diff options
Diffstat (limited to 'arch/arm')
51 files changed, 442 insertions, 900 deletions
diff --git a/arch/arm/config.mk b/arch/arm/config.mk index ce3903b..d0cf43f 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -16,7 +16,8 @@ endif endif LDFLAGS_FINAL += --gc-sections -PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections +PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections \ + -fno-common -ffixed-r9 -msoft-float # Support generic board on ARM __HAVE_ARCH_GENERIC_BOARD := y @@ -94,7 +95,11 @@ PLATFORM_RELFLAGS += -fno-optimize-sibling-calls endif endif -# check that only R_ARM_RELATIVE relocations are generated ifneq ($(CONFIG_SPL_BUILD),y) -ALL-y += checkarmreloc +# Check that only R_ARM_RELATIVE relocations are generated. +ALL-y += checkarmreloc +# The movt / movw can hardcode 16 bit parts of the addresses in the +# instruction. Relocation is not supported for that case, so disable +# such usage by requiring word relocations. +PLATFORM_CPPFLAGS += $(call cc-option, -mword-relocations) endif diff --git a/arch/arm/cpu/arm1136/config.mk b/arch/arm/cpu/arm1136/config.mk index 1ef6061..b4d396d 100644 --- a/arch/arm/cpu/arm1136/config.mk +++ b/arch/arm/cpu/arm1136/config.mk @@ -4,7 +4,6 @@ # # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float # Make ARMv5 to allow more compilers to work, even though its v6. PLATFORM_CPPFLAGS += -march=armv5 diff --git a/arch/arm/cpu/arm1176/config.mk b/arch/arm/cpu/arm1176/config.mk index 917da03..f4631cb 100644 --- a/arch/arm/cpu/arm1176/config.mk +++ b/arch/arm/cpu/arm1176/config.mk @@ -4,7 +4,6 @@ # # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float # Make ARMv5 to allow more compilers to work, even though its v6. PLATFORM_CPPFLAGS += -march=armv5t diff --git a/arch/arm/cpu/arm720t/config.mk b/arch/arm/cpu/arm720t/config.mk index 56b6280..2581f0a 100644 --- a/arch/arm/cpu/arm720t/config.mk +++ b/arch/arm/cpu/arm720t/config.mk @@ -6,8 +6,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float - PLATFORM_CPPFLAGS += -march=armv4 -mtune=arm7tdmi # ========================================================================= # diff --git a/arch/arm/cpu/arm920t/config.mk b/arch/arm/cpu/arm920t/config.mk index 58fd756..67537dc 100644 --- a/arch/arm/cpu/arm920t/config.mk +++ b/arch/arm/cpu/arm920t/config.mk @@ -5,8 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float - PLATFORM_CPPFLAGS += -march=armv4 # ========================================================================= # diff --git a/arch/arm/cpu/arm925t/config.mk b/arch/arm/cpu/arm925t/config.mk index 58fd756..67537dc 100644 --- a/arch/arm/cpu/arm925t/config.mk +++ b/arch/arm/cpu/arm925t/config.mk @@ -5,8 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float - PLATFORM_CPPFLAGS += -march=armv4 # ========================================================================= # diff --git a/arch/arm/cpu/arm926ejs/config.mk b/arch/arm/cpu/arm926ejs/config.mk index 917ff7e..12b0d09 100644 --- a/arch/arm/cpu/arm926ejs/config.mk +++ b/arch/arm/cpu/arm926ejs/config.mk @@ -5,8 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float - PLATFORM_CPPFLAGS += -march=armv5te # ========================================================================= # diff --git a/arch/arm/cpu/arm926ejs/mx27/asm-offsets.c b/arch/arm/cpu/arm926ejs/mx27/asm-offsets.c index 8db2a67..629b727 100644 --- a/arch/arm/cpu/arm926ejs/mx27/asm-offsets.c +++ b/arch/arm/cpu/arm926ejs/mx27/asm-offsets.c @@ -38,5 +38,10 @@ int main(void) DEFINE(ESDCFG1_ROF, offsetof(struct esdramc_regs, esdcfg1)); DEFINE(ESDMISC_ROF, offsetof(struct esdramc_regs, esdmisc)); + DEFINE(GPCR, IMX_SYSTEM_CTL_BASE + + offsetof(struct system_control_regs, gpcr)); + DEFINE(FMCR, IMX_SYSTEM_CTL_BASE + + offsetof(struct system_control_regs, fmcr)); + return 0; } diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index 0392afd..68c30af 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -102,8 +102,9 @@ static uint8_t mxs_get_bootmode_index(void) return i; } -void mxs_common_spl_init(const iomux_cfg_t *iomux_setup, - const unsigned int iomux_size) +void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr, + const iomux_cfg_t *iomux_setup, + const unsigned int iomux_size) { struct mxs_spl_data *data = (struct mxs_spl_data *) ((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf); diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index f357959..4275c5d 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -14,6 +14,13 @@ #include "mxs_init.h" +/** + * mxs_power_clock2xtal() - Switch CPU core clock source to 24MHz XTAL + * + * This function switches the CPU core clock from PLL to 24MHz XTAL + * oscilator. This is necessary if the PLL is being reconfigured to + * prevent crash of the CPU core. + */ static void mxs_power_clock2xtal(void) { struct mxs_clkctrl_regs *clkctrl_regs = @@ -24,6 +31,13 @@ static void mxs_power_clock2xtal(void) &clkctrl_regs->hw_clkctrl_clkseq_set); } +/** + * mxs_power_clock2pll() - Switch CPU core clock source to PLL + * + * This function switches the CPU core clock from 24MHz XTAL oscilator + * to PLL. This can only be called once the PLL has re-locked and once + * the PLL is stable after reconfiguration. + */ static void mxs_power_clock2pll(void) { struct mxs_clkctrl_regs *clkctrl_regs = @@ -36,6 +50,13 @@ static void mxs_power_clock2pll(void) CLKCTRL_CLKSEQ_BYPASS_CPU); } +/** + * mxs_power_set_auto_restart() - Set the auto-restart bit + * + * This function ungates the RTC block and sets the AUTO_RESTART + * bit to work around a design bug on MX28EVK Rev. A . + */ + static void mxs_power_set_auto_restart(void) { struct mxs_rtc_regs *rtc_regs = @@ -66,6 +87,14 @@ static void mxs_power_set_auto_restart(void) ; } +/** + * mxs_power_set_linreg() - Set linear regulators 25mV below DC-DC converter + * + * This function configures the VDDIO, VDDA and VDDD linear regulators output + * to be 25mV below the VDDIO, VDDA and VDDD output from the DC-DC switching + * converter. This is the recommended setting for the case where we use both + * linear regulators and DC-DC converter to power the VDDIO rail. + */ static void mxs_power_set_linreg(void) { struct mxs_power_regs *power_regs = @@ -85,6 +114,11 @@ static void mxs_power_set_linreg(void) POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW); } +/** + * mxs_get_batt_volt() - Measure battery input voltage + * + * This function retrieves the battery input voltage and returns it. + */ static int mxs_get_batt_volt(void) { struct mxs_power_regs *power_regs = @@ -96,11 +130,24 @@ static int mxs_get_batt_volt(void) return volt; } +/** + * mxs_is_batt_ready() - Test if the battery provides enough voltage to boot + * + * This function checks if the battery input voltage is higher than 3.6V and + * therefore allows the system to successfully boot using this power source. + */ static int mxs_is_batt_ready(void) { return (mxs_get_batt_volt() >= 3600); } +/** + * mxs_is_batt_good() - Test if battery is operational at all + * + * This function starts recharging the battery and tests if the input current + * provided by the 5V input recharging the battery is also sufficient to power + * the DC-DC converter. + */ static int mxs_is_batt_good(void) { struct mxs_power_regs *power_regs = @@ -141,6 +188,15 @@ static int mxs_is_batt_good(void) return 0; } +/** + * mxs_power_setup_5v_detect() - Start the 5V input detection comparator + * + * This function enables the 5V detection comparator and sets the 5V valid + * threshold to 4.4V . We use 4.4V threshold here to make sure that even + * under high load, the voltage drop on the 5V input won't be so critical + * to cause undervolt on the 4P2 linear regulator supplying the DC-DC + * converter and thus making the system crash. + */ static void mxs_power_setup_5v_detect(void) { struct mxs_power_regs *power_regs = @@ -153,6 +209,12 @@ static void mxs_power_setup_5v_detect(void) POWER_5VCTRL_PWRUP_VBUS_CMPS); } +/** + * mxs_src_power_init() - Preconfigure the power block + * + * This function configures reasonable values for the DC-DC control loop + * and battery monitor. + */ static void mxs_src_power_init(void) { struct mxs_power_regs *power_regs = @@ -184,6 +246,12 @@ static void mxs_src_power_init(void) clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER); } +/** + * mxs_power_init_4p2_params() - Configure the parameters of the 4P2 regulator + * + * This function configures the necessary parameters for the 4P2 linear + * regulator to supply the DC-DC converter from 5V input. + */ static void mxs_power_init_4p2_params(void) { struct mxs_power_regs *power_regs = @@ -208,6 +276,12 @@ static void mxs_power_init_4p2_params(void) 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); } +/** + * mxs_enable_4p2_dcdc_input() - Enable or disable the DCDC input from 4P2 + * @xfer: Select if the input shall be enabled or disabled + * + * This function enables or disables the 4P2 input into the DC-DC converter. + */ static void mxs_enable_4p2_dcdc_input(int xfer) { struct mxs_power_regs *power_regs = @@ -304,6 +378,12 @@ static void mxs_enable_4p2_dcdc_input(int xfer) POWER_CTRL_ENIRQ_VDD5V_DROOP); } +/** + * mxs_power_init_4p2_regulator() - Start the 4P2 regulator + * + * This function enables the 4P2 regulator and switches the DC-DC converter + * to use the 4P2 input. + */ static void mxs_power_init_4p2_regulator(void) { struct mxs_power_regs *power_regs = @@ -388,6 +468,12 @@ static void mxs_power_init_4p2_regulator(void) writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr); } +/** + * mxs_power_init_dcdc_4p2_source() - Switch DC-DC converter to 4P2 source + * + * This function configures the DC-DC converter to be supplied from the 4P2 + * linear regulator. + */ static void mxs_power_init_dcdc_4p2_source(void) { struct mxs_power_regs *power_regs = @@ -410,6 +496,12 @@ static void mxs_power_init_dcdc_4p2_source(void) } } +/** + * mxs_power_enable_4p2() - Power up the 4P2 regulator + * + * This function drives the process of powering up the 4P2 linear regulator + * and switching the DC-DC converter input over to the 4P2 linear regulator. + */ static void mxs_power_enable_4p2(void) { struct mxs_power_regs *power_regs = @@ -469,6 +561,14 @@ static void mxs_power_enable_4p2(void) &power_regs->hw_power_charge_clr); } +/** + * mxs_boot_valid_5v() - Boot from 5V supply + * + * This function configures the power block to boot from valid 5V input. + * This is called only if the 5V is reliable and can properly supply the + * CPU. This function proceeds to configure the 4P2 converter to be supplied + * from the 5V input. + */ static void mxs_boot_valid_5v(void) { struct mxs_power_regs *power_regs = @@ -492,6 +592,11 @@ static void mxs_boot_valid_5v(void) mxs_power_enable_4p2(); } +/** + * mxs_powerdown() - Shut down the system + * + * This function powers down the CPU completely. + */ static void mxs_powerdown(void) { struct mxs_power_regs *power_regs = @@ -501,6 +606,12 @@ static void mxs_powerdown(void) &power_regs->hw_power_reset); } +/** + * mxs_batt_boot() - Configure the power block to boot from battery input + * + * This function configures the power block to boot from the battery voltage + * supply. + */ static void mxs_batt_boot(void) { struct mxs_power_regs *power_regs = @@ -545,6 +656,14 @@ static void mxs_batt_boot(void) 0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET); } +/** + * mxs_handle_5v_conflict() - Test if the 5V input is reliable + * + * This function tests if the 5V input can reliably supply the system. If it + * can, then proceed to configuring the system to boot from 5V source, otherwise + * try booting from battery supply. If we can not boot from battery supply + * either, shut down the system. + */ static void mxs_handle_5v_conflict(void) { struct mxs_power_regs *power_regs = @@ -581,6 +700,12 @@ static void mxs_handle_5v_conflict(void) } } +/** + * mxs_5v_boot() - Configure the power block to boot from 5V input + * + * This function handles configuration of the power block when supplied by + * a 5V input. + */ static void mxs_5v_boot(void) { struct mxs_power_regs *power_regs = @@ -604,6 +729,12 @@ static void mxs_5v_boot(void) mxs_handle_5v_conflict(); } +/** + * mxs_init_batt_bo() - Configure battery brownout threshold + * + * This function configures the battery input brownout threshold. The value + * at which the battery brownout happens is configured to 3.0V in the code. + */ static void mxs_init_batt_bo(void) { struct mxs_power_regs *power_regs = @@ -618,6 +749,12 @@ static void mxs_init_batt_bo(void) writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr); } +/** + * mxs_switch_vddd_to_dcdc_source() - Switch VDDD rail to DC-DC converter + * + * This function turns off the VDDD linear regulator and therefore makes + * the VDDD rail be supplied only by the DC-DC converter. + */ static void mxs_switch_vddd_to_dcdc_source(void) { struct mxs_power_regs *power_regs = @@ -632,6 +769,15 @@ static void mxs_switch_vddd_to_dcdc_source(void) POWER_VDDDCTRL_DISABLE_STEPPING); } +/** + * mxs_power_configure_power_source() - Configure power block source + * + * This function is the core of the power configuration logic. The function + * selects the power block input source and configures the whole power block + * accordingly. After the configuration is complete and the system is stable + * again, the function switches the CPU clock source back to PLL. Finally, + * the function switches the voltage rails to DC-DC converter. + */ static void mxs_power_configure_power_source(void) { int batt_ready, batt_good; @@ -676,6 +822,15 @@ static void mxs_power_configure_power_source(void) #endif } +/** + * mxs_enable_output_rail_protection() - Enable power rail protection + * + * This function enables overload protection on the power rails. This is + * triggered if the power rails' voltage drops rapidly due to overload and + * in such case, the supply to the powerrail is cut-off, protecting the + * CPU from damage. Note that under such condition, the system will likely + * crash or misbehave. + */ static void mxs_enable_output_rail_protection(void) { struct mxs_power_regs *power_regs = @@ -694,6 +849,13 @@ static void mxs_enable_output_rail_protection(void) POWER_VDDIOCTRL_PWDN_BRNOUT); } +/** + * mxs_get_vddio_power_source_off() - Get VDDIO rail power source + * + * This function tests if the VDDIO rail is supplied by linear regulator + * or by the DC-DC converter. Returns 1 if powered by linear regulator, + * returns 0 if powered by the DC-DC converter. + */ static int mxs_get_vddio_power_source_off(void) { struct mxs_power_regs *power_regs = @@ -722,6 +884,13 @@ static int mxs_get_vddio_power_source_off(void) } +/** + * mxs_get_vddd_power_source_off() - Get VDDD rail power source + * + * This function tests if the VDDD rail is supplied by linear regulator + * or by the DC-DC converter. Returns 1 if powered by linear regulator, + * returns 0 if powered by the DC-DC converter. + */ static int mxs_get_vddd_power_source_off(void) { struct mxs_power_regs *power_regs = @@ -810,6 +979,18 @@ static const struct mxs_vddx_cfg mxs_vddmem_cfg = { }; #endif +/** + * mxs_power_set_vddx() - Configure voltage on DC-DC converter rail + * @cfg: Configuration data of the DC-DC converter rail + * @new_target: New target voltage of the DC-DC converter rail + * @new_brownout: New brownout trigger voltage + * + * This function configures the output voltage on the DC-DC converter rail. + * The rail is selected by the @cfg argument. The new voltage target is + * selected by the @new_target and the voltage is specified in mV. The + * new brownout value is selected by the @new_brownout argument and the + * value is also in mV. + */ static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, uint32_t new_target, uint32_t new_brownout) { @@ -883,6 +1064,14 @@ static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, } } +/** + * mxs_setup_batt_detect() - Start the battery voltage measurement logic + * + * This function starts and configures the LRADC block. This allows the + * power initialization code to measure battery voltage and based on this + * knowledge, decide whether to boot at all, boot from battery or boot + * from 5V input. + */ static void mxs_setup_batt_detect(void) { mxs_lradc_init(); @@ -890,6 +1079,14 @@ static void mxs_setup_batt_detect(void) early_delay(10); } +/** + * mxs_ungate_power() - Ungate the POWER block + * + * This function ungates clock to the power block. In case the power block + * was still gated at this point, it will not be possible to configure the + * block and therefore the power initialization would fail. This function + * is only needed on i.MX233, on i.MX28 the power block is always ungated. + */ static void mxs_ungate_power(void) { #ifdef CONFIG_MX23 @@ -900,6 +1097,12 @@ static void mxs_ungate_power(void) #endif } +/** + * mxs_power_init() - The power block init main function + * + * This function calls all the power block initialization functions in + * proper sequence to start the power block. + */ void mxs_power_init(void) { struct mxs_power_regs *power_regs = @@ -933,6 +1136,12 @@ void mxs_power_init(void) } #ifdef CONFIG_SPL_MXS_PSWITCH_WAIT +/** + * mxs_power_wait_pswitch() - Wait for power switch to be pressed + * + * This function waits until the power-switch was pressed to start booting + * the board. + */ void mxs_power_wait_pswitch(void) { struct mxs_power_regs *power_regs = diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S index 94b2b3f..3e454ae 100644 --- a/arch/arm/cpu/arm926ejs/mxs/start.S +++ b/arch/arm/cpu/arm926ejs/mxs/start.S @@ -152,39 +152,49 @@ _reset: /* * Store all registers on old stack pointer, this will allow us later to * return to the BootROM and let the BootROM load U-Boot into RAM. + * + * WARNING: Register r0 and r1 are used by the BootROM to pass data + * to the called code. Register r0 will contain arbitrary + * data that are set in the BootStream. In case this code + * was started with CALL instruction, register r1 will contain + * pointer to the return value this function can then set. + * The code below MUST NOT CHANGE register r0 and r1 ! */ push {r0-r12,r14} - /* save control register c1 */ - mrc p15, 0, r0, c1, c0, 0 - push {r0} + /* Save control register c1 */ + mrc p15, 0, r2, c1, c0, 0 + push {r2} - /* - * set the cpu to SVC32 mode and store old CPSR register content - */ - mrs r0,cpsr - push {r0} - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 + /* Set the cpu to SVC32 mode and store old CPSR register content. */ + mrs r2, cpsr + push {r2} + bic r2, r2, #0x1f + orr r2, r2, #0xd3 + msr cpsr, r2 bl board_init_ll + /* Restore BootROM's CPU mode (especially FIQ). */ + pop {r2} + msr cpsr,r2 + /* - * restore bootrom's cpu mode (especially FIQ) + * Restore c1 register. Especially set exception vector location + * back to BootROM space which is required by bootrom for USB boot. */ - pop {r0} - msr cpsr,r0 + pop {r2} + mcr p15, 0, r2, c1, c0, 0 + + pop {r0-r12,r14} /* - * restore c1 register - * (especially set exception vector location back to - * bootrom space which is required by bootrom for USB boot) + * In case this code was started by the CALL instruction, the register + * r0 is examined by the BootROM after this code returns. The value in + * r0 must be set to 0 to indicate successful return. */ - pop {r0} - mcr p15, 0, r0, c1, c0, 0 + mov r0, #0 - pop {r0-r12,r14} bx lr _hang: diff --git a/arch/arm/cpu/arm946es/config.mk b/arch/arm/cpu/arm946es/config.mk index 1e41c11..eb81a57 100644 --- a/arch/arm/cpu/arm946es/config.mk +++ b/arch/arm/cpu/arm946es/config.mk @@ -5,8 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float - PLATFORM_CPPFLAGS += -march=armv4 # ========================================================================= # diff --git a/arch/arm/cpu/arm_intcm/config.mk b/arch/arm/cpu/arm_intcm/config.mk index 1e41c11..eb81a57 100644 --- a/arch/arm/cpu/arm_intcm/config.mk +++ b/arch/arm/cpu/arm_intcm/config.mk @@ -5,8 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float - PLATFORM_CPPFLAGS += -march=armv4 # ========================================================================= # diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 2ea3d69..a31bf40 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -27,6 +27,7 @@ #include <miiphy.h> #include <cpsw.h> #include <asm/errno.h> +#include <linux/compiler.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/usb/musb.h> @@ -137,6 +138,16 @@ int arch_misc_init(void) } #if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT) +/* + * This function is the place to do per-board things such as ramp up the + * MPU clock frequency. + */ +__weak void am33xx_spl_board_init(void) +{ + do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); + do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); +} + static void rtc32k_enable(void) { struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE; diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c index e5f287b..fabe259 100644 --- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c +++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c @@ -51,10 +51,14 @@ const struct dpll_regs dpll_ddr_regs = { .cm_div_m2_dpll = CM_WKUP + 0xA0, }; -const struct dpll_params dpll_mpu = { +struct dpll_params dpll_mpu_opp100 = { CONFIG_SYS_MPUCLK, OSC-1, 1, -1, -1, -1, -1}; -const struct dpll_params dpll_core = { +const struct dpll_params dpll_core_opp100 = { 1000, OSC-1, -1, -1, 10, 8, 4}; +const struct dpll_params dpll_mpu = { + MPUPLL_M_300, OSC-1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_core = { + 50, OSC-1, -1, -1, 1, 1, 1}; const struct dpll_params dpll_per = { 960, OSC-1, 5, -1, -1, -1, -1}; diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c index 63afaaa..50eb598 100644 --- a/arch/arm/cpu/armv7/am33xx/sys_info.c +++ b/arch/arm/cpu/armv7/am33xx/sys_info.c @@ -17,6 +17,7 @@ #include <asm/arch/sys_proto.h> #include <asm/arch/cpu.h> #include <asm/arch/clock.h> +#include <power/tps65910.h> struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE; @@ -119,3 +120,59 @@ int print_cpuinfo(void) return 0; } #endif /* CONFIG_DISPLAY_CPUINFO */ + +#ifdef CONFIG_AM33XX +int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev) +{ + int sil_rev; + + sil_rev = readl(&cdev->deviceid) >> 28; + + if (sil_rev == 1) + /* PG 2.0, efuse may not be set. */ + return MPUPLL_M_800; + else if (sil_rev >= 2) { + /* Check what the efuse says our max speed is. */ + int efuse_arm_mpu_max_freq; + efuse_arm_mpu_max_freq = readl(&cdev->efuse_sma); + switch ((efuse_arm_mpu_max_freq & DEVICE_ID_MASK)) { + case AM335X_ZCZ_1000: + return MPUPLL_M_1000; + case AM335X_ZCZ_800: + return MPUPLL_M_800; + case AM335X_ZCZ_720: + return MPUPLL_M_720; + case AM335X_ZCZ_600: + case AM335X_ZCE_600: + return MPUPLL_M_600; + case AM335X_ZCZ_300: + case AM335X_ZCE_300: + return MPUPLL_M_300; + } + } + + /* PG 1.0 or otherwise unknown, use the PG1.0 max */ + return MPUPLL_M_720; +} + +int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency) +{ + /* For PG2.1 and later, we have one set of values. */ + if (sil_rev >= 2) { + switch (frequency) { + case MPUPLL_M_1000: + return TPS65910_OP_REG_SEL_1_3_2_5; + case MPUPLL_M_800: + return TPS65910_OP_REG_SEL_1_2_6; + case MPUPLL_M_720: + return TPS65910_OP_REG_SEL_1_2_0; + case MPUPLL_M_600: + case MPUPLL_M_300: + return TPS65910_OP_REG_SEL_1_1_3; + } + } + + /* Default to PG1.0/PG2.0 values. */ + return TPS65910_OP_REG_SEL_1_1_3; +} +#endif diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk index ca4a9e7..f0d9c04 100644 --- a/arch/arm/cpu/armv7/config.mk +++ b/arch/arm/cpu/armv7/config.mk @@ -4,7 +4,6 @@ # # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float # If armv7-a is not supported by GCC fall-back to armv5, which is # supported by more tool-chains diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S index 82b2b86..69e3053 100644 --- a/arch/arm/cpu/armv7/lowlevel_init.S +++ b/arch/arm/cpu/armv7/lowlevel_init.S @@ -22,11 +22,11 @@ ENTRY(lowlevel_init) ldr sp, =CONFIG_SYS_INIT_SP_ADDR bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ #ifdef CONFIG_SPL_BUILD - ldr r8, =gdata + ldr r9, =gdata #else sub sp, #GD_SIZE bic sp, sp, #7 - mov r8, sp + mov r9, sp #endif /* * Save the old lr(passed in ip) and the current lr to stack diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index 7efb0d2..df11678 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -228,13 +228,13 @@ static u32 get_axi_clk(void) static u32 get_emi_slow_clk(void) { - u32 emi_clk_sel, emi_slow_pof, cscmr1, root_freq = 0; + u32 emi_clk_sel, emi_slow_podf, cscmr1, root_freq = 0; cscmr1 = __raw_readl(&imx_ccm->cscmr1); emi_clk_sel = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK; emi_clk_sel >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_OFFSET; - emi_slow_pof = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK; - emi_slow_pof >>= MXC_CCM_CSCMR1_ACLK_EMI_PODF_OFFSET; + emi_slow_podf = cscmr1 & MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK; + emi_slow_podf >>= MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET; switch (emi_clk_sel) { case 0: @@ -251,7 +251,7 @@ static u32 get_emi_slow_clk(void) break; } - return root_freq / (emi_slow_pof + 1); + return root_freq / (emi_slow_podf + 1); } #ifdef CONFIG_MX6SL @@ -282,6 +282,36 @@ static u32 get_mmdc_ch0_clk(void) return freq / (podf + 1); } + +int enable_fec_anatop_clock(void) +{ + u32 reg = 0; + s32 timeout = 100000; + + struct anatop_regs __iomem *anatop = + (struct anatop_regs __iomem *)ANATOP_BASE_ADDR; + + reg = readl(&anatop->pll_enet); + if ((reg & BM_ANADIG_PLL_ENET_POWERDOWN) || + (!(reg & BM_ANADIG_PLL_ENET_LOCK))) { + reg &= ~BM_ANADIG_PLL_ENET_POWERDOWN; + writel(reg, &anatop->pll_enet); + while (timeout--) { + if (readl(&anatop->pll_enet) & BM_ANADIG_PLL_ENET_LOCK) + break; + } + if (timeout < 0) + return -ETIMEDOUT; + } + + /* Enable FEC clock */ + reg |= BM_ANADIG_PLL_ENET_ENABLE; + reg &= ~BM_ANADIG_PLL_ENET_BYPASS; + writel(reg, &anatop->pll_enet); + + return 0; +} + #else static u32 get_mmdc_ch0_clk(void) { @@ -457,7 +487,7 @@ void enable_ipu_clock(void) struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; int reg; reg = readl(&mxc_ccm->CCGR3); - reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET; + reg |= MXC_CCM_CCGR3_IPU1_IPU_MASK; writel(reg, &mxc_ccm->CCGR3); } /***************************************************/ diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 6b4772b..0ffa03a 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -76,6 +76,9 @@ void spl_board_init(void) #if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT) arch_misc_init(); #endif +#ifdef CONFIG_AM33XX + am33xx_spl_board_init(); +#endif } int board_mmc_init(bd_t *bis) diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index 7580594..ab0c568 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -589,13 +589,6 @@ void scale_vcores(struct vcores_data const *vcores) val = optimize_vcore_voltage(&vcores->iva); do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic); - - if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) { - /* Configure LDO SRAM "magic" bits */ - writel(2, (*prcm)->prm_sldo_core_setup); - writel(2, (*prcm)->prm_sldo_mpu_setup); - writel(2, (*prcm)->prm_sldo_mm_setup); - } } static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode) diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index 579818d..5a3d52c 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -286,12 +286,6 @@ struct prcm_regs const omap5_es1_prcm = { .prm_vc_val_bypass = 0x4ae07ba0, .prm_vc_cfg_i2c_mode = 0x4ae07bb4, .prm_vc_cfg_i2c_clk = 0x4ae07bb8, - .prm_sldo_core_setup = 0x4ae07bc4, - .prm_sldo_core_ctrl = 0x4ae07bc8, - .prm_sldo_mpu_setup = 0x4ae07bcc, - .prm_sldo_mpu_ctrl = 0x4ae07bd0, - .prm_sldo_mm_setup = 0x4ae07bd4, - .prm_sldo_mm_ctrl = 0x4ae07bd8, /* SCRM stuff, used by some boards */ .scrm_auxclk0 = 0x4ae0a310, @@ -735,12 +729,6 @@ struct prcm_regs const omap5_es2_prcm = { .prm_vc_cfg_i2c_mode = 0x4ae07cb4, .prm_vc_cfg_i2c_clk = 0x4ae07cb8, - .prm_sldo_core_setup = 0x4ae07cc4, - .prm_sldo_core_ctrl = 0x4ae07cc8, - .prm_sldo_mpu_setup = 0x4ae07ccc, - .prm_sldo_mpu_ctrl = 0x4ae07cd0, - .prm_sldo_mm_setup = 0x4ae07cd4, - .prm_sldo_mm_ctrl = 0x4ae07cd8, .prm_abbldo_mpu_setup = 0x4ae07cdc, .prm_abbldo_mpu_ctrl = 0x4ae07ce0, diff --git a/arch/arm/cpu/armv7/rmobile/config.mk b/arch/arm/cpu/armv7/rmobile/config.mk index 4f01610..3a36ab6 100644 --- a/arch/arm/cpu/armv7/rmobile/config.mk +++ b/arch/arm/cpu/armv7/rmobile/config.mk @@ -4,7 +4,6 @@ # # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float # Make ARMv5 to allow more compilers to work, even though its v7a. PLATFORM_CPPFLAGS += -march=armv5 diff --git a/arch/arm/cpu/armv7/zynq/timer.c b/arch/arm/cpu/armv7/zynq/timer.c index 0133565..3b8d949 100644 --- a/arch/arm/cpu/armv7/zynq/timer.c +++ b/arch/arm/cpu/armv7/zynq/timer.c @@ -57,7 +57,7 @@ int timer_init(void) SCUTIMER_CONTROL_ENABLE_MASK; /* Load the timer counter register */ - writel(0xFFFFFFFF, &timer_base->counter); + writel(0xFFFFFFFF, &timer_base->load); /* * Start the A9Timer device diff --git a/arch/arm/cpu/ixp/config.mk b/arch/arm/cpu/ixp/config.mk index 0f12f8b..fd47c60 100644 --- a/arch/arm/cpu/ixp/config.mk +++ b/arch/arm/cpu/ixp/config.mk @@ -8,7 +8,7 @@ BIG_ENDIAN = y -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float -mbig-endian +PLATFORM_RELFLAGS += -mbig-endian PLATFORM_CPPFLAGS += -mbig-endian -march=armv5te -mtune=strongarm1100 diff --git a/arch/arm/cpu/pxa/config.mk b/arch/arm/cpu/pxa/config.mk index 535bca3..d8d263d 100644 --- a/arch/arm/cpu/pxa/config.mk +++ b/arch/arm/cpu/pxa/config.mk @@ -6,8 +6,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float - PLATFORM_CPPFLAGS += -mcpu=xscale # ========================================================================= # diff --git a/arch/arm/cpu/s3c44b0/Makefile b/arch/arm/cpu/s3c44b0/Makefile deleted file mode 100644 index 39fdbf8..0000000 --- a/arch/arm/cpu/s3c44b0/Makefile +++ /dev/null @@ -1,34 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(CPU).o - -START = start.o - -COBJS += cache.o -COBJS += cpu.o -COBJS += timer.o - -SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -START := $(addprefix $(obj),$(START)) - -all: $(obj).depend $(START) $(LIB) - -$(LIB): $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/arch/arm/cpu/s3c44b0/cache.c b/arch/arm/cpu/s3c44b0/cache.c deleted file mode 100644 index aeee02d..0000000 --- a/arch/arm/cpu/s3c44b0/cache.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * (C) Copyright 2004 - * DAVE Srl - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <asm/hardware.h> - -static void s3c44b0_flush_cache(void) -{ - volatile int i; - /* flush cycle */ - for(i=0x10002000;i<0x10004800;i+=16) - { - *((int *)i)=0x0; - } -} - -void icache_enable (void) -{ - ulong reg; - - s3c44b0_flush_cache(); - - /* - Init cache - Non-cacheable area (everything outside RAM) - 0x0000:0000 - 0x0C00:0000 - */ - NCACHBE0 = 0xC0000000; - NCACHBE1 = 0x00000000; - - /* - Enable chache - */ - reg = SYSCFG; - reg |= 0x00000006; /* 8kB */ - SYSCFG = reg; -} - -void icache_disable (void) -{ - ulong reg; - - reg = SYSCFG; - reg &= ~0x00000006; /* 8kB */ - SYSCFG = reg; -} - -int icache_status (void) -{ - return 0; -} - -void dcache_enable (void) -{ - icache_enable(); -} - -void dcache_disable (void) -{ - icache_disable(); -} - -int dcache_status (void) -{ - return dcache_status(); -} diff --git a/arch/arm/cpu/s3c44b0/config.mk b/arch/arm/cpu/s3c44b0/config.mk deleted file mode 100644 index b902ca3..0000000 --- a/arch/arm/cpu/s3c44b0/config.mk +++ /dev/null @@ -1,18 +0,0 @@ -# -# (C) Copyright 2002 -# Sysgo Real-Time Solutions, GmbH <www.elinos.com> -# Marius Groeger <mgroeger@sysgo.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float - -PLATFORM_CPPFLAGS += -march=armv4 -mtune=arm7tdmi -msoft-float -# ========================================================================= -# -# Supply options according to compiler version -# -# ======================================================================== -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) diff --git a/arch/arm/cpu/s3c44b0/cpu.c b/arch/arm/cpu/s3c44b0/cpu.c deleted file mode 100644 index fa93150..0000000 --- a/arch/arm/cpu/s3c44b0/cpu.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * (C) Copyright 2004 - * DAVE Srl - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * S3C44B0 CPU specific code - */ - -#include <common.h> -#include <command.h> -#include <asm/hardware.h> - -int arch_cpu_init (void) -{ - icache_enable(); - - return 0; -} - -int cleanup_before_linux (void) -{ - /* - cache memory should be enabled before calling - Linux to make the kernel uncompression faster - */ - icache_enable(); - - disable_interrupts (); - - return 0; -} - -void reset_cpu (ulong addr) -{ - /* - reset the cpu using watchdog - */ - - /* Disable the watchdog.*/ - WTCON&=~(1<<5); - - /* set the timeout value to a short time... */ - WTCNT = 0x1; - - /* Enable the watchdog. */ - WTCON|=1; - WTCON|=(1<<5); - - while(1) { - /*NOP*/ - } -} diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S deleted file mode 100644 index 6a59592..0000000 --- a/arch/arm/cpu/s3c44b0/start.S +++ /dev/null @@ -1,228 +0,0 @@ -/* - * Startup Code for S3C44B0 CPU-core - * - * (C) Copyright 2004 - * DAVE Srl - * - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm-offsets.h> -#include <config.h> -#include <version.h> - -/* - * Jump vector table - */ - - -.globl _start -_start: b reset - add pc, pc, #0x0c000000 - add pc, pc, #0x0c000000 - add pc, pc, #0x0c000000 - add pc, pc, #0x0c000000 - add pc, pc, #0x0c000000 - add pc, pc, #0x0c000000 - add pc, pc, #0x0c000000 - - .balignl 16,0xdeadbeef - - -/* - ************************************************************************* - * - * Startup Code (reset vector) - * - * do important init only if we don't start from memory! - * relocate u-boot to ram - * setup stack - * jump to second stage - * - ************************************************************************* - */ - -.globl _TEXT_BASE -_TEXT_BASE: -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) - .word CONFIG_SPL_TEXT_BASE -#else - .word CONFIG_SYS_TEXT_BASE -#endif - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit - /* - * before relocating, we have to setup RAM timing - * because memory timing is board-dependend, you will - * find a lowlevel_init.S in your board directory. - */ - bl lowlevel_init -#endif - - bl _main - -/*------------------------------------------------------------------------------*/ - - .globl c_runtime_cpu_setup -c_runtime_cpu_setup: - - bx lr - -/* - ************************************************************************* - * - * CPU_init_critical registers - * - * setup important registers - * setup memory timing - * - ************************************************************************* - */ - -#define INTCON (0x01c00000+0x200000) -#define INTMSK (0x01c00000+0x20000c) -#define LOCKTIME (0x01c00000+0x18000c) -#define PLLCON (0x01c00000+0x180000) -#define CLKCON (0x01c00000+0x180004) -#define WTCON (0x01c00000+0x130000) -cpu_init_crit: - /* disable watch dog */ - ldr r0, =WTCON - ldr r1, =0x0 - str r1, [r0] - - /* - * mask all IRQs by clearing all bits in the INTMRs - */ - ldr r1,=INTMSK - ldr r0, =0x03fffeff - str r0, [r1] - - ldr r1, =INTCON - ldr r0, =0x05 - str r0, [r1] - - /* Set Clock Control Register */ - ldr r1, =LOCKTIME - ldrb r0, =800 - strb r0, [r1] - - ldr r1, =PLLCON - -#if CONFIG_S3C44B0_CLOCK_SPEED==66 - ldr r0, =0x34031 /* 66MHz (Quartz=11MHz) */ -#elif CONFIG_S3C44B0_CLOCK_SPEED==75 - ldr r0, =0x610c1 /*B2: Xtal=20mhz Fclk=75MHz */ -#else -# error CONFIG_S3C44B0_CLOCK_SPEED undefined -#endif - - str r0, [r1] - - ldr r1,=CLKCON - ldr r0, =0x7ff8 - str r0, [r1] - - mov pc, lr - - -/*************************************************/ -/* interrupt vectors */ -/*************************************************/ -real_vectors: - b reset - b undefined_instruction - b software_interrupt - b prefetch_abort - b data_abort - b not_used - b irq - b fiq - -/*************************************************/ - -undefined_instruction: - mov r6, #3 - b reset - -software_interrupt: - mov r6, #4 - b reset - -prefetch_abort: - mov r6, #5 - b reset - -data_abort: - mov r6, #6 - b reset - -not_used: - /* we *should* never reach this */ - mov r6, #7 - b reset - -irq: - mov r6, #8 - b reset - -fiq: - mov r6, #9 - b reset diff --git a/arch/arm/cpu/s3c44b0/timer.c b/arch/arm/cpu/s3c44b0/timer.c deleted file mode 100644 index f25af7a..0000000 --- a/arch/arm/cpu/s3c44b0/timer.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * (C) Copyright 2004 - * DAVE Srl - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/hardware.h> - -/* we always count down the max. */ -#define TIMER_LOAD_VAL 0xffff - -/* macro to read the 16 bit timer */ -#define READ_TIMER (TCNTO1 & 0xffff) - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ NOT supported -#endif - -static ulong timestamp; -static ulong lastdec; - -int timer_init (void) -{ - TCFG0 = 0x000000E9; - TCFG1 = 0x00000004; - TCON = 0x00000900; - TCNTB1 = TIMER_LOAD_VAL; - TCMPB1 = 0; - TCON = 0x00000B00; - TCON = 0x00000900; - - - lastdec = TCNTB1 = TIMER_LOAD_VAL; - timestamp = 0; - return 0; -} - -/* - * timer without interrupts - */ -ulong get_timer (ulong base) -{ - return get_timer_masked () - base; -} - -void __udelay (unsigned long usec) -{ - ulong tmo; - - tmo = usec / 1000; - tmo *= CONFIG_SYS_HZ; - tmo /= 8; - - tmo += get_timer (0); - - while (get_timer_masked () < tmo) - /*NOP*/; -} - -ulong get_timer_masked (void) -{ - ulong now = READ_TIMER; - - if (lastdec >= now) { - /* normal mode */ - timestamp += lastdec - now; - } else { - /* we have an overflow ... */ - timestamp += lastdec + TIMER_LOAD_VAL - now; - } - lastdec = now; - - return timestamp; -} - -void udelay_masked (unsigned long usec) -{ - ulong tmo; - ulong endtime; - signed long diff; - - if (usec >= 1000) { - tmo = usec / 1000; - tmo *= CONFIG_SYS_HZ; - tmo /= 8; - } else { - tmo = usec * CONFIG_SYS_HZ; - tmo /= (1000*8); - } - - endtime = get_timer(0) + tmo; - - do { - ulong now = get_timer_masked (); - diff = endtime - now; - } while (diff >= 0); -} diff --git a/arch/arm/cpu/sa1100/config.mk b/arch/arm/cpu/sa1100/config.mk index 576f685..b3026cc 100644 --- a/arch/arm/cpu/sa1100/config.mk +++ b/arch/arm/cpu/sa1100/config.mk @@ -6,8 +6,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float - PLATFORM_CPPFLAGS += -march=armv4 -mtune=strongarm1100 # ========================================================================= # diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h index 140379f..02ed595 100644 --- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h +++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h @@ -11,9 +11,17 @@ #ifndef _CLOCKS_AM33XX_H_ #define _CLOCKS_AM33XX_H_ +/* MAIN PLL Fdll supported frequencies */ +#define MPUPLL_M_1000 1000 +#define MPUPLL_M_800 800 +#define MPUPLL_M_720 720 +#define MPUPLL_M_600 600 +#define MPUPLL_M_550 550 +#define MPUPLL_M_300 300 + /* MAIN PLL Fdll = 550 MHz, by default */ #ifndef CONFIG_SYS_MPUCLK -#define CONFIG_SYS_MPUCLK 550 +#define CONFIG_SYS_MPUCLK MPUPLL_M_550 #endif #define UART_RESET (0x1 << 1) @@ -21,5 +29,7 @@ #define UART_SMART_IDLE_EN (0x1 << 0x3) extern void enable_dmm_clocks(void); +extern const struct dpll_params dpll_core_opp100; +extern struct dpll_params dpll_mpu_opp100; #endif /* endif _CLOCKS_AM33XX_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index 73e6db8..52fa128 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -38,6 +38,16 @@ #define AM335X 0xB944 #define TI81XX 0xB81E #define DEVICE_ID (CTRL_BASE + 0x0600) +#define DEVICE_ID_MASK 0x1FFF + +/* MPU max frequencies */ +#define AM335X_ZCZ_300 0x1FEF +#define AM335X_ZCZ_600 0x1FAF +#define AM335X_ZCZ_720 0x1F2F +#define AM335X_ZCZ_800 0x1E2F +#define AM335X_ZCZ_1000 0x1C2F +#define AM335X_ZCE_300 0x1FDF +#define AM335X_ZCE_600 0x1F9F /* This gives the status of the boot mode pins on the evm */ #define SYSBOOT_MASK (BIT(0) | BIT(1) | BIT(2)\ @@ -509,6 +519,8 @@ struct ctrl_dev { unsigned int macid1h; /* offset 0x3c */ unsigned int resv4[4]; unsigned int miisel; /* offset 0x50 */ + unsigned int resv5[106]; + unsigned int efuse_sma; /* offset 0x1FC */ }; /* gmii_sel register defines */ diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index c6070a3..87b7d36 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -10,6 +10,7 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ +#include <asm/arch/cpu.h> #define BOARD_REV_ID 0x0 @@ -42,4 +43,7 @@ u32 wait_on_value(u32, u32, void *, u32); #ifdef CONFIG_NOR_BOOT void enable_norboot_pin_mux(void); #endif +void am33xx_spl_board_init(void); +int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev); +int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency); #endif diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h index a27145b..92c847e 100644 --- a/arch/arm/include/asm/arch-mx27/imx-regs.h +++ b/arch/arm/include/asm/arch-mx27/imx-regs.h @@ -169,7 +169,7 @@ struct iim_regs { struct fuse_bank { u32 fuse_regs[0x20]; u32 fuse_rsvd[0xe0]; - } bank[1]; + } bank[2]; }; struct fuse_bank0_regs { @@ -209,9 +209,13 @@ struct fuse_bank0_regs { #define IIM_BASE_ADDR IMX_IIM_BASE #define IMX_FEC_BASE (0x2b000 + IMX_IO_BASE) +#define IMX_NFC_BASE (0xD8000000) #define IMX_ESD_BASE (0xD8001000) #define IMX_WEIM_BASE (0xD8002000) +#define NFC_BASE_ADDR IMX_NFC_BASE + + /* FMCR System Control bit definition*/ #define UART4_RXD_CTL (1 << 25) #define UART4_RTS_CTL (1 << 24) diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index c493687..93f29a7 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -50,4 +50,5 @@ void enable_usboh3_clk(unsigned char enable); int enable_sata_clock(void); int enable_i2c_clk(unsigned char enable, unsigned i2c_num); void enable_ipu_clock(void); +int enable_fec_anatop_clock(void); #endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index 74aefe6..2813593 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -892,7 +892,7 @@ struct mxc_ccm_reg { #define PLL2_PFD0_FREQ 352000000 #define PLL2_PFD1_FREQ 594000000 -#define PLL2_PFD2_FREQ 400000000 +#define PLL2_PFD2_FREQ 396000000 #define PLL2_PFD2_DIV_FREQ 200000000 #define PLL3_PFD0_FREQ 720000000 #define PLL3_PFD1_FREQ 540000000 diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h index f4cfd4f..ff13a1e 100644 --- a/arch/arm/include/asm/arch-mx6/iomux.h +++ b/arch/arm/include/asm/arch-mx6/iomux.h @@ -27,6 +27,11 @@ #define IOMUXC_GPR13_SATA_PHY_2_MASK (0x1f<<2) #define IOMUXC_GPR13_SATA_PHY_1_MASK (3<<0) +#define IOMUX_GPR1_FEC_CLOCK_MUX1_SEL_MASK (0x3 << 17) +#define IOMUX_GPR1_FEC_CLOCK_MUX2_SEL_MASK (0x1 << 14) +#define IOMUX_GPR1_FEC_MASK (IOMUX_GPR1_FEC_CLOCK_MUX1_SEL_MASK \ + | IOMUX_GPR1_FEC_CLOCK_MUX2_SEL_MASK) + #define IOMUXC_GPR13_SATA_PHY_8_RXEQ_0P5DB (0<<24) #define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P0DB (1<<24) #define IOMUXC_GPR13_SATA_PHY_8_RXEQ_1P5DB (2<<24) diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h index c3d0b70..b5df68a 100644 --- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h @@ -235,7 +235,7 @@ enum { MX6_PAD_DISP0_DAT1__GPIO_4_22 = IOMUX_PAD(0x03C8, 0x00B4, 5, 0x0000, 0, 0), MX6_PAD_DISP0_DAT1__MMDC_MMDC_DEBUG_6 = IOMUX_PAD(0x03C8, 0x00B4, 6, 0x0000, 0, 0), MX6_PAD_DISP0_DAT1__PL301_SIM_MX6DL_PER1_HADDR_12 = IOMUX_PAD(0x03C8, 0x00B4, 7, 0x0000, 0, 0), - MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6_PAD_DISP0_DAT10__LCDIF_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 1, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6_PAD_DISP0_DAT10__USDHC1_USDHC_DEBUG_6 = IOMUX_PAD(0x03CC, 0x00B8, 3, 0x0000, 0, 0), MX6_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 = IOMUX_PAD(0x03CC, 0x00B8, 4, 0x0000, 0, 0), @@ -309,7 +309,7 @@ enum { MX6_PAD_DISP0_DAT19__GPIO_5_13 = IOMUX_PAD(0x03F0, 0x00DC, 5, 0x0000, 0, 0), MX6_PAD_DISP0_DAT19__MMDC_MMDC_DEBUG_24 = IOMUX_PAD(0x03F0, 0x00DC, 6, 0x0000, 0, 0), MX6_PAD_DISP0_DAT19__WEIM_WEIM_CS_3 = IOMUX_PAD(0x03F0, 0x00DC, 7, 0x0000, 0, 0), - MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), MX6_PAD_DISP0_DAT2__LCDIF_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 1, 0x0000, 0, 0), MX6_PAD_DISP0_DAT2__ECSPI3_MISO = IOMUX_PAD(0x03F4, 0x00E0, 2, 0x0000, 0, 0), MX6_PAD_DISP0_DAT2__USDHC1_USDHC_DEBUG_2 = IOMUX_PAD(0x03F4, 0x00E0, 3, 0x0000, 0, 0), @@ -1043,7 +1043,7 @@ enum { MX6_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x05E0, 0x0210, 0, 0x083C, 1, 0), MX6_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x05E0, 0x0210, 1, 0x0000, 0, 0), MX6_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x05E0, 0x0210, 2, 0x08CC, 1, 0), - MX6_PAD_GPIO_1__USBOTG_ID = IOMUX_PAD(0x05E0, 0x0210, 3, 0x0790, 1, 0), + MX6_PAD_GPIO_1__USB_OTG_ID = IOMUX_PAD(0x05E0, 0x0210, 3, 0x0790, 1, 0), MX6_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x05E0, 0x0210, 4, 0x0000, 0, 0), MX6_PAD_GPIO_1__GPIO_1_1 = IOMUX_PAD(0x05E0, 0x0210, 5, 0x0000, 0, 0), MX6_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05E0, 0x0210, 6, 0x0000, 0, 0), diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h index 94df007..fe9a8c3 100644 --- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h @@ -984,6 +984,7 @@ enum { MX6_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x05F4, 0x0224, 0, 0x086C, 1, 0), MX6_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x05F4, 0x0224, 1, 0x0000, 0, 0), MX6_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x05F4, 0x0224, 2, 0x08F4, 0, 0), + MX6_PAD_GPIO_1__USB_OTG_ID = IOMUX_PAD(0x05F4, 0x0224, 3, 0x0000, 0, 0), MX6_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x05F4, 0x0224, 4, 0x0000, 0, 0), MX6_PAD_GPIO_1__GPIO_1_1 = IOMUX_PAD(0x05F4, 0x0224, 5, 0x0000, 0, 0), MX6_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05F4, 0x0224, 6, 0x0000, 0, 0), diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h index b39a354..5f9c90a 100644 --- a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h @@ -18,5 +18,17 @@ enum { MX6_PAD_SD2_DAT3__USDHC2_DAT3 = IOMUX_PAD(0x0570, 0x0268, 0, 0x0000, 0, 0), MX6_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x05A0, 0x0298, 0, 0x07FC, 0, 0), MX6_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x05A4, 0x029C, 0, 0x0000, 0, 0), + + MX6_PAD_FEC_MDC__FEC_MDC = IOMUX_PAD(0x41c, 0x12c, 0, 0x000, 0, 0), + MX6_PAD_FEC_MDIO__FEC_MDIO = IOMUX_PAD(0x420, 0x130, 0, 0x6f4, 1, 0), + MX6_PAD_FEC_CRS_DV__FEC_RX_DV = IOMUX_PAD(0x418, 0x128, 0, 0x704, 1, 0), + MX6_PAD_FEC_RXD0__FEC_RX_DATA0 = IOMUX_PAD(0x42c, 0x13c, 0, 0x6f8, 0, 0), + MX6_PAD_FEC_RXD1__FEC_RX_DATA1 = IOMUX_PAD(0x430, 0x140, 0, 0x6fc, 1, 0), + MX6_PAD_FEC_TX_EN__FEC_TX_EN = IOMUX_PAD(0x438, 0x148, 0, 0x000, 0, 0), + MX6_PAD_FEC_TXD0__FEC_TX_DATA0 = IOMUX_PAD(0x43c, 0x14c, 0, 0x000, 0, 0), + MX6_PAD_FEC_TXD1__FEC_TX_DATA1 = IOMUX_PAD(0x440, 0x150, 0, 0x000, 0, 0), + MX6_PAD_FEC_REF_CLK__FEC_REF_OUT = IOMUX_PAD(0x424, 0x134, 0x10, 0x000, 0, 0), + MX6_PAD_FEC_RX_ER__GPIO_4_19 = IOMUX_PAD(0x0428, 0x0138, 5, 0x0000, 0, 0), + MX6_PAD_FEC_TX_CLK__GPIO_4_21 = IOMUX_PAD(0x0434, 0x0144, 5, 0x0000, 0, 0), }; #endif /* __ASM_ARCH_MX6_MX6SL_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h index 1038592..43c7dd6 100644 --- a/arch/arm/include/asm/arch-mxs/sys_proto.h +++ b/arch/arm/include/asm/arch-mxs/sys_proto.h @@ -28,8 +28,9 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int)); #include <asm/arch/iomux-mx28.h> #endif -void mxs_common_spl_init(const iomux_cfg_t *iomux_setup, - const unsigned int iomux_size); +void mxs_common_spl_init(const uint32_t arg, const uint32_t *resptr, + const iomux_cfg_t *iomux_setup, + const unsigned int iomux_size); #endif struct mxs_pair { diff --git a/arch/arm/include/asm/arch-s3c44b0/hardware.h b/arch/arm/include/asm/arch-s3c44b0/hardware.h deleted file mode 100644 index 146e265..0000000 --- a/arch/arm/include/asm/arch-s3c44b0/hardware.h +++ /dev/null @@ -1,281 +0,0 @@ -/********************************************************/ -/* */ -/* Samsung S3C44B0 */ -/* tpu <tapu@371.net> */ -/* */ -/********************************************************/ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#define REGBASE 0x01c00000 -#define REGL(addr) (*(volatile unsigned int *)(REGBASE+addr)) -#define REGW(addr) (*(volatile unsigned short *)(REGBASE+addr)) -#define REGB(addr) (*(volatile unsigned char *)(REGBASE+addr)) - - -/*****************************/ -/* CPU Wrapper Registers */ -/*****************************/ - -#define SYSCFG REGL(0x000000) -#define NCACHBE0 REGL(0x000004) -#define NCACHBE1 REGL(0x000008) -#define SBUSCON REGL(0x040000) - -/************************************/ -/* Memory Controller Registers */ -/************************************/ - -#define BWSCON REGL(0x080000) -#define BANKCON0 REGL(0x080004) -#define BANKCON1 REGL(0x080008) -#define BANKCON2 REGL(0x08000c) -#define BANKCON3 REGL(0x080010) -#define BANKCON4 REGL(0x080014) -#define BANKCON5 REGL(0x080018) -#define BANKCON6 REGL(0x08001c) -#define BANKCON7 REGL(0x080020) -#define REFRESH REGL(0x080024) -#define BANKSIZE REGL(0x080028) -#define MRSRB6 REGL(0x08002c) -#define MRSRB7 REGL(0x080030) - -/*********************/ -/* UART Registers */ -/*********************/ - -#define ULCON0 REGL(0x100000) -#define ULCON1 REGL(0x104000) -#define UCON0 REGL(0x100004) -#define UCON1 REGL(0x104004) -#define UFCON0 REGL(0x100008) -#define UFCON1 REGL(0x104008) -#define UMCON0 REGL(0x10000c) -#define UMCON1 REGL(0x10400c) -#define UTRSTAT0 REGL(0x100010) -#define UTRSTAT1 REGL(0x104010) -#define UERSTAT0 REGL(0x100014) -#define UERSTAT1 REGL(0x104014) -#define UFSTAT0 REGL(0x100018) -#define UFSTAT1 REGL(0x104018) -#define UMSTAT0 REGL(0x10001c) -#define UMSTAT1 REGL(0x10401c) -#define UTXH0 REGB(0x100020) -#define UTXH1 REGB(0x104020) -#define URXH0 REGB(0x100024) -#define URXH1 REGB(0x104024) -#define UBRDIV0 REGL(0x100028) -#define UBRDIV1 REGL(0x104028) - -/*******************/ -/* SIO Registers */ -/*******************/ - -#define SIOCON REGL(0x114000) -#define SIODAT REGL(0x114004) -#define SBRDR REGL(0x114008) -#define ITVCNT REGL(0x11400c) -#define DCNTZ REGL(0x114010) - -/********************/ -/* IIS Registers */ -/********************/ - -#define IISCON REGL(0x118000) -#define IISMOD REGL(0x118004) -#define IISPSR REGL(0x118008) -#define IISFIFCON REGL(0x11800c) -#define IISFIF REGW(0x118010) - -/**************************/ -/* I/O Ports Registers */ -/**************************/ - -#define PCONA REGL(0x120000) -#define PDATA REGL(0x120004) -#define PCONB REGL(0x120008) -#define PDATB REGL(0x12000c) -#define PCONC REGL(0x120010) -#define PDATC REGL(0x120014) -#define PUPC REGL(0x120018) -#define PCOND REGL(0x12001c) -#define PDATD REGL(0x120020) -#define PUPD REGL(0x120024) -#define PCONE REGL(0x120028) -#define PDATE REGL(0x12002c) -#define PUPE REGL(0x120030) -#define PCONF REGL(0x120034) -#define PDATF REGL(0x120038) -#define PUPF REGL(0x12003c) -#define PCONG REGL(0x120040) -#define PDATG REGL(0x120044) -#define PUPG REGL(0x120048) -#define SPUCR REGL(0x12004c) -#define EXTINT REGL(0x120050) -#define EXTINTPND REGL(0x120054) - -/*********************************/ -/* WatchDog Timers Registers */ -/*********************************/ - -#define WTCON REGL(0x130000) -#define WTDAT REGL(0x130004) -#define WTCNT REGL(0x130008) - -/*********************************/ -/* A/D Converter Registers */ -/*********************************/ - -#define ADCCON REGL(0x140000) -#define ADCPSR REGL(0x140004) -#define ADCDAT REGL(0x140008) - -/***************************/ -/* PWM Timer Registers */ -/***************************/ - -#define TCFG0 REGL(0x150000) -#define TCFG1 REGL(0x150004) -#define TCON REGL(0x150008) -#define TCNTB0 REGL(0x15000c) -#define TCMPB0 REGL(0x150010) -#define TCNTO0 REGL(0x150014) -#define TCNTB1 REGL(0x150018) -#define TCMPB1 REGL(0x15001c) -#define TCNTO1 REGL(0x150020) -#define TCNTB2 REGL(0x150024) -#define TCMPB2 REGL(0x150028) -#define TCNTO2 REGL(0x15002c) -#define TCNTB3 REGL(0x150030) -#define TCMPB3 REGL(0x150034) -#define TCNTO3 REGL(0x150038) -#define TCNTB4 REGL(0x15003c) -#define TCMPB4 REGL(0x150040) -#define TCNTO4 REGL(0x150044) -#define TCNTB5 REGL(0x150048) -#define TCNTO5 REGL(0x15004c) - -/*********************/ -/* IIC Registers */ -/*********************/ - -#define IICCON REGL(0x160000) -#define IICSTAT REGL(0x160004) -#define IICADD REGL(0x160008) -#define IICDS REGL(0x16000c) - -/*********************/ -/* RTC Registers */ -/*********************/ - -#define RTCCON REGB(0x170040) -#define RTCALM REGB(0x170050) -#define ALMSEC REGB(0x170054) -#define ALMMIN REGB(0x170058) -#define ALMHOUR REGB(0x17005c) -#define ALMDAY REGB(0x170060) -#define ALMMON REGB(0x170064) -#define ALMYEAR REGB(0x170068) -#define RTCRST REGB(0x17006c) -#define BCDSEC REGB(0x170070) -#define BCDMIN REGB(0x170074) -#define BCDHOUR REGB(0x170078) -#define BCDDAY REGB(0x17007c) -#define BCDDATE REGB(0x170080) -#define BCDMON REGB(0x170084) -#define BCDYEAR REGB(0x170088) -#define TICINT REGB(0x17008c) - -/*********************************/ -/* Clock & Power Registers */ -/*********************************/ - -#define PLLCON REGL(0x180000) -#define CLKCON REGL(0x180004) -#define CLKSLOW REGL(0x180008) -#define LOCKTIME REGL(0x18000c) - -/**************************************/ -/* Interrupt Controller Registers */ -/**************************************/ - -#define INTCON REGL(0x200000) -#define INTPND REGL(0x200004) -#define INTMOD REGL(0x200008) -#define INTMSK REGL(0x20000c) -#define I_PSLV REGL(0x200010) -#define I_PMST REGL(0x200014) -#define I_CSLV REGL(0x200018) -#define I_CMST REGL(0x20001c) -#define I_ISPR REGL(0x200020) -#define I_ISPC REGL(0x200024) -#define F_ISPR REGL(0x200038) -#define F_ISPC REGL(0x20003c) - -/********************************/ -/* LCD Controller Registers */ -/********************************/ - -#define LCDCON1 REGL(0x300000) -#define LCDCON2 REGL(0x300004) -#define LCDSADDR1 REGL(0x300008) -#define LCDSADDR2 REGL(0x30000c) -#define LCDSADDR3 REGL(0x300010) -#define REDLUT REGL(0x300014) -#define GREENLUT REGL(0x300018) -#define BLUELUT REGL(0x30001c) -#define DP1_2 REGL(0x300020) -#define DP4_7 REGL(0x300024) -#define DP3_5 REGL(0x300028) -#define DP2_3 REGL(0x30002c) -#define DP5_7 REGL(0x300030) -#define DP3_4 REGL(0x300034) -#define DP4_5 REGL(0x300038) -#define DP6_7 REGL(0x30003c) -#define LCDCON3 REGL(0x300040) -#define DITHMODE REGL(0x300044) - -/*********************/ -/* DMA Registers */ -/*********************/ - -#define ZDCON0 REGL(0x280000) -#define ZDISRC0 REGL(0x280004) -#define ZDIDES0 REGL(0x280008) -#define ZDICNT0 REGL(0x28000c) -#define ZDCSRC0 REGL(0x280010) -#define ZDCDES0 REGL(0x280014) -#define ZDCCNT0 REGL(0x280018) - -#define ZDCON1 REGL(0x280020) -#define ZDISRC1 REGL(0x280024) -#define ZDIDES1 REGL(0x280028) -#define ZDICNT1 REGL(0x28002c) -#define ZDCSRC1 REGL(0x280030) -#define ZDCDES1 REGL(0x280034) -#define ZDCCNT1 REGL(0x280038) - -#define BDCON0 REGL(0x380000) -#define BDISRC0 REGL(0x380004) -#define BDIDES0 REGL(0x380008) -#define BDICNT0 REGL(0x38000c) -#define BDCSRC0 REGL(0x380010) -#define BDCDES0 REGL(0x380014) -#define BDCCNT0 REGL(0x380018) - -#define BDCON1 REGL(0x380020) -#define BDISRC1 REGL(0x380024) -#define BDIDES1 REGL(0x380028) -#define BDICNT1 REGL(0x38002c) -#define BDCSRC1 REGL(0x380030) -#define BDCDES1 REGL(0x380034) -#define BDCCNT1 REGL(0x380038) - - -#define CLEAR_PEND_INT(n) I_ISPC = (1<<(n)) -#define INT_ENABLE(n) INTMSK &= ~(1<<(n)) -#define INT_DISABLE(n) INTMSK |= (1<<(n)) - -#define HARD_RESET_NOW() - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 009863b..55a4e26 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -16,7 +16,7 @@ enum dma_data_direction { static void *dma_alloc_coherent(size_t len, unsigned long *handle) { - *handle = (unsigned long)malloc(len); + *handle = (unsigned long)memalign(ARCH_DMA_MINALIGN, len); return (void *)*handle; } diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 79a9597..e126436 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -47,6 +47,6 @@ struct arch_global_data { #include <asm-generic/global_data.h> -#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8") +#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r9") #endif /* __ASM_GBL_DATA_H */ diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 5e2f027..61fee9f 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -310,12 +310,6 @@ struct prcm_regs { u32 prm_vc_val_bypass; u32 prm_vc_cfg_i2c_mode; u32 prm_vc_cfg_i2c_clk; - u32 prm_sldo_core_setup; - u32 prm_sldo_core_ctrl; - u32 prm_sldo_mpu_setup; - u32 prm_sldo_mpu_ctrl; - u32 prm_sldo_mm_setup; - u32 prm_sldo_mm_ctrl; u32 prm_abbldo_mpu_setup; u32 prm_abbldo_mpu_ctrl; diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index 960d12e..ac54b93 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -69,7 +69,7 @@ ENTRY(_main) bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ sub sp, #GD_SIZE /* allocate one GD above SP */ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - mov r8, sp /* GD is above SP */ + mov r9, sp /* GD is above SP */ mov r0, #0 bl board_init_f @@ -81,15 +81,15 @@ ENTRY(_main) * 'here' but relocated. */ - ldr sp, [r8, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */ + ldr sp, [r9, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r8, [r8, #GD_BD] /* r8 = gd->bd */ - sub r8, r8, #GD_SIZE /* new GD is below bd */ + ldr r9, [r9, #GD_BD] /* r9 = gd->bd */ + sub r9, r9, #GD_SIZE /* new GD is below bd */ adr lr, here - ldr r0, [r8, #GD_RELOC_OFF] /* r0 = gd->reloc_off */ + ldr r0, [r9, #GD_RELOC_OFF] /* r0 = gd->reloc_off */ add lr, lr, r0 - ldr r0, [r8, #GD_RELOCADDR] /* r0 = gd->relocaddr */ + ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */ b relocate_code here: @@ -111,8 +111,8 @@ clbss_l:cmp r0, r1 /* while not at end of BSS */ bl red_led_on /* call board_init_r(gd_t *id, ulong dest_addr) */ - mov r0, r8 /* gd_t */ - ldr r1, [r8, #GD_RELOCADDR] /* dest_addr */ + mov r0, r9 /* gd_t */ + ldr r1, [r9, #GD_RELOCADDR] /* dest_addr */ /* call board_init_r */ ldr pc, =board_init_r /* this is auto-relocated! */ diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S index ab90430..a62a556 100644 --- a/arch/arm/lib/relocate.S +++ b/arch/arm/lib/relocate.S @@ -22,7 +22,7 @@ ENTRY(relocate_code) ldr r1, =__image_copy_start /* r1 <- SRC &__image_copy_start */ - subs r9, r0, r1 /* r9 <- relocation offset */ + subs r4, r0, r1 /* r4 <- relocation offset */ beq relocate_done /* skip relocation */ ldr r2, =__image_copy_end /* r2 <- SRC &__image_copy_end */ @@ -44,9 +44,9 @@ fixloop: bne fixnext /* relative fix: increase location by offset */ - add r0, r0, r9 + add r0, r0, r4 ldr r1, [r0] - add r1, r1, r9 + add r1, r1, r4 str r1, [r0] fixnext: cmp r2, r3 diff --git a/arch/arm/lib/spl.c b/arch/arm/lib/spl.c index 26d0be4..dfcc596 100644 --- a/arch/arm/lib/spl.c +++ b/arch/arm/lib/spl.c @@ -25,9 +25,6 @@ gd_t gdata __attribute__ ((section(".data"))); */ void __weak board_init_f(ulong dummy) { - /* Set the stack pointer. */ - asm volatile("mov sp, %0\n" : : "r"(CONFIG_SPL_STACK)); - /* Clear the BSS. */ memset(__bss_start, 0, __bss_end - __bss_start); |