diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/cpu/armv7/omap3/sdrc.c | 28 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-omap3/mem.h | 26 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-omap3/sys_proto.h | 2 |
3 files changed, 17 insertions, 39 deletions
diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c index 2756024..a27b4b1 100644 --- a/arch/arm/cpu/armv7/omap3/sdrc.c +++ b/arch/arm/cpu/armv7/omap3/sdrc.c @@ -148,6 +148,18 @@ void do_sdrc_init(u32 cs, u32 early) sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE; + /* + * When called in the early context this may be SPL and we will + * need to set all of the timings. This ends up being board + * specific so we call a helper function to take care of this + * for us. Otherwise, to be safe, we need to copy the settings + * from the first bank to the second. We will setup CS0, + * then set cs_cfg to the appropriate value then try and + * setup CS1. + */ +#ifdef CONFIG_SPL_BUILD + get_board_mem_timings(&mcfg, &ctrla, &ctrlb, &rfr_ctrl, &mr); +#endif if (early) { /* reset sdrc controller */ writel(SOFTRESET, &sdrc_base->sysconfig); @@ -164,22 +176,12 @@ void do_sdrc_init(u32 cs, u32 early) writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl); sdelay(0x20000); -/* As long as V_MCFG and V_RFR_CTRL is not defined for all OMAP3 boards we need - * to prevent this to be build in non-SPL build */ #ifdef CONFIG_SPL_BUILD - /* - * If we use a SPL there is no x-loader nor config header so - * we have to do the job ourselfs - */ - - mcfg = V_MCFG; - ctrla = V_ACTIMA_165; - ctrlb = V_ACTIMB_165; - rfr_ctrl = V_RFR_CTRL; - mr = V_MR; - write_sdrc_timings(CS0, sdrc_actim_base0, mcfg, ctrla, ctrlb, rfr_ctrl, mr); + make_cs1_contiguous(); + write_sdrc_timings(CS0, sdrc_actim_base1, mcfg, ctrla, ctrlb, + rfr_ctrl, mr); #endif } diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h index 4f996d9..09f5872 100644 --- a/arch/arm/include/asm/arch-omap3/mem.h +++ b/arch/arm/include/asm/arch-omap3/mem.h @@ -212,32 +212,6 @@ enum { ACTIM_CTRLB(NUMONYX_TWTR_165, NUMONYX_TCKE_165, \ NUMONYX_TXP_165, NUMONYX_XSR_165) -#ifdef CONFIG_OMAP3_INFINEON_DDR -#define V_ACTIMA_165 INFINEON_V_ACTIMA_165 -#define V_ACTIMB_165 INFINEON_V_ACTIMB_165 -#endif - -#ifdef CONFIG_OMAP3_MICRON_DDR -#define V_ACTIMA_165 MICRON_V_ACTIMA_165 -#define V_ACTIMB_165 MICRON_V_ACTIMB_165 -#define V_MCFG MICRON_V_MCFG_165(PHYS_SDRAM_1_SIZE) -#define V_RFR_CTRL SDP_3430_SDRC_RFR_CTRL_165MHz -#define V_MR MICRON_V_MR_165 -#endif - -#ifdef CONFIG_OMAP3_NUMONYX_DDR -#define V_ACTIMA_165 NUMONYX_V_ACTIMA_165 -#define V_ACTIMB_165 NUMONYX_V_ACTIMB_165 -#endif - -#if !defined(V_ACTIMA_165) || !defined(V_ACTIMB_165) -#error "Please choose the right DDR type in config header" -#endif - -#if defined(CONFIG_SPL_BUILD) && (!defined(V_MCFG) || !defined(V_RFR_CTRL)) -#error "Please choose the right DDR type in config header" -#endif - /* * GPMC settings - * Definitions is as per the following format diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index 9e64410..80e167b 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -38,6 +38,8 @@ void per_clocks_enable(void); void memif_init(void); void sdrc_init(void); void do_sdrc_init(u32, u32); +void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, + u32 *mr); void emif4_init(void); void gpmc_init(void); void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, |