diff options
Diffstat (limited to 'arch/blackfin/cpu/serial.h')
| -rw-r--r-- | arch/blackfin/cpu/serial.h | 263 |
1 files changed, 263 insertions, 0 deletions
diff --git a/arch/blackfin/cpu/serial.h b/arch/blackfin/cpu/serial.h new file mode 100644 index 0000000..5f9be86 --- /dev/null +++ b/arch/blackfin/cpu/serial.h @@ -0,0 +1,263 @@ +/* + * serial.h - common serial defines for early debug and serial driver. + * any functions defined here must be always_inline since + * initcode cannot have function calls. + * + * Copyright (c) 2004-2007 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_CPU_SERIAL_H__ +#define __BFIN_CPU_SERIAL_H__ + +#include <asm/blackfin.h> +#include <asm/mach-common/bits/uart.h> + +#ifndef CONFIG_UART_CONSOLE +# define CONFIG_UART_CONSOLE 0 +#endif + +#ifdef CONFIG_DEBUG_EARLY_SERIAL +# define BFIN_DEBUG_EARLY_SERIAL 1 +#else +# define BFIN_DEBUG_EARLY_SERIAL 0 +#endif + +#ifndef __ASSEMBLY__ + +#define LOB(x) ((x) & 0xFF) +#define HIB(x) (((x) >> 8) & 0xFF) + +/* + * All Blackfin system MMRs are padded to 32bits even if the register + * itself is only 16bits. So use a helper macro to streamline this. + */ +#define __BFP(m) u16 m; u16 __pad_##m +struct bfin_mmr_serial { +#ifdef __ADSPBF54x__ + __BFP(dll); + __BFP(dlh); + __BFP(gctl); + __BFP(lcr); + __BFP(mcr); + __BFP(lsr); + __BFP(msr); + __BFP(scr); + __BFP(ier_set); + __BFP(ier_clear); + __BFP(thr); + __BFP(rbr); +#else + union { + u16 dll; + u16 thr; + const u16 rbr; + }; + const u16 __spad0; + union { + u16 dlh; + u16 ier; + }; + const u16 __spad1; + const __BFP(iir); + __BFP(lcr); + __BFP(mcr); + __BFP(lsr); + __BFP(msr); + __BFP(scr); + const u32 __spad2; + __BFP(gctl); +#endif +}; +#undef __BFP + +#ifndef UART_LSR +# if (CONFIG_UART_CONSOLE == 3) +# define UART_BASE UART3_DLL +# elif (CONFIG_UART_CONSOLE == 2) +# define UART_BASE UART2_DLL +# elif (CONFIG_UART_CONSOLE == 1) +# define UART_BASE UART1_DLL +# elif (CONFIG_UART_CONSOLE == 0) +# define UART_BASE UART0_DLL +# endif +#else +# if CONFIG_UART_CONSOLE != 0 +# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART +# endif +# define UART_BASE UART_DLL +#endif +#define pUART ((volatile struct bfin_mmr_serial *)UART_BASE) + +#ifdef __ADSPBF54x__ +# define ACCESS_LATCH() +# define ACCESS_PORT_IER() +#else +# define ACCESS_LATCH() \ + bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) | DLAB) +# define ACCESS_PORT_IER() \ + bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) & ~DLAB) +#endif + +__attribute__((always_inline)) +static inline void serial_do_portmux(void) +{ +#if defined(__ADSPBF51x__) +# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \ + bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_2 | PORT_x_MUX_##mux_rx##_FUNC_2); \ + bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); + switch (CONFIG_UART_CONSOLE) { + case 0: DO_MUX(G, 5, 5, 9, 10); break; /* Port G; mux 5; PG9 and PG10 */ + case 1: DO_MUX(F, 2, 3, 14, 15); break; /* Port H; mux 2/3; PH14 and PH15 */ + } + SSYNC(); +#elif defined(__ADSPBF52x__) +# define DO_MUX(port, mux, tx, rx) \ + bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_3); \ + bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); + switch (CONFIG_UART_CONSOLE) { + case 0: DO_MUX(G, 2, 7, 8); break; /* Port G; mux 2; PG2 and PG8 */ + case 1: DO_MUX(F, 5, 14, 15); break; /* Port F; mux 5; PF14 and PF15 */ + } + SSYNC(); +#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) +# define DO_MUX(func, tx, rx) \ + bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~(func)); \ + bfin_write_PORTF_FER(bfin_read_PORTF_FER() | PF##tx | PF##rx); + switch (CONFIG_UART_CONSOLE) { + case 0: DO_MUX(PFDE, 0, 1); break; + case 1: DO_MUX(PFTE, 2, 3); break; + } + SSYNC(); +#elif defined(__ADSPBF54x__) +# define DO_MUX(port, tx, rx) \ + bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##tx##_MASK | PORT_x_MUX_##rx##_MASK)) | PORT_x_MUX_##tx##_FUNC_1 | PORT_x_MUX_##rx##_FUNC_1); \ + bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); + switch (CONFIG_UART_CONSOLE) { + case 0: DO_MUX(E, 7, 8); break; /* Port E; PE7 and PE8 */ + case 1: DO_MUX(H, 0, 1); break; /* Port H; PH0 and PH1 */ + case 2: DO_MUX(B, 4, 5); break; /* Port B; PB4 and PB5 */ + case 3: DO_MUX(B, 6, 7); break; /* Port B; PB6 and PB7 */ + } + SSYNC(); +#endif +} + +__attribute__((always_inline)) +static inline void serial_early_init(void) +{ + /* handle portmux crap on different Blackfins */ + serial_do_portmux(); + + /* always enable UART -- avoids anomalies 05000309 and 05000350 */ + bfin_write16(&pUART->gctl, UCEN); + + /* Set LCR to Word Lengh 8-bit word select */ + bfin_write16(&pUART->lcr, WLS_8); + + SSYNC(); +} + +__attribute__((always_inline)) +static inline void serial_early_put_div(uint16_t divisor) +{ + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); + + /* Program the divisor to get the baud rate we want */ + bfin_write16(&pUART->dll, LOB(divisor)); + bfin_write16(&pUART->dlh, HIB(divisor)); + SSYNC(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); +} + +__attribute__((always_inline)) +static inline uint16_t serial_early_get_div(void) +{ + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); + + uint8_t dll = bfin_read16(&pUART->dll); + uint8_t dlh = bfin_read16(&pUART->dlh); + uint16_t divisor = (dlh << 8) | dll; + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); + + return divisor; +} + +/* We cannot use get_sclk() early on as it uses caches in external memory */ +#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL) +# define get_sclk() (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV) +#endif + +__attribute__((always_inline)) +static inline void serial_early_set_baud(uint32_t baud) +{ + /* Translate from baud into divisor in terms of SCLK. The + * weird multiplication is to make sure we over sample just + * a little rather than under sample the incoming signals. + */ + serial_early_put_div((get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230); +} + +#ifndef BFIN_IN_INITCODE +__attribute__((always_inline)) +static inline void serial_early_puts(const char *s) +{ + if (BFIN_DEBUG_EARLY_SERIAL) { + serial_puts("Early: "); + serial_puts(s); + } +} +#endif + +#else + +.macro serial_early_init +#ifdef CONFIG_DEBUG_EARLY_SERIAL + call _serial_initialize; +#endif +.endm + +.macro serial_early_set_baud +#ifdef CONFIG_DEBUG_EARLY_SERIAL + R0.L = LO(CONFIG_BAUDRATE); + R0.H = HI(CONFIG_BAUDRATE); + call _serial_set_baud; +#endif +.endm + +/* Since we embed the string right into our .text section, we need + * to find its address. We do this by getting our PC and adding 2 + * bytes (which is the length of the jump instruction). Then we + * pass this address to serial_puts(). + */ +#ifdef CONFIG_DEBUG_EARLY_SERIAL +# define serial_early_puts(str) \ + call _get_pc; \ + jump 1f; \ + .ascii "Early:"; \ + .ascii __FILE__; \ + .ascii ": "; \ + .ascii str; \ + .asciz "\n"; \ + .align 4; \ +1: \ + R0 += 2; \ + call _serial_puts; +#else +# define serial_early_puts(str) +#endif + +#endif + +#endif |