diff options
Diffstat (limited to 'arch/arm')
23 files changed, 209 insertions, 77 deletions
diff --git a/arch/arm/cpu/arm926ejs/at91/eflash.c b/arch/arm/cpu/arm926ejs/at91/eflash.c index 3e21cdb..3f39264 100644 --- a/arch/arm/cpu/arm926ejs/at91/eflash.c +++ b/arch/arm/cpu/arm926ejs/at91/eflash.c @@ -28,7 +28,7 @@ * by u-Boot commands. * * Note: Redundant environment will not work in this flash since - * it does use partial page writes. Make sure the environent spans + * it does use partial page writes. Make sure the environment spans * whole pages! */ diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c index cde3172..d4711c0 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c @@ -302,7 +302,7 @@ int arch_cpu_init(void) /* * Configures the I/O voltage of the pads connected to Egigabit * Ethernet interface to 1.8V - * By defult it is set to 3.3V + * By default it is set to 3.3V */ reg = readl(KW_REG_MPP_OUT_DRV_REG); reg |= (1 << 7); diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/cpu/armv7/at91/sama5d3_devices.c index e55e1c6..51f0a6d 100644 --- a/arch/arm/cpu/armv7/at91/sama5d3_devices.c +++ b/arch/arm/cpu/armv7/at91/sama5d3_devices.c @@ -202,3 +202,15 @@ void at91_lcd_hw_init(void) at91_periph_clk_enable(ATMEL_ID_LCDC); } #endif + +#ifdef CONFIG_USB_GADGET_ATMEL_USBA +void at91_udp_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + /* Enable UPLL clock */ + writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); + /* Enable UDPHS clock */ + at91_periph_clk_enable(ATMEL_ID_UDPHS); +} +#endif diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index 0cb1a61..36fedd6 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -282,6 +282,9 @@ static unsigned long exynos5_get_periph_rate(int peripheral) src = readl(&clk->src_peric0); div = readl(&clk->div_peric3); break; + case PERIPH_ID_I2S0: + src = readl(&clk->src_mau); + div = readl(&clk->div_mau); case PERIPH_ID_SPI0: case PERIPH_ID_SPI1: src = readl(&clk->src_peric1); @@ -1146,17 +1149,29 @@ int exynos5_set_epll_clk(unsigned long rate) return 0; } -void exynos5_set_i2s_clk_source(void) +int exynos5_set_i2s_clk_source(unsigned int i2s_id) { struct exynos5_clock *clk = (struct exynos5_clock *)samsung_get_base_clock(); - - clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK, - (CLK_SRC_SCLK_EPLL)); + unsigned int *audio_ass = (unsigned int *)samsung_get_base_audio_ass(); + + if (i2s_id == 0) { + setbits_le32(&clk->src_top2, CLK_SRC_MOUT_EPLL); + clrsetbits_le32(&clk->src_mau, AUDIO0_SEL_MASK, + (CLK_SRC_SCLK_EPLL)); + setbits_le32(audio_ass, AUDIO_CLKMUX_ASS); + } else if (i2s_id == 1) { + clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK, + (CLK_SRC_SCLK_EPLL)); + } else { + return -1; + } + return 0; } int exynos5_set_i2s_clk_prescaler(unsigned int src_frq, - unsigned int dst_frq) + unsigned int dst_frq, + unsigned int i2s_id) { struct exynos5_clock *clk = (struct exynos5_clock *)samsung_get_base_clock(); @@ -1169,13 +1184,27 @@ int exynos5_set_i2s_clk_prescaler(unsigned int src_frq, } div = (src_frq / dst_frq); - if (div > AUDIO_1_RATIO_MASK) { - debug("%s: Frequency ratio is out of range\n", __func__); - debug("src frq = %d des frq = %d ", src_frq, dst_frq); + if (i2s_id == 0) { + if (div > AUDIO_0_RATIO_MASK) { + debug("%s: Frequency ratio is out of range\n", + __func__); + debug("src frq = %d des frq = %d ", src_frq, dst_frq); + return -1; + } + clrsetbits_le32(&clk->div_mau, AUDIO_0_RATIO_MASK, + (div & AUDIO_0_RATIO_MASK)); + } else if(i2s_id == 1) { + if (div > AUDIO_1_RATIO_MASK) { + debug("%s: Frequency ratio is out of range\n", + __func__); + debug("src frq = %d des frq = %d ", src_frq, dst_frq); + return -1; + } + clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK, + (div & AUDIO_1_RATIO_MASK)); + } else { return -1; } - clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK, - (div & AUDIO_1_RATIO_MASK)); return 0; } @@ -1415,19 +1444,21 @@ int set_spi_clk(int periph_id, unsigned int rate) return 0; } -int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq) +int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq, + unsigned int i2s_id) { - if (cpu_is_exynos5()) - return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq); + return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq, i2s_id); else return 0; } -void set_i2s_clk_source(void) +int set_i2s_clk_source(unsigned int i2s_id) { if (cpu_is_exynos5()) - exynos5_set_i2s_clk_source(); + return exynos5_set_i2s_clk_source(i2s_id); + else + return 0; } int set_epll_clk(unsigned long rate) diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index 1b05ebf..8002bce 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -220,10 +220,20 @@ static void exynos5_i2s_config(int peripheral) { int i; struct exynos5_gpio_part1 *gpio1 = - (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + (struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1(); + struct exynos5_gpio_part4 *gpio4 = + (struct exynos5_gpio_part4 *)samsung_get_base_gpio_part4(); - for (i = 0; i < 5; i++) - s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02)); + switch (peripheral) { + case PERIPH_ID_I2S0: + for (i = 0; i < 5; i++) + s5p_gpio_cfg_pin(&gpio4->z, i, GPIO_FUNC(0x02)); + break; + case PERIPH_ID_I2S1: + for (i = 0; i < 5; i++) + s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02)); + break; + } } void exynos5_spi_config(int peripheral) @@ -296,6 +306,7 @@ static int exynos5_pinmux_config(int peripheral, int flags) case PERIPH_ID_I2C7: exynos5_i2c_config(peripheral, flags); break; + case PERIPH_ID_I2S0: case PERIPH_ID_I2S1: exynos5_i2s_config(peripheral); break; @@ -463,11 +474,11 @@ static int exynos4_pinmux_config(int peripheral, int flags) int exynos_pinmux_config(int peripheral, int flags) { - if (cpu_is_exynos5()) + if (cpu_is_exynos5()) { return exynos5_pinmux_config(peripheral, flags); - else if (cpu_is_exynos4()) + } else if (cpu_is_exynos4()) { return exynos4_pinmux_config(peripheral, flags); - else { + } else { debug("pinmux functionality not supported\n"); return -1; } diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S index 358348f..24b4c18 100644 --- a/arch/arm/cpu/armv7/nonsec_virt.S +++ b/arch/arm/cpu/armv7/nonsec_virt.S @@ -3,23 +3,7 @@ * * Copyright (c) 2013 Andre Przywara <andre.przywara@linaro.org> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <config.h> diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index fbbc486..a1b249e 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -170,7 +170,7 @@ static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = { static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = { {32, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 12 MHz */ - {96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 20 MHz */ + {96, 4, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 20 MHz */ {160, 6, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 16.8 MHz */ {20, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 19.2 MHz */ {192, 12, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 26 MHz */ @@ -426,6 +426,10 @@ void enable_basic_clocks(void) #ifdef CONFIG_DRIVER_TI_CPSW (*prcm)->cm_gmac_gmac_clkctrl, #endif + +#ifdef CONFIG_TI_QSPI + (*prcm)->cm_l4per_qspi_clkctrl, +#endif 0 }; @@ -454,6 +458,10 @@ void enable_basic_clocks(void) clk_modules_explicit_en_essential, 1); +#ifdef CONFIG_TI_QSPI + setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24)); +#endif + /* Enable SCRM OPT clocks for PER and CORE dpll */ setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, OPTFCLKEN_SCRM_PER_MASK); diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index 5a3d52c..7a7cade 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -921,6 +921,7 @@ struct prcm_regs const dra7xx_prcm = { .cm_l4per_gpio8_clkctrl = 0x4a009818, .cm_l4per_mmcsd3_clkctrl = 0x4a009820, .cm_l4per_mmcsd4_clkctrl = 0x4a009828, + .cm_l4per_qspi_clkctrl = 0x4a009838, .cm_l4per_uart1_clkctrl = 0x4a009840, .cm_l4per_uart2_clkctrl = 0x4a009848, .cm_l4per_uart3_clkctrl = 0x4a009850, diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c index 6de7fe7..2cd604f 100644 --- a/arch/arm/cpu/armv7/virt-v7.c +++ b/arch/arm/cpu/armv7/virt-v7.c @@ -1,28 +1,12 @@ /* * (C) Copyright 2013 - * Andre Przywara, Linaro + * Andre Przywara, Linaro <andre.przywara@linaro.org> * * Routines to transition ARMv7 processors from secure into non-secure state * and from non-secure SVC into HYP mode * needed to enable ARMv7 virtualization for current hypervisors * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi index 4fff5e3..1c5474f 100644 --- a/arch/arm/dts/exynos5250.dtsi +++ b/arch/arm/dts/exynos5250.dtsi @@ -93,9 +93,28 @@ interrupts = <0 63 0>; }; + sound@3830000 { + compatible = "samsung,exynos-sound"; + reg = <0x3830000 0x50>; + samsung,i2s-epll-clock-frequency = <192000000>; + samsung,i2s-sampling-rate = <48000>; + samsung,i2s-bits-per-sample = <16>; + samsung,i2s-channels = <2>; + samsung,i2s-lr-clk-framesize = <256>; + samsung,i2s-bit-clk-framesize = <32>; + samsung,i2s-id = <0>; + }; + sound@12d60000 { compatible = "samsung,exynos-sound"; reg = <0x12d60000 0x20>; + samsung,i2s-epll-clock-frequency = <192000000>; + samsung,i2s-sampling-rate = <48000>; + samsung,i2s-bits-per-sample = <16>; + samsung,i2s-channels = <2>; + samsung,i2s-lr-clk-framesize = <256>; + samsung,i2s-bit-clk-framesize = <32>; + samsung,i2s-id = <1>; }; spi@12d20000 { diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h index 9f54fdd..abcb97d 100644 --- a/arch/arm/include/asm/arch-at91/at91_common.h +++ b/arch/arm/include/asm/arch-at91/at91_common.h @@ -19,6 +19,7 @@ void at91_serial2_hw_init(void); void at91_seriald_hw_init(void); void at91_spi0_hw_init(unsigned long cs_mask); void at91_spi1_hw_init(unsigned long cs_mask); +void at91_udp_hw_init(void); void at91_uhp_hw_init(void); void at91_lcd_hw_init(void); diff --git a/arch/arm/include/asm/arch-at91/atmel_usba_udc.h b/arch/arm/include/asm/arch-at91/atmel_usba_udc.h new file mode 100644 index 0000000..6f540d2 --- /dev/null +++ b/arch/arm/include/asm/arch-at91/atmel_usba_udc.h @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2005-2013 Atmel Corporation + * Bo Shen <voice.shen@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ATMEL_USBA_UDC_H__ +#define __ATMEL_USBA_UDC_H__ + +#include <linux/usb/atmel_usba_udc.h> + +#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \ + [idx] = { \ + .name = nam, \ + .index = idx, \ + .fifo_size = maxpkt, \ + .nr_banks = maxbk, \ + .can_dma = dma, \ + .can_isoc = isoc, \ + } + +#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \ + defined(CONFIG_AT91SAM9X5) +static struct usba_ep_data usba_udc_ep[] = { + EP("ep0", 0, 64, 1, 0, 0), + EP("ep1", 1, 1024, 2, 1, 1), + EP("ep2", 2, 1024, 2, 1, 1), + EP("ep3", 3, 1024, 3, 1, 0), + EP("ep4", 4, 1024, 3, 1, 0), + EP("ep5", 5, 1024, 3, 1, 1), + EP("ep6", 6, 1024, 3, 1, 1), +}; +#elif defined(CONFIG_SAMA5D3) +static struct usba_ep_data usba_udc_ep[] = { + EP("ep0", 0, 64, 1, 0, 0), + EP("ep1", 1, 1024, 3, 1, 0), + EP("ep2", 2, 1024, 3, 1, 0), + EP("ep3", 3, 1024, 2, 1, 0), + EP("ep4", 4, 1024, 2, 1, 0), + EP("ep5", 5, 1024, 2, 1, 0), + EP("ep6", 6, 1024, 2, 1, 0), + EP("ep7", 7, 1024, 2, 1, 0), + EP("ep8", 8, 1024, 2, 0, 0), + EP("ep9", 9, 1024, 2, 0, 0), + EP("ep10", 10, 1024, 2, 0, 0), + EP("ep11", 11, 1024, 2, 0, 0), + EP("ep12", 12, 1024, 2, 0, 0), + EP("ep13", 13, 1024, 2, 0, 0), + EP("ep14", 14, 1024, 2, 0, 0), + EP("ep15", 15, 1024, 2, 0, 0), +}; +#else +# error "NO usba_udc_ep defined" +#endif + +#undef EP + +struct usba_platform_data pdata = { + .num_ep = ARRAY_SIZE(usba_udc_ep), + .ep = usba_udc_ep, +}; + +#endif diff --git a/arch/arm/include/asm/arch-at91/sama5d3.h b/arch/arm/include/asm/arch-at91/sama5d3.h index fefee5e..123a627 100644 --- a/arch/arm/include/asm/arch-at91/sama5d3.h +++ b/arch/arm/include/asm/arch-at91/sama5d3.h @@ -120,7 +120,7 @@ #define ATMEL_BASE_USART3 0xf8024000 #define ATMEL_BASE_UART1 0xf8028000 #define ATMEL_BASE_EMAC 0xf802c000 -#define ATMEL_BASE_UDHPS 0xf8030000 +#define ATMEL_BASE_UDPHS 0xf8030000 #define ATMEL_BASE_SHA 0xf8034000 #define ATMEL_BASE_AES 0xf8038000 #define ATMEL_BASE_TDES 0xf803c000 diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h index 71075bd..1d6fa93 100644 --- a/arch/arm/include/asm/arch-exynos/clk.h +++ b/arch/arm/include/asm/arch-exynos/clk.h @@ -31,8 +31,9 @@ void set_mmc_clk(int dev_index, unsigned int div); unsigned long get_lcd_clk(void); void set_lcd_clk(void); void set_mipi_clk(void); -void set_i2s_clk_source(void); -int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq); +int set_i2s_clk_source(unsigned int i2s_id); +int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq, + unsigned int i2s_id); int set_epll_clk(unsigned long rate); int set_spi_clk(int periph_id, unsigned int rate); diff --git a/arch/arm/include/asm/arch-exynos/clock.h b/arch/arm/include/asm/arch-exynos/clock.h index 2b97b9a..cf26eef 100644 --- a/arch/arm/include/asm/arch-exynos/clock.h +++ b/arch/arm/include/asm/arch-exynos/clock.h @@ -876,8 +876,12 @@ struct set_epll_con_val { #define AUDIO_0_RATIO_MASK 0x0f #define AUDIO_1_RATIO_MASK 0x0f +#define AUDIO0_SEL_MASK 0xf #define AUDIO1_SEL_MASK 0xf + #define CLK_SRC_SCLK_EPLL 0x7 +#define CLK_SRC_MOUT_EPLL (1<<12) +#define AUDIO_CLKMUX_ASS (1<<0) /* CON0 bit-fields */ #define EPLL_CON0_MDIV_MASK 0x1ff diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index cb924fb..4b67191 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -50,6 +50,7 @@ #define EXYNOS4_SPI_ISP_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4_ACE_SFR_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4_DMC_PHY_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4_AUDIOSS_BASE DEVICE_NOT_AVAILABLE /* EXYNOS4X12 */ #define EXYNOS4X12_GPIO_PART3_BASE 0x03860000 @@ -85,10 +86,12 @@ #define EXYNOS4X12_SPI_ISP_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4X12_ACE_SFR_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4X12_DMC_PHY_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4X12_AUDIOSS_BASE DEVICE_NOT_AVAILABLE /* EXYNOS5 Common*/ #define EXYNOS5_I2C_SPACING 0x10000 +#define EXYNOS5_AUDIOSS_BASE 0x03810000 #define EXYNOS5_GPIO_PART4_BASE 0x03860000 #define EXYNOS5_PRO_ID 0x10000000 #define EXYNOS5_CLOCK_BASE 0x10010000 @@ -226,6 +229,7 @@ SAMSUNG_BASE(spi_isp, SPI_ISP_BASE) SAMSUNG_BASE(tzpc, TZPC_BASE) SAMSUNG_BASE(dmc_ctrl, DMC_CTRL_BASE) SAMSUNG_BASE(dmc_phy, DMC_PHY_BASE) +SAMSUNG_BASE(audio_ass, AUDIOSS_BASE) #endif #endif /* _EXYNOS4_CPU_H */ diff --git a/arch/arm/include/asm/arch-exynos/i2s-regs.h b/arch/arm/include/asm/arch-exynos/i2s-regs.h index 613b9b7..4a4a7a0 100644 --- a/arch/arm/include/asm/arch-exynos/i2s-regs.h +++ b/arch/arm/include/asm/arch-exynos/i2s-regs.h @@ -8,10 +8,12 @@ #ifndef __I2S_REGS_H__ #define __I2S_REGS_H__ +#define CON_RESET (1 << 31) #define CON_TXFIFO_FULL (1 << 8) #define CON_TXCH_PAUSE (1 << 4) #define CON_ACTIVE (1 << 0) +#define MOD_OP_CLK (3 << 30) #define MOD_BLCP_SHIFT 24 #define MOD_BLCP_16BIT (0 << MOD_BLCP_SHIFT) #define MOD_BLCP_8BIT (1 << MOD_BLCP_SHIFT) @@ -24,6 +26,7 @@ #define MOD_BLC_MASK (3 << 13) #define MOD_SLAVE (1 << 11) +#define MOD_RCLKSRC (0 << 10) #define MOD_MASK (3 << 8) #define MOD_LR_LLOW (0 << 7) #define MOD_LR_RLOW (1 << 7) @@ -47,4 +50,7 @@ #define FIC_TXFLUSH (1 << 15) #define FIC_RXFLUSH (1 << 7) +#define PSREN (1 << 15) +#define PSVAL (3 << 8) + #endif /* __I2S_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h index 9952155..64bd8b7 100644 --- a/arch/arm/include/asm/arch-exynos/periph.h +++ b/arch/arm/include/asm/arch-exynos/periph.h @@ -34,6 +34,7 @@ enum periph_id { PERIPH_ID_SDMMC1, PERIPH_ID_SDMMC2, PERIPH_ID_SDMMC3, + PERIPH_ID_I2S0 = 98, PERIPH_ID_I2S1 = 99, /* Since following peripherals do diff --git a/arch/arm/include/asm/arch-exynos/spi.h b/arch/arm/include/asm/arch-exynos/spi.h index fb23aa6..147c1a7 100644 --- a/arch/arm/include/asm/arch-exynos/spi.h +++ b/arch/arm/include/asm/arch-exynos/spi.h @@ -22,7 +22,7 @@ struct exynos_spi { unsigned int rx_data; /* 0x1c */ unsigned int pkt_cnt; /* 0x20 */ unsigned char reserved2[4]; - unsigned char reserved3[4]; + unsigned int swap_cfg; /* 0x28 */ unsigned int fb_clk; /* 0x2c */ unsigned char padding[0xffd0]; }; @@ -62,5 +62,14 @@ struct exynos_spi { /* Packet Count */ #define SPI_PACKET_CNT_EN (1 << 16) +/* Swap config */ +#define SPI_TX_SWAP_EN (1 << 0) +#define SPI_TX_BYTE_SWAP (1 << 2) +#define SPI_TX_HWORD_SWAP (1 << 3) +#define SPI_TX_BYTE_SWAP (1 << 2) +#define SPI_RX_SWAP_EN (1 << 4) +#define SPI_RX_BYTE_SWAP (1 << 6) +#define SPI_RX_HWORD_SWAP (1 << 7) + #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/arch-omap5/ehci.h b/arch/arm/include/asm/arch-omap5/ehci.h index 3921e4a..63aaa02 100644 --- a/arch/arm/include/asm/arch-omap5/ehci.h +++ b/arch/arm/include/asm/arch-omap5/ehci.h @@ -2,20 +2,7 @@ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com* * Author: Govindraj R <govindraj.raja@ti.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef _EHCI_H diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index e9a51d3..414d37a 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -61,6 +61,9 @@ /* GPMC */ #define OMAP54XX_GPMC_BASE 0x50000000 +/* QSPI */ +#define QSPI_BASE 0x4B300000 + /* * Hardware Register Details */ diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h index fe8b0c0..57f0de5 100644 --- a/arch/arm/include/asm/arch-omap5/spl.h +++ b/arch/arm/include/asm/arch-omap5/spl.h @@ -15,6 +15,7 @@ #define BOOT_DEVICE_MMC1 5 #define BOOT_DEVICE_MMC2 6 #define BOOT_DEVICE_MMC2_2 7 +#define BOOT_DEVICE_SPI 10 #define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 #define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2_2 diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 61fee9f..3a998cc 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -266,6 +266,7 @@ struct prcm_regs { u32 cm_l4per_mmcsd4_clkctrl; u32 cm_l4per_msprohg_clkctrl; u32 cm_l4per_slimbus2_clkctrl; + u32 cm_l4per_qspi_clkctrl; u32 cm_l4per_uart1_clkctrl; u32 cm_l4per_uart2_clkctrl; u32 cm_l4per_uart3_clkctrl; |