw r12, r21, r0 /* Load entry */ + addk r12, r12, r23 /* Add reloc offset */ + sw r12, r21, r0 /* Save entry back */ + + cmpu r12, r21, r22 /* Check if this cross boundary */ + bneid r12, 3b + addik r21. r21, 4 + + /* Update pointer to GOT */ + mfs r20, rpc + addik r20, r20, _GLOBAL_OFFSET_TABLE_ + 8 + addk r20, r20, r23 + + /* Flush caches to ensure consistency */ + addik r5, r0, 0 + addik r6, r0, XILINX_DCACHE_BYTE_SIZE + bralid r15, flush_cache + nop + +2: addi r5, r31, 0 /* gd is initialized in board_r.c */ + addi r6, r0, CONFIG_SYS_TEXT_BASE + addi r12, r23, board_init_r + bra r12 /* Jump to relocated code */ + + .end relocate_code #endif diff --git a/arch/microblaze/cpu/u-boot-spl.lds b/arch/microblaze/cpu/u-boot-spl.lds index 96353cd..c60336c 100644 --- a/arch/microblaze/cpu/u-boot-spl.lds +++ b/arch/microblaze/cpu/u-boot-spl.lds @@ -37,6 +37,12 @@ SECTIONS __data_end = .; } + . = ALIGN(4); + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } + __init_end = . ; + .bss ALIGN(0x4): { __bss_start = .; diff --git a/arch/microblaze/cpu/u-boot.lds b/arch/microblaze/cpu/u-boot.lds index fdad207..2502a0d 100644 --- a/arch/microblaze/cpu/u-boot.lds +++ b/arch/microblaze/cpu/u-boot.lds @@ -29,17 +29,23 @@ SECTIONS .data ALIGN(0x4): { __data_start = .; -#ifdef CONFIG_OF_EMBED - dts/built-in.o (.data) -#endif *(.data) __data_end = .; } + .got ALIGN(4): + { + _got_start = .; + *(.got*) + . = ALIGN(4); + _got_end = .; + } + . = ALIGN(4); .u_boot_list : { KEEP(*(SORT(.u_boot_list*))); } + __init_end = . ; .bss ALIGN(0x4): { diff --git a/arch/microblaze/include/asm/asm.h b/arch/microblaze/include/asm/asm.h index c1c3b03..11f3dd0 100644 --- a/arch/microblaze/include/asm/asm.h +++ b/arch/microblaze/include/asm/asm.h @@ -43,6 +43,10 @@ #define R14(val) \ __asm__ __volatile__ ("addi %0, r14, 0":"=r" (val)); +/* get return address from interrupt */ +#define R17(val) \ + __asm__ __volatile__ ("addi %0, r17, 0" : "=r" (val)); + #define NOP __asm__ __volatile__ ("nop"); /* use machine status registe USE_MSR_REG */ diff --git a/arch/microblaze/include/asm/config.h b/arch/microblaze/include/asm/config.h index cd29734..32fd636 100644 --- a/arch/microblaze/include/asm/config.h +++ b/arch/microblaze/include/asm/config.h @@ -7,4 +7,11 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_NEEDS_MANUAL_RELOC +#endif + +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_GENERIC_BOARD + #endif diff --git a/arch/microblaze/include/asm/microblaze_intc.h b/arch/microblaze/include/asm/microblaze_intc.h index 0fb9207..6586838 100644 --- a/arch/microblaze/include/asm/microblaze_intc.h +++ b/arch/microblaze/include/asm/microblaze_intc.h @@ -34,5 +34,3 @@ struct irq_action { */ int install_interrupt_handler(int irq, interrupt_handler_t *hdlr, void *arg); - -int interrupts_init(void); diff --git a/arch/microblaze/include/asm/u-boot.h b/arch/microblaze/include/asm/u-boot.h index 54d415e..66f8f95 100644 --- a/arch/microblaze/include/asm/u-boot.h +++ b/arch/microblaze/include/asm/u-boot.h @@ -16,16 +16,7 @@ #ifndef _U_BOOT_H_ #define _U_BOOT_H_ -typedef struct bd_info { - unsigned long bi_memstart; /* start of DRAM memory */ - phys_size_t bi_memsize; /* size of DRAM memory in bytes */ - unsigned long bi_flashstart; /* start of FLASH memory */ - unsigned long bi_flashsize; /* size of FLASH memory */ - unsigned long bi_flashoffset; /* reserved area for startup monitor */ - unsigned long bi_sramstart; /* start of SRAM memory */ - unsigned long bi_sramsize; /* size of SRAM memory */ - ulong bi_boot_params; /* where this board expects params */ -} bd_t; +#include <asm-generic/u-boot.h> /* For image.h:image_check_target_arch() */ #define IH_ARCH_DEFAULT IH_ARCH_MICROBLAZE diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile index 339dd15..0289d0c 100644 --- a/arch/microblaze/lib/Makefile +++ b/arch/microblaze/lib/Makefile @@ -5,6 +5,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += board.o obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-y += muldi3.o diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c deleted file mode 100644 index 600c80a..0000000 --- a/arch/microblaze/lib/board.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * (C) Copyright 2007 Michal Simek - * (C) Copyright 2004 Atmark Techno, Inc. - * - * Michal SIMEK <monstr@monstr.eu> - * Yasushi SHOJI <yashi@atmark-techno.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <malloc.h> -#include <version.h> -#include <watchdog.h> -#include <stdio_dev.h> -#include <serial.h> -#include <net.h> -#include <spi.h> -#include <linux/compiler.h> -#include <asm/processor.h> -#include <asm/microblaze_intc.h> -#include <fdtdec.h> - -DECLARE_GLOBAL_DATA_PTR; - -static int display_banner(void) -{ - printf("\n\n%s\n\n", version_string); - return 0; -} - -/* - * All attempts to come up with a "common" initialization sequence - * that works for all boards and architectures failed: some of the - * requirements are just _too_ different. To get rid of the resulting - * mess of board dependend #ifdef'ed code we now make the whole - * initialization sequence configurable to the user. - * - * The requirements for any new initalization function is simple: it - * receives a pointer to the "global data" structure as it's only - * argument, and returns an integer return code, where 0 means - * "continue" and != 0 means "fatal error, hang the system". - */ -typedef int (init_fnc_t) (void); - -init_fnc_t *init_sequence[] = { - env_init, -#ifdef CONFIG_OF_CONTROL - fdtdec_check_fdt, -#endif - serial_init, -#ifndef CONFIG_SPL_BUILD - console_init_f, -#endif - display_banner, -#ifndef CONFIG_SPL_BUILD - interrupts_init, - timer_init, -#endif - NULL, -}; - -unsigned long monitor_flash_len; - -void board_init_f(ulong not_used) -{ - bd_t *bd; - init_fnc_t **init_fnc_ptr; - gd = (gd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET); - bd = (bd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET - - GENERATED_BD_INFO_SIZE); -#if defined(CONFIG_CMD_FLASH) && !defined(CONFIG_SPL_BUILD) - ulong flash_size = 0; -#endif - asm ("nop"); /* FIXME gd is not initialize - wait */ - memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE); - memset((void *)bd, 0, GENERATED_BD_INFO_SIZE); - gd->bd = bd; - gd->baudrate = CONFIG_BAUDRATE; - bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; - bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE; - gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ - - monitor_flash_len = __end - __text_start; - -#ifdef CONFIG_OF_EMBED - /* Get a pointer to the FDT */ - gd->fdt_blob = __dtb_dt_begin; -#elif defined CONFIG_OF_SEPARATE - /* FDT is at end of image */ - gd->fdt_blob = (void *)__end; -#endif - -#ifndef CONFIG_SPL_BUILD - /* Allow the early environment to override the fdt address */ - gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16, - (uintptr_t)gd->fdt_blob); -#endif - - /* - * The Malloc area is immediately below the monitor copy in DRAM - * aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off - * as our monitory code is run from SDRAM - */ - mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN); - - serial_initialize(); - -#ifdef CONFIG_XILINX_TB_WATCHDOG - hw_watchdog_init(); -#endif - for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { - WATCHDOG_RESET(); - if ((*init_fnc_ptr) () != 0) - hang(); - } - -#ifndef CONFIG_SPL_BUILD -#ifdef CONFIG_OF_CONTROL - /* For now, put this check after the console is ready */ - if (fdtdec_prepare_fdt()) - panic("** No FDT - please see doc/README.fdt-control"); - else - printf("DTB: 0x%x\n", (u32)gd->fdt_blob); -#endif - - puts("SDRAM :\n"); - printf("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF"); - printf("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF"); - printf("\tU-Boot Start:0x%08x\n", CONFIG_SYS_TEXT_BASE); - -#if defined(CONFIG_CMD_FLASH) - puts("Flash: "); - bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; - flash_size = flash_init(); - if (bd->bi_flashstart && flash_size > 0) { -# ifdef CONFIG_SYS_FLASH_CHECKSUM - print_size(flash_size, ""); - /* - * Compute and print flash CRC if flashchecksum is set to 'y' - * - * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX - */ - if (getenv_yesno("flashchecksum") == 1) { - printf(" CRC: %08X", - crc32(0, (const u8 *)bd->bi_flashstart, - flash_size) - ); - } - putc('\n'); -# else /* !CONFIG_SYS_FLASH_CHECKSUM */ - print_size(flash_size, "\n"); -# endif /* CONFIG_SYS_FLASH_CHECKSUM */ - bd->bi_flashsize = flash_size; - bd->bi_flashoffset = bd->bi_flashstart + flash_size; - } else { - puts("Flash init FAILED"); - bd->bi_flashstart = 0; - bd->bi_flashsize = 0; - bd->bi_flashoffset = 0; - } -#endif - -#ifdef CONFIG_SPI - spi_init(); -#endif - - /* relocate environment function pointers etc. */ - env_relocate(); - - /* Initialize stdio devices */ - stdio_init(); - - /* Initialize the jump table for applications */ - jumptable_init(); - - /* Initialize the console (after the relocation and devices init) */ - console_init_r(); - - board_init(); - - /* Initialize from environment */ - load_addr = getenv_ulong("loadaddr", 16, load_addr); - -#if defined(CONFIG_CMD_NET) - printf("Net: "); - eth_initialize(gd->bd); - - uchar enetaddr[6]; - eth_getenv_enetaddr("ethaddr", enetaddr); - printf("MAC: %pM\n", enetaddr); -#endif - - /* main_loop */ - for (;;) { - WATCHDOG_RESET(); - main_loop(); - } -#endif /* CONFIG_SPL_BUILD */ -} |