diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/Kconfig | 6 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 29 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/mx6/ddr.c | 7 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-mx6/mx6-ddr.h | 1 |
4 files changed, 19 insertions, 24 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5f21b59..2167e29 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -535,6 +535,11 @@ config TARGET_MX6SABRESD select DM select DM_THERMAL +config TARGET_MX6CUBOXI + bool "Support Solid-run mx6 boards" + select CPU_V7 + select SUPPORT_SPL + config TARGET_MX6SLEVK bool "Support mx6slevk" select CPU_V7 @@ -922,6 +927,7 @@ source "board/siemens/draco/Kconfig" source "board/siemens/pxm2/Kconfig" source "board/siemens/rut/Kconfig" source "board/silica/pengwyn/Kconfig" +source "board/solidrun/mx6cuboxi/Kconfig" source "board/solidrun/hummingboard/Kconfig" source "board/spear/spear300/Kconfig" source "board/spear/spear310/Kconfig" diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index d7956e5..eb8669b 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -49,13 +49,6 @@ static const iomux_cfg_t iomux_boot[] = { MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD, MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD, MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, -#elif defined(CONFIG_MX28) - MX28_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD, - MX28_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD, - MX28_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD, - MX28_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD, - MX28_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD, - MX28_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD, #endif }; @@ -65,10 +58,10 @@ static uint8_t mxs_get_bootmode_index(void) int i; uint8_t masked; +#if defined(CONFIG_MX23) /* Setup IOMUX of bootmode pads to GPIO */ mxs_iomux_setup_multiple_pads(iomux_boot, ARRAY_SIZE(iomux_boot)); -#if defined(CONFIG_MX23) /* Setup bootmode pins as GPIO input */ gpio_direction_input(MX23_PAD_LCD_D00__GPIO_1_0); gpio_direction_input(MX23_PAD_LCD_D01__GPIO_1_1); @@ -83,21 +76,11 @@ static uint8_t mxs_get_bootmode_index(void) bootmode |= (gpio_get_value(MX23_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3; bootmode |= (gpio_get_value(MX23_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; #elif defined(CONFIG_MX28) - /* Setup bootmode pins as GPIO input */ - gpio_direction_input(MX28_PAD_LCD_D00__GPIO_1_0); - gpio_direction_input(MX28_PAD_LCD_D01__GPIO_1_1); - gpio_direction_input(MX28_PAD_LCD_D02__GPIO_1_2); - gpio_direction_input(MX28_PAD_LCD_D03__GPIO_1_3); - gpio_direction_input(MX28_PAD_LCD_D04__GPIO_1_4); - gpio_direction_input(MX28_PAD_LCD_D05__GPIO_1_5); - - /* Read bootmode pads */ - bootmode |= (gpio_get_value(MX28_PAD_LCD_D00__GPIO_1_0) ? 1 : 0) << 0; - bootmode |= (gpio_get_value(MX28_PAD_LCD_D01__GPIO_1_1) ? 1 : 0) << 1; - bootmode |= (gpio_get_value(MX28_PAD_LCD_D02__GPIO_1_2) ? 1 : 0) << 2; - bootmode |= (gpio_get_value(MX28_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3; - bootmode |= (gpio_get_value(MX28_PAD_LCD_D04__GPIO_1_4) ? 1 : 0) << 4; - bootmode |= (gpio_get_value(MX28_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5; + /* The global boot mode will be detected by ROM code and its value + * is stored at the fixed address 0x00019BF0 in OCRAM. + */ +#define GLOBAL_BOOT_MODE_ADDR 0x00019BF0 + bootmode = __raw_readl(GLOBAL_BOOT_MODE_ADDR); #endif for (i = 0; i < ARRAY_SIZE(mxs_boot_modes); i++) { diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c index fef2231..653d58e 100644 --- a/arch/arm/cpu/armv7/mx6/ddr.c +++ b/arch/arm/cpu/armv7/mx6/ddr.c @@ -514,17 +514,21 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo, /* MR2 */ val = (sysinfo->rtt_wr & 3) << 9 | (ddr3_cfg->SRT & 1) << 7 | ((tcwl - 3) & 3) << 3; + debug("MR2 CS%d: 0x%08x\n", cs, (u32)MR(val, 2, 3, cs)); mmdc0->mdscr = MR(val, 2, 3, cs); /* MR3 */ + debug("MR3 CS%d: 0x%08x\n", cs, (u32)MR(0, 3, 3, cs)); mmdc0->mdscr = MR(0, 3, 3, cs); /* MR1 */ val = ((sysinfo->rtt_nom & 1) ? 1 : 0) << 2 | ((sysinfo->rtt_nom & 2) ? 1 : 0) << 6; + debug("MR1 CS%d: 0x%08x\n", cs, (u32)MR(val, 1, 3, cs)); mmdc0->mdscr = MR(val, 1, 3, cs); /* MR0 */ val = ((tcl - 1) << 4) | /* CAS */ (1 << 8) | /* DLL Reset */ ((twr - 3) << 9); /* Write Recovery */ + debug("MR0 CS%d: 0x%08x\n", cs, (u32)MR(val, 0, 3, cs)); mmdc0->mdscr = MR(val, 0, 3, cs); /* ZQ calibration */ val = (1 << 10); @@ -535,10 +539,11 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo, mmdc0->mdpdc = (tcke & 0x7) << 16 | 5 << 12 | /* PWDT_1: 256 cycles */ 5 << 8 | /* PWDT_0: 256 cycles */ - 1 << 7 | /* SLOW_PD */ 1 << 6 | /* BOTH_CS_PD */ (tcksrx & 0x7) << 3 | (tcksre & 0x7); + if (!sysinfo->pd_fast_exit) + mmdc0->mdpdc |= (1 << 7); /* SLOW_PD */ mmdc0->mapsr = 0x00001006; /* ADOPT power down enabled */ /* Step 11: Configure ZQ calibration: one-time and periodic 1ms */ diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h index 8e0d7d1..c49aa62 100644 --- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h +++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h @@ -250,6 +250,7 @@ struct mx6_ddr_sysinfo { u8 mif3_mode; /* Command prediction working mode */ u8 rst_to_cke; /* Time from SDE enable to CKE rise */ u8 sde_to_rst; /* Time from SDE enable until DDR reset# is high */ + u8 pd_fast_exit;/* enable precharge powerdown fast-exit */ }; /* |