diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/mach-rmobile/Kconfig | 5 | ||||
-rw-r--r-- | arch/arm/mach-rmobile/Kconfig.64 | 12 | ||||
-rw-r--r-- | arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h | 100 | ||||
-rw-r--r-- | arch/arm/mach-rmobile/lowlevel_init_gen3.S | 76 |
4 files changed, 193 insertions, 0 deletions
diff --git a/arch/arm/mach-rmobile/Kconfig b/arch/arm/mach-rmobile/Kconfig index 56c3f68..4b05d78 100644 --- a/arch/arm/mach-rmobile/Kconfig +++ b/arch/arm/mach-rmobile/Kconfig @@ -8,8 +8,13 @@ config RCAR_32 bool "Renesas ARM SoCs R-Car Gen1/Gen2 (32bit)" select CPU_V7 +config RCAR_GEN3 + bool "Renesas ARM SoCs R-Car Gen3 (64bit)" + select ARM64 + endchoice source "arch/arm/mach-rmobile/Kconfig.32" +source "arch/arm/mach-rmobile/Kconfig.64" endif diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64 new file mode 100644 index 0000000..af1a76a --- /dev/null +++ b/arch/arm/mach-rmobile/Kconfig.64 @@ -0,0 +1,12 @@ +if RCAR_GEN3 + +choice + prompt "Renesus ARM64 SoCs board select" + optional + +endchoice + +config SYS_SOC + default "rmobile" + +endif diff --git a/arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h b/arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h new file mode 100644 index 0000000..fbd87c4 --- /dev/null +++ b/arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h @@ -0,0 +1,100 @@ +/* + * ./arch/arm/mach-rmobile/include/mach/rcar-gen3-base.h + * + * Copyright (C) 2015 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_RCAR_GEN3_BASE_H +#define __ASM_ARCH_RCAR_GEN3_BASE_H + +/* + * R-Car (R8A7750) I/O Addresses + */ +#define RWDT_BASE 0xE6020000 +#define SWDT_BASE 0xE6030000 +#define LBSC_BASE 0xEE220200 +#define TMU_BASE 0xE61E0000 +#define GPIO5_BASE 0xE6055000 + +/* SCIF */ +#define SCIF0_BASE 0xE6E60000 +#define SCIF1_BASE 0xE6E68000 +#define SCIF2_BASE 0xE6E88000 +#define SCIF3_BASE 0xE6C50000 +#define SCIF4_BASE 0xE6C40000 +#define SCIF5_BASE 0xE6F30000 + +/* Module stop status register */ +#define MSTPSR0 0xE6150030 +#define MSTPSR1 0xE6150038 +#define MSTPSR2 0xE6150040 +#define MSTPSR3 0xE6150048 +#define MSTPSR4 0xE615004C +#define MSTPSR5 0xE615003C +#define MSTPSR6 0xE61501C0 +#define MSTPSR7 0xE61501C4 +#define MSTPSR8 0xE61509A0 +#define MSTPSR9 0xE61509A4 +#define MSTPSR10 0xE61509A8 +#define MSTPSR11 0xE61509AC + +/* Realtime module stop control register */ +#define RMSTPCR0 0xE6150110 +#define RMSTPCR1 0xE6150114 +#define RMSTPCR2 0xE6150118 +#define RMSTPCR3 0xE615011C +#define RMSTPCR4 0xE6150120 +#define RMSTPCR5 0xE6150124 +#define RMSTPCR6 0xE6150128 +#define RMSTPCR7 0xE615012C +#define RMSTPCR8 0xE6150980 +#define RMSTPCR9 0xE6150984 +#define RMSTPCR10 0xE6150988 +#define RMSTPCR11 0xE615098C + +/* System module stop control register */ +#define SMSTPCR0 0xE6150130 +#define SMSTPCR1 0xE6150134 +#define SMSTPCR2 0xE6150138 +#define SMSTPCR3 0xE615013C +#define SMSTPCR4 0xE6150140 +#define SMSTPCR5 0xE6150144 +#define SMSTPCR6 0xE6150148 +#define SMSTPCR7 0xE615014C +#define SMSTPCR8 0xE6150990 +#define SMSTPCR9 0xE6150994 +#define SMSTPCR10 0xE6150998 +#define SMSTPCR11 0xE615099C + +/* SDHI */ +#define CONFIG_SYS_SH_SDHI0_BASE 0xEE100000 +#define CONFIG_SYS_SH_SDHI1_BASE 0xEE120000 +#define CONFIG_SYS_SH_SDHI2_BASE 0xEE140000 +#define CONFIG_SYS_SH_SDHI3_BASE 0xEE160000 + +/* PFC */ +#define PFC_PUEN6 0xE6060418 +#define PUEN_USB1_OVC (1 << 2) +#define PUEN_USB1_PWEN (1 << 1) + +#ifndef __ASSEMBLY__ +#include <asm/types.h> + +/* RWDT */ +struct rcar_rwdt { + u32 rwtcnt; + u32 rwtcsra; + u32 rwtcsrb; +}; + +/* SWDT */ +struct rcar_swdt { + u32 swtcnt; + u32 swtcsra; + u32 swtcsrb; +}; +#endif + +#endif /* __ASM_ARCH_RCAR_GEN3_BASE_H */ diff --git a/arch/arm/mach-rmobile/lowlevel_init_gen3.S b/arch/arm/mach-rmobile/lowlevel_init_gen3.S new file mode 100644 index 0000000..88ff56e --- /dev/null +++ b/arch/arm/mach-rmobile/lowlevel_init_gen3.S @@ -0,0 +1,76 @@ +/* + * arch/arm/cpu/armv8/rcar_gen3/lowlevel_init.S + * This file is lowlevel initialize routine. + * + * (C) Copyright 2015 Renesas Electronics Corporation + * + * This file is based on the arch/arm/cpu/armv8/start.S + * + * (C) Copyright 2013 + * David Feng <fenghua@phytium.com.cn> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm-offsets.h> +#include <config.h> +#include <linux/linkage.h> +#include <asm/macro.h> + +ENTRY(lowlevel_init) + mov x29, lr /* Save LR */ + +#ifndef CONFIG_ARMV8_MULTIENTRY + /* + * For single-entry systems the lowlevel init is very simple. + */ + ldr x0, =GICD_BASE + bl gic_init_secure + +#else /* CONFIG_ARMV8_MULTIENTRY is set */ + +#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3) + branch_if_slave x0, 1f + ldr x0, =GICD_BASE + bl gic_init_secure +1: +#if defined(CONFIG_GICV3) + ldr x0, =GICR_BASE + bl gic_init_secure_percpu +#elif defined(CONFIG_GICV2) + ldr x0, =GICD_BASE + ldr x1, =GICC_BASE + bl gic_init_secure_percpu +#endif +#endif + + branch_if_master x0, x1, 2f + + /* + * Slave should wait for master clearing spin table. + * This sync prevent salves observing incorrect + * value of spin table and jumping to wrong place. + */ +#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3) +#ifdef CONFIG_GICV2 + ldr x0, =GICC_BASE +#endif + bl gic_wait_for_interrupt +#endif + + /* + * All slaves will enter EL2 and optionally EL1. + */ + bl armv8_switch_to_el2 +#ifdef CONFIG_ARMV8_SWITCH_TO_EL1 + bl armv8_switch_to_el1 +#endif + +#endif /* CONFIG_ARMV8_MULTIENTRY */ + + bl s_init + +2: + mov lr, x29 /* Restore LR */ + ret +ENDPROC(lowlevel_init) |