diff options
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/cpu/pxa/start.S | 1 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-pxa/macro.h | 328 |
2 files changed, 0 insertions, 329 deletions
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index bf8510e..f15a43a 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -33,7 +33,6 @@ #include <config.h> #include <version.h> #include <asm/arch/pxa-regs.h> -#include <asm/arch/macro.h> /* takes care the CP15 update has taken place */ .macro CPWAIT reg diff --git a/arch/arm/include/asm/arch-pxa/macro.h b/arch/arm/include/asm/arch-pxa/macro.h deleted file mode 100644 index 85958dd..0000000 --- a/arch/arm/include/asm/arch-pxa/macro.h +++ /dev/null @@ -1,328 +0,0 @@ -/* - * arch/arm/include/asm/arch-pxa/macro.h - * - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_PXA_MACRO_H__ -#define __ASM_ARCH_PXA_MACRO_H__ -#ifdef __ASSEMBLY__ - -#include <asm/macro.h> -#include <asm/arch/pxa-regs.h> - -/* - * This macro performs a 32bit write to a memory location and makes sure the - * write operation really happened by performing a read back. - * - * Clobbered regs: r4, r5 - */ -.macro write32rb addr, data - ldr r4, =\addr - ldr r5, =\data - str r5, [r4] - ldr r5, [r4] -.endm - -/* - * This macro waits according to OSCR incrementation - * - * Clobbered regs: r4, r5, r6 - */ -.macro pxa_wait_ticks ticks - ldr r4, =OSCR - mov r5, #0 - str r5, [r4] - ldr r5, =\ticks -1: - ldr r6, [r4] - cmp r5, r6 - bgt 1b -.endm - -/* - * This macro sets up the GPIO pins of the PXA2xx/PXA3xx CPU - * - * Clobbered regs: r4, r5 - */ -.macro pxa_gpio_setup - write32 GPSR0, CONFIG_SYS_GPSR0_VAL - write32 GPSR1, CONFIG_SYS_GPSR1_VAL - write32 GPSR2, CONFIG_SYS_GPSR2_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GPSR3, CONFIG_SYS_GPSR3_VAL -#endif - - write32 GPCR0, CONFIG_SYS_GPCR0_VAL - write32 GPCR1, CONFIG_SYS_GPCR1_VAL - write32 GPCR2, CONFIG_SYS_GPCR2_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GPCR3, CONFIG_SYS_GPCR3_VAL -#endif - - write32 GPDR0, CONFIG_SYS_GPDR0_VAL - write32 GPDR1, CONFIG_SYS_GPDR1_VAL - write32 GPDR2, CONFIG_SYS_GPDR2_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GPDR3, CONFIG_SYS_GPDR3_VAL -#endif - - write32 GAFR0_L, CONFIG_SYS_GAFR0_L_VAL - write32 GAFR0_U, CONFIG_SYS_GAFR0_U_VAL - write32 GAFR1_L, CONFIG_SYS_GAFR1_L_VAL - write32 GAFR1_U, CONFIG_SYS_GAFR1_U_VAL - write32 GAFR2_L, CONFIG_SYS_GAFR2_L_VAL - write32 GAFR2_U, CONFIG_SYS_GAFR2_U_VAL -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 GAFR3_L, CONFIG_SYS_GAFR3_L_VAL - write32 GAFR3_U, CONFIG_SYS_GAFR3_U_VAL -#endif - - write32 PSSR, CONFIG_SYS_PSSR_VAL -.endm - -/* - * This macro sets up the Memory controller of the PXA2xx CPU - * - * WARNING: This macro uses internally r3 and r7 regs for MEMC_BASE - * and CONFIG_SYS_MDREFR_VAL correspondingly. Please do not - * use this regs for other purpose inside this macro. - * - * Clobbered regs: r3, r4, r5, r6, r7 - */ -.macro pxa_mem_setup - /* This comes handy when setting MDREFR */ - ldr r3, =MEMC_BASE - - /* - * 1) Initialize Asynchronous static memory controller - */ - - /* MSC0: nCS(0,1) */ - write32rb (MEMC_BASE + MSC0_OFFSET), CONFIG_SYS_MSC0_VAL - /* MSC1: nCS(2,3) */ - write32rb (MEMC_BASE + MSC1_OFFSET), CONFIG_SYS_MSC1_VAL - /* MSC2: nCS(4,5) */ - write32rb (MEMC_BASE + MSC2_OFFSET), CONFIG_SYS_MSC2_VAL - - /* - * 2) Initialize Card Interface - */ - - /* MECR: Memory Expansion Card Register */ - write32rb (MEMC_BASE + MECR_OFFSET), CONFIG_SYS_MECR_VAL - /* MCMEM0: Card Interface slot 0 timing */ - write32rb (MEMC_BASE + MCMEM0_OFFSET), CONFIG_SYS_MCMEM0_VAL - /* MCMEM1: Card Interface slot 1 timing */ - write32rb (MEMC_BASE + MCMEM1_OFFSET), CONFIG_SYS_MCMEM1_VAL - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - write32rb (MEMC_BASE + MCATT0_OFFSET), CONFIG_SYS_MCATT0_VAL - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - write32rb (MEMC_BASE + MCATT1_OFFSET), CONFIG_SYS_MCATT1_VAL - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - write32rb (MEMC_BASE + MCIO0_OFFSET), CONFIG_SYS_MCIO0_VAL - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - write32rb (MEMC_BASE + MCIO1_OFFSET), CONFIG_SYS_MCIO1_VAL - - /* - * 3) Configure Fly-By DMA register - */ - - write32rb (MEMC_BASE + FLYCNFG_OFFSET), CONFIG_SYS_FLYCNFG_VAL - - /* - * 4) Initialize Timing for Sync Memory (SDCLK0) - */ - - /* - * Before accessing MDREFR we need a valid DRI field, so we set - * this to power on defaults + DRI field. - */ - ldr r5, [r3, #MDREFR_OFFSET] - bic r5, r5, #0x0ff - bic r5, r5, #0xf00 /* MDREFR user config with zeroed DRI */ - - ldr r4, =CONFIG_SYS_MDREFR_VAL - mov r7, r4 - lsl r4, #20 - lsr r4, #20 /* Get a valid DRI field */ - - orr r5, r5, r4 /* MDREFR user config with correct DRI */ - - orr r5, #MDREFR_K0RUN - orr r5, #MDREFR_SLFRSH - bic r5, #MDREFR_APD - bic r5, #MDREFR_E1PIN - - str r5, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] - - /* - * 5) Initialize Synchronous Static Memory (Flash/Peripherals) - */ - - /* Initialize SXCNFG register. Assert the enable bits. - * - * Write SXMRS to cause an MRS command to all enabled banks of - * synchronous static memory. Note that SXLCR need not be written - * at this time. - */ - write32rb (MEMC_BASE + SXCNFG_OFFSET), CONFIG_SYS_SXCNFG_VAL - - /* - * 6) Initialize SDRAM - */ - - bic r7, #MDREFR_SLFRSH - str r7, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] - - orr r7, #MDREFR_E1PIN - str r7, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] - - /* - * 7) Write MDCNFG with MDCNFG:DEx deasserted (set to 0), to configure - * but not enable each SDRAM partition pair. - */ - - /* Fetch platform value of MDCNFG */ - ldr r4, =CONFIG_SYS_MDCNFG_VAL - /* Disable all sdram banks */ - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) - /* Write initial value of MDCNFG, w/o enabling sdram banks */ - str r4, [r3, #MDCNFG_OFFSET] - ldr r4, [r3, #MDCNFG_OFFSET] - - /* Wait for the clock to the SDRAMs to stabilize, 100..200 usec. */ - pxa_wait_ticks 0x300 - - /* - * 8) Trigger a number (usually 8) refresh cycles by attempting - * non-burst read or write accesses to disabled SDRAM, as commonly - * specified in the power up sequence documented in SDRAM data - * sheets. The address(es) used for this purpose must not be - * cacheable. - */ - - ldr r4, =CONFIG_SYS_DRAM_BASE -.rept 9 - str r5, [r4] -.endr - - /* - * 9) Write MDCNFG with enable bits asserted (MDCNFG:DEx set to 1). - */ - - ldr r5, =CONFIG_SYS_MDCNFG_VAL - ldr r4, =(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3) - and r5, r5, r4 - ldr r4, [r3, #MDCNFG_OFFSET] - orr r4, r4, r5 - str r4, [r3, #MDCNFG_OFFSET] - ldr r4, [r3, #MDCNFG_OFFSET] - - /* - * 10) Write MDMRS. - */ - - ldr r4, =CONFIG_SYS_MDMRS_VAL - str r4, [r3, #MDMRS_OFFSET] - ldr r4, [r3, #MDMRS_OFFSET] - - /* - * 11) Enable APD - */ - - ldr r4, [r3, #MDREFR_OFFSET] - and r7, r7, #MDREFR_APD - orr r4, r4, r7 - str r4, [r3, #MDREFR_OFFSET] - ldr r4, [r3, #MDREFR_OFFSET] -.endm - -/* - * This macro tests if the CPU woke up from sleep and eventually resumes - * - * Clobbered regs: r4, r5 - */ -.macro pxa_wakeup - ldr r4, =RCSR - ldr r5, [r4] - and r5, r5, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR) - str r5, [r4] - teq r5, #RCSR_SMR - - bne pxa_wakeup_exit - - ldr r4, =PSSR - mov r5, #PSSR_PH - str r5, [r4] - - ldr r4, =PSPR - ldr pc, [r4] -pxa_wakeup_exit: -.endm - -/* - * This macro disables all interupts on PXA2xx/PXA3xx CPU - * - * Clobbered regs: r4, r5 - */ -.macro pxa_intr_setup - write32 ICLR, 0 - write32 ICMR, 0 -#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) - write32 ICLR2, 0 - write32 ICMR2, 0 -#endif -.endm - -/* - * This macro configures clock on PXA2xx/PXA3xx CPU - * - * Clobbered regs: r4, r5 - */ -.macro pxa_clock_setup - /* Disable the peripheral clocks, and set the core clock frequency */ - - /* Turn Off ALL on-chip peripheral clocks for re-configuration */ - write32 CKEN, CONFIG_SYS_CKEN - - /* Write CCCR */ - write32 CCCR, CONFIG_SYS_CCCR - -#ifdef CONFIG_RTC - /* enable the 32Khz oscillator for RTC and PowerManager */ - write32 OSCC, #OSCC_OON - ldr r4, =OSCC - - /* Spin here until OSCC.OOK get set, meaning the PLL has settled. */ -2: - ldr r5, [r4] - ands r5, r5, #1 - beq 2b -#endif -.endm - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARCH_PXA_MACRO_H__ */ |