diff options
Diffstat (limited to 'arch/blackfin/cpu/serial1.h')
| -rw-r--r-- | arch/blackfin/cpu/serial1.h | 342 |
1 files changed, 0 insertions, 342 deletions
diff --git a/arch/blackfin/cpu/serial1.h b/arch/blackfin/cpu/serial1.h deleted file mode 100644 index 467d381..0000000 --- a/arch/blackfin/cpu/serial1.h +++ /dev/null @@ -1,342 +0,0 @@ -/* - * serial.h - common serial defines for early debug and serial driver. - * any functions defined here must be always_inline since - * initcode cannot have function calls. - * - * Copyright (c) 2004-2011 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef __BFIN_CPU_SERIAL1_H__ -#define __BFIN_CPU_SERIAL1_H__ - -#include <asm/mach-common/bits/uart.h> - -#ifndef __ASSEMBLY__ - -#include <asm/clock.h> - -#define MMR_UART(n) _PASTE_UART(n, UART, DLL) -#ifdef UART_DLL -# define UART0_DLL UART_DLL -# if CONFIG_UART_CONSOLE != 0 -# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART -# endif -#endif -#define UART_BASE MMR_UART(CONFIG_UART_CONSOLE) - -#define LOB(x) ((x) & 0xFF) -#define HIB(x) (((x) >> 8) & 0xFF) - -/* - * All Blackfin system MMRs are padded to 32bits even if the register - * itself is only 16bits. So use a helper macro to streamline this. - */ -struct bfin_mmr_serial { -#if BFIN_UART_HW_VER == 2 - u16 dll; - u16 __pad_0; - u16 dlh; - u16 __pad_1; - u16 gctl; - u16 __pad_2; - u16 lcr; - u16 __pad_3; - u16 mcr; - u16 __pad_4; - u16 lsr; - u16 __pad_5; - u16 msr; - u16 __pad_6; - u16 scr; - u16 __pad_7; - u16 ier_set; - u16 __pad_8; - u16 ier_clear; - u16 __pad_9; - u16 thr; - u16 __pad_10; - u16 rbr; - u16 __pad_11; -#else - union { - u16 dll; - u16 thr; - const u16 rbr; - }; - const u16 __spad0; - union { - u16 dlh; - u16 ier; - }; - const u16 __spad1; - const u16 iir; - u16 __pad_0; - u16 lcr; - u16 __pad_1; - u16 mcr; - u16 __pad_2; - u16 lsr; - u16 __pad_3; - u16 msr; - u16 __pad_4; - u16 scr; - u16 __pad_5; - const u32 __spad2; - u16 gctl; - u16 __pad_6; -#endif -}; - -#define uart_lsr_t uint32_t -#define _lsr_read(p) bfin_read(&p->lsr) -#define _lsr_write(p, v) bfin_write(&p->lsr, v) - -#if BFIN_UART_HW_VER == 2 -# define ACCESS_LATCH() -# define ACCESS_PORT_IER() -#else -# define ACCESS_LATCH() bfin_write_or(&pUART->lcr, DLAB) -# define ACCESS_PORT_IER() bfin_write_and(&pUART->lcr, ~DLAB) -#endif - -__attribute__((always_inline)) -static inline void serial_early_do_mach_portmux(char port, int mux_mask, - int mux_func, int port_pin) -{ - switch (port) { -#if defined(__ADSPBF54x__) - case 'B': - bfin_write_PORTB_MUX((bfin_read_PORTB_MUX() & - ~mux_mask) | mux_func); - bfin_write_PORTB_FER(bfin_read_PORTB_FER() | port_pin); - break; - case 'E': - bfin_write_PORTE_MUX((bfin_read_PORTE_MUX() & - ~mux_mask) | mux_func); - bfin_write_PORTE_FER(bfin_read_PORTE_FER() | port_pin); - break; -#endif -#if defined(__ADSPBF50x__) || defined(__ADSPBF51x__) || defined(__ADSPBF52x__) - case 'F': - bfin_write_PORTF_MUX((bfin_read_PORTF_MUX() & - ~mux_mask) | mux_func); - bfin_write_PORTF_FER(bfin_read_PORTF_FER() | port_pin); - break; - case 'G': - bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & - ~mux_mask) | mux_func); - bfin_write_PORTG_FER(bfin_read_PORTG_FER() | port_pin); - break; - case 'H': - bfin_write_PORTH_MUX((bfin_read_PORTH_MUX() & - ~mux_mask) | mux_func); - bfin_write_PORTH_FER(bfin_read_PORTH_FER() | port_pin); - break; -#endif - default: - break; - } -} - -__attribute__((always_inline)) -static inline void serial_early_do_portmux(void) -{ -#if defined(__ADSPBF50x__) - switch (CONFIG_UART_CONSOLE) { - case 0: - serial_early_do_mach_portmux('G', PORT_x_MUX_7_MASK, - PORT_x_MUX_7_FUNC_1, PG12); /* TX: G; mux 7; func 1; PG12 */ - serial_early_do_mach_portmux('G', PORT_x_MUX_7_MASK, - PORT_x_MUX_7_FUNC_1, PG13); /* RX: G; mux 7; func 1; PG13 */ - break; - case 1: - serial_early_do_mach_portmux('F', PORT_x_MUX_3_MASK, - PORT_x_MUX_3_FUNC_1, PF7); /* TX: F; mux 3; func 1; PF6 */ - serial_early_do_mach_portmux('F', PORT_x_MUX_3_MASK, - PORT_x_MUX_3_FUNC_1, PF6); /* RX: F; mux 3; func 1; PF7 */ - break; - } -#elif defined(__ADSPBF51x__) - switch (CONFIG_UART_CONSOLE) { - case 0: - serial_early_do_mach_portmux('G', PORT_x_MUX_5_MASK, - PORT_x_MUX_5_FUNC_2, PG9); /* TX: G; mux 5; func 2; PG9 */ - serial_early_do_mach_portmux('G', PORT_x_MUX_5_MASK, - PORT_x_MUX_5_FUNC_2, PG10); /* RX: G; mux 5; func 2; PG10 */ - break; - case 1: - serial_early_do_mach_portmux('H', PORT_x_MUX_3_MASK, - PORT_x_MUX_3_FUNC_2, PH7); /* TX: H; mux 3; func 2; PH6 */ - serial_early_do_mach_portmux('H', PORT_x_MUX_3_MASK, - PORT_x_MUX_3_FUNC_2, PH6); /* RX: H; mux 3; func 2; PH7 */ - break; - } -#elif defined(__ADSPBF52x__) - switch (CONFIG_UART_CONSOLE) { - case 0: - serial_early_do_mach_portmux('G', PORT_x_MUX_2_MASK, - PORT_x_MUX_2_FUNC_3, PG7); /* TX: G; mux 2; func 3; PG7 */ - serial_early_do_mach_portmux('G', PORT_x_MUX_2_MASK, - PORT_x_MUX_2_FUNC_3, PG8); /* RX: G; mux 2; func 3; PG8 */ - break; - case 1: - serial_early_do_mach_portmux('F', PORT_x_MUX_5_MASK, - PORT_x_MUX_5_FUNC_3, PF14); /* TX: F; mux 5; func 3; PF14 */ - serial_early_do_mach_portmux('F', PORT_x_MUX_5_MASK, - PORT_x_MUX_5_FUNC_3, PF15); /* RX: F; mux 5; func 3; PF15 */ - break; - } -#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) - const uint16_t func[] = { PFDE, PFTE, }; - bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~func[CONFIG_UART_CONSOLE]); - bfin_write_PORTF_FER(bfin_read_PORTF_FER() | - (1 << P_IDENT(P_UART(RX))) | - (1 << P_IDENT(P_UART(TX)))); -#elif defined(__ADSPBF54x__) - switch (CONFIG_UART_CONSOLE) { - case 0: - serial_early_do_mach_portmux('E', PORT_x_MUX_7_MASK, - PORT_x_MUX_7_FUNC_1, PE7); /* TX: E; mux 7; func 1; PE7 */ - serial_early_do_mach_portmux('E', PORT_x_MUX_8_MASK, - PORT_x_MUX_8_FUNC_1, PE8); /* RX: E; mux 8; func 1; PE8 */ - break; - case 1: - serial_early_do_mach_portmux('H', PORT_x_MUX_0_MASK, - PORT_x_MUX_0_FUNC_1, PH0); /* TX: H; mux 0; func 1; PH0 */ - serial_early_do_mach_portmux('H', PORT_x_MUX_1_MASK, - PORT_x_MUX_1_FUNC_1, PH1); /* RX: H; mux 1; func 1; PH1 */ - break; - case 2: - serial_early_do_mach_portmux('B', PORT_x_MUX_4_MASK, - PORT_x_MUX_4_FUNC_1, PB4); /* TX: B; mux 4; func 1; PB4 */ - serial_early_do_mach_portmux('B', PORT_x_MUX_5_MASK, - PORT_x_MUX_5_FUNC_1, PB5); /* RX: B; mux 5; func 1; PB5 */ - break; - case 3: - serial_early_do_mach_portmux('B', PORT_x_MUX_6_MASK, - PORT_x_MUX_6_FUNC_1, PB6); /* TX: B; mux 6; func 1; PB6 */ - serial_early_do_mach_portmux('B', PORT_x_MUX_7_MASK, - PORT_x_MUX_7_FUNC_1, PB7); /* RX: B; mux 7; func 1; PB7 */ - break; - } -#elif defined(__ADSPBF561__) - /* UART pins could be GPIO, but they aren't pin muxed. */ -#else -# if (P_UART(RX) & P_DEFINED) || (P_UART(TX) & P_DEFINED) -# error "missing portmux logic for UART" -# endif -#endif - SSYNC(); -} - -__attribute__((always_inline)) -static inline int uart_init(uint32_t uart_base) -{ - /* always enable UART -- avoids anomalies 05000309 and 05000350 */ - bfin_write(&pUART->gctl, UCEN); - - /* Set LCR to Word Lengh 8-bit word select */ - bfin_write(&pUART->lcr, WLS_8); - - SSYNC(); - - return 0; -} - -__attribute__((always_inline)) -static inline int serial_early_init(uint32_t uart_base) -{ - /* handle portmux crap on different Blackfins */ - serial_do_portmux(); - - return uart_init(uart_base); -} - -__attribute__((always_inline)) -static inline int serial_early_uninit(uint32_t uart_base) -{ - /* disable the UART by clearing UCEN */ - bfin_write(&pUART->gctl, 0); - - return 0; -} - -__attribute__((always_inline)) -static inline void serial_set_divisor(uint32_t uart_base, uint16_t divisor) -{ - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH(); - SSYNC(); - - /* Program the divisor to get the baud rate we want */ - bfin_write(&pUART->dll, LOB(divisor)); - bfin_write(&pUART->dlh, HIB(divisor)); - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER(); - SSYNC(); -} - -__attribute__((always_inline)) -static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) -{ - /* Translate from baud into divisor in terms of SCLK. The - * weird multiplication is to make sure we over sample just - * a little rather than under sample the incoming signals. - */ -#if CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS - uint16_t divisor = (early_get_uart_clk() + baud * 8) / (baud * 16) - - ANOMALY_05000230; -#else - uint16_t divisor = early_division(early_get_uart_clk() + (baud * 8), - baud * 16) - ANOMALY_05000230; -#endif - - serial_set_divisor(uart_base, divisor); -} - -__attribute__((always_inline)) -static inline void serial_early_put_div(uint16_t divisor) -{ - uint32_t uart_base = UART_BASE; - - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH(); - SSYNC(); - - /* Program the divisor to get the baud rate we want */ - bfin_write(&pUART->dll, LOB(divisor)); - bfin_write(&pUART->dlh, HIB(divisor)); - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER(); - SSYNC(); -} - -__attribute__((always_inline)) -static inline uint16_t serial_early_get_div(void) -{ - uint32_t uart_base = UART_BASE; - - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH(); - SSYNC(); - - uint8_t dll = bfin_read(&pUART->dll); - uint8_t dlh = bfin_read(&pUART->dlh); - uint16_t divisor = (dlh << 8) | dll; - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER(); - SSYNC(); - - return divisor; -} - -#endif - -#endif |