diff options
Diffstat (limited to 'arch/arm')
30 files changed, 587 insertions, 219 deletions
diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c index 8912098..0b1a8f4 100644 --- a/arch/arm/cpu/arm926ejs/mx25/generic.c +++ b/arch/arm/cpu/arm926ejs/mx25/generic.c @@ -13,6 +13,7 @@ #include <div64.h> #include <netdev.h> #include <asm/io.h> +#include <asm/arch-imx/cpu.h> #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> diff --git a/arch/arm/cpu/arm926ejs/mxs/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c index e9d8800..9491096 100644 --- a/arch/arm/cpu/arm926ejs/mxs/clock.c +++ b/arch/arm/cpu/arm926ejs/mxs/clock.c @@ -309,7 +309,7 @@ void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq) bus, tgtclk, freq); } -void mxs_set_lcdclk(uint32_t freq) +void mxs_set_lcdclk(uint32_t __maybe_unused lcd_base, uint32_t freq) { struct mxs_clkctrl_regs *clkctrl_regs = (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig index 0b02e9e..273e209 100644 --- a/arch/arm/cpu/armv7/mx6/Kconfig +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -23,10 +23,12 @@ config MX6SL bool config MX6SX + select ROM_UNIFIED_SECTIONS bool config MX6UL select SYS_L2CACHE_OFF + select ROM_UNIFIED_SECTIONS bool choice diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile index bf6effc..8af191d 100644 --- a/arch/arm/cpu/armv7/mx6/Makefile +++ b/arch/arm/cpu/armv7/mx6/Makefile @@ -9,5 +9,4 @@ obj-y := soc.o clock.o obj-$(CONFIG_SPL_BUILD) += ddr.o -obj-$(CONFIG_SECURE_BOOT) += hab.o obj-$(CONFIG_MP) += mp.o diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index 11efd12..67e0f32 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -473,6 +473,251 @@ static u32 get_mmdc_ch0_clk(void) } } +#if defined(CONFIG_VIDEO_MXS) +static int enable_pll_video(u32 pll_div, u32 pll_num, u32 pll_denom, + u32 post_div) +{ + u32 reg = 0; + ulong start; + + debug("pll5 div = %d, num = %d, denom = %d\n", + pll_div, pll_num, pll_denom); + + /* Power up PLL5 video */ + writel(BM_ANADIG_PLL_VIDEO_POWERDOWN | + BM_ANADIG_PLL_VIDEO_BYPASS | + BM_ANADIG_PLL_VIDEO_DIV_SELECT | + BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT, + &imx_ccm->analog_pll_video_clr); + + /* Set div, num and denom */ + switch (post_div) { + case 1: + writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) | + BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x2), + &imx_ccm->analog_pll_video_set); + break; + case 2: + writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) | + BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x1), + &imx_ccm->analog_pll_video_set); + break; + case 4: + writel(BF_ANADIG_PLL_VIDEO_DIV_SELECT(pll_div) | + BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0x0), + &imx_ccm->analog_pll_video_set); + break; + default: + puts("Wrong test_div!\n"); + return -EINVAL; + } + + writel(BF_ANADIG_PLL_VIDEO_NUM_A(pll_num), + &imx_ccm->analog_pll_video_num); + writel(BF_ANADIG_PLL_VIDEO_DENOM_B(pll_denom), + &imx_ccm->analog_pll_video_denom); + + /* Wait PLL5 lock */ + start = get_timer(0); /* Get current timestamp */ + + do { + reg = readl(&imx_ccm->analog_pll_video); + if (reg & BM_ANADIG_PLL_VIDEO_LOCK) { + /* Enable PLL out */ + writel(BM_ANADIG_PLL_VIDEO_ENABLE, + &imx_ccm->analog_pll_video_set); + return 0; + } + } while (get_timer(0) < (start + 10)); /* Wait 10ms */ + + puts("Lock PLL5 timeout\n"); + + return -ETIME; +} + +/* + * 24M--> PLL_VIDEO -> LCDIFx_PRED -> LCDIFx_PODF -> LCD + * + * 'freq' using KHz as unit, see driver/video/mxsfb.c. + */ +void mxs_set_lcdclk(u32 base_addr, u32 freq) +{ + u32 reg = 0; + u32 hck = MXC_HCLK / 1000; + /* DIV_SELECT ranges from 27 to 54 */ + u32 min = hck * 27; + u32 max = hck * 54; + u32 temp, best = 0; + u32 i, j, max_pred = 8, max_postd = 8, pred = 1, postd = 1; + u32 pll_div, pll_num, pll_denom, post_div = 1; + + debug("mxs_set_lcdclk, freq = %dKHz\n", freq); + + if ((!is_cpu_type(MXC_CPU_MX6SX)) && !is_cpu_type(MXC_CPU_MX6UL)) { + debug("This chip not support lcd!\n"); + return; + } + + if (base_addr == LCDIF1_BASE_ADDR) { + reg = readl(&imx_ccm->cscdr2); + /* Can't change clocks when clock not from pre-mux */ + if ((reg & MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK) != 0) + return; + } + + if (is_cpu_type(MXC_CPU_MX6SX)) { + reg = readl(&imx_ccm->cscdr2); + /* Can't change clocks when clock not from pre-mux */ + if ((reg & MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK) != 0) + return; + } + + temp = freq * max_pred * max_postd; + if (temp > max) { + puts("Please decrease freq, too large!\n"); + return; + } + if (temp < min) { + /* + * Register: PLL_VIDEO + * Bit Field: POST_DIV_SELECT + * 00 — Divide by 4. + * 01 — Divide by 2. + * 10 — Divide by 1. + * 11 — Reserved + * No need to check post_div(1) + */ + for (post_div = 2; post_div <= 4; post_div <<= 1) { + if ((temp * post_div) > min) { + freq *= post_div; + break; + } + } + + if (post_div > 4) { + printf("Fail to set rate to %dkhz", freq); + return; + } + } + + /* Choose the best pred and postd to match freq for lcd */ + for (i = 1; i <= max_pred; i++) { + for (j = 1; j <= max_postd; j++) { + temp = freq * i * j; + if (temp > max || temp < min) + continue; + if (best == 0 || temp < best) { + best = temp; + pred = i; + postd = j; + } + } + } + + if (best == 0) { + printf("Fail to set rate to %dKHz", freq); + return; + } + + debug("best %d, pred = %d, postd = %d\n", best, pred, postd); + + pll_div = best / hck; + pll_denom = 1000000; + pll_num = (best - hck * pll_div) * pll_denom / hck; + + /* + * pll_num + * (24MHz * (pll_div + --------- )) + * pll_denom + *freq KHz = -------------------------------- + * post_div * pred * postd * 1000 + */ + + if (base_addr == LCDIF1_BASE_ADDR) { + if (enable_pll_video(pll_div, pll_num, pll_denom, post_div)) + return; + + /* Select pre-lcd clock to PLL5 and set pre divider */ + clrsetbits_le32(&imx_ccm->cscdr2, + MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_MASK | + MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK, + (0x2 << MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_OFFSET) | + ((pred - 1) << + MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET)); + + /* Set the post divider */ + clrsetbits_le32(&imx_ccm->cbcmr, + MXC_CCM_CBCMR_LCDIF1_PODF_MASK, + ((postd - 1) << + MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET)); + } else if (is_cpu_type(MXC_CPU_MX6SX)) { + /* Setting LCDIF2 for i.MX6SX */ + if (enable_pll_video(pll_div, pll_num, pll_denom, post_div)) + return; + + /* Select pre-lcd clock to PLL5 and set pre divider */ + clrsetbits_le32(&imx_ccm->cscdr2, + MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_MASK | + MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_MASK, + (0x2 << MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_OFFSET) | + ((pred - 1) << + MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_OFFSET)); + + /* Set the post divider */ + clrsetbits_le32(&imx_ccm->cscmr1, + MXC_CCM_CSCMR1_LCDIF2_PODF_MASK, + ((postd - 1) << + MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET)); + } +} + +int enable_lcdif_clock(u32 base_addr) +{ + u32 reg = 0; + u32 lcdif_clk_sel_mask, lcdif_ccgr3_mask; + + if (is_cpu_type(MXC_CPU_MX6SX)) { + if ((base_addr == LCDIF1_BASE_ADDR) || + (base_addr == LCDIF2_BASE_ADDR)) { + puts("Wrong LCD interface!\n"); + return -EINVAL; + } + /* Set to pre-mux clock at default */ + lcdif_clk_sel_mask = (base_addr == LCDIF2_BASE_ADDR) ? + MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK : + MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK; + lcdif_ccgr3_mask = (base_addr == LCDIF2_BASE_ADDR) ? + (MXC_CCM_CCGR3_LCDIF2_PIX_MASK | + MXC_CCM_CCGR3_DISP_AXI_MASK) : + (MXC_CCM_CCGR3_LCDIF1_PIX_MASK | + MXC_CCM_CCGR3_DISP_AXI_MASK); + } else if (is_cpu_type(MXC_CPU_MX6UL)) { + if (base_addr != LCDIF1_BASE_ADDR) { + puts("Wrong LCD interface!\n"); + return -EINVAL; + } + /* Set to pre-mux clock at default */ + lcdif_clk_sel_mask = MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK; + lcdif_ccgr3_mask = MXC_CCM_CCGR3_LCDIF1_PIX_MASK; + } else { + return 0; + } + + reg = readl(&imx_ccm->cscdr2); + reg &= ~lcdif_clk_sel_mask; + writel(reg, &imx_ccm->cscdr2); + + /* Enable the LCDIF pix clock */ + reg = readl(&imx_ccm->CCGR3); + reg |= lcdif_ccgr3_mask; + writel(reg, &imx_ccm->CCGR3); + + reg = readl(&imx_ccm->CCGR2); + reg |= MXC_CCM_CCGR2_LCD_MASK; + writel(reg, &imx_ccm->CCGR2); +} +#endif + #ifdef CONFIG_FSL_QSPI /* qspi_num can be from 0 - 1 */ void enable_qspi_clk(int qspi_num) diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 282302b..bf5ae8c 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -15,6 +15,7 @@ #include <asm/arch/sys_proto.h> #include <asm/imx-common/boot_mode.h> #include <asm/imx-common/dma.h> +#include <asm/imx-common/hab.h> #include <stdbool.h> #include <asm/arch/mxc_hdmi.h> #include <asm/arch/crm_regs.h> @@ -48,6 +49,13 @@ U_BOOT_DEVICE(imx6_thermal) = { }; #endif +#if defined(CONFIG_SECURE_BOOT) +struct imx_sec_config_fuse_t const imx_sec_config_fuse = { + .bank = 0, + .word = 6, +}; +#endif + u32 get_nr_cpus(void) { struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR; @@ -392,6 +400,13 @@ const struct boot_mode soc_boot_modes[] = { {NULL, 0}, }; +void reset_misc(void) +{ +#ifdef CONFIG_VIDEO_MXS + lcdif_power_down(); +#endif +} + void s_init(void) { struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; diff --git a/arch/arm/cpu/armv7/mx7/Kconfig b/arch/arm/cpu/armv7/mx7/Kconfig index ea19e5c..97d6238 100644 --- a/arch/arm/cpu/armv7/mx7/Kconfig +++ b/arch/arm/cpu/armv7/mx7/Kconfig @@ -2,9 +2,11 @@ if ARCH_MX7 config MX7 bool + select ROM_UNIFIED_SECTIONS default y config MX7D + select ROM_UNIFIED_SECTIONS bool choice diff --git a/arch/arm/cpu/armv7/mx7/Makefile b/arch/arm/cpu/armv7/mx7/Makefile index e6ecef0..d21f87f 100644 --- a/arch/arm/cpu/armv7/mx7/Makefile +++ b/arch/arm/cpu/armv7/mx7/Makefile @@ -6,3 +6,7 @@ # obj-y := soc.o clock.o clock_slice.o + +ifdef CONFIG_ARMV7_PSCI +obj-y += psci-mx7.o psci.o +endif diff --git a/arch/arm/cpu/armv7/mx7/psci-mx7.c b/arch/arm/cpu/armv7/mx7/psci-mx7.c new file mode 100644 index 0000000..9a33047 --- /dev/null +++ b/arch/arm/cpu/armv7/mx7/psci-mx7.c @@ -0,0 +1,69 @@ +#include <asm/io.h> +#include <asm/psci.h> +#include <asm/arch/imx-regs.h> +#include <common.h> + +#define __secure __attribute__((section("._secure.text"))) + +#define GPC_CPU_PGC_SW_PDN_REQ 0xfc +#define GPC_CPU_PGC_SW_PUP_REQ 0xf0 +#define GPC_PGC_C1 0x840 + +#define BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7 0x2 + +/* below is for i.MX7D */ +#define SRC_GPR1_MX7D 0x074 +#define SRC_A7RCR0 0x004 +#define SRC_A7RCR1 0x008 + +#define BP_SRC_A7RCR0_A7_CORE_RESET0 0 +#define BP_SRC_A7RCR1_A7_CORE1_ENABLE 1 + +static inline void imx_gpcv2_set_m_core_pgc(bool enable, u32 offset) +{ + writel(enable, GPC_IPS_BASE_ADDR + offset); +} + +__secure void imx_gpcv2_set_core1_power(bool pdn) +{ + u32 reg = pdn ? GPC_CPU_PGC_SW_PUP_REQ : GPC_CPU_PGC_SW_PDN_REQ; + u32 val; + + imx_gpcv2_set_m_core_pgc(true, GPC_PGC_C1); + + val = readl(GPC_IPS_BASE_ADDR + reg); + val |= BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7; + writel(val, GPC_IPS_BASE_ADDR + reg); + + while ((readl(GPC_IPS_BASE_ADDR + reg) & + BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7) != 0) + ; + + imx_gpcv2_set_m_core_pgc(false, GPC_PGC_C1); +} + +__secure void imx_enable_cpu_ca7(int cpu, bool enable) +{ + u32 mask, val; + + mask = 1 << (BP_SRC_A7RCR1_A7_CORE1_ENABLE + cpu - 1); + val = readl(SRC_BASE_ADDR + SRC_A7RCR1); + val = enable ? val | mask : val & ~mask; + writel(val, SRC_BASE_ADDR + SRC_A7RCR1); +} + +__secure int imx_cpu_on(int fn, int cpu, int pc) +{ + writel(pc, SRC_BASE_ADDR + cpu * 8 + SRC_GPR1_MX7D); + imx_gpcv2_set_core1_power(true); + imx_enable_cpu_ca7(cpu, true); + return 0; +} + +__secure int imx_cpu_off(int cpu) +{ + imx_enable_cpu_ca7(cpu, false); + imx_gpcv2_set_core1_power(false); + writel(0, SRC_BASE_ADDR + cpu * 8 + SRC_GPR1_MX7D + 4); + return 0; +} diff --git a/arch/arm/cpu/armv7/mx7/psci.S b/arch/arm/cpu/armv7/mx7/psci.S new file mode 100644 index 0000000..34c6ab3 --- /dev/null +++ b/arch/arm/cpu/armv7/mx7/psci.S @@ -0,0 +1,54 @@ +#include <config.h> +#include <linux/linkage.h> + +#include <asm/armv7.h> +#include <asm/arch-armv7/generictimer.h> +#include <asm/psci.h> + + .pushsection ._secure.text, "ax" + + .arch_extension sec + + @ r1 = target CPU + @ r2 = target PC + +.globl psci_arch_init +psci_arch_init: + mov r6, lr + + bl psci_get_cpu_id + bl psci_get_cpu_stack_top + mov sp, r0 + + bx r6 + + @ r1 = target CPU + @ r2 = target PC + +.globl psci_cpu_on +psci_cpu_on: + push {lr} + + mov r0, r1 + bl psci_get_cpu_stack_top + str r2, [r0] + dsb + + ldr r2, =psci_cpu_entry + bl imx_cpu_on + + pop {pc} + +.globl psci_cpu_off +psci_cpu_off: + + bl psci_cpu_off_common + bl psci_get_cpu_id + bl imx_cpu_off + +1: wfi + b 1b + + .globl psci_text_end +psci_text_end: + .popsection diff --git a/arch/arm/cpu/armv7/mx7/soc.c b/arch/arm/cpu/armv7/mx7/soc.c index 2ed05ea..c777922 100644 --- a/arch/arm/cpu/armv7/mx7/soc.c +++ b/arch/arm/cpu/armv7/mx7/soc.c @@ -11,6 +11,7 @@ #include <asm/arch/sys_proto.h> #include <asm/imx-common/boot_mode.h> #include <asm/imx-common/dma.h> +#include <asm/imx-common/hab.h> #include <asm/arch/crm_regs.h> #include <dm.h> #include <imx_thermal.h> @@ -28,6 +29,13 @@ U_BOOT_DEVICE(imx7_thermal) = { }; #endif +#if defined(CONFIG_SECURE_BOOT) +struct imx_sec_config_fuse_t const imx_sec_config_fuse = { + .bank = 1, + .word = 3, +}; +#endif + /* * OCOTP_TESTER3[9:8] (see Fusemap Description Table offset 0x440) * defines a 2-bit SPEED_GRADING @@ -114,10 +122,19 @@ u32 __weak get_board_rev(void) } #endif +/* enable all periherial can be accessed in nosec mode */ +static void init_csu(void) +{ + int i = 0; + for (i = 0; i < CSU_NUM_REGS; i++) + writel(CSU_INIT_SEC_LEVEL0, CSU_IPS_BASE_ADDR + i * 4); +} + int arch_cpu_init(void) { init_aips(); + init_csu(); /* Disable PDE bit of WMCR register */ imx_set_wdog_powerdown(false); diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds index 03cd9f6..d48a905 100644 --- a/arch/arm/cpu/u-boot.lds +++ b/arch/arm/cpu/u-boot.lds @@ -14,6 +14,23 @@ OUTPUT_ARCH(arm) ENTRY(_start) SECTIONS { + /* + * Discard the relocation entries for secure text. + * The secure code is bundled with u-boot image, so there will + * be relocations entries for the secure code, since we use + * "-mword-relocations" to compile and "-pie" to link into the + * final image. We do not need the relocation entries for secure + * code, because secure code will not be relocated, it only needs + * to be copied from loading address to CONFIG_ARMV7_SECURE_BASE, + * which is the linking and running address for secure code. + * If keep the relocation entries in .rel.dyn section, + * "relocation offset + linking address" may locates into an + * address that is reserved by SoC, then will trigger data abort. + * + * The reason that move .rel._secure at the beginning, is to + * avoid hole in the final image. + */ + /DISCARD/ : { *(.rel._secure*) } . = 0x00000000; . = ALIGN(4); diff --git a/arch/arm/imx-common/Kconfig b/arch/arm/imx-common/Kconfig index 37b3752..229623922 100644 --- a/arch/arm/imx-common/Kconfig +++ b/arch/arm/imx-common/Kconfig @@ -1,2 +1,5 @@ config IMX_CONFIG string + +config ROM_UNIFIED_SECTIONS + bool diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile index 1698d06..e7190c3 100644 --- a/arch/arm/imx-common/Makefile +++ b/arch/arm/imx-common/Makefile @@ -14,7 +14,7 @@ ifeq ($(SOC),$(filter $(SOC),mx5 mx6)) obj-y += timer.o cpu.o speed.o obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o endif -ifeq ($(SOC),$(filter $(SOC),mx6 mxs)) +ifeq ($(SOC),$(filter $(SOC),mx7 mx6 mxs)) obj-y += misc.o obj-$(CONFIG_SPL_BUILD) += spl.o endif @@ -27,6 +27,7 @@ ifeq ($(SOC),$(filter $(SOC),mx6 mx7)) obj-y += cache.o init.o obj-$(CONFIG_CMD_SATA) += sata.o obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o +obj-$(CONFIG_SECURE_BOOT) += hab.o endif ifeq ($(SOC),$(filter $(SOC),vf610)) obj-y += ddrmc-vf610.o diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index d3d1fc5..656bb60 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -279,6 +279,9 @@ void arch_preboot_os(void) /* disable video before launching O/S */ ipuv3_fb_shutdown(); #endif +#if defined(CONFIG_VIDEO_MXS) + lcdif_power_down(); +#endif } void set_chipselect_size(int const cs_size) diff --git a/arch/arm/cpu/armv7/mx6/hab.c b/arch/arm/imx-common/hab.c index 27cabe4..8bbcc22 100644 --- a/arch/arm/cpu/armv7/mx6/hab.c +++ b/arch/arm/imx-common/hab.c @@ -5,11 +5,13 @@ */ #include <common.h> +#include <config.h> +#include <fuse.h> #include <asm/io.h> #include <asm/system.h> -#include <asm/arch/hab.h> #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> +#include <asm/imx-common/hab.h> /* -------- start of HAB API updates ------------*/ @@ -79,6 +81,8 @@ #define MX6DQ_PU_IROM_MMU_EN_VAR 0x009024a8 #define MX6DLS_PU_IROM_MMU_EN_VAR 0x00901dd0 #define MX6SL_PU_IROM_MMU_EN_VAR 0x00900a18 +#define IS_HAB_ENABLED_BIT \ + (is_soc_type(MXC_SOC_MX7) ? 0x2000000 : 0x2) /* * +------------+ 0x0 (DDR_UIMAGE_START) - @@ -260,13 +264,18 @@ uint8_t hab_engines[16] = { bool is_hab_enabled(void) { - struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; - struct fuse_bank *bank = &ocotp->bank[0]; - struct fuse_bank0_regs *fuse = - (struct fuse_bank0_regs *)bank->fuse_regs; - uint32_t reg = readl(&fuse->cfg5); + struct imx_sec_config_fuse_t *fuse = + (struct imx_sec_config_fuse_t *)&imx_sec_config_fuse; + uint32_t reg; + int ret; + + ret = fuse_read(fuse->bank, fuse->word, ®); + if (ret) { + puts("\nSecure boot fuse read error\n"); + return ret; + } - return (reg & 0x2) == 0x2; + return (reg & IS_HAB_ENABLED_BIT) == IS_HAB_ENABLED_BIT; } static inline uint8_t get_idx(uint8_t *list, uint8_t tgt) @@ -414,7 +423,7 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size) * crash. */ /* Check MMU enabled */ - if (get_cr() & CR_M) { + if (is_soc_type(MXC_SOC_MX6) && get_cr() & CR_M) { if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) { /* diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c index 1a88ce6..92c7218 100644 --- a/arch/arm/imx-common/timer.c +++ b/arch/arm/imx-common/timer.c @@ -66,25 +66,6 @@ static inline ulong gpt_get_clk(void) return MXC_CLK32; #endif } -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - ulong gpt_clk = gpt_get_clk(); - - tick *= CONFIG_SYS_HZ; - do_div(tick, gpt_clk); - - return tick; -} - -static inline unsigned long long us_to_tick(unsigned long long usec) -{ - ulong gpt_clk = gpt_get_clk(); - - usec = usec * gpt_clk + 999999; - do_div(usec, 1000000); - - return usec; -} int timer_init(void) { @@ -130,44 +111,9 @@ int timer_init(void) return 0; } -unsigned long long get_ticks(void) +unsigned long timer_read_counter(void) { - ulong now = __raw_readl(&cur_gpt->counter); /* current tick value */ - - /* increment tbu if tbl has rolled over */ - if (now < gd->arch.tbl) - gd->arch.tbu++; - gd->arch.tbl = now; - return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; -} - -ulong get_timer_masked(void) -{ - /* - * get_ticks() returns a long long (64 bit), it wraps in - * 2^64 / GPT_CLK = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~ - * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in - * 5 * 10^6 days - long enough. - */ - return tick_to_time(get_ticks()); -} - -ulong get_timer(ulong base) -{ - return get_timer_masked() - base; -} - -/* delay x useconds AND preserve advance timstamp value */ -void __udelay(unsigned long usec) -{ - unsigned long long tmp; - ulong tmo; - - tmo = us_to_tick(usec); - tmp = get_ticks() + tmo; /* get current timestamp */ - - while (get_ticks() < tmp) /* loop till event */ - /*NOP*/; + return __raw_readl(&cur_gpt->counter); /* current tick value */ } /* @@ -178,20 +124,3 @@ ulong get_tbclk(void) { return gpt_get_clk(); } - -/* - * This function is intended for SHORT delays only. - * It will overflow at around 10 seconds @ 400MHz, - * or 20 seconds @ 200MHz. - */ -unsigned long usec2ticks(unsigned long usec) -{ - ulong ticks; - - if (usec < 1000) - ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000; - else - ticks = ((usec / 10) * (get_tbclk() / 100000)); - - return ticks; -} diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h index 7e681e9..8a75902 100644 --- a/arch/arm/include/asm/arch-imx/cpu.h +++ b/arch/arm/include/asm/arch-imx/cpu.h @@ -27,6 +27,18 @@ #define MXC_SOC_MX6 0x60 #define MXC_SOC_MX7 0x70 +#define CHIP_REV_1_0 0x10 +#define CHIP_REV_1_1 0x11 +#define CHIP_REV_1_2 0x12 +#define CHIP_REV_1_5 0x15 +#define CHIP_REV_2_0 0x20 +#define CHIP_REV_2_5 0x25 +#define CHIP_REV_3_0 0x30 + +#define BOARD_REV_1_0 0x0 +#define BOARD_REV_2_0 0x1 +#define BOARD_VER_OFFSET 0x8 + #define CS0_128 0 #define CS0_64M_CS1_64M 1 #define CS0_64M_CS1_32M_CS2_32M 2 diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h index 78c4e9b..1b00ed7 100644 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h @@ -526,8 +526,4 @@ struct cspi_regs { IMX_CSPI2_BASE, \ IMX_CSPI3_BASE -#define CHIP_REV_1_0 0x10 -#define CHIP_REV_1_1 0x11 -#define CHIP_REV_1_2 0x12 - #endif /* _IMX_REGS_H */ diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index 5f0e1e6..e73cc07 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -291,17 +291,6 @@ #define DP_MFD_216 (4 - 1) #define DP_MFN_216 3 -#define CHIP_REV_1_0 0x10 -#define CHIP_REV_1_1 0x11 -#define CHIP_REV_2_0 0x20 -#define CHIP_REV_2_5 0x25 -#define CHIP_REV_3_0 0x30 - -#define BOARD_REV_1_0 0x0 -#define BOARD_REV_2_0 0x1 - -#define BOARD_VER_OFFSET 0x8 - #define IMX_IIM_BASE (IIM_BASE_ADDR) #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index 2b220d6..1450523 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -66,6 +66,8 @@ int enable_spi_clk(unsigned char enable, unsigned spi_num); void enable_ipu_clock(void); int enable_fec_anatop_clock(int fec_id, enum enet_freq freq); void enable_enet_clk(unsigned char enable); +int enable_lcdif_clock(u32 base_addr); void enable_qspi_clk(int qspi_num); void enable_thermal_clk(void); +void mxs_set_lcdclk(u32 base_addr, u32 freq); #endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index 10306cd..13e0a3d 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -174,6 +174,9 @@ struct mxc_ccm_reg { #define MXC_CCM_CBCMR_GPU3D_SHADER_PODF_OFFSET 29 #define MXC_CCM_CBCMR_GPU3D_CORE_PODF_MASK (0x7 << 26) #define MXC_CCM_CBCMR_GPU3D_CORE_PODF_OFFSET 26 +/* LCDIF on i.MX6SX/UL */ +#define MXC_CCM_CBCMR_LCDIF1_PODF_MASK (0x7 << 23) +#define MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET 23 #define MXC_CCM_CBCMR_GPU2D_CORE_PODF_MASK (0x7 << 23) #define MXC_CCM_CBCMR_GPU2D_CORE_PODF_OFFSET 23 #define MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK (0x3 << 21) @@ -210,7 +213,10 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCMR1_ACLK_EMI_OFFSET 27 #define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK (0x7 << 23) #define MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET 23 -/* ACLK_EMI_PODF is LCFIF2_PODF on MX6SX */ +/* LCFIF2_PODF on i.MX6SX */ +#define MXC_CCM_CSCMR1_LCDIF2_PODF_MASK (0x7 << 20) +#define MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET 20 +/* ACLK_EMI on i.MX6DQ/SDL/DQP */ #define MXC_CCM_CSCMR1_ACLK_EMI_PODF_MASK (0x7 << 20) #define MXC_CCM_CSCMR1_ACLK_EMI_PODF_OFFSET 20 /* CSCMR1_GPMI/BCH exist on i.MX6UL */ @@ -400,6 +406,20 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET 19 /* ECSPI_CLK_SEL exists on i.MX6SX/SL/QP */ #define MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK (0x1 << 18) +/* LCDIF1 on i.MX6SX/UL */ +#define MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_MASK (0x7 << 15) +#define MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_OFFSET 15 +#define MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK (0x7 << 12) +#define MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET 12 +#define MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK (0x7 << 9) +#define MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_OFFSET 9 +/* LCDIF2 on i.MX6SX */ +#define MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_MASK (0x7 << 6) +#define MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_OFFSET 6 +#define MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_MASK (0x7 << 3) +#define MXC_CCM_CSCDR2_LCDIF2_PRE_DIV_OFFSET 3 +#define MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK (0x7 << 0) +#define MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_OFFSET 0 /* All IPU2_DI1 are LCDIF1 on MX6SX */ #define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_MASK (0x7 << 15) @@ -622,17 +642,16 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR2_IPMUX3_MASK (3 << MXC_CCM_CCGR2_IPMUX3_OFFSET) #define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_OFFSET 22 #define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_MASK (3 << MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_OFFSET) -#ifdef CONFIG_MX6SX +/* i.MX6SX/UL LCD and PXP */ #define MXC_CCM_CCGR2_LCD_OFFSET 28 #define MXC_CCM_CCGR2_LCD_MASK (3 << MXC_CCM_CCGR2_LCD_OFFSET) #define MXC_CCM_CCGR2_PXP_OFFSET 30 #define MXC_CCM_CCGR2_PXP_MASK (3 << MXC_CCM_CCGR2_PXP_OFFSET) -#else + #define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_OFFSET 24 #define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_MASK (3 << MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_OFFSET) #define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET 26 #define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_MASK (3 << MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET) -#endif /* Exist on i.MX6SX */ #define MXC_CCM_CCGR3_M4_OFFSET 2 @@ -685,6 +704,13 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_OFFSET) #define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET 26 #define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET) + +#define MXC_CCM_CCGR3_DISP_AXI_OFFSET 6 +#define MXC_CCM_CCGR3_DISP_AXI_MASK (3 << MXC_CCM_CCGR3_DISP_AXI_OFFSET) +#define MXC_CCM_CCGR3_LCDIF2_PIX_OFFSET 8 +#define MXC_CCM_CCGR3_LCDIF2_PIX_MASK (3 << MXC_CCM_CCGR3_LCDIF2_PIX_OFFSET) +#define MXC_CCM_CCGR3_LCDIF1_PIX_OFFSET 10 +#define MXC_CCM_CCGR3_LCDIF1_PIX_MASK (3 << MXC_CCM_CCGR3_LCDIF1_PIX_OFFSET) /* AXI on i.MX6UL */ #define MXC_CCM_CCGR3_AXI_CLK_OFFSET 28 #define MXC_CCM_CCGR3_AXI_CLK_MASK (3 << MXC_CCM_CCGR3_AXI_CLK_OFFSET) diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 74512ac..2f068e5 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -264,6 +264,7 @@ #define CSU_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x40000) #define IP2APB_PERFMON1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x44000) #define IP2APB_PERFMON2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) +#define MX6UL_LCDIF1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x48000) #ifdef CONFIG_MX6SX #define DEBUG_MONITOR_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4C000) #else @@ -300,8 +301,6 @@ #define CSI1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x14000) #define PXP_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x18000) #define CSI2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x1C000) -#define LCDIF1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x20000) -#define LCDIF2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x24000) #define VADC_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x28000) #define VDEC_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x2C000) #define SPBA_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x3C000) @@ -319,16 +318,11 @@ #define PWM7_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xAC000) #define PWM8_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xB0000) #endif +/* Only for i.MX6SX */ +#define LCDIF2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x24000) +#define MX6SX_LCDIF1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x20000) #define MX6SX_WDOG3_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x88000) -/* only for i.MX6SX/UL */ -#define WDOG3_BASE_ADDR (is_cpu_type(MXC_CPU_MX6UL) ? \ - MX6UL_WDOG3_BASE_ADDR : MX6SX_WDOG3_BASE_ADDR) - -#define CHIP_REV_1_0 0x10 -#define CHIP_REV_1_2 0x12 -#define CHIP_REV_1_5 0x15 -#define CHIP_REV_2_0 0x20 #if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL)) #define IRAM_SIZE 0x00040000 #else @@ -336,9 +330,17 @@ #endif #define FEC_QUIRK_ENET_MAC +#include <asm/imx-common/regs-lcdif.h> #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) #include <asm/types.h> +/* only for i.MX6SX/UL */ +#define WDOG3_BASE_ADDR (is_cpu_type(MXC_CPU_MX6UL) ? \ + MX6UL_WDOG3_BASE_ADDR : MX6SX_WDOG3_BASE_ADDR) +#define LCDIF1_BASE_ADDR (is_cpu_type(MXC_CPU_MX6UL)) ? \ + MX6UL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR + + extern void imx_get_mac_from_fuse(int dev_id, unsigned char *mac); #define SRC_SCR_CORE_1_RESET_OFFSET 14 @@ -413,10 +415,37 @@ struct src { }; /* GPR1 bitfields */ +#define IOMUXC_GPR1_APP_CLK_REQ_N BIT(30) +#define IOMUXC_GPR1_PCIE_EXIT_L1 BIT(28) +#define IOMUXC_GPR1_PCIE_RDY_L23 BIT(27) +#define IOMUXC_GPR1_PCIE_ENTER_L1 BIT(26) +#define IOMUXC_GPR1_MIPI_COLOR_SW BIT(25) +#define IOMUXC_GPR1_DPI_OFF BIT(24) +#define IOMUXC_GPR1_EXC_MON_SLVE BIT(22) #define IOMUXC_GPR1_ENET_CLK_SEL_OFFSET 21 #define IOMUXC_GPR1_ENET_CLK_SEL_MASK (1 << IOMUXC_GPR1_ENET_CLK_SEL_OFFSET) +#define IOMUXC_GPR1_MIPI_IPU2_MUX_IOMUX BIT(20) +#define IOMUXC_GPR1_MIPI_IPU1_MUX_IOMUX BIT(19) +#define IOMUXC_GPR1_PCIE_TEST_PD BIT(18) +#define IOMUXC_GPR1_IPU_VPU_MUX_IPU2 BIT(17) +#define IOMUXC_GPR1_PCIE_REF_CLK_EN BIT(16) +#define IOMUXC_GPR1_USB_EXP_MODE BIT(15) +#define IOMUXC_GPR1_PCIE_INT BIT(14) #define IOMUXC_GPR1_USB_OTG_ID_OFFSET 13 #define IOMUXC_GPR1_USB_OTG_ID_SEL_MASK (1 << IOMUXC_GPR1_USB_OTG_ID_OFFSET) +#define IOMUXC_GPR1_GINT BIT(12) +#define IOMUXC_GPR1_ADDRS3_MASK (0x3 << 10) +#define IOMUXC_GPR1_ADDRS3_32MB (0x0 << 10) +#define IOMUXC_GPR1_ADDRS3_64MB (0x1 << 10) +#define IOMUXC_GPR1_ADDRS3_128MB (0x2 << 10) +#define IOMUXC_GPR1_ACT_CS3 BIT(9) +#define IOMUXC_GPR1_ADDRS2_MASK (0x3 << 7) +#define IOMUXC_GPR1_ACT_CS2 BIT(6) +#define IOMUXC_GPR1_ADDRS1_MASK (0x3 << 4) +#define IOMUXC_GPR1_ACT_CS1 BIT(3) +#define IOMUXC_GPR1_ADDRS0_OFFSET (1) +#define IOMUXC_GPR1_ADDRS0_MASK (0x3 << 1) +#define IOMUXC_GPR1_ACT_CS0 BIT(0) /* GPR3 bitfields */ #define IOMUXC_GPR3_GPU_DBG_OFFSET 29 @@ -465,6 +494,14 @@ struct src { #define IOMUXC_GPR3_HDMI_MUX_CTL_OFFSET 2 #define IOMUXC_GPR3_HDMI_MUX_CTL_MASK (3<<IOMUXC_GPR3_HDMI_MUX_CTL_OFFSET) +/* gpr12 bitfields */ +#define IOMUXC_GPR12_ARMP_IPG_CLK_EN BIT(27) +#define IOMUXC_GPR12_ARMP_AHB_CLK_EN BIT(26) +#define IOMUXC_GPR12_ARMP_ATB_CLK_EN BIT(25) +#define IOMUXC_GPR12_ARMP_APB_CLK_EN BIT(24) +#define IOMUXC_GPR12_DEVICE_TYPE (0xf << 12) +#define IOMUXC_GPR12_PCIE_CTL_2 BIT(10) +#define IOMUXC_GPR12_LOS_LEVEL (0x1f << 4) struct iomuxc { #if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL)) diff --git a/arch/arm/include/asm/arch-mx7/imx-regs.h b/arch/arm/include/asm/arch-mx7/imx-regs.h index 4dc11ee..e28a807 100644 --- a/arch/arm/include/asm/arch-mx7/imx-regs.h +++ b/arch/arm/include/asm/arch-mx7/imx-regs.h @@ -217,6 +217,7 @@ #define SNVS_LPGPR 0x68 #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) +#include <asm/imx-common/regs-lcdif.h> #include <asm/types.h> extern void imx_get_mac_from_fuse(int dev_id, unsigned char *mac); @@ -866,6 +867,9 @@ struct cspi_regs { ECSPI3_BASE_ADDR, \ ECSPI4_BASE_ADDR +#define CSU_INIT_SEC_LEVEL0 0x00FF00FF +#define CSU_NUM_REGS 64 + struct ocotp_regs { u32 ctrl; u32 ctrl_set; @@ -1029,101 +1033,6 @@ struct rdc_sema_regs { u16 rstgt; /* Reset Gate */ }; -/* eLCDIF controller registers */ -struct mxs_lcdif_regs { - u32 hw_lcdif_ctrl; /* 0x00 */ - u32 hw_lcdif_ctrl_set; - u32 hw_lcdif_ctrl_clr; - u32 hw_lcdif_ctrl_tog; - u32 hw_lcdif_ctrl1; /* 0x10 */ - u32 hw_lcdif_ctrl1_set; - u32 hw_lcdif_ctrl1_clr; - u32 hw_lcdif_ctrl1_tog; - u32 hw_lcdif_ctrl2; /* 0x20 */ - u32 hw_lcdif_ctrl2_set; - u32 hw_lcdif_ctrl2_clr; - u32 hw_lcdif_ctrl2_tog; - u32 hw_lcdif_transfer_count; /* 0x30 */ - u32 reserved1[3]; - u32 hw_lcdif_cur_buf; /* 0x40 */ - u32 reserved2[3]; - u32 hw_lcdif_next_buf; /* 0x50 */ - u32 reserved3[3]; - u32 hw_lcdif_timing; /* 0x60 */ - u32 reserved4[3]; - u32 hw_lcdif_vdctrl0; /* 0x70 */ - u32 hw_lcdif_vdctrl0_set; - u32 hw_lcdif_vdctrl0_clr; - u32 hw_lcdif_vdctrl0_tog; - u32 hw_lcdif_vdctrl1; /* 0x80 */ - u32 reserved5[3]; - u32 hw_lcdif_vdctrl2; /* 0x90 */ - u32 reserved6[3]; - u32 hw_lcdif_vdctrl3; /* 0xa0 */ - u32 reserved7[3]; - u32 hw_lcdif_vdctrl4; /* 0xb0 */ - u32 reserved8[3]; - u32 hw_lcdif_dvictrl0; /* 0xc0 */ - u32 reserved9[3]; - u32 hw_lcdif_dvictrl1; /* 0xd0 */ - u32 reserved10[3]; - u32 hw_lcdif_dvictrl2; /* 0xe0 */ - u32 reserved11[3]; - u32 hw_lcdif_dvictrl3; /* 0xf0 */ - u32 reserved12[3]; - u32 hw_lcdif_dvictrl4; /* 0x100 */ - u32 reserved13[3]; - u32 hw_lcdif_csc_coeffctrl0; /* 0x110 */ - u32 reserved14[3]; - u32 hw_lcdif_csc_coeffctrl1; /* 0x120 */ - u32 reserved15[3]; - u32 hw_lcdif_csc_coeffctrl2; /* 0x130 */ - u32 reserved16[3]; - u32 hw_lcdif_csc_coeffctrl3; /* 0x140 */ - u32 reserved17[3]; - u32 hw_lcdif_csc_coeffctrl4; /* 0x150 */ - u32 reserved18[3]; - u32 hw_lcdif_csc_offset; /* 0x160 */ - u32 reserved19[3]; - u32 hw_lcdif_csc_limit; /* 0x170 */ - u32 reserved20[3]; - u32 hw_lcdif_data; /* 0x180 */ - u32 reserved21[3]; - u32 hw_lcdif_bm_error_stat; /* 0x190 */ - u32 reserved22[3]; - u32 hw_lcdif_crc_stat; /* 0x1a0 */ - u32 reserved23[3]; - u32 hw_lcdif_lcdif_stat; /* 0x1b0 */ - u32 reserved24[3]; - u32 hw_lcdif_version; /* 0x1c0 */ - u32 reserved25[3]; - u32 hw_lcdif_debug0; /* 0x1d0 */ - u32 reserved26[3]; - u32 hw_lcdif_debug1; /* 0x1e0 */ - u32 reserved27[3]; - u32 hw_lcdif_debug2; /* 0x1f0 */ - u32 reserved28[3]; - u32 hw_lcdif_thres; /* 0x200 */ - u32 reserved29[3]; - u32 hw_lcdif_as_ctrl; /* 0x210 */ - u32 reserved30[3]; - u32 hw_lcdif_as_buf; /* 0x220 */ - u32 reserved31[3]; - u32 hw_lcdif_as_next_buf; /* 0x230 */ - u32 reserved32[3]; - u32 hw_lcdif_as_clrkeylow; /* 0x240 */ - u32 reserved33[3]; - u32 hw_lcdif_as_clrkeyhigh; /* 0x250 */ - u32 reserved34[3]; - u32 hw_lcdif_as_sync_delay; /* 0x260 */ - u32 reserved35[3]; - u32 hw_lcdif_as_debug3; /* 0x270 */ - u32 reserved36[3]; - u32 hw_lcdif_as_debug4; /* 0x280 */ - u32 reserved37[3]; - u32 hw_lcdif_as_debug5; /* 0x290 */ -}; - #define MXS_LCDIF_BASE ELCDIF1_IPS_BASE_ADDR #define LCDIF_CTRL_SFTRST (1 << 31) diff --git a/arch/arm/include/asm/arch-mxs/clock.h b/arch/arm/include/asm/arch-mxs/clock.h index fc9d75b..fdc5395 100644 --- a/arch/arm/include/asm/arch-mxs/clock.h +++ b/arch/arm/include/asm/arch-mxs/clock.h @@ -46,7 +46,7 @@ uint32_t mxc_get_clock(enum mxc_clock clk); void mxs_set_ioclk(enum mxs_ioclock io, uint32_t freq); void mxs_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal); void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq); -void mxs_set_lcdclk(uint32_t freq); +void mxs_set_lcdclk(uint32_t __maybe_unused lcd_base, uint32_t freq); /* Compatibility with the FEC Ethernet driver */ #define imx_get_fecclk() mxc_get_clock(MXC_AHB_CLK) diff --git a/arch/arm/include/asm/arch-mxs/imx-regs.h b/arch/arm/include/asm/arch-mxs/imx-regs.h index 86914ef..8872438 100644 --- a/arch/arm/include/asm/arch-mxs/imx-regs.h +++ b/arch/arm/include/asm/arch-mxs/imx-regs.h @@ -15,8 +15,8 @@ #include <asm/imx-common/regs-bch.h> #include <asm/arch/regs-digctl.h> #include <asm/imx-common/regs-gpmi.h> +#include <asm/imx-common/regs-lcdif.h> #include <asm/arch/regs-i2c.h> -#include <asm/arch/regs-lcdif.h> #include <asm/arch/regs-lradc.h> #include <asm/arch/regs-ocotp.h> #include <asm/arch/regs-pinctrl.h> diff --git a/arch/arm/include/asm/arch-mx6/hab.h b/arch/arm/include/asm/imx-common/hab.h index d0eaa67..dab6789 100644 --- a/arch/arm/include/asm/arch-mx6/hab.h +++ b/arch/arm/include/asm/imx-common/hab.h @@ -85,6 +85,15 @@ enum hab_context { HAB_CTX_MAX }; +struct imx_sec_config_fuse_t { + int bank; + int word; +}; + +#if defined(CONFIG_SECURE_BOOT) +extern struct imx_sec_config_fuse_t const imx_sec_config_fuse; +#endif + /*Function prototype description*/ typedef enum hab_status hab_rvt_report_event_t(enum hab_status, uint32_t, uint8_t* , size_t*); @@ -113,7 +122,7 @@ typedef void hapi_clock_init_t(void); #define HAB_ENG_RTL 0x77 /* RTL simulation engine */ #define HAB_ENG_SW 0xff /* Software engine */ -#ifdef CONFIG_MX6SX +#ifdef CONFIG_ROM_UNIFIED_SECTIONS #define HAB_RVT_BASE 0x00000100 #else #define HAB_RVT_BASE 0x00000094 diff --git a/arch/arm/include/asm/imx-common/regs-common.h b/arch/arm/include/asm/imx-common/regs-common.h index e54a220..7382674 100644 --- a/arch/arm/include/asm/imx-common/regs-common.h +++ b/arch/arm/include/asm/imx-common/regs-common.h @@ -10,6 +10,8 @@ #ifndef __MXS_REGS_COMMON_H__ #define __MXS_REGS_COMMON_H__ +#include <linux/types.h> + /* * The i.MXS has interesting feature when it comes to register access. There * are four kinds of access to one particular register. Those are: diff --git a/arch/arm/include/asm/arch-mxs/regs-lcdif.h b/arch/arm/include/asm/imx-common/regs-lcdif.h index 8915d84..5a4f61f 100644 --- a/arch/arm/include/asm/arch-mxs/regs-lcdif.h +++ b/arch/arm/include/asm/imx-common/regs-lcdif.h @@ -1,5 +1,5 @@ /* - * Freescale i.MX28 LCDIF Register Definitions + * Freescale i.MX28/6SX/6UL/7D LCDIF Register Definitions * * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> * on behalf of DENX Software Engineering GmbH @@ -10,16 +10,17 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __MX28_REGS_LCDIF_H__ -#define __MX28_REGS_LCDIF_H__ +#ifndef __IMX_REGS_LCDIF_H__ +#define __IMX_REGS_LCDIF_H__ +#ifndef __ASSEMBLY__ #include <asm/imx-common/regs-common.h> -#ifndef __ASSEMBLY__ struct mxs_lcdif_regs { mxs_reg_32(hw_lcdif_ctrl) /* 0x00 */ mxs_reg_32(hw_lcdif_ctrl1) /* 0x10 */ -#if defined(CONFIG_MX28) +#if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \ + defined(CONFIG_MX7) mxs_reg_32(hw_lcdif_ctrl2) /* 0x20 */ #endif mxs_reg_32(hw_lcdif_transfer_count) /* 0x20/0x30 */ @@ -54,7 +55,8 @@ struct mxs_lcdif_regs { #endif mxs_reg_32(hw_lcdif_data) /* 0x1b0/0x180 */ mxs_reg_32(hw_lcdif_bm_error_stat) /* 0x1c0/0x190 */ -#if defined(CONFIG_MX28) +#if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \ + defined(CONFIG_MX7) mxs_reg_32(hw_lcdif_crc_stat) /* 0x1a0 */ #endif mxs_reg_32(hw_lcdif_lcdif_stat) /* 0x1d0/0x1b0 */ @@ -62,6 +64,18 @@ struct mxs_lcdif_regs { mxs_reg_32(hw_lcdif_debug0) /* 0x1f0/0x1d0 */ mxs_reg_32(hw_lcdif_debug1) /* 0x200/0x1e0 */ mxs_reg_32(hw_lcdif_debug2) /* 0x1f0 */ +#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || defined(CONFIG_MX7) + mxs_reg_32(hw_lcdif_thres) + mxs_reg_32(hw_lcdif_as_ctrl) + mxs_reg_32(hw_lcdif_as_buf) + mxs_reg_32(hw_lcdif_as_next_buf) + mxs_reg_32(hw_lcdif_as_clrkeylow) + mxs_reg_32(hw_lcdif_as_clrkeyhigh) + mxs_reg_32(hw_lcdif_as_sync_delay) + mxs_reg_32(hw_lcdif_as_debug3) + mxs_reg_32(hw_lcdif_as_debug4) + mxs_reg_32(hw_lcdif_as_debug5) +#endif }; #endif @@ -194,7 +208,7 @@ struct mxs_lcdif_regs { #if defined(CONFIG_MX23) #define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK (0xff << 24) #define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET 24 -#elif defined(CONFIG_MX28) +#else #define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK (0x3fff << 18) #define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET 18 #endif @@ -214,4 +228,4 @@ struct mxs_lcdif_regs { #define LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT_MASK 0x3ffff #define LCDIF_VDCTRL4_DOTCLK_H_VALID_DATA_CNT_OFFSET 0 -#endif /* __MX28_REGS_LCDIF_H__ */ +#endif /* __IMX_REGS_LCDIF_H__ */ diff --git a/arch/arm/include/asm/imx-common/sys_proto.h b/arch/arm/include/asm/imx-common/sys_proto.h index 5673fb4..386c2dc 100644 --- a/arch/arm/include/asm/imx-common/sys_proto.h +++ b/arch/arm/include/asm/imx-common/sys_proto.h @@ -47,6 +47,8 @@ int fecmxc_initialize(bd_t *bis); u32 get_ahb_clk(void); u32 get_periph_clk(void); +void lcdif_power_down(void); + int mxs_reset_block(struct mxs_register_32 *reg); int mxs_wait_mask_set(struct mxs_register_32 *reg, u32 mask, u32 timeout); int mxs_wait_mask_clr(struct mxs_register_32 *reg, u32 mask, u32 timeout); |