diff options
Diffstat (limited to 'arch/i386')
| -rw-r--r-- | arch/i386/cpu/sc520/sc520.c | 54 | ||||
| -rw-r--r-- | arch/i386/cpu/sc520/sc520_asm.S | 642 | ||||
| -rw-r--r-- | arch/i386/cpu/start.S | 30 | ||||
| -rw-r--r-- | arch/i386/cpu/start16.S | 9 |
4 files changed, 362 insertions, 373 deletions
diff --git a/arch/i386/cpu/sc520/sc520.c b/arch/i386/cpu/sc520/sc520.c index 519bfd8..7acd471 100644 --- a/arch/i386/cpu/sc520/sc520.c +++ b/arch/i386/cpu/sc520/sc520.c @@ -41,7 +41,8 @@ volatile sc520_mmcr_t *sc520_mmcr = (sc520_mmcr_t *)0xfffef000; void init_sc520(void) { - /* Set the UARTxCTL register at it's slower, + /* + * Set the UARTxCTL register at it's slower, * baud clock giving us a 1.8432 MHz reference */ writeb(0x07, &sc520_mmcr->uart1ctl); @@ -50,25 +51,30 @@ void init_sc520(void) /* first set the timer pin mapping */ writeb(0x72, &sc520_mmcr->clksel); /* no clock frequency selected, use 1.1892MHz */ - /* enable PCI bus arbitrer */ - writeb(0x02, &sc520_mmcr->sysarbctl); /* enable concurrent mode */ + /* enable PCI bus arbiter (concurrent mode) */ + writeb(0x02, &sc520_mmcr->sysarbctl); - writeb(0x1f, &sc520_mmcr->sysarbmenb); /* enable external grants */ - writeb(0x04, &sc520_mmcr->hbctl); /* enable posted-writes */ + /* enable external grants */ + writeb(0x1f, &sc520_mmcr->sysarbmenb); + + /* enable posted-writes */ + writeb(0x04, &sc520_mmcr->hbctl); if (CONFIG_SYS_SC520_HIGH_SPEED) { - writeb(0x02, &sc520_mmcr->cpuctl); /* set it to 133 MHz and write back */ + /* set it to 133 MHz and write back */ + writeb(0x02, &sc520_mmcr->cpuctl); gd->cpu_clk = 133000000; printf("## CPU Speed set to 133MHz\n"); } else { - writeb(0x01, &sc520_mmcr->cpuctl); /* set it to 100 MHz and write back */ + /* set it to 100 MHz and write back */ + writeb(0x01, &sc520_mmcr->cpuctl); printf("## CPU Speed set to 100MHz\n"); gd->cpu_clk = 100000000; } /* wait at least one millisecond */ - asm("movl $0x2000,%%ecx\n" + asm("movl $0x2000, %%ecx\n" "0: pushl %%ecx\n" "popl %%ecx\n" "loop 0b\n": : : "ecx"); @@ -107,15 +113,15 @@ unsigned long init_sc520_dram(void) /* set SDRAM speed here */ - refresh_rate/=78; - if (refresh_rate<=1) { - val = 0; /* 7.8us */ - } else if (refresh_rate==2) { - val = 1; /* 15.6us */ - } else if (refresh_rate==3 || refresh_rate==4) { - val = 2; /* 31.2us */ + refresh_rate /= 78; + if (refresh_rate <= 1) { + val = 0; /* 7.8us */ + } else if (refresh_rate == 2) { + val = 1; /* 15.6us */ + } else if (refresh_rate == 3 || refresh_rate == 4) { + val = 2; /* 31.2us */ } else { - val = 3; /* 62.4us */ + val = 3; /* 62.4us */ } tmp = (readb(&sc520_mmcr->drcctl) & 0xcf) | (val<<4); @@ -124,9 +130,9 @@ unsigned long init_sc520_dram(void) val = readb(&sc520_mmcr->drctmctl) & 0xf0; if (cas_precharge_delay==3) { - val |= 0x04; /* 3T */ + val |= 0x04; /* 3T */ } else if (cas_precharge_delay==4) { - val |= 0x08; /* 4T */ + val |= 0x08; /* 4T */ } else if (cas_precharge_delay>4) { val |= 0x0c; } @@ -139,8 +145,10 @@ unsigned long init_sc520_dram(void) writeb(val, &c520_mmcr->drctmctl); #endif - /* We read-back the configuration of the dram - * controller that the assembly code wrote */ + /* + * We read-back the configuration of the dram + * controller that the assembly code wrote + */ dram_ctrl = readl(&sc520_mmcr->drcbendadr); bd->bi_dram[0].start = 0; @@ -148,7 +156,6 @@ unsigned long init_sc520_dram(void) /* bank 0 enabled */ dram_present = bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22; bd->bi_dram[0].size = bd->bi_dram[1].start; - } else { bd->bi_dram[0].size = 0; bd->bi_dram[1].start = bd->bi_dram[0].start; @@ -179,11 +186,6 @@ unsigned long init_sc520_dram(void) } else { bd->bi_dram[3].size = 0; } - - -#if 0 - printf("Configured %d bytes of dram\n", dram_present); -#endif gd->ram_size = dram_present; return dram_present; diff --git a/arch/i386/cpu/sc520/sc520_asm.S b/arch/i386/cpu/sc520/sc520_asm.S index fff56c0..7c2de31 100644 --- a/arch/i386/cpu/sc520/sc520_asm.S +++ b/arch/i386/cpu/sc520/sc520_asm.S @@ -172,366 +172,349 @@ .equ ROW11_DATA, 0x07070707 /* 11 row data/also bank switch (MASK) */ .equ ROW10_DATA, 0xaaaaaaaa /* 10 row data/also bank switch (MASK) */ - - /* - * initialize dram controller registers - */ .globl mem_init mem_init: - xorw %ax,%ax - movl $DBCTL, %edi - movb %al, (%edi) /* disable write buffer */ - - movl $ECCCTL, %edi - movb %al, (%edi) /* disable ECC */ - - movl $DRCTMCTL, %edi - movb $0x1E,%al /* Set SDRAM timing for slowest */ - movb %al, (%edi) - - /* - * setup loop to do 4 external banks starting with bank 3 - */ - movl $0xff000000,%eax /* enable last bank and setup */ - movl $DRCBENDADR, %edi /* ending address register */ - movl %eax, (%edi) - - movl $DRCCFG, %edi /* setup */ - movw $0xbbbb,%ax /* dram config register for */ - movw %ax, (%edi) - - /* - * issue a NOP to all DRAMs - */ - movl $DRCCTL, %edi /* setup DRAM control register with */ - movb $0x1,%al /* Disable refresh,disable write buffer */ - movb %al, (%edi) - movl $CACHELINESZ, %esi /* just a dummy address to write for */ - movw %ax, (%esi) - /* - * delay for 100 usec? 200? - * ******this is a cludge for now ************* - */ - movw $100,%cx + /* initialize dram controller registers */ + xorw %ax, %ax + movl $DBCTL, %edi + movb %al, (%edi) /* disable write buffer */ + + movl $ECCCTL, %edi + movb %al, (%edi) /* disable ECC */ + + movl $DRCTMCTL, %edi + movb $0x1e, %al /* Set SDRAM timing for slowest */ + movb %al, (%edi) + + /* setup loop to do 4 external banks starting with bank 3 */ + movl $0xff000000, %eax /* enable last bank and setup */ + movl $DRCBENDADR, %edi /* ending address register */ + movl %eax, (%edi) + + movl $DRCCFG, %edi /* setup */ + movw $0xbbbb, %ax /* dram config register for */ + movw %ax, (%edi) + + /* issue a NOP to all DRAMs */ + movl $DRCCTL, %edi /* setup DRAM control register with */ + movb $0x01, %al /* Disable refresh,disable write buffer */ + movb %al, (%edi) + movl $CACHELINESZ, %esi /* just a dummy address to write for */ + movw %ax, (%esi) + + /* delay for 100 usec? */ + movw $100, %cx sizdelay: - loop sizdelay /* we need 100 usec here */ - /***********************************************/ + loop sizdelay - /* - * issue all banks precharge - */ - movb $0x2,%al /* All banks precharge */ - movb %al, (%edi) - movw %ax, (%esi) + /* issue all banks precharge */ + movb $0x02, %al + movb %al, (%edi) + movw %ax, (%esi) - /* - * issue 2 auto refreshes to all banks - */ - movb $0x4,%al /* Auto refresh cmd */ - movb %al, (%edi) - movw $2,%cx + /* issue 2 auto refreshes to all banks */ + movb $0x04, %al /* Auto refresh cmd */ + movb %al, (%edi) + movw $0x02, %cx refresh1: - movw %ax, (%esi) - loop refresh1 - - /* - * issue LOAD MODE REGISTER command - */ - movb $0x3,%al /* Load mode register cmd */ - movb %al, (%edi) - movw %ax, (%esi) - - /* - * issue 8 more auto refreshes to all banks - */ - movb $0x4,%al /* Auto refresh cmd */ - movb %al, (%edi) - movw $8,%cx + movw %ax, (%esi) + loop refresh1 + + /* issue LOAD MODE REGISTER command */ + movb $0x03, %al /* Load mode register cmd */ + movb %al, (%edi) + movw %ax, (%esi) + + /* issue 8 more auto refreshes to all banks */ + movb $0x04, %al /* Auto refresh cmd */ + movb %al, (%edi) + movw $0x0008, %cx refresh2: - movw %ax, (%esi) - loop refresh2 + movw %ax, (%esi) + loop refresh2 - /* - * set control register to NORMAL mode - */ - movb $0x0,%al /* Normal mode value */ - movb %al, (%edi) + /* set control register to NORMAL mode */ + movb $0x00, %al /* Normal mode value */ + movb %al, (%edi) - /* - * size dram starting with external bank 3 moving to external bank 0 - */ - movl $0x3,%ecx /* start with external bank 3 */ + /* + * size dram starting with external bank 3 + * moving to external bank 0 + */ + movl $0x3, %ecx /* start with external bank 3 */ nextbank: - /* - * write col 11 wrap adr - */ - movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */ - movl $COL11_DATA, %eax /* pattern for max supported columns(11) */ - movl %eax, (%esi) /* write max col pattern at max col adr */ - movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write col 10 wrap adr - */ + /* write col 11 wrap adr */ + movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */ + movl $COL11_DATA, %eax /* pattern for max supported columns(11) */ + movl %eax, (%esi) /* write max col pattern at max col adr */ + movl (%esi), %ebx /* optional read */ + cmpl %ebx, %eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + + /* write col 10 wrap adr */ + movl $COL10_ADR, %esi /* set address to 10 col wrap address */ + movl $COL10_DATA, %eax /* pattern for 10 col wrap */ + movl %eax, (%esi) /* write 10 col pattern @ 10 col wrap adr */ + movl (%esi), %ebx /* optional read */ + cmpl %ebx, %eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + + /* write col 9 wrap adr */ + movl $COL09_ADR, %esi /* set address to 9 col wrap address */ + movl $COL09_DATA, %eax /* pattern for 9 col wrap */ + movl %eax, (%esi) /* write 9 col pattern @ 9 col wrap adr */ + movl (%esi), %ebx /* optional read */ + cmpl %ebx, %eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + + /* write col 8 wrap adr */ + movl $COL08_ADR, %esi /* set address to min(8) col wrap address */ + movl $COL08_DATA, %eax /* pattern for min (8) col wrap */ + movl %eax, (%esi) /* write min col pattern @ min col adr */ + movl (%esi), %ebx /* optional read */ + cmpl %ebx, %eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + + /* write row 14 wrap adr */ + movl $ROW14_ADR, %esi /* set address to max row (14) wrap addr */ + movl $ROW14_DATA, %eax /* pattern for max supported rows(14) */ + movl %eax, (%esi) /* write max row pattern at max row adr */ + movl (%esi), %ebx /* optional read */ + cmpl %ebx, %eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + + /* write row 13 wrap adr */ + movl $ROW13_ADR, %esi /* set address to 13 row wrap address */ + movl $ROW13_DATA, %eax /* pattern for 13 row wrap */ + movl %eax, (%esi) /* write 13 row pattern @ 13 row wrap adr */ + movl (%esi), %ebx /* optional read */ + cmpl %ebx, %eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + + /* write row 12 wrap adr */ + movl $ROW12_ADR, %esi /* set address to 12 row wrap address */ + movl $ROW12_DATA, %eax /* pattern for 12 row wrap */ + movl %eax, (%esi) /* write 12 row pattern @ 12 row wrap adr */ + movl (%esi), %ebx /* optional read */ + cmpl %ebx, %eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + + /* write row 11 wrap adr */ + movl $ROW11_ADR, %edi /* set address to 11 row wrap address */ + movl $ROW11_DATA, %eax /* pattern for 11 row wrap */ + movl %eax, (%edi) /* write 11 row pattern @ 11 row wrap adr */ + movl (%edi), %ebx /* optional read */ + cmpl %ebx, %eax /* to verify write */ + jnz bad_ram /* this ram is bad */ - movl $COL10_ADR, %esi /* set address to 10 col wrap address */ - movl $COL10_DATA, %eax /* pattern for 10 col wrap */ - movl %eax, (%esi) /* write 10 col pattern @ 10 col wrap adr */ - movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write col 9 wrap adr - */ - movl $COL09_ADR, %esi /* set address to 9 col wrap address */ - movl $COL09_DATA, %eax /* pattern for 9 col wrap */ - movl %eax, (%esi) /* write 9 col pattern @ 9 col wrap adr */ - movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write col 8 wrap adr - */ - movl $COL08_ADR, %esi /* set address to min(8) col wrap address */ - movl $COL08_DATA, %eax /* pattern for min (8) col wrap */ - movl %eax, (%esi) /* write min col pattern @ min col adr */ - movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write row 14 wrap adr - */ - movl $ROW14_ADR, %esi /* set address to max row (14) wrap addr */ - movl $ROW14_DATA, %eax /* pattern for max supported rows(14) */ - movl %eax, (%esi) /* write max row pattern at max row adr */ - movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write row 13 wrap adr - */ - movl $ROW13_ADR, %esi /* set address to 13 row wrap address */ - movl $ROW13_DATA, %eax /* pattern for 13 row wrap */ - movl %eax, (%esi) /* write 13 row pattern @ 13 row wrap adr */ - movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write row 12 wrap adr - */ - movl $ROW12_ADR, %esi /* set address to 12 row wrap address */ - movl $ROW12_DATA, %eax /* pattern for 12 row wrap */ - movl %eax, (%esi) /* write 12 row pattern @ 12 row wrap adr */ - movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write row 11 wrap adr - */ - movl $ROW11_ADR, %edi /* set address to 11 row wrap address */ - movl $ROW11_DATA, %eax /* pattern for 11 row wrap */ - movl %eax, (%edi) /* write 11 row pattern @ 11 row wrap adr */ - movl (%edi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write row 10 wrap adr --- this write is really to determine number of banks - */ - movl $ROW10_ADR, %edi /* set address to 10 row wrap address */ - movl $ROW10_DATA, %eax /* pattern for 10 row wrap (AA) */ - movl %eax, (%edi) /* write 10 row pattern @ 10 row wrap adr */ - movl (%edi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * read data @ row 12 wrap adr to determine * banks, - * and read data @ row 14 wrap adr to determine * rows. - * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM. - * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4 - * if data @ row 12 wrap == 11 or 12, we have 4 banks, - */ - xorw %di,%di /* value for 2 banks in DI */ - movl (%esi), %ebx /* read from 12 row wrap to check banks - * (esi is setup from the write to row 12 wrap) */ - cmpl %ebx,%eax /* check for AA pattern (eax holds the aa pattern) */ - jz only2 /* if pattern == AA, we only have 2 banks */ + /* + * write row 10 wrap adr --- this write is really to determine + * number of banks + */ + movl $ROW10_ADR, %edi /* set address to 10 row wrap address */ + movl $ROW10_DATA, %eax /* pattern for 10 row wrap (AA) */ + movl %eax, (%edi) /* write 10 row pattern @ 10 row wrap adr */ + movl (%edi), %ebx /* optional read */ + cmpl %ebx, %eax /* to verify write */ + jnz bad_ram /* this ram is bad */ + + /* + * read data @ row 12 wrap adr to determine * banks, + * and read data @ row 14 wrap adr to determine * rows. + * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM. + * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4 + * if data @ row 12 wrap == 11 or 12, we have 4 banks, + */ + xorw %di, %di /* value for 2 banks in DI */ + movl (%esi), %ebx /* read from 12 row wrap to check banks */ + /* (esi is setup from the write to row 12 wrap) */ + cmpl %ebx, %eax /* check for AA pattern (eax holds the aa pattern) */ + jz only2 /* if pattern == AA, we only have 2 banks */ /* 4 banks */ - movw $8,%di /* value for 4 banks in DI (BNK_CNT bit) */ - cmpl $ROW11_DATA, %ebx /* only other legitimate values are 11 */ - jz only2 - cmpl $ROW12_DATA, %ebx /* and 12 */ - jnz bad_ram /* its bad if not 11 or 12! */ + movw $0x008, %di /* value for 4 banks in DI (BNK_CNT bit) */ + cmpl $ROW11_DATA, %ebx /* only other legitimate values are 11 */ + jz only2 + cmpl $ROW12_DATA, %ebx /* and 12 */ + jnz bad_ram /* its bad if not 11 or 12! */ /* fall through */ only2: /* * validate row mask */ - movl $ROW14_ADR, %esi /* set address back to max row wrap addr */ - movl (%esi), %eax /* read actual number of rows @ row14 adr */ + movl $ROW14_ADR, %esi /* set address back to max row wrap addr */ + movl (%esi), %eax /* read actual number of rows @ row14 adr */ - cmpl $ROW11_DATA, %eax /* row must be greater than 11 pattern */ - jb bad_ram + cmpl $ROW11_DATA, %eax /* row must be greater than 11 pattern */ + jb bad_ram - cmpl $ROW14_DATA, %eax /* and row must be less than 14 pattern */ - ja bad_ram + cmpl $ROW14_DATA, %eax /* and row must be less than 14 pattern */ + ja bad_ram + + cmpb %ah, %al /* verify all 4 bytes of dword same */ + jnz bad_ram + movl %eax, %ebx + shrl $16, %ebx + cmpw %bx, %ax + jnz bad_ram + + /* + * read col 11 wrap adr for real column data value + */ + movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */ + movl (%esi), %eax /* read real col number at max col adr */ + + /* + * validate column data + */ + cmpl $COL08_DATA, %eax /* col must be greater than 8 pattern */ + jb bad_ram + + cmpl $COL11_DATA, %eax /* and row must be less than 11 pattern */ + ja bad_ram + + subl $COL08_DATA, %eax /* normalize column data to zero */ + jc bad_ram + cmpb %ah, %al /* verify all 4 bytes of dword equal */ + jnz bad_ram + movl %eax, %edx + shrl $16, %edx + cmpw %dx, %ax + jnz bad_ram + + /* + * merge bank and col data together + */ + addw %di, %dx /* merge of bank and col info in dl */ + + /* + * fix ending addr mask based upon col info + */ + movb $0x03, %al + subb %dh, %al /* dh contains the overflow from the bank/col merge */ + movb %bl, %dh /* bl contains the row mask (aa, 07, 0f, 1f or 3f) */ + xchgw %cx, %ax /* cx = ax = 3 or 2 depending on 2 or 4 bank device */ + shrb %cl, %dh + incb %dh /* ending addr is 1 greater than real end */ + xchgw %cx, %ax /* cx is bank number again */ - cmpb %ah,%al /* verify all 4 bytes of dword same */ - jnz bad_ram - movl %eax,%ebx - shrl $16,%ebx - cmpw %bx,%ax - jnz bad_ram - /* - * read col 11 wrap adr for real column data value - */ - movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */ - movl (%esi), %eax /* read real col number at max col adr */ - /* - * validate column data - */ - cmpl $COL08_DATA, %eax /* col must be greater than 8 pattern */ - jb bad_ram - - cmpl $COL11_DATA, %eax /* and row must be less than 11 pattern */ - ja bad_ram - - subl $COL08_DATA, %eax /* normalize column data to zero */ - jc bad_ram - cmpb %ah,%al /* verify all 4 bytes of dword equal */ - jnz bad_ram - movl %eax,%edx - shrl $16,%edx - cmpw %dx,%ax - jnz bad_ram - /* - * merge bank and col data together - */ - addw %di,%dx /* merge of bank and col info in dl */ - /* - * fix ending addr mask based upon col info - */ - movb $3,%al - subb %dh,%al /* dh contains the overflow from the bank/col merge */ - movb %bl,%dh /* bl contains the row mask (aa, 07, 0f, 1f or 3f) */ - xchgw %cx,%ax /* cx = ax = 3 or 2 depending on 2 or 4 bank device */ - shrb %cl,%dh /* */ - incb %dh /* ending addr is 1 greater than real end */ - xchgw %cx,%ax /* cx is bank number again */ - /* - * issue all banks precharge - */ bad_reint: - movl $DRCCTL, %esi /* setup DRAM control register with */ - movb $0x2,%al /* All banks precharge */ - movb %al, (%esi) - movl $CACHELINESZ, %esi /* address to init read buffer */ - movw %ax, (%esi) + /* + * issue all banks precharge + */ + movl $DRCCTL, %esi /* setup DRAM control register with */ + movb $0x02, %al /* All banks precharge */ + movb %al, (%esi) + movl $CACHELINESZ, %esi /* address to init read buffer */ + movw %ax, (%esi) - /* - * update ENDING ADDRESS REGISTER - */ - movl $DRCBENDADR, %edi /* DRAM ending address register */ - movl %ecx,%ebx + /* + * update ENDING ADDRESS REGISTER + */ + movl $DRCBENDADR, %edi /* DRAM ending address register */ + movl %ecx, %ebx addl %ebx, %edi - movb %dh, (%edi) - /* - * update CONFIG REGISTER - */ - xorb %dh,%dh - movw $0x00f,%bx - movw %cx,%ax - shlw $2,%ax - xchgw %cx,%ax - shlw %cl,%dx - shlw %cl,%bx - notw %bx - xchgw %cx,%ax - movl $DRCCFG, %edi - mov (%edi), %ax - andw %bx,%ax - orw %dx,%ax - movw %ax, (%edi) - jcxz cleanup - - decw %cx - movl %ecx,%ebx - movl $DRCBENDADR, %edi /* DRAM ending address register */ - movb $0xff,%al + movb %dh, (%edi) + + /* + * update CONFIG REGISTER + */ + xorb %dh, %dh + movw $0x000f, %bx + movw %cx, %ax + shlw $2, %ax + xchgw %cx, %ax + shlw %cl, %dx + shlw %cl, %bx + notw %bx + xchgw %cx, %ax + movl $DRCCFG, %edi + movw (%edi), %ax + andw %bx, %ax + orw %dx, %ax + movw %ax, (%edi) + jcxz cleanup + + decw %cx + movl %ecx, %ebx + movl $DRCBENDADR, %edi /* DRAM ending address register */ + movb $0xff, %al addl %ebx, %edi - movb %al, (%edi) - /* - * set control register to NORMAL mode - */ - movl $DRCCTL, %esi /* setup DRAM control register with */ - movb $0x0,%al /* Normal mode value */ - movb %al, (%esi) - movl $CACHELINESZ, %esi /* address to init read buffer */ - movw %ax, (%esi) - jmp nextbank + movb %al, (%edi) + + /* + * set control register to NORMAL mode + */ + movl $DRCCTL, %esi /* setup DRAM control register with */ + movb $0x00, %al /* Normal mode value */ + movb %al, (%esi) + movl $CACHELINESZ, %esi /* address to init read buffer */ + movw %ax, (%esi) + jmp nextbank cleanup: - movl $DRCBENDADR, %edi /* DRAM ending address register */ - movw $4,%cx - xorw %ax,%ax + movl $DRCBENDADR, %edi /* DRAM ending address register */ + movw $0x04, %cx + xorw %ax, %ax cleanuplp: - movb (%edi), %al - orb %al,%al - jz emptybank + movb (%edi), %al + orb %al, %al + jz emptybank - addb %ah,%al - jns nottoomuch + addb %ah, %al + jns nottoomuch - movb $0x7f,%al + movb $0x7f, %al nottoomuch: - movb %al,%ah - orb $0x80,%al - movb %al, (%edi) + movb %al, %ah + orb $0x80, %al + movb %al, (%edi) emptybank: - incl %edi - loop cleanuplp + incl %edi + loop cleanuplp #if defined CONFIG_SYS_SDRAM_DRCTMCTL /* just have your hardware desinger _GIVE_ you what you need here! */ - movl $DRCTMCTL, %edi - movb $CONFIG_SYS_SDRAM_DRCTMCTL,%al - movb %al, (%edi) + movl $DRCTMCTL, %edi + movb $CONFIG_SYS_SDRAM_DRCTMCTL, %al + movb %al, (%edi) #else #if defined(CONFIG_SYS_SDRAM_CAS_LATENCY_2T) || defined(CONFIG_SYS_SDRAM_CAS_LATENCY_3T) - /* set the CAS latency now since it is hard to do - * when we run from the RAM */ - movl $DRCTMCTL, %edi /* DRAM timing register */ - movb (%edi), %al + /* + * Set the CAS latency now since it is hard to do + * when we run from the RAM + */ + movl $DRCTMCTL, %edi /* DRAM timing register */ + movb (%edi), %al #ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_2T - andb $0xef, %al + andb $0xef, %al #endif #ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_3T - orb $0x10, %al + orb $0x10, %al #endif - movb %al, (%edi) + movb %al, (%edi) #endif #endif - movl $DRCCTL, %edi /* DRAM Control register */ - movb $0x3,%al /* Load mode register cmd */ - movb %al, (%edi) - movw %ax, (%esi) + movl $DRCCTL, %edi /* DRAM Control register */ + movb $0x03, %al /* Load mode register cmd */ + movb %al, (%edi) + movw %ax, (%esi) - movl $DRCCTL, %edi /* DRAM Control register */ - movb $0x18,%al /* Enable refresh and NORMAL mode */ - movb %al, (%edi) + movl $DRCCTL, %edi /* DRAM Control register */ + movb $0x18, %al /* Enable refresh and NORMAL mode */ + movb %al, (%edi) - jmp dram_done + jmp dram_done bad_ram: - xorl %edx,%edx - xorl %edi,%edi - jmp bad_reint + xorl %edx, %edx + xorl %edi, %edi + jmp bad_reint dram_done: @@ -551,17 +534,17 @@ init_ecc: movl %ebx, %ebp /* A nominal memory test: just a byte at each address line */ - movl %eax, %ecx - shrl $0x1, %ecx + movl %eax, %ecx + shrl $0x1, %ecx movl $0x1, %edi memtest0: movb $0xa5, (%edi) - cmpb $0xa5, (%edi) + cmpb $0xa5, (%edi) jne out - shrl $1, %ecx - andl %ecx,%ecx + shrl $0x1, %ecx + andl %ecx, %ecx jz set_ecc - shll $1, %edi + shll $0x1, %edi jmp memtest0 set_ecc: @@ -570,21 +553,24 @@ set_ecc: xorl %esi, %esi xorl %edi, %edi xorl %eax, %eax - shrl $2, %ecx + shrl $0x2, %ecx cld rep stosl - /* enable read, write buffers */ - movb $0x11, %al - movl $DBCTL, %edi - movb %al, (%edi) - /* enable NMI mapping for ECC */ - movl $ECCINT, %edi - mov $0x10, %al - movb %al, (%edi) - /* Turn on ECC */ - movl $ECCCTL, %edi - mov $0x05, %al - movb %al, (%edi) + + /* enable read, write buffers */ + movb $0x11, %al + movl $DBCTL, %edi + movb %al, (%edi) + + /* enable NMI mapping for ECC */ + movl $ECCINT, %edi + movb $0x10, %al + movb %al, (%edi) + + /* Turn on ECC */ + movl $ECCCTL, %edi + movb $0x05, %al + movb %al,(%edi) #endif out: @@ -596,7 +582,7 @@ out: */ .globl get_mem_size get_mem_size: - movl $DRCBENDADR, %edi /* DRAM ending address register */ + movl $DRCBENDADR, %edi /* DRAM ending address register */ bank0: movl (%edi), %eax movl %eax, %ecx diff --git a/arch/i386/cpu/start.S b/arch/i386/cpu/start.S index 3cea04b..f67a1b7 100644 --- a/arch/i386/cpu/start.S +++ b/arch/i386/cpu/start.S @@ -45,7 +45,7 @@ _i386boot_start: /* Turn of cache (this might require a 486-class CPU) */ movl %cr0, %eax - orl $0x60000000,%eax + orl $0x60000000, %eax movl %eax, %cr0 wbinvd @@ -54,13 +54,13 @@ _i386boot_start: _start: /* This is the 32-bit cold-reset entry point */ - movl $0x18,%eax /* Load our segement registes, the + movl $0x18, %eax /* Load our segement registes, the * gdt have already been loaded by start16.S */ - movw %ax,%fs - movw %ax,%ds - movw %ax,%gs - movw %ax,%es - movw %ax,%ss + movw %ax, %fs + movw %ax, %ds + movw %ax, %gs + movw %ax, %es + movw %ax, %ss /* Clear the interupt vectors */ lidt blank_idt_ptr @@ -79,7 +79,7 @@ _start: * to store the return address */ /* Early platform init (setup gpio, etc ) */ - mov $early_board_init_ret, %ebp + mov $early_board_init_ret, %ebp jmp early_board_init early_board_init_ret: @@ -92,12 +92,12 @@ early_board_init_ret: /* size memory */ mov $mem_init_ret, %ebp - jmp mem_init + jmp mem_init mem_init_ret: /* fetch memory size (into %eax) */ mov $get_mem_size_ret, %ebp - jmp get_mem_size + jmp get_mem_size get_mem_size_ret: /* Check we have enough memory for stack */ @@ -113,7 +113,7 @@ get_mem_size_ret: jmp die mem_ok: /* Set stack pointer to upper memory limit*/ - movl %eax, %esp + movl %eax, %esp /* indicate progress */ movw $0x02, %ax @@ -150,12 +150,12 @@ stack_ok: wbinvd /* Get upper memory limit */ - movl %esp, %ecx - subl $CONFIG_SYS_STACK_SIZE, %ecx + movl %esp, %ecx + subl $CONFIG_SYS_STACK_SIZE, %ecx /* Create a Stack Frame */ - pushl %ebp - movl %esp, %ebp + pushl %ebp + movl %esp, %ebp /* stack_limit parameter */ pushl %ecx diff --git a/arch/i386/cpu/start16.S b/arch/i386/cpu/start16.S index ebe5835..2a5cca9 100644 --- a/arch/i386/cpu/start16.S +++ b/arch/i386/cpu/start16.S @@ -31,7 +31,8 @@ .code16 .globl start16 start16: - /* First we let the BSP do some early initialization + /* + * First we let the BSP do some early initialization * this code have to map the flash to its final position */ mov $board_init16_ret, %bp @@ -40,7 +41,7 @@ board_init16_ret: /* Turn of cache (this might require a 486-class CPU) */ movl %cr0, %eax - orl $0x60000000,%eax + orl $0x60000000, %eax movl %eax, %cr0 wbinvd @@ -50,7 +51,7 @@ o32 cs lgdt gdt_ptr /* Now, we enter protected mode */ movl %cr0, %eax - orl $1,%eax + orl $1, %eax movl %eax, %cr0 /* Flush the prefetch queue */ @@ -61,7 +62,7 @@ ff: /* Finally jump to the 32bit initialization code */ movw $code32start, %ax - movw %ax,%bp + movw %ax, %bp o32 cs ljmp *(%bp) /* 48-bit far pointer */ |