summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/cpu/armv7/sunxi/board.c8
-rw-r--r--arch/arm/dts/Makefile1
-rw-r--r--arch/arm/dts/sun8i-a33-q8-tablet.dts65
-rw-r--r--arch/arm/dts/sun8i-q8-common.dtsi84
-rw-r--r--arch/arm/include/asm/arch-sunxi/spl.h54
-rw-r--r--arch/arm/mach-mvebu/cpu.c36
-rw-r--r--arch/arm/mach-mvebu/timer.c2
7 files changed, 217 insertions, 33 deletions
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index b40198b..d11365b 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -21,6 +21,7 @@
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
+#include <asm/arch/spl.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/timer.h>
#include <asm/arch/tzpc.h>
@@ -152,7 +153,7 @@ u32 spl_boot_device(void)
* binary over USB. If it is found, it determines where SPL was
* read from.
*/
- if (readl(4) != 0x4E4F4765 || readl(8) != 0x3054422E) /* eGON.BT0 */
+ if (!is_boot0_magic(SPL_ADDR + 4)) /* eGON.BT0 */
return BOOT_DEVICE_BOARD;
/* The BROM will try to boot from mmc0 first, so try that first. */
@@ -198,11 +199,6 @@ void board_init_f(ulong dummy)
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
sunxi_board_init();
-
- /* Clear the BSS. */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
- board_init_r(NULL, 0);
}
#endif
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5f10243..6a11b12 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -158,6 +158,7 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
sun8i-a33-et-q8-v1.6.dtb \
sun8i-a33-ga10h-v1.1.dtb \
sun8i-a33-ippo-q8h-v1.2.dtb \
+ sun8i-a33-q8-tablet.dtb \
sun8i-a33-sinlinx-sina33.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
diff --git a/arch/arm/dts/sun8i-a33-q8-tablet.dts b/arch/arm/dts/sun8i-a33-q8-tablet.dts
new file mode 100644
index 0000000..44b3229
--- /dev/null
+++ b/arch/arm/dts/sun8i-a33-q8-tablet.dts
@@ -0,0 +1,65 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+ model = "Q8 A33 Tablet";
+ compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
+};
+
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+ *
+ * Once we have axp223 support we should switch to fully supporting otg.
+ */
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
diff --git a/arch/arm/dts/sun8i-q8-common.dtsi b/arch/arm/dts/sun8i-q8-common.dtsi
new file mode 100644
index 0000000..07cd268
--- /dev/null
+++ b/arch/arm/dts/sun8i-q8-common.dtsi
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-q8-common.dtsi"
+
+/ {
+ aliases {
+ serial0 = &r_uart;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
+ vmmc-supply = <&reg_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ bl_en_pin_q8: bl_en_pin@0 {
+ allwinner,pins = "PH6";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_cd_pin_q8: mmc0_cd_pin@0 {
+ allwinner,pins = "PB4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h
index acbec46..a129dd4 100644
--- a/arch/arm/include/asm/arch-sunxi/spl.h
+++ b/arch/arm/include/asm/arch-sunxi/spl.h
@@ -1,20 +1,50 @@
/*
- * This is a copy of omap3/spl.h:
- *
- * (C) Copyright 2012
- * Texas Instruments, <www.ti.com>
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _ASM_ARCH_SPL_H_
#define _ASM_ARCH_SPL_H_
-#define BOOT_DEVICE_NONE 0
-#define BOOT_DEVICE_XIP 1
-#define BOOT_DEVICE_NAND 2
-#define BOOT_DEVICE_ONE_NAND 3
-#define BOOT_DEVICE_MMC2 5 /*emmc*/
-#define BOOT_DEVICE_MMC1 6
-#define BOOT_DEVICE_XIPWAIT 7
-#define BOOT_DEVICE_MMC2_2 0xff
+#define BOOT0_MAGIC "eGON.BT0"
+#define SPL_SIGNATURE "SPL" /* marks "sunxi" SPL header */
+#define SPL_HEADER_VERSION 1
+
+/* Note: A80 will require special handling here: SPL_ADDR 0x10000 */
+#define SPL_ADDR 0x0
+
+/* boot head definition from sun4i boot code */
+struct boot_file_head {
+ uint32_t b_instruction; /* one intruction jumping to real code */
+ uint8_t magic[8]; /* ="eGON.BT0" or "eGON.BT1", not C-style str */
+ uint32_t check_sum; /* generated by PC */
+ uint32_t length; /* generated by PC */
+ /*
+ * We use a simplified header, only filling in what is needed
+ * by the boot ROM. To be compatible with Allwinner tools we
+ * would need to implement the proper fields here instead of
+ * padding.
+ *
+ * Actually we want the ability to recognize our "sunxi" variant
+ * of the SPL. To do so, let's place a special signature into the
+ * "pub_head_size" field. We can reasonably expect Allwinner's
+ * boot0 to always have the upper 16 bits of this set to 0 (after
+ * all the value shouldn't be larger than the limit imposed by
+ * SRAM size).
+ * If the signature is present (at 0x14), then we know it's safe
+ * to use the remaining 8 bytes (at 0x18) for our own purposes.
+ * (E.g. sunxi-tools "fel" utility can pass information there.)
+ */
+ union {
+ uint32_t pub_head_size;
+ uint8_t spl_signature[4];
+ };
+ uint32_t fel_script_address;
+ uint32_t reserved; /* padding, align to 32 bytes */
+};
+
+#define is_boot0_magic(addr) (memcmp((void *)addr, BOOT0_MAGIC, 8) == 0)
+
#endif
diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c
index ea83e21..efd4d04 100644
--- a/arch/arm/mach-mvebu/cpu.c
+++ b/arch/arm/mach-mvebu/cpu.c
@@ -214,32 +214,40 @@ static void setup_usb_phys(void)
int arch_cpu_init(void)
{
-#ifndef CONFIG_SPL_BUILD
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_ARMADA_38X)
+ /*
+ * Only with disabled MMU its possible to switch the base
+ * register address on Armada 38x. Without this the SDRAM
+ * located at >= 0x4000.0000 is also not accessible, as its
+ * still locked to cache.
+ */
+ mmu_disable();
+#endif
+
+ /* Linux expects the internal registers to be at 0xf1000000 */
+ writel(SOC_REGS_PHY_BASE, INTREG_BASE_ADDR_REG);
+ set_cbar(SOC_REGS_PHY_BASE + 0xC000);
+
+#if !defined(CONFIG_SPL_BUILD)
+ /*
+ * From this stage on, the SoC detection is working. As we have
+ * configured the internal register base to the value used
+ * in the macros / defines in the U-Boot header (soc.h).
+ */
if (mvebu_soc_family() == MVEBU_SOC_A38X) {
struct pl310_regs *const pl310 =
(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
/*
- * Only with disabled MMU its possible to switch the base
- * register address on Armada 38x. Without this the SDRAM
- * located at >= 0x4000.0000 is also not accessible, as its
- * still locked to cache.
- *
- * So to fully release / unlock this area from cache, we need
- * to first flush all caches, then disable the MMU and
- * disable the L2 cache.
+ * To fully release / unlock this area from cache, we need
+ * to flush all caches and disable the L2 cache.
*/
icache_disable();
dcache_disable();
- mmu_disable();
clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
}
#endif
- /* Linux expects the internal registers to be at 0xf1000000 */
- writel(SOC_REGS_PHY_BASE, INTREG_BASE_ADDR_REG);
- set_cbar(SOC_REGS_PHY_BASE + 0xC000);
-
/*
* We need to call mvebu_mbus_probe() before calling
* update_sdram_window_sizes() as it disables all previously
diff --git a/arch/arm/mach-mvebu/timer.c b/arch/arm/mach-mvebu/timer.c
index c516c41..5449a89 100644
--- a/arch/arm/mach-mvebu/timer.c
+++ b/arch/arm/mach-mvebu/timer.c
@@ -41,7 +41,7 @@
#define timestamp gd->arch.tbl
#define lastdec gd->arch.lastinc
-static int init_done;
+static int init_done __attribute__((section(".data"))) = 0;
/* Timer reload and current value registers */
struct kwtmr_val {
generated by cgit v1.1 at 2024-11-13 18:33:51 +0000