diff options
Diffstat (limited to 'arch/arm')
35 files changed, 1342 insertions, 727 deletions
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 5d3b4c2..a067b8a 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -165,13 +165,7 @@ next: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -188,14 +182,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -245,7 +235,15 @@ fixnext: add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop - b clear_bss + bx lr + +#endif + +relocate_done: + + bx lr + +#ifndef CONFIG_SPL_BUILD _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -253,54 +251,13 @@ _rel_dyn_end_ofs: .word __rel_dyn_end - _start _dynsym_start_ofs: .word __dynsym_start - _start -#endif -clear_bss: -#ifdef CONFIG_SPL_BUILD - /* No relocation for SPL */ - ldr r0, =__bss_start - ldr r1, =__bss_end__ -#else - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 #endif - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr r0, _nand_boot_ofs - mov pc, r0 + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: -_nand_boot_ofs: - .word nand_boot -#else -jump_2_ram: - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -#endif + bx lr /* ************************************************************************* diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 667a0e0..40df4b1 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -224,12 +224,7 @@ skip_tcmdisable: */ bl lowlevel_init /* go setup pll,mux,memory */ -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -246,14 +241,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -343,49 +334,9 @@ mmu_enable: skip_hw_init: #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -#ifndef CONFIG_NAND_SPL - bl coloured_LED_init - bl red_led_on -#endif -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr pc, _nand_boot - -_nand_boot: .word nand_boot -#else - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -#endif + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -399,6 +350,11 @@ _mmu_table_base: .word mmu_table #endif + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + #ifndef CONFIG_NAND_SPL /* * we assume that cache operation is done before. (eg. cleanup_before_linux()) diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index c2a7763..771d386 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -147,12 +147,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -169,14 +164,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -228,43 +219,10 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ mov pc, lr -_board_init_r_ofs: - .word board_init_r - _start - _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: @@ -272,6 +230,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 14c9156..511d21d 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -182,12 +182,7 @@ copyex: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -204,14 +199,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -263,51 +254,10 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr r0, _nand_boot_ofs - mov pc, r0 +relocate_done: -_nand_boot_ofs: - .word nand_boot -#else - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ mov pc, lr -_board_init_r_ofs: - .word board_init_r - _start -#endif - _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: @@ -315,6 +265,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index 3a483f6..e8d6d71 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -34,10 +34,6 @@ #include <config.h> #include <version.h> -#if defined(CONFIG_OMAP1510) -#include <./configs/omap1510.h> -#endif - /* ************************************************************************* * @@ -176,12 +172,7 @@ poll1: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -198,14 +189,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -257,51 +244,10 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr r0, _nand_boot_ofs - mov pc, r0 +relocate_done: -_nand_boot_ofs: - .word nand_boot -#else - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ mov pc, lr -_board_init_r_ofs: - .word board_init_r - _start -#endif - _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: @@ -309,6 +255,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c index 9348552..0448c0b 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c @@ -193,6 +193,19 @@ void at91_spi1_hw_init(unsigned long cs_mask) } #endif +#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI) +void at91_uhp_hw_init(void) +{ + /* Enable VBus on UHP ports */ + at91_set_pio_output(AT91_PIO_PORTD, 18, 0); /* port A */ + at91_set_pio_output(AT91_PIO_PORTD, 19, 0); /* port B */ +#if defined(CONFIG_USB_OHCI_NEW) + /* port C is OHCI only */ + at91_set_pio_output(AT91_PIO_PORTD, 20, 0); /* port C */ +#endif +} +#endif + #ifdef CONFIG_MACB void at91_macb_hw_init(void) { diff --git a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c b/arch/arm/cpu/arm926ejs/kirkwood/mpp.c index 03eb2de..0ba6f09 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/mpp.c @@ -31,7 +31,7 @@ static u32 kirkwood_variant(void) #define MPP_CTRL(i) (KW_MPP_BASE + (i* 4)) #define MPP_NR_REGS (1 + MPP_MAX/8) -void kirkwood_mpp_conf(u32 *mpp_list, u32 *mpp_save) +void kirkwood_mpp_conf(const u32 *mpp_list, u32 *mpp_save) { u32 mpp_ctrl[MPP_NR_REGS]; unsigned int variant_mask; diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 2188f7e..66a8b65 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -36,12 +36,6 @@ #include <common.h> #include <version.h> -#if defined(CONFIG_OMAP1610) -#include <./configs/omap1510.h> -#elif defined(CONFIG_OMAP730) -#include <./configs/omap730.h> -#endif - /* ************************************************************************* * @@ -198,20 +192,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: -#ifdef CONFIG_NAND_SPL /* deprecated, use instead CONFIG_SPL_BUILD */ - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) -#else -#ifdef CONFIG_SPL_BUILD - ldr sp, =(CONFIG_SPL_STACK) -#else - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) -#endif -#endif - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -229,15 +210,11 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start sub r9, r6, r0 /* r9 <- relocation offset */ cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + moveq r9, #0 /* no relocation. offset(r9) = 0 */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -289,56 +266,9 @@ fixnext: blo fixloop #endif -clear_bss: -#ifdef CONFIG_SPL_BUILD - /* No relocation for SPL */ - ldr r0, =__bss_start - ldr r1, =__bss_end__ -#else - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 -#endif - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - -#ifndef CONFIG_SPL_BUILD - bl coloured_LED_init - bl red_led_on -#endif - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr r0, _nand_boot_ofs - mov pc, r0 +relocate_done: -_nand_boot_ofs: - .word nand_boot -#else - ldr r0, _board_init_r_ofs - ldr r1, _TEXT_BASE - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -#endif + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -346,8 +276,14 @@ _rel_dyn_end_ofs: .word __rel_dyn_end - _start _dynsym_start_ofs: .word __dynsym_start - _start + #endif + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + bx lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 30e2183..a7a98a4 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -147,12 +147,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -169,14 +164,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -228,46 +219,10 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -#endif - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr pc, _nand_boot +relocate_done: -_nand_boot: .word nand_boot -#else - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ mov pc, lr -_board_init_r_ofs: - .word board_init_r - _start -#endif - _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: @@ -275,6 +230,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index a133d19..c189849 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -143,12 +143,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -165,14 +160,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -224,50 +215,9 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr r0, _nand_boot_ofs - mov pc, r0 - -_nand_boot_ofs: - .word nand_boot -#else - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -#endif + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -276,6 +226,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index 7459979..956427c 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -112,6 +112,36 @@ static unsigned long exynos4_get_pll_clk(int pllreg) return exynos_get_pll_clk(pllreg, r, k); } +/* exynos4x12: return pll clock frequency */ +static unsigned long exynos4x12_get_pll_clk(int pllreg) +{ + struct exynos4x12_clock *clk = + (struct exynos4x12_clock *)samsung_get_base_clock(); + unsigned long r, k = 0; + + switch (pllreg) { + case APLL: + r = readl(&clk->apll_con0); + break; + case MPLL: + r = readl(&clk->mpll_con0); + break; + case EPLL: + r = readl(&clk->epll_con0); + k = readl(&clk->epll_con1); + break; + case VPLL: + r = readl(&clk->vpll_con0); + k = readl(&clk->vpll_con1); + break; + default: + printf("Unsupported PLL (%d)\n", pllreg); + return 0; + } + + return exynos_get_pll_clk(pllreg, r, k); +} + /* exynos5: return pll clock frequency */ static unsigned long exynos5_get_pll_clk(int pllreg) { @@ -193,6 +223,28 @@ static unsigned long exynos4_get_arm_clk(void) return armclk; } +/* exynos4x12: return ARM clock frequency */ +static unsigned long exynos4x12_get_arm_clk(void) +{ + struct exynos4x12_clock *clk = + (struct exynos4x12_clock *)samsung_get_base_clock(); + unsigned long div; + unsigned long armclk; + unsigned int core_ratio; + unsigned int core2_ratio; + + div = readl(&clk->div_cpu0); + + /* CORE_RATIO: [2:0], CORE2_RATIO: [30:28] */ + core_ratio = (div >> 0) & 0x7; + core2_ratio = (div >> 28) & 0x7; + + armclk = get_pll_clk(APLL) / (core_ratio + 1); + armclk /= (core2_ratio + 1); + + return armclk; +} + /* exynos5: return ARM clock frequency */ static unsigned long exynos5_get_arm_clk(void) { @@ -258,6 +310,20 @@ static unsigned long exynos4_get_pwm_clk(void) return pclk; } +/* exynos4x12: return pwm clock frequency */ +static unsigned long exynos4x12_get_pwm_clk(void) +{ + unsigned long pclk, sclk; + unsigned int ratio; + + sclk = get_pll_clk(MPLL); + ratio = 8; + + pclk = sclk / (ratio + 1); + + return pclk; +} + /* exynos5: return pwm clock frequency */ static unsigned long exynos5_get_pwm_clk(void) { @@ -326,6 +392,51 @@ static unsigned long exynos4_get_uart_clk(int dev_index) return uclk; } +/* exynos4x12: return uart clock frequency */ +static unsigned long exynos4x12_get_uart_clk(int dev_index) +{ + struct exynos4x12_clock *clk = + (struct exynos4x12_clock *)samsung_get_base_clock(); + unsigned long uclk, sclk; + unsigned int sel; + unsigned int ratio; + + /* + * CLK_SRC_PERIL0 + * UART0_SEL [3:0] + * UART1_SEL [7:4] + * UART2_SEL [8:11] + * UART3_SEL [12:15] + * UART4_SEL [16:19] + */ + sel = readl(&clk->src_peril0); + sel = (sel >> (dev_index << 2)) & 0xf; + + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + /* + * CLK_DIV_PERIL0 + * UART0_RATIO [3:0] + * UART1_RATIO [7:4] + * UART2_RATIO [8:11] + * UART3_RATIO [12:15] + * UART4_RATIO [16:19] + */ + ratio = readl(&clk->div_peril0); + ratio = (ratio >> (dev_index << 2)) & 0xf; + + uclk = sclk / (ratio + 1); + + return uclk; +} + /* exynos5: return uart clock frequency */ static unsigned long exynos5_get_uart_clk(int dev_index) { @@ -373,6 +484,100 @@ static unsigned long exynos5_get_uart_clk(int dev_index) return uclk; } +static unsigned long exynos4_get_mmc_clk(int dev_index) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned long uclk, sclk; + unsigned int sel, ratio, pre_ratio; + int shift; + + sel = readl(&clk->src_fsys); + sel = (sel >> (dev_index << 2)) & 0xf; + + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + switch (dev_index) { + case 0: + case 1: + ratio = readl(&clk->div_fsys1); + pre_ratio = readl(&clk->div_fsys1); + break; + case 2: + case 3: + ratio = readl(&clk->div_fsys2); + pre_ratio = readl(&clk->div_fsys2); + break; + case 4: + ratio = readl(&clk->div_fsys3); + pre_ratio = readl(&clk->div_fsys3); + break; + default: + return 0; + } + + if (dev_index == 1 || dev_index == 3) + shift = 16; + + ratio = (ratio >> shift) & 0xf; + pre_ratio = (pre_ratio >> (shift + 8)) & 0xff; + uclk = (sclk / (ratio + 1)) / (pre_ratio + 1); + + return uclk; +} + +static unsigned long exynos5_get_mmc_clk(int dev_index) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned long uclk, sclk; + unsigned int sel, ratio, pre_ratio; + int shift; + + sel = readl(&clk->src_fsys); + sel = (sel >> (dev_index << 2)) & 0xf; + + if (sel == 0x6) + sclk = get_pll_clk(MPLL); + else if (sel == 0x7) + sclk = get_pll_clk(EPLL); + else if (sel == 0x8) + sclk = get_pll_clk(VPLL); + else + return 0; + + switch (dev_index) { + case 0: + case 1: + ratio = readl(&clk->div_fsys1); + pre_ratio = readl(&clk->div_fsys1); + break; + case 2: + case 3: + ratio = readl(&clk->div_fsys2); + pre_ratio = readl(&clk->div_fsys2); + break; + default: + return 0; + } + + if (dev_index == 1 || dev_index == 3) + shift = 16; + + ratio = (ratio >> shift) & 0xf; + pre_ratio = (pre_ratio >> (shift + 8)) & 0xff; + uclk = (sclk / (ratio + 1)) / (pre_ratio + 1); + + return uclk; +} + /* exynos4: set the mmc clock */ static void exynos4_set_mmc_clk(int dev_index, unsigned int div) { @@ -386,6 +591,38 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div) * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24] * CLK_DIV_FSYS2 * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24] + * CLK_DIV_FSYS3 + * MMC4_PRE_RATIO [15:8] + */ + if (dev_index < 2) { + addr = (unsigned int)&clk->div_fsys1; + } else if (dev_index == 4) { + addr = (unsigned int)&clk->div_fsys3; + dev_index -= 4; + } else { + addr = (unsigned int)&clk->div_fsys2; + dev_index -= 2; + } + + val = readl(addr); + val &= ~(0xff << ((dev_index << 4) + 8)); + val |= (div & 0xff) << ((dev_index << 4) + 8); + writel(val, addr); +} + +/* exynos4x12: set the mmc clock */ +static void exynos4x12_set_mmc_clk(int dev_index, unsigned int div) +{ + struct exynos4x12_clock *clk = + (struct exynos4x12_clock *)samsung_get_base_clock(); + unsigned int addr; + unsigned int val; + + /* + * CLK_DIV_FSYS1 + * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24] + * CLK_DIV_FSYS2 + * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24] */ if (dev_index < 2) { addr = (unsigned int)&clk->div_fsys1; @@ -603,7 +840,7 @@ void exynos5_set_lcd_clk(void) */ cfg = readl(&clk->src_disp1_0); cfg &= ~(0xf); - cfg |= 0x8; + cfg |= 0x6; writel(cfg, &clk->src_disp1_0); /* @@ -940,16 +1177,22 @@ unsigned long get_pll_clk(int pllreg) { if (cpu_is_exynos5()) return exynos5_get_pll_clk(pllreg); - else + else { + if (proid_is_exynos4412()) + return exynos4x12_get_pll_clk(pllreg); return exynos4_get_pll_clk(pllreg); + } } unsigned long get_arm_clk(void) { if (cpu_is_exynos5()) return exynos5_get_arm_clk(); - else + else { + if (proid_is_exynos4412()) + return exynos4x12_get_arm_clk(); return exynos4_get_arm_clk(); + } } unsigned long get_i2c_clk(void) @@ -968,24 +1211,41 @@ unsigned long get_pwm_clk(void) { if (cpu_is_exynos5()) return exynos5_get_pwm_clk(); - else + else { + if (proid_is_exynos4412()) + return exynos4x12_get_pwm_clk(); return exynos4_get_pwm_clk(); + } } unsigned long get_uart_clk(int dev_index) { if (cpu_is_exynos5()) return exynos5_get_uart_clk(dev_index); - else + else { + if (proid_is_exynos4412()) + return exynos4x12_get_uart_clk(dev_index); return exynos4_get_uart_clk(dev_index); + } +} + +unsigned long get_mmc_clk(int dev_index) +{ + if (cpu_is_exynos5()) + return exynos5_get_mmc_clk(dev_index); + else + return exynos4_get_mmc_clk(dev_index); } void set_mmc_clk(int dev_index, unsigned int div) { if (cpu_is_exynos5()) exynos5_set_mmc_clk(dev_index, div); - else + else { + if (proid_is_exynos4412()) + exynos4x12_set_mmc_clk(dev_index, div); exynos4_set_mmc_clk(dev_index, div); + } } unsigned long get_lcd_clk(void) diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index 20a4b84..bd499b4 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -22,6 +22,7 @@ */ #include <common.h> +#include <fdtdec.h> #include <asm/arch/gpio.h> #include <asm/arch/pinmux.h> #include <asm/arch/sromc.h> @@ -370,6 +371,43 @@ static void exynos4_i2c_config(int peripheral, int flags) } } +static int exynos4_mmc_config(int peripheral, int flags) +{ + struct exynos4_gpio_part2 *gpio2 = + (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); + struct s5p_gpio_bank *bank, *bank_ext; + int i; + + switch (peripheral) { + case PERIPH_ID_SDMMC0: + bank = &gpio2->k0; + bank_ext = &gpio2->k1; + break; + case PERIPH_ID_SDMMC2: + bank = &gpio2->k2; + bank_ext = &gpio2->k3; + break; + default: + return -1; + } + for (i = 0; i < 7; i++) { + if (i == 2) + continue; + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); + s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); + s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); + } + if (flags & PINMUX_FLAG_8BIT_MODE) { + for (i = 3; i < 7; i++) { + s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3)); + s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_NONE); + s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X); + } + } + + return 0; +} + static int exynos4_pinmux_config(int peripheral, int flags) { switch (peripheral) { @@ -383,6 +421,14 @@ static int exynos4_pinmux_config(int peripheral, int flags) case PERIPH_ID_I2C7: exynos4_i2c_config(peripheral, flags); break; + case PERIPH_ID_SDMMC0: + case PERIPH_ID_SDMMC2: + return exynos4_mmc_config(peripheral, flags); + case PERIPH_ID_SDMMC1: + case PERIPH_ID_SDMMC3: + case PERIPH_ID_SDMMC4: + printf("SDMMC device %d not implemented\n", peripheral); + return -1; default: debug("%s: invalid peripheral %d", __func__, peripheral); return -1; @@ -402,3 +448,31 @@ int exynos_pinmux_config(int peripheral, int flags) return -1; } } + +#ifdef CONFIG_OF_CONTROL +static int exynos5_pinmux_decode_periph_id(const void *blob, int node) +{ + int err; + u32 cell[3]; + + err = fdtdec_get_int_array(blob, node, "interrupts", cell, + ARRAY_SIZE(cell)); + if (err) + return PERIPH_ID_NONE; + + /* check for invalid peripheral id */ + if ((PERIPH_ID_SDMMC4 > cell[1]) || (cell[1] < PERIPH_ID_UART0)) + return cell[1]; + + debug(" invalid peripheral id\n"); + return PERIPH_ID_NONE; +} + +int pinmux_decode_periph_id(const void *blob, int node) +{ + if (cpu_is_exynos5()) + return exynos5_pinmux_decode_periph_id(blob, node); + else + return PERIPH_ID_NONE; +} +#endif diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 7df97c5..dcc1f83 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -155,12 +155,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -177,14 +172,10 @@ ENTRY(relocate_code) mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -233,34 +224,22 @@ fixnext: add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop - b clear_bss + +relocate_done: + + bx lr + _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: .word __rel_dyn_end - _start _dynsym_start_ofs: .word __dynsym_start - _start +ENDPROC(relocate_code) -clear_bss: - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: +#endif -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -jump_2_ram: +ENTRY(c_runtime_cpu_setup) /* * If I-cache is enabled invalidate it */ @@ -279,20 +258,9 @@ jump_2_ram: mcr p15, 0, r0, c12, c0, 0 @Set VBAR #endif /* !Tegra20 */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -ENDPROC(relocate_code) -#endif + bx lr + +ENDPROC(c_runtime_cpu_setup) /************************************************************************* * diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index c12f1a7..efb5a40 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -245,12 +245,7 @@ reset: orr r0,r0,#0x13 msr cpsr,r0 -/* Set initial stackpointer in SDRAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -267,14 +262,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -326,42 +317,9 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -370,6 +328,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + bx lr + /****************************************************************************/ /* */ /* Interrupt handling */ diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 536cf5c..72af869 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -164,12 +164,7 @@ reset: bl lock_cache_for_stack #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0, =0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ #ifndef CONFIG_SPL_BUILD @@ -186,10 +181,6 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - /* Disable the Dcache RAM lock for stack now */ #ifdef CONFIG_CPU_PXA25X bl cpu_init_crit @@ -198,7 +189,7 @@ stack_setup: adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -250,48 +241,9 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -#endif /* #ifndef CONFIG_SPL_BUILD */ +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_ONENAND_SPL - ldr r0, _onenand_boot_ofs - mov pc, r0 - -_onenand_boot_ofs: - .word onenand_boot -#else -jump_2_ram: - ldr r0, _board_init_r_ofs - ldr r1, _TEXT_BASE - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -#endif + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -299,7 +251,14 @@ _rel_dyn_end_ofs: .word __rel_dyn_end - _start _dynsym_start_ofs: .word __dynsym_start - _start + #endif + + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + bx lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index 323b923..4528c91 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -128,12 +128,7 @@ reset: bl lowlevel_init #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -150,14 +145,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -209,42 +200,9 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -253,6 +211,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + bx lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 1ea92d1..3144299 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -132,12 +132,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -154,14 +149,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -213,40 +204,10 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ mov pc, lr -_board_init_r_ofs: - .word board_init_r - _start - _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: @@ -254,6 +215,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi new file mode 100644 index 0000000..ed8c8dd --- /dev/null +++ b/arch/arm/dts/exynos5250.dtsi @@ -0,0 +1,154 @@ +/* + * SAMSUNG EXYNOS5250 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file. + * EXYNOS5250 based board files can include this file and provide + * values for board specfic bindings. + * + * Note: This file does not include device nodes for all the controllers in + * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases, + * additional nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "skeleton.dtsi" + +/ { + compatible = "samsung,exynos5250"; + + sromc@12250000 { + compatible = "samsung,exynos-sromc"; + reg = <0x12250000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@12c60000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C60000 0x100>; + interrupts = <0 56 0>; + }; + + i2c@12c70000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C70000 0x100>; + interrupts = <0 57 0>; + }; + + i2c@12c80000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C80000 0x100>; + interrupts = <0 58 0>; + }; + + i2c@12c90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C90000 0x100>; + interrupts = <0 59 0>; + }; + + i2c@12ca0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CA0000 0x100>; + interrupts = <0 60 0>; + }; + + i2c@12cb0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CB0000 0x100>; + interrupts = <0 61 0>; + }; + + i2c@12cc0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CC0000 0x100>; + interrupts = <0 62 0>; + }; + + i2c@12cd0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CD0000 0x100>; + interrupts = <0 63 0>; + }; + + sound@12d60000 { + compatible = "samsung,exynos-sound"; + reg = <0x12d60000 0x20>; + }; + + spi@12d20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos-spi"; + reg = <0x12d20000 0x30>; + interrupts = <0 68 0>; + }; + + spi@12d30000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos-spi"; + reg = <0x12d30000 0x30>; + interrupts = <0 69 0>; + }; + + spi@12d40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos-spi"; + reg = <0x12d40000 0x30>; + clock-frequency = <50000000>; + interrupts = <0 70 0>; + }; + + spi@131a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos-spi"; + reg = <0x131a0000 0x30>; + interrupts = <0 129 0>; + }; + + spi@131b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos-spi"; + reg = <0x131b0000 0x30>; + interrupts = <0 130 0>; + }; + + ehci@12110000 { + compatible = "samsung,exynos-ehci"; + reg = <0x12110000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + phy { + compatible = "samsung,exynos-usb-phy"; + reg = <0x12130000 0x100>; + }; + }; + +}; diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h index 0e728c9..de0f1b1 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9x5.h +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h @@ -154,6 +154,8 @@ #define ATMEL_PIO_PORTS 4 #define CPU_HAS_PIO3 #define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */ +#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP +#define ATMEL_ID_UHP ATMEL_ID_UHPHS /* * at91sam9x5 specific prototypes diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h index cd12323..1935b0b 100644 --- a/arch/arm/include/asm/arch-exynos/clk.h +++ b/arch/arm/include/asm/arch-exynos/clk.h @@ -34,6 +34,7 @@ unsigned long get_arm_clk(void); unsigned long get_i2c_clk(void); unsigned long get_pwm_clk(void); unsigned long get_uart_clk(int dev_index); +unsigned long get_mmc_clk(int dev_index); void set_mmc_clk(int dev_index, unsigned int div); unsigned long get_lcd_clk(void); void set_lcd_clk(void); diff --git a/arch/arm/include/asm/arch-exynos/clock.h b/arch/arm/include/asm/arch-exynos/clock.h index ff6781a..9b56b4e 100644 --- a/arch/arm/include/asm/arch-exynos/clock.h +++ b/arch/arm/include/asm/arch-exynos/clock.h @@ -251,6 +251,282 @@ struct exynos4_clock { unsigned int div_iem_l1; }; +struct exynos4x12_clock { + unsigned char res1[0x4200]; + unsigned int src_leftbus; + unsigned char res2[0x1fc]; + unsigned int mux_stat_leftbus; + unsigned char res3[0xfc]; + unsigned int div_leftbus; + unsigned char res4[0xfc]; + unsigned int div_stat_leftbus; + unsigned char res5[0x1fc]; + unsigned int gate_ip_leftbus; + unsigned char res6[0x12c]; + unsigned int gate_ip_image; + unsigned char res7[0xcc]; + unsigned int clkout_leftbus; + unsigned int clkout_leftbus_div_stat; + unsigned char res8[0x37f8]; + unsigned int src_rightbus; + unsigned char res9[0x1fc]; + unsigned int mux_stat_rightbus; + unsigned char res10[0xfc]; + unsigned int div_rightbus; + unsigned char res11[0xfc]; + unsigned int div_stat_rightbus; + unsigned char res12[0x1fc]; + unsigned int gate_ip_rightbus; + unsigned char res13[0x15c]; + unsigned int gate_ip_perir; + unsigned char res14[0x9c]; + unsigned int clkout_rightbus; + unsigned int clkout_rightbus_div_stat; + unsigned char res15[0x3608]; + unsigned int epll_lock; + unsigned char res16[0xc]; + unsigned int vpll_lock; + unsigned char res17[0xec]; + unsigned int epll_con0; + unsigned int epll_con1; + unsigned int epll_con2; + unsigned char res18[0x4]; + unsigned int vpll_con0; + unsigned int vpll_con1; + unsigned int vpll_con2; + unsigned char res19[0xe4]; + unsigned int src_top0; + unsigned int src_top1; + unsigned char res20[0x8]; + unsigned int src_cam; + unsigned int src_tv; + unsigned int src_mfc; + unsigned int src_g3d; + unsigned char res21[0x4]; + unsigned int src_lcd; + unsigned int src_isp; + unsigned int src_maudio; + unsigned int src_fsys; + unsigned char res22[0xc]; + unsigned int src_peril0; + unsigned int src_peril1; + unsigned int src_cam1; + unsigned char res23[0xb4]; + unsigned int src_mask_top; + unsigned char res24[0xc]; + unsigned int src_mask_cam; + unsigned int src_mask_tv; + unsigned char res25[0xc]; + unsigned int src_mask_lcd; + unsigned int src_mask_isp; + unsigned int src_mask_maudio; + unsigned int src_mask_fsys; + unsigned char res26[0xc]; + unsigned int src_mask_peril0; + unsigned int src_mask_peril1; + unsigned char res27[0xb8]; + unsigned int mux_stat_top0; + unsigned int mux_stat_top1; + unsigned char res28[0x10]; + unsigned int mux_stat_mfc; + unsigned int mux_stat_g3d; + unsigned char res29[0x28]; + unsigned int mux_stat_cam1; + unsigned char res30[0xb4]; + unsigned int div_top; + unsigned char res31[0xc]; + unsigned int div_cam; + unsigned int div_tv; + unsigned int div_mfc; + unsigned int div_g3d; + unsigned char res32[0x4]; + unsigned int div_lcd; + unsigned int div_isp; + unsigned int div_maudio; + unsigned int div_fsys0; + unsigned int div_fsys1; + unsigned int div_fsys2; + unsigned int div_fsys3; + unsigned int div_peril0; + unsigned int div_peril1; + unsigned int div_peril2; + unsigned int div_peril3; + unsigned int div_peril4; + unsigned int div_peril5; + unsigned int div_cam1; + unsigned char res33[0x14]; + unsigned int div2_ratio; + unsigned char res34[0x8c]; + unsigned int div_stat_top; + unsigned char res35[0xc]; + unsigned int div_stat_cam; + unsigned int div_stat_tv; + unsigned int div_stat_mfc; + unsigned int div_stat_g3d; + unsigned char res36[0x4]; + unsigned int div_stat_lcd; + unsigned int div_stat_isp; + unsigned int div_stat_maudio; + unsigned int div_stat_fsys0; + unsigned int div_stat_fsys1; + unsigned int div_stat_fsys2; + unsigned int div_stat_fsys3; + unsigned int div_stat_peril0; + unsigned int div_stat_peril1; + unsigned int div_stat_peril2; + unsigned int div_stat_peril3; + unsigned int div_stat_peril4; + unsigned int div_stat_peril5; + unsigned int div_stat_cam1; + unsigned char res37[0x14]; + unsigned int div2_stat; + unsigned char res38[0x29c]; + unsigned int gate_ip_cam; + unsigned int gate_ip_tv; + unsigned int gate_ip_mfc; + unsigned int gate_ip_g3d; + unsigned char res39[0x4]; + unsigned int gate_ip_lcd; + unsigned int gate_ip_isp; + unsigned char res40[0x4]; + unsigned int gate_ip_fsys; + unsigned char res41[0x8]; + unsigned int gate_ip_gps; + unsigned int gate_ip_peril; + unsigned char res42[0xc]; + unsigned char res43[0x4]; + unsigned char res44[0xc]; + unsigned int gate_block; + unsigned char res45[0x8c]; + unsigned int clkout_cmu_top; + unsigned int clkout_cmu_top_div_stat; + unsigned char res46[0x3600]; + unsigned int mpll_lock; + unsigned char res47[0xfc]; + unsigned int mpll_con0; + unsigned int mpll_con1; + unsigned char res48[0xf0]; + unsigned int src_dmc; + unsigned char res49[0xfc]; + unsigned int src_mask_dmc; + unsigned char res50[0xfc]; + unsigned int mux_stat_dmc; + unsigned char res51[0xfc]; + unsigned int div_dmc0; + unsigned int div_dmc1; + unsigned char res52[0xf8]; + unsigned int div_stat_dmc0; + unsigned int div_stat_dmc1; + unsigned char res53[0xf8]; + unsigned int gate_bus_dmc0; + unsigned int gate_bus_dmc1; + unsigned char res54[0x1f8]; + unsigned int gate_ip_dmc0; + unsigned int gate_ip_dmc1; + unsigned char res55[0xf8]; + unsigned int clkout_cmu_dmc; + unsigned int clkout_cmu_dmc_div_stat; + unsigned char res56[0x5f8]; + unsigned int dcgidx_map0; + unsigned int dcgidx_map1; + unsigned int dcgidx_map2; + unsigned char res57[0x14]; + unsigned int dcgperf_map0; + unsigned int dcgperf_map1; + unsigned char res58[0x18]; + unsigned int dvcidx_map; + unsigned char res59[0x1c]; + unsigned int freq_cpu; + unsigned int freq_dpm; + unsigned char res60[0x18]; + unsigned int dvsemclk_en; + unsigned int maxperf; + unsigned char res61[0x8]; + unsigned int dmc_freq_ctrl; + unsigned int dmc_pause_ctrl; + unsigned int dddrphy_lock_ctrl; + unsigned int c2c_state; + unsigned char res62[0x2f60]; + unsigned int apll_lock; + unsigned char res63[0x8]; + unsigned char res64[0xf4]; + unsigned int apll_con0; + unsigned int apll_con1; + unsigned char res65[0xf8]; + unsigned int src_cpu; + unsigned char res66[0x1fc]; + unsigned int mux_stat_cpu; + unsigned char res67[0xfc]; + unsigned int div_cpu0; + unsigned int div_cpu1; + unsigned char res68[0xf8]; + unsigned int div_stat_cpu0; + unsigned int div_stat_cpu1; + unsigned char res69[0x2f8]; + unsigned int clk_gate_ip_cpu; + unsigned char res70[0xfc]; + unsigned int clkout_cmu_cpu; + unsigned int clkout_cmu_cpu_div_stat; + unsigned char res71[0x5f8]; + unsigned int armclk_stopctrl; + unsigned int atclk_stopctrl; + unsigned char res72[0x10]; + unsigned char res73[0x8]; + unsigned int pwr_ctrl; + unsigned int pwr_ctrl2; + unsigned char res74[0xd8]; + unsigned int apll_con0_l8; + unsigned int apll_con0_l7; + unsigned int apll_con0_l6; + unsigned int apll_con0_l5; + unsigned int apll_con0_l4; + unsigned int apll_con0_l3; + unsigned int apll_con0_l2; + unsigned int apll_con0_l1; + unsigned int iem_control; + unsigned char res75[0xdc]; + unsigned int apll_con1_l8; + unsigned int apll_con1_l7; + unsigned int apll_con1_l6; + unsigned int apll_con1_l5; + unsigned int apll_con1_l4; + unsigned int apll_con1_l3; + unsigned int apll_con1_l2; + unsigned int apll_con1_l1; + unsigned char res76[0xe0]; + unsigned int div_iem_l8; + unsigned int div_iem_l7; + unsigned int div_iem_l6; + unsigned int div_iem_l5; + unsigned int div_iem_l4; + unsigned int div_iem_l3; + unsigned int div_iem_l2; + unsigned int div_iem_l1; + unsigned char res77[0xe0]; + unsigned int l2_status; + unsigned char res78[0xc]; + unsigned int cpu_status; + unsigned char res79[0xc]; + unsigned int ptm_status; + unsigned char res80[0x2edc]; + unsigned int div_isp0; + unsigned int div_isp1; + unsigned char res81[0xf8]; + unsigned int div_stat_isp0; + unsigned int div_stat_isp1; + unsigned char res82[0x3f8]; + unsigned int gate_ip_isp0; + unsigned int gate_ip_isp1; + unsigned char res83[0x1f8]; + unsigned int clkout_cmu_isp; + unsigned int clkout_cmu_ispd_div_stat; + unsigned char res84[0xf8]; + unsigned int cmu_isp_spar0; + unsigned int cmu_isp_spar1; + unsigned int cmu_isp_spar2; + unsigned int cmu_isp_spar3; +}; + struct exynos5_clock { unsigned int apll_lock; unsigned char res1[0xfc]; diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index f06af2e..eb34422 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -27,7 +27,7 @@ #define EXYNOS_CPU_NAME "Exynos" #define EXYNOS4_ADDR_BASE 0x10000000 -/* EXYNOS4 */ +/* EXYNOS4 Common*/ #define EXYNOS4_I2C_SPACING 0x10000 #define EXYNOS4_GPIO_PART3_BASE 0x03860000 @@ -63,7 +63,40 @@ #define EXYNOS4_DP_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4_SPI_ISP_BASE DEVICE_NOT_AVAILABLE -/* EXYNOS5 */ +/* EXYNOS4X12 */ +#define EXYNOS4X12_GPIO_PART3_BASE 0x03860000 +#define EXYNOS4X12_PRO_ID 0x10000000 +#define EXYNOS4X12_SYSREG_BASE 0x10010000 +#define EXYNOS4X12_POWER_BASE 0x10020000 +#define EXYNOS4X12_SWRESET 0x10020400 +#define EXYNOS4X12_USBPHY_CONTROL 0x10020704 +#define EXYNOS4X12_CLOCK_BASE 0x10030000 +#define EXYNOS4X12_SYSTIMER_BASE 0x10050000 +#define EXYNOS4X12_WATCHDOG_BASE 0x10060000 +#define EXYNOS4X12_DMC0_BASE 0x10600000 +#define EXYNOS4X12_DMC1_BASE 0x10610000 +#define EXYNOS4X12_GPIO_PART4_BASE 0x106E0000 +#define EXYNOS4X12_GPIO_PART2_BASE 0x11000000 +#define EXYNOS4X12_GPIO_PART1_BASE 0x11400000 +#define EXYNOS4X12_FIMD_BASE 0x11C00000 +#define EXYNOS4X12_MIPI_DSIM_BASE 0x11C80000 +#define EXYNOS4X12_USBOTG_BASE 0x12480000 +#define EXYNOS4X12_MMC_BASE 0x12510000 +#define EXYNOS4X12_SROMC_BASE 0x12570000 +#define EXYNOS4X12_USB_HOST_EHCI_BASE 0x12580000 +#define EXYNOS4X12_USBPHY_BASE 0x125B0000 +#define EXYNOS4X12_UART_BASE 0x13800000 +#define EXYNOS4X12_I2C_BASE 0x13860000 +#define EXYNOS4X12_PWMTIMER_BASE 0x139D0000 + +#define EXYNOS4X12_ADC_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_DP_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_MODEM_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_I2S_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_SPI_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_SPI_ISP_BASE DEVICE_NOT_AVAILABLE + +/* EXYNOS5 Common*/ #define EXYNOS5_I2C_SPACING 0x10000 #define EXYNOS5_GPIO_PART4_BASE 0x03860000 @@ -154,17 +187,20 @@ static inline int proid_is_##type(void) \ } IS_EXYNOS_TYPE(exynos4210, 0x4210) +IS_EXYNOS_TYPE(exynos4412, 0x4412) IS_EXYNOS_TYPE(exynos5250, 0x5250) #define SAMSUNG_BASE(device, base) \ static inline unsigned int samsung_get_base_##device(void) \ { \ - if (cpu_is_exynos4()) \ + if (cpu_is_exynos4()) { \ + if (proid_is_exynos4412()) \ + return EXYNOS4X12_##base; \ return EXYNOS4_##base; \ - else if (cpu_is_exynos5()) \ + } else if (cpu_is_exynos5()) { \ return EXYNOS5_##base; \ - else \ - return 0; \ + } \ + return 0; \ } SAMSUNG_BASE(adc, ADC_BASE) diff --git a/arch/arm/include/asm/arch-exynos/dp_info.h b/arch/arm/include/asm/arch-exynos/dp_info.h index 3569498..102b709 100644 --- a/arch/arm/include/asm/arch-exynos/dp_info.h +++ b/arch/arm/include/asm/arch-exynos/dp_info.h @@ -211,4 +211,6 @@ unsigned int exynos_init_dp(void) } #endif +void exynos_set_dp_platform_data(struct exynos_dp_platform_data *pd); + #endif /* _DP_INFO_H */ diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h index 4db8fd6..cfe1024 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -79,6 +79,67 @@ struct exynos4_gpio_part3 { struct s5p_gpio_bank z; }; +struct exynos4x12_gpio_part1 { + struct s5p_gpio_bank a0; + struct s5p_gpio_bank a1; + struct s5p_gpio_bank b; + struct s5p_gpio_bank c0; + struct s5p_gpio_bank c1; + struct s5p_gpio_bank d0; + struct s5p_gpio_bank d1; + struct s5p_gpio_bank res1[0x5]; + struct s5p_gpio_bank f0; + struct s5p_gpio_bank f1; + struct s5p_gpio_bank f2; + struct s5p_gpio_bank f3; + struct s5p_gpio_bank res2[0x2]; + struct s5p_gpio_bank j0; + struct s5p_gpio_bank j1; +}; + +struct exynos4x12_gpio_part2 { + struct s5p_gpio_bank res1[0x2]; + struct s5p_gpio_bank k0; + struct s5p_gpio_bank k1; + struct s5p_gpio_bank k2; + struct s5p_gpio_bank k3; + struct s5p_gpio_bank l0; + struct s5p_gpio_bank l1; + struct s5p_gpio_bank l2; + struct s5p_gpio_bank y0; + struct s5p_gpio_bank y1; + struct s5p_gpio_bank y2; + struct s5p_gpio_bank y3; + struct s5p_gpio_bank y4; + struct s5p_gpio_bank y5; + struct s5p_gpio_bank y6; + struct s5p_gpio_bank res2[0x3]; + struct s5p_gpio_bank m0; + struct s5p_gpio_bank m1; + struct s5p_gpio_bank m2; + struct s5p_gpio_bank m3; + struct s5p_gpio_bank m4; + struct s5p_gpio_bank res3[0x48]; + struct s5p_gpio_bank x0; + struct s5p_gpio_bank x1; + struct s5p_gpio_bank x2; + struct s5p_gpio_bank x3; +}; + +struct exynos4x12_gpio_part3 { + struct s5p_gpio_bank z; +}; + +struct exynos4x12_gpio_part4 { + struct s5p_gpio_bank v0; + struct s5p_gpio_bank v1; + struct s5p_gpio_bank res1[0x1]; + struct s5p_gpio_bank v2; + struct s5p_gpio_bank v3; + struct s5p_gpio_bank res2[0x1]; + struct s5p_gpio_bank v4; +}; + struct exynos5_gpio_part1 { struct s5p_gpio_bank a0; struct s5p_gpio_bank a1; @@ -163,6 +224,30 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); - EXYNOS4_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \ * GPIO_PER_BANK) + pin) + EXYNOS4_GPIO_PART1_MAX) +#define exynos4x12_gpio_part1_get_nr(bank, pin) \ + ((((((unsigned int) &(((struct exynos4x12_gpio_part1 *) \ + EXYNOS4X12_GPIO_PART1_BASE)->bank)) \ + - EXYNOS4X12_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \ + * GPIO_PER_BANK) + pin) + +#define EXYNOS4X12_GPIO_PART1_MAX ((sizeof(struct exynos4x12_gpio_part1) \ + / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) + +#define exynos4x12_gpio_part2_get_nr(bank, pin) \ + (((((((unsigned int) &(((struct exynos4x12_gpio_part2 *) \ + EXYNOS4X12_GPIO_PART2_BASE)->bank)) \ + - EXYNOS4X12_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \ + * GPIO_PER_BANK) + pin) + EXYNOS4X12_GPIO_PART1_MAX) + +#define EXYNOS4X12_GPIO_PART2_MAX ((sizeof(struct exynos4x12_gpio_part2) \ + / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) + +#define exynos4x12_gpio_part3_get_nr(bank, pin) \ + (((((((unsigned int) &(((struct exynos4x12_gpio_part3 *) \ + EXYNOS4X12_GPIO_PART3_BASE)->bank)) \ + - EXYNOS4X12_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \ + * GPIO_PER_BANK) + pin) + EXYNOS4X12_GPIO_PART2_MAX) + #define exynos5_gpio_part1_get_nr(bank, pin) \ ((((((unsigned int) &(((struct exynos5_gpio_part1 *) \ EXYNOS5_GPIO_PART1_BASE)->bank)) \ diff --git a/arch/arm/include/asm/arch-exynos/mipi_dsim.h b/arch/arm/include/asm/arch-exynos/mipi_dsim.h index 9a7cbeb..c1c9a35 100644 --- a/arch/arm/include/asm/arch-exynos/mipi_dsim.h +++ b/arch/arm/include/asm/arch-exynos/mipi_dsim.h @@ -358,7 +358,14 @@ struct mipi_dsim_lcd_driver { void (*mipi_display_on)(struct mipi_dsim_device *dsim_dev); }; +#ifdef CONFIG_EXYNOS_MIPI_DSIM int exynos_mipi_dsi_init(void); +#else +static inline int exynos_mipi_dsi_init(void) +{ + return 0; +} +#endif /* * register mipi_dsim_lcd_driver object defined by lcd panel driver diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h index 13abd2d..89bcdfc 100644 --- a/arch/arm/include/asm/arch-exynos/periph.h +++ b/arch/arm/include/asm/arch-exynos/periph.h @@ -25,12 +25,17 @@ #define __ASM_ARM_ARCH_PERIPH_H /* - * Peripherals requiring clock/pinmux configuration. List will + * Peripherals required for pinmux configuration. List will * grow with support for more devices getting added. + * Numbering based on interrupt table. * */ enum periph_id { - PERIPH_ID_I2C0, + PERIPH_ID_UART0 = 51, + PERIPH_ID_UART1, + PERIPH_ID_UART2, + PERIPH_ID_UART3, + PERIPH_ID_I2C0 = 56, PERIPH_ID_I2C1, PERIPH_ID_I2C2, PERIPH_ID_I2C3, @@ -38,22 +43,24 @@ enum periph_id { PERIPH_ID_I2C5, PERIPH_ID_I2C6, PERIPH_ID_I2C7, - PERIPH_ID_I2S1, - PERIPH_ID_SDMMC0, + PERIPH_ID_SPI0 = 68, + PERIPH_ID_SPI1, + PERIPH_ID_SPI2, + PERIPH_ID_SDMMC0 = 75, PERIPH_ID_SDMMC1, PERIPH_ID_SDMMC2, PERIPH_ID_SDMMC3, - PERIPH_ID_SDMMC4, - PERIPH_ID_SROMC, - PERIPH_ID_SPI0, - PERIPH_ID_SPI1, - PERIPH_ID_SPI2, + PERIPH_ID_I2S1 = 99, + + /* Since following peripherals do + * not have shared peripheral interrupts (SPIs) + * they are numbered arbitiraly after the maximum + * SPIs Exynos has (128) + */ + PERIPH_ID_SROMC = 128, PERIPH_ID_SPI3, PERIPH_ID_SPI4, - PERIPH_ID_UART0, - PERIPH_ID_UART1, - PERIPH_ID_UART2, - PERIPH_ID_UART3, + PERIPH_ID_SDMMC4, PERIPH_ID_COUNT, PERIPH_ID_NONE = -1, diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h index 10ea736..014eebc 100644 --- a/arch/arm/include/asm/arch-exynos/pinmux.h +++ b/arch/arm/include/asm/arch-exynos/pinmux.h @@ -55,4 +55,12 @@ enum { */ int exynos_pinmux_config(int peripheral, int flags); +/** + * Decode the peripheral id using the interrpt numbers. + * + * @param blob Device tree blob + * @param node FDT I2C node to find + * @return peripheral id if ok, PERIPH_ID_NONE on error + */ +int pinmux_decode_periph_id(const void *blob, int node); #endif diff --git a/arch/arm/include/asm/arch-exynos/sromc.h b/arch/arm/include/asm/arch-exynos/sromc.h index f616bcb..dc6aae2 100644 --- a/arch/arm/include/asm/arch-exynos/sromc.h +++ b/arch/arm/include/asm/arch-exynos/sromc.h @@ -48,4 +48,22 @@ struct s5p_sromc { /* Configure the Band Width and Bank Control Regs for required SROMC Bank */ void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf); +enum { + FDT_SROM_PMC, + FDT_SROM_TACP, + FDT_SROM_TAH, + FDT_SROM_TCOH, + FDT_SROM_TACC, + FDT_SROM_TCOS, + FDT_SROM_TACS, + + FDT_SROM_TIMING_COUNT, +}; + +struct fdt_sromc { + u8 bank; /* srom bank number */ + u8 width; /* bus width in bytes */ + unsigned int timing[FDT_SROM_TIMING_COUNT]; /* timing parameters */ +}; + #endif /* __ASM_ARCH_SROMC_H_ */ diff --git a/arch/arm/include/asm/arch-kirkwood/cpu.h b/arch/arm/include/asm/arch-kirkwood/cpu.h index 57bfe8e..009a6bb 100644 --- a/arch/arm/include/asm/arch-kirkwood/cpu.h +++ b/arch/arm/include/asm/arch-kirkwood/cpu.h @@ -33,7 +33,7 @@ | (attr << 8) | (kw_winctrl_calcsize(size) << 16)) #define KWGBE_PORT_SERIAL_CONTROL1_REG(_x) \ - ((_x ? KW_EGIGA0_BASE : KW_EGIGA1_BASE) + 0x44c) + ((_x ? KW_EGIGA1_BASE : KW_EGIGA0_BASE) + 0x44c) #define KW_REG_PCIE_DEVID (KW_REG_PCIE_BASE + 0x00) #define KW_REG_PCIE_REVID (KW_REG_PCIE_BASE + 0x08) diff --git a/arch/arm/include/asm/arch-kirkwood/mpp.h b/arch/arm/include/asm/arch-kirkwood/mpp.h index 8ceea7b..48d1477 100644 --- a/arch/arm/include/asm/arch-kirkwood/mpp.h +++ b/arch/arm/include/asm/arch-kirkwood/mpp.h @@ -312,6 +312,6 @@ #define MPP_MAX 49 -void kirkwood_mpp_conf(u32 *mpp_list, u32 *mpp_save); +void kirkwood_mpp_conf(const u32 *mpp_list, u32 *mpp_save); #endif diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 2b9af93..41a26ed 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -73,6 +73,7 @@ typedef struct global_data { unsigned long reloc_off; #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) unsigned long tlb_addr; + unsigned long tlb_size; #endif const void *fdt_blob; /* Our device tree, NULL if none */ void **jt; /* jump table */ diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 3422ac1..57111af 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -36,18 +36,21 @@ GLSOBJS += _umodsi3.o GLCOBJS += div0.o +SOBJS-y += crt0.o + ifndef CONFIG_SPL_BUILD COBJS-y += board.o COBJS-y += bootm.o COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o -COBJS-y += interrupts.o -COBJS-y += reset.o SOBJS-$(CONFIG_USE_ARCH_MEMSET) += memset.o SOBJS-$(CONFIG_USE_ARCH_MEMCPY) += memcpy.o else COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o endif +COBJS-y += interrupts.o +COBJS-y += reset.o + COBJS-y += cache.o COBJS-y += cache-cp15.o diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index e0cb635..cfe32cc 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -40,6 +40,7 @@ #include <common.h> #include <command.h> +#include <environment.h> #include <malloc.h> #include <stdio_dev.h> #include <version.h> @@ -231,15 +232,23 @@ int __power_init_board(void) int power_init_board(void) __attribute__((weak, alias("__power_init_board"))); + /* Record the board_init_f() bootstage (after arch_cpu_init()) */ +static int mark_bootstage(void) +{ + bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f"); + + return 0; +} + init_fnc_t *init_sequence[] = { arch_cpu_init, /* basic arch cpu dependent setup */ - -#if defined(CONFIG_BOARD_EARLY_INIT_F) - board_early_init_f, -#endif + mark_bootstage, #ifdef CONFIG_OF_CONTROL fdtdec_check_fdt, #endif +#if defined(CONFIG_BOARD_EARLY_INIT_F) + board_early_init_f, +#endif timer_init, /* initialize timer */ #ifdef CONFIG_BOARD_POSTCLK_INIT board_postclk_init, @@ -277,13 +286,6 @@ void board_init_f(ulong bootflag) void *new_fdt = NULL; size_t fdt_size = 0; - bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f"); - - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) ((CONFIG_SYS_INIT_SP_ADDR) & ~0x07); - /* compiler optimization barrier needed for GCC >= 3.4 */ - __asm__ __volatile__("": : :"memory"); - memset((void *)gd, 0, sizeof(gd_t)); gd->mon_len = _bss_end_ofs; @@ -353,13 +355,14 @@ void board_init_f(ulong bootflag) #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) /* reserve TLB table */ - addr -= (4096 * 4); + gd->tlb_size = 4096 * 4; + addr -= gd->tlb_size; /* round down to next 64 kB limit */ addr &= ~(0x10000 - 1); gd->tlb_addr = addr; - debug("TLB table at: %08lx\n", addr); + debug("TLB table from %08lx to %08lx\n", addr, addr + gd->tlb_size); #endif /* round down to next 4 kB limit */ @@ -465,10 +468,6 @@ void board_init_f(ulong bootflag) gd->fdt_blob = new_fdt; } memcpy(id, (void *)gd, sizeof(gd_t)); - - relocate_code(addr_sp, id, addr); - - /* NOTREACHED - relocate_code() does not return */ } #if !defined(CONFIG_SYS_NO_FLASH) @@ -476,7 +475,38 @@ static char *failed = "*** failed ***\n"; #endif /* - ************************************************************************ + * Tell if it's OK to load the environment early in boot. + * + * If CONFIG_OF_CONFIG is defined, we'll check with the FDT to see + * if this is OK (defaulting to saying it's not OK). + * + * NOTE: Loading the environment early can be a bad idea if security is + * important, since no verification is done on the environment. + * + * @return 0 if environment should not be loaded, !=0 if it is ok to load + */ +static int should_load_env(void) +{ +#ifdef CONFIG_OF_CONTROL + return fdtdec_get_config_int(gd->fdt_blob, "load-environment", 0); +#elif defined CONFIG_DELAY_ENVIRONMENT + return 0; +#else + return 1; +#endif +} + +#if defined(CONFIG_DISPLAY_BOARDINFO_LATE) && defined(CONFIG_OF_CONTROL) +static void display_fdt_model(const void *blob) +{ + const char *model; + + model = (char *)fdt_getprop(blob, 0, "model", NULL); + printf("Model: %s\n", model ? model : "<unknown>"); +} +#endif + +/************************************************************************ * * This is the next part if the initialization sequence: we are now * running from RAM and have a "normal" C environment, i. e. global @@ -493,8 +523,6 @@ void board_init_r(gd_t *id, ulong dest_addr) ulong flash_size; #endif - gd = id; - gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r"); @@ -571,8 +599,8 @@ void board_init_r(gd_t *id, ulong dest_addr) #endif #ifdef CONFIG_GENERIC_MMC - puts("MMC: "); - mmc_initialize(gd->bd); + puts("MMC: "); + mmc_initialize(gd->bd); #endif #ifdef CONFIG_HAS_DATAFLASH @@ -581,7 +609,10 @@ void board_init_r(gd_t *id, ulong dest_addr) #endif /* initialize environment */ - env_relocate(); + if (should_load_env()) + env_relocate(); + else + set_default_env(NULL); #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) arm_pci_init(); @@ -598,6 +629,15 @@ void board_init_r(gd_t *id, ulong dest_addr) console_init_r(); /* fully init console as a device */ +#ifdef CONFIG_DISPLAY_BOARDINFO_LATE +# ifdef CONFIG_OF_CONTROL + /* Put this here so it appears on the LCD, now it is ready */ + display_fdt_model(gd->fdt_blob); +# else + checkboard(); +# endif +#endif + #if defined(CONFIG_ARCH_MISC_INIT) /* miscellaneous arch dependent initialisations */ arch_misc_init(); diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c index 6edf815..1cab27c 100644 --- a/arch/arm/lib/cache-cp15.c +++ b/arch/arm/lib/cache-cp15.c @@ -153,8 +153,11 @@ static void cache_disable(uint32_t cache_bit) return; /* if disabling data cache, disable mmu too */ cache_bit |= CR_M; - flush_dcache_all(); } + reg = get_cr(); + cp_delay(); + if (cache_bit == (CR_C | CR_M)) + flush_dcache_all(); set_cr(reg & ~cache_bit); } #endif diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S new file mode 100644 index 0000000..4f60958 --- /dev/null +++ b/arch/arm/lib/crt0.S @@ -0,0 +1,173 @@ +/* + * crt0 - C-runtime startup Code for ARM U-Boot + * + * Copyright (c) 2012 Albert ARIBAUD <albert.u.boot@aribaud.net> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm-offsets.h> + +/* + * This file handles the target-independent stages of the U-Boot + * start-up where a C runtime environment is needed. Its entry point + * is _main and is branched into from the target's start.S file. + * + * _main execution sequence is: + * + * 1. Set up initial environment for calling board_init_f(). + * This environment only provides a stack and a place to store + * the GD ('global data') structure, both located in some readily + * available RAM (SRAM, locked cache...). In this context, VARIABLE + * global data, initialized or not (BSS), are UNAVAILABLE; only + * CONSTANT initialized data are available. + * + * 2. Call board_init_f(). This function prepares the hardware for + * execution from system RAM (DRAM, DDR...) As system RAM may not + * be available yet, , board_init_f() must use the current GD to + * store any data which must be passed on to later stages. These + * data include the relocation destination, the future stack, and + * the future GD location. + * + * (the following applies only to non-SPL builds) + * + * 3. Set up intermediate environment where the stack and GD are the + * ones allocated by board_init_f() in system RAM, but BSS and + * initialized non-const data are still not available. + * + * 4. Call relocate_code(). This function relocates U-Boot from its + * current location into the relocation destination computed by + * board_init_f(). + * + * 5. Set up final environment for calling board_init_r(). This + * environment has BSS (initialized to 0), initialized non-const + * data (initialized to their intended value), and stack in system + * RAM. GD has retained values set by board_init_f(). Some CPUs + * have some work left to do at this point regarding memory, so + * call c_runtime_cpu_setup. + * + * 6. Branch to either nand_boot() or board_init_r(). + */ + +/* + * declare nand_boot() or board_init_r() to jump to at end of crt0 + */ + +#if defined(CONFIG_NAND_SPL) + +.globl nand_boot + +#elif ! defined(CONFIG_SPL_BUILD) + +.globl board_init_r + +#endif + +/* + * start and end of BSS + */ + +.globl __bss_start +.globl __bss_end__ + +/* + * entry point of crt0 sequence + */ + +.global _main + +_main: + +/* + * Set up initial C runtime environment and call board_init_f(0). + */ + +#if defined(CONFIG_NAND_SPL) + /* deprecated, use instead CONFIG_SPL_BUILD */ + ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) +#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) + ldr sp, =(CONFIG_SPL_STACK) +#else + ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) +#endif + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ + sub sp, #GD_SIZE /* allocate one GD above SP */ + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ + mov r8, sp /* GD is above SP */ + mov r0, #0 + bl board_init_f + +#if ! defined(CONFIG_SPL_BUILD) + +/* + * Set up intermediate environment (new sp and gd) and call + * relocate_code(addr_sp, gd, addr_moni). Trick here is that + * we'll return 'here' but relocated. + */ + + ldr sp, [r8, #GD_START_ADDR_SP] /* r8 = gd->start_addr_sp */ + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ + ldr r8, [r8, #GD_BD] /* r8 = gd->bd */ + sub r8, r8, #GD_SIZE /* new GD is below bd */ + + adr lr, here + ldr r0, [r8, #GD_RELOC_OFF] /* lr = gd->start_addr_sp */ + add lr, lr, r0 + ldr r0, [r8, #GD_START_ADDR_SP] /* r0 = gd->start_addr_sp */ + mov r1, r8 /* r1 = gd */ + ldr r2, [r8, #GD_RELOCADDR] /* r2 = gd->relocaddr */ + b relocate_code +here: + +/* Set up final (full) environment */ + + bl c_runtime_cpu_setup /* we still call old routine here */ + + ldr r0, =__bss_start /* this is auto-relocated! */ + ldr r1, =__bss_end__ /* this is auto-relocated! */ + + mov r2, #0x00000000 /* prepare zero to clear BSS */ + +clbss_l:cmp r0, r1 /* while not at end of BSS */ + strlo r2, [r0] /* clear 32-bit BSS word */ + addlo r0, r0, #4 /* move to next */ + blo clbss_l + + bl coloured_LED_init + bl red_led_on + +#if defined(CONFIG_NAND_SPL) + + /* call _nand_boot() */ + ldr pc, =nand_boot + +#else + + /* call board_init_r(gd_t *id, ulong dest_addr) */ + mov r0, r8 /* gd_t */ + ldr r1, [r8, #GD_RELOCADDR] /* dest_addr */ + /* call board_init_r */ + ldr pc, =board_init_r /* this is auto-relocated! */ + +#endif + + /* we should not return here. */ + +#endif |