summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig22
-rw-r--r--arch/arm/cpu/arm926ejs/at91/Makefile1
-rw-r--r--arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c189
-rw-r--r--arch/arm/cpu/arm926ejs/cpu.c2
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/spl.c17
-rw-r--r--arch/arm/cpu/arm926ejs/kirkwood/cpu.c11
-rw-r--r--arch/arm/cpu/armv7/am33xx/board.c11
-rw-r--r--arch/arm/cpu/armv7/armada-xp/Makefile2
-rw-r--r--arch/arm/cpu/armv7/armada-xp/lowlevel_spl.S62
-rw-r--r--arch/arm/cpu/armv7/armada-xp/spl.c38
-rw-r--r--arch/arm/cpu/armv7/at91/clock.c8
-rw-r--r--arch/arm/cpu/armv7/at91/sama5d4_devices.c63
-rw-r--r--arch/arm/cpu/armv7/cpu.c2
-rw-r--r--arch/arm/cpu/armv7/exynos/pinmux.c27
-rw-r--r--arch/arm/cpu/armv7/ls102xa/fdt.c49
-rw-r--r--arch/arm/cpu/armv7/omap-common/boot-common.c10
-rw-r--r--arch/arm/cpu/armv7/omap-common/clocks-common.c83
-rw-r--r--arch/arm/cpu/armv7/omap-common/hwinit-common.c11
-rw-r--r--arch/arm/cpu/armv7/omap3/board.c9
-rw-r--r--arch/arm/cpu/armv7/omap3/clock.c9
-rw-r--r--arch/arm/cpu/armv7/omap3/sdrc.c6
-rw-r--r--arch/arm/cpu/armv7/omap5/hw_data.c43
-rw-r--r--arch/arm/cpu/armv7/start.S6
-rw-r--r--arch/arm/cpu/armv7/sunxi/Makefile3
-rw-r--r--arch/arm/cpu/armv7/sunxi/board.c102
-rw-r--r--arch/arm/cpu/armv7/sunxi/clock_sun6i.c5
-rw-r--r--arch/arm/cpu/armv7/sunxi/clock_sun9i.c68
-rw-r--r--arch/arm/cpu/armv7/sunxi/rsb.c22
-rw-r--r--arch/arm/cpu/armv7/uniphier/Kconfig11
-rw-r--r--arch/arm/cpu/armv7/uniphier/Makefile27
-rw-r--r--arch/arm/cpu/armv7/uniphier/board_early_init_f.c22
-rw-r--r--arch/arm/cpu/armv7/uniphier/board_postclk_init.c47
-rw-r--r--arch/arm/cpu/armv7/uniphier/cmd_pinmon.c15
-rw-r--r--arch/arm/cpu/armv7/uniphier/dram_init.c23
-rw-r--r--arch/arm/cpu/armv7/uniphier/init_page_table.S26
-rw-r--r--arch/arm/cpu/armv7/uniphier/init_page_table.c1069
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile14
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c6
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c2
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c8
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile13
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-pro4/board_info.c16
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c6
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c6
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c4
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c8
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile14
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-sld8/board_info.c16
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c9
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c6
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c8
-rw-r--r--arch/arm/cpu/armv7/uniphier/print_misc_info.c (renamed from arch/arm/cpu/armv7/uniphier/ph1-ld4/board_info.c)7
-rw-r--r--arch/arm/cpu/armv7/uniphier/spl.c52
-rw-r--r--arch/arm/cpu/armv7/virt-v7.c9
-rw-r--r--arch/arm/cpu/armv7/zynq/Makefile1
-rw-r--r--arch/arm/cpu/armv7/zynq/config.mk7
-rw-r--r--arch/arm/cpu/armv7/zynq/cpu.c4
-rw-r--r--arch/arm/cpu/armv7/zynq/ddrc.c2
-rw-r--r--arch/arm/cpu/armv7/zynq/lowlevel_init.S26
-rw-r--r--arch/arm/cpu/armv7/zynq/slcr.c2
-rw-r--r--arch/arm/cpu/armv7/zynq/spl.c12
-rw-r--r--arch/arm/cpu/at91-common/Makefile1
-rw-r--r--arch/arm/cpu/at91-common/mpddrc.c2
-rw-r--r--arch/arm/cpu/at91-common/spl.c4
-rw-r--r--arch/arm/cpu/at91-common/spl_atmel.c16
-rw-r--r--arch/arm/cpu/tegra20-common/pmu.c2
-rw-r--r--arch/arm/dts/exynos4.dtsi31
-rw-r--r--arch/arm/dts/exynos4210-origen.dts2
-rw-r--r--arch/arm/dts/exynos4210-trats.dts4
-rw-r--r--arch/arm/dts/exynos4210-universal_c210.dts12
-rw-r--r--arch/arm/dts/exynos4412-odroid.dts9
-rw-r--r--arch/arm/dts/exynos4412-trats2.dts6
-rw-r--r--arch/arm/dts/exynos5.dtsi4
-rw-r--r--arch/arm/dts/exynos5250-arndale.dts8
-rw-r--r--arch/arm/dts/exynos5250-smdk5250.dts2
-rw-r--r--arch/arm/dts/exynos5250-snow.dts11
-rw-r--r--arch/arm/dts/exynos5420-peach-pit.dts8
-rw-r--r--arch/arm/dts/exynos5422-odroidxu3.dts2
-rw-r--r--arch/arm/dts/exynos5800-peach-pi.dts10
-rw-r--r--arch/arm/dts/tegra114-dalmore.dts5
-rw-r--r--arch/arm/dts/tegra124-jetson-tk1.dts9
-rw-r--r--arch/arm/dts/tegra124-venice2.dts9
-rw-r--r--arch/arm/dts/tegra20-colibri_t20_iris.dts10
-rw-r--r--arch/arm/dts/tegra20-harmony.dts28
-rw-r--r--arch/arm/dts/tegra20-medcom-wide.dts9
-rw-r--r--arch/arm/dts/tegra20-paz00.dts18
-rw-r--r--arch/arm/dts/tegra20-seaboard.dts22
-rw-r--r--arch/arm/dts/tegra20-tamonten.dtsi9
-rw-r--r--arch/arm/dts/tegra20-tec.dts9
-rw-r--r--arch/arm/dts/tegra20-trimslice.dts8
-rw-r--r--arch/arm/dts/tegra20-ventana.dts18
-rw-r--r--arch/arm/dts/tegra20-whistler.dts2
-rw-r--r--arch/arm/dts/tegra30-apalis.dts10
-rw-r--r--arch/arm/dts/tegra30-beaver.dts10
-rw-r--r--arch/arm/dts/tegra30-cardhu.dts8
-rw-r--r--arch/arm/dts/tegra30-colibri.dts6
-rw-r--r--arch/arm/dts/tegra30-tamonten.dtsi4
-rw-r--r--arch/arm/dts/uniphier-ph1-ld4-ref.dts7
-rw-r--r--arch/arm/dts/uniphier-ph1-pro4-ref.dts7
-rw-r--r--arch/arm/dts/uniphier-ph1-sld3-ref.dts7
-rw-r--r--arch/arm/dts/uniphier-ph1-sld8-ref.dts7
-rw-r--r--arch/arm/dts/uniphier-ref-daughter.dtsi16
-rw-r--r--arch/arm/include/asm/arch-armada-xp/config.h4
-rw-r--r--arch/arm/include/asm/arch-armada-xp/cpu.h16
-rw-r--r--arch/arm/include/asm/arch-at91/at91_common.h1
-rw-r--r--arch/arm/include/asm/arch-at91/at91_pmc.h9
-rw-r--r--arch/arm/include/asm/arch-at91/at91_rstc.h2
-rw-r--r--arch/arm/include/asm/arch-at91/at91cap9.h78
-rw-r--r--arch/arm/include/asm/arch-at91/at91cap9_matrix.h129
-rw-r--r--arch/arm/include/asm/arch-at91/at91sam9_matrix.h2
-rw-r--r--arch/arm/include/asm/arch-at91/atmel_usba_udc.h2
-rw-r--r--arch/arm/include/asm/arch-at91/hardware.h2
-rw-r--r--arch/arm/include/asm/arch-at91/sama5_matrix.h37
-rw-r--r--arch/arm/include/asm/arch-at91/sama5_sfr.h38
-rw-r--r--arch/arm/include/asm/arch-at91/sama5d4.h2
-rw-r--r--arch/arm/include/asm/arch-exynos/pinmux.h3
-rw-r--r--arch/arm/include/asm/arch-ls102xa/config.h5
-rw-r--r--arch/arm/include/asm/arch-ls102xa/gpio.h (renamed from arch/arm/include/asm/arch-uniphier/gpio.h)11
-rw-r--r--arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h4
-rw-r--r--arch/arm/include/asm/arch-omap3/mem.h43
-rw-r--r--arch/arm/include/asm/arch-omap3/mmc_host_def.h1
-rw-r--r--arch/arm/include/asm/arch-omap3/mux.h51
-rw-r--r--arch/arm/include/asm/arch-omap3/sys_proto.h1
-rw-r--r--arch/arm/include/asm/arch-omap5/clock.h20
-rw-r--r--arch/arm/include/asm/arch-pantheon/gpio.h0
-rw-r--r--arch/arm/include/asm/arch-rmobile/r8a7790.h6
-rw-r--r--arch/arm/include/asm/arch-rmobile/r8a7791.h5
-rw-r--r--arch/arm/include/asm/arch-rmobile/r8a7793.h5
-rw-r--r--arch/arm/include/asm/arch-rmobile/r8a7794.h5
-rw-r--r--arch/arm/include/asm/arch-rmobile/rcar-base.h3
-rw-r--r--arch/arm/include/asm/arch-rmobile/sh_sdhi.h168
-rw-r--r--arch/arm/include/asm/arch-sunxi/clock.h6
-rw-r--r--arch/arm/include/asm/arch-sunxi/clock_sun4i.h13
-rw-r--r--arch/arm/include/asm/arch-sunxi/clock_sun6i.h7
-rw-r--r--arch/arm/include/asm/arch-sunxi/clock_sun9i.h139
-rw-r--r--arch/arm/include/asm/arch-sunxi/cpu.h148
-rw-r--r--arch/arm/include/asm/arch-sunxi/cpu_sun4i.h154
-rw-r--r--arch/arm/include/asm/arch-sunxi/cpu_sun9i.h109
-rw-r--r--arch/arm/include/asm/arch-sunxi/display.h120
-rw-r--r--arch/arm/include/asm/arch-sunxi/dram_sun4i.h2
-rw-r--r--arch/arm/include/asm/arch-sunxi/gpio.h9
-rw-r--r--arch/arm/include/asm/arch-sunxi/mmc.h8
-rw-r--r--arch/arm/include/asm/arch-sunxi/rsb.h4
-rw-r--r--arch/arm/include/asm/arch-sunxi/usbc.h2
-rw-r--r--arch/arm/include/asm/arch-tegra/tegra_mmc.h7
-rw-r--r--arch/arm/include/asm/arch-tegra20/display.h9
-rw-r--r--arch/arm/include/asm/arch-uniphier/boot-device.h2
-rw-r--r--arch/arm/include/asm/arch-uniphier/ddrphy-regs.h2
-rw-r--r--arch/arm/include/asm/arch-uniphier/sg-regs.h109
-rw-r--r--arch/arm/include/asm/arch-zynq/gpio.h15
-rw-r--r--arch/arm/include/asm/arch-zynq/hardware.h5
-rw-r--r--arch/arm/include/asm/arch-zynq/sys_proto.h2
-rw-r--r--arch/arm/include/asm/u-boot-arm.h1
-rw-r--r--arch/arm/lib/cache.c2
-rw-r--r--arch/arm/lib/spl.c7
-rw-r--r--arch/arm/mvebu-common/Makefile2
-rw-r--r--arch/arm/mvebu-common/serdes/Makefile6
-rw-r--r--arch/arm/mvebu-common/serdes/board_env_spec.h262
-rw-r--r--arch/arm/mvebu-common/serdes/high_speed_env_lib.c1572
-rw-r--r--arch/arm/mvebu-common/serdes/high_speed_env_spec.c185
-rw-r--r--arch/arm/mvebu-common/serdes/high_speed_env_spec.h87
-rw-r--r--arch/arm/mvebu-common/u-boot-spl.lds57
162 files changed, 4267 insertions, 2190 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7df6221..1f1ccad 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -51,6 +51,13 @@ config SYS_CPU
default "sa1100" if CPU_SA1100
default "armv8" if ARM64
+config SEMIHOSTING
+ bool "support boot from semihosting"
+ help
+ In emulated environments, semihosting is a way for
+ the hosted environment to call out to the emulator to
+ retrieve files from the host machine.
+
choice
prompt "Target select"
@@ -229,10 +236,12 @@ config KIRKWOOD
config TARGET_DB_MV784MP_GP
bool "Support db-mv784mp-gp"
select CPU_V7
+ select SUPPORT_SPL
config TARGET_MAXBCM
bool "Support maxbcm"
select CPU_V7
+ select SUPPORT_SPL
config TARGET_DEVKIT3250
bool "Support devkit3250"
@@ -518,10 +527,12 @@ config TARGET_SAMA5D3XEK
config TARGET_SAMA5D4_XPLAINED
bool "Support sama5d4_xplained"
select CPU_V7
+ select SUPPORT_SPL
config TARGET_SAMA5D4EK
bool "Support sama5d4ek"
select CPU_V7
+ select SUPPORT_SPL
config TARGET_BCM28155_AP
bool "Support bcm28155_ap"
@@ -732,10 +743,19 @@ config TEGRA
select CPU_ARM720T if SPL_BUILD
select CPU_V7 if !SPL_BUILD
-config TARGET_VEXPRESS_AEMV8A
+config TARGET_VEXPRESS64_AEMV8A
bool "Support vexpress_aemv8a"
select ARM64
+config TARGET_VEXPRESS64_BASE_FVP
+ bool "Support Versatile Express ARMv8a FVP BASE model"
+ select ARM64
+ select SEMIHOSTING
+
+config TARGET_VEXPRESS64_JUNO
+ bool "Support Versatile Express Juno Development Platform"
+ select ARM64
+
config TARGET_LS2085A_EMU
bool "Support ls2085a_emu"
select ARM64
diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile
index 698a28d..ddc323f 100644
--- a/arch/arm/cpu/arm926ejs/at91/Makefile
+++ b/arch/arm/cpu/arm926ejs/at91/Makefile
@@ -5,7 +5,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_AT91CAP9) += at91cap9_devices.o
obj-$(CONFIG_AT91SAM9260) += at91sam9260_devices.o
obj-$(CONFIG_AT91SAM9G20) += at91sam9260_devices.o
obj-$(CONFIG_AT91SAM9XE) += at91sam9260_devices.o
diff --git a/arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c b/arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c
deleted file mode 100644
index 16eeca7..0000000
--- a/arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * (C) Copyright 2009
- * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
- * esd electronic system design gmbh <www.esd.eu>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_serial0_hw_init(void)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- at91_set_a_periph(AT91_PIO_PORTA, 22, 1); /* TXD0 */
- at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* RXD0 */
- writel(1 << AT91CAP9_ID_US0, &pmc->pcer);
-}
-
-void at91_serial1_hw_init(void)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */
- at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* RXD1 */
- writel(1 << AT91CAP9_ID_US1, &pmc->pcer);
-}
-
-void at91_serial2_hw_init(void)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */
- at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* RXD2 */
- writel(1 << AT91CAP9_ID_US2, &pmc->pcer);
-}
-
-void at91_serial3_hw_init(void)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* DRXD */
- at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */
- writel(1 << AT91_ID_SYS, &pmc->pcer);
-}
-
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
- at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
- at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
- at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3 /* DBGU */
- at91_serial3_hw_init();
-#endif
-}
-
-#ifdef CONFIG_HAS_DATAFLASH
-void at91_spi0_hw_init(unsigned long cs_mask)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- at91_set_b_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */
- at91_set_b_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */
- at91_set_b_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */
-
- /* Enable clock */
- writel(1 << AT91CAP9_ID_SPI0, &pmc->pcer);
-
- if (cs_mask & (1 << 0)) {
- at91_set_b_periph(AT91_PIO_PORTA, 5, 1);
- }
- if (cs_mask & (1 << 1)) {
- at91_set_b_periph(AT91_PIO_PORTA, 3, 1);
- }
- if (cs_mask & (1 << 2)) {
- at91_set_b_periph(AT91_PIO_PORTD, 0, 1);
- }
- if (cs_mask & (1 << 3)) {
- at91_set_b_periph(AT91_PIO_PORTD, 1, 1);
- }
- if (cs_mask & (1 << 4)) {
- at91_set_pio_output(AT91_PIO_PORTA, 5, 1);
- }
- if (cs_mask & (1 << 5)) {
- at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
- }
- if (cs_mask & (1 << 6)) {
- at91_set_pio_output(AT91_PIO_PORTD, 0, 1);
- }
- if (cs_mask & (1 << 7)) {
- at91_set_pio_output(AT91_PIO_PORTD, 1, 1);
- }
-}
-
-void at91_spi1_hw_init(unsigned long cs_mask)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* SPI1_MISO */
- at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* SPI1_MOSI */
- at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* SPI1_SPCK */
-
- /* Enable clock */
- writel(1 << AT91CAP9_ID_SPI1, &pmc->pcer);
-
- if (cs_mask & (1 << 0)) {
- at91_set_a_periph(AT91_PIO_PORTB, 15, 1);
- }
- if (cs_mask & (1 << 1)) {
- at91_set_a_periph(AT91_PIO_PORTB, 16, 1);
- }
- if (cs_mask & (1 << 2)) {
- at91_set_a_periph(AT91_PIO_PORTB, 17, 1);
- }
- if (cs_mask & (1 << 3)) {
- at91_set_a_periph(AT91_PIO_PORTB, 18, 1);
- }
- if (cs_mask & (1 << 4)) {
- at91_set_pio_output(AT91_PIO_PORTB, 15, 1);
- }
- if (cs_mask & (1 << 5)) {
- at91_set_pio_output(AT91_PIO_PORTB, 16, 1);
- }
- if (cs_mask & (1 << 6)) {
- at91_set_pio_output(AT91_PIO_PORTB, 17, 1);
- }
- if (cs_mask & (1 << 7)) {
- at91_set_pio_output(AT91_PIO_PORTB, 18, 1);
- }
-
-}
-#endif
-
-#ifdef CONFIG_MACB
-void at91_macb_hw_init(void)
-{
- at91_set_a_periph(AT91_PIO_PORTB, 21, 0); /* ETXCK_EREFCK */
- at91_set_a_periph(AT91_PIO_PORTB, 22, 0); /* ERXDV */
- at91_set_a_periph(AT91_PIO_PORTB, 25, 0); /* ERX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 26, 0); /* ERX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 27, 0); /* ERXER */
- at91_set_a_periph(AT91_PIO_PORTB, 28, 0); /* ETXEN */
- at91_set_a_periph(AT91_PIO_PORTB, 23, 0); /* ETX0 */
- at91_set_a_periph(AT91_PIO_PORTB, 24, 0); /* ETX1 */
- at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* EMDIO */
- at91_set_a_periph(AT91_PIO_PORTB, 29, 0); /* EMDC */
-
-#ifndef CONFIG_RMII
- at91_set_b_periph(AT91_PIO_PORTC, 25, 0); /* ECRS */
- at91_set_b_periph(AT91_PIO_PORTC, 26, 0); /* ECOL */
- at91_set_b_periph(AT91_PIO_PORTC, 22, 0); /* ERX2 */
- at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* ERX3 */
- at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ERXCK */
- at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ETX2 */
- at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ETX3 */
- at91_set_b_periph(AT91_PIO_PORTC, 24, 0); /* ETXER */
-#endif
-}
-#endif
-
-#ifdef CONFIG_AT91_CAN
-void at91_can_hw_init(void)
-{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
- at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* CAN_TX */
- at91_set_a_periph(AT91_PIO_PORTA, 13, 1); /* CAN_RX */
-
- /* Enable clock */
- writel(1 << AT91CAP9_ID_CAN, &pmc->pcer);
-}
-#endif
diff --git a/arch/arm/cpu/arm926ejs/cpu.c b/arch/arm/cpu/arm926ejs/cpu.c
index e37e87b..a90ce30 100644
--- a/arch/arm/cpu/arm926ejs/cpu.c
+++ b/arch/arm/cpu/arm926ejs/cpu.c
@@ -45,7 +45,9 @@ int cleanup_before_linux (void)
/* flush I/D-cache */
static void cache_flush (void)
{
+#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
unsigned long i = 0;
asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+#endif
}
diff --git a/arch/arm/cpu/arm926ejs/davinci/spl.c b/arch/arm/cpu/arm926ejs/davinci/spl.c
index 59b304e..49349da 100644
--- a/arch/arm/cpu/arm926ejs/davinci/spl.c
+++ b/arch/arm/cpu/arm926ejs/davinci/spl.c
@@ -34,29 +34,14 @@ void putc(char c)
}
#endif /* CONFIG_SPL_LIBCOMMON_SUPPORT */
-void board_init_f(ulong dummy)
+void spl_board_init(void)
{
- /* First, setup our stack pointer. */
- asm volatile("mov sp, %0\n" : : "r"(CONFIG_SPL_STACK));
-
- /* Second, perform our low-level init. */
#ifdef CONFIG_SOC_DM365
dm36x_lowlevel_init(0);
#endif
#ifdef CONFIG_SOC_DA8XX
arch_cpu_init();
#endif
-
- /* Third, we clear the BSS. */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
- /* Finally, setup gd and move to the next step. */
- gd = &gdata;
- board_init_r(NULL, 0);
-}
-
-void spl_board_init(void)
-{
preloader_console_init();
}
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
index 9e412bb..4c9d3fd 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
+++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
@@ -181,7 +181,7 @@ static void kw_sysrst_check(void)
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
- char *rev;
+ char *rev = "??";
u16 devid = (readl(KW_REG_PCIE_DEVID) >> 16) & 0xffff;
u8 revid = readl(KW_REG_PCIE_REVID) & 0xff;
@@ -192,7 +192,13 @@ int print_cpuinfo(void)
switch (revid) {
case 0:
- rev = "Z0";
+ if (devid == 0x6281)
+ rev = "Z0";
+ else if (devid == 0x6282)
+ rev = "A0";
+ break;
+ case 1:
+ rev = "A1";
break;
case 2:
rev = "A0";
@@ -201,7 +207,6 @@ int print_cpuinfo(void)
rev = "A1";
break;
default:
- rev = "??";
break;
}
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index eaf09d1..81477aa 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -285,14 +285,6 @@ void s_init(void)
#ifdef CONFIG_NOR_BOOT
enable_norboot_pin_mux();
#endif
- /*
- * Save the boot parameters passed from romcode.
- * We cannot delay the saving further than this,
- * to prevent overwrites.
- */
-#ifdef CONFIG_SPL_BUILD
- save_omap_boot_params();
-#endif
watchdog_disable();
set_uart_mux_conf();
setup_clocks_for_console();
@@ -301,9 +293,6 @@ void s_init(void)
gd->baudrate = CONFIG_BAUDRATE;
serial_init();
gd->have_console = 1;
-#elif defined(CONFIG_SPL_BUILD)
- gd = &gdata;
- preloader_console_init();
#endif
#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
/* Enable RTC32K clock */
diff --git a/arch/arm/cpu/armv7/armada-xp/Makefile b/arch/arm/cpu/armv7/armada-xp/Makefile
index 885dcee..737159b 100644
--- a/arch/arm/cpu/armv7/armada-xp/Makefile
+++ b/arch/arm/cpu/armv7/armada-xp/Makefile
@@ -5,3 +5,5 @@
#
obj-y = cpu.o
+obj-$(CONFIG_SPL_BUILD) += spl.o
+obj-$(CONFIG_SPL_BUILD) += lowlevel_spl.o
diff --git a/arch/arm/cpu/armv7/armada-xp/lowlevel_spl.S b/arch/arm/cpu/armv7/armada-xp/lowlevel_spl.S
new file mode 100644
index 0000000..1febd7b
--- /dev/null
+++ b/arch/arm/cpu/armv7/armada-xp/lowlevel_spl.S
@@ -0,0 +1,62 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <version.h>
+#include <linux/linkage.h>
+
+ENTRY(save_boot_params)
+ bx lr
+ENDPROC(save_boot_params)
+
+/*
+ * cache_inv - invalidate Cache line
+ * r0 - dest
+ */
+ .global cache_inv
+ .type cache_inv, %function
+ cache_inv:
+
+ stmfd sp!, {r1-r12}
+
+ mcr p15, 0, r0, c7, c6, 1
+
+ ldmfd sp!, {r1-r12}
+ bx lr
+
+
+/*
+ * flush_l1_v6 - l1 cache clean invalidate
+ * r0 - dest
+ */
+ .global flush_l1_v6
+ .type flush_l1_v6, %function
+ flush_l1_v6:
+
+ stmfd sp!, {r1-r12}
+
+ mcr p15, 0, r0, c7, c10, 5 /* @ data memory barrier */
+ mcr p15, 0, r0, c7, c14, 1 /* @ clean & invalidate D line */
+ mcr p15, 0, r0, c7, c10, 4 /* @ data sync barrier */
+
+ ldmfd sp!, {r1-r12}
+ bx lr
+
+
+/*
+ * flush_l1_v7 - l1 cache clean invalidate
+ * r0 - dest
+ */
+ .global flush_l1_v7
+ .type flush_l1_v7, %function
+ flush_l1_v7:
+
+ stmfd sp!, {r1-r12}
+
+ dmb /* @data memory barrier */
+ mcr p15, 0, r0, c7, c14, 1 /* @ clean & invalidate D line */
+ dsb /* @data sync barrier */
+
+ ldmfd sp!, {r1-r12}
+ bx lr
diff --git a/arch/arm/cpu/armv7/armada-xp/spl.c b/arch/arm/cpu/armv7/armada-xp/spl.c
new file mode 100644
index 0000000..402e520
--- /dev/null
+++ b/arch/arm/cpu/armv7/armada-xp/spl.c
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u32 spl_boot_device(void)
+{
+ /* Right now only booting via SPI NOR flash is supported */
+ return BOOT_DEVICE_SPI;
+}
+
+void board_init_f(ulong dummy)
+{
+ /* Set global data pointer */
+ gd = &gdata;
+
+ /* Linux expects the internal registers to be at 0xf1000000 */
+ arch_cpu_init();
+
+ preloader_console_init();
+
+ /* First init the serdes PHY's */
+ serdes_phy_config();
+
+ /* Setup DDR */
+ ddr3_init();
+
+ board_init_r(NULL, 0);
+}
diff --git a/arch/arm/cpu/armv7/at91/clock.c b/arch/arm/cpu/armv7/at91/clock.c
index 2cdddb2..0bf453e 100644
--- a/arch/arm/cpu/armv7/at91/clock.c
+++ b/arch/arm/cpu/armv7/at91/clock.c
@@ -130,10 +130,18 @@ void at91_mck_init(u32 mckr)
AT91_PMC_MCKR_PRES_MASK |
AT91_PMC_MCKR_MDIV_MASK |
AT91_PMC_MCKR_PLLADIV_2);
+#ifdef CPU_HAS_H32MXDIV
+ tmp &= ~AT91_PMC_MCKR_H32MXDIV;
+#endif
+
tmp |= mckr & (AT91_PMC_MCKR_CSS_MASK |
AT91_PMC_MCKR_PRES_MASK |
AT91_PMC_MCKR_MDIV_MASK |
AT91_PMC_MCKR_PLLADIV_2);
+#ifdef CPU_HAS_H32MXDIV
+ tmp |= mckr & AT91_PMC_MCKR_H32MXDIV;
+#endif
+
writel(tmp, &pmc->mckr);
while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
diff --git a/arch/arm/cpu/armv7/at91/sama5d4_devices.c b/arch/arm/cpu/armv7/at91/sama5d4_devices.c
index 2708097..ef39cb7 100644
--- a/arch/arm/cpu/armv7/at91/sama5d4_devices.c
+++ b/arch/arm/cpu/armv7/at91/sama5d4_devices.c
@@ -6,6 +6,12 @@
*/
#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/sama5_matrix.h>
+#include <asm/arch/sama5_sfr.h>
#include <asm/arch/sama5d4.h>
char *get_cpu_name()
@@ -28,3 +34,60 @@ char *get_cpu_name()
else
return "Unknown CPU type";
}
+
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+void at91_udp_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ /* Enable UPLL clock */
+ writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr);
+ /* Enable UDPHS clock */
+ at91_periph_clk_enable(ATMEL_ID_UDPHS);
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+void matrix_init(void)
+{
+ struct atmel_matrix *h64mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX0;
+ struct atmel_matrix *h32mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX1;
+ int i;
+
+ /* Disable the write protect */
+ writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr);
+ writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr);
+
+ /* DDR port 1 ~ poart 7, slave number is: 4 ~ 10 */
+ for (i = 4; i <= 10; i++) {
+ writel(0x000f0f0f, &h64mx->ssr[i]);
+ writel(0x0000ffff, &h64mx->sassr[i]);
+ writel(0x0000000f, &h64mx->srtsr[i]);
+ }
+
+ /* CS3 */
+ writel(0x00c0c0c0, &h32mx->ssr[3]);
+ writel(0xff000000, &h32mx->sassr[3]);
+ writel(0xff000000, &h32mx->srtsr[3]);
+
+ /* NFC SRAM */
+ writel(0x00010101, &h32mx->ssr[4]);
+ writel(0x00000001, &h32mx->sassr[4]);
+ writel(0x00000001, &h32mx->srtsr[4]);
+
+ /* Enable the write protect */
+ writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr);
+ writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr);
+}
+
+void redirect_int_from_saic_to_aic(void)
+{
+ struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR;
+ u32 key32;
+
+ if (!(readl(&sfr->aicredir) & ATMEL_SFR_AICREDIR_NSAIC)) {
+ key32 = readl(&sfr->sn1) ^ ATMEL_SFR_AICREDIR_KEY;
+ writel((key32 | ATMEL_SFR_AICREDIR_NSAIC), &sfr->aicredir);
+ }
+}
+#endif
diff --git a/arch/arm/cpu/armv7/cpu.c b/arch/arm/cpu/armv7/cpu.c
index 01cdb7e..c56417d 100644
--- a/arch/arm/cpu/armv7/cpu.c
+++ b/arch/arm/cpu/armv7/cpu.c
@@ -53,7 +53,7 @@ int cleanup_before_linux(void)
* After D-cache is flushed and before it is disabled there may
* be some new valid entries brought into the cache. We are sure
* that these lines are not dirty and will not affect our execution.
- * (because unwinding the call-stack and setting a bit in CP15 SCTRL
+ * (because unwinding the call-stack and setting a bit in CP15 SCTLR
* is all we did during this. We have not pushed anything on to the
* stack. Neither have we affected any static data)
* So just invalidate the entire d-cache again to avoid coherency
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index 94d0297..be43e22 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -266,22 +266,33 @@ static void exynos5_sromc_config(int flags)
static void exynos5_i2c_config(int peripheral, int flags)
{
+ int func01, func23;
+
+ /* High-Speed I2C */
+ if (flags & PINMUX_FLAG_HS_MODE) {
+ func01 = 4;
+ func23 = 4;
+ } else {
+ func01 = 2;
+ func23 = 3;
+ }
+
switch (peripheral) {
case PERIPH_ID_I2C0:
- gpio_cfg_pin(EXYNOS5_GPIO_B30, S5P_GPIO_FUNC(0x2));
- gpio_cfg_pin(EXYNOS5_GPIO_B31, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5_GPIO_B30, S5P_GPIO_FUNC(func01));
+ gpio_cfg_pin(EXYNOS5_GPIO_B31, S5P_GPIO_FUNC(func01));
break;
case PERIPH_ID_I2C1:
- gpio_cfg_pin(EXYNOS5_GPIO_B32, S5P_GPIO_FUNC(0x2));
- gpio_cfg_pin(EXYNOS5_GPIO_B33, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5_GPIO_B32, S5P_GPIO_FUNC(func01));
+ gpio_cfg_pin(EXYNOS5_GPIO_B33, S5P_GPIO_FUNC(func01));
break;
case PERIPH_ID_I2C2:
- gpio_cfg_pin(EXYNOS5_GPIO_A06, S5P_GPIO_FUNC(0x3));
- gpio_cfg_pin(EXYNOS5_GPIO_A07, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_A06, S5P_GPIO_FUNC(func23));
+ gpio_cfg_pin(EXYNOS5_GPIO_A07, S5P_GPIO_FUNC(func23));
break;
case PERIPH_ID_I2C3:
- gpio_cfg_pin(EXYNOS5_GPIO_A12, S5P_GPIO_FUNC(0x3));
- gpio_cfg_pin(EXYNOS5_GPIO_A13, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_A12, S5P_GPIO_FUNC(func23));
+ gpio_cfg_pin(EXYNOS5_GPIO_A13, S5P_GPIO_FUNC(func23));
break;
case PERIPH_ID_I2C4:
gpio_cfg_pin(EXYNOS5_GPIO_A20, S5P_GPIO_FUNC(0x3));
diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c
index 989780d..71a1753 100644
--- a/arch/arm/cpu/armv7/ls102xa/fdt.c
+++ b/arch/arm/cpu/armv7/ls102xa/fdt.c
@@ -15,6 +15,8 @@
#include <fsl_esdhc.h>
#endif
#include <tsec.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <fsl_sec.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -77,9 +79,24 @@ void ft_cpu_setup(void *blob, bd_t *bd)
int off;
int val;
const char *sysclk_path;
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ unsigned int svr;
+ svr = in_be32(&gur->svr);
unsigned long busclk = get_bus_freq(0);
+ /* delete crypto node if not on an E-processor */
+ if (!IS_E_PROCESSOR(svr))
+ fdt_fixup_crypto_node(blob, 0);
+#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
+ else {
+ ccsr_sec_t __iomem *sec;
+
+ sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+ fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
+ }
+#endif
+
fdt_fixup_ethernet(blob);
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
@@ -107,6 +124,25 @@ void ft_cpu_setup(void *blob, bd_t *bd)
do_fixup_by_compat_u32(blob, "fsl,qoriq-sysclk-2.0",
"clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
+#if defined(CONFIG_DEEP_SLEEP) && defined(CONFIG_SD_BOOT)
+#define UBOOT_HEAD_LEN 0x1000
+ /*
+ * Reserved memory in SD boot deep sleep case.
+ * Second stage uboot binary and malloc space should be reserved.
+ * If the memory they occupied has not been reserved, then this
+ * space would be used by kernel and overwritten in uboot when
+ * deep sleep resume, which cause deep sleep failed.
+ * Since second uboot binary has a head, that space need to be
+ * reserved either(assuming its size is less than 0x1000).
+ */
+ off = fdt_add_mem_rsv(blob, CONFIG_SYS_TEXT_BASE - UBOOT_HEAD_LEN,
+ CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_SPL_MALLOC_SIZE +
+ UBOOT_HEAD_LEN);
+ if (off < 0)
+ printf("Failed to reserve memory for SD boot deep sleep: %s\n",
+ fdt_strerror(off));
+#endif
+
#if defined(CONFIG_FSL_ESDHC)
fdt_fixup_esdhc(blob, bd);
#endif
@@ -133,4 +169,17 @@ void ft_cpu_setup(void *blob, bd_t *bd)
do_fixup_by_compat_u32(blob, "fsl, ls1021a-flexcan",
"clock-frequency", busclk / 2, 1);
+
+#ifdef CONFIG_QSPI_BOOT
+ off = fdt_node_offset_by_compat_reg(blob, FSL_IFC_COMPAT,
+ CONFIG_SYS_IFC_ADDR);
+ fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+#else
+ off = fdt_node_offset_by_compat_reg(blob, FSL_QSPI_COMPAT,
+ QSPI0_BASE_ADDR);
+ fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+ off = fdt_node_offset_by_compat_reg(blob, FSL_DSPI_COMPAT,
+ DSPI1_BASE_ADDR);
+ fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+#endif
}
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 00a1082..17500f2 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -106,6 +106,16 @@ u32 spl_boot_mode(void)
void spl_board_init(void)
{
+ /*
+ * Save the boot parameters passed from romcode.
+ * We cannot delay the saving further than this,
+ * to prevent overwrites.
+ */
+ save_omap_boot_params();
+
+ /* Prepare console output */
+ preloader_console_init();
+
#ifdef CONFIG_SPL_NAND_SUPPORT
gpmc_init();
#endif
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index 8e7411d..03674e6 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -437,12 +437,15 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic)
{
u32 offset_code;
u32 offset = volt_mv;
+#ifndef CONFIG_DRA7XX
int ret = 0;
+#endif
if (!volt_mv)
return;
pmic->pmic_bus_init();
+#ifndef CONFIG_DRA7XX
/* See if we can first get the GPIO if needed */
if (pmic->gpio_en)
ret = gpio_request(pmic->gpio, "PMIC_GPIO");
@@ -456,7 +459,7 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic)
/* Pull the GPIO low to select SET0 register, while we program SET1 */
if (pmic->gpio_en)
gpio_direction_output(pmic->gpio, 0);
-
+#endif
/* convert to uV for better accuracy in the calculations */
offset *= 1000;
@@ -467,9 +470,10 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic)
if (pmic->pmic_write(pmic->i2c_slave_addr, vcore_reg, offset_code))
printf("Scaling voltage failed for 0x%x\n", vcore_reg);
-
+#ifndef CONFIG_DRA7XX
if (pmic->gpio_en)
gpio_direction_output(pmic->gpio, 1);
+#endif
}
static u32 optimize_vcore_voltage(struct volts const *v)
@@ -505,13 +509,79 @@ static u32 optimize_vcore_voltage(struct volts const *v)
}
/*
- * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
- * We set the maximum voltages allowed here because Smart-Reflex is not
- * enabled in bootloader. Voltage initialization in the kernel will set
- * these to the nominal values after enabling Smart-Reflex
+ * Setup the voltages for the main SoC core power domains.
+ * We start with the maximum voltages allowed here, as set in the corresponding
+ * vcores_data struct, and then scale (usually down) to the fused values that
+ * are retrieved from the SoC. The scaling happens only if the efuse.reg fields
+ * are initialised.
+ * Rail grouping is supported for the DRA7xx SoCs only, therefore the code is
+ * compiled conditionally. Note that the new code writes the scaled (or zeroed)
+ * values back to the vcores_data struct for eventual reuse. Zero values mean
+ * that the corresponding rails are not controlled separately, and are not sent
+ * to the PMIC.
*/
void scale_vcores(struct vcores_data const *vcores)
{
+#if defined(CONFIG_DRA7XX)
+ int i;
+ struct volts *pv = (struct volts *)vcores;
+ struct volts *px;
+
+ for (i=0; i<(sizeof(struct vcores_data)/sizeof(struct volts)); i++) {
+ debug("%d -> ", pv->value);
+ if (pv->value) {
+ /* Handle non-empty members only */
+ pv->value = optimize_vcore_voltage(pv);
+ px = (struct volts *)vcores;
+ while (px < pv) {
+ /*
+ * Scan already handled non-empty members to see
+ * if we have a group and find the max voltage,
+ * which is set to the first occurance of the
+ * particular SMPS; the other group voltages are
+ * zeroed.
+ */
+ if (px->value) {
+ if ((pv->pmic->i2c_slave_addr ==
+ px->pmic->i2c_slave_addr) &&
+ (pv->addr == px->addr)) {
+ /* Same PMIC, same SMPS */
+ if (pv->value > px->value)
+ px->value = pv->value;
+
+ pv->value = 0;
+ }
+ }
+ px++;
+ }
+ }
+ debug("%d\n", pv->value);
+ pv++;
+ }
+
+ debug("cor: %d\n", vcores->core.value);
+ do_scale_vcore(vcores->core.addr, vcores->core.value, vcores->core.pmic);
+ debug("mpu: %d\n", vcores->mpu.value);
+ do_scale_vcore(vcores->mpu.addr, vcores->mpu.value, vcores->mpu.pmic);
+ /* Configure MPU ABB LDO after scale */
+ abb_setup((*ctrl)->control_std_fuse_opp_vdd_mpu_2,
+ (*ctrl)->control_wkup_ldovbb_mpu_voltage_ctrl,
+ (*prcm)->prm_abbldo_mpu_setup,
+ (*prcm)->prm_abbldo_mpu_ctrl,
+ (*prcm)->prm_irqstatus_mpu_2,
+ OMAP_ABB_MPU_TXDONE_MASK,
+ OMAP_ABB_FAST_OPP);
+
+ /* The .mm member is not used for the DRA7xx */
+
+ debug("gpu: %d\n", vcores->gpu.value);
+ do_scale_vcore(vcores->gpu.addr, vcores->gpu.value, vcores->gpu.pmic);
+ debug("eve: %d\n", vcores->eve.value);
+ do_scale_vcore(vcores->eve.addr, vcores->eve.value, vcores->eve.pmic);
+ debug("iva: %d\n", vcores->iva.value);
+ do_scale_vcore(vcores->iva.addr, vcores->iva.value, vcores->iva.pmic);
+ /* Might need udelay(1000) here if debug is enabled to see all prints */
+#else
u32 val;
val = optimize_vcore_voltage(&vcores->core);
@@ -540,6 +610,7 @@ void scale_vcores(struct vcores_data const *vcores)
val = optimize_vcore_voltage(&vcores->iva);
do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic);
+#endif
}
static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode)
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index dd52e93..cb35c19 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -111,14 +111,6 @@ int arch_cpu_init(void)
*/
void s_init(void)
{
- /*
- * Save the boot parameters passed from romcode.
- * We cannot delay the saving further than this,
- * to prevent overwrites.
- */
-#ifdef CONFIG_SPL_BUILD
- save_omap_boot_params();
-#endif
init_omap_revision();
hw_data_init();
@@ -133,9 +125,6 @@ void s_init(void)
srcomp_enable();
setup_clocks_for_console();
- gd = &gdata;
-
- preloader_console_init();
do_io_settings();
#endif
prcm_init();
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 53a9e5d..90d6ae7 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -119,6 +119,7 @@ int board_mmc_init(bd_t *bis)
void spl_board_init(void)
{
+ preloader_console_init();
#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
gpmc_init();
#endif
@@ -264,14 +265,6 @@ void s_init(void)
ehci_clocks_enable();
#endif
-#ifdef CONFIG_SPL_BUILD
- gd = &gdata;
-
- preloader_console_init();
-
- timer_init();
-#endif
-
if (!in_sdram)
mem_init();
}
diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
index 529ad9a..006969e 100644
--- a/arch/arm/cpu/armv7/omap3/clock.c
+++ b/arch/arm/cpu/armv7/omap3/clock.c
@@ -732,11 +732,20 @@ void per_clocks_enable(void)
setbits_le32(&prcm_base->iclken_per, 0x08); /* ICKen GPT2 */
setbits_le32(&prcm_base->fclken_per, 0x08); /* FCKen GPT2 */
+ /* Enable GP9 timer. */
+ setbits_le32(&prcm_base->clksel_per, 0x80); /* GPT9 = 32kHz clk */
+ setbits_le32(&prcm_base->iclken_per, 0x400); /* ICKen GPT9 */
+ setbits_le32(&prcm_base->fclken_per, 0x400); /* FCKen GPT9 */
+
#ifdef CONFIG_SYS_NS16550
/* Enable UART1 clocks */
setbits_le32(&prcm_base->fclken1_core, 0x00002000);
setbits_le32(&prcm_base->iclken1_core, 0x00002000);
+ /* Enable UART2 clocks */
+ setbits_le32(&prcm_base->fclken1_core, 0x00004000);
+ setbits_le32(&prcm_base->iclken1_core, 0x00004000);
+
/* UART 3 Clocks */
setbits_le32(&prcm_base->fclken_per, 0x00000800);
setbits_le32(&prcm_base->iclken_per, 0x00000800);
diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c
index 7a29131..4f15ac9 100644
--- a/arch/arm/cpu/armv7/omap3/sdrc.c
+++ b/arch/arm/cpu/armv7/omap3/sdrc.c
@@ -135,6 +135,9 @@ void do_sdrc_init(u32 cs, u32 early)
sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE;
+ /* set some default timings */
+ timings.sharing = SDRC_SHARING;
+
/*
* When called in the early context this may be SPL and we will
* need to set all of the timings. This ends up being board
@@ -145,6 +148,7 @@ void do_sdrc_init(u32 cs, u32 early)
* setup CS1.
*/
#ifdef CONFIG_SPL_BUILD
+ /* set/modify board-specific timings */
get_board_mem_timings(&timings);
#endif
if (early) {
@@ -155,7 +159,7 @@ void do_sdrc_init(u32 cs, u32 early)
writel(0, &sdrc_base->sysconfig);
/* setup sdrc to ball mux */
- writel(SDRC_SHARING, &sdrc_base->sharing);
+ writel(timings.sharing, &sdrc_base->sharing);
/* Disable Power Down of CKE because of 1 CKE on combo part */
writel(WAKEUPPROC | SRFRONRESET | PAGEPOLICY_HIGH,
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 95f1686..b9734fe 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -320,6 +320,7 @@ struct pmic_data palmas = {
.pmic_write = omap_vc_bypass_send_value,
};
+/* The TPS659038 and TPS65917 are software-compatible, use common struct */
struct pmic_data tps659038 = {
.base_offset = PALMAS_SMPS_BASE_VOLT_UV,
.step = 10000, /* 10 mV represented in uV */
@@ -394,34 +395,38 @@ struct vcores_data dra752_volts = {
};
struct vcores_data dra722_volts = {
- .mpu.value = 1000,
+ .mpu.value = VDD_MPU_DRA72x,
.mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU_NOM,
- .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
- .mpu.addr = 0x23,
+ .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .mpu.addr = TPS65917_REG_ADDR_SMPS1,
.mpu.pmic = &tps659038,
- .eve.value = 1000,
- .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
- .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
- .eve.addr = 0x2f,
- .eve.pmic = &tps659038,
+ .core.value = VDD_CORE_DRA72x,
+ .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM,
+ .core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .core.addr = TPS65917_REG_ADDR_SMPS2,
+ .core.pmic = &tps659038,
- .gpu.value = 1000,
+ /*
+ * The DSPEVE, GPU and IVA rails are usually grouped on DRA72x
+ * designs and powered by TPS65917 SMPS3, as on the J6Eco EVM.
+ */
+ .gpu.value = VDD_GPU_DRA72x,
.gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM,
- .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
- .gpu.addr = 0x2f,
+ .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .gpu.addr = TPS65917_REG_ADDR_SMPS3,
.gpu.pmic = &tps659038,
- .core.value = 1000,
- .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM,
- .core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
- .core.addr = 0x27,
- .core.pmic = &tps659038,
+ .eve.value = VDD_EVE_DRA72x,
+ .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
+ .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .eve.addr = TPS65917_REG_ADDR_SMPS3,
+ .eve.pmic = &tps659038,
- .iva.value = 1000,
+ .iva.value = VDD_IVA_DRA72x,
.iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA_NOM,
- .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
- .iva.addr = 0x2f,
+ .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .iva.addr = TPS65917_REG_ADDR_SMPS3,
.iva.pmic = &tps659038,
};
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index fdc05b9..70048c1 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -52,10 +52,10 @@ reset:
* Continue to use ROM code vector only in OMAP4 spl)
*/
#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD))
- /* Set V=0 in CP15 SCTRL register - for VBAR to point to vector */
- mrc p15, 0, r0, c1, c0, 0 @ Read CP15 SCTRL Register
+ /* Set V=0 in CP15 SCTLR register - for VBAR to point to vector */
+ mrc p15, 0, r0, c1, c0, 0 @ Read CP15 SCTLR Register
bic r0, #CR_V @ V = 0
- mcr p15, 0, r0, c1, c0, 0 @ Write CP15 SCTRL Register
+ mcr p15, 0, r0, c1, c0, 0 @ Write CP15 SCTLR Register
/* Set vector address in CP15 VBAR register */
ldr r0, =_start
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
index 1720f7d..48db744 100644
--- a/arch/arm/cpu/armv7/sunxi/Makefile
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -15,13 +15,16 @@ obj-y += pinmux.o
obj-y += usbc.o
obj-$(CONFIG_MACH_SUN6I) += prcm.o
obj-$(CONFIG_MACH_SUN8I) += prcm.o
+obj-$(CONFIG_MACH_SUN9I) += prcm.o
obj-$(CONFIG_MACH_SUN6I) += p2wi.o
obj-$(CONFIG_MACH_SUN8I) += rsb.o
+obj-$(CONFIG_MACH_SUN9I) += rsb.o
obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o
obj-$(CONFIG_MACH_SUN7I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o
+obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o
ifndef CONFIG_SPL_BUILD
ifdef CONFIG_ARMV7_PSCI
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index bc98c56..6e28bcd 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -27,28 +27,7 @@
#include <linux/compiler.h>
-#ifdef CONFIG_SPL_BUILD
-/* Pointer to the global data structure for SPL */
-DECLARE_GLOBAL_DATA_PTR;
-
-/* The sunxi internal brom will try to loader external bootloader
- * from mmc0, nand flash, mmc2.
- * Unfortunately we can't check how SPL was loaded so assume
- * it's always the first SD/MMC controller
- */
-u32 spl_boot_device(void)
-{
- return BOOT_DEVICE_MMC1;
-}
-
-/* No confirmation data available in SPL yet. Hardcode bootmode */
-u32 spl_boot_mode(void)
-{
- return MMCSD_MODE_RAW;
-}
-#endif
-
-int gpio_init(void)
+static int gpio_init(void)
{
#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
@@ -86,36 +65,9 @@ int gpio_init(void)
return 0;
}
-void reset_cpu(ulong addr)
-{
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
- static const struct sunxi_wdog *wdog =
- &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
-
- /* Set the watchdog for its shortest interval (.5s) and wait */
- writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
- writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
-
- while (1) {
- /* sun5i sometimes gets stuck without this */
- writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
- }
-#else /* CONFIG_MACH_SUN6I || CONFIG_MACH_SUN8I || .. */
- static const struct sunxi_wdog *wdog =
- ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
-
- /* Set the watchdog for its shortest interval (.5s) and wait */
- writel(WDT_CFG_RESET, &wdog->cfg);
- writel(WDT_MODE_EN, &wdog->mode);
- writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
-#endif
-}
-
-/* do some early init */
void s_init(void)
{
-#if defined CONFIG_SPL_BUILD && \
- (defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I)
+#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I
/* Magic (undocmented) value taken from boot0, without this DRAM
* access gets messed up (seems cache related) */
setbits_le32(SUNXI_SRAMC_BASE + 0x44, 0x1800);
@@ -133,9 +85,27 @@ void s_init(void)
timer_init();
gpio_init();
i2c_init_board();
+}
#ifdef CONFIG_SPL_BUILD
- gd = &gdata;
+/* The sunxi internal brom will try to loader external bootloader
+ * from mmc0, nand flash, mmc2.
+ * Unfortunately we can't check how SPL was loaded so assume
+ * it's always the first SD/MMC controller
+ */
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_MMC1;
+}
+
+/* No confirmation data available in SPL yet. Hardcode bootmode */
+u32 spl_boot_mode(void)
+{
+ return MMCSD_MODE_RAW;
+}
+
+void board_init_f(ulong dummy)
+{
preloader_console_init();
#ifdef CONFIG_SPL_I2C_SUPPORT
@@ -143,6 +113,36 @@ void s_init(void)
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
#endif
sunxi_board_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ board_init_r(NULL, 0);
+}
+#endif
+
+void reset_cpu(ulong addr)
+{
+#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+ static const struct sunxi_wdog *wdog =
+ &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
+
+ /* Set the watchdog for its shortest interval (.5s) and wait */
+ writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
+ writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
+
+ while (1) {
+ /* sun5i sometimes gets stuck without this */
+ writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
+ }
+#else /* CONFIG_MACH_SUN6I || CONFIG_MACH_SUN8I || .. */
+ static const struct sunxi_wdog *wdog =
+ ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
+
+ /* Set the watchdog for its shortest interval (.5s) and wait */
+ writel(WDT_CFG_RESET, &wdog->cfg);
+ writel(WDT_MODE_EN, &wdog->mode);
+ writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
#endif
}
diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
index d7a7040..e2a7867 100644
--- a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
@@ -45,10 +45,10 @@ void clock_init_safe(void)
void clock_init_uart(void)
{
+#if CONFIG_CONS_INDEX < 5
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-#if CONFIG_CONS_INDEX < 5
/* uart clock source is apb2 */
writel(APB2_CLK_SRC_OSC24M|
APB2_CLK_RATE_N_1|
@@ -68,9 +68,6 @@ void clock_init_uart(void)
/* enable R_PIO and R_UART clocks, and de-assert resets */
prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART);
#endif
-
- /* Dup with clock_init_safe(), drop once sun6i SPL support lands */
- writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
}
int clock_twi_onoff(int port, int state)
diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun9i.c b/arch/arm/cpu/armv7/sunxi/clock_sun9i.c
new file mode 100644
index 0000000..27179ba
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun9i.c
@@ -0,0 +1,68 @@
+/*
+ * sun9i specific clock code
+ *
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/sys_proto.h>
+
+void clock_init_uart(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* open the clock for uart */
+ setbits_le32(&ccm->apb1_gate,
+ CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT +
+ CONFIG_CONS_INDEX - 1));
+ /* deassert uart reset */
+ setbits_le32(&ccm->apb1_reset_cfg,
+ 1 << (APB1_RESET_UART_SHIFT +
+ CONFIG_CONS_INDEX - 1));
+
+ /* Dup with clock_init_safe(), drop once sun9i SPL support lands */
+ writel(PLL4_CFG_DEFAULT, &ccm->pll4_periph0_cfg);
+}
+
+int clock_twi_onoff(int port, int state)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ if (port > 4)
+ return -1;
+
+ /* set the apb reset and clock gate for twi */
+ if (state) {
+ setbits_le32(&ccm->apb1_gate,
+ CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
+ setbits_le32(&ccm->apb1_reset_cfg,
+ 1 << (APB1_RESET_UART_SHIFT + port));
+ } else {
+ clrbits_le32(&ccm->apb1_reset_cfg,
+ 1 << (APB1_RESET_UART_SHIFT + port));
+ clrbits_le32(&ccm->apb1_gate,
+ CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
+ }
+
+ return 0;
+}
+
+unsigned int clock_get_pll4_periph0(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ uint32_t rval = readl(&ccm->pll4_periph0_cfg);
+ int n = ((rval & CCM_PLL4_CTRL_N_MASK) >> CCM_PLL4_CTRL_N_SHIFT);
+ int p = ((rval & CCM_PLL4_CTRL_P_MASK) >> CCM_PLL4_CTRL_P_SHIFT);
+ int m = ((rval & CCM_PLL4_CTRL_M_MASK) >> CCM_PLL4_CTRL_M_SHIFT) + 1;
+ const int k = 1;
+
+ return ((24000000 * n * k) >> p) / m;
+}
diff --git a/arch/arm/cpu/armv7/sunxi/rsb.c b/arch/arm/cpu/armv7/sunxi/rsb.c
index b72bb9d..b00befb 100644
--- a/arch/arm/cpu/armv7/sunxi/rsb.c
+++ b/arch/arm/cpu/armv7/sunxi/rsb.c
@@ -16,14 +16,27 @@
#include <asm/arch/prcm.h>
#include <asm/arch/rsb.h>
+static int rsb_set_device_mode(void);
+
static void rsb_cfg_io(void)
{
+#ifdef CONFIG_MACH_SUN8I
sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_GPL0_R_RSB_SCK);
sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_GPL1_R_RSB_SDA);
sunxi_gpio_set_pull(SUNXI_GPL(0), 1);
sunxi_gpio_set_pull(SUNXI_GPL(1), 1);
sunxi_gpio_set_drv(SUNXI_GPL(0), 2);
sunxi_gpio_set_drv(SUNXI_GPL(1), 2);
+#elif defined CONFIG_MACH_SUN9I
+ sunxi_gpio_set_cfgpin(SUNXI_GPN(0), SUN9I_GPN0_R_RSB_SCK);
+ sunxi_gpio_set_cfgpin(SUNXI_GPN(1), SUN9I_GPN1_R_RSB_SDA);
+ sunxi_gpio_set_pull(SUNXI_GPN(0), 1);
+ sunxi_gpio_set_pull(SUNXI_GPN(1), 1);
+ sunxi_gpio_set_drv(SUNXI_GPN(0), 2);
+ sunxi_gpio_set_drv(SUNXI_GPN(1), 2);
+#else
+#error unsupported MACH_SUNXI
+#endif
}
static void rsb_set_clk(void)
@@ -42,7 +55,7 @@ static void rsb_set_clk(void)
writel((cd_odly << 8) | div, &rsb->ccr);
}
-void rsb_init(void)
+int rsb_init(void)
{
struct sunxi_rsb_reg * const rsb =
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
@@ -54,6 +67,8 @@ void rsb_init(void)
writel(RSB_CTRL_SOFT_RST, &rsb->ctrl);
rsb_set_clk();
+
+ return rsb_set_device_mode();
}
static int rsb_await_trans(void)
@@ -88,13 +103,14 @@ static int rsb_await_trans(void)
return ret;
}
-int rsb_set_device_mode(u32 device_mode_data)
+static int rsb_set_device_mode(void)
{
struct sunxi_rsb_reg * const rsb =
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
unsigned long tmo = timer_get_us() + 1000000;
- writel(RSB_DMCR_DEVICE_MODE_START | device_mode_data, &rsb->dmcr);
+ writel(RSB_DMCR_DEVICE_MODE_START | RSB_DMCR_DEVICE_MODE_DATA,
+ &rsb->dmcr);
while (readl(&rsb->dmcr) & RSB_DMCR_DEVICE_MODE_START) {
if (timer_get_us() > tmo)
diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig
index 0556e4b..5c5a84f 100644
--- a/arch/arm/cpu/armv7/uniphier/Kconfig
+++ b/arch/arm/cpu/armv7/uniphier/Kconfig
@@ -50,21 +50,12 @@ endchoice
config CMD_PINMON
bool "Enable boot mode pins monitor command"
- depends on !SPL_BUILD
default y
help
The command "pinmon" shows the state of the boot mode pins.
The boot mode pins are latched when the system reset is deasserted
and determine which device the system should load a boot image from.
-config SOC_INIT
- bool
- default SPL_BUILD
-
-config DRAM_INIT
- bool
- default SPL_BUILD
-
config CMD_DDRPHY_DUMP
bool "Enable dump command of DDR PHY parameters"
depends on !SPL_BUILD
@@ -74,7 +65,7 @@ config CMD_DDRPHY_DUMP
choice
prompt "DDR3 Frequency select"
- depends on DRAM_INIT
+ depends on SPL_BUILD
config DDR_FREQ_1600
bool "DDR3 1600"
diff --git a/arch/arm/cpu/armv7/uniphier/Makefile b/arch/arm/cpu/armv7/uniphier/Makefile
index 0546232..df418dd 100644
--- a/arch/arm/cpu/armv7/uniphier/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/Makefile
@@ -2,23 +2,32 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_SPL_BUILD) += lowlevel_init.o init_page_table.o
-obj-$(CONFIG_SPL_BUILD) += spl.o
+ifdef CONFIG_SPL_BUILD
-obj-y += timer.o
-obj-y += reset.o
-obj-y += cache_uniphier.o
-obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o
-obj-y += dram_init.o
-obj-$(CONFIG_DRAM_INIT) += ddrphy_training.o
+obj-y += lowlevel_init.o
+obj-y += init_page_table.o
+obj-y += spl.o
+obj-y += ddrphy_training.o
+
+else
+
+obj-$(CONFIG_BOARD_EARLY_INIT_F) += board_early_init_f.o
obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o
+obj-$(CONFIG_MISC_INIT_F) += print_misc_info.o
+obj-y += dram_init.o
+obj-y += board_common.o
obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o
obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
+obj-y += reset.o
+obj-y += cache_uniphier.o
obj-$(CONFIG_UNIPHIER_SMP) += smp.o
obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o
obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o
-obj-y += board_common.o
+endif
+
+obj-y += timer.o
+
obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o
obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o
diff --git a/arch/arm/cpu/armv7/uniphier/board_early_init_f.c b/arch/arm/cpu/armv7/uniphier/board_early_init_f.c
new file mode 100644
index 0000000..d25bbae
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/board_early_init_f.c
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012-2015 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/led.h>
+#include <asm/arch/board.h>
+
+void pin_init(void);
+
+int board_early_init_f(void)
+{
+ led_write(U, 0, , );
+
+ pin_init();
+
+ led_write(U, 1, , );
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/uniphier/board_postclk_init.c b/arch/arm/cpu/armv7/uniphier/board_postclk_init.c
deleted file mode 100644
index 89e44bb..0000000
--- a/arch/arm/cpu/armv7/uniphier/board_postclk_init.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/compiler.h>
-#include <asm/arch/led.h>
-#include <asm/arch/board.h>
-
-void __weak bcu_init(void)
-{
-};
-void sbc_init(void);
-void sg_init(void);
-void pll_init(void);
-void pin_init(void);
-void clkrst_init(void);
-
-int board_postclk_init(void)
-{
-#ifdef CONFIG_SOC_INIT
- bcu_init();
-
- sbc_init();
-
- sg_init();
-
- uniphier_board_reset();
-
- pll_init();
-
- uniphier_board_init();
-
- led_write(B, 1, , );
-
- clkrst_init();
-
- led_write(B, 2, , );
-#endif
- pin_init();
-
- led_write(B, 3, , );
-
- return 0;
-}
diff --git a/arch/arm/cpu/armv7/uniphier/cmd_pinmon.c b/arch/arm/cpu/armv7/uniphier/cmd_pinmon.c
index 3561b40..3c1b325 100644
--- a/arch/arm/cpu/armv7/uniphier/cmd_pinmon.c
+++ b/arch/arm/cpu/armv7/uniphier/cmd_pinmon.c
@@ -11,20 +11,17 @@
static int do_pinmon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- struct boot_device_info *table;
- u32 mode_sel, n = 0;
-
- mode_sel = get_boot_mode_sel();
+ int mode_sel, i;
printf("Boot Swap: %s\n\n", boot_is_swapped() ? "ON" : "OFF");
+ mode_sel = get_boot_mode_sel();
+
puts("Boot Mode Pin:\n");
- for (table = boot_device_table; strlen(table->info); table++) {
- printf(" %c %02x %s\n", n == mode_sel ? '*' : ' ', n,
- table->info);
- n++;
- }
+ for (i = 0; boot_device_table[i].info; i++)
+ printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i,
+ boot_device_table[i].info);
return 0;
}
diff --git a/arch/arm/cpu/armv7/uniphier/dram_init.c b/arch/arm/cpu/armv7/uniphier/dram_init.c
index 7de657b..4b8c938 100644
--- a/arch/arm/cpu/armv7/uniphier/dram_init.c
+++ b/arch/arm/cpu/armv7/uniphier/dram_init.c
@@ -1,37 +1,16 @@
/*
- * Copyright (C) 2012-2014 Panasonic Corporation
+ * Copyright (C) 2012-2015 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
-#include <asm/arch/led.h>
-
-int umc_init(void);
-void enable_dpll_ssc(void);
int dram_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
-#ifdef CONFIG_DRAM_INIT
- led_write(B, 4, , );
-
- {
- int res;
-
- res = umc_init();
- if (res < 0)
- return res;
- }
- led_write(B, 5, , );
-
- enable_dpll_ssc();
-#endif
-
- led_write(B, 6, , );
-
return 0;
}
diff --git a/arch/arm/cpu/armv7/uniphier/init_page_table.S b/arch/arm/cpu/armv7/uniphier/init_page_table.S
new file mode 100644
index 0000000..2638bcd
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/init_page_table.S
@@ -0,0 +1,26 @@
+#include <config.h>
+#include <linux/linkage.h>
+
+/* page table */
+#define NR_SECTIONS 4096
+#define SECTION_SHIFT 20
+#define DEVICE 0x00002002 /* Non-shareable Device */
+#define NORMAL 0x0000000e /* Normal Memory Write-Back, No Write-Allocate */
+
+#define TEXT_SECTION ((CONFIG_SPL_TEXT_BASE) >> (SECTION_SHIFT))
+#define STACK_SECTION ((CONFIG_SYS_INIT_SP_ADDR) >> (SECTION_SHIFT))
+
+ .section ".rodata"
+ .align 14
+ENTRY(init_page_table)
+ section = 0
+ .rept NR_SECTIONS
+ .if section == TEXT_SECTION || section == STACK_SECTION
+ attr = NORMAL
+ .else
+ attr = DEVICE
+ .endif
+ .word (section << SECTION_SHIFT) | attr
+ section = section + 1
+ .endr
+END(init_page_table)
diff --git a/arch/arm/cpu/armv7/uniphier/init_page_table.c b/arch/arm/cpu/armv7/uniphier/init_page_table.c
deleted file mode 100644
index febb3c8..0000000
--- a/arch/arm/cpu/armv7/uniphier/init_page_table.c
+++ /dev/null
@@ -1,1069 +0,0 @@
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-/* encoding without TEX remap */
-#define NO_MAP 0x00000000 /* No Map */
-#define DEVICE 0x00002002 /* Non-shareable Device */
-#define NORMAL 0x0000000e /* Normal Memory Write-Back, No Write-Allocate */
-
-#define SSC NORMAL /* System Cache: Normal */
-#define EXT DEVICE /* External Bus: Device */
-#define REG DEVICE /* IO Register: Device */
-#define DDR DEVICE /* DDR SDRAM: Device */
-
-#define IS_SPL_TEXT_AREA(x) ((x) == ((CONFIG_SPL_TEXT_BASE) >> 20))
-
-#define IS_INIT_STACK_AREA(x) ((x) == ((CONFIG_SYS_INIT_SP_ADDR) >> 20))
-
-#define IS_SSC(x) ((IS_SPL_TEXT_AREA(x)) || \
- (IS_INIT_STACK_AREA(x)))
-#define IS_EXT(x) ((x) < 0x100)
-
-/* 0x20000000-0x2fffffff, 0xf0000000-0xffffffff are only used by PH1-sLD3 */
-#define IS_REG(x) (0x200 <= (x) && (x) < 0x300) || \
- (0x500 <= (x) && (x) < 0x700) || \
- (0xf00 <= (x))
-
-#define IS_DDR(x) (0x800 <= (x) && (x) < 0xf00)
-
-#define MMU_FLAGS(x) (IS_SSC(x)) ? SSC : \
- (IS_EXT(x)) ? EXT : \
- (IS_REG(x)) ? REG : \
- (IS_DDR(x)) ? DDR : \
- NO_MAP
-
-#define TBL_ENTRY(x) (((x) << 20) | (MMU_FLAGS(x)))
-
-const u32 __aligned(PGTABLE_SIZE) init_page_table[PGTABLE_SIZE / sizeof(u32)]
- = {
- TBL_ENTRY(0x000), TBL_ENTRY(0x001), TBL_ENTRY(0x002), TBL_ENTRY(0x003),
- TBL_ENTRY(0x004), TBL_ENTRY(0x005), TBL_ENTRY(0x006), TBL_ENTRY(0x007),
- TBL_ENTRY(0x008), TBL_ENTRY(0x009), TBL_ENTRY(0x00a), TBL_ENTRY(0x00b),
- TBL_ENTRY(0x00c), TBL_ENTRY(0x00d), TBL_ENTRY(0x00e), TBL_ENTRY(0x00f),
- TBL_ENTRY(0x010), TBL_ENTRY(0x011), TBL_ENTRY(0x012), TBL_ENTRY(0x013),
- TBL_ENTRY(0x014), TBL_ENTRY(0x015), TBL_ENTRY(0x016), TBL_ENTRY(0x017),
- TBL_ENTRY(0x018), TBL_ENTRY(0x019), TBL_ENTRY(0x01a), TBL_ENTRY(0x01b),
- TBL_ENTRY(0x01c), TBL_ENTRY(0x01d), TBL_ENTRY(0x01e), TBL_ENTRY(0x01f),
- TBL_ENTRY(0x020), TBL_ENTRY(0x021), TBL_ENTRY(0x022), TBL_ENTRY(0x023),
- TBL_ENTRY(0x024), TBL_ENTRY(0x025), TBL_ENTRY(0x026), TBL_ENTRY(0x027),
- TBL_ENTRY(0x028), TBL_ENTRY(0x029), TBL_ENTRY(0x02a), TBL_ENTRY(0x02b),
- TBL_ENTRY(0x02c), TBL_ENTRY(0x02d), TBL_ENTRY(0x02e), TBL_ENTRY(0x02f),
- TBL_ENTRY(0x030), TBL_ENTRY(0x031), TBL_ENTRY(0x032), TBL_ENTRY(0x033),
- TBL_ENTRY(0x034), TBL_ENTRY(0x035), TBL_ENTRY(0x036), TBL_ENTRY(0x037),
- TBL_ENTRY(0x038), TBL_ENTRY(0x039), TBL_ENTRY(0x03a), TBL_ENTRY(0x03b),
- TBL_ENTRY(0x03c), TBL_ENTRY(0x03d), TBL_ENTRY(0x03e), TBL_ENTRY(0x03f),
- TBL_ENTRY(0x040), TBL_ENTRY(0x041), TBL_ENTRY(0x042), TBL_ENTRY(0x043),
- TBL_ENTRY(0x044), TBL_ENTRY(0x045), TBL_ENTRY(0x046), TBL_ENTRY(0x047),
- TBL_ENTRY(0x048), TBL_ENTRY(0x049), TBL_ENTRY(0x04a), TBL_ENTRY(0x04b),
- TBL_ENTRY(0x04c), TBL_ENTRY(0x04d), TBL_ENTRY(0x04e), TBL_ENTRY(0x04f),
- TBL_ENTRY(0x050), TBL_ENTRY(0x051), TBL_ENTRY(0x052), TBL_ENTRY(0x053),
- TBL_ENTRY(0x054), TBL_ENTRY(0x055), TBL_ENTRY(0x056), TBL_ENTRY(0x057),
- TBL_ENTRY(0x058), TBL_ENTRY(0x059), TBL_ENTRY(0x05a), TBL_ENTRY(0x05b),
- TBL_ENTRY(0x05c), TBL_ENTRY(0x05d), TBL_ENTRY(0x05e), TBL_ENTRY(0x05f),
- TBL_ENTRY(0x060), TBL_ENTRY(0x061), TBL_ENTRY(0x062), TBL_ENTRY(0x063),
- TBL_ENTRY(0x064), TBL_ENTRY(0x065), TBL_ENTRY(0x066), TBL_ENTRY(0x067),
- TBL_ENTRY(0x068), TBL_ENTRY(0x069), TBL_ENTRY(0x06a), TBL_ENTRY(0x06b),
- TBL_ENTRY(0x06c), TBL_ENTRY(0x06d), TBL_ENTRY(0x06e), TBL_ENTRY(0x06f),
- TBL_ENTRY(0x070), TBL_ENTRY(0x071), TBL_ENTRY(0x072), TBL_ENTRY(0x073),
- TBL_ENTRY(0x074), TBL_ENTRY(0x075), TBL_ENTRY(0x076), TBL_ENTRY(0x077),
- TBL_ENTRY(0x078), TBL_ENTRY(0x079), TBL_ENTRY(0x07a), TBL_ENTRY(0x07b),
- TBL_ENTRY(0x07c), TBL_ENTRY(0x07d), TBL_ENTRY(0x07e), TBL_ENTRY(0x07f),
- TBL_ENTRY(0x080), TBL_ENTRY(0x081), TBL_ENTRY(0x082), TBL_ENTRY(0x083),
- TBL_ENTRY(0x084), TBL_ENTRY(0x085), TBL_ENTRY(0x086), TBL_ENTRY(0x087),
- TBL_ENTRY(0x088), TBL_ENTRY(0x089), TBL_ENTRY(0x08a), TBL_ENTRY(0x08b),
- TBL_ENTRY(0x08c), TBL_ENTRY(0x08d), TBL_ENTRY(0x08e), TBL_ENTRY(0x08f),
- TBL_ENTRY(0x090), TBL_ENTRY(0x091), TBL_ENTRY(0x092), TBL_ENTRY(0x093),
- TBL_ENTRY(0x094), TBL_ENTRY(0x095), TBL_ENTRY(0x096), TBL_ENTRY(0x097),
- TBL_ENTRY(0x098), TBL_ENTRY(0x099), TBL_ENTRY(0x09a), TBL_ENTRY(0x09b),
- TBL_ENTRY(0x09c), TBL_ENTRY(0x09d), TBL_ENTRY(0x09e), TBL_ENTRY(0x09f),
- TBL_ENTRY(0x0a0), TBL_ENTRY(0x0a1), TBL_ENTRY(0x0a2), TBL_ENTRY(0x0a3),
- TBL_ENTRY(0x0a4), TBL_ENTRY(0x0a5), TBL_ENTRY(0x0a6), TBL_ENTRY(0x0a7),
- TBL_ENTRY(0x0a8), TBL_ENTRY(0x0a9), TBL_ENTRY(0x0aa), TBL_ENTRY(0x0ab),
- TBL_ENTRY(0x0ac), TBL_ENTRY(0x0ad), TBL_ENTRY(0x0ae), TBL_ENTRY(0x0af),
- TBL_ENTRY(0x0b0), TBL_ENTRY(0x0b1), TBL_ENTRY(0x0b2), TBL_ENTRY(0x0b3),
- TBL_ENTRY(0x0b4), TBL_ENTRY(0x0b5), TBL_ENTRY(0x0b6), TBL_ENTRY(0x0b7),
- TBL_ENTRY(0x0b8), TBL_ENTRY(0x0b9), TBL_ENTRY(0x0ba), TBL_ENTRY(0x0bb),
- TBL_ENTRY(0x0bc), TBL_ENTRY(0x0bd), TBL_ENTRY(0x0be), TBL_ENTRY(0x0bf),
- TBL_ENTRY(0x0c0), TBL_ENTRY(0x0c1), TBL_ENTRY(0x0c2), TBL_ENTRY(0x0c3),
- TBL_ENTRY(0x0c4), TBL_ENTRY(0x0c5), TBL_ENTRY(0x0c6), TBL_ENTRY(0x0c7),
- TBL_ENTRY(0x0c8), TBL_ENTRY(0x0c9), TBL_ENTRY(0x0ca), TBL_ENTRY(0x0cb),
- TBL_ENTRY(0x0cc), TBL_ENTRY(0x0cd), TBL_ENTRY(0x0ce), TBL_ENTRY(0x0cf),
- TBL_ENTRY(0x0d0), TBL_ENTRY(0x0d1), TBL_ENTRY(0x0d2), TBL_ENTRY(0x0d3),
- TBL_ENTRY(0x0d4), TBL_ENTRY(0x0d5), TBL_ENTRY(0x0d6), TBL_ENTRY(0x0d7),
- TBL_ENTRY(0x0d8), TBL_ENTRY(0x0d9), TBL_ENTRY(0x0da), TBL_ENTRY(0x0db),
- TBL_ENTRY(0x0dc), TBL_ENTRY(0x0dd), TBL_ENTRY(0x0de), TBL_ENTRY(0x0df),
- TBL_ENTRY(0x0e0), TBL_ENTRY(0x0e1), TBL_ENTRY(0x0e2), TBL_ENTRY(0x0e3),
- TBL_ENTRY(0x0e4), TBL_ENTRY(0x0e5), TBL_ENTRY(0x0e6), TBL_ENTRY(0x0e7),
- TBL_ENTRY(0x0e8), TBL_ENTRY(0x0e9), TBL_ENTRY(0x0ea), TBL_ENTRY(0x0eb),
- TBL_ENTRY(0x0ec), TBL_ENTRY(0x0ed), TBL_ENTRY(0x0ee), TBL_ENTRY(0x0ef),
- TBL_ENTRY(0x0f0), TBL_ENTRY(0x0f1), TBL_ENTRY(0x0f2), TBL_ENTRY(0x0f3),
- TBL_ENTRY(0x0f4), TBL_ENTRY(0x0f5), TBL_ENTRY(0x0f6), TBL_ENTRY(0x0f7),
- TBL_ENTRY(0x0f8), TBL_ENTRY(0x0f9), TBL_ENTRY(0x0fa), TBL_ENTRY(0x0fb),
- TBL_ENTRY(0x0fc), TBL_ENTRY(0x0fd), TBL_ENTRY(0x0fe), TBL_ENTRY(0x0ff),
- TBL_ENTRY(0x100), TBL_ENTRY(0x101), TBL_ENTRY(0x102), TBL_ENTRY(0x103),
- TBL_ENTRY(0x104), TBL_ENTRY(0x105), TBL_ENTRY(0x106), TBL_ENTRY(0x107),
- TBL_ENTRY(0x108), TBL_ENTRY(0x109), TBL_ENTRY(0x10a), TBL_ENTRY(0x10b),
- TBL_ENTRY(0x10c), TBL_ENTRY(0x10d), TBL_ENTRY(0x10e), TBL_ENTRY(0x10f),
- TBL_ENTRY(0x110), TBL_ENTRY(0x111), TBL_ENTRY(0x112), TBL_ENTRY(0x113),
- TBL_ENTRY(0x114), TBL_ENTRY(0x115), TBL_ENTRY(0x116), TBL_ENTRY(0x117),
- TBL_ENTRY(0x118), TBL_ENTRY(0x119), TBL_ENTRY(0x11a), TBL_ENTRY(0x11b),
- TBL_ENTRY(0x11c), TBL_ENTRY(0x11d), TBL_ENTRY(0x11e), TBL_ENTRY(0x11f),
- TBL_ENTRY(0x120), TBL_ENTRY(0x121), TBL_ENTRY(0x122), TBL_ENTRY(0x123),
- TBL_ENTRY(0x124), TBL_ENTRY(0x125), TBL_ENTRY(0x126), TBL_ENTRY(0x127),
- TBL_ENTRY(0x128), TBL_ENTRY(0x129), TBL_ENTRY(0x12a), TBL_ENTRY(0x12b),
- TBL_ENTRY(0x12c), TBL_ENTRY(0x12d), TBL_ENTRY(0x12e), TBL_ENTRY(0x12f),
- TBL_ENTRY(0x130), TBL_ENTRY(0x131), TBL_ENTRY(0x132), TBL_ENTRY(0x133),
- TBL_ENTRY(0x134), TBL_ENTRY(0x135), TBL_ENTRY(0x136), TBL_ENTRY(0x137),
- TBL_ENTRY(0x138), TBL_ENTRY(0x139), TBL_ENTRY(0x13a), TBL_ENTRY(0x13b),
- TBL_ENTRY(0x13c), TBL_ENTRY(0x13d), TBL_ENTRY(0x13e), TBL_ENTRY(0x13f),
- TBL_ENTRY(0x140), TBL_ENTRY(0x141), TBL_ENTRY(0x142), TBL_ENTRY(0x143),
- TBL_ENTRY(0x144), TBL_ENTRY(0x145), TBL_ENTRY(0x146), TBL_ENTRY(0x147),
- TBL_ENTRY(0x148), TBL_ENTRY(0x149), TBL_ENTRY(0x14a), TBL_ENTRY(0x14b),
- TBL_ENTRY(0x14c), TBL_ENTRY(0x14d), TBL_ENTRY(0x14e), TBL_ENTRY(0x14f),
- TBL_ENTRY(0x150), TBL_ENTRY(0x151), TBL_ENTRY(0x152), TBL_ENTRY(0x153),
- TBL_ENTRY(0x154), TBL_ENTRY(0x155), TBL_ENTRY(0x156), TBL_ENTRY(0x157),
- TBL_ENTRY(0x158), TBL_ENTRY(0x159), TBL_ENTRY(0x15a), TBL_ENTRY(0x15b),
- TBL_ENTRY(0x15c), TBL_ENTRY(0x15d), TBL_ENTRY(0x15e), TBL_ENTRY(0x15f),
- TBL_ENTRY(0x160), TBL_ENTRY(0x161), TBL_ENTRY(0x162), TBL_ENTRY(0x163),
- TBL_ENTRY(0x164), TBL_ENTRY(0x165), TBL_ENTRY(0x166), TBL_ENTRY(0x167),
- TBL_ENTRY(0x168), TBL_ENTRY(0x169), TBL_ENTRY(0x16a), TBL_ENTRY(0x16b),
- TBL_ENTRY(0x16c), TBL_ENTRY(0x16d), TBL_ENTRY(0x16e), TBL_ENTRY(0x16f),
- TBL_ENTRY(0x170), TBL_ENTRY(0x171), TBL_ENTRY(0x172), TBL_ENTRY(0x173),
- TBL_ENTRY(0x174), TBL_ENTRY(0x175), TBL_ENTRY(0x176), TBL_ENTRY(0x177),
- TBL_ENTRY(0x178), TBL_ENTRY(0x179), TBL_ENTRY(0x17a), TBL_ENTRY(0x17b),
- TBL_ENTRY(0x17c), TBL_ENTRY(0x17d), TBL_ENTRY(0x17e), TBL_ENTRY(0x17f),
- TBL_ENTRY(0x180), TBL_ENTRY(0x181), TBL_ENTRY(0x182), TBL_ENTRY(0x183),
- TBL_ENTRY(0x184), TBL_ENTRY(0x185), TBL_ENTRY(0x186), TBL_ENTRY(0x187),
- TBL_ENTRY(0x188), TBL_ENTRY(0x189), TBL_ENTRY(0x18a), TBL_ENTRY(0x18b),
- TBL_ENTRY(0x18c), TBL_ENTRY(0x18d), TBL_ENTRY(0x18e), TBL_ENTRY(0x18f),
- TBL_ENTRY(0x190), TBL_ENTRY(0x191), TBL_ENTRY(0x192), TBL_ENTRY(0x193),
- TBL_ENTRY(0x194), TBL_ENTRY(0x195), TBL_ENTRY(0x196), TBL_ENTRY(0x197),
- TBL_ENTRY(0x198), TBL_ENTRY(0x199), TBL_ENTRY(0x19a), TBL_ENTRY(0x19b),
- TBL_ENTRY(0x19c), TBL_ENTRY(0x19d), TBL_ENTRY(0x19e), TBL_ENTRY(0x19f),
- TBL_ENTRY(0x1a0), TBL_ENTRY(0x1a1), TBL_ENTRY(0x1a2), TBL_ENTRY(0x1a3),
- TBL_ENTRY(0x1a4), TBL_ENTRY(0x1a5), TBL_ENTRY(0x1a6), TBL_ENTRY(0x1a7),
- TBL_ENTRY(0x1a8), TBL_ENTRY(0x1a9), TBL_ENTRY(0x1aa), TBL_ENTRY(0x1ab),
- TBL_ENTRY(0x1ac), TBL_ENTRY(0x1ad), TBL_ENTRY(0x1ae), TBL_ENTRY(0x1af),
- TBL_ENTRY(0x1b0), TBL_ENTRY(0x1b1), TBL_ENTRY(0x1b2), TBL_ENTRY(0x1b3),
- TBL_ENTRY(0x1b4), TBL_ENTRY(0x1b5), TBL_ENTRY(0x1b6), TBL_ENTRY(0x1b7),
- TBL_ENTRY(0x1b8), TBL_ENTRY(0x1b9), TBL_ENTRY(0x1ba), TBL_ENTRY(0x1bb),
- TBL_ENTRY(0x1bc), TBL_ENTRY(0x1bd), TBL_ENTRY(0x1be), TBL_ENTRY(0x1bf),
- TBL_ENTRY(0x1c0), TBL_ENTRY(0x1c1), TBL_ENTRY(0x1c2), TBL_ENTRY(0x1c3),
- TBL_ENTRY(0x1c4), TBL_ENTRY(0x1c5), TBL_ENTRY(0x1c6), TBL_ENTRY(0x1c7),
- TBL_ENTRY(0x1c8), TBL_ENTRY(0x1c9), TBL_ENTRY(0x1ca), TBL_ENTRY(0x1cb),
- TBL_ENTRY(0x1cc), TBL_ENTRY(0x1cd), TBL_ENTRY(0x1ce), TBL_ENTRY(0x1cf),
- TBL_ENTRY(0x1d0), TBL_ENTRY(0x1d1), TBL_ENTRY(0x1d2), TBL_ENTRY(0x1d3),
- TBL_ENTRY(0x1d4), TBL_ENTRY(0x1d5), TBL_ENTRY(0x1d6), TBL_ENTRY(0x1d7),
- TBL_ENTRY(0x1d8), TBL_ENTRY(0x1d9), TBL_ENTRY(0x1da), TBL_ENTRY(0x1db),
- TBL_ENTRY(0x1dc), TBL_ENTRY(0x1dd), TBL_ENTRY(0x1de), TBL_ENTRY(0x1df),
- TBL_ENTRY(0x1e0), TBL_ENTRY(0x1e1), TBL_ENTRY(0x1e2), TBL_ENTRY(0x1e3),
- TBL_ENTRY(0x1e4), TBL_ENTRY(0x1e5), TBL_ENTRY(0x1e6), TBL_ENTRY(0x1e7),
- TBL_ENTRY(0x1e8), TBL_ENTRY(0x1e9), TBL_ENTRY(0x1ea), TBL_ENTRY(0x1eb),
- TBL_ENTRY(0x1ec), TBL_ENTRY(0x1ed), TBL_ENTRY(0x1ee), TBL_ENTRY(0x1ef),
- TBL_ENTRY(0x1f0), TBL_ENTRY(0x1f1), TBL_ENTRY(0x1f2), TBL_ENTRY(0x1f3),
- TBL_ENTRY(0x1f4), TBL_ENTRY(0x1f5), TBL_ENTRY(0x1f6), TBL_ENTRY(0x1f7),
- TBL_ENTRY(0x1f8), TBL_ENTRY(0x1f9), TBL_ENTRY(0x1fa), TBL_ENTRY(0x1fb),
- TBL_ENTRY(0x1fc), TBL_ENTRY(0x1fd), TBL_ENTRY(0x1fe), TBL_ENTRY(0x1ff),
- TBL_ENTRY(0x200), TBL_ENTRY(0x201), TBL_ENTRY(0x202), TBL_ENTRY(0x203),
- TBL_ENTRY(0x204), TBL_ENTRY(0x205), TBL_ENTRY(0x206), TBL_ENTRY(0x207),
- TBL_ENTRY(0x208), TBL_ENTRY(0x209), TBL_ENTRY(0x20a), TBL_ENTRY(0x20b),
- TBL_ENTRY(0x20c), TBL_ENTRY(0x20d), TBL_ENTRY(0x20e), TBL_ENTRY(0x20f),
- TBL_ENTRY(0x210), TBL_ENTRY(0x211), TBL_ENTRY(0x212), TBL_ENTRY(0x213),
- TBL_ENTRY(0x214), TBL_ENTRY(0x215), TBL_ENTRY(0x216), TBL_ENTRY(0x217),
- TBL_ENTRY(0x218), TBL_ENTRY(0x219), TBL_ENTRY(0x21a), TBL_ENTRY(0x21b),
- TBL_ENTRY(0x21c), TBL_ENTRY(0x21d), TBL_ENTRY(0x21e), TBL_ENTRY(0x21f),
- TBL_ENTRY(0x220), TBL_ENTRY(0x221), TBL_ENTRY(0x222), TBL_ENTRY(0x223),
- TBL_ENTRY(0x224), TBL_ENTRY(0x225), TBL_ENTRY(0x226), TBL_ENTRY(0x227),
- TBL_ENTRY(0x228), TBL_ENTRY(0x229), TBL_ENTRY(0x22a), TBL_ENTRY(0x22b),
- TBL_ENTRY(0x22c), TBL_ENTRY(0x22d), TBL_ENTRY(0x22e), TBL_ENTRY(0x22f),
- TBL_ENTRY(0x230), TBL_ENTRY(0x231), TBL_ENTRY(0x232), TBL_ENTRY(0x233),
- TBL_ENTRY(0x234), TBL_ENTRY(0x235), TBL_ENTRY(0x236), TBL_ENTRY(0x237),
- TBL_ENTRY(0x238), TBL_ENTRY(0x239), TBL_ENTRY(0x23a), TBL_ENTRY(0x23b),
- TBL_ENTRY(0x23c), TBL_ENTRY(0x23d), TBL_ENTRY(0x23e), TBL_ENTRY(0x23f),
- TBL_ENTRY(0x240), TBL_ENTRY(0x241), TBL_ENTRY(0x242), TBL_ENTRY(0x243),
- TBL_ENTRY(0x244), TBL_ENTRY(0x245), TBL_ENTRY(0x246), TBL_ENTRY(0x247),
- TBL_ENTRY(0x248), TBL_ENTRY(0x249), TBL_ENTRY(0x24a), TBL_ENTRY(0x24b),
- TBL_ENTRY(0x24c), TBL_ENTRY(0x24d), TBL_ENTRY(0x24e), TBL_ENTRY(0x24f),
- TBL_ENTRY(0x250), TBL_ENTRY(0x251), TBL_ENTRY(0x252), TBL_ENTRY(0x253),
- TBL_ENTRY(0x254), TBL_ENTRY(0x255), TBL_ENTRY(0x256), TBL_ENTRY(0x257),
- TBL_ENTRY(0x258), TBL_ENTRY(0x259), TBL_ENTRY(0x25a), TBL_ENTRY(0x25b),
- TBL_ENTRY(0x25c), TBL_ENTRY(0x25d), TBL_ENTRY(0x25e), TBL_ENTRY(0x25f),
- TBL_ENTRY(0x260), TBL_ENTRY(0x261), TBL_ENTRY(0x262), TBL_ENTRY(0x263),
- TBL_ENTRY(0x264), TBL_ENTRY(0x265), TBL_ENTRY(0x266), TBL_ENTRY(0x267),
- TBL_ENTRY(0x268), TBL_ENTRY(0x269), TBL_ENTRY(0x26a), TBL_ENTRY(0x26b),
- TBL_ENTRY(0x26c), TBL_ENTRY(0x26d), TBL_ENTRY(0x26e), TBL_ENTRY(0x26f),
- TBL_ENTRY(0x270), TBL_ENTRY(0x271), TBL_ENTRY(0x272), TBL_ENTRY(0x273),
- TBL_ENTRY(0x274), TBL_ENTRY(0x275), TBL_ENTRY(0x276), TBL_ENTRY(0x277),
- TBL_ENTRY(0x278), TBL_ENTRY(0x279), TBL_ENTRY(0x27a), TBL_ENTRY(0x27b),
- TBL_ENTRY(0x27c), TBL_ENTRY(0x27d), TBL_ENTRY(0x27e), TBL_ENTRY(0x27f),
- TBL_ENTRY(0x280), TBL_ENTRY(0x281), TBL_ENTRY(0x282), TBL_ENTRY(0x283),
- TBL_ENTRY(0x284), TBL_ENTRY(0x285), TBL_ENTRY(0x286), TBL_ENTRY(0x287),
- TBL_ENTRY(0x288), TBL_ENTRY(0x289), TBL_ENTRY(0x28a), TBL_ENTRY(0x28b),
- TBL_ENTRY(0x28c), TBL_ENTRY(0x28d), TBL_ENTRY(0x28e), TBL_ENTRY(0x28f),
- TBL_ENTRY(0x290), TBL_ENTRY(0x291), TBL_ENTRY(0x292), TBL_ENTRY(0x293),
- TBL_ENTRY(0x294), TBL_ENTRY(0x295), TBL_ENTRY(0x296), TBL_ENTRY(0x297),
- TBL_ENTRY(0x298), TBL_ENTRY(0x299), TBL_ENTRY(0x29a), TBL_ENTRY(0x29b),
- TBL_ENTRY(0x29c), TBL_ENTRY(0x29d), TBL_ENTRY(0x29e), TBL_ENTRY(0x29f),
- TBL_ENTRY(0x2a0), TBL_ENTRY(0x2a1), TBL_ENTRY(0x2a2), TBL_ENTRY(0x2a3),
- TBL_ENTRY(0x2a4), TBL_ENTRY(0x2a5), TBL_ENTRY(0x2a6), TBL_ENTRY(0x2a7),
- TBL_ENTRY(0x2a8), TBL_ENTRY(0x2a9), TBL_ENTRY(0x2aa), TBL_ENTRY(0x2ab),
- TBL_ENTRY(0x2ac), TBL_ENTRY(0x2ad), TBL_ENTRY(0x2ae), TBL_ENTRY(0x2af),
- TBL_ENTRY(0x2b0), TBL_ENTRY(0x2b1), TBL_ENTRY(0x2b2), TBL_ENTRY(0x2b3),
- TBL_ENTRY(0x2b4), TBL_ENTRY(0x2b5), TBL_ENTRY(0x2b6), TBL_ENTRY(0x2b7),
- TBL_ENTRY(0x2b8), TBL_ENTRY(0x2b9), TBL_ENTRY(0x2ba), TBL_ENTRY(0x2bb),
- TBL_ENTRY(0x2bc), TBL_ENTRY(0x2bd), TBL_ENTRY(0x2be), TBL_ENTRY(0x2bf),
- TBL_ENTRY(0x2c0), TBL_ENTRY(0x2c1), TBL_ENTRY(0x2c2), TBL_ENTRY(0x2c3),
- TBL_ENTRY(0x2c4), TBL_ENTRY(0x2c5), TBL_ENTRY(0x2c6), TBL_ENTRY(0x2c7),
- TBL_ENTRY(0x2c8), TBL_ENTRY(0x2c9), TBL_ENTRY(0x2ca), TBL_ENTRY(0x2cb),
- TBL_ENTRY(0x2cc), TBL_ENTRY(0x2cd), TBL_ENTRY(0x2ce), TBL_ENTRY(0x2cf),
- TBL_ENTRY(0x2d0), TBL_ENTRY(0x2d1), TBL_ENTRY(0x2d2), TBL_ENTRY(0x2d3),
- TBL_ENTRY(0x2d4), TBL_ENTRY(0x2d5), TBL_ENTRY(0x2d6), TBL_ENTRY(0x2d7),
- TBL_ENTRY(0x2d8), TBL_ENTRY(0x2d9), TBL_ENTRY(0x2da), TBL_ENTRY(0x2db),
- TBL_ENTRY(0x2dc), TBL_ENTRY(0x2dd), TBL_ENTRY(0x2de), TBL_ENTRY(0x2df),
- TBL_ENTRY(0x2e0), TBL_ENTRY(0x2e1), TBL_ENTRY(0x2e2), TBL_ENTRY(0x2e3),
- TBL_ENTRY(0x2e4), TBL_ENTRY(0x2e5), TBL_ENTRY(0x2e6), TBL_ENTRY(0x2e7),
- TBL_ENTRY(0x2e8), TBL_ENTRY(0x2e9), TBL_ENTRY(0x2ea), TBL_ENTRY(0x2eb),
- TBL_ENTRY(0x2ec), TBL_ENTRY(0x2ed), TBL_ENTRY(0x2ee), TBL_ENTRY(0x2ef),
- TBL_ENTRY(0x2f0), TBL_ENTRY(0x2f1), TBL_ENTRY(0x2f2), TBL_ENTRY(0x2f3),
- TBL_ENTRY(0x2f4), TBL_ENTRY(0x2f5), TBL_ENTRY(0x2f6), TBL_ENTRY(0x2f7),
- TBL_ENTRY(0x2f8), TBL_ENTRY(0x2f9), TBL_ENTRY(0x2fa), TBL_ENTRY(0x2fb),
- TBL_ENTRY(0x2fc), TBL_ENTRY(0x2fd), TBL_ENTRY(0x2fe), TBL_ENTRY(0x2ff),
- TBL_ENTRY(0x300), TBL_ENTRY(0x301), TBL_ENTRY(0x302), TBL_ENTRY(0x303),
- TBL_ENTRY(0x304), TBL_ENTRY(0x305), TBL_ENTRY(0x306), TBL_ENTRY(0x307),
- TBL_ENTRY(0x308), TBL_ENTRY(0x309), TBL_ENTRY(0x30a), TBL_ENTRY(0x30b),
- TBL_ENTRY(0x30c), TBL_ENTRY(0x30d), TBL_ENTRY(0x30e), TBL_ENTRY(0x30f),
- TBL_ENTRY(0x310), TBL_ENTRY(0x311), TBL_ENTRY(0x312), TBL_ENTRY(0x313),
- TBL_ENTRY(0x314), TBL_ENTRY(0x315), TBL_ENTRY(0x316), TBL_ENTRY(0x317),
- TBL_ENTRY(0x318), TBL_ENTRY(0x319), TBL_ENTRY(0x31a), TBL_ENTRY(0x31b),
- TBL_ENTRY(0x31c), TBL_ENTRY(0x31d), TBL_ENTRY(0x31e), TBL_ENTRY(0x31f),
- TBL_ENTRY(0x320), TBL_ENTRY(0x321), TBL_ENTRY(0x322), TBL_ENTRY(0x323),
- TBL_ENTRY(0x324), TBL_ENTRY(0x325), TBL_ENTRY(0x326), TBL_ENTRY(0x327),
- TBL_ENTRY(0x328), TBL_ENTRY(0x329), TBL_ENTRY(0x32a), TBL_ENTRY(0x32b),
- TBL_ENTRY(0x32c), TBL_ENTRY(0x32d), TBL_ENTRY(0x32e), TBL_ENTRY(0x32f),
- TBL_ENTRY(0x330), TBL_ENTRY(0x331), TBL_ENTRY(0x332), TBL_ENTRY(0x333),
- TBL_ENTRY(0x334), TBL_ENTRY(0x335), TBL_ENTRY(0x336), TBL_ENTRY(0x337),
- TBL_ENTRY(0x338), TBL_ENTRY(0x339), TBL_ENTRY(0x33a), TBL_ENTRY(0x33b),
- TBL_ENTRY(0x33c), TBL_ENTRY(0x33d), TBL_ENTRY(0x33e), TBL_ENTRY(0x33f),
- TBL_ENTRY(0x340), TBL_ENTRY(0x341), TBL_ENTRY(0x342), TBL_ENTRY(0x343),
- TBL_ENTRY(0x344), TBL_ENTRY(0x345), TBL_ENTRY(0x346), TBL_ENTRY(0x347),
- TBL_ENTRY(0x348), TBL_ENTRY(0x349), TBL_ENTRY(0x34a), TBL_ENTRY(0x34b),
- TBL_ENTRY(0x34c), TBL_ENTRY(0x34d), TBL_ENTRY(0x34e), TBL_ENTRY(0x34f),
- TBL_ENTRY(0x350), TBL_ENTRY(0x351), TBL_ENTRY(0x352), TBL_ENTRY(0x353),
- TBL_ENTRY(0x354), TBL_ENTRY(0x355), TBL_ENTRY(0x356), TBL_ENTRY(0x357),
- TBL_ENTRY(0x358), TBL_ENTRY(0x359), TBL_ENTRY(0x35a), TBL_ENTRY(0x35b),
- TBL_ENTRY(0x35c), TBL_ENTRY(0x35d), TBL_ENTRY(0x35e), TBL_ENTRY(0x35f),
- TBL_ENTRY(0x360), TBL_ENTRY(0x361), TBL_ENTRY(0x362), TBL_ENTRY(0x363),
- TBL_ENTRY(0x364), TBL_ENTRY(0x365), TBL_ENTRY(0x366), TBL_ENTRY(0x367),
- TBL_ENTRY(0x368), TBL_ENTRY(0x369), TBL_ENTRY(0x36a), TBL_ENTRY(0x36b),
- TBL_ENTRY(0x36c), TBL_ENTRY(0x36d), TBL_ENTRY(0x36e), TBL_ENTRY(0x36f),
- TBL_ENTRY(0x370), TBL_ENTRY(0x371), TBL_ENTRY(0x372), TBL_ENTRY(0x373),
- TBL_ENTRY(0x374), TBL_ENTRY(0x375), TBL_ENTRY(0x376), TBL_ENTRY(0x377),
- TBL_ENTRY(0x378), TBL_ENTRY(0x379), TBL_ENTRY(0x37a), TBL_ENTRY(0x37b),
- TBL_ENTRY(0x37c), TBL_ENTRY(0x37d), TBL_ENTRY(0x37e), TBL_ENTRY(0x37f),
- TBL_ENTRY(0x380), TBL_ENTRY(0x381), TBL_ENTRY(0x382), TBL_ENTRY(0x383),
- TBL_ENTRY(0x384), TBL_ENTRY(0x385), TBL_ENTRY(0x386), TBL_ENTRY(0x387),
- TBL_ENTRY(0x388), TBL_ENTRY(0x389), TBL_ENTRY(0x38a), TBL_ENTRY(0x38b),
- TBL_ENTRY(0x38c), TBL_ENTRY(0x38d), TBL_ENTRY(0x38e), TBL_ENTRY(0x38f),
- TBL_ENTRY(0x390), TBL_ENTRY(0x391), TBL_ENTRY(0x392), TBL_ENTRY(0x393),
- TBL_ENTRY(0x394), TBL_ENTRY(0x395), TBL_ENTRY(0x396), TBL_ENTRY(0x397),
- TBL_ENTRY(0x398), TBL_ENTRY(0x399), TBL_ENTRY(0x39a), TBL_ENTRY(0x39b),
- TBL_ENTRY(0x39c), TBL_ENTRY(0x39d), TBL_ENTRY(0x39e), TBL_ENTRY(0x39f),
- TBL_ENTRY(0x3a0), TBL_ENTRY(0x3a1), TBL_ENTRY(0x3a2), TBL_ENTRY(0x3a3),
- TBL_ENTRY(0x3a4), TBL_ENTRY(0x3a5), TBL_ENTRY(0x3a6), TBL_ENTRY(0x3a7),
- TBL_ENTRY(0x3a8), TBL_ENTRY(0x3a9), TBL_ENTRY(0x3aa), TBL_ENTRY(0x3ab),
- TBL_ENTRY(0x3ac), TBL_ENTRY(0x3ad), TBL_ENTRY(0x3ae), TBL_ENTRY(0x3af),
- TBL_ENTRY(0x3b0), TBL_ENTRY(0x3b1), TBL_ENTRY(0x3b2), TBL_ENTRY(0x3b3),
- TBL_ENTRY(0x3b4), TBL_ENTRY(0x3b5), TBL_ENTRY(0x3b6), TBL_ENTRY(0x3b7),
- TBL_ENTRY(0x3b8), TBL_ENTRY(0x3b9), TBL_ENTRY(0x3ba), TBL_ENTRY(0x3bb),
- TBL_ENTRY(0x3bc), TBL_ENTRY(0x3bd), TBL_ENTRY(0x3be), TBL_ENTRY(0x3bf),
- TBL_ENTRY(0x3c0), TBL_ENTRY(0x3c1), TBL_ENTRY(0x3c2), TBL_ENTRY(0x3c3),
- TBL_ENTRY(0x3c4), TBL_ENTRY(0x3c5), TBL_ENTRY(0x3c6), TBL_ENTRY(0x3c7),
- TBL_ENTRY(0x3c8), TBL_ENTRY(0x3c9), TBL_ENTRY(0x3ca), TBL_ENTRY(0x3cb),
- TBL_ENTRY(0x3cc), TBL_ENTRY(0x3cd), TBL_ENTRY(0x3ce), TBL_ENTRY(0x3cf),
- TBL_ENTRY(0x3d0), TBL_ENTRY(0x3d1), TBL_ENTRY(0x3d2), TBL_ENTRY(0x3d3),
- TBL_ENTRY(0x3d4), TBL_ENTRY(0x3d5), TBL_ENTRY(0x3d6), TBL_ENTRY(0x3d7),
- TBL_ENTRY(0x3d8), TBL_ENTRY(0x3d9), TBL_ENTRY(0x3da), TBL_ENTRY(0x3db),
- TBL_ENTRY(0x3dc), TBL_ENTRY(0x3dd), TBL_ENTRY(0x3de), TBL_ENTRY(0x3df),
- TBL_ENTRY(0x3e0), TBL_ENTRY(0x3e1), TBL_ENTRY(0x3e2), TBL_ENTRY(0x3e3),
- TBL_ENTRY(0x3e4), TBL_ENTRY(0x3e5), TBL_ENTRY(0x3e6), TBL_ENTRY(0x3e7),
- TBL_ENTRY(0x3e8), TBL_ENTRY(0x3e9), TBL_ENTRY(0x3ea), TBL_ENTRY(0x3eb),
- TBL_ENTRY(0x3ec), TBL_ENTRY(0x3ed), TBL_ENTRY(0x3ee), TBL_ENTRY(0x3ef),
- TBL_ENTRY(0x3f0), TBL_ENTRY(0x3f1), TBL_ENTRY(0x3f2), TBL_ENTRY(0x3f3),
- TBL_ENTRY(0x3f4), TBL_ENTRY(0x3f5), TBL_ENTRY(0x3f6), TBL_ENTRY(0x3f7),
- TBL_ENTRY(0x3f8), TBL_ENTRY(0x3f9), TBL_ENTRY(0x3fa), TBL_ENTRY(0x3fb),
- TBL_ENTRY(0x3fc), TBL_ENTRY(0x3fd), TBL_ENTRY(0x3fe), TBL_ENTRY(0x3ff),
- TBL_ENTRY(0x400), TBL_ENTRY(0x401), TBL_ENTRY(0x402), TBL_ENTRY(0x403),
- TBL_ENTRY(0x404), TBL_ENTRY(0x405), TBL_ENTRY(0x406), TBL_ENTRY(0x407),
- TBL_ENTRY(0x408), TBL_ENTRY(0x409), TBL_ENTRY(0x40a), TBL_ENTRY(0x40b),
- TBL_ENTRY(0x40c), TBL_ENTRY(0x40d), TBL_ENTRY(0x40e), TBL_ENTRY(0x40f),
- TBL_ENTRY(0x410), TBL_ENTRY(0x411), TBL_ENTRY(0x412), TBL_ENTRY(0x413),
- TBL_ENTRY(0x414), TBL_ENTRY(0x415), TBL_ENTRY(0x416), TBL_ENTRY(0x417),
- TBL_ENTRY(0x418), TBL_ENTRY(0x419), TBL_ENTRY(0x41a), TBL_ENTRY(0x41b),
- TBL_ENTRY(0x41c), TBL_ENTRY(0x41d), TBL_ENTRY(0x41e), TBL_ENTRY(0x41f),
- TBL_ENTRY(0x420), TBL_ENTRY(0x421), TBL_ENTRY(0x422), TBL_ENTRY(0x423),
- TBL_ENTRY(0x424), TBL_ENTRY(0x425), TBL_ENTRY(0x426), TBL_ENTRY(0x427),
- TBL_ENTRY(0x428), TBL_ENTRY(0x429), TBL_ENTRY(0x42a), TBL_ENTRY(0x42b),
- TBL_ENTRY(0x42c), TBL_ENTRY(0x42d), TBL_ENTRY(0x42e), TBL_ENTRY(0x42f),
- TBL_ENTRY(0x430), TBL_ENTRY(0x431), TBL_ENTRY(0x432), TBL_ENTRY(0x433),
- TBL_ENTRY(0x434), TBL_ENTRY(0x435), TBL_ENTRY(0x436), TBL_ENTRY(0x437),
- TBL_ENTRY(0x438), TBL_ENTRY(0x439), TBL_ENTRY(0x43a), TBL_ENTRY(0x43b),
- TBL_ENTRY(0x43c), TBL_ENTRY(0x43d), TBL_ENTRY(0x43e), TBL_ENTRY(0x43f),
- TBL_ENTRY(0x440), TBL_ENTRY(0x441), TBL_ENTRY(0x442), TBL_ENTRY(0x443),
- TBL_ENTRY(0x444), TBL_ENTRY(0x445), TBL_ENTRY(0x446), TBL_ENTRY(0x447),
- TBL_ENTRY(0x448), TBL_ENTRY(0x449), TBL_ENTRY(0x44a), TBL_ENTRY(0x44b),
- TBL_ENTRY(0x44c), TBL_ENTRY(0x44d), TBL_ENTRY(0x44e), TBL_ENTRY(0x44f),
- TBL_ENTRY(0x450), TBL_ENTRY(0x451), TBL_ENTRY(0x452), TBL_ENTRY(0x453),
- TBL_ENTRY(0x454), TBL_ENTRY(0x455), TBL_ENTRY(0x456), TBL_ENTRY(0x457),
- TBL_ENTRY(0x458), TBL_ENTRY(0x459), TBL_ENTRY(0x45a), TBL_ENTRY(0x45b),
- TBL_ENTRY(0x45c), TBL_ENTRY(0x45d), TBL_ENTRY(0x45e), TBL_ENTRY(0x45f),
- TBL_ENTRY(0x460), TBL_ENTRY(0x461), TBL_ENTRY(0x462), TBL_ENTRY(0x463),
- TBL_ENTRY(0x464), TBL_ENTRY(0x465), TBL_ENTRY(0x466), TBL_ENTRY(0x467),
- TBL_ENTRY(0x468), TBL_ENTRY(0x469), TBL_ENTRY(0x46a), TBL_ENTRY(0x46b),
- TBL_ENTRY(0x46c), TBL_ENTRY(0x46d), TBL_ENTRY(0x46e), TBL_ENTRY(0x46f),
- TBL_ENTRY(0x470), TBL_ENTRY(0x471), TBL_ENTRY(0x472), TBL_ENTRY(0x473),
- TBL_ENTRY(0x474), TBL_ENTRY(0x475), TBL_ENTRY(0x476), TBL_ENTRY(0x477),
- TBL_ENTRY(0x478), TBL_ENTRY(0x479), TBL_ENTRY(0x47a), TBL_ENTRY(0x47b),
- TBL_ENTRY(0x47c), TBL_ENTRY(0x47d), TBL_ENTRY(0x47e), TBL_ENTRY(0x47f),
- TBL_ENTRY(0x480), TBL_ENTRY(0x481), TBL_ENTRY(0x482), TBL_ENTRY(0x483),
- TBL_ENTRY(0x484), TBL_ENTRY(0x485), TBL_ENTRY(0x486), TBL_ENTRY(0x487),
- TBL_ENTRY(0x488), TBL_ENTRY(0x489), TBL_ENTRY(0x48a), TBL_ENTRY(0x48b),
- TBL_ENTRY(0x48c), TBL_ENTRY(0x48d), TBL_ENTRY(0x48e), TBL_ENTRY(0x48f),
- TBL_ENTRY(0x490), TBL_ENTRY(0x491), TBL_ENTRY(0x492), TBL_ENTRY(0x493),
- TBL_ENTRY(0x494), TBL_ENTRY(0x495), TBL_ENTRY(0x496), TBL_ENTRY(0x497),
- TBL_ENTRY(0x498), TBL_ENTRY(0x499), TBL_ENTRY(0x49a), TBL_ENTRY(0x49b),
- TBL_ENTRY(0x49c), TBL_ENTRY(0x49d), TBL_ENTRY(0x49e), TBL_ENTRY(0x49f),
- TBL_ENTRY(0x4a0), TBL_ENTRY(0x4a1), TBL_ENTRY(0x4a2), TBL_ENTRY(0x4a3),
- TBL_ENTRY(0x4a4), TBL_ENTRY(0x4a5), TBL_ENTRY(0x4a6), TBL_ENTRY(0x4a7),
- TBL_ENTRY(0x4a8), TBL_ENTRY(0x4a9), TBL_ENTRY(0x4aa), TBL_ENTRY(0x4ab),
- TBL_ENTRY(0x4ac), TBL_ENTRY(0x4ad), TBL_ENTRY(0x4ae), TBL_ENTRY(0x4af),
- TBL_ENTRY(0x4b0), TBL_ENTRY(0x4b1), TBL_ENTRY(0x4b2), TBL_ENTRY(0x4b3),
- TBL_ENTRY(0x4b4), TBL_ENTRY(0x4b5), TBL_ENTRY(0x4b6), TBL_ENTRY(0x4b7),
- TBL_ENTRY(0x4b8), TBL_ENTRY(0x4b9), TBL_ENTRY(0x4ba), TBL_ENTRY(0x4bb),
- TBL_ENTRY(0x4bc), TBL_ENTRY(0x4bd), TBL_ENTRY(0x4be), TBL_ENTRY(0x4bf),
- TBL_ENTRY(0x4c0), TBL_ENTRY(0x4c1), TBL_ENTRY(0x4c2), TBL_ENTRY(0x4c3),
- TBL_ENTRY(0x4c4), TBL_ENTRY(0x4c5), TBL_ENTRY(0x4c6), TBL_ENTRY(0x4c7),
- TBL_ENTRY(0x4c8), TBL_ENTRY(0x4c9), TBL_ENTRY(0x4ca), TBL_ENTRY(0x4cb),
- TBL_ENTRY(0x4cc), TBL_ENTRY(0x4cd), TBL_ENTRY(0x4ce), TBL_ENTRY(0x4cf),
- TBL_ENTRY(0x4d0), TBL_ENTRY(0x4d1), TBL_ENTRY(0x4d2), TBL_ENTRY(0x4d3),
- TBL_ENTRY(0x4d4), TBL_ENTRY(0x4d5), TBL_ENTRY(0x4d6), TBL_ENTRY(0x4d7),
- TBL_ENTRY(0x4d8), TBL_ENTRY(0x4d9), TBL_ENTRY(0x4da), TBL_ENTRY(0x4db),
- TBL_ENTRY(0x4dc), TBL_ENTRY(0x4dd), TBL_ENTRY(0x4de), TBL_ENTRY(0x4df),
- TBL_ENTRY(0x4e0), TBL_ENTRY(0x4e1), TBL_ENTRY(0x4e2), TBL_ENTRY(0x4e3),
- TBL_ENTRY(0x4e4), TBL_ENTRY(0x4e5), TBL_ENTRY(0x4e6), TBL_ENTRY(0x4e7),
- TBL_ENTRY(0x4e8), TBL_ENTRY(0x4e9), TBL_ENTRY(0x4ea), TBL_ENTRY(0x4eb),
- TBL_ENTRY(0x4ec), TBL_ENTRY(0x4ed), TBL_ENTRY(0x4ee), TBL_ENTRY(0x4ef),
- TBL_ENTRY(0x4f0), TBL_ENTRY(0x4f1), TBL_ENTRY(0x4f2), TBL_ENTRY(0x4f3),
- TBL_ENTRY(0x4f4), TBL_ENTRY(0x4f5), TBL_ENTRY(0x4f6), TBL_ENTRY(0x4f7),
- TBL_ENTRY(0x4f8), TBL_ENTRY(0x4f9), TBL_ENTRY(0x4fa), TBL_ENTRY(0x4fb),
- TBL_ENTRY(0x4fc), TBL_ENTRY(0x4fd), TBL_ENTRY(0x4fe), TBL_ENTRY(0x4ff),
- TBL_ENTRY(0x500), TBL_ENTRY(0x501), TBL_ENTRY(0x502), TBL_ENTRY(0x503),
- TBL_ENTRY(0x504), TBL_ENTRY(0x505), TBL_ENTRY(0x506), TBL_ENTRY(0x507),
- TBL_ENTRY(0x508), TBL_ENTRY(0x509), TBL_ENTRY(0x50a), TBL_ENTRY(0x50b),
- TBL_ENTRY(0x50c), TBL_ENTRY(0x50d), TBL_ENTRY(0x50e), TBL_ENTRY(0x50f),
- TBL_ENTRY(0x510), TBL_ENTRY(0x511), TBL_ENTRY(0x512), TBL_ENTRY(0x513),
- TBL_ENTRY(0x514), TBL_ENTRY(0x515), TBL_ENTRY(0x516), TBL_ENTRY(0x517),
- TBL_ENTRY(0x518), TBL_ENTRY(0x519), TBL_ENTRY(0x51a), TBL_ENTRY(0x51b),
- TBL_ENTRY(0x51c), TBL_ENTRY(0x51d), TBL_ENTRY(0x51e), TBL_ENTRY(0x51f),
- TBL_ENTRY(0x520), TBL_ENTRY(0x521), TBL_ENTRY(0x522), TBL_ENTRY(0x523),
- TBL_ENTRY(0x524), TBL_ENTRY(0x525), TBL_ENTRY(0x526), TBL_ENTRY(0x527),
- TBL_ENTRY(0x528), TBL_ENTRY(0x529), TBL_ENTRY(0x52a), TBL_ENTRY(0x52b),
- TBL_ENTRY(0x52c), TBL_ENTRY(0x52d), TBL_ENTRY(0x52e), TBL_ENTRY(0x52f),
- TBL_ENTRY(0x530), TBL_ENTRY(0x531), TBL_ENTRY(0x532), TBL_ENTRY(0x533),
- TBL_ENTRY(0x534), TBL_ENTRY(0x535), TBL_ENTRY(0x536), TBL_ENTRY(0x537),
- TBL_ENTRY(0x538), TBL_ENTRY(0x539), TBL_ENTRY(0x53a), TBL_ENTRY(0x53b),
- TBL_ENTRY(0x53c), TBL_ENTRY(0x53d), TBL_ENTRY(0x53e), TBL_ENTRY(0x53f),
- TBL_ENTRY(0x540), TBL_ENTRY(0x541), TBL_ENTRY(0x542), TBL_ENTRY(0x543),
- TBL_ENTRY(0x544), TBL_ENTRY(0x545), TBL_ENTRY(0x546), TBL_ENTRY(0x547),
- TBL_ENTRY(0x548), TBL_ENTRY(0x549), TBL_ENTRY(0x54a), TBL_ENTRY(0x54b),
- TBL_ENTRY(0x54c), TBL_ENTRY(0x54d), TBL_ENTRY(0x54e), TBL_ENTRY(0x54f),
- TBL_ENTRY(0x550), TBL_ENTRY(0x551), TBL_ENTRY(0x552), TBL_ENTRY(0x553),
- TBL_ENTRY(0x554), TBL_ENTRY(0x555), TBL_ENTRY(0x556), TBL_ENTRY(0x557),
- TBL_ENTRY(0x558), TBL_ENTRY(0x559), TBL_ENTRY(0x55a), TBL_ENTRY(0x55b),
- TBL_ENTRY(0x55c), TBL_ENTRY(0x55d), TBL_ENTRY(0x55e), TBL_ENTRY(0x55f),
- TBL_ENTRY(0x560), TBL_ENTRY(0x561), TBL_ENTRY(0x562), TBL_ENTRY(0x563),
- TBL_ENTRY(0x564), TBL_ENTRY(0x565), TBL_ENTRY(0x566), TBL_ENTRY(0x567),
- TBL_ENTRY(0x568), TBL_ENTRY(0x569), TBL_ENTRY(0x56a), TBL_ENTRY(0x56b),
- TBL_ENTRY(0x56c), TBL_ENTRY(0x56d), TBL_ENTRY(0x56e), TBL_ENTRY(0x56f),
- TBL_ENTRY(0x570), TBL_ENTRY(0x571), TBL_ENTRY(0x572), TBL_ENTRY(0x573),
- TBL_ENTRY(0x574), TBL_ENTRY(0x575), TBL_ENTRY(0x576), TBL_ENTRY(0x577),
- TBL_ENTRY(0x578), TBL_ENTRY(0x579), TBL_ENTRY(0x57a), TBL_ENTRY(0x57b),
- TBL_ENTRY(0x57c), TBL_ENTRY(0x57d), TBL_ENTRY(0x57e), TBL_ENTRY(0x57f),
- TBL_ENTRY(0x580), TBL_ENTRY(0x581), TBL_ENTRY(0x582), TBL_ENTRY(0x583),
- TBL_ENTRY(0x584), TBL_ENTRY(0x585), TBL_ENTRY(0x586), TBL_ENTRY(0x587),
- TBL_ENTRY(0x588), TBL_ENTRY(0x589), TBL_ENTRY(0x58a), TBL_ENTRY(0x58b),
- TBL_ENTRY(0x58c), TBL_ENTRY(0x58d), TBL_ENTRY(0x58e), TBL_ENTRY(0x58f),
- TBL_ENTRY(0x590), TBL_ENTRY(0x591), TBL_ENTRY(0x592), TBL_ENTRY(0x593),
- TBL_ENTRY(0x594), TBL_ENTRY(0x595), TBL_ENTRY(0x596), TBL_ENTRY(0x597),
- TBL_ENTRY(0x598), TBL_ENTRY(0x599), TBL_ENTRY(0x59a), TBL_ENTRY(0x59b),
- TBL_ENTRY(0x59c), TBL_ENTRY(0x59d), TBL_ENTRY(0x59e), TBL_ENTRY(0x59f),
- TBL_ENTRY(0x5a0), TBL_ENTRY(0x5a1), TBL_ENTRY(0x5a2), TBL_ENTRY(0x5a3),
- TBL_ENTRY(0x5a4), TBL_ENTRY(0x5a5), TBL_ENTRY(0x5a6), TBL_ENTRY(0x5a7),
- TBL_ENTRY(0x5a8), TBL_ENTRY(0x5a9), TBL_ENTRY(0x5aa), TBL_ENTRY(0x5ab),
- TBL_ENTRY(0x5ac), TBL_ENTRY(0x5ad), TBL_ENTRY(0x5ae), TBL_ENTRY(0x5af),
- TBL_ENTRY(0x5b0), TBL_ENTRY(0x5b1), TBL_ENTRY(0x5b2), TBL_ENTRY(0x5b3),
- TBL_ENTRY(0x5b4), TBL_ENTRY(0x5b5), TBL_ENTRY(0x5b6), TBL_ENTRY(0x5b7),
- TBL_ENTRY(0x5b8), TBL_ENTRY(0x5b9), TBL_ENTRY(0x5ba), TBL_ENTRY(0x5bb),
- TBL_ENTRY(0x5bc), TBL_ENTRY(0x5bd), TBL_ENTRY(0x5be), TBL_ENTRY(0x5bf),
- TBL_ENTRY(0x5c0), TBL_ENTRY(0x5c1), TBL_ENTRY(0x5c2), TBL_ENTRY(0x5c3),
- TBL_ENTRY(0x5c4), TBL_ENTRY(0x5c5), TBL_ENTRY(0x5c6), TBL_ENTRY(0x5c7),
- TBL_ENTRY(0x5c8), TBL_ENTRY(0x5c9), TBL_ENTRY(0x5ca), TBL_ENTRY(0x5cb),
- TBL_ENTRY(0x5cc), TBL_ENTRY(0x5cd), TBL_ENTRY(0x5ce), TBL_ENTRY(0x5cf),
- TBL_ENTRY(0x5d0), TBL_ENTRY(0x5d1), TBL_ENTRY(0x5d2), TBL_ENTRY(0x5d3),
- TBL_ENTRY(0x5d4), TBL_ENTRY(0x5d5), TBL_ENTRY(0x5d6), TBL_ENTRY(0x5d7),
- TBL_ENTRY(0x5d8), TBL_ENTRY(0x5d9), TBL_ENTRY(0x5da), TBL_ENTRY(0x5db),
- TBL_ENTRY(0x5dc), TBL_ENTRY(0x5dd), TBL_ENTRY(0x5de), TBL_ENTRY(0x5df),
- TBL_ENTRY(0x5e0), TBL_ENTRY(0x5e1), TBL_ENTRY(0x5e2), TBL_ENTRY(0x5e3),
- TBL_ENTRY(0x5e4), TBL_ENTRY(0x5e5), TBL_ENTRY(0x5e6), TBL_ENTRY(0x5e7),
- TBL_ENTRY(0x5e8), TBL_ENTRY(0x5e9), TBL_ENTRY(0x5ea), TBL_ENTRY(0x5eb),
- TBL_ENTRY(0x5ec), TBL_ENTRY(0x5ed), TBL_ENTRY(0x5ee), TBL_ENTRY(0x5ef),
- TBL_ENTRY(0x5f0), TBL_ENTRY(0x5f1), TBL_ENTRY(0x5f2), TBL_ENTRY(0x5f3),
- TBL_ENTRY(0x5f4), TBL_ENTRY(0x5f5), TBL_ENTRY(0x5f6), TBL_ENTRY(0x5f7),
- TBL_ENTRY(0x5f8), TBL_ENTRY(0x5f9), TBL_ENTRY(0x5fa), TBL_ENTRY(0x5fb),
- TBL_ENTRY(0x5fc), TBL_ENTRY(0x5fd), TBL_ENTRY(0x5fe), TBL_ENTRY(0x5ff),
- TBL_ENTRY(0x600), TBL_ENTRY(0x601), TBL_ENTRY(0x602), TBL_ENTRY(0x603),
- TBL_ENTRY(0x604), TBL_ENTRY(0x605), TBL_ENTRY(0x606), TBL_ENTRY(0x607),
- TBL_ENTRY(0x608), TBL_ENTRY(0x609), TBL_ENTRY(0x60a), TBL_ENTRY(0x60b),
- TBL_ENTRY(0x60c), TBL_ENTRY(0x60d), TBL_ENTRY(0x60e), TBL_ENTRY(0x60f),
- TBL_ENTRY(0x610), TBL_ENTRY(0x611), TBL_ENTRY(0x612), TBL_ENTRY(0x613),
- TBL_ENTRY(0x614), TBL_ENTRY(0x615), TBL_ENTRY(0x616), TBL_ENTRY(0x617),
- TBL_ENTRY(0x618), TBL_ENTRY(0x619), TBL_ENTRY(0x61a), TBL_ENTRY(0x61b),
- TBL_ENTRY(0x61c), TBL_ENTRY(0x61d), TBL_ENTRY(0x61e), TBL_ENTRY(0x61f),
- TBL_ENTRY(0x620), TBL_ENTRY(0x621), TBL_ENTRY(0x622), TBL_ENTRY(0x623),
- TBL_ENTRY(0x624), TBL_ENTRY(0x625), TBL_ENTRY(0x626), TBL_ENTRY(0x627),
- TBL_ENTRY(0x628), TBL_ENTRY(0x629), TBL_ENTRY(0x62a), TBL_ENTRY(0x62b),
- TBL_ENTRY(0x62c), TBL_ENTRY(0x62d), TBL_ENTRY(0x62e), TBL_ENTRY(0x62f),
- TBL_ENTRY(0x630), TBL_ENTRY(0x631), TBL_ENTRY(0x632), TBL_ENTRY(0x633),
- TBL_ENTRY(0x634), TBL_ENTRY(0x635), TBL_ENTRY(0x636), TBL_ENTRY(0x637),
- TBL_ENTRY(0x638), TBL_ENTRY(0x639), TBL_ENTRY(0x63a), TBL_ENTRY(0x63b),
- TBL_ENTRY(0x63c), TBL_ENTRY(0x63d), TBL_ENTRY(0x63e), TBL_ENTRY(0x63f),
- TBL_ENTRY(0x640), TBL_ENTRY(0x641), TBL_ENTRY(0x642), TBL_ENTRY(0x643),
- TBL_ENTRY(0x644), TBL_ENTRY(0x645), TBL_ENTRY(0x646), TBL_ENTRY(0x647),
- TBL_ENTRY(0x648), TBL_ENTRY(0x649), TBL_ENTRY(0x64a), TBL_ENTRY(0x64b),
- TBL_ENTRY(0x64c), TBL_ENTRY(0x64d), TBL_ENTRY(0x64e), TBL_ENTRY(0x64f),
- TBL_ENTRY(0x650), TBL_ENTRY(0x651), TBL_ENTRY(0x652), TBL_ENTRY(0x653),
- TBL_ENTRY(0x654), TBL_ENTRY(0x655), TBL_ENTRY(0x656), TBL_ENTRY(0x657),
- TBL_ENTRY(0x658), TBL_ENTRY(0x659), TBL_ENTRY(0x65a), TBL_ENTRY(0x65b),
- TBL_ENTRY(0x65c), TBL_ENTRY(0x65d), TBL_ENTRY(0x65e), TBL_ENTRY(0x65f),
- TBL_ENTRY(0x660), TBL_ENTRY(0x661), TBL_ENTRY(0x662), TBL_ENTRY(0x663),
- TBL_ENTRY(0x664), TBL_ENTRY(0x665), TBL_ENTRY(0x666), TBL_ENTRY(0x667),
- TBL_ENTRY(0x668), TBL_ENTRY(0x669), TBL_ENTRY(0x66a), TBL_ENTRY(0x66b),
- TBL_ENTRY(0x66c), TBL_ENTRY(0x66d), TBL_ENTRY(0x66e), TBL_ENTRY(0x66f),
- TBL_ENTRY(0x670), TBL_ENTRY(0x671), TBL_ENTRY(0x672), TBL_ENTRY(0x673),
- TBL_ENTRY(0x674), TBL_ENTRY(0x675), TBL_ENTRY(0x676), TBL_ENTRY(0x677),
- TBL_ENTRY(0x678), TBL_ENTRY(0x679), TBL_ENTRY(0x67a), TBL_ENTRY(0x67b),
- TBL_ENTRY(0x67c), TBL_ENTRY(0x67d), TBL_ENTRY(0x67e), TBL_ENTRY(0x67f),
- TBL_ENTRY(0x680), TBL_ENTRY(0x681), TBL_ENTRY(0x682), TBL_ENTRY(0x683),
- TBL_ENTRY(0x684), TBL_ENTRY(0x685), TBL_ENTRY(0x686), TBL_ENTRY(0x687),
- TBL_ENTRY(0x688), TBL_ENTRY(0x689), TBL_ENTRY(0x68a), TBL_ENTRY(0x68b),
- TBL_ENTRY(0x68c), TBL_ENTRY(0x68d), TBL_ENTRY(0x68e), TBL_ENTRY(0x68f),
- TBL_ENTRY(0x690), TBL_ENTRY(0x691), TBL_ENTRY(0x692), TBL_ENTRY(0x693),
- TBL_ENTRY(0x694), TBL_ENTRY(0x695), TBL_ENTRY(0x696), TBL_ENTRY(0x697),
- TBL_ENTRY(0x698), TBL_ENTRY(0x699), TBL_ENTRY(0x69a), TBL_ENTRY(0x69b),
- TBL_ENTRY(0x69c), TBL_ENTRY(0x69d), TBL_ENTRY(0x69e), TBL_ENTRY(0x69f),
- TBL_ENTRY(0x6a0), TBL_ENTRY(0x6a1), TBL_ENTRY(0x6a2), TBL_ENTRY(0x6a3),
- TBL_ENTRY(0x6a4), TBL_ENTRY(0x6a5), TBL_ENTRY(0x6a6), TBL_ENTRY(0x6a7),
- TBL_ENTRY(0x6a8), TBL_ENTRY(0x6a9), TBL_ENTRY(0x6aa), TBL_ENTRY(0x6ab),
- TBL_ENTRY(0x6ac), TBL_ENTRY(0x6ad), TBL_ENTRY(0x6ae), TBL_ENTRY(0x6af),
- TBL_ENTRY(0x6b0), TBL_ENTRY(0x6b1), TBL_ENTRY(0x6b2), TBL_ENTRY(0x6b3),
- TBL_ENTRY(0x6b4), TBL_ENTRY(0x6b5), TBL_ENTRY(0x6b6), TBL_ENTRY(0x6b7),
- TBL_ENTRY(0x6b8), TBL_ENTRY(0x6b9), TBL_ENTRY(0x6ba), TBL_ENTRY(0x6bb),
- TBL_ENTRY(0x6bc), TBL_ENTRY(0x6bd), TBL_ENTRY(0x6be), TBL_ENTRY(0x6bf),
- TBL_ENTRY(0x6c0), TBL_ENTRY(0x6c1), TBL_ENTRY(0x6c2), TBL_ENTRY(0x6c3),
- TBL_ENTRY(0x6c4), TBL_ENTRY(0x6c5), TBL_ENTRY(0x6c6), TBL_ENTRY(0x6c7),
- TBL_ENTRY(0x6c8), TBL_ENTRY(0x6c9), TBL_ENTRY(0x6ca), TBL_ENTRY(0x6cb),
- TBL_ENTRY(0x6cc), TBL_ENTRY(0x6cd), TBL_ENTRY(0x6ce), TBL_ENTRY(0x6cf),
- TBL_ENTRY(0x6d0), TBL_ENTRY(0x6d1), TBL_ENTRY(0x6d2), TBL_ENTRY(0x6d3),
- TBL_ENTRY(0x6d4), TBL_ENTRY(0x6d5), TBL_ENTRY(0x6d6), TBL_ENTRY(0x6d7),
- TBL_ENTRY(0x6d8), TBL_ENTRY(0x6d9), TBL_ENTRY(0x6da), TBL_ENTRY(0x6db),
- TBL_ENTRY(0x6dc), TBL_ENTRY(0x6dd), TBL_ENTRY(0x6de), TBL_ENTRY(0x6df),
- TBL_ENTRY(0x6e0), TBL_ENTRY(0x6e1), TBL_ENTRY(0x6e2), TBL_ENTRY(0x6e3),
- TBL_ENTRY(0x6e4), TBL_ENTRY(0x6e5), TBL_ENTRY(0x6e6), TBL_ENTRY(0x6e7),
- TBL_ENTRY(0x6e8), TBL_ENTRY(0x6e9), TBL_ENTRY(0x6ea), TBL_ENTRY(0x6eb),
- TBL_ENTRY(0x6ec), TBL_ENTRY(0x6ed), TBL_ENTRY(0x6ee), TBL_ENTRY(0x6ef),
- TBL_ENTRY(0x6f0), TBL_ENTRY(0x6f1), TBL_ENTRY(0x6f2), TBL_ENTRY(0x6f3),
- TBL_ENTRY(0x6f4), TBL_ENTRY(0x6f5), TBL_ENTRY(0x6f6), TBL_ENTRY(0x6f7),
- TBL_ENTRY(0x6f8), TBL_ENTRY(0x6f9), TBL_ENTRY(0x6fa), TBL_ENTRY(0x6fb),
- TBL_ENTRY(0x6fc), TBL_ENTRY(0x6fd), TBL_ENTRY(0x6fe), TBL_ENTRY(0x6ff),
- TBL_ENTRY(0x700), TBL_ENTRY(0x701), TBL_ENTRY(0x702), TBL_ENTRY(0x703),
- TBL_ENTRY(0x704), TBL_ENTRY(0x705), TBL_ENTRY(0x706), TBL_ENTRY(0x707),
- TBL_ENTRY(0x708), TBL_ENTRY(0x709), TBL_ENTRY(0x70a), TBL_ENTRY(0x70b),
- TBL_ENTRY(0x70c), TBL_ENTRY(0x70d), TBL_ENTRY(0x70e), TBL_ENTRY(0x70f),
- TBL_ENTRY(0x710), TBL_ENTRY(0x711), TBL_ENTRY(0x712), TBL_ENTRY(0x713),
- TBL_ENTRY(0x714), TBL_ENTRY(0x715), TBL_ENTRY(0x716), TBL_ENTRY(0x717),
- TBL_ENTRY(0x718), TBL_ENTRY(0x719), TBL_ENTRY(0x71a), TBL_ENTRY(0x71b),
- TBL_ENTRY(0x71c), TBL_ENTRY(0x71d), TBL_ENTRY(0x71e), TBL_ENTRY(0x71f),
- TBL_ENTRY(0x720), TBL_ENTRY(0x721), TBL_ENTRY(0x722), TBL_ENTRY(0x723),
- TBL_ENTRY(0x724), TBL_ENTRY(0x725), TBL_ENTRY(0x726), TBL_ENTRY(0x727),
- TBL_ENTRY(0x728), TBL_ENTRY(0x729), TBL_ENTRY(0x72a), TBL_ENTRY(0x72b),
- TBL_ENTRY(0x72c), TBL_ENTRY(0x72d), TBL_ENTRY(0x72e), TBL_ENTRY(0x72f),
- TBL_ENTRY(0x730), TBL_ENTRY(0x731), TBL_ENTRY(0x732), TBL_ENTRY(0x733),
- TBL_ENTRY(0x734), TBL_ENTRY(0x735), TBL_ENTRY(0x736), TBL_ENTRY(0x737),
- TBL_ENTRY(0x738), TBL_ENTRY(0x739), TBL_ENTRY(0x73a), TBL_ENTRY(0x73b),
- TBL_ENTRY(0x73c), TBL_ENTRY(0x73d), TBL_ENTRY(0x73e), TBL_ENTRY(0x73f),
- TBL_ENTRY(0x740), TBL_ENTRY(0x741), TBL_ENTRY(0x742), TBL_ENTRY(0x743),
- TBL_ENTRY(0x744), TBL_ENTRY(0x745), TBL_ENTRY(0x746), TBL_ENTRY(0x747),
- TBL_ENTRY(0x748), TBL_ENTRY(0x749), TBL_ENTRY(0x74a), TBL_ENTRY(0x74b),
- TBL_ENTRY(0x74c), TBL_ENTRY(0x74d), TBL_ENTRY(0x74e), TBL_ENTRY(0x74f),
- TBL_ENTRY(0x750), TBL_ENTRY(0x751), TBL_ENTRY(0x752), TBL_ENTRY(0x753),
- TBL_ENTRY(0x754), TBL_ENTRY(0x755), TBL_ENTRY(0x756), TBL_ENTRY(0x757),
- TBL_ENTRY(0x758), TBL_ENTRY(0x759), TBL_ENTRY(0x75a), TBL_ENTRY(0x75b),
- TBL_ENTRY(0x75c), TBL_ENTRY(0x75d), TBL_ENTRY(0x75e), TBL_ENTRY(0x75f),
- TBL_ENTRY(0x760), TBL_ENTRY(0x761), TBL_ENTRY(0x762), TBL_ENTRY(0x763),
- TBL_ENTRY(0x764), TBL_ENTRY(0x765), TBL_ENTRY(0x766), TBL_ENTRY(0x767),
- TBL_ENTRY(0x768), TBL_ENTRY(0x769), TBL_ENTRY(0x76a), TBL_ENTRY(0x76b),
- TBL_ENTRY(0x76c), TBL_ENTRY(0x76d), TBL_ENTRY(0x76e), TBL_ENTRY(0x76f),
- TBL_ENTRY(0x770), TBL_ENTRY(0x771), TBL_ENTRY(0x772), TBL_ENTRY(0x773),
- TBL_ENTRY(0x774), TBL_ENTRY(0x775), TBL_ENTRY(0x776), TBL_ENTRY(0x777),
- TBL_ENTRY(0x778), TBL_ENTRY(0x779), TBL_ENTRY(0x77a), TBL_ENTRY(0x77b),
- TBL_ENTRY(0x77c), TBL_ENTRY(0x77d), TBL_ENTRY(0x77e), TBL_ENTRY(0x77f),
- TBL_ENTRY(0x780), TBL_ENTRY(0x781), TBL_ENTRY(0x782), TBL_ENTRY(0x783),
- TBL_ENTRY(0x784), TBL_ENTRY(0x785), TBL_ENTRY(0x786), TBL_ENTRY(0x787),
- TBL_ENTRY(0x788), TBL_ENTRY(0x789), TBL_ENTRY(0x78a), TBL_ENTRY(0x78b),
- TBL_ENTRY(0x78c), TBL_ENTRY(0x78d), TBL_ENTRY(0x78e), TBL_ENTRY(0x78f),
- TBL_ENTRY(0x790), TBL_ENTRY(0x791), TBL_ENTRY(0x792), TBL_ENTRY(0x793),
- TBL_ENTRY(0x794), TBL_ENTRY(0x795), TBL_ENTRY(0x796), TBL_ENTRY(0x797),
- TBL_ENTRY(0x798), TBL_ENTRY(0x799), TBL_ENTRY(0x79a), TBL_ENTRY(0x79b),
- TBL_ENTRY(0x79c), TBL_ENTRY(0x79d), TBL_ENTRY(0x79e), TBL_ENTRY(0x79f),
- TBL_ENTRY(0x7a0), TBL_ENTRY(0x7a1), TBL_ENTRY(0x7a2), TBL_ENTRY(0x7a3),
- TBL_ENTRY(0x7a4), TBL_ENTRY(0x7a5), TBL_ENTRY(0x7a6), TBL_ENTRY(0x7a7),
- TBL_ENTRY(0x7a8), TBL_ENTRY(0x7a9), TBL_ENTRY(0x7aa), TBL_ENTRY(0x7ab),
- TBL_ENTRY(0x7ac), TBL_ENTRY(0x7ad), TBL_ENTRY(0x7ae), TBL_ENTRY(0x7af),
- TBL_ENTRY(0x7b0), TBL_ENTRY(0x7b1), TBL_ENTRY(0x7b2), TBL_ENTRY(0x7b3),
- TBL_ENTRY(0x7b4), TBL_ENTRY(0x7b5), TBL_ENTRY(0x7b6), TBL_ENTRY(0x7b7),
- TBL_ENTRY(0x7b8), TBL_ENTRY(0x7b9), TBL_ENTRY(0x7ba), TBL_ENTRY(0x7bb),
- TBL_ENTRY(0x7bc), TBL_ENTRY(0x7bd), TBL_ENTRY(0x7be), TBL_ENTRY(0x7bf),
- TBL_ENTRY(0x7c0), TBL_ENTRY(0x7c1), TBL_ENTRY(0x7c2), TBL_ENTRY(0x7c3),
- TBL_ENTRY(0x7c4), TBL_ENTRY(0x7c5), TBL_ENTRY(0x7c6), TBL_ENTRY(0x7c7),
- TBL_ENTRY(0x7c8), TBL_ENTRY(0x7c9), TBL_ENTRY(0x7ca), TBL_ENTRY(0x7cb),
- TBL_ENTRY(0x7cc), TBL_ENTRY(0x7cd), TBL_ENTRY(0x7ce), TBL_ENTRY(0x7cf),
- TBL_ENTRY(0x7d0), TBL_ENTRY(0x7d1), TBL_ENTRY(0x7d2), TBL_ENTRY(0x7d3),
- TBL_ENTRY(0x7d4), TBL_ENTRY(0x7d5), TBL_ENTRY(0x7d6), TBL_ENTRY(0x7d7),
- TBL_ENTRY(0x7d8), TBL_ENTRY(0x7d9), TBL_ENTRY(0x7da), TBL_ENTRY(0x7db),
- TBL_ENTRY(0x7dc), TBL_ENTRY(0x7dd), TBL_ENTRY(0x7de), TBL_ENTRY(0x7df),
- TBL_ENTRY(0x7e0), TBL_ENTRY(0x7e1), TBL_ENTRY(0x7e2), TBL_ENTRY(0x7e3),
- TBL_ENTRY(0x7e4), TBL_ENTRY(0x7e5), TBL_ENTRY(0x7e6), TBL_ENTRY(0x7e7),
- TBL_ENTRY(0x7e8), TBL_ENTRY(0x7e9), TBL_ENTRY(0x7ea), TBL_ENTRY(0x7eb),
- TBL_ENTRY(0x7ec), TBL_ENTRY(0x7ed), TBL_ENTRY(0x7ee), TBL_ENTRY(0x7ef),
- TBL_ENTRY(0x7f0), TBL_ENTRY(0x7f1), TBL_ENTRY(0x7f2), TBL_ENTRY(0x7f3),
- TBL_ENTRY(0x7f4), TBL_ENTRY(0x7f5), TBL_ENTRY(0x7f6), TBL_ENTRY(0x7f7),
- TBL_ENTRY(0x7f8), TBL_ENTRY(0x7f9), TBL_ENTRY(0x7fa), TBL_ENTRY(0x7fb),
- TBL_ENTRY(0x7fc), TBL_ENTRY(0x7fd), TBL_ENTRY(0x7fe), TBL_ENTRY(0x7ff),
- TBL_ENTRY(0x800), TBL_ENTRY(0x801), TBL_ENTRY(0x802), TBL_ENTRY(0x803),
- TBL_ENTRY(0x804), TBL_ENTRY(0x805), TBL_ENTRY(0x806), TBL_ENTRY(0x807),
- TBL_ENTRY(0x808), TBL_ENTRY(0x809), TBL_ENTRY(0x80a), TBL_ENTRY(0x80b),
- TBL_ENTRY(0x80c), TBL_ENTRY(0x80d), TBL_ENTRY(0x80e), TBL_ENTRY(0x80f),
- TBL_ENTRY(0x810), TBL_ENTRY(0x811), TBL_ENTRY(0x812), TBL_ENTRY(0x813),
- TBL_ENTRY(0x814), TBL_ENTRY(0x815), TBL_ENTRY(0x816), TBL_ENTRY(0x817),
- TBL_ENTRY(0x818), TBL_ENTRY(0x819), TBL_ENTRY(0x81a), TBL_ENTRY(0x81b),
- TBL_ENTRY(0x81c), TBL_ENTRY(0x81d), TBL_ENTRY(0x81e), TBL_ENTRY(0x81f),
- TBL_ENTRY(0x820), TBL_ENTRY(0x821), TBL_ENTRY(0x822), TBL_ENTRY(0x823),
- TBL_ENTRY(0x824), TBL_ENTRY(0x825), TBL_ENTRY(0x826), TBL_ENTRY(0x827),
- TBL_ENTRY(0x828), TBL_ENTRY(0x829), TBL_ENTRY(0x82a), TBL_ENTRY(0x82b),
- TBL_ENTRY(0x82c), TBL_ENTRY(0x82d), TBL_ENTRY(0x82e), TBL_ENTRY(0x82f),
- TBL_ENTRY(0x830), TBL_ENTRY(0x831), TBL_ENTRY(0x832), TBL_ENTRY(0x833),
- TBL_ENTRY(0x834), TBL_ENTRY(0x835), TBL_ENTRY(0x836), TBL_ENTRY(0x837),
- TBL_ENTRY(0x838), TBL_ENTRY(0x839), TBL_ENTRY(0x83a), TBL_ENTRY(0x83b),
- TBL_ENTRY(0x83c), TBL_ENTRY(0x83d), TBL_ENTRY(0x83e), TBL_ENTRY(0x83f),
- TBL_ENTRY(0x840), TBL_ENTRY(0x841), TBL_ENTRY(0x842), TBL_ENTRY(0x843),
- TBL_ENTRY(0x844), TBL_ENTRY(0x845), TBL_ENTRY(0x846), TBL_ENTRY(0x847),
- TBL_ENTRY(0x848), TBL_ENTRY(0x849), TBL_ENTRY(0x84a), TBL_ENTRY(0x84b),
- TBL_ENTRY(0x84c), TBL_ENTRY(0x84d), TBL_ENTRY(0x84e), TBL_ENTRY(0x84f),
- TBL_ENTRY(0x850), TBL_ENTRY(0x851), TBL_ENTRY(0x852), TBL_ENTRY(0x853),
- TBL_ENTRY(0x854), TBL_ENTRY(0x855), TBL_ENTRY(0x856), TBL_ENTRY(0x857),
- TBL_ENTRY(0x858), TBL_ENTRY(0x859), TBL_ENTRY(0x85a), TBL_ENTRY(0x85b),
- TBL_ENTRY(0x85c), TBL_ENTRY(0x85d), TBL_ENTRY(0x85e), TBL_ENTRY(0x85f),
- TBL_ENTRY(0x860), TBL_ENTRY(0x861), TBL_ENTRY(0x862), TBL_ENTRY(0x863),
- TBL_ENTRY(0x864), TBL_ENTRY(0x865), TBL_ENTRY(0x866), TBL_ENTRY(0x867),
- TBL_ENTRY(0x868), TBL_ENTRY(0x869), TBL_ENTRY(0x86a), TBL_ENTRY(0x86b),
- TBL_ENTRY(0x86c), TBL_ENTRY(0x86d), TBL_ENTRY(0x86e), TBL_ENTRY(0x86f),
- TBL_ENTRY(0x870), TBL_ENTRY(0x871), TBL_ENTRY(0x872), TBL_ENTRY(0x873),
- TBL_ENTRY(0x874), TBL_ENTRY(0x875), TBL_ENTRY(0x876), TBL_ENTRY(0x877),
- TBL_ENTRY(0x878), TBL_ENTRY(0x879), TBL_ENTRY(0x87a), TBL_ENTRY(0x87b),
- TBL_ENTRY(0x87c), TBL_ENTRY(0x87d), TBL_ENTRY(0x87e), TBL_ENTRY(0x87f),
- TBL_ENTRY(0x880), TBL_ENTRY(0x881), TBL_ENTRY(0x882), TBL_ENTRY(0x883),
- TBL_ENTRY(0x884), TBL_ENTRY(0x885), TBL_ENTRY(0x886), TBL_ENTRY(0x887),
- TBL_ENTRY(0x888), TBL_ENTRY(0x889), TBL_ENTRY(0x88a), TBL_ENTRY(0x88b),
- TBL_ENTRY(0x88c), TBL_ENTRY(0x88d), TBL_ENTRY(0x88e), TBL_ENTRY(0x88f),
- TBL_ENTRY(0x890), TBL_ENTRY(0x891), TBL_ENTRY(0x892), TBL_ENTRY(0x893),
- TBL_ENTRY(0x894), TBL_ENTRY(0x895), TBL_ENTRY(0x896), TBL_ENTRY(0x897),
- TBL_ENTRY(0x898), TBL_ENTRY(0x899), TBL_ENTRY(0x89a), TBL_ENTRY(0x89b),
- TBL_ENTRY(0x89c), TBL_ENTRY(0x89d), TBL_ENTRY(0x89e), TBL_ENTRY(0x89f),
- TBL_ENTRY(0x8a0), TBL_ENTRY(0x8a1), TBL_ENTRY(0x8a2), TBL_ENTRY(0x8a3),
- TBL_ENTRY(0x8a4), TBL_ENTRY(0x8a5), TBL_ENTRY(0x8a6), TBL_ENTRY(0x8a7),
- TBL_ENTRY(0x8a8), TBL_ENTRY(0x8a9), TBL_ENTRY(0x8aa), TBL_ENTRY(0x8ab),
- TBL_ENTRY(0x8ac), TBL_ENTRY(0x8ad), TBL_ENTRY(0x8ae), TBL_ENTRY(0x8af),
- TBL_ENTRY(0x8b0), TBL_ENTRY(0x8b1), TBL_ENTRY(0x8b2), TBL_ENTRY(0x8b3),
- TBL_ENTRY(0x8b4), TBL_ENTRY(0x8b5), TBL_ENTRY(0x8b6), TBL_ENTRY(0x8b7),
- TBL_ENTRY(0x8b8), TBL_ENTRY(0x8b9), TBL_ENTRY(0x8ba), TBL_ENTRY(0x8bb),
- TBL_ENTRY(0x8bc), TBL_ENTRY(0x8bd), TBL_ENTRY(0x8be), TBL_ENTRY(0x8bf),
- TBL_ENTRY(0x8c0), TBL_ENTRY(0x8c1), TBL_ENTRY(0x8c2), TBL_ENTRY(0x8c3),
- TBL_ENTRY(0x8c4), TBL_ENTRY(0x8c5), TBL_ENTRY(0x8c6), TBL_ENTRY(0x8c7),
- TBL_ENTRY(0x8c8), TBL_ENTRY(0x8c9), TBL_ENTRY(0x8ca), TBL_ENTRY(0x8cb),
- TBL_ENTRY(0x8cc), TBL_ENTRY(0x8cd), TBL_ENTRY(0x8ce), TBL_ENTRY(0x8cf),
- TBL_ENTRY(0x8d0), TBL_ENTRY(0x8d1), TBL_ENTRY(0x8d2), TBL_ENTRY(0x8d3),
- TBL_ENTRY(0x8d4), TBL_ENTRY(0x8d5), TBL_ENTRY(0x8d6), TBL_ENTRY(0x8d7),
- TBL_ENTRY(0x8d8), TBL_ENTRY(0x8d9), TBL_ENTRY(0x8da), TBL_ENTRY(0x8db),
- TBL_ENTRY(0x8dc), TBL_ENTRY(0x8dd), TBL_ENTRY(0x8de), TBL_ENTRY(0x8df),
- TBL_ENTRY(0x8e0), TBL_ENTRY(0x8e1), TBL_ENTRY(0x8e2), TBL_ENTRY(0x8e3),
- TBL_ENTRY(0x8e4), TBL_ENTRY(0x8e5), TBL_ENTRY(0x8e6), TBL_ENTRY(0x8e7),
- TBL_ENTRY(0x8e8), TBL_ENTRY(0x8e9), TBL_ENTRY(0x8ea), TBL_ENTRY(0x8eb),
- TBL_ENTRY(0x8ec), TBL_ENTRY(0x8ed), TBL_ENTRY(0x8ee), TBL_ENTRY(0x8ef),
- TBL_ENTRY(0x8f0), TBL_ENTRY(0x8f1), TBL_ENTRY(0x8f2), TBL_ENTRY(0x8f3),
- TBL_ENTRY(0x8f4), TBL_ENTRY(0x8f5), TBL_ENTRY(0x8f6), TBL_ENTRY(0x8f7),
- TBL_ENTRY(0x8f8), TBL_ENTRY(0x8f9), TBL_ENTRY(0x8fa), TBL_ENTRY(0x8fb),
- TBL_ENTRY(0x8fc), TBL_ENTRY(0x8fd), TBL_ENTRY(0x8fe), TBL_ENTRY(0x8ff),
- TBL_ENTRY(0x900), TBL_ENTRY(0x901), TBL_ENTRY(0x902), TBL_ENTRY(0x903),
- TBL_ENTRY(0x904), TBL_ENTRY(0x905), TBL_ENTRY(0x906), TBL_ENTRY(0x907),
- TBL_ENTRY(0x908), TBL_ENTRY(0x909), TBL_ENTRY(0x90a), TBL_ENTRY(0x90b),
- TBL_ENTRY(0x90c), TBL_ENTRY(0x90d), TBL_ENTRY(0x90e), TBL_ENTRY(0x90f),
- TBL_ENTRY(0x910), TBL_ENTRY(0x911), TBL_ENTRY(0x912), TBL_ENTRY(0x913),
- TBL_ENTRY(0x914), TBL_ENTRY(0x915), TBL_ENTRY(0x916), TBL_ENTRY(0x917),
- TBL_ENTRY(0x918), TBL_ENTRY(0x919), TBL_ENTRY(0x91a), TBL_ENTRY(0x91b),
- TBL_ENTRY(0x91c), TBL_ENTRY(0x91d), TBL_ENTRY(0x91e), TBL_ENTRY(0x91f),
- TBL_ENTRY(0x920), TBL_ENTRY(0x921), TBL_ENTRY(0x922), TBL_ENTRY(0x923),
- TBL_ENTRY(0x924), TBL_ENTRY(0x925), TBL_ENTRY(0x926), TBL_ENTRY(0x927),
- TBL_ENTRY(0x928), TBL_ENTRY(0x929), TBL_ENTRY(0x92a), TBL_ENTRY(0x92b),
- TBL_ENTRY(0x92c), TBL_ENTRY(0x92d), TBL_ENTRY(0x92e), TBL_ENTRY(0x92f),
- TBL_ENTRY(0x930), TBL_ENTRY(0x931), TBL_ENTRY(0x932), TBL_ENTRY(0x933),
- TBL_ENTRY(0x934), TBL_ENTRY(0x935), TBL_ENTRY(0x936), TBL_ENTRY(0x937),
- TBL_ENTRY(0x938), TBL_ENTRY(0x939), TBL_ENTRY(0x93a), TBL_ENTRY(0x93b),
- TBL_ENTRY(0x93c), TBL_ENTRY(0x93d), TBL_ENTRY(0x93e), TBL_ENTRY(0x93f),
- TBL_ENTRY(0x940), TBL_ENTRY(0x941), TBL_ENTRY(0x942), TBL_ENTRY(0x943),
- TBL_ENTRY(0x944), TBL_ENTRY(0x945), TBL_ENTRY(0x946), TBL_ENTRY(0x947),
- TBL_ENTRY(0x948), TBL_ENTRY(0x949), TBL_ENTRY(0x94a), TBL_ENTRY(0x94b),
- TBL_ENTRY(0x94c), TBL_ENTRY(0x94d), TBL_ENTRY(0x94e), TBL_ENTRY(0x94f),
- TBL_ENTRY(0x950), TBL_ENTRY(0x951), TBL_ENTRY(0x952), TBL_ENTRY(0x953),
- TBL_ENTRY(0x954), TBL_ENTRY(0x955), TBL_ENTRY(0x956), TBL_ENTRY(0x957),
- TBL_ENTRY(0x958), TBL_ENTRY(0x959), TBL_ENTRY(0x95a), TBL_ENTRY(0x95b),
- TBL_ENTRY(0x95c), TBL_ENTRY(0x95d), TBL_ENTRY(0x95e), TBL_ENTRY(0x95f),
- TBL_ENTRY(0x960), TBL_ENTRY(0x961), TBL_ENTRY(0x962), TBL_ENTRY(0x963),
- TBL_ENTRY(0x964), TBL_ENTRY(0x965), TBL_ENTRY(0x966), TBL_ENTRY(0x967),
- TBL_ENTRY(0x968), TBL_ENTRY(0x969), TBL_ENTRY(0x96a), TBL_ENTRY(0x96b),
- TBL_ENTRY(0x96c), TBL_ENTRY(0x96d), TBL_ENTRY(0x96e), TBL_ENTRY(0x96f),
- TBL_ENTRY(0x970), TBL_ENTRY(0x971), TBL_ENTRY(0x972), TBL_ENTRY(0x973),
- TBL_ENTRY(0x974), TBL_ENTRY(0x975), TBL_ENTRY(0x976), TBL_ENTRY(0x977),
- TBL_ENTRY(0x978), TBL_ENTRY(0x979), TBL_ENTRY(0x97a), TBL_ENTRY(0x97b),
- TBL_ENTRY(0x97c), TBL_ENTRY(0x97d), TBL_ENTRY(0x97e), TBL_ENTRY(0x97f),
- TBL_ENTRY(0x980), TBL_ENTRY(0x981), TBL_ENTRY(0x982), TBL_ENTRY(0x983),
- TBL_ENTRY(0x984), TBL_ENTRY(0x985), TBL_ENTRY(0x986), TBL_ENTRY(0x987),
- TBL_ENTRY(0x988), TBL_ENTRY(0x989), TBL_ENTRY(0x98a), TBL_ENTRY(0x98b),
- TBL_ENTRY(0x98c), TBL_ENTRY(0x98d), TBL_ENTRY(0x98e), TBL_ENTRY(0x98f),
- TBL_ENTRY(0x990), TBL_ENTRY(0x991), TBL_ENTRY(0x992), TBL_ENTRY(0x993),
- TBL_ENTRY(0x994), TBL_ENTRY(0x995), TBL_ENTRY(0x996), TBL_ENTRY(0x997),
- TBL_ENTRY(0x998), TBL_ENTRY(0x999), TBL_ENTRY(0x99a), TBL_ENTRY(0x99b),
- TBL_ENTRY(0x99c), TBL_ENTRY(0x99d), TBL_ENTRY(0x99e), TBL_ENTRY(0x99f),
- TBL_ENTRY(0x9a0), TBL_ENTRY(0x9a1), TBL_ENTRY(0x9a2), TBL_ENTRY(0x9a3),
- TBL_ENTRY(0x9a4), TBL_ENTRY(0x9a5), TBL_ENTRY(0x9a6), TBL_ENTRY(0x9a7),
- TBL_ENTRY(0x9a8), TBL_ENTRY(0x9a9), TBL_ENTRY(0x9aa), TBL_ENTRY(0x9ab),
- TBL_ENTRY(0x9ac), TBL_ENTRY(0x9ad), TBL_ENTRY(0x9ae), TBL_ENTRY(0x9af),
- TBL_ENTRY(0x9b0), TBL_ENTRY(0x9b1), TBL_ENTRY(0x9b2), TBL_ENTRY(0x9b3),
- TBL_ENTRY(0x9b4), TBL_ENTRY(0x9b5), TBL_ENTRY(0x9b6), TBL_ENTRY(0x9b7),
- TBL_ENTRY(0x9b8), TBL_ENTRY(0x9b9), TBL_ENTRY(0x9ba), TBL_ENTRY(0x9bb),
- TBL_ENTRY(0x9bc), TBL_ENTRY(0x9bd), TBL_ENTRY(0x9be), TBL_ENTRY(0x9bf),
- TBL_ENTRY(0x9c0), TBL_ENTRY(0x9c1), TBL_ENTRY(0x9c2), TBL_ENTRY(0x9c3),
- TBL_ENTRY(0x9c4), TBL_ENTRY(0x9c5), TBL_ENTRY(0x9c6), TBL_ENTRY(0x9c7),
- TBL_ENTRY(0x9c8), TBL_ENTRY(0x9c9), TBL_ENTRY(0x9ca), TBL_ENTRY(0x9cb),
- TBL_ENTRY(0x9cc), TBL_ENTRY(0x9cd), TBL_ENTRY(0x9ce), TBL_ENTRY(0x9cf),
- TBL_ENTRY(0x9d0), TBL_ENTRY(0x9d1), TBL_ENTRY(0x9d2), TBL_ENTRY(0x9d3),
- TBL_ENTRY(0x9d4), TBL_ENTRY(0x9d5), TBL_ENTRY(0x9d6), TBL_ENTRY(0x9d7),
- TBL_ENTRY(0x9d8), TBL_ENTRY(0x9d9), TBL_ENTRY(0x9da), TBL_ENTRY(0x9db),
- TBL_ENTRY(0x9dc), TBL_ENTRY(0x9dd), TBL_ENTRY(0x9de), TBL_ENTRY(0x9df),
- TBL_ENTRY(0x9e0), TBL_ENTRY(0x9e1), TBL_ENTRY(0x9e2), TBL_ENTRY(0x9e3),
- TBL_ENTRY(0x9e4), TBL_ENTRY(0x9e5), TBL_ENTRY(0x9e6), TBL_ENTRY(0x9e7),
- TBL_ENTRY(0x9e8), TBL_ENTRY(0x9e9), TBL_ENTRY(0x9ea), TBL_ENTRY(0x9eb),
- TBL_ENTRY(0x9ec), TBL_ENTRY(0x9ed), TBL_ENTRY(0x9ee), TBL_ENTRY(0x9ef),
- TBL_ENTRY(0x9f0), TBL_ENTRY(0x9f1), TBL_ENTRY(0x9f2), TBL_ENTRY(0x9f3),
- TBL_ENTRY(0x9f4), TBL_ENTRY(0x9f5), TBL_ENTRY(0x9f6), TBL_ENTRY(0x9f7),
- TBL_ENTRY(0x9f8), TBL_ENTRY(0x9f9), TBL_ENTRY(0x9fa), TBL_ENTRY(0x9fb),
- TBL_ENTRY(0x9fc), TBL_ENTRY(0x9fd), TBL_ENTRY(0x9fe), TBL_ENTRY(0x9ff),
- TBL_ENTRY(0xa00), TBL_ENTRY(0xa01), TBL_ENTRY(0xa02), TBL_ENTRY(0xa03),
- TBL_ENTRY(0xa04), TBL_ENTRY(0xa05), TBL_ENTRY(0xa06), TBL_ENTRY(0xa07),
- TBL_ENTRY(0xa08), TBL_ENTRY(0xa09), TBL_ENTRY(0xa0a), TBL_ENTRY(0xa0b),
- TBL_ENTRY(0xa0c), TBL_ENTRY(0xa0d), TBL_ENTRY(0xa0e), TBL_ENTRY(0xa0f),
- TBL_ENTRY(0xa10), TBL_ENTRY(0xa11), TBL_ENTRY(0xa12), TBL_ENTRY(0xa13),
- TBL_ENTRY(0xa14), TBL_ENTRY(0xa15), TBL_ENTRY(0xa16), TBL_ENTRY(0xa17),
- TBL_ENTRY(0xa18), TBL_ENTRY(0xa19), TBL_ENTRY(0xa1a), TBL_ENTRY(0xa1b),
- TBL_ENTRY(0xa1c), TBL_ENTRY(0xa1d), TBL_ENTRY(0xa1e), TBL_ENTRY(0xa1f),
- TBL_ENTRY(0xa20), TBL_ENTRY(0xa21), TBL_ENTRY(0xa22), TBL_ENTRY(0xa23),
- TBL_ENTRY(0xa24), TBL_ENTRY(0xa25), TBL_ENTRY(0xa26), TBL_ENTRY(0xa27),
- TBL_ENTRY(0xa28), TBL_ENTRY(0xa29), TBL_ENTRY(0xa2a), TBL_ENTRY(0xa2b),
- TBL_ENTRY(0xa2c), TBL_ENTRY(0xa2d), TBL_ENTRY(0xa2e), TBL_ENTRY(0xa2f),
- TBL_ENTRY(0xa30), TBL_ENTRY(0xa31), TBL_ENTRY(0xa32), TBL_ENTRY(0xa33),
- TBL_ENTRY(0xa34), TBL_ENTRY(0xa35), TBL_ENTRY(0xa36), TBL_ENTRY(0xa37),
- TBL_ENTRY(0xa38), TBL_ENTRY(0xa39), TBL_ENTRY(0xa3a), TBL_ENTRY(0xa3b),
- TBL_ENTRY(0xa3c), TBL_ENTRY(0xa3d), TBL_ENTRY(0xa3e), TBL_ENTRY(0xa3f),
- TBL_ENTRY(0xa40), TBL_ENTRY(0xa41), TBL_ENTRY(0xa42), TBL_ENTRY(0xa43),
- TBL_ENTRY(0xa44), TBL_ENTRY(0xa45), TBL_ENTRY(0xa46), TBL_ENTRY(0xa47),
- TBL_ENTRY(0xa48), TBL_ENTRY(0xa49), TBL_ENTRY(0xa4a), TBL_ENTRY(0xa4b),
- TBL_ENTRY(0xa4c), TBL_ENTRY(0xa4d), TBL_ENTRY(0xa4e), TBL_ENTRY(0xa4f),
- TBL_ENTRY(0xa50), TBL_ENTRY(0xa51), TBL_ENTRY(0xa52), TBL_ENTRY(0xa53),
- TBL_ENTRY(0xa54), TBL_ENTRY(0xa55), TBL_ENTRY(0xa56), TBL_ENTRY(0xa57),
- TBL_ENTRY(0xa58), TBL_ENTRY(0xa59), TBL_ENTRY(0xa5a), TBL_ENTRY(0xa5b),
- TBL_ENTRY(0xa5c), TBL_ENTRY(0xa5d), TBL_ENTRY(0xa5e), TBL_ENTRY(0xa5f),
- TBL_ENTRY(0xa60), TBL_ENTRY(0xa61), TBL_ENTRY(0xa62), TBL_ENTRY(0xa63),
- TBL_ENTRY(0xa64), TBL_ENTRY(0xa65), TBL_ENTRY(0xa66), TBL_ENTRY(0xa67),
- TBL_ENTRY(0xa68), TBL_ENTRY(0xa69), TBL_ENTRY(0xa6a), TBL_ENTRY(0xa6b),
- TBL_ENTRY(0xa6c), TBL_ENTRY(0xa6d), TBL_ENTRY(0xa6e), TBL_ENTRY(0xa6f),
- TBL_ENTRY(0xa70), TBL_ENTRY(0xa71), TBL_ENTRY(0xa72), TBL_ENTRY(0xa73),
- TBL_ENTRY(0xa74), TBL_ENTRY(0xa75), TBL_ENTRY(0xa76), TBL_ENTRY(0xa77),
- TBL_ENTRY(0xa78), TBL_ENTRY(0xa79), TBL_ENTRY(0xa7a), TBL_ENTRY(0xa7b),
- TBL_ENTRY(0xa7c), TBL_ENTRY(0xa7d), TBL_ENTRY(0xa7e), TBL_ENTRY(0xa7f),
- TBL_ENTRY(0xa80), TBL_ENTRY(0xa81), TBL_ENTRY(0xa82), TBL_ENTRY(0xa83),
- TBL_ENTRY(0xa84), TBL_ENTRY(0xa85), TBL_ENTRY(0xa86), TBL_ENTRY(0xa87),
- TBL_ENTRY(0xa88), TBL_ENTRY(0xa89), TBL_ENTRY(0xa8a), TBL_ENTRY(0xa8b),
- TBL_ENTRY(0xa8c), TBL_ENTRY(0xa8d), TBL_ENTRY(0xa8e), TBL_ENTRY(0xa8f),
- TBL_ENTRY(0xa90), TBL_ENTRY(0xa91), TBL_ENTRY(0xa92), TBL_ENTRY(0xa93),
- TBL_ENTRY(0xa94), TBL_ENTRY(0xa95), TBL_ENTRY(0xa96), TBL_ENTRY(0xa97),
- TBL_ENTRY(0xa98), TBL_ENTRY(0xa99), TBL_ENTRY(0xa9a), TBL_ENTRY(0xa9b),
- TBL_ENTRY(0xa9c), TBL_ENTRY(0xa9d), TBL_ENTRY(0xa9e), TBL_ENTRY(0xa9f),
- TBL_ENTRY(0xaa0), TBL_ENTRY(0xaa1), TBL_ENTRY(0xaa2), TBL_ENTRY(0xaa3),
- TBL_ENTRY(0xaa4), TBL_ENTRY(0xaa5), TBL_ENTRY(0xaa6), TBL_ENTRY(0xaa7),
- TBL_ENTRY(0xaa8), TBL_ENTRY(0xaa9), TBL_ENTRY(0xaaa), TBL_ENTRY(0xaab),
- TBL_ENTRY(0xaac), TBL_ENTRY(0xaad), TBL_ENTRY(0xaae), TBL_ENTRY(0xaaf),
- TBL_ENTRY(0xab0), TBL_ENTRY(0xab1), TBL_ENTRY(0xab2), TBL_ENTRY(0xab3),
- TBL_ENTRY(0xab4), TBL_ENTRY(0xab5), TBL_ENTRY(0xab6), TBL_ENTRY(0xab7),
- TBL_ENTRY(0xab8), TBL_ENTRY(0xab9), TBL_ENTRY(0xaba), TBL_ENTRY(0xabb),
- TBL_ENTRY(0xabc), TBL_ENTRY(0xabd), TBL_ENTRY(0xabe), TBL_ENTRY(0xabf),
- TBL_ENTRY(0xac0), TBL_ENTRY(0xac1), TBL_ENTRY(0xac2), TBL_ENTRY(0xac3),
- TBL_ENTRY(0xac4), TBL_ENTRY(0xac5), TBL_ENTRY(0xac6), TBL_ENTRY(0xac7),
- TBL_ENTRY(0xac8), TBL_ENTRY(0xac9), TBL_ENTRY(0xaca), TBL_ENTRY(0xacb),
- TBL_ENTRY(0xacc), TBL_ENTRY(0xacd), TBL_ENTRY(0xace), TBL_ENTRY(0xacf),
- TBL_ENTRY(0xad0), TBL_ENTRY(0xad1), TBL_ENTRY(0xad2), TBL_ENTRY(0xad3),
- TBL_ENTRY(0xad4), TBL_ENTRY(0xad5), TBL_ENTRY(0xad6), TBL_ENTRY(0xad7),
- TBL_ENTRY(0xad8), TBL_ENTRY(0xad9), TBL_ENTRY(0xada), TBL_ENTRY(0xadb),
- TBL_ENTRY(0xadc), TBL_ENTRY(0xadd), TBL_ENTRY(0xade), TBL_ENTRY(0xadf),
- TBL_ENTRY(0xae0), TBL_ENTRY(0xae1), TBL_ENTRY(0xae2), TBL_ENTRY(0xae3),
- TBL_ENTRY(0xae4), TBL_ENTRY(0xae5), TBL_ENTRY(0xae6), TBL_ENTRY(0xae7),
- TBL_ENTRY(0xae8), TBL_ENTRY(0xae9), TBL_ENTRY(0xaea), TBL_ENTRY(0xaeb),
- TBL_ENTRY(0xaec), TBL_ENTRY(0xaed), TBL_ENTRY(0xaee), TBL_ENTRY(0xaef),
- TBL_ENTRY(0xaf0), TBL_ENTRY(0xaf1), TBL_ENTRY(0xaf2), TBL_ENTRY(0xaf3),
- TBL_ENTRY(0xaf4), TBL_ENTRY(0xaf5), TBL_ENTRY(0xaf6), TBL_ENTRY(0xaf7),
- TBL_ENTRY(0xaf8), TBL_ENTRY(0xaf9), TBL_ENTRY(0xafa), TBL_ENTRY(0xafb),
- TBL_ENTRY(0xafc), TBL_ENTRY(0xafd), TBL_ENTRY(0xafe), TBL_ENTRY(0xaff),
- TBL_ENTRY(0xb00), TBL_ENTRY(0xb01), TBL_ENTRY(0xb02), TBL_ENTRY(0xb03),
- TBL_ENTRY(0xb04), TBL_ENTRY(0xb05), TBL_ENTRY(0xb06), TBL_ENTRY(0xb07),
- TBL_ENTRY(0xb08), TBL_ENTRY(0xb09), TBL_ENTRY(0xb0a), TBL_ENTRY(0xb0b),
- TBL_ENTRY(0xb0c), TBL_ENTRY(0xb0d), TBL_ENTRY(0xb0e), TBL_ENTRY(0xb0f),
- TBL_ENTRY(0xb10), TBL_ENTRY(0xb11), TBL_ENTRY(0xb12), TBL_ENTRY(0xb13),
- TBL_ENTRY(0xb14), TBL_ENTRY(0xb15), TBL_ENTRY(0xb16), TBL_ENTRY(0xb17),
- TBL_ENTRY(0xb18), TBL_ENTRY(0xb19), TBL_ENTRY(0xb1a), TBL_ENTRY(0xb1b),
- TBL_ENTRY(0xb1c), TBL_ENTRY(0xb1d), TBL_ENTRY(0xb1e), TBL_ENTRY(0xb1f),
- TBL_ENTRY(0xb20), TBL_ENTRY(0xb21), TBL_ENTRY(0xb22), TBL_ENTRY(0xb23),
- TBL_ENTRY(0xb24), TBL_ENTRY(0xb25), TBL_ENTRY(0xb26), TBL_ENTRY(0xb27),
- TBL_ENTRY(0xb28), TBL_ENTRY(0xb29), TBL_ENTRY(0xb2a), TBL_ENTRY(0xb2b),
- TBL_ENTRY(0xb2c), TBL_ENTRY(0xb2d), TBL_ENTRY(0xb2e), TBL_ENTRY(0xb2f),
- TBL_ENTRY(0xb30), TBL_ENTRY(0xb31), TBL_ENTRY(0xb32), TBL_ENTRY(0xb33),
- TBL_ENTRY(0xb34), TBL_ENTRY(0xb35), TBL_ENTRY(0xb36), TBL_ENTRY(0xb37),
- TBL_ENTRY(0xb38), TBL_ENTRY(0xb39), TBL_ENTRY(0xb3a), TBL_ENTRY(0xb3b),
- TBL_ENTRY(0xb3c), TBL_ENTRY(0xb3d), TBL_ENTRY(0xb3e), TBL_ENTRY(0xb3f),
- TBL_ENTRY(0xb40), TBL_ENTRY(0xb41), TBL_ENTRY(0xb42), TBL_ENTRY(0xb43),
- TBL_ENTRY(0xb44), TBL_ENTRY(0xb45), TBL_ENTRY(0xb46), TBL_ENTRY(0xb47),
- TBL_ENTRY(0xb48), TBL_ENTRY(0xb49), TBL_ENTRY(0xb4a), TBL_ENTRY(0xb4b),
- TBL_ENTRY(0xb4c), TBL_ENTRY(0xb4d), TBL_ENTRY(0xb4e), TBL_ENTRY(0xb4f),
- TBL_ENTRY(0xb50), TBL_ENTRY(0xb51), TBL_ENTRY(0xb52), TBL_ENTRY(0xb53),
- TBL_ENTRY(0xb54), TBL_ENTRY(0xb55), TBL_ENTRY(0xb56), TBL_ENTRY(0xb57),
- TBL_ENTRY(0xb58), TBL_ENTRY(0xb59), TBL_ENTRY(0xb5a), TBL_ENTRY(0xb5b),
- TBL_ENTRY(0xb5c), TBL_ENTRY(0xb5d), TBL_ENTRY(0xb5e), TBL_ENTRY(0xb5f),
- TBL_ENTRY(0xb60), TBL_ENTRY(0xb61), TBL_ENTRY(0xb62), TBL_ENTRY(0xb63),
- TBL_ENTRY(0xb64), TBL_ENTRY(0xb65), TBL_ENTRY(0xb66), TBL_ENTRY(0xb67),
- TBL_ENTRY(0xb68), TBL_ENTRY(0xb69), TBL_ENTRY(0xb6a), TBL_ENTRY(0xb6b),
- TBL_ENTRY(0xb6c), TBL_ENTRY(0xb6d), TBL_ENTRY(0xb6e), TBL_ENTRY(0xb6f),
- TBL_ENTRY(0xb70), TBL_ENTRY(0xb71), TBL_ENTRY(0xb72), TBL_ENTRY(0xb73),
- TBL_ENTRY(0xb74), TBL_ENTRY(0xb75), TBL_ENTRY(0xb76), TBL_ENTRY(0xb77),
- TBL_ENTRY(0xb78), TBL_ENTRY(0xb79), TBL_ENTRY(0xb7a), TBL_ENTRY(0xb7b),
- TBL_ENTRY(0xb7c), TBL_ENTRY(0xb7d), TBL_ENTRY(0xb7e), TBL_ENTRY(0xb7f),
- TBL_ENTRY(0xb80), TBL_ENTRY(0xb81), TBL_ENTRY(0xb82), TBL_ENTRY(0xb83),
- TBL_ENTRY(0xb84), TBL_ENTRY(0xb85), TBL_ENTRY(0xb86), TBL_ENTRY(0xb87),
- TBL_ENTRY(0xb88), TBL_ENTRY(0xb89), TBL_ENTRY(0xb8a), TBL_ENTRY(0xb8b),
- TBL_ENTRY(0xb8c), TBL_ENTRY(0xb8d), TBL_ENTRY(0xb8e), TBL_ENTRY(0xb8f),
- TBL_ENTRY(0xb90), TBL_ENTRY(0xb91), TBL_ENTRY(0xb92), TBL_ENTRY(0xb93),
- TBL_ENTRY(0xb94), TBL_ENTRY(0xb95), TBL_ENTRY(0xb96), TBL_ENTRY(0xb97),
- TBL_ENTRY(0xb98), TBL_ENTRY(0xb99), TBL_ENTRY(0xb9a), TBL_ENTRY(0xb9b),
- TBL_ENTRY(0xb9c), TBL_ENTRY(0xb9d), TBL_ENTRY(0xb9e), TBL_ENTRY(0xb9f),
- TBL_ENTRY(0xba0), TBL_ENTRY(0xba1), TBL_ENTRY(0xba2), TBL_ENTRY(0xba3),
- TBL_ENTRY(0xba4), TBL_ENTRY(0xba5), TBL_ENTRY(0xba6), TBL_ENTRY(0xba7),
- TBL_ENTRY(0xba8), TBL_ENTRY(0xba9), TBL_ENTRY(0xbaa), TBL_ENTRY(0xbab),
- TBL_ENTRY(0xbac), TBL_ENTRY(0xbad), TBL_ENTRY(0xbae), TBL_ENTRY(0xbaf),
- TBL_ENTRY(0xbb0), TBL_ENTRY(0xbb1), TBL_ENTRY(0xbb2), TBL_ENTRY(0xbb3),
- TBL_ENTRY(0xbb4), TBL_ENTRY(0xbb5), TBL_ENTRY(0xbb6), TBL_ENTRY(0xbb7),
- TBL_ENTRY(0xbb8), TBL_ENTRY(0xbb9), TBL_ENTRY(0xbba), TBL_ENTRY(0xbbb),
- TBL_ENTRY(0xbbc), TBL_ENTRY(0xbbd), TBL_ENTRY(0xbbe), TBL_ENTRY(0xbbf),
- TBL_ENTRY(0xbc0), TBL_ENTRY(0xbc1), TBL_ENTRY(0xbc2), TBL_ENTRY(0xbc3),
- TBL_ENTRY(0xbc4), TBL_ENTRY(0xbc5), TBL_ENTRY(0xbc6), TBL_ENTRY(0xbc7),
- TBL_ENTRY(0xbc8), TBL_ENTRY(0xbc9), TBL_ENTRY(0xbca), TBL_ENTRY(0xbcb),
- TBL_ENTRY(0xbcc), TBL_ENTRY(0xbcd), TBL_ENTRY(0xbce), TBL_ENTRY(0xbcf),
- TBL_ENTRY(0xbd0), TBL_ENTRY(0xbd1), TBL_ENTRY(0xbd2), TBL_ENTRY(0xbd3),
- TBL_ENTRY(0xbd4), TBL_ENTRY(0xbd5), TBL_ENTRY(0xbd6), TBL_ENTRY(0xbd7),
- TBL_ENTRY(0xbd8), TBL_ENTRY(0xbd9), TBL_ENTRY(0xbda), TBL_ENTRY(0xbdb),
- TBL_ENTRY(0xbdc), TBL_ENTRY(0xbdd), TBL_ENTRY(0xbde), TBL_ENTRY(0xbdf),
- TBL_ENTRY(0xbe0), TBL_ENTRY(0xbe1), TBL_ENTRY(0xbe2), TBL_ENTRY(0xbe3),
- TBL_ENTRY(0xbe4), TBL_ENTRY(0xbe5), TBL_ENTRY(0xbe6), TBL_ENTRY(0xbe7),
- TBL_ENTRY(0xbe8), TBL_ENTRY(0xbe9), TBL_ENTRY(0xbea), TBL_ENTRY(0xbeb),
- TBL_ENTRY(0xbec), TBL_ENTRY(0xbed), TBL_ENTRY(0xbee), TBL_ENTRY(0xbef),
- TBL_ENTRY(0xbf0), TBL_ENTRY(0xbf1), TBL_ENTRY(0xbf2), TBL_ENTRY(0xbf3),
- TBL_ENTRY(0xbf4), TBL_ENTRY(0xbf5), TBL_ENTRY(0xbf6), TBL_ENTRY(0xbf7),
- TBL_ENTRY(0xbf8), TBL_ENTRY(0xbf9), TBL_ENTRY(0xbfa), TBL_ENTRY(0xbfb),
- TBL_ENTRY(0xbfc), TBL_ENTRY(0xbfd), TBL_ENTRY(0xbfe), TBL_ENTRY(0xbff),
- TBL_ENTRY(0xc00), TBL_ENTRY(0xc01), TBL_ENTRY(0xc02), TBL_ENTRY(0xc03),
- TBL_ENTRY(0xc04), TBL_ENTRY(0xc05), TBL_ENTRY(0xc06), TBL_ENTRY(0xc07),
- TBL_ENTRY(0xc08), TBL_ENTRY(0xc09), TBL_ENTRY(0xc0a), TBL_ENTRY(0xc0b),
- TBL_ENTRY(0xc0c), TBL_ENTRY(0xc0d), TBL_ENTRY(0xc0e), TBL_ENTRY(0xc0f),
- TBL_ENTRY(0xc10), TBL_ENTRY(0xc11), TBL_ENTRY(0xc12), TBL_ENTRY(0xc13),
- TBL_ENTRY(0xc14), TBL_ENTRY(0xc15), TBL_ENTRY(0xc16), TBL_ENTRY(0xc17),
- TBL_ENTRY(0xc18), TBL_ENTRY(0xc19), TBL_ENTRY(0xc1a), TBL_ENTRY(0xc1b),
- TBL_ENTRY(0xc1c), TBL_ENTRY(0xc1d), TBL_ENTRY(0xc1e), TBL_ENTRY(0xc1f),
- TBL_ENTRY(0xc20), TBL_ENTRY(0xc21), TBL_ENTRY(0xc22), TBL_ENTRY(0xc23),
- TBL_ENTRY(0xc24), TBL_ENTRY(0xc25), TBL_ENTRY(0xc26), TBL_ENTRY(0xc27),
- TBL_ENTRY(0xc28), TBL_ENTRY(0xc29), TBL_ENTRY(0xc2a), TBL_ENTRY(0xc2b),
- TBL_ENTRY(0xc2c), TBL_ENTRY(0xc2d), TBL_ENTRY(0xc2e), TBL_ENTRY(0xc2f),
- TBL_ENTRY(0xc30), TBL_ENTRY(0xc31), TBL_ENTRY(0xc32), TBL_ENTRY(0xc33),
- TBL_ENTRY(0xc34), TBL_ENTRY(0xc35), TBL_ENTRY(0xc36), TBL_ENTRY(0xc37),
- TBL_ENTRY(0xc38), TBL_ENTRY(0xc39), TBL_ENTRY(0xc3a), TBL_ENTRY(0xc3b),
- TBL_ENTRY(0xc3c), TBL_ENTRY(0xc3d), TBL_ENTRY(0xc3e), TBL_ENTRY(0xc3f),
- TBL_ENTRY(0xc40), TBL_ENTRY(0xc41), TBL_ENTRY(0xc42), TBL_ENTRY(0xc43),
- TBL_ENTRY(0xc44), TBL_ENTRY(0xc45), TBL_ENTRY(0xc46), TBL_ENTRY(0xc47),
- TBL_ENTRY(0xc48), TBL_ENTRY(0xc49), TBL_ENTRY(0xc4a), TBL_ENTRY(0xc4b),
- TBL_ENTRY(0xc4c), TBL_ENTRY(0xc4d), TBL_ENTRY(0xc4e), TBL_ENTRY(0xc4f),
- TBL_ENTRY(0xc50), TBL_ENTRY(0xc51), TBL_ENTRY(0xc52), TBL_ENTRY(0xc53),
- TBL_ENTRY(0xc54), TBL_ENTRY(0xc55), TBL_ENTRY(0xc56), TBL_ENTRY(0xc57),
- TBL_ENTRY(0xc58), TBL_ENTRY(0xc59), TBL_ENTRY(0xc5a), TBL_ENTRY(0xc5b),
- TBL_ENTRY(0xc5c), TBL_ENTRY(0xc5d), TBL_ENTRY(0xc5e), TBL_ENTRY(0xc5f),
- TBL_ENTRY(0xc60), TBL_ENTRY(0xc61), TBL_ENTRY(0xc62), TBL_ENTRY(0xc63),
- TBL_ENTRY(0xc64), TBL_ENTRY(0xc65), TBL_ENTRY(0xc66), TBL_ENTRY(0xc67),
- TBL_ENTRY(0xc68), TBL_ENTRY(0xc69), TBL_ENTRY(0xc6a), TBL_ENTRY(0xc6b),
- TBL_ENTRY(0xc6c), TBL_ENTRY(0xc6d), TBL_ENTRY(0xc6e), TBL_ENTRY(0xc6f),
- TBL_ENTRY(0xc70), TBL_ENTRY(0xc71), TBL_ENTRY(0xc72), TBL_ENTRY(0xc73),
- TBL_ENTRY(0xc74), TBL_ENTRY(0xc75), TBL_ENTRY(0xc76), TBL_ENTRY(0xc77),
- TBL_ENTRY(0xc78), TBL_ENTRY(0xc79), TBL_ENTRY(0xc7a), TBL_ENTRY(0xc7b),
- TBL_ENTRY(0xc7c), TBL_ENTRY(0xc7d), TBL_ENTRY(0xc7e), TBL_ENTRY(0xc7f),
- TBL_ENTRY(0xc80), TBL_ENTRY(0xc81), TBL_ENTRY(0xc82), TBL_ENTRY(0xc83),
- TBL_ENTRY(0xc84), TBL_ENTRY(0xc85), TBL_ENTRY(0xc86), TBL_ENTRY(0xc87),
- TBL_ENTRY(0xc88), TBL_ENTRY(0xc89), TBL_ENTRY(0xc8a), TBL_ENTRY(0xc8b),
- TBL_ENTRY(0xc8c), TBL_ENTRY(0xc8d), TBL_ENTRY(0xc8e), TBL_ENTRY(0xc8f),
- TBL_ENTRY(0xc90), TBL_ENTRY(0xc91), TBL_ENTRY(0xc92), TBL_ENTRY(0xc93),
- TBL_ENTRY(0xc94), TBL_ENTRY(0xc95), TBL_ENTRY(0xc96), TBL_ENTRY(0xc97),
- TBL_ENTRY(0xc98), TBL_ENTRY(0xc99), TBL_ENTRY(0xc9a), TBL_ENTRY(0xc9b),
- TBL_ENTRY(0xc9c), TBL_ENTRY(0xc9d), TBL_ENTRY(0xc9e), TBL_ENTRY(0xc9f),
- TBL_ENTRY(0xca0), TBL_ENTRY(0xca1), TBL_ENTRY(0xca2), TBL_ENTRY(0xca3),
- TBL_ENTRY(0xca4), TBL_ENTRY(0xca5), TBL_ENTRY(0xca6), TBL_ENTRY(0xca7),
- TBL_ENTRY(0xca8), TBL_ENTRY(0xca9), TBL_ENTRY(0xcaa), TBL_ENTRY(0xcab),
- TBL_ENTRY(0xcac), TBL_ENTRY(0xcad), TBL_ENTRY(0xcae), TBL_ENTRY(0xcaf),
- TBL_ENTRY(0xcb0), TBL_ENTRY(0xcb1), TBL_ENTRY(0xcb2), TBL_ENTRY(0xcb3),
- TBL_ENTRY(0xcb4), TBL_ENTRY(0xcb5), TBL_ENTRY(0xcb6), TBL_ENTRY(0xcb7),
- TBL_ENTRY(0xcb8), TBL_ENTRY(0xcb9), TBL_ENTRY(0xcba), TBL_ENTRY(0xcbb),
- TBL_ENTRY(0xcbc), TBL_ENTRY(0xcbd), TBL_ENTRY(0xcbe), TBL_ENTRY(0xcbf),
- TBL_ENTRY(0xcc0), TBL_ENTRY(0xcc1), TBL_ENTRY(0xcc2), TBL_ENTRY(0xcc3),
- TBL_ENTRY(0xcc4), TBL_ENTRY(0xcc5), TBL_ENTRY(0xcc6), TBL_ENTRY(0xcc7),
- TBL_ENTRY(0xcc8), TBL_ENTRY(0xcc9), TBL_ENTRY(0xcca), TBL_ENTRY(0xccb),
- TBL_ENTRY(0xccc), TBL_ENTRY(0xccd), TBL_ENTRY(0xcce), TBL_ENTRY(0xccf),
- TBL_ENTRY(0xcd0), TBL_ENTRY(0xcd1), TBL_ENTRY(0xcd2), TBL_ENTRY(0xcd3),
- TBL_ENTRY(0xcd4), TBL_ENTRY(0xcd5), TBL_ENTRY(0xcd6), TBL_ENTRY(0xcd7),
- TBL_ENTRY(0xcd8), TBL_ENTRY(0xcd9), TBL_ENTRY(0xcda), TBL_ENTRY(0xcdb),
- TBL_ENTRY(0xcdc), TBL_ENTRY(0xcdd), TBL_ENTRY(0xcde), TBL_ENTRY(0xcdf),
- TBL_ENTRY(0xce0), TBL_ENTRY(0xce1), TBL_ENTRY(0xce2), TBL_ENTRY(0xce3),
- TBL_ENTRY(0xce4), TBL_ENTRY(0xce5), TBL_ENTRY(0xce6), TBL_ENTRY(0xce7),
- TBL_ENTRY(0xce8), TBL_ENTRY(0xce9), TBL_ENTRY(0xcea), TBL_ENTRY(0xceb),
- TBL_ENTRY(0xcec), TBL_ENTRY(0xced), TBL_ENTRY(0xcee), TBL_ENTRY(0xcef),
- TBL_ENTRY(0xcf0), TBL_ENTRY(0xcf1), TBL_ENTRY(0xcf2), TBL_ENTRY(0xcf3),
- TBL_ENTRY(0xcf4), TBL_ENTRY(0xcf5), TBL_ENTRY(0xcf6), TBL_ENTRY(0xcf7),
- TBL_ENTRY(0xcf8), TBL_ENTRY(0xcf9), TBL_ENTRY(0xcfa), TBL_ENTRY(0xcfb),
- TBL_ENTRY(0xcfc), TBL_ENTRY(0xcfd), TBL_ENTRY(0xcfe), TBL_ENTRY(0xcff),
- TBL_ENTRY(0xd00), TBL_ENTRY(0xd01), TBL_ENTRY(0xd02), TBL_ENTRY(0xd03),
- TBL_ENTRY(0xd04), TBL_ENTRY(0xd05), TBL_ENTRY(0xd06), TBL_ENTRY(0xd07),
- TBL_ENTRY(0xd08), TBL_ENTRY(0xd09), TBL_ENTRY(0xd0a), TBL_ENTRY(0xd0b),
- TBL_ENTRY(0xd0c), TBL_ENTRY(0xd0d), TBL_ENTRY(0xd0e), TBL_ENTRY(0xd0f),
- TBL_ENTRY(0xd10), TBL_ENTRY(0xd11), TBL_ENTRY(0xd12), TBL_ENTRY(0xd13),
- TBL_ENTRY(0xd14), TBL_ENTRY(0xd15), TBL_ENTRY(0xd16), TBL_ENTRY(0xd17),
- TBL_ENTRY(0xd18), TBL_ENTRY(0xd19), TBL_ENTRY(0xd1a), TBL_ENTRY(0xd1b),
- TBL_ENTRY(0xd1c), TBL_ENTRY(0xd1d), TBL_ENTRY(0xd1e), TBL_ENTRY(0xd1f),
- TBL_ENTRY(0xd20), TBL_ENTRY(0xd21), TBL_ENTRY(0xd22), TBL_ENTRY(0xd23),
- TBL_ENTRY(0xd24), TBL_ENTRY(0xd25), TBL_ENTRY(0xd26), TBL_ENTRY(0xd27),
- TBL_ENTRY(0xd28), TBL_ENTRY(0xd29), TBL_ENTRY(0xd2a), TBL_ENTRY(0xd2b),
- TBL_ENTRY(0xd2c), TBL_ENTRY(0xd2d), TBL_ENTRY(0xd2e), TBL_ENTRY(0xd2f),
- TBL_ENTRY(0xd30), TBL_ENTRY(0xd31), TBL_ENTRY(0xd32), TBL_ENTRY(0xd33),
- TBL_ENTRY(0xd34), TBL_ENTRY(0xd35), TBL_ENTRY(0xd36), TBL_ENTRY(0xd37),
- TBL_ENTRY(0xd38), TBL_ENTRY(0xd39), TBL_ENTRY(0xd3a), TBL_ENTRY(0xd3b),
- TBL_ENTRY(0xd3c), TBL_ENTRY(0xd3d), TBL_ENTRY(0xd3e), TBL_ENTRY(0xd3f),
- TBL_ENTRY(0xd40), TBL_ENTRY(0xd41), TBL_ENTRY(0xd42), TBL_ENTRY(0xd43),
- TBL_ENTRY(0xd44), TBL_ENTRY(0xd45), TBL_ENTRY(0xd46), TBL_ENTRY(0xd47),
- TBL_ENTRY(0xd48), TBL_ENTRY(0xd49), TBL_ENTRY(0xd4a), TBL_ENTRY(0xd4b),
- TBL_ENTRY(0xd4c), TBL_ENTRY(0xd4d), TBL_ENTRY(0xd4e), TBL_ENTRY(0xd4f),
- TBL_ENTRY(0xd50), TBL_ENTRY(0xd51), TBL_ENTRY(0xd52), TBL_ENTRY(0xd53),
- TBL_ENTRY(0xd54), TBL_ENTRY(0xd55), TBL_ENTRY(0xd56), TBL_ENTRY(0xd57),
- TBL_ENTRY(0xd58), TBL_ENTRY(0xd59), TBL_ENTRY(0xd5a), TBL_ENTRY(0xd5b),
- TBL_ENTRY(0xd5c), TBL_ENTRY(0xd5d), TBL_ENTRY(0xd5e), TBL_ENTRY(0xd5f),
- TBL_ENTRY(0xd60), TBL_ENTRY(0xd61), TBL_ENTRY(0xd62), TBL_ENTRY(0xd63),
- TBL_ENTRY(0xd64), TBL_ENTRY(0xd65), TBL_ENTRY(0xd66), TBL_ENTRY(0xd67),
- TBL_ENTRY(0xd68), TBL_ENTRY(0xd69), TBL_ENTRY(0xd6a), TBL_ENTRY(0xd6b),
- TBL_ENTRY(0xd6c), TBL_ENTRY(0xd6d), TBL_ENTRY(0xd6e), TBL_ENTRY(0xd6f),
- TBL_ENTRY(0xd70), TBL_ENTRY(0xd71), TBL_ENTRY(0xd72), TBL_ENTRY(0xd73),
- TBL_ENTRY(0xd74), TBL_ENTRY(0xd75), TBL_ENTRY(0xd76), TBL_ENTRY(0xd77),
- TBL_ENTRY(0xd78), TBL_ENTRY(0xd79), TBL_ENTRY(0xd7a), TBL_ENTRY(0xd7b),
- TBL_ENTRY(0xd7c), TBL_ENTRY(0xd7d), TBL_ENTRY(0xd7e), TBL_ENTRY(0xd7f),
- TBL_ENTRY(0xd80), TBL_ENTRY(0xd81), TBL_ENTRY(0xd82), TBL_ENTRY(0xd83),
- TBL_ENTRY(0xd84), TBL_ENTRY(0xd85), TBL_ENTRY(0xd86), TBL_ENTRY(0xd87),
- TBL_ENTRY(0xd88), TBL_ENTRY(0xd89), TBL_ENTRY(0xd8a), TBL_ENTRY(0xd8b),
- TBL_ENTRY(0xd8c), TBL_ENTRY(0xd8d), TBL_ENTRY(0xd8e), TBL_ENTRY(0xd8f),
- TBL_ENTRY(0xd90), TBL_ENTRY(0xd91), TBL_ENTRY(0xd92), TBL_ENTRY(0xd93),
- TBL_ENTRY(0xd94), TBL_ENTRY(0xd95), TBL_ENTRY(0xd96), TBL_ENTRY(0xd97),
- TBL_ENTRY(0xd98), TBL_ENTRY(0xd99), TBL_ENTRY(0xd9a), TBL_ENTRY(0xd9b),
- TBL_ENTRY(0xd9c), TBL_ENTRY(0xd9d), TBL_ENTRY(0xd9e), TBL_ENTRY(0xd9f),
- TBL_ENTRY(0xda0), TBL_ENTRY(0xda1), TBL_ENTRY(0xda2), TBL_ENTRY(0xda3),
- TBL_ENTRY(0xda4), TBL_ENTRY(0xda5), TBL_ENTRY(0xda6), TBL_ENTRY(0xda7),
- TBL_ENTRY(0xda8), TBL_ENTRY(0xda9), TBL_ENTRY(0xdaa), TBL_ENTRY(0xdab),
- TBL_ENTRY(0xdac), TBL_ENTRY(0xdad), TBL_ENTRY(0xdae), TBL_ENTRY(0xdaf),
- TBL_ENTRY(0xdb0), TBL_ENTRY(0xdb1), TBL_ENTRY(0xdb2), TBL_ENTRY(0xdb3),
- TBL_ENTRY(0xdb4), TBL_ENTRY(0xdb5), TBL_ENTRY(0xdb6), TBL_ENTRY(0xdb7),
- TBL_ENTRY(0xdb8), TBL_ENTRY(0xdb9), TBL_ENTRY(0xdba), TBL_ENTRY(0xdbb),
- TBL_ENTRY(0xdbc), TBL_ENTRY(0xdbd), TBL_ENTRY(0xdbe), TBL_ENTRY(0xdbf),
- TBL_ENTRY(0xdc0), TBL_ENTRY(0xdc1), TBL_ENTRY(0xdc2), TBL_ENTRY(0xdc3),
- TBL_ENTRY(0xdc4), TBL_ENTRY(0xdc5), TBL_ENTRY(0xdc6), TBL_ENTRY(0xdc7),
- TBL_ENTRY(0xdc8), TBL_ENTRY(0xdc9), TBL_ENTRY(0xdca), TBL_ENTRY(0xdcb),
- TBL_ENTRY(0xdcc), TBL_ENTRY(0xdcd), TBL_ENTRY(0xdce), TBL_ENTRY(0xdcf),
- TBL_ENTRY(0xdd0), TBL_ENTRY(0xdd1), TBL_ENTRY(0xdd2), TBL_ENTRY(0xdd3),
- TBL_ENTRY(0xdd4), TBL_ENTRY(0xdd5), TBL_ENTRY(0xdd6), TBL_ENTRY(0xdd7),
- TBL_ENTRY(0xdd8), TBL_ENTRY(0xdd9), TBL_ENTRY(0xdda), TBL_ENTRY(0xddb),
- TBL_ENTRY(0xddc), TBL_ENTRY(0xddd), TBL_ENTRY(0xdde), TBL_ENTRY(0xddf),
- TBL_ENTRY(0xde0), TBL_ENTRY(0xde1), TBL_ENTRY(0xde2), TBL_ENTRY(0xde3),
- TBL_ENTRY(0xde4), TBL_ENTRY(0xde5), TBL_ENTRY(0xde6), TBL_ENTRY(0xde7),
- TBL_ENTRY(0xde8), TBL_ENTRY(0xde9), TBL_ENTRY(0xdea), TBL_ENTRY(0xdeb),
- TBL_ENTRY(0xdec), TBL_ENTRY(0xded), TBL_ENTRY(0xdee), TBL_ENTRY(0xdef),
- TBL_ENTRY(0xdf0), TBL_ENTRY(0xdf1), TBL_ENTRY(0xdf2), TBL_ENTRY(0xdf3),
- TBL_ENTRY(0xdf4), TBL_ENTRY(0xdf5), TBL_ENTRY(0xdf6), TBL_ENTRY(0xdf7),
- TBL_ENTRY(0xdf8), TBL_ENTRY(0xdf9), TBL_ENTRY(0xdfa), TBL_ENTRY(0xdfb),
- TBL_ENTRY(0xdfc), TBL_ENTRY(0xdfd), TBL_ENTRY(0xdfe), TBL_ENTRY(0xdff),
- TBL_ENTRY(0xe00), TBL_ENTRY(0xe01), TBL_ENTRY(0xe02), TBL_ENTRY(0xe03),
- TBL_ENTRY(0xe04), TBL_ENTRY(0xe05), TBL_ENTRY(0xe06), TBL_ENTRY(0xe07),
- TBL_ENTRY(0xe08), TBL_ENTRY(0xe09), TBL_ENTRY(0xe0a), TBL_ENTRY(0xe0b),
- TBL_ENTRY(0xe0c), TBL_ENTRY(0xe0d), TBL_ENTRY(0xe0e), TBL_ENTRY(0xe0f),
- TBL_ENTRY(0xe10), TBL_ENTRY(0xe11), TBL_ENTRY(0xe12), TBL_ENTRY(0xe13),
- TBL_ENTRY(0xe14), TBL_ENTRY(0xe15), TBL_ENTRY(0xe16), TBL_ENTRY(0xe17),
- TBL_ENTRY(0xe18), TBL_ENTRY(0xe19), TBL_ENTRY(0xe1a), TBL_ENTRY(0xe1b),
- TBL_ENTRY(0xe1c), TBL_ENTRY(0xe1d), TBL_ENTRY(0xe1e), TBL_ENTRY(0xe1f),
- TBL_ENTRY(0xe20), TBL_ENTRY(0xe21), TBL_ENTRY(0xe22), TBL_ENTRY(0xe23),
- TBL_ENTRY(0xe24), TBL_ENTRY(0xe25), TBL_ENTRY(0xe26), TBL_ENTRY(0xe27),
- TBL_ENTRY(0xe28), TBL_ENTRY(0xe29), TBL_ENTRY(0xe2a), TBL_ENTRY(0xe2b),
- TBL_ENTRY(0xe2c), TBL_ENTRY(0xe2d), TBL_ENTRY(0xe2e), TBL_ENTRY(0xe2f),
- TBL_ENTRY(0xe30), TBL_ENTRY(0xe31), TBL_ENTRY(0xe32), TBL_ENTRY(0xe33),
- TBL_ENTRY(0xe34), TBL_ENTRY(0xe35), TBL_ENTRY(0xe36), TBL_ENTRY(0xe37),
- TBL_ENTRY(0xe38), TBL_ENTRY(0xe39), TBL_ENTRY(0xe3a), TBL_ENTRY(0xe3b),
- TBL_ENTRY(0xe3c), TBL_ENTRY(0xe3d), TBL_ENTRY(0xe3e), TBL_ENTRY(0xe3f),
- TBL_ENTRY(0xe40), TBL_ENTRY(0xe41), TBL_ENTRY(0xe42), TBL_ENTRY(0xe43),
- TBL_ENTRY(0xe44), TBL_ENTRY(0xe45), TBL_ENTRY(0xe46), TBL_ENTRY(0xe47),
- TBL_ENTRY(0xe48), TBL_ENTRY(0xe49), TBL_ENTRY(0xe4a), TBL_ENTRY(0xe4b),
- TBL_ENTRY(0xe4c), TBL_ENTRY(0xe4d), TBL_ENTRY(0xe4e), TBL_ENTRY(0xe4f),
- TBL_ENTRY(0xe50), TBL_ENTRY(0xe51), TBL_ENTRY(0xe52), TBL_ENTRY(0xe53),
- TBL_ENTRY(0xe54), TBL_ENTRY(0xe55), TBL_ENTRY(0xe56), TBL_ENTRY(0xe57),
- TBL_ENTRY(0xe58), TBL_ENTRY(0xe59), TBL_ENTRY(0xe5a), TBL_ENTRY(0xe5b),
- TBL_ENTRY(0xe5c), TBL_ENTRY(0xe5d), TBL_ENTRY(0xe5e), TBL_ENTRY(0xe5f),
- TBL_ENTRY(0xe60), TBL_ENTRY(0xe61), TBL_ENTRY(0xe62), TBL_ENTRY(0xe63),
- TBL_ENTRY(0xe64), TBL_ENTRY(0xe65), TBL_ENTRY(0xe66), TBL_ENTRY(0xe67),
- TBL_ENTRY(0xe68), TBL_ENTRY(0xe69), TBL_ENTRY(0xe6a), TBL_ENTRY(0xe6b),
- TBL_ENTRY(0xe6c), TBL_ENTRY(0xe6d), TBL_ENTRY(0xe6e), TBL_ENTRY(0xe6f),
- TBL_ENTRY(0xe70), TBL_ENTRY(0xe71), TBL_ENTRY(0xe72), TBL_ENTRY(0xe73),
- TBL_ENTRY(0xe74), TBL_ENTRY(0xe75), TBL_ENTRY(0xe76), TBL_ENTRY(0xe77),
- TBL_ENTRY(0xe78), TBL_ENTRY(0xe79), TBL_ENTRY(0xe7a), TBL_ENTRY(0xe7b),
- TBL_ENTRY(0xe7c), TBL_ENTRY(0xe7d), TBL_ENTRY(0xe7e), TBL_ENTRY(0xe7f),
- TBL_ENTRY(0xe80), TBL_ENTRY(0xe81), TBL_ENTRY(0xe82), TBL_ENTRY(0xe83),
- TBL_ENTRY(0xe84), TBL_ENTRY(0xe85), TBL_ENTRY(0xe86), TBL_ENTRY(0xe87),
- TBL_ENTRY(0xe88), TBL_ENTRY(0xe89), TBL_ENTRY(0xe8a), TBL_ENTRY(0xe8b),
- TBL_ENTRY(0xe8c), TBL_ENTRY(0xe8d), TBL_ENTRY(0xe8e), TBL_ENTRY(0xe8f),
- TBL_ENTRY(0xe90), TBL_ENTRY(0xe91), TBL_ENTRY(0xe92), TBL_ENTRY(0xe93),
- TBL_ENTRY(0xe94), TBL_ENTRY(0xe95), TBL_ENTRY(0xe96), TBL_ENTRY(0xe97),
- TBL_ENTRY(0xe98), TBL_ENTRY(0xe99), TBL_ENTRY(0xe9a), TBL_ENTRY(0xe9b),
- TBL_ENTRY(0xe9c), TBL_ENTRY(0xe9d), TBL_ENTRY(0xe9e), TBL_ENTRY(0xe9f),
- TBL_ENTRY(0xea0), TBL_ENTRY(0xea1), TBL_ENTRY(0xea2), TBL_ENTRY(0xea3),
- TBL_ENTRY(0xea4), TBL_ENTRY(0xea5), TBL_ENTRY(0xea6), TBL_ENTRY(0xea7),
- TBL_ENTRY(0xea8), TBL_ENTRY(0xea9), TBL_ENTRY(0xeaa), TBL_ENTRY(0xeab),
- TBL_ENTRY(0xeac), TBL_ENTRY(0xead), TBL_ENTRY(0xeae), TBL_ENTRY(0xeaf),
- TBL_ENTRY(0xeb0), TBL_ENTRY(0xeb1), TBL_ENTRY(0xeb2), TBL_ENTRY(0xeb3),
- TBL_ENTRY(0xeb4), TBL_ENTRY(0xeb5), TBL_ENTRY(0xeb6), TBL_ENTRY(0xeb7),
- TBL_ENTRY(0xeb8), TBL_ENTRY(0xeb9), TBL_ENTRY(0xeba), TBL_ENTRY(0xebb),
- TBL_ENTRY(0xebc), TBL_ENTRY(0xebd), TBL_ENTRY(0xebe), TBL_ENTRY(0xebf),
- TBL_ENTRY(0xec0), TBL_ENTRY(0xec1), TBL_ENTRY(0xec2), TBL_ENTRY(0xec3),
- TBL_ENTRY(0xec4), TBL_ENTRY(0xec5), TBL_ENTRY(0xec6), TBL_ENTRY(0xec7),
- TBL_ENTRY(0xec8), TBL_ENTRY(0xec9), TBL_ENTRY(0xeca), TBL_ENTRY(0xecb),
- TBL_ENTRY(0xecc), TBL_ENTRY(0xecd), TBL_ENTRY(0xece), TBL_ENTRY(0xecf),
- TBL_ENTRY(0xed0), TBL_ENTRY(0xed1), TBL_ENTRY(0xed2), TBL_ENTRY(0xed3),
- TBL_ENTRY(0xed4), TBL_ENTRY(0xed5), TBL_ENTRY(0xed6), TBL_ENTRY(0xed7),
- TBL_ENTRY(0xed8), TBL_ENTRY(0xed9), TBL_ENTRY(0xeda), TBL_ENTRY(0xedb),
- TBL_ENTRY(0xedc), TBL_ENTRY(0xedd), TBL_ENTRY(0xede), TBL_ENTRY(0xedf),
- TBL_ENTRY(0xee0), TBL_ENTRY(0xee1), TBL_ENTRY(0xee2), TBL_ENTRY(0xee3),
- TBL_ENTRY(0xee4), TBL_ENTRY(0xee5), TBL_ENTRY(0xee6), TBL_ENTRY(0xee7),
- TBL_ENTRY(0xee8), TBL_ENTRY(0xee9), TBL_ENTRY(0xeea), TBL_ENTRY(0xeeb),
- TBL_ENTRY(0xeec), TBL_ENTRY(0xeed), TBL_ENTRY(0xeee), TBL_ENTRY(0xeef),
- TBL_ENTRY(0xef0), TBL_ENTRY(0xef1), TBL_ENTRY(0xef2), TBL_ENTRY(0xef3),
- TBL_ENTRY(0xef4), TBL_ENTRY(0xef5), TBL_ENTRY(0xef6), TBL_ENTRY(0xef7),
- TBL_ENTRY(0xef8), TBL_ENTRY(0xef9), TBL_ENTRY(0xefa), TBL_ENTRY(0xefb),
- TBL_ENTRY(0xefc), TBL_ENTRY(0xefd), TBL_ENTRY(0xefe), TBL_ENTRY(0xeff),
- TBL_ENTRY(0xf00), TBL_ENTRY(0xf01), TBL_ENTRY(0xf02), TBL_ENTRY(0xf03),
- TBL_ENTRY(0xf04), TBL_ENTRY(0xf05), TBL_ENTRY(0xf06), TBL_ENTRY(0xf07),
- TBL_ENTRY(0xf08), TBL_ENTRY(0xf09), TBL_ENTRY(0xf0a), TBL_ENTRY(0xf0b),
- TBL_ENTRY(0xf0c), TBL_ENTRY(0xf0d), TBL_ENTRY(0xf0e), TBL_ENTRY(0xf0f),
- TBL_ENTRY(0xf10), TBL_ENTRY(0xf11), TBL_ENTRY(0xf12), TBL_ENTRY(0xf13),
- TBL_ENTRY(0xf14), TBL_ENTRY(0xf15), TBL_ENTRY(0xf16), TBL_ENTRY(0xf17),
- TBL_ENTRY(0xf18), TBL_ENTRY(0xf19), TBL_ENTRY(0xf1a), TBL_ENTRY(0xf1b),
- TBL_ENTRY(0xf1c), TBL_ENTRY(0xf1d), TBL_ENTRY(0xf1e), TBL_ENTRY(0xf1f),
- TBL_ENTRY(0xf20), TBL_ENTRY(0xf21), TBL_ENTRY(0xf22), TBL_ENTRY(0xf23),
- TBL_ENTRY(0xf24), TBL_ENTRY(0xf25), TBL_ENTRY(0xf26), TBL_ENTRY(0xf27),
- TBL_ENTRY(0xf28), TBL_ENTRY(0xf29), TBL_ENTRY(0xf2a), TBL_ENTRY(0xf2b),
- TBL_ENTRY(0xf2c), TBL_ENTRY(0xf2d), TBL_ENTRY(0xf2e), TBL_ENTRY(0xf2f),
- TBL_ENTRY(0xf30), TBL_ENTRY(0xf31), TBL_ENTRY(0xf32), TBL_ENTRY(0xf33),
- TBL_ENTRY(0xf34), TBL_ENTRY(0xf35), TBL_ENTRY(0xf36), TBL_ENTRY(0xf37),
- TBL_ENTRY(0xf38), TBL_ENTRY(0xf39), TBL_ENTRY(0xf3a), TBL_ENTRY(0xf3b),
- TBL_ENTRY(0xf3c), TBL_ENTRY(0xf3d), TBL_ENTRY(0xf3e), TBL_ENTRY(0xf3f),
- TBL_ENTRY(0xf40), TBL_ENTRY(0xf41), TBL_ENTRY(0xf42), TBL_ENTRY(0xf43),
- TBL_ENTRY(0xf44), TBL_ENTRY(0xf45), TBL_ENTRY(0xf46), TBL_ENTRY(0xf47),
- TBL_ENTRY(0xf48), TBL_ENTRY(0xf49), TBL_ENTRY(0xf4a), TBL_ENTRY(0xf4b),
- TBL_ENTRY(0xf4c), TBL_ENTRY(0xf4d), TBL_ENTRY(0xf4e), TBL_ENTRY(0xf4f),
- TBL_ENTRY(0xf50), TBL_ENTRY(0xf51), TBL_ENTRY(0xf52), TBL_ENTRY(0xf53),
- TBL_ENTRY(0xf54), TBL_ENTRY(0xf55), TBL_ENTRY(0xf56), TBL_ENTRY(0xf57),
- TBL_ENTRY(0xf58), TBL_ENTRY(0xf59), TBL_ENTRY(0xf5a), TBL_ENTRY(0xf5b),
- TBL_ENTRY(0xf5c), TBL_ENTRY(0xf5d), TBL_ENTRY(0xf5e), TBL_ENTRY(0xf5f),
- TBL_ENTRY(0xf60), TBL_ENTRY(0xf61), TBL_ENTRY(0xf62), TBL_ENTRY(0xf63),
- TBL_ENTRY(0xf64), TBL_ENTRY(0xf65), TBL_ENTRY(0xf66), TBL_ENTRY(0xf67),
- TBL_ENTRY(0xf68), TBL_ENTRY(0xf69), TBL_ENTRY(0xf6a), TBL_ENTRY(0xf6b),
- TBL_ENTRY(0xf6c), TBL_ENTRY(0xf6d), TBL_ENTRY(0xf6e), TBL_ENTRY(0xf6f),
- TBL_ENTRY(0xf70), TBL_ENTRY(0xf71), TBL_ENTRY(0xf72), TBL_ENTRY(0xf73),
- TBL_ENTRY(0xf74), TBL_ENTRY(0xf75), TBL_ENTRY(0xf76), TBL_ENTRY(0xf77),
- TBL_ENTRY(0xf78), TBL_ENTRY(0xf79), TBL_ENTRY(0xf7a), TBL_ENTRY(0xf7b),
- TBL_ENTRY(0xf7c), TBL_ENTRY(0xf7d), TBL_ENTRY(0xf7e), TBL_ENTRY(0xf7f),
- TBL_ENTRY(0xf80), TBL_ENTRY(0xf81), TBL_ENTRY(0xf82), TBL_ENTRY(0xf83),
- TBL_ENTRY(0xf84), TBL_ENTRY(0xf85), TBL_ENTRY(0xf86), TBL_ENTRY(0xf87),
- TBL_ENTRY(0xf88), TBL_ENTRY(0xf89), TBL_ENTRY(0xf8a), TBL_ENTRY(0xf8b),
- TBL_ENTRY(0xf8c), TBL_ENTRY(0xf8d), TBL_ENTRY(0xf8e), TBL_ENTRY(0xf8f),
- TBL_ENTRY(0xf90), TBL_ENTRY(0xf91), TBL_ENTRY(0xf92), TBL_ENTRY(0xf93),
- TBL_ENTRY(0xf94), TBL_ENTRY(0xf95), TBL_ENTRY(0xf96), TBL_ENTRY(0xf97),
- TBL_ENTRY(0xf98), TBL_ENTRY(0xf99), TBL_ENTRY(0xf9a), TBL_ENTRY(0xf9b),
- TBL_ENTRY(0xf9c), TBL_ENTRY(0xf9d), TBL_ENTRY(0xf9e), TBL_ENTRY(0xf9f),
- TBL_ENTRY(0xfa0), TBL_ENTRY(0xfa1), TBL_ENTRY(0xfa2), TBL_ENTRY(0xfa3),
- TBL_ENTRY(0xfa4), TBL_ENTRY(0xfa5), TBL_ENTRY(0xfa6), TBL_ENTRY(0xfa7),
- TBL_ENTRY(0xfa8), TBL_ENTRY(0xfa9), TBL_ENTRY(0xfaa), TBL_ENTRY(0xfab),
- TBL_ENTRY(0xfac), TBL_ENTRY(0xfad), TBL_ENTRY(0xfae), TBL_ENTRY(0xfaf),
- TBL_ENTRY(0xfb0), TBL_ENTRY(0xfb1), TBL_ENTRY(0xfb2), TBL_ENTRY(0xfb3),
- TBL_ENTRY(0xfb4), TBL_ENTRY(0xfb5), TBL_ENTRY(0xfb6), TBL_ENTRY(0xfb7),
- TBL_ENTRY(0xfb8), TBL_ENTRY(0xfb9), TBL_ENTRY(0xfba), TBL_ENTRY(0xfbb),
- TBL_ENTRY(0xfbc), TBL_ENTRY(0xfbd), TBL_ENTRY(0xfbe), TBL_ENTRY(0xfbf),
- TBL_ENTRY(0xfc0), TBL_ENTRY(0xfc1), TBL_ENTRY(0xfc2), TBL_ENTRY(0xfc3),
- TBL_ENTRY(0xfc4), TBL_ENTRY(0xfc5), TBL_ENTRY(0xfc6), TBL_ENTRY(0xfc7),
- TBL_ENTRY(0xfc8), TBL_ENTRY(0xfc9), TBL_ENTRY(0xfca), TBL_ENTRY(0xfcb),
- TBL_ENTRY(0xfcc), TBL_ENTRY(0xfcd), TBL_ENTRY(0xfce), TBL_ENTRY(0xfcf),
- TBL_ENTRY(0xfd0), TBL_ENTRY(0xfd1), TBL_ENTRY(0xfd2), TBL_ENTRY(0xfd3),
- TBL_ENTRY(0xfd4), TBL_ENTRY(0xfd5), TBL_ENTRY(0xfd6), TBL_ENTRY(0xfd7),
- TBL_ENTRY(0xfd8), TBL_ENTRY(0xfd9), TBL_ENTRY(0xfda), TBL_ENTRY(0xfdb),
- TBL_ENTRY(0xfdc), TBL_ENTRY(0xfdd), TBL_ENTRY(0xfde), TBL_ENTRY(0xfdf),
- TBL_ENTRY(0xfe0), TBL_ENTRY(0xfe1), TBL_ENTRY(0xfe2), TBL_ENTRY(0xfe3),
- TBL_ENTRY(0xfe4), TBL_ENTRY(0xfe5), TBL_ENTRY(0xfe6), TBL_ENTRY(0xfe7),
- TBL_ENTRY(0xfe8), TBL_ENTRY(0xfe9), TBL_ENTRY(0xfea), TBL_ENTRY(0xfeb),
- TBL_ENTRY(0xfec), TBL_ENTRY(0xfed), TBL_ENTRY(0xfee), TBL_ENTRY(0xfef),
- TBL_ENTRY(0xff0), TBL_ENTRY(0xff1), TBL_ENTRY(0xff2), TBL_ENTRY(0xff3),
- TBL_ENTRY(0xff4), TBL_ENTRY(0xff5), TBL_ENTRY(0xff6), TBL_ENTRY(0xff7),
- TBL_ENTRY(0xff8), TBL_ENTRY(0xff9), TBL_ENTRY(0xffa), TBL_ENTRY(0xffb),
- TBL_ENTRY(0xffc), TBL_ENTRY(0xffd), TBL_ENTRY(0xffe), TBL_ENTRY(0xfff),
-};
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
index 0752906..72f4663 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
@@ -2,11 +2,13 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
+obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o clkrst_init.o \
+ pll_spectrum.o umc_init.o ddrphy_init.o
+else
+obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o
obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
+endif
+
obj-y += boot-mode.o
-obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
-obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \
- clkrst_init.o
-obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
-obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c
index 68b9d5f..b83582f 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/pll_init.c
@@ -11,7 +11,7 @@
#undef DPLL_SSC_RATE_1PER
-void dpll_init(void)
+static void dpll_init(void)
{
u32 tmp;
@@ -42,7 +42,7 @@ void dpll_init(void)
writel(tmp, SC_DPLLCTRL2);
}
-void upll_init(void)
+static void upll_init(void)
{
u32 tmp, clk_mode_upll, clk_mode_axosel;
@@ -82,7 +82,7 @@ void upll_init(void)
writel(tmp, SC_UPLLCTRL);
}
-void vpll_init(void)
+static void vpll_init(void)
{
u32 tmp, clk_mode_axosel;
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c
index b4dd799..2cc5df6 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/sg_init.c
@@ -21,7 +21,7 @@ void sg_init(void)
#endif
writel(tmp, SG_MEMCONF);
- /* Input ports must be enabled deasserting reset of cores */
+ /* Input ports must be enabled before deasserting reset of cores */
tmp = readl(SG_IECTRL);
tmp |= 0x1;
writel(tmp, SG_IECTRL);
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c
index 8788916..bbc3dcb 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c
@@ -9,7 +9,7 @@
#include <asm/arch/umc-regs.h>
#include <asm/arch/ddrphy-regs.h>
-static inline void umc_start_ssif(void __iomem *ssif_base)
+static void umc_start_ssif(void __iomem *ssif_base)
{
writel(0x00000000, ssif_base + 0x0000b004);
writel(0xffffffff, ssif_base + 0x0000c004);
@@ -43,8 +43,8 @@ static inline void umc_start_ssif(void __iomem *ssif_base)
writel(0x00000001, ssif_base + UMC_DMDRST);
}
-void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
- int size, int freq)
+static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
+ int size, int freq)
{
if (freq == 1333) {
writel(0x45990b11, dramcont + UMC_CMDCTLA);
@@ -119,7 +119,7 @@ void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
writel(0x00000520, dramcont + UMC_DFICUPDCTLA);
}
-static inline int umc_init_sub(int freq, int size_ch0, int size_ch1)
+static int umc_init_sub(int freq, int size_ch0, int size_ch1)
{
void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE;
void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0);
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
index 8206e2a..e330fda 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
@@ -2,10 +2,13 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
+obj-y += sbc_init.o sg_init.o pll_init.o clkrst_init.o \
+ pll_spectrum.o umc_init.o ddrphy_init.o
+else
+obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o
obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
+endif
+
obj-y += boot-mode.o
-obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
-obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o
-obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
-obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_info.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_info.c
deleted file mode 100644
index 325a4f6..0000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_info.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/board.h>
-
-int checkboard(void)
-{
- puts("Board: PH1-Pro4 Board\n");
-
- return check_support_card();
-}
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c
index 33bccff..c31b74b 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/boot-mode.c
@@ -45,17 +45,17 @@ struct boot_device_info boot_device_table[] = {
{BOOT_DEVICE_NONE, "Reserved"},
{BOOT_DEVICE_NONE, "Reserved"},
{BOOT_DEVICE_NONE, "Reserved"},
- {BOOT_DEVICE_NONE, ""}
+ { /* sentinel */ }
};
-u32 get_boot_mode_sel(void)
+int get_boot_mode_sel(void)
{
return (readl(SG_PINMON0) >> 1) & 0x1f;
}
u32 spl_boot_device(void)
{
- u32 boot_mode;
+ int boot_mode;
if (boot_is_swapped())
return BOOT_DEVICE_NOR;
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c
index 2dcc089..1db90f8 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c
@@ -11,7 +11,7 @@
#undef DPLL_SSC_RATE_1PER
-void dpll_init(void)
+static void dpll_init(void)
{
u32 tmp;
@@ -46,7 +46,7 @@ void dpll_init(void)
writel(tmp, SC_DPLLCTRL2);
}
-void stop_mpll(void)
+static void stop_mpll(void)
{
u32 tmp;
@@ -62,7 +62,7 @@ void stop_mpll(void)
;
}
-void vpll_init(void)
+static void vpll_init(void)
{
u32 tmp, clk_mode_axosel;
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c
index b4dd799..b7c4b10 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sg_init.c
@@ -21,8 +21,8 @@ void sg_init(void)
#endif
writel(tmp, SG_MEMCONF);
- /* Input ports must be enabled deasserting reset of cores */
+ /* Input ports must be enabled before deasserting reset of cores */
tmp = readl(SG_IECTRL);
- tmp |= 0x1;
+ tmp |= 1 << 6;
writel(tmp, SG_IECTRL);
}
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c
index 1973ab0..2d1bde6 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c
@@ -9,7 +9,7 @@
#include <asm/arch/umc-regs.h>
#include <asm/arch/ddrphy-regs.h>
-static inline void umc_start_ssif(void __iomem *ssif_base)
+static void umc_start_ssif(void __iomem *ssif_base)
{
writel(0x00000001, ssif_base + 0x0000b004);
writel(0xffffffff, ssif_base + 0x0000c004);
@@ -52,8 +52,8 @@ static inline void umc_start_ssif(void __iomem *ssif_base)
writel(0x00000001, ssif_base + UMC_DMDRST);
}
-void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
- int size, int freq)
+static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
+ int size, int freq)
{
writel(0x66bb0f17, dramcont + UMC_CMDCTLA);
writel(0x18c6aa44, dramcont + UMC_CMDCTLB);
@@ -88,7 +88,7 @@ void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
writel(0x80000020, dramcont + UMC_DFICUPDCTLA);
}
-static inline int umc_init_sub(int freq, int size_ch0, int size_ch1)
+static int umc_init_sub(int freq, int size_ch0, int size_ch1)
{
void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE;
void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0);
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
index 0752906..72f4663 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
@@ -2,11 +2,13 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
+obj-y += bcu_init.o sbc_init.o sg_init.o pll_init.o clkrst_init.o \
+ pll_spectrum.o umc_init.o ddrphy_init.o
+else
+obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o
obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
+endif
+
obj-y += boot-mode.o
-obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
-obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \
- clkrst_init.o
-obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
-obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/board_info.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/board_info.c
deleted file mode 100644
index 15dc289..0000000
--- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/board_info.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/board.h>
-
-int checkboard(void)
-{
- puts("Board: PH1-sLD8 Board\n");
-
- return check_support_card();
-}
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c
index 2b6403f..5e80335 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pinctrl.c
@@ -26,6 +26,15 @@ void pin_init(void)
sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */
#endif
+#ifdef CONFIG_SYS_I2C_UNIPHIER
+ {
+ u32 tmp;
+ tmp = readl(SG_IECTRL);
+ tmp |= 0xc00; /* enable SCL0, SDA0, SCL1, SDA1 */
+ writel(tmp, SG_IECTRL);
+ }
+#endif
+
#ifdef CONFIG_NAND_DENALI
sg_set_pinsel(15, 0); /* XNFRE_GB -> XNFRE_GB */
sg_set_pinsel(16, 0); /* XNFWE_GB -> XNFWE_GB */
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c
index 4d87053..4b82700 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/pll_init.c
@@ -9,7 +9,7 @@
#include <asm/arch/sc-regs.h>
#include <asm/arch/sg-regs.h>
-void dpll_init(void)
+static void dpll_init(void)
{
u32 tmp;
/*
@@ -54,7 +54,7 @@ void dpll_init(void)
writel(tmp, SC_DPLLCTRL2);
}
-void upll_init(void)
+static void upll_init(void)
{
u32 tmp, clk_mode_upll, clk_mode_axosel;
@@ -94,7 +94,7 @@ void upll_init(void)
writel(tmp, SC_UPLLCTRL);
}
-void vpll_init(void)
+static void vpll_init(void)
{
u32 tmp, clk_mode_axosel;
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c
index 2e0f9ae..2fbc73a 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c
@@ -9,7 +9,7 @@
#include <asm/arch/umc-regs.h>
#include <asm/arch/ddrphy-regs.h>
-static inline void umc_start_ssif(void __iomem *ssif_base)
+static void umc_start_ssif(void __iomem *ssif_base)
{
writel(0x00000000, ssif_base + 0x0000b004);
writel(0xffffffff, ssif_base + 0x0000c004);
@@ -43,8 +43,8 @@ static inline void umc_start_ssif(void __iomem *ssif_base)
writel(0x00000001, ssif_base + UMC_DMDRST);
}
-void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
- int size, int freq)
+static void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
+ int size, int freq)
{
#ifdef CONFIG_DDR_STANDARD
writel(0x55990b11, dramcont + UMC_CMDCTLA);
@@ -99,7 +99,7 @@ void umc_dramcont_init(void __iomem *dramcont, void __iomem *ca_base,
writel(0x00000520, dramcont + UMC_DFICUPDCTLA);
}
-static inline int umc_init_sub(int freq, int size_ch0, int size_ch1)
+static int umc_init_sub(int freq, int size_ch0, int size_ch1)
{
void __iomem *ssif_base = (void __iomem *)UMC_SSIF_BASE;
void __iomem *ca_base0 = (void __iomem *)UMC_CA_BASE(0);
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/board_info.c b/arch/arm/cpu/armv7/uniphier/print_misc_info.c
index 27d772e..69cfab5 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/board_info.c
+++ b/arch/arm/cpu/armv7/uniphier/print_misc_info.c
@@ -1,16 +1,13 @@
/*
- * Copyright (C) 2012-2014 Panasonic Corporation
+ * Copyright (C) 2015 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <common.h>
#include <asm/arch/board.h>
-int checkboard(void)
+int misc_init_f(void)
{
- puts("Board: PH1-LD4 Board\n");
-
return check_support_card();
}
diff --git a/arch/arm/cpu/armv7/uniphier/spl.c b/arch/arm/cpu/armv7/uniphier/spl.c
index 40d28ad..8a4eafc 100644
--- a/arch/arm/cpu/armv7/uniphier/spl.c
+++ b/arch/arm/cpu/armv7/uniphier/spl.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2013-2014 Panasonic Corporation
+ * Copyright (C) 2013-2015 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
*
* SPDX-License-Identifier: GPL-2.0+
@@ -7,11 +7,53 @@
#include <common.h>
#include <spl.h>
+#include <linux/compiler.h>
+#include <asm/arch/led.h>
+#include <asm/arch/board.h>
+
+void __weak bcu_init(void)
+{
+};
+void sbc_init(void);
+void sg_init(void);
+void pll_init(void);
+void pin_init(void);
+void clkrst_init(void);
+int umc_init(void);
+void enable_dpll_ssc(void);
void spl_board_init(void)
{
-#if defined(CONFIG_BOARD_POSTCLK_INIT)
- board_postclk_init();
-#endif
- dram_init();
+ bcu_init();
+
+ sbc_init();
+
+ sg_init();
+
+ uniphier_board_reset();
+
+ pll_init();
+
+ uniphier_board_init();
+
+ led_write(L, 0, , );
+
+ clkrst_init();
+
+ led_write(L, 1, , );
+
+ {
+ int res;
+
+ res = umc_init();
+ if (res < 0) {
+ while (1)
+ ;
+ }
+ }
+ led_write(L, 2, , );
+
+ enable_dpll_ssc();
+
+ led_write(L, 3, , );
}
diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c
index 651ca40..b69fd37 100644
--- a/arch/arm/cpu/armv7/virt-v7.c
+++ b/arch/arm/cpu/armv7/virt-v7.c
@@ -15,8 +15,6 @@
#include <asm/io.h>
#include <asm/secure.h>
-unsigned long gic_dist_addr;
-
static unsigned int read_id_pfr1(void)
{
unsigned int reg;
@@ -68,6 +66,12 @@ static void kick_secondary_cpus_gic(unsigned long gicdaddr)
void __weak smp_kick_all_cpus(void)
{
+ unsigned long gic_dist_addr;
+
+ gic_dist_addr = get_gicd_base_address();
+ if (gic_dist_addr == -1)
+ return;
+
kick_secondary_cpus_gic(gic_dist_addr);
}
@@ -75,6 +79,7 @@ int armv7_init_nonsec(void)
{
unsigned int reg;
unsigned itlinesnr, i;
+ unsigned long gic_dist_addr;
/* check whether the CPU supports the security extensions */
reg = read_id_pfr1();
diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile
index 3363a3c..901f2ce 100644
--- a/arch/arm/cpu/armv7/zynq/Makefile
+++ b/arch/arm/cpu/armv7/zynq/Makefile
@@ -13,4 +13,5 @@ obj-y += cpu.o
obj-y += ddrc.o
obj-y += slcr.o
obj-y += clk.o
+obj-y += lowlevel_init.o
obj-$(CONFIG_SPL_BUILD) += spl.o
diff --git a/arch/arm/cpu/armv7/zynq/config.mk b/arch/arm/cpu/armv7/zynq/config.mk
new file mode 100644
index 0000000..778a377
--- /dev/null
+++ b/arch/arm/cpu/armv7/zynq/config.mk
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2013 - 2015 Xilinx, Inc. All rights reserved.
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+# Allow NEON instructions (needed for lowlevel_init.S with GNU toolchain)
+PLATFORM_RELFLAGS += -mfpu=neon
diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c
index 816d0c5..914b1fe 100644
--- a/arch/arm/cpu/armv7/zynq/cpu.c
+++ b/arch/arm/cpu/armv7/zynq/cpu.c
@@ -10,10 +10,6 @@
#include <asm/arch/sys_proto.h>
#include <asm/arch/hardware.h>
-void lowlevel_init(void)
-{
-}
-
#define ZYNQ_SILICON_VER_MASK 0xF0000000
#define ZYNQ_SILICON_VER_SHIFT 28
diff --git a/arch/arm/cpu/armv7/zynq/ddrc.c b/arch/arm/cpu/armv7/zynq/ddrc.c
index d74f8db..5b20acc 100644
--- a/arch/arm/cpu/armv7/zynq/ddrc.c
+++ b/arch/arm/cpu/armv7/zynq/ddrc.c
@@ -42,6 +42,8 @@ void zynq_ddrc_init(void)
*/
/* cppcheck-suppress nullPointer */
memset((void *)0, 0, 1 * 1024 * 1024);
+
+ gd->ram_size /= 2;
} else {
puts("ECC disabled ");
}
diff --git a/arch/arm/cpu/armv7/zynq/lowlevel_init.S b/arch/arm/cpu/armv7/zynq/lowlevel_init.S
new file mode 100644
index 0000000..6d714b7
--- /dev/null
+++ b/arch/arm/cpu/armv7/zynq/lowlevel_init.S
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2013 Xilinx, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+
+ /* Enable the the VFP */
+ mrc p15, 0, r1, c1, c0, 2
+ orr r1, r1, #(0x3 << 20)
+ orr r1, r1, #(0x3 << 20)
+ mcr p15, 0, r1, c1, c0, 2
+ isb
+ fmrx r1, FPEXC
+ orr r1,r1, #(1<<30)
+ fmxr FPEXC, r1
+
+ /* Move back to caller */
+ mov pc, lr
+
+ENDPROC(lowlevel_init)
diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
index 934ccc3..2521589 100644
--- a/arch/arm/cpu/armv7/zynq/slcr.c
+++ b/arch/arm/cpu/armv7/zynq/slcr.c
@@ -132,7 +132,7 @@ void zynq_slcr_devcfg_disable(void)
zynq_slcr_unlock();
/* Disable AXI interface by asserting FPGA resets */
- writel(0xFFFFFFFF, &slcr_base->fpga_rst_ctrl);
+ writel(0xF, &slcr_base->fpga_rst_ctrl);
/* Set Level Shifters DT618760 */
writel(0xA, &slcr_base->lvl_shftr_en);
diff --git a/arch/arm/cpu/armv7/zynq/spl.c b/arch/arm/cpu/armv7/zynq/spl.c
index 31627f9..b80c357 100644
--- a/arch/arm/cpu/armv7/zynq/spl.c
+++ b/arch/arm/cpu/armv7/zynq/spl.c
@@ -20,9 +20,6 @@ void board_init_f(ulong dummy)
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
- /* Set global data pointer. */
- gd = &gdata;
-
preloader_console_init();
arch_cpu_init();
board_init_r(NULL, 0);
@@ -46,12 +43,21 @@ u32 spl_boot_device(void)
mode = BOOT_DEVICE_SPI;
break;
#endif
+ case ZYNQ_BM_NAND:
+ mode = BOOT_DEVICE_NAND;
+ break;
+ case ZYNQ_BM_NOR:
+ mode = BOOT_DEVICE_NOR;
+ break;
#ifdef CONFIG_SPL_MMC_SUPPORT
case ZYNQ_BM_SD:
puts("mmc boot\n");
mode = BOOT_DEVICE_MMC1;
break;
#endif
+ case ZYNQ_BM_JTAG:
+ mode = BOOT_DEVICE_RAM;
+ break;
default:
puts("Unsupported boot mode selected\n");
hang();
diff --git a/arch/arm/cpu/at91-common/Makefile b/arch/arm/cpu/at91-common/Makefile
index 89e1577..03614d4 100644
--- a/arch/arm/cpu/at91-common/Makefile
+++ b/arch/arm/cpu/at91-common/Makefile
@@ -13,5 +13,6 @@ ifneq ($(CONFIG_SPL_BUILD),)
obj-$(CONFIG_AT91SAM9G20) += sdram.o spl_at91.o
obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o spl_at91.o
obj-$(CONFIG_SAMA5D3) += mpddrc.o spl_atmel.o
+obj-$(CONFIG_SAMA5D4) += mpddrc.o spl_atmel.o
obj-y += spl.o
endif
diff --git a/arch/arm/cpu/at91-common/mpddrc.c b/arch/arm/cpu/at91-common/mpddrc.c
index 44798e6..beec13d 100644
--- a/arch/arm/cpu/at91-common/mpddrc.c
+++ b/arch/arm/cpu/at91-common/mpddrc.c
@@ -19,7 +19,7 @@ static inline void atmel_mpddr_op(int mode, u32 ram_address)
static int ddr2_decodtype_is_seq(u32 cr)
{
-#if defined(CONFIG_SAMA5D3)
+#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4)
if (cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED)
return 0;
#endif
diff --git a/arch/arm/cpu/at91-common/spl.c b/arch/arm/cpu/at91-common/spl.c
index 6473320..aaa5eec 100644
--- a/arch/arm/cpu/at91-common/spl.c
+++ b/arch/arm/cpu/at91-common/spl.c
@@ -12,12 +12,16 @@
#include <asm/arch/clk.h>
#include <spl.h>
+#if defined(CONFIG_AT91SAM9_WATCHDOG)
+void at91_disable_wdt(void) { }
+#else
void at91_disable_wdt(void)
{
struct at91_wdt *wdt = (struct at91_wdt *)ATMEL_BASE_WDT;
writel(AT91_WDT_MR_WDDIS, &wdt->mr);
}
+#endif
u32 spl_boot_device(void)
{
diff --git a/arch/arm/cpu/at91-common/spl_atmel.c b/arch/arm/cpu/at91-common/spl_atmel.c
index 7297530..9cc1111 100644
--- a/arch/arm/cpu/at91-common/spl_atmel.c
+++ b/arch/arm/cpu/at91-common/spl_atmel.c
@@ -51,11 +51,23 @@ static void switch_to_main_crystal_osc(void)
while (!(readl(&pmc->mcfr) & AT91_PMC_MAINRDY))
;
+#ifndef CONFIG_SAMA5D4
tmp = readl(&pmc->mor);
tmp &= ~AT91_PMC_MOR_MOSCRCEN;
tmp &= ~AT91_PMC_MOR_KEY(0xff);
tmp |= AT91_PMC_MOR_KEY(0x37);
writel(tmp, &pmc->mor);
+#endif
+}
+
+__weak void matrix_init(void)
+{
+ /* This only be used for sama5d4 soc now */
+}
+
+__weak void redirect_int_from_saic_to_aic(void)
+{
+ /* This only be used for sama5d4 soc now */
}
void s_init(void)
@@ -70,6 +82,10 @@ void s_init(void)
at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
+ matrix_init();
+
+ redirect_int_from_saic_to_aic();
+
timer_init();
board_early_init_f();
diff --git a/arch/arm/cpu/tegra20-common/pmu.c b/arch/arm/cpu/tegra20-common/pmu.c
index 36a76a2..a774246 100644
--- a/arch/arm/cpu/tegra20-common/pmu.c
+++ b/arch/arm/cpu/tegra20-common/pmu.c
@@ -52,7 +52,7 @@ int pmu_set_nominal(void)
debug("%s: Cannot find DVC I2C bus\n", __func__);
return ret;
}
- ret = i2c_get_chip(bus, PMI_I2C_ADDRESS, &dev);
+ ret = i2c_get_chip(bus, PMI_I2C_ADDRESS, 1, &dev);
if (ret) {
debug("%s: Cannot find DVC I2C chip\n", __func__);
return ret;
diff --git a/arch/arm/dts/exynos4.dtsi b/arch/arm/dts/exynos4.dtsi
index 77fad48..7de227c 100644
--- a/arch/arm/dts/exynos4.dtsi
+++ b/arch/arm/dts/exynos4.dtsi
@@ -51,56 +51,64 @@
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
- interrupts = <0 0 0>;
+ reg = <0x13860000 0x100>;
+ interrupts = <0 56 0>;
};
i2c@13870000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
- interrupts = <1 1 0>;
+ reg = <0x13870000 0x100>;
+ interrupts = <1 57 0>;
};
i2c@13880000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
- interrupts = <2 2 0>;
+ reg = <0x13880000 0x100>;
+ interrupts = <2 58 0>;
};
i2c@13890000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
- interrupts = <3 3 0>;
+ reg = <0x13890000 0x100>;
+ interrupts = <3 59 0>;
};
i2c@138a0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
- interrupts = <4 4 0>;
+ reg = <0x138a0000 0x100>;
+ interrupts = <4 60 0>;
};
i2c@138b0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
- interrupts = <5 5 0>;
+ reg = <0x138b0000 0x100>;
+ interrupts = <5 61 0>;
};
i2c@138c0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
- interrupts = <6 6 0>;
+ reg = <0x138c0000 0x100>;
+ interrupts = <6 62 0>;
};
i2c@138d0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
- interrupts = <7 7 0>;
+ reg = <0x138d0000 0x100>;
+ interrupts = <7 63 0>;
};
sdhci@12510000 {
@@ -143,11 +151,4 @@
interrupts = <0 131 0>;
};
- gpio: gpio {
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
};
diff --git a/arch/arm/dts/exynos4210-origen.dts b/arch/arm/dts/exynos4210-origen.dts
index dd2476c..3f87761 100644
--- a/arch/arm/dts/exynos4210-origen.dts
+++ b/arch/arm/dts/exynos4210-origen.dts
@@ -36,7 +36,7 @@
sdhci@12530000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
- cd-gpios = <&gpio 0xA2 0>;
+ cd-gpios = <&gpk2 2 0>;
};
sdhci@12540000 {
diff --git a/arch/arm/dts/exynos4210-trats.dts b/arch/arm/dts/exynos4210-trats.dts
index 8c7a2c3..36d02df 100644
--- a/arch/arm/dts/exynos4210-trats.dts
+++ b/arch/arm/dts/exynos4210-trats.dts
@@ -101,7 +101,7 @@
sdhci@12510000 {
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
- pwr-gpios = <&gpio 146 0>;
+ pwr-gpios = <&gpk0 2 0>;
};
sdhci@12520000 {
@@ -111,7 +111,7 @@
sdhci@12530000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
- cd-gpios = <&gpio 284 0>;
+ cd-gpios = <&gpx3 4 0>;
};
sdhci@12540000 {
diff --git a/arch/arm/dts/exynos4210-universal_c210.dts b/arch/arm/dts/exynos4210-universal_c210.dts
index 808c3f7..16948c9 100644
--- a/arch/arm/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/dts/exynos4210-universal_c210.dts
@@ -24,7 +24,7 @@
sdhci@12510000 {
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
- pwr-gpios = <&gpio 146 0>;
+ pwr-gpios = <&gpk0 2 0>;
};
sdhci@12520000 {
@@ -34,7 +34,7 @@
sdhci@12530000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
- cd-gpios = <&gpio 284 0>;
+ cd-gpios = <&gpx3 4 0>;
};
sdhci@12540000 {
@@ -43,10 +43,10 @@
soft-spi {
compatible = "u-boot,soft-spi";
- cs-gpio = <&gpio 235 0>; /* Y43 */
- sclk-gpio = <&gpio 225 0>; /* Y31 */
- mosi-gpio = <&gpio 227 0>; /* Y33 */
- miso-gpio = <&gpio 224 0>; /* Y30 */
+ cs-gpio = <&gpy4 3 0>;
+ sclk-gpio = <&gpy3 1 0>;
+ mosi-gpio = <&gpy3 3 0>;
+ miso-gpio = <&gpy3 0 0>;
spi-delay-us = <1>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts
index c78efec..00a2917 100644
--- a/arch/arm/dts/exynos4412-odroid.dts
+++ b/arch/arm/dts/exynos4412-odroid.dts
@@ -16,6 +16,13 @@
aliases {
i2c0 = "/i2c@13860000";
+ i2c1 = "/i2c@13870000";
+ i2c2 = "/i2c@13880000";
+ i2c3 = "/i2c@13890000";
+ i2c4 = "/i2c@138a0000";
+ i2c5 = "/i2c@138b0000";
+ i2c6 = "/i2c@138c0000";
+ i2c7 = "/i2c@138d0000";
serial0 = "/serial@13800000";
console = "/serial@13810000";
mmc2 = "sdhci@12530000";
@@ -51,7 +58,7 @@
sdhci@12530000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
- cd-gpios = <&gpio 122 0>;
+ cd-gpios = <&gpk2 2 0>;
};
sdhci@12540000 {
diff --git a/arch/arm/dts/exynos4412-trats2.dts b/arch/arm/dts/exynos4412-trats2.dts
index 60e4515..dd238df 100644
--- a/arch/arm/dts/exynos4412-trats2.dts
+++ b/arch/arm/dts/exynos4412-trats2.dts
@@ -416,7 +416,7 @@
sdhci@12510000 {
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
- pwr-gpios = <&gpio 0x6a 0>;
+ pwr-gpios = <&gpk0 4 0>;
status = "disabled";
};
@@ -427,7 +427,7 @@
sdhci@12530000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
- cd-gpios = <&gpio 0x7a 0>;
+ cd-gpios = <&gpk2 2 0>;
};
sdhci@12540000 {
@@ -437,7 +437,7 @@
dwmmc@12550000 {
samsung,bus-width = <8>;
samsung,timing = <2 1 0>;
- pwr-gpios = <&gpio 0x6a 0>;
+ pwr-gpios = <&gpk0 4 0>;
fifoth_val = <0x203f0040>;
bus_hz = <400000000>;
div = <0x3>;
diff --git a/arch/arm/dts/exynos5.dtsi b/arch/arm/dts/exynos5.dtsi
index e539068..238acb8 100644
--- a/arch/arm/dts/exynos5.dtsi
+++ b/arch/arm/dts/exynos5.dtsi
@@ -6,6 +6,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "samsung,exynos5";
@@ -247,7 +248,4 @@
u-boot,dm-pre-reloc;
id = <3>;
};
-
- gpio: gpio {
- };
};
diff --git a/arch/arm/dts/exynos5250-arndale.dts b/arch/arm/dts/exynos5250-arndale.dts
index 202f2ea..21c0a21 100644
--- a/arch/arm/dts/exynos5250-arndale.dts
+++ b/arch/arm/dts/exynos5250-arndale.dts
@@ -15,6 +15,14 @@
compatible = "samsung,arndale", "samsung,exynos5250";
aliases {
+ i2c0 = "/i2c@12c60000";
+ i2c1 = "/i2c@12c70000";
+ i2c2 = "/i2c@12c80000";
+ i2c3 = "/i2c@12c90000";
+ i2c4 = "/i2c@12ca0000";
+ i2c5 = "/i2c@12cb0000";
+ i2c6 = "/i2c@12cc0000";
+ i2c7 = "/i2c@12cd0000";
serial0 = "/serial@12C20000";
console = "/serial@12C20000";
};
diff --git a/arch/arm/dts/exynos5250-smdk5250.dts b/arch/arm/dts/exynos5250-smdk5250.dts
index 8850409..9273562 100644
--- a/arch/arm/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/dts/exynos5250-smdk5250.dts
@@ -146,6 +146,6 @@
};
ehci@12110000 {
- samsung,vbus-gpio = <&gpio 0x316 0>; /* X26 */
+ samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
index bac5015..7d8be69 100644
--- a/arch/arm/dts/exynos5250-snow.dts
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -44,7 +44,8 @@
reg = <0x1e>;
compatible = "google,cros-ec";
i2c-max-frequency = <100000>;
- ec-interrupt = <&gpio 182 1>;
+ u-boot,i2c-offset-len = <0>;
+ ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
};
power-regulator@48 {
@@ -68,7 +69,7 @@
reg = <0>;
compatible = "google,cros-ec";
spi-max-frequency = <5000000>;
- ec-interrupt = <&gpio 182 1>;
+ ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
optimise-flash-write;
status = "disabled";
};
@@ -76,7 +77,7 @@
sound@3830000 {
samsung,codec-type = "max98095";
- codec-enable-gpio = <&gpio 0xb7 0>;
+ codec-enable-gpio = <&gpx1 7 GPIO_ACTIVE_HIGH>;
};
sound@12d60000 {
@@ -131,11 +132,11 @@
};
ehci@12110000 {
- samsung,vbus-gpio = <&gpio 0xb1 0>; /* X11 */
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
};
xhci@12000000 {
- samsung,vbus-gpio = <&gpio 0xbf 0>; /* X27 */
+ samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
};
tmu@10060000 {
diff --git a/arch/arm/dts/exynos5420-peach-pit.dts b/arch/arm/dts/exynos5420-peach-pit.dts
index d1d8735..b801de9 100644
--- a/arch/arm/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/dts/exynos5420-peach-pit.dts
@@ -17,7 +17,7 @@
"google,peach", "samsung,exynos5420", "samsung,exynos5";
config {
- google,bad-wake-gpios = <&gpio 0x56 0>; /* gpx0-6 */
+ google,bad-wake-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
hwid = "PIT TEST A-A 7848";
lazy-init = <1>;
};
@@ -108,7 +108,7 @@
spi-half-duplex;
spi-max-timeout-ms = <1100>;
spi-frame-header = <0xec>;
- ec-interrupt = <&gpio 93 1>; /* GPX1_5 */
+ ec-interrupt = <&gpx1 5 GPIO_ACTIVE_LOW>;
/*
* This describes the flash memory within the EC. Note
@@ -124,11 +124,11 @@
};
xhci@12000000 {
- samsung,vbus-gpio = <&gpio 0x40 0>; /* H00 */
+ samsung,vbus-gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
};
xhci@12400000 {
- samsung,vbus-gpio = <&gpio 0x41 0>; /* H01 */
+ samsung,vbus-gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
};
fimd@14400000 {
diff --git a/arch/arm/dts/exynos5422-odroidxu3.dts b/arch/arm/dts/exynos5422-odroidxu3.dts
index 79a7acd..8f46637 100644
--- a/arch/arm/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/dts/exynos5422-odroidxu3.dts
@@ -32,7 +32,7 @@
};
ehci@12110000 {
- samsung,vbus-gpio = <&gpio 0x66 0>; /* X26 */
+ samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
};
serial@12C20000 {
diff --git a/arch/arm/dts/exynos5800-peach-pi.dts b/arch/arm/dts/exynos5800-peach-pi.dts
index e7c380f..e4bc100 100644
--- a/arch/arm/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/dts/exynos5800-peach-pi.dts
@@ -17,7 +17,7 @@
"google,peach", "samsung,exynos5800", "samsung,exynos5";
config {
- google,bad-wake-gpios = <&gpio 0x56 0>; /* gpx0-6 */
+ google,bad-wake-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
hwid = "PIT TEST A-A 7848";
lazy-init = <1>;
};
@@ -32,7 +32,7 @@
mem-manuf = "samsung";
mem-type = "ddr3";
clock-frequency = <800000000>;
- arm-frequency = <1700000000>;
+ arm-frequency = <900000000>;
};
tmu@10060000 {
@@ -102,7 +102,7 @@
spi-half-duplex;
spi-max-timeout-ms = <1100>;
spi-frame-header = <0xec>;
- ec-interrupt = <&gpio 93 1>; /* GPX1_5 */
+ ec-interrupt = <&gpx1 5 GPIO_ACTIVE_LOW>;
/*
* This describes the flash memory within the EC. Note
@@ -118,11 +118,11 @@
};
xhci@12000000 {
- samsung,vbus-gpio = <&gpio 0x40 0>; /* H00 */
+ samsung,vbus-gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
};
xhci@12400000 {
- samsung,vbus-gpio = <&gpio 0x41 0>; /* H01 */
+ samsung,vbus-gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
};
fimd@14400000 {
diff --git a/arch/arm/dts/tegra114-dalmore.dts b/arch/arm/dts/tegra114-dalmore.dts
index 81ad212..51ff266 100644
--- a/arch/arm/dts/tegra114-dalmore.dts
+++ b/arch/arm/dts/tegra114-dalmore.dts
@@ -57,7 +57,7 @@
};
sdhci@78000400 {
- cd-gpios = <&gpio 170 1>; /* gpio PV2 */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
bus-width = <4>;
status = "okay";
};
@@ -68,8 +68,7 @@
};
usb@7d008000 {
- /* SPDIF_IN: USB_VBUS_EN1 */
- nvidia,vbus-gpio = <&gpio 86 0>;
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
diff --git a/arch/arm/dts/tegra124-jetson-tk1.dts b/arch/arm/dts/tegra124-jetson-tk1.dts
index 51fef54..e7b66d8 100644
--- a/arch/arm/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/dts/tegra124-jetson-tk1.dts
@@ -303,8 +303,9 @@
sdhci@700b0400 {
status = "okay";
- cd-gpios = <&gpio 170 1>; /* gpio PV2 */
- power-gpios = <&gpio 136 0>; /* gpio PR0 */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
@@ -316,12 +317,12 @@
usb@7d000000 {
status = "okay";
dr_mode = "otg";
- nvidia,vbus-gpio = <&gpio 108 0>; /* gpio PN4, USB_VBUS_EN0 */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
};
usb@7d008000 {
status = "okay";
- nvidia,vbus-gpio = <&gpio 109 0>; /* gpio PN5, USB_VBUS_EN1 */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
};
regulators {
diff --git a/arch/arm/dts/tegra124-venice2.dts b/arch/arm/dts/tegra124-venice2.dts
index f7ccfc5..9e93cf9 100644
--- a/arch/arm/dts/tegra124-venice2.dts
+++ b/arch/arm/dts/tegra124-venice2.dts
@@ -72,8 +72,9 @@
sdhci@700b0400 {
status = "okay";
- cd-gpios = <&gpio 170 0>; /* gpio PV2 */
- power-gpios = <&gpio 136 0>; /* gpio PR0 */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
bus-width = <4>;
};
@@ -85,11 +86,11 @@
usb@7d000000 {
status = "okay";
dr_mode = "otg";
- nvidia,vbus-gpio = <&gpio 108 0>; /* gpio PN4, USB_VBUS_EN0 */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
};
usb@7d008000 {
status = "okay";
- nvidia,vbus-gpio = <&gpio 109 0>; /* gpio PN5, USB_VBUS_EN1 */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/dts/tegra20-colibri_t20_iris.dts b/arch/arm/dts/tegra20-colibri_t20_iris.dts
index 7cf08f4..3131b92 100644
--- a/arch/arm/dts/tegra20-colibri_t20_iris.dts
+++ b/arch/arm/dts/tegra20-colibri_t20_iris.dts
@@ -22,16 +22,16 @@
};
usb@c5004000 {
- nvidia,phy-reset-gpio = <&gpio 169 0>; /* PV1 */
- nvidia,vbus-gpio = <&gpio 217 0>; /* PBB1 */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
};
usb@c5008000 {
- nvidia,vbus-gpio = <&gpio 178 1>; /* PW2 low-active */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
};
nand-controller@70008000 {
- nvidia,wp-gpios = <&gpio 144 0>; /* PS0 */
+ nvidia,wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
nvidia,width = <8>;
nvidia,timing = <15 100 25 80 25 10 15 10 100>;
@@ -43,7 +43,7 @@
sdhci@c8000600 {
status = "okay";
- cd-gpios = <&gpio 23 1>; /* gpio PC7 */
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
bus-width = <4>;
};
};
diff --git a/arch/arm/dts/tegra20-harmony.dts b/arch/arm/dts/tegra20-harmony.dts
index 982a14c..e6e4229 100644
--- a/arch/arm/dts/tegra20-harmony.dts
+++ b/arch/arm/dts/tegra20-harmony.dts
@@ -37,7 +37,7 @@
};
nand-controller@70008000 {
- nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */
+ nvidia,wp-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
nvidia,width = <8>;
nvidia,timing = <26 100 20 80 20 10 12 10 70>;
nand@0 {
@@ -67,22 +67,22 @@
};
usb@c5004000 {
- nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
+ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) 0>;
};
sdhci@c8000200 {
status = "okay";
- cd-gpios = <&gpio 69 1>; /* gpio PI5 */
- wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
sdhci@c8000600 {
status = "okay";
- cd-gpios = <&gpio 58 1>; /* gpio PH2 */
- wp-gpios = <&gpio 59 0>; /* gpio PH3 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
bus-width = <8>;
};
@@ -100,10 +100,14 @@
vsyncx-active-high;
nvidia,bits-per-pixel = <16>;
nvidia,pwm = <&pwm 0 0>;
- nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */
- nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
- nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
- nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */
+ nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(B, 5)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(B, 2)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,panel-vdd-gpios = <&gpio TEGRA_GPIO(C, 6)
+ GPIO_ACTIVE_HIGH>;
nvidia,panel-timings = <0 0 200 0 0>;
};
};
diff --git a/arch/arm/dts/tegra20-medcom-wide.dts b/arch/arm/dts/tegra20-medcom-wide.dts
index be2ed42..b6b57ab 100644
--- a/arch/arm/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/dts/tegra20-medcom-wide.dts
@@ -73,9 +73,12 @@
nvidia,bits-per-pixel = <16>;
nvidia,pwm = <&pwm 0 500000>;
- nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */
- nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
- nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
+ nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(B, 5)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(B, 2)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0)
+ GPIO_ACTIVE_HIGH>;
nvidia,panel-timings = <0 0 0 0>;
};
};
diff --git a/arch/arm/dts/tegra20-paz00.dts b/arch/arm/dts/tegra20-paz00.dts
index 9d735b5..16381c3 100644
--- a/arch/arm/dts/tegra20-paz00.dts
+++ b/arch/arm/dts/tegra20-paz00.dts
@@ -61,9 +61,9 @@
sdhci@c8000000 {
status = "okay";
- cd-gpios = <&gpio 173 1>; /* gpio PV5 */
- wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 169 0>; /* gpio PV1 */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
@@ -86,10 +86,14 @@
hsync-active-high;
nvidia,bits-per-pixel = <16>;
nvidia,pwm = <&pwm 0 0>;
- nvidia,backlight-enable-gpios = <&gpio 164 0>; /* PU4 */
- nvidia,lvds-shutdown-gpios = <&gpio 102 0>; /* PM6 */
- nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
- nvidia,panel-vdd-gpios = <&gpio 4 0>; /* PA4 */
+ nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(U, 4)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(M, 6)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,panel-vdd-gpios = <&gpio TEGRA_GPIO(A, 4)
+ GPIO_ACTIVE_HIGH>;
nvidia,panel-timings = <400 4 203 17 15>;
};
};
diff --git a/arch/arm/dts/tegra20-seaboard.dts b/arch/arm/dts/tegra20-seaboard.dts
index 43b9911..10f3992 100644
--- a/arch/arm/dts/tegra20-seaboard.dts
+++ b/arch/arm/dts/tegra20-seaboard.dts
@@ -65,7 +65,7 @@
};
nand-controller@70008000 {
- nvidia,wp-gpios = <&gpio 59 0>; /* PH3 */
+ nvidia,wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
nvidia,width = <8>;
nvidia,timing = <26 100 20 80 20 10 12 10 70>;
nand@0 {
@@ -151,7 +151,7 @@
};
usb@c5000000 {
- nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
dr_mode = "otg";
};
@@ -161,9 +161,9 @@
sdhci@c8000400 {
status = "okay";
- cd-gpios = <&gpio 69 1>; /* gpio PI5 */
- wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
@@ -186,10 +186,14 @@
hsync-active-high;
nvidia,bits-per-pixel = <16>;
nvidia,pwm = <&pwm 2 0>;
- nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */
- nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
- nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
- nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */
+ nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(D, 4)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(B, 2)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,panel-vdd-gpios = <&gpio TEGRA_GPIO(C, 6)
+ GPIO_ACTIVE_HIGH>;
nvidia,panel-timings = <400 4 203 17 15>;
};
};
diff --git a/arch/arm/dts/tegra20-tamonten.dtsi b/arch/arm/dts/tegra20-tamonten.dtsi
index f379622..78449e6 100644
--- a/arch/arm/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/dts/tegra20-tamonten.dtsi
@@ -14,7 +14,8 @@
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
- nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+ GPIO_ACTIVE_HIGH>;
};
};
@@ -280,7 +281,7 @@
};
nand-controller@70008000 {
- nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */
+ nvidia,wp-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
nvidia,width = <8>;
nvidia,timing = <26 100 20 80 20 10 12 10 70>;
@@ -476,8 +477,8 @@
};
sdhci@c8000600 {
- cd-gpios = <&gpio 58 1>; /* gpio PH2 */
- wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+ cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
status = "okay";
};
diff --git a/arch/arm/dts/tegra20-tec.dts b/arch/arm/dts/tegra20-tec.dts
index e99bd44..94ba6dc 100644
--- a/arch/arm/dts/tegra20-tec.dts
+++ b/arch/arm/dts/tegra20-tec.dts
@@ -73,9 +73,12 @@
nvidia,bits-per-pixel = <16>;
nvidia,pwm = <&pwm 0 500000>;
- nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */
- nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
- nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
+ nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(B, 5)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(B, 2)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0)
+ GPIO_ACTIVE_HIGH>;
nvidia,panel-timings = <0 0 0 0>;
};
};
diff --git a/arch/arm/dts/tegra20-trimslice.dts b/arch/arm/dts/tegra20-trimslice.dts
index 1637cbd..27b118f 100644
--- a/arch/arm/dts/tegra20-trimslice.dts
+++ b/arch/arm/dts/tegra20-trimslice.dts
@@ -62,7 +62,7 @@
};
usb@c5000000 {
- nvidia,vbus-gpio = <&gpio 170 0>; /* PV2 */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
};
usb@c5004000 {
@@ -76,8 +76,8 @@
sdhci@c8000600 {
status = "okay";
- cd-gpios = <&gpio 121 1>; /* gpio PP1 */
- wp-gpios = <&gpio 122 0>; /* gpio PP2 */
+ cd-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
@@ -111,7 +111,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
+ gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
regulator-always-on;
regulator-boot-on;
};
diff --git a/arch/arm/dts/tegra20-ventana.dts b/arch/arm/dts/tegra20-ventana.dts
index 6812203..939e567 100644
--- a/arch/arm/dts/tegra20-ventana.dts
+++ b/arch/arm/dts/tegra20-ventana.dts
@@ -61,9 +61,9 @@
sdhci@c8000400 {
status = "okay";
- cd-gpios = <&gpio 69 1>; /* gpio PI5 */
- wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
@@ -86,10 +86,14 @@
vsync-active-high;
nvidia,bits-per-pixel = <16>;
nvidia,pwm = <&pwm 2 0>;
- nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */
- nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
- nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
- nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */
+ nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(D, 4)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(B, 2)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0)
+ GPIO_ACTIVE_HIGH>;
+ nvidia,panel-vdd-gpios = <&gpio TEGRA_GPIO(C, 6)
+ GPIO_ACTIVE_HIGH>;
nvidia,panel-timings = <0 0 200 0 0>;
};
};
diff --git a/arch/arm/dts/tegra20-whistler.dts b/arch/arm/dts/tegra20-whistler.dts
index 4fd2496..c4a28eb 100644
--- a/arch/arm/dts/tegra20-whistler.dts
+++ b/arch/arm/dts/tegra20-whistler.dts
@@ -66,7 +66,7 @@
sdhci@c8000400 {
status = "okay";
- wp-gpios = <&gpio 173 0>; /* gpio PV5 */
+ wp-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
bus-width = <8>;
};
diff --git a/arch/arm/dts/tegra30-apalis.dts b/arch/arm/dts/tegra30-apalis.dts
index 5bad3e7..15db0f2 100644
--- a/arch/arm/dts/tegra30-apalis.dts
+++ b/arch/arm/dts/tegra30-apalis.dts
@@ -243,13 +243,13 @@
sdhci@78000000 {
status = "okay";
bus-width = <4>;
- cd-gpios = <&gpio 229 1>; /* PCC5, SD1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
};
sdhci@78000400 {
status = "okay";
bus-width = <8>;
- cd-gpios = <&gpio 171 1>; /* PV3, MMC1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
};
sdhci@78000600 {
@@ -262,20 +262,20 @@
usb@7d000000 {
status = "okay";
dr_mode = "peripheral";
- nvidia,vbus-gpio = <&gpio 157 0>; /* PT5, USBO1_EN */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
};
/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
usb@7d004000 {
status = "okay";
- nvidia,vbus-gpio = <&gpio 233 0>; /* PDD1, USBH_EN */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
phy_type = "utmi";
};
/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
usb@7d008000 {
status = "okay";
- nvidia,vbus-gpio = <&gpio 233 0>; /* PDD1, USBH_EN */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
};
regulators {
diff --git a/arch/arm/dts/tegra30-beaver.dts b/arch/arm/dts/tegra30-beaver.dts
index 5903af6..ae83636 100644
--- a/arch/arm/dts/tegra30-beaver.dts
+++ b/arch/arm/dts/tegra30-beaver.dts
@@ -196,9 +196,9 @@
sdhci@78000000 {
status = "okay";
- cd-gpios = <&gpio 69 1>; /* gpio PI5 */
- wp-gpios = <&gpio 155 0>; /* gpio PT3 */
- power-gpios = <&gpio 31 0>; /* gpio PD7 */
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
@@ -210,11 +210,11 @@
usb@7d000000 {
status = "okay";
dr_mode = "otg";
- nvidia,vbus-gpio = <&gpio 238 0>; /* gpio DD6, PEX_L1_CLKREQ */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
};
usb@7d008000 {
- nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/dts/tegra30-cardhu.dts b/arch/arm/dts/tegra30-cardhu.dts
index e13d0fb..23ca141 100644
--- a/arch/arm/dts/tegra30-cardhu.dts
+++ b/arch/arm/dts/tegra30-cardhu.dts
@@ -185,9 +185,9 @@
sdhci@78000000 {
status = "okay";
- cd-gpios = <&gpio 69 1>; /* gpio PI5 */
- wp-gpios = <&gpio 155 0>; /* gpio PT3 */
- power-gpios = <&gpio 31 0>; /* gpio PD7 */
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+ power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
@@ -197,7 +197,7 @@
};
usb@7d008000 {
- nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
status = "okay";
};
diff --git a/arch/arm/dts/tegra30-colibri.dts b/arch/arm/dts/tegra30-colibri.dts
index 37b6abd..6cd1902 100644
--- a/arch/arm/dts/tegra30-colibri.dts
+++ b/arch/arm/dts/tegra30-colibri.dts
@@ -64,7 +64,7 @@
sdhci@78000200 {
status = "okay";
bus-width = <4>;
- cd-gpios = <&gpio 23 1>; /* PC7, MMCD */
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
};
sdhci@78000600 {
@@ -83,12 +83,12 @@
usb@7d004000 {
status = "okay";
phy_type = "utmi";
- nvidia,vbus-gpio = <&gpio 234 0>; /* PDD2, VBUS_LAN */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
};
/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
usb@7d008000 {
status = "okay";
- nvidia,vbus-gpio = <&gpio 178 1>; /* PW2, USBH_PEN */
+ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
};
};
diff --git a/arch/arm/dts/tegra30-tamonten.dtsi b/arch/arm/dts/tegra30-tamonten.dtsi
index c73afef..8eff627 100644
--- a/arch/arm/dts/tegra30-tamonten.dtsi
+++ b/arch/arm/dts/tegra30-tamonten.dtsi
@@ -55,8 +55,8 @@
/* SD slot on the base board */
sdhci@78000400 {
- cd-gpios = <&gpio 69 1>; /* gpio PI5 */
- wp-gpios = <&gpio 67 0>; /* gpio PI3 */
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
diff --git a/arch/arm/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/dts/uniphier-ph1-ld4-ref.dts
index 6855878..d479be1 100644
--- a/arch/arm/dts/uniphier-ph1-ld4-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-ld4-ref.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Source for UniPhier PH1-LD4 Reference Board
*
- * Copyright (C) 2014 Panasonic Corporation
+ * Copyright (C) 2014-2015 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
*
* SPDX-License-Identifier: GPL-2.0+
@@ -9,6 +9,7 @@
/dts-v1/;
/include/ "uniphier-ph1-ld4.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
/ {
model = "Panasonic UniPhier PH1-LD4 Reference Board";
@@ -46,10 +47,6 @@
&i2c0 {
status = "okay";
- eeprom {
- compatible = "i2c-eeprom";
- reg = <0x50>;
- };
};
&usb0 {
diff --git a/arch/arm/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/dts/uniphier-ph1-pro4-ref.dts
index 1227b62..d9e7a8c 100644
--- a/arch/arm/dts/uniphier-ph1-pro4-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-pro4-ref.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Source for UniPhier PH1-Pro4 Reference Board
*
- * Copyright (C) 2014 Panasonic Corporation
+ * Copyright (C) 2014-2015 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
*
* SPDX-License-Identifier: GPL-2.0+
@@ -9,6 +9,7 @@
/dts-v1/;
/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
/ {
model = "Panasonic UniPhier PH1-Pro4 Reference Board";
@@ -48,10 +49,6 @@
&i2c0 {
status = "okay";
- eeprom {
- compatible = "i2c-eeprom";
- reg = <0x50>;
- };
};
&usb0 {
diff --git a/arch/arm/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/dts/uniphier-ph1-sld3-ref.dts
index fefc592..8a7f90a 100644
--- a/arch/arm/dts/uniphier-ph1-sld3-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-sld3-ref.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Source for UniPhier PH1-sLD3 Reference Board
*
- * Copyright (C) 2014 Panasonic Corporation
+ * Copyright (C) 2014-2015 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
*
* SPDX-License-Identifier: GPL-2.0+
@@ -9,6 +9,7 @@
/dts-v1/;
/include/ "uniphier-ph1-sld3.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
/ {
model = "Panasonic UniPhier PH1-sLD3 Reference Board";
@@ -45,10 +46,6 @@
&i2c0 {
status = "okay";
- eeprom {
- compatible = "i2c-eeprom";
- reg = <0x50>;
- };
};
&usb0 {
diff --git a/arch/arm/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/dts/uniphier-ph1-sld8-ref.dts
index 9b6d95c..0cb9c47 100644
--- a/arch/arm/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-sld8-ref.dts
@@ -1,7 +1,7 @@
/*
* Device Tree Source for UniPhier PH1-sLD8 Reference Board
*
- * Copyright (C) 2014 Panasonic Corporation
+ * Copyright (C) 2014-2015 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
*
* SPDX-License-Identifier: GPL-2.0+
@@ -9,6 +9,7 @@
/dts-v1/;
/include/ "uniphier-ph1-sld8.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
/ {
model = "Panasonic UniPhier PH1-sLD8 Reference Board";
@@ -46,10 +47,6 @@
&i2c0 {
status = "okay";
- eeprom {
- compatible = "i2c-eeprom";
- reg = <0x50>;
- };
};
&usb0 {
diff --git a/arch/arm/dts/uniphier-ref-daughter.dtsi b/arch/arm/dts/uniphier-ref-daughter.dtsi
new file mode 100644
index 0000000..0145b51
--- /dev/null
+++ b/arch/arm/dts/uniphier-ref-daughter.dtsi
@@ -0,0 +1,16 @@
+/*
+ * Device Tree Source for UniPhier Reference Daughter Board
+ *
+ * Copyright (C) 2014-2015 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+&i2c0 {
+ eeprom {
+ compatible = "i2c-eeprom";
+ reg = <0x50>;
+ u-boot,i2c-offset-len = <2>;
+ };
+};
diff --git a/arch/arm/include/asm/arch-armada-xp/config.h b/arch/arm/include/asm/arch-armada-xp/config.h
index 00ee775..f9fd424 100644
--- a/arch/arm/include/asm/arch-armada-xp/config.h
+++ b/arch/arm/include/asm/arch-armada-xp/config.h
@@ -31,7 +31,11 @@
#endif /* CONFIG_SYS_KWD_CONFIG */
/* Add target to build it automatically upon "make" */
+#ifdef CONFIG_SPL
+#define CONFIG_BUILD_TARGET "u-boot-spl.kwb"
+#else
#define CONFIG_BUILD_TARGET "u-boot.kwb"
+#endif
/* end of 16M scrubbed by training in bootrom */
#define CONFIG_SYS_INIT_SP_ADDR 0x00FF0000
diff --git a/arch/arm/include/asm/arch-armada-xp/cpu.h b/arch/arm/include/asm/arch-armada-xp/cpu.h
index 6b60c21..4f5ff96 100644
--- a/arch/arm/include/asm/arch-armada-xp/cpu.h
+++ b/arch/arm/include/asm/arch-armada-xp/cpu.h
@@ -96,6 +96,9 @@ struct kwgpio_registers {
u32 irq_level;
};
+/* Needed for dynamic (board-specific) mbus configuration */
+extern struct mvebu_mbus_state mbus_state;
+
/*
* functions
*/
@@ -103,5 +106,18 @@ unsigned int mvebu_sdram_bar(enum memory_bank bank);
unsigned int mvebu_sdram_bs(enum memory_bank bank);
void mvebu_sdram_size_adjust(enum memory_bank bank);
int mvebu_mbus_probe(struct mbus_win windows[], int count);
+
+/*
+ * Highspeed SERDES PHY config init, ported from bin_hdr
+ * to mainline U-Boot
+ */
+int serdes_phy_config(void);
+
+/*
+ * DDR3 init / training code ported from Marvell bin_hdr. Now
+ * available in mainline U-Boot in:
+ * drivers/ddr/mvebu/
+ */
+int ddr3_init(void);
#endif /* __ASSEMBLY__ */
#endif /* _ARMADA_XP_CPU_H */
diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h
index 912e55c..efcd74e 100644
--- a/arch/arm/include/asm/arch-at91/at91_common.h
+++ b/arch/arm/include/asm/arch-at91/at91_common.h
@@ -33,5 +33,6 @@ void at91_mck_init(u32 mckr);
void at91_spl_board_init(void);
void at91_disable_wdt(void);
void matrix_init(void);
+void redirect_int_from_saic_to_aic(void);
#endif /* AT91_COMMON_H */
diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h
index 53b5b2e..65691ab 100644
--- a/arch/arm/include/asm/arch-at91/at91_pmc.h
+++ b/arch/arm/include/asm/arch-at91/at91_pmc.h
@@ -157,10 +157,8 @@ typedef struct at91_pmc {
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
-#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
@@ -175,7 +173,7 @@ typedef struct at91_pmc {
#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
-#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */
+#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x] */
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
@@ -210,7 +208,7 @@ typedef struct at91_pmc {
#define AT91RM9200_PMC_MDIV_2 (1 << 8)
#define AT91RM9200_PMC_MDIV_3 (2 << 8)
#define AT91RM9200_PMC_MDIV_4 (3 << 8)
-#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
+#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */
#define AT91SAM9_PMC_MDIV_2 (1 << 8)
#define AT91SAM9_PMC_MDIV_4 (2 << 8)
#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */
@@ -230,8 +228,7 @@ typedef struct at91_pmc {
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
-#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */
-#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */
+#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
diff --git a/arch/arm/include/asm/arch-at91/at91_rstc.h b/arch/arm/include/asm/arch-at91/at91_rstc.h
index a942342..e4eb3da 100644
--- a/arch/arm/include/asm/arch-at91/at91_rstc.h
+++ b/arch/arm/include/asm/arch-at91/at91_rstc.h
@@ -13,6 +13,8 @@
#ifndef AT91_RSTC_H
#define AT91_RSTC_H
+/* Reset Controller Status Register */
+#define AT91_ASM_RSTC_SR (ATMEL_BASE_RSTC + 0x04)
#define AT91_ASM_RSTC_MR (ATMEL_BASE_RSTC + 0x08)
#ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/arch-at91/at91cap9.h b/arch/arm/include/asm/arch-at91/at91cap9.h
deleted file mode 100644
index 63870bc..0000000
--- a/arch/arm/include/asm/arch-at91/at91cap9.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * [origin: Linux kernel include/asm-arm/arch-at91/at91cap9.h]
- *
- * Copyright (C) 2007 Stelian Pop <stelian@popies.net>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef AT91CAP9_H
-#define AT91CAP9_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS 1 /* System Peripherals */
-#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
-#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
-#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
-#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */
-#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */
-#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */
-#define AT91CAP9_ID_US0 8 /* USART 0 */
-#define AT91CAP9_ID_US1 9 /* USART 1 */
-#define AT91CAP9_ID_US2 10 /* USART 2 */
-#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */
-#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */
-#define AT91CAP9_ID_CAN 13 /* CAN */
-#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */
-#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */
-#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */
-#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */
-#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */
-#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */
-#define AT91CAP9_ID_EMAC 22 /* Ethernet */
-#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */
-#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */
-#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */
-#define AT91CAP9_ID_LCDC 26 /* LCD Controller */
-#define AT91CAP9_ID_DMA 27 /* DMA Controller */
-#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */
-#define AT91CAP9_ID_UHP 29 /* USB Host Port */
-#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
-#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
-
-#define AT91_PIO_BASE 0xfffff200
-#define AT91_PMC_BASE 0xfffffc00
-#define AT91_RSTC_BASE 0xfffffd00
-#define AT91_PIT_BASE 0xfffffd30
-
-/*
- * Internal Memory.
- */
-#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
-#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */
-
-#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
-
-#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
-#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */
-#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
-
-#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
-
-/*
- * Cpu Name
- */
-#define CONFIG_SYS_AT91_CPU_NAME "AT91CAP9"
-
-#endif
diff --git a/arch/arm/include/asm/arch-at91/at91cap9_matrix.h b/arch/arm/include/asm/arch-at91/at91cap9_matrix.h
deleted file mode 100644
index 009a19d..0000000
--- a/arch/arm/include/asm/arch-at91/at91cap9_matrix.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * [origin: Linux kernel include/asm-arm/arch-at91/at91cap9_matrix.h]
- *
- * Copyright (C) 2007 Stelian Pop <stelian@popies.net>
- * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- * Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef AT91CAP9_MATRIX_H
-#define AT91CAP9_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
-#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */
-#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
-#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */
-#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */
-#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */
-#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
-#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
-#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
-#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
-#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
-#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
-#define AT91_MATRIX_RCB6 (1 << 6)
-#define AT91_MATRIX_RCB7 (1 << 7)
-#define AT91_MATRIX_RCB8 (1 << 8)
-#define AT91_MATRIX_RCB9 (1 << 9)
-#define AT91_MATRIX_RCB10 (1 << 10)
-#define AT91_MATRIX_RCB11 (1 << 11)
-
-#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
-#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1)
-#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */
-#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
-
-#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */
-#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */
-#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */
-
-#endif
diff --git a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
index 1b59cc6..d0bf0c2 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
@@ -15,8 +15,6 @@
#include <asm/arch/at91sam9263_matrix.h>
#elif defined(CONFIG_AT91SAM9RL)
#include <asm/arch/at91sam9rl_matrix.h>
-#elif defined(CONFIG_AT91CAP9)
-#include <asm/arch/at91cap9_matrix.h>
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
#include <asm/arch/at91sam9g45_matrix.h>
#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
diff --git a/arch/arm/include/asm/arch-at91/atmel_usba_udc.h b/arch/arm/include/asm/arch-at91/atmel_usba_udc.h
index 6f540d2..38b5012 100644
--- a/arch/arm/include/asm/arch-at91/atmel_usba_udc.h
+++ b/arch/arm/include/asm/arch-at91/atmel_usba_udc.h
@@ -31,7 +31,7 @@ static struct usba_ep_data usba_udc_ep[] = {
EP("ep5", 5, 1024, 3, 1, 1),
EP("ep6", 6, 1024, 3, 1, 1),
};
-#elif defined(CONFIG_SAMA5D3)
+#elif defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4)
static struct usba_ep_data usba_udc_ep[] = {
EP("ep0", 0, 64, 1, 0, 0),
EP("ep1", 1, 1024, 3, 1, 0),
diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h
index bf0a1bd..ff6b71b 100644
--- a/arch/arm/include/asm/arch-at91/hardware.h
+++ b/arch/arm/include/asm/arch-at91/hardware.h
@@ -23,8 +23,6 @@
# include <asm/arch/at91sam9g45.h>
#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
# include <asm/arch/at91sam9x5.h>
-#elif defined(CONFIG_AT91CAP9)
-# include <asm/arch/at91cap9.h>
#elif defined(CONFIG_SAMA5D3)
# include <asm/arch/sama5d3.h>
#elif defined(CONFIG_SAMA5D4)
diff --git a/arch/arm/include/asm/arch-at91/sama5_matrix.h b/arch/arm/include/asm/arch-at91/sama5_matrix.h
new file mode 100644
index 0000000..e324766
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/sama5_matrix.h
@@ -0,0 +1,37 @@
+/*
+ * Bus Matrix header file for the SAMA5 family
+ *
+ * Copyright (C) 2014 Atmel
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __SAMA5_MATRIX_H
+#define __SAMA5_MATRIX_H
+
+struct atmel_matrix {
+ u32 mcfg[16]; /* 0x00 ~ 0x3c: Master Configuration Register */
+ u32 scfg[16]; /* 0x40 ~ 0x7c: Slave Configuration Register */
+ u32 pras[16][2];/* 0x80 ~ 0xfc: Priority Register A/B */
+ u32 res1[20]; /* 0x100 ~ 0x14c */
+ u32 meier; /* 0x150: Master Error Interrupt Enable Register */
+ u32 meidr; /* 0x154: Master Error Interrupt Disable Register */
+ u32 meimr; /* 0x158: Master Error Interrupt Mask Register */
+ u32 mesr; /* 0x15c: Master Error Status Register */
+ u32 mear[16]; /* 0x160 ~ 0x19c: Master Error Address Register */
+ u32 res2[17]; /* 0x1A0 ~ 0x1E0 */
+ u32 wpmr; /* 0x1E4: Write Protection Mode Register */
+ u32 wpsr; /* 0x1E8: Write Protection Status Register */
+ u32 res3[5]; /* 0x1EC ~ 0x1FC */
+ u32 ssr[16]; /* 0x200 ~ 0x23c: Security Slave Register */
+ u32 sassr[16]; /* 0x240 ~ 0x27c: Security Areas Split Slave Register */
+ u32 srtsr[16]; /* 0x280 ~ 0x2bc: Security Region Top Slave */
+ u32 spselr[3]; /* 0x2c0 ~ 0x2c8: Security Peripheral Select Register */
+};
+
+/* Bit field in WPMR */
+#define ATMEL_MATRIX_WPMR_WPKEY 0x4D415400
+#define ATMEL_MATRIX_WPMR_WPEN 0x00000001
+
+#endif
diff --git a/arch/arm/include/asm/arch-at91/sama5_sfr.h b/arch/arm/include/asm/arch-at91/sama5_sfr.h
new file mode 100644
index 0000000..3081d37
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/sama5_sfr.h
@@ -0,0 +1,38 @@
+/*
+ * Special Function Register (SFR)
+ *
+ * Copyright (C) 2014 Atmel
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __SAMA5_SFR_H
+#define __SAMA5_SFR_H
+
+struct atmel_sfr {
+ u32 reserved1; /* 0x00 */
+ u32 ddrcfg; /* 0x04: DDR Configuration Register */
+ u32 reserved2; /* 0x08 */
+ u32 reserved3; /* 0x0c */
+ u32 ohciicr; /* 0x10: OHCI Interrupt Configuration Register */
+ u32 ohciisr; /* 0x14: OHCI Interrupt Status Register */
+ u32 reserved4[4]; /* 0x18 ~ 0x24 */
+ u32 secure; /* 0x28: Security Configuration Register */
+ u32 reserved5[5]; /* 0x2c ~ 0x3c */
+ u32 ebicfg; /* 0x40: EBI Configuration Register */
+ u32 reserved6[2]; /* 0x44 ~ 0x48 */
+ u32 sn0; /* 0x4c */
+ u32 sn1; /* 0x50 */
+ u32 aicredir; /* 0x54 */
+};
+
+/* Bit field in DDRCFG */
+#define ATMEL_SFR_DDRCFG_FDQIEN 0x00010000
+#define ATMEL_SFR_DDRCFG_FDQSIEN 0x00020000
+
+/* Bit field in AICREDIR */
+#define ATMEL_SFR_AICREDIR_KEY 0x5F67B102
+#define ATMEL_SFR_AICREDIR_NSAIC 0x00000001
+
+#endif
diff --git a/arch/arm/include/asm/arch-at91/sama5d4.h b/arch/arm/include/asm/arch-at91/sama5d4.h
index d851568..f30cb5f 100644
--- a/arch/arm/include/asm/arch-at91/sama5d4.h
+++ b/arch/arm/include/asm/arch-at91/sama5d4.h
@@ -126,6 +126,8 @@
#define ATMEL_BASE_ADC 0xfc034000
#define ATMEL_BASE_TWI3 0xfc038000
+#define ATMEL_BASE_MATRIX1 0xfc054000
+
#define ATMEL_BASE_SMC 0xfc05c000
#define ATMEL_BASE_PMECC (ATMEL_BASE_SMC + 0x070)
#define ATMEL_BASE_PMERRLOC (ATMEL_BASE_SMC + 0x500)
diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h
index 0b91ef6..d0ae757 100644
--- a/arch/arm/include/asm/arch-exynos/pinmux.h
+++ b/arch/arm/include/asm/arch-exynos/pinmux.h
@@ -23,6 +23,9 @@ enum {
/* Flags for SROM controller */
PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */
PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */
+
+ /* Flags for I2C */
+ PINMUX_FLAG_HS_MODE = 1 << 1, /* I2C High Speed Mode */
};
/**
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index 5e934da..7915518 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -97,8 +97,13 @@
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0
#define CONFIG_SYS_FSL_SEC_COMPAT 5
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define CONFIG_SYS_FSL_ERRATUM_A008378
#else
#error SoC not defined
#endif
+#define FSL_IFC_COMPAT "fsl,ifc"
+#define FSL_QSPI_COMPAT "fsl,ls1-qspi"
+#define FSL_DSPI_COMPAT "fsl,vf610-dspi"
+
#endif /* _ASM_ARMV7_LS102XA_CONFIG_ */
diff --git a/arch/arm/include/asm/arch-uniphier/gpio.h b/arch/arm/include/asm/arch-ls102xa/gpio.h
index 1fc4e19..b704436 100644
--- a/arch/arm/include/asm/arch-uniphier/gpio.h
+++ b/arch/arm/include/asm/arch-ls102xa/gpio.h
@@ -1,6 +1,15 @@
/*
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
* Dummy header file to enable CONFIG_OF_CONTROL.
* If CONFIG_OF_CONTROL is enabled, lib/fdtdec.c is compiled.
* It includes <asm/arch/gpio.h> via <asm/gpio.h>, so those SoCs that enable
- * OF_CONTROL must have arch/gpio.h even if GPIO is not supported.
+ * OF_CONTROL must have arch/gpio.h.
*/
+
+#ifndef __ASM_ARCH_LS102XA_GPIO_H_
+#define __ASM_ARCH_LS102XA_GPIO_H_
+
+#endif
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index 697d4ca..f70d568 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -105,6 +105,8 @@ struct ccsr_gur {
#define SCFG_ETSECDMAMCR_LE_BD_FR 0xf8001a0f
#define SCFG_ETSECCMCR_GE2_CLK125 0x04000000
+#define SCFG_ETSECCMCR_GE0_CLK125 0x00000000
+#define SCFG_ETSECCMCR_GE1_CLK125 0x08000000
#define SCFG_PIXCLKCR_PXCKEN 0x80000000
#define SCFG_QSPI_CLKSEL 0xc0100000
@@ -456,6 +458,8 @@ struct ccsr_ddr {
#define CCI400_CTRLORD_TERM_BARRIER 0x00000008
#define CCI400_CTRLORD_EN_BARRIER 0
#define CCI400_SHAORD_NON_SHAREABLE 0x00000002
+#define CCI400_DVM_MESSAGE_REQ_EN 0x00000002
+#define CCI400_SNOOP_REQ_EN 0x00000001
/* CCI-400 registers */
struct ccsr_cci400 {
diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h
index 0b78c1c..3ce270c 100644
--- a/arch/arm/include/asm/arch-omap3/mem.h
+++ b/arch/arm/include/asm/arch-omap3/mem.h
@@ -249,6 +249,49 @@ enum {
#define MICRON_RASWIDTH_200 14
#define MICRON_V_MCFG_200(size) MCFG((size), MICRON_RASWIDTH_200)
+/* Samsung K4X51163PG - FGC6 (165MHz optimized) 6.06ns - from 2010.90 src */
+#define SAMSUNG_TDAL_165 5
+#define SAMSUNG_TDPL_165 2
+#define SAMSUNG_TRRD_165 2
+#define SAMSUNG_TRCD_165 3
+#define SAMSUNG_TRP_165 3
+#define SAMSUNG_TRAS_165 7
+#define SAMSUNG_TRC_165 10
+#define SAMSUNG_TRFC_165 12
+
+#define SAMSUNG_V_ACTIMA_165 \
+ ACTIM_CTRLA(SAMSUNG_TRFC_165, SAMSUNG_TRC_165, \
+ SAMSUNG_TRAS_165, SAMSUNG_TRP_165, \
+ SAMSUNG_TRCD_165, SAMSUNG_TRRD_165, \
+ SAMSUNG_TDPL_165, SAMSUNG_TDAL_165)
+
+#define SAMSUNG_TWTR_165 1
+#define SAMSUNG_TCKE_165 2
+#define SAMSUNG_XSR_165 20
+#define SAMSUNG_TXP_165 5
+
+#define SAMSUNG_V_ACTIMB_165 \
+ ACTIM_CTRLB(SAMSUNG_TWTR_165, SAMSUNG_TCKE_165, \
+ SAMSUNG_TXP_165, SAMSUNG_XSR_165)
+
+#define SAMSUNG_RASWIDTH_165 14
+#define SAMSUNG_V_MCFG_165(size) \
+ V_MCFG_RASWIDTH(SAMSUNG_RASWIDTH_165) | V_MCFG_CASWIDTH_10B | \
+ V_MCFG_ADDRMUXLEGACY_FLEX | V_MCFG_RAMSIZE(size) | \
+ V_MCFG_BANKALLOCATION_RBC | V_MCFG_RAMTYPE_DDR
+
+/* TODO: find which register these were taken from */
+
+#define SAMSUNG_BL_165 0x2
+#define SAMSUNG_SIL_165 0x0
+#define SAMSUNG_CASL_165 0x3
+#define SAMSUNG_WBST_165 0x0
+#define SAMSUNG_V_MR_165 ((SAMSUNG_WBST_165 << 9) | \
+ (SAMSUNG_CASL_165 << 4) | (SAMSUNG_SIL_165 << 3) | \
+ (SAMSUNG_BL_165))
+
+#define SAMSUNG_SHARING 0x00003700
+
/* NUMONYX part of IGEP v2 (165MHz optimized) 6.06ns */
#define NUMONYX_TDAL_165 6 /* Twr/Tck + Trp/tck */
/* 15/6 + 18/6 = 5.5 -> 6 */
diff --git a/arch/arm/include/asm/arch-omap3/mmc_host_def.h b/arch/arm/include/asm/arch-omap3/mmc_host_def.h
index 0ba621a..9f2896c 100644
--- a/arch/arm/include/asm/arch-omap3/mmc_host_def.h
+++ b/arch/arm/include/asm/arch-omap3/mmc_host_def.h
@@ -51,6 +51,7 @@ typedef struct t2 {
#define PBIASLITEPWRDNZ0 (1 << 1)
#define PBIASSPEEDCTRL0 (1 << 2)
#define PBIASLITEPWRDNZ1 (1 << 9)
+#define PBIASLITEVMODE0 (1 << 0)
#define CTLPROGIO1SPEEDCTRL (1 << 20)
diff --git a/arch/arm/include/asm/arch-omap3/mux.h b/arch/arm/include/asm/arch-omap3/mux.h
index eba4a5c..3277b40 100644
--- a/arch/arm/include/asm/arch-omap3/mux.h
+++ b/arch/arm/include/asm/arch-omap3/mux.h
@@ -15,6 +15,12 @@
* PTU - Pull type Up
* DIS - Pull type selection is inactive
* EN - Pull type selection is active
+ * SB_LOW - Standby mode configuration: Output low-level
+ * SB_HI - Standby mode configuration: Output high-level
+ * SB_HIZ - Standby mode configuration: Output hi-impedence
+ * SB_PD - Standby mode pull-down enabled
+ * SB_PU - Standby mode pull-up enabled
+ * WKEN - Wakeup input enabled
* M0 - Mode 0
*/
@@ -26,6 +32,13 @@
#define EN (1 << 3)
#define DIS (0 << 3)
+#define SB_LOW (1 << 9)
+#define SB_HI (5 << 9)
+#define SB_HIZ (2 << 9)
+#define SB_PD (1 << 12)
+#define SB_PU (3 << 12)
+#define WKEN (1 << 14)
+
#define M0 0
#define M1 1
#define M2 2
@@ -36,8 +49,8 @@
#define M7 7
/*
- * To get the actual address the offset has to added
- * with OMAP34XX_CTRL_BASE to get the actual address
+ * To get the actual address the offset has to be added
+ * to OMAP34XX_CTRL_BASE
*/
/*SDRC*/
@@ -78,6 +91,33 @@
#define CONTROL_PADCONF_SDRC_DQS1 0x0074
#define CONTROL_PADCONF_SDRC_DQS2 0x0076
#define CONTROL_PADCONF_SDRC_DQS3 0x0078
+#define CONTROL_PADCONF_SDRC_BA0 0x05A0
+#define CONTROL_PADCONF_SDRC_BA1 0x05A2
+#define CONTROL_PADCONF_SDRC_A0 0x05A4
+#define CONTROL_PADCONF_SDRC_A1 0x05A6
+#define CONTROL_PADCONF_SDRC_A2 0x05A8
+#define CONTROL_PADCONF_SDRC_A3 0x05AA
+#define CONTROL_PADCONF_SDRC_A4 0x05AC
+#define CONTROL_PADCONF_SDRC_A5 0x05AE
+#define CONTROL_PADCONF_SDRC_A6 0x05B0
+#define CONTROL_PADCONF_SDRC_A7 0x05B2
+#define CONTROL_PADCONF_SDRC_A8 0x05B4
+#define CONTROL_PADCONF_SDRC_A9 0x05B6
+#define CONTROL_PADCONF_SDRC_A10 0x05B8
+#define CONTROL_PADCONF_SDRC_A11 0x05BA
+#define CONTROL_PADCONF_SDRC_A12 0x05BC
+#define CONTROL_PADCONF_SDRC_A13 0x05BE
+#define CONTROL_PADCONF_SDRC_A14 0x05C0
+#define CONTROL_PADCONF_SDRC_NCS0 0x05C2
+#define CONTROL_PADCONF_SDRC_NCS1 0x05C4
+#define CONTROL_PADCONF_SDRC_NCLK 0x05C6
+#define CONTROL_PADCONF_SDRC_NRAS 0x05C8
+#define CONTROL_PADCONF_SDRC_NCAS 0x05CA
+#define CONTROL_PADCONF_SDRC_NWE 0x05CC
+#define CONTROL_PADCONF_SDRC_DM0 0x05CE
+#define CONTROL_PADCONF_SDRC_DM1 0x05D0
+#define CONTROL_PADCONF_SDRC_DM2 0x05D2
+#define CONTROL_PADCONF_SDRC_DM3 0x05D4
/*GPMC*/
#define CONTROL_PADCONF_GPMC_A1 0x007A
#define CONTROL_PADCONF_GPMC_A2 0x007C
@@ -89,6 +129,7 @@
#define CONTROL_PADCONF_GPMC_A8 0x0088
#define CONTROL_PADCONF_GPMC_A9 0x008A
#define CONTROL_PADCONF_GPMC_A10 0x008C
+#define CONTROL_PADCONF_GPMC_A11 0x0264
#define CONTROL_PADCONF_GPMC_D0 0x008E
#define CONTROL_PADCONF_GPMC_D1 0x0090
#define CONTROL_PADCONF_GPMC_D2 0x0092
@@ -323,6 +364,8 @@
#define CONTROL_PADCONF_ETK_D13_ES2 0x05F6
#define CONTROL_PADCONF_ETK_D14_ES2 0x05F8
#define CONTROL_PADCONF_ETK_D15_ES2 0x05FA
+#define CONTROL_PADCONF_JTAG_RTCK 0x0A4E
+#define CONTROL_PADCONF_JTAG_TDO 0x0A50
/*Die to Die */
#define CONTROL_PADCONF_D2D_MCAD0 0x01E4
#define CONTROL_PADCONF_D2D_MCAD1 0x01E6
@@ -433,6 +476,10 @@
#define CONTROL_PADCONF_SYS_BOOT8 0x0226
/* AM/DM37xx specific */
+#define CONTROL_PADCONF_GPIO112 0x0134
+#define CONTROL_PADCONF_GPIO113 0x0136
+#define CONTROL_PADCONF_GPIO114 0x0138
+#define CONTROL_PADCONF_GPIO115 0x013A
#define CONTROL_PADCONF_GPIO127 0x0A54
#define CONTROL_PADCONF_GPIO126 0x0A56
#define CONTROL_PADCONF_GPIO128 0x0A58
diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h
index 34bd8c5..bcf92fb 100644
--- a/arch/arm/include/asm/arch-omap3/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap3/sys_proto.h
@@ -23,6 +23,7 @@ struct emu_hal_params {
/* Board SDRC timing values */
struct board_sdrc_timings {
+ u32 sharing;
u32 mcfg;
u32 ctrla;
u32 ctrlb;
diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h
index 0dc584b..f8e5630 100644
--- a/arch/arm/include/asm/arch-omap5/clock.h
+++ b/arch/arm/include/asm/arch-omap5/clock.h
@@ -236,13 +236,20 @@
#define VDD_MPU_ES2_LOW 880
#define VDD_MM_ES2_LOW 880
-/* TPS659038 Voltage settings in mv for OPP_NOMINAL */
-#define VDD_MPU_DRA752 1090
+/* DRA74x/75x voltage settings in mv for OPP_NOM per DM */
+#define VDD_MPU_DRA752 1100
#define VDD_EVE_DRA752 1060
#define VDD_GPU_DRA752 1060
-#define VDD_CORE_DRA752 1030
+#define VDD_CORE_DRA752 1060
#define VDD_IVA_DRA752 1060
+/* DRA72x voltage settings in mv for OPP_NOM per DM */
+#define VDD_MPU_DRA72x 1100
+#define VDD_EVE_DRA72x 1060
+#define VDD_GPU_DRA72x 1060
+#define VDD_CORE_DRA72x 1060
+#define VDD_IVA_DRA72x 1060
+
/* Efuse register offsets for DRA7xx platform */
#define DRA752_EFUSE_BASE 0x4A002000
#define DRA752_EFUSE_REGBITS 16
@@ -284,6 +291,13 @@
#define TPS659038_REG_ADDR_SMPS7 0x33
#define TPS659038_REG_ADDR_SMPS8 0x37
+/* TPS65917 */
+#define TPS65917_I2C_SLAVE_ADDR 0x58
+#define TPS65917_REG_ADDR_SMPS1 0x23
+#define TPS65917_REG_ADDR_SMPS2 0x27
+#define TPS65917_REG_ADDR_SMPS3 0x2F
+
+
/* TPS */
#define TPS62361_I2C_SLAVE_ADDR 0x60
#define TPS62361_REG_ADDR_SET0 0x0
diff --git a/arch/arm/include/asm/arch-pantheon/gpio.h b/arch/arm/include/asm/arch-pantheon/gpio.h
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/arch/arm/include/asm/arch-pantheon/gpio.h
diff --git a/arch/arm/include/asm/arch-rmobile/r8a7790.h b/arch/arm/include/asm/arch-rmobile/r8a7790.h
index 132d58c..748b802 100644
--- a/arch/arm/include/asm/arch-rmobile/r8a7790.h
+++ b/arch/arm/include/asm/arch-rmobile/r8a7790.h
@@ -28,6 +28,12 @@
#define MSTP10_BITS 0xFFFEFFE0
#define MSTP11_BITS 0x00000000
+/* SDHI */
+#define CONFIG_SYS_SH_SDHI1_BASE 0xEE120000
+#define CONFIG_SYS_SH_SDHI2_BASE 0xEE140000
+#define CONFIG_SYS_SH_SDHI3_BASE 0xEE160000
+#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 4
+
#define R8A7790_CUT_ES2X 2
#define IS_R8A7790_ES2() \
(rmobile_get_cpu_rev_integer() == R8A7790_CUT_ES2X)
diff --git a/arch/arm/include/asm/arch-rmobile/r8a7791.h b/arch/arm/include/asm/arch-rmobile/r8a7791.h
index d2cbcd7..1d06b65 100644
--- a/arch/arm/include/asm/arch-rmobile/r8a7791.h
+++ b/arch/arm/include/asm/arch-rmobile/r8a7791.h
@@ -17,6 +17,11 @@
/* SH-I2C */
#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000
+/* SDHI */
+#define CONFIG_SYS_SH_SDHI1_BASE 0xEE140000
+#define CONFIG_SYS_SH_SDHI2_BASE 0xEE160000
+#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 3
+
#define DBSC3_1_QOS_R0_BASE 0xE67A1000
#define DBSC3_1_QOS_R1_BASE 0xE67A1100
#define DBSC3_1_QOS_R2_BASE 0xE67A1200
diff --git a/arch/arm/include/asm/arch-rmobile/r8a7793.h b/arch/arm/include/asm/arch-rmobile/r8a7793.h
index 1abdeb7..3efc62a 100644
--- a/arch/arm/include/asm/arch-rmobile/r8a7793.h
+++ b/arch/arm/include/asm/arch-rmobile/r8a7793.h
@@ -18,6 +18,11 @@
/* SH-I2C */
#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000
+/* SDHI */
+#define CONFIG_SYS_SH_SDHI1_BASE 0xEE140000
+#define CONFIG_SYS_SH_SDHI2_BASE 0xEE160000
+#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 3
+
#define DBSC3_1_QOS_R0_BASE 0xE67A1000
#define DBSC3_1_QOS_R1_BASE 0xE67A1100
#define DBSC3_1_QOS_R2_BASE 0xE67A1200
diff --git a/arch/arm/include/asm/arch-rmobile/r8a7794.h b/arch/arm/include/asm/arch-rmobile/r8a7794.h
index d7c9004..6d11fa4 100644
--- a/arch/arm/include/asm/arch-rmobile/r8a7794.h
+++ b/arch/arm/include/asm/arch-rmobile/r8a7794.h
@@ -27,4 +27,9 @@
#define MSTP10_BITS 0xFFFEFFE0
#define MSTP11_BITS 0x000001C0
+/* SDHI */
+#define CONFIG_SYS_SH_SDHI1_BASE 0xEE140000
+#define CONFIG_SYS_SH_SDHI2_BASE 0xEE160000
+#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 3
+
#endif /* __ASM_ARCH_R8A7794_H */
diff --git a/arch/arm/include/asm/arch-rmobile/rcar-base.h b/arch/arm/include/asm/arch-rmobile/rcar-base.h
index 23c4bba..d594cd7 100644
--- a/arch/arm/include/asm/arch-rmobile/rcar-base.h
+++ b/arch/arm/include/asm/arch-rmobile/rcar-base.h
@@ -82,6 +82,9 @@
#define CONFIG_SYS_RCAR_I2C2_BASE 0xE6530000
#define CONFIG_SYS_RCAR_I2C3_BASE 0xE6540000
+/* SDHI */
+#define CONFIG_SYS_SH_SDHI0_BASE 0xEE100000
+
#define S3C_BASE 0xE6784000
#define S3C_INT_BASE 0xE6784A00
#define S3C_MEDIA_BASE 0xE6784B00
diff --git a/arch/arm/include/asm/arch-rmobile/sh_sdhi.h b/arch/arm/include/asm/arch-rmobile/sh_sdhi.h
new file mode 100644
index 0000000..057bf3f
--- /dev/null
+++ b/arch/arm/include/asm/arch-rmobile/sh_sdhi.h
@@ -0,0 +1,168 @@
+/*
+ * drivers/mmc/sh-sdhi.h
+ *
+ * SD/MMC driver for Reneas rmobile ARM SoCs
+ *
+ * Copyright (C) 2013-2014 Renesas Electronics Corporation
+ * Copyright (C) 2008-2009 Renesas Solutions Corp.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SH_SDHI_H
+#define _SH_SDHI_H
+
+#define SDHI_CMD (0x0000 >> 1)
+#define SDHI_PORTSEL (0x0004 >> 1)
+#define SDHI_ARG0 (0x0008 >> 1)
+#define SDHI_ARG1 (0x000C >> 1)
+#define SDHI_STOP (0x0010 >> 1)
+#define SDHI_SECCNT (0x0014 >> 1)
+#define SDHI_RSP00 (0x0018 >> 1)
+#define SDHI_RSP01 (0x001C >> 1)
+#define SDHI_RSP02 (0x0020 >> 1)
+#define SDHI_RSP03 (0x0024 >> 1)
+#define SDHI_RSP04 (0x0028 >> 1)
+#define SDHI_RSP05 (0x002C >> 1)
+#define SDHI_RSP06 (0x0030 >> 1)
+#define SDHI_RSP07 (0x0034 >> 1)
+#define SDHI_INFO1 (0x0038 >> 1)
+#define SDHI_INFO2 (0x003C >> 1)
+#define SDHI_INFO1_MASK (0x0040 >> 1)
+#define SDHI_INFO2_MASK (0x0044 >> 1)
+#define SDHI_CLK_CTRL (0x0048 >> 1)
+#define SDHI_SIZE (0x004C >> 1)
+#define SDHI_OPTION (0x0050 >> 1)
+#define SDHI_ERR_STS1 (0x0058 >> 1)
+#define SDHI_ERR_STS2 (0x005C >> 1)
+#define SDHI_BUF0 (0x0060 >> 1)
+#define SDHI_SDIO_MODE (0x0068 >> 1)
+#define SDHI_SDIO_INFO1 (0x006C >> 1)
+#define SDHI_SDIO_INFO1_MASK (0x0070 >> 1)
+#define SDHI_CC_EXT_MODE (0x01B0 >> 1)
+#define SDHI_SOFT_RST (0x01C0 >> 1)
+#define SDHI_VERSION (0x01C4 >> 1)
+#define SDHI_HOST_MODE (0x01C8 >> 1)
+#define SDHI_SDIF_MODE (0x01CC >> 1)
+#define SDHI_EXT_SWAP (0x01E0 >> 1)
+#define SDHI_SD_DMACR (0x0324 >> 1)
+
+/* SDHI CMD VALUE */
+#define CMD_MASK 0x0000ffff
+#define SDHI_APP 0x0040
+#define SDHI_SD_APP_SEND_SCR 0x0073
+#define SDHI_SD_SWITCH 0x1C06
+
+/* SDHI_PORTSEL */
+#define USE_1PORT (1 << 8) /* 1 port */
+
+/* SDHI_ARG */
+#define ARG0_MASK 0x0000ffff
+#define ARG1_MASK 0x0000ffff
+
+/* SDHI_STOP */
+#define STOP_SEC_ENABLE (1 << 8)
+
+/* SDHI_INFO1 */
+#define INFO1_RESP_END (1 << 0)
+#define INFO1_ACCESS_END (1 << 2)
+#define INFO1_CARD_RE (1 << 3)
+#define INFO1_CARD_IN (1 << 4)
+#define INFO1_ISD0CD (1 << 5)
+#define INFO1_WRITE_PRO (1 << 7)
+#define INFO1_DATA3_CARD_RE (1 << 8)
+#define INFO1_DATA3_CARD_IN (1 << 9)
+#define INFO1_DATA3 (1 << 10)
+
+/* SDHI_INFO2 */
+#define INFO2_CMD_ERROR (1 << 0)
+#define INFO2_CRC_ERROR (1 << 1)
+#define INFO2_END_ERROR (1 << 2)
+#define INFO2_TIMEOUT (1 << 3)
+#define INFO2_BUF_ILL_WRITE (1 << 4)
+#define INFO2_BUF_ILL_READ (1 << 5)
+#define INFO2_RESP_TIMEOUT (1 << 6)
+#define INFO2_SDDAT0 (1 << 7)
+#define INFO2_BRE_ENABLE (1 << 8)
+#define INFO2_BWE_ENABLE (1 << 9)
+#define INFO2_CBUSY (1 << 14)
+#define INFO2_ILA (1 << 15)
+#define INFO2_ALL_ERR (0x807f)
+
+/* SDHI_INFO1_MASK */
+#define INFO1M_RESP_END (1 << 0)
+#define INFO1M_ACCESS_END (1 << 2)
+#define INFO1M_CARD_RE (1 << 3)
+#define INFO1M_CARD_IN (1 << 4)
+#define INFO1M_DATA3_CARD_RE (1 << 8)
+#define INFO1M_DATA3_CARD_IN (1 << 9)
+#define INFO1M_ALL (0xffff)
+#define INFO1M_SET (INFO1M_RESP_END | \
+ INFO1M_ACCESS_END | \
+ INFO1M_DATA3_CARD_RE | \
+ INFO1M_DATA3_CARD_IN)
+
+/* SDHI_INFO2_MASK */
+#define INFO2M_CMD_ERROR (1 << 0)
+#define INFO2M_CRC_ERROR (1 << 1)
+#define INFO2M_END_ERROR (1 << 2)
+#define INFO2M_TIMEOUT (1 << 3)
+#define INFO2M_BUF_ILL_WRITE (1 << 4)
+#define INFO2M_BUF_ILL_READ (1 << 5)
+#define INFO2M_RESP_TIMEOUT (1 << 6)
+#define INFO2M_BRE_ENABLE (1 << 8)
+#define INFO2M_BWE_ENABLE (1 << 9)
+#define INFO2M_ILA (1 << 15)
+#define INFO2M_ALL (0xffff)
+#define INFO2M_ALL_ERR (0x807f)
+
+/* SDHI_CLK_CTRL */
+#define CLK_ENABLE (1 << 8)
+
+/* SDHI_OPTION */
+#define OPT_BUS_WIDTH_1 (1 << 15) /* bus width = 1 bit */
+
+/* SDHI_ERR_STS1 */
+#define ERR_STS1_CRC_ERROR ((1 << 11) | (1 << 10) | (1 << 9) | \
+ (1 << 8) | (1 << 5))
+#define ERR_STS1_CMD_ERROR ((1 << 4) | (1 << 3) | (1 << 2) | \
+ (1 << 1) | (1 << 0))
+
+/* SDHI_ERR_STS2 */
+#define ERR_STS2_RES_TIMEOUT (1 << 0)
+#define ERR_STS2_RES_STOP_TIMEOUT ((1 << 0) | (1 << 1))
+#define ERR_STS2_SYS_ERROR ((1 << 6) | (1 << 5) | (1 << 4) | \
+ (1 << 3) | (1 << 2) | (1 << 1) | \
+ (1 << 0))
+
+/* SDHI_SDIO_MODE */
+#define SDIO_MODE_ON (1 << 0)
+#define SDIO_MODE_OFF (0 << 0)
+
+/* SDHI_SDIO_INFO1 */
+#define SDIO_INFO1_IOIRQ (1 << 0)
+#define SDIO_INFO1_EXPUB52 (1 << 14)
+#define SDIO_INFO1_EXWT (1 << 15)
+
+/* SDHI_SDIO_INFO1_MASK */
+#define SDIO_INFO1M_CLEAR ((1 << 1) | (1 << 2))
+#define SDIO_INFO1M_ON ((1 << 15) | (1 << 14) | (1 << 2) | \
+ (1 << 1) | (1 << 0))
+
+/* SDHI_EXT_SWAP */
+#define SET_SWAP ((1 << 6) | (1 << 7)) /* SWAP */
+
+/* SDHI_SOFT_RST */
+#define SOFT_RST_ON (0 << 0)
+#define SOFT_RST_OFF (1 << 0)
+
+#define CLKDEV_SD_DATA 25000000 /* 25 MHz */
+#define CLKDEV_HS_DATA 50000000 /* 50 MHz */
+#define CLKDEV_MMC_DATA 20000000 /* 20MHz */
+#define CLKDEV_INIT 400000 /* 100 - 400 KHz */
+
+/* For quirk */
+#define SH_SDHI_QUIRK_16BIT_BUF (1)
+int sh_sdhi_init(unsigned long addr, int ch, unsigned long quirks);
+
+#endif /* _SH_SDHI_H */
diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h
index 505c363..3e5d999 100644
--- a/arch/arm/include/asm/arch-sunxi/clock.h
+++ b/arch/arm/include/asm/arch-sunxi/clock.h
@@ -17,6 +17,8 @@
/* clock control module regs definition */
#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I)
#include <asm/arch/clock_sun6i.h>
+#elif defined(CONFIG_MACH_SUN9I)
+#include <asm/arch/clock_sun9i.h>
#else
#include <asm/arch/clock_sun4i.h>
#endif
@@ -24,10 +26,6 @@
#ifndef __ASSEMBLY__
int clock_init(void);
int clock_twi_onoff(int port, int state);
-void clock_set_pll1(unsigned int hz);
-void clock_set_pll3(unsigned int hz);
-unsigned int clock_get_pll5p(void);
-unsigned int clock_get_pll6(void);
void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz);
void clock_init_safe(void);
void clock_init_uart(void);
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
index 84a9a2b..d297ed0 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h
@@ -186,6 +186,7 @@ struct sunxi_ccm_reg {
/* ahb clock gate bit offset (second register) */
#define AHB_GATE_OFFSET_GMAC 17
+#define AHB_GATE_OFFSET_DE_FE0 14
#define AHB_GATE_OFFSET_DE_BE0 12
#define AHB_GATE_OFFSET_HDMI 11
#define AHB_GATE_OFFSET_LCD1 5
@@ -266,7 +267,10 @@ struct sunxi_ccm_reg {
#define CCM_MMC_CTRL_PLL5 (0x2 << 24)
#define CCM_MMC_CTRL_ENABLE (0x1 << 31)
+#define CCM_DRAM_GATE_OFFSET_DE_FE1 24 /* Note the order of FE1 and */
+#define CCM_DRAM_GATE_OFFSET_DE_FE0 25 /* FE0 is swapped ! */
#define CCM_DRAM_GATE_OFFSET_DE_BE0 26
+#define CCM_DRAM_GATE_OFFSET_DE_BE1 27
#define CCM_LCD_CH0_CTRL_PLL3 (0 << 24)
#define CCM_LCD_CH0_CTRL_PLL7 (1 << 24)
@@ -301,6 +305,8 @@ struct sunxi_ccm_reg {
#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2
#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2)
#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2)
+#define CCM_GMAC_CTRL_RX_CLK_DELAY(x) ((x) << 5)
+#define CCM_GMAC_CTRL_TX_CLK_DELAY(x) ((x) << 10)
#define CCM_USB_CTRL_PHY0_RST (0x1 << 0)
#define CCM_USB_CTRL_PHY1_RST (0x1 << 1)
@@ -320,4 +326,11 @@ struct sunxi_ccm_reg {
#define CCM_DE_CTRL_RST (1 << 30)
#define CCM_DE_CTRL_GATE (1 << 31)
+#ifndef __ASSEMBLY__
+void clock_set_pll1(unsigned int hz);
+void clock_set_pll3(unsigned int hz);
+unsigned int clock_get_pll5p(void);
+unsigned int clock_get_pll6(void);
+#endif
+
#endif /* _SUNXI_CLOCK_SUN4I_H */
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index 4711260..8a80385 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -243,6 +243,8 @@ struct sunxi_ccm_reg {
#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2
#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2)
#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2)
+#define CCM_GMAC_CTRL_RX_CLK_DELAY(x) ((x) << 5)
+#define CCM_GMAC_CTRL_TX_CLK_DELAY(x) ((x) << 10)
#define MDFS_CLK_DEFAULT 0x81000002 /* PLL6 / 3 */
@@ -320,6 +322,11 @@ struct sunxi_ccm_reg {
#define CCM_DE_CTRL_PLL10 (5 << 24)
#define CCM_DE_CTRL_GATE (1 << 31)
+#ifndef __ASSEMBLY__
+void clock_set_pll1(unsigned int hz);
+void clock_set_pll3(unsigned int hz);
void clock_set_pll5(unsigned int clk, bool sigma_delta_enable);
+unsigned int clock_get_pll6(void);
+#endif
#endif /* _SUNXI_CLOCK_SUN6I_H */
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun9i.h b/arch/arm/include/asm/arch-sunxi/clock_sun9i.h
new file mode 100644
index 0000000..c506b0a
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun9i.h
@@ -0,0 +1,139 @@
+/*
+ * sun9i clock register definitions
+ *
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_CLOCK_SUN9I_H
+#define _SUNXI_CLOCK_SUN9I_H
+
+struct sunxi_ccm_reg {
+ u32 pll1_c0_cfg; /* 0x00 c0cpu# pll configuration */
+ u32 pll2_c1_cfg; /* 0x04 c1cpu# pll configuration */
+ u32 pll3_audio_cfg; /* 0x08 audio pll configuration */
+ u32 pll4_periph0_cfg; /* 0x0c peripheral0 pll configuration */
+ u32 pll5_ve_cfg; /* 0x10 videoengine pll configuration */
+ u32 pll6_ddr_cfg; /* 0x14 ddr pll configuration */
+ u32 pll7_video0_cfg; /* 0x18 video0 pll configuration */
+ u32 pll8_video1_cfg; /* 0x1c video1 pll configuration */
+ u32 pll9_gpu_cfg; /* 0x20 gpu pll configuration */
+ u32 pll10_de_cfg; /* 0x24 displayengine pll configuration */
+ u32 pll11_isp_cfg; /* 0x28 isp pll6 ontrol */
+ u32 pll12_periph1_cfg; /* 0x2c peripheral1 pll configuration */
+ u8 reserved1[0x20]; /* 0x30 */
+ u32 cpu_clk_source; /* 0x50 cpu clk source configuration */
+ u32 c0_cfg; /* 0x54 cpu cluster 0 clock configuration */
+ u32 c1_cfg; /* 0x58 cpu cluster 1 clock configuration */
+ u32 gtbus_cfg; /* 0x5c gtbus clock configuration */
+ u32 ahb0_cfg; /* 0x60 ahb0 clock configuration */
+ u32 ahb1_cfg; /* 0x64 ahb1 clock configuration */
+ u32 ahb2_cfg; /* 0x68 ahb2 clock configuration */
+ u8 reserved2[0x04]; /* 0x6c */
+ u32 apb0_cfg; /* 0x70 apb0 clock configuration */
+ u32 apb1_cfg; /* 0x74 apb1 clock configuration */
+ u32 cci400_cfg; /* 0x78 cci400 clock configuration */
+ u8 reserved3[0x04]; /* 0x7c */
+ u32 ats_cfg; /* 0x80 ats clock configuration */
+ u32 trace_cfg; /* 0x84 trace clock configuration */
+ u8 reserved4[0xf8]; /* 0x88 */
+ u32 clk_output_a; /* 0x180 clk_output_a */
+ u32 clk_output_b; /* 0x184 clk_output_a */
+ u8 reserved5[0x278]; /* 0x188 */
+
+ u32 nand0_clk_cfg0; /* 0x400 nand0 clock configuration0 */
+ u32 nand0_clk_cfg1; /* 0x404 nand1 clock configuration */
+ u8 reserved6[0x08]; /* 0x408 */
+ u32 sd0_clk_cfg; /* 0x410 sd0 clock configuration */
+ u32 sd1_clk_cfg; /* 0x414 sd1 clock configuration */
+ u32 sd2_clk_cfg; /* 0x418 sd2 clock configuration */
+ u32 sd3_clk_cfg; /* 0x41c sd3 clock configuration */
+ u8 reserved7[0x08]; /* 0x420 */
+ u32 ts_clk_cfg; /* 0x428 transport stream clock cfg */
+ u32 ss_clk_cfg; /* 0x42c security system clock cfg */
+ u32 spi0_clk_cfg; /* 0x430 spi0 clock configuration */
+ u32 spi1_clk_cfg; /* 0x434 spi1 clock configuration */
+ u32 spi2_clk_cfg; /* 0x438 spi2 clock configuration */
+ u32 spi3_clk_cfg; /* 0x43c spi3 clock configuration */
+ u8 reserved8[0x50]; /* 0x440 */
+ u32 de_clk_cfg; /* 0x490 display engine clock configuration */
+ u8 reserved9[0x04]; /* 0x494 */
+ u32 mp_clk_cfg; /* 0x498 mp clock configuration */
+ u32 lcd0_clk_cfg; /* 0x49c LCD0 module clock */
+ u32 lcd1_clk_cfg; /* 0x4a0 LCD1 module clock */
+ u8 reserved10[0x1c]; /* 0x4a4 */
+ u32 csi_isp_clk_cfg; /* 0x4c0 CSI ISP module clock */
+ u32 csi0_clk_cfg; /* 0x4c4 CSI0 module clock */
+ u32 csi1_clk_cfg; /* 0x4c8 CSI1 module clock */
+ u32 fd_clk_cfg; /* 0x4cc FD module clock */
+ u32 ve_clk_cfg; /* 0x4d0 VE module clock */
+ u32 avs_clk_cfg; /* 0x4d4 AVS module clock */
+ u8 reserved11[0x18]; /* 0x4d8 */
+ u32 gpu_core_clk_cfg; /* 0x4f0 GPU core clock config */
+ u32 gpu_mem_clk_cfg; /* 0x4f4 GPU memory clock config */
+ u32 gpu_axi_clk_cfg; /* 0x4f8 GPU AXI clock config */
+ u8 reserved12[0x10]; /* 0x4fc */
+ u32 gp_adc_clk_cfg; /* 0x50c General Purpose ADC clk config */
+ u8 reserved13[0x70]; /* 0x510 */
+
+ u32 ahb_gate0; /* 0x580 AHB0 Gating Register */
+ u32 ahb_gate1; /* 0x584 AHB1 Gating Register */
+ u32 ahb_gate2; /* 0x588 AHB2 Gating Register */
+ u8 reserved14[0x04]; /* 0x58c */
+ u32 apb0_gate; /* 0x590 APB0 Clock Gating Register */
+ u32 apb1_gate; /* 0x594 APB1 Clock Gating Register */
+ u8 reserved15[0x08]; /* 0x598 */
+ u32 ahb_reset0_cfg; /* 0x5a0 AHB0 Software Reset Register */
+ u32 ahb_reset1_cfg; /* 0x5a4 AHB1 Software Reset Register */
+ u32 ahb_reset2_cfg; /* 0x5a8 AHB2 Software Reset Register */
+ u8 reserved16[0x04]; /* 0x5ac */
+ u32 apb0_reset_cfg; /* 0x5b0 Bus Software Reset Register 3 */
+ u32 apb1_reset_cfg; /* 0x5b4 Bus Software Reset Register 4 */
+};
+
+/* pll4_periph0_cfg */
+#define PLL4_CFG_DEFAULT 0x90002800 /* 960 MHz */
+
+#define CCM_PLL4_CTRL_N_SHIFT 8
+#define CCM_PLL4_CTRL_N_MASK (0xff << CCM_PLL4_CTRL_N_SHIFT)
+#define CCM_PLL4_CTRL_P_SHIFT 16
+#define CCM_PLL4_CTRL_P_MASK (0x1 << CCM_PLL4_CTRL_P_SHIFT)
+#define CCM_PLL4_CTRL_M_SHIFT 18
+#define CCM_PLL4_CTRL_M_MASK (0x1 << CCM_PLL4_CTRL_M_SHIFT)
+
+/* sd#_clk_cfg fields */
+#define CCM_MMC_CTRL_M(x) ((x) - 1)
+#define CCM_MMC_CTRL_OCLK_DLY(x) ((x) << 8)
+#define CCM_MMC_CTRL_N(x) ((x) << 16)
+#define CCM_MMC_CTRL_SCLK_DLY(x) ((x) << 20)
+#define CCM_MMC_CTRL_OSCM24 (0 << 24)
+#define CCM_MMC_CTRL_PLL_PERIPH0 (1 << 24)
+#define CCM_MMC_CTRL_ENABLE (1 << 31)
+
+/* ahb_gate0 fields */
+/* On sun9i all sdc-s share their ahb gate, so ignore (x) */
+#define AHB_GATE_OFFSET_MMC(x) 8
+
+/* apb1_gate fields */
+#define APB1_GATE_UART_SHIFT 16
+#define APB1_GATE_UART_MASK (0xff << APB1_GATE_UART_SHIFT)
+#define APB1_GATE_TWI_SHIFT 0
+#define APB1_GATE_TWI_MASK (0xf << APB1_GATE_TWI_SHIFT)
+
+/* ahb_reset0_cfg fields */
+/* On sun9i all sdc-s share their ahb reset, so ignore (x) */
+#define AHB_RESET_OFFSET_MMC(x) 8
+
+/* apb1_reset_cfg fields */
+#define APB1_RESET_UART_SHIFT 16
+#define APB1_RESET_UART_MASK (0xff << APB1_RESET_UART_SHIFT)
+#define APB1_RESET_TWI_SHIFT 0
+#define APB1_RESET_TWI_MASK (0xf << APB1_RESET_TWI_SHIFT)
+
+
+#ifndef __ASSEMBLY__
+unsigned int clock_get_pll4_periph0(void);
+#endif
+
+#endif /* _SUNXI_CLOCK_SUN9I_H */
diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h
index 82b3d46..73583ed 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu.h
@@ -1,7 +1,5 @@
/*
- * (C) Copyright 2007-2011
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- * Tom Cubie <tangliang@allwinnertech.com>
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -9,146 +7,10 @@
#ifndef _SUNXI_CPU_H
#define _SUNXI_CPU_H
-#define SUNXI_SRAM_A1_BASE 0x00000000
-#define SUNXI_SRAM_A1_SIZE (16 * 1024) /* 16 kiB */
-
-#define SUNXI_SRAM_A2_BASE 0x00004000 /* 16 kiB */
-#define SUNXI_SRAM_A3_BASE 0x00008000 /* 13 kiB */
-#define SUNXI_SRAM_A4_BASE 0x0000b400 /* 3 kiB */
-#define SUNXI_SRAM_D_BASE 0x00010000 /* 4 kiB */
-#define SUNXI_SRAM_B_BASE 0x00020000 /* 64 kiB (secure) */
-
-#define SUNXI_SRAMC_BASE 0x01c00000
-#define SUNXI_DRAMC_BASE 0x01c01000
-#define SUNXI_DMA_BASE 0x01c02000
-#define SUNXI_NFC_BASE 0x01c03000
-#define SUNXI_TS_BASE 0x01c04000
-#define SUNXI_SPI0_BASE 0x01c05000
-#define SUNXI_SPI1_BASE 0x01c06000
-#define SUNXI_MS_BASE 0x01c07000
-#define SUNXI_TVD_BASE 0x01c08000
-#define SUNXI_CSI0_BASE 0x01c09000
-#define SUNXI_TVE0_BASE 0x01c0a000
-#define SUNXI_EMAC_BASE 0x01c0b000
-#define SUNXI_LCD0_BASE 0x01c0C000
-#define SUNXI_LCD1_BASE 0x01c0d000
-#define SUNXI_VE_BASE 0x01c0e000
-#define SUNXI_MMC0_BASE 0x01c0f000
-#define SUNXI_MMC1_BASE 0x01c10000
-#define SUNXI_MMC2_BASE 0x01c11000
-#define SUNXI_MMC3_BASE 0x01c12000
-#if !defined CONFIG_MACH_SUN6I && !defined CONFIG_MACH_SUN8I
-#define SUNXI_USB0_BASE 0x01c13000
-#define SUNXI_USB1_BASE 0x01c14000
-#endif
-#define SUNXI_SS_BASE 0x01c15000
-#define SUNXI_HDMI_BASE 0x01c16000
-#define SUNXI_SPI2_BASE 0x01c17000
-#define SUNXI_SATA_BASE 0x01c18000
-#if !defined CONFIG_MACH_SUN6I && !defined CONFIG_MACH_SUN8I
-#define SUNXI_PATA_BASE 0x01c19000
-#define SUNXI_ACE_BASE 0x01c1a000
-#define SUNXI_TVE1_BASE 0x01c1b000
-#define SUNXI_USB2_BASE 0x01c1c000
+#if defined(CONFIG_MACH_SUN9I)
+#include <asm/arch/cpu_sun9i.h>
#else
-#define SUNXI_USB0_BASE 0x01c19000
-#define SUNXI_USB1_BASE 0x01c1a000
-#define SUNXI_USB2_BASE 0x01c1b000
+#include <asm/arch/cpu_sun4i.h>
#endif
-#define SUNXI_CSI1_BASE 0x01c1d000
-#define SUNXI_TZASC_BASE 0x01c1e000
-#define SUNXI_SPI3_BASE 0x01c1f000
-
-#define SUNXI_CCM_BASE 0x01c20000
-#define SUNXI_INTC_BASE 0x01c20400
-#define SUNXI_PIO_BASE 0x01c20800
-#define SUNXI_TIMER_BASE 0x01c20c00
-#define SUNXI_SPDIF_BASE 0x01c21000
-#define SUNXI_AC97_BASE 0x01c21400
-#define SUNXI_IR0_BASE 0x01c21800
-#define SUNXI_IR1_BASE 0x01c21c00
-
-#define SUNXI_IIS_BASE 0x01c22400
-#define SUNXI_LRADC_BASE 0x01c22800
-#define SUNXI_AD_DA_BASE 0x01c22c00
-#define SUNXI_KEYPAD_BASE 0x01c23000
-#define SUNXI_TZPC_BASE 0x01c23400
-#define SUNXI_SID_BASE 0x01c23800
-#define SUNXI_SJTAG_BASE 0x01c23c00
-
-#define SUNXI_TP_BASE 0x01c25000
-#define SUNXI_PMU_BASE 0x01c25400
-#define SUN7I_CPUCFG_BASE 0x01c25c00
-
-#define SUNXI_UART0_BASE 0x01c28000
-#define SUNXI_UART1_BASE 0x01c28400
-#define SUNXI_UART2_BASE 0x01c28800
-#define SUNXI_UART3_BASE 0x01c28c00
-#define SUNXI_UART4_BASE 0x01c29000
-#define SUNXI_UART5_BASE 0x01c29400
-#define SUNXI_UART6_BASE 0x01c29800
-#define SUNXI_UART7_BASE 0x01c29c00
-#define SUNXI_PS2_0_BASE 0x01c2a000
-#define SUNXI_PS2_1_BASE 0x01c2a400
-
-#define SUNXI_TWI0_BASE 0x01c2ac00
-#define SUNXI_TWI1_BASE 0x01c2b000
-#define SUNXI_TWI2_BASE 0x01c2b400
-
-#define SUNXI_CAN_BASE 0x01c2bc00
-
-#define SUNXI_SCR_BASE 0x01c2c400
-
-#ifndef CONFIG_MACH_SUN6I
-#define SUNXI_GPS_BASE 0x01c30000
-#define SUNXI_MALI400_BASE 0x01c40000
-#define SUNXI_GMAC_BASE 0x01c50000
-#else
-#define SUNXI_GMAC_BASE 0x01c30000
-#endif
-
-#define SUNXI_DRAM_COM_BASE 0x01c62000
-#define SUNXI_DRAM_CTL0_BASE 0x01c63000
-#define SUNXI_DRAM_CTL1_BASE 0x01c64000
-#define SUNXI_DRAM_PHY0_BASE 0x01c65000
-#define SUNXI_DRAM_PHY1_BASE 0x01c66000
-
-/* module sram */
-#define SUNXI_SRAM_C_BASE 0x01d00000
-
-#define SUNXI_DE_FE0_BASE 0x01e00000
-#define SUNXI_DE_FE1_BASE 0x01e20000
-#define SUNXI_DE_BE0_BASE 0x01e60000
-#define SUNXI_DE_BE1_BASE 0x01e40000
-#define SUNXI_MP_BASE 0x01e80000
-#define SUNXI_AVG_BASE 0x01ea0000
-
-#define SUNXI_RTC_BASE 0x01f00000
-#define SUNXI_PRCM_BASE 0x01f01400
-#define SUN6I_CPUCFG_BASE 0x01f01c00
-#define SUNXI_R_UART_BASE 0x01f02800
-#define SUNXI_R_PIO_BASE 0x01f02c00
-#define SUN6I_P2WI_BASE 0x01f03400
-#define SUNXI_RSB_BASE 0x01f03400
-
-/* CoreSight Debug Module */
-#define SUNXI_CSDM_BASE 0x3f500000
-
-#define SUNXI_DDRII_DDRIII_BASE 0x40000000 /* 2 GiB */
-
-#define SUNXI_BROM_BASE 0xffff0000 /* 32 kiB */
-
-#define SUNXI_CPU_CFG (SUNXI_TIMER_BASE + 0x13c)
-
-/* SS bonding ids used for cpu identification */
-#define SUNXI_SS_BOND_ID_A31 4
-#define SUNXI_SS_BOND_ID_A31S 5
-
-#ifndef __ASSEMBLY__
-void sunxi_board_init(void);
-void sunxi_reset(void);
-int sunxi_get_ss_bonding_id(void);
-int sunxi_get_sid(unsigned int *sid);
-#endif /* __ASSEMBLY__ */
-#endif /* _CPU_H */
+#endif /* _SUNXI_CPU_H */
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
new file mode 100644
index 0000000..dae6069
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
@@ -0,0 +1,154 @@
+/*
+ * (C) Copyright 2007-2011
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_CPU_SUN4I_H
+#define _SUNXI_CPU_SUN4I_H
+
+#define SUNXI_SRAM_A1_BASE 0x00000000
+#define SUNXI_SRAM_A1_SIZE (16 * 1024) /* 16 kiB */
+
+#define SUNXI_SRAM_A2_BASE 0x00004000 /* 16 kiB */
+#define SUNXI_SRAM_A3_BASE 0x00008000 /* 13 kiB */
+#define SUNXI_SRAM_A4_BASE 0x0000b400 /* 3 kiB */
+#define SUNXI_SRAM_D_BASE 0x00010000 /* 4 kiB */
+#define SUNXI_SRAM_B_BASE 0x00020000 /* 64 kiB (secure) */
+
+#define SUNXI_SRAMC_BASE 0x01c00000
+#define SUNXI_DRAMC_BASE 0x01c01000
+#define SUNXI_DMA_BASE 0x01c02000
+#define SUNXI_NFC_BASE 0x01c03000
+#define SUNXI_TS_BASE 0x01c04000
+#define SUNXI_SPI0_BASE 0x01c05000
+#define SUNXI_SPI1_BASE 0x01c06000
+#define SUNXI_MS_BASE 0x01c07000
+#define SUNXI_TVD_BASE 0x01c08000
+#define SUNXI_CSI0_BASE 0x01c09000
+#define SUNXI_TVE0_BASE 0x01c0a000
+#define SUNXI_EMAC_BASE 0x01c0b000
+#define SUNXI_LCD0_BASE 0x01c0C000
+#define SUNXI_LCD1_BASE 0x01c0d000
+#define SUNXI_VE_BASE 0x01c0e000
+#define SUNXI_MMC0_BASE 0x01c0f000
+#define SUNXI_MMC1_BASE 0x01c10000
+#define SUNXI_MMC2_BASE 0x01c11000
+#define SUNXI_MMC3_BASE 0x01c12000
+#if !defined CONFIG_MACH_SUN6I && !defined CONFIG_MACH_SUN8I
+#define SUNXI_USB0_BASE 0x01c13000
+#define SUNXI_USB1_BASE 0x01c14000
+#endif
+#define SUNXI_SS_BASE 0x01c15000
+#define SUNXI_HDMI_BASE 0x01c16000
+#define SUNXI_SPI2_BASE 0x01c17000
+#define SUNXI_SATA_BASE 0x01c18000
+#if !defined CONFIG_MACH_SUN6I && !defined CONFIG_MACH_SUN8I
+#define SUNXI_PATA_BASE 0x01c19000
+#define SUNXI_ACE_BASE 0x01c1a000
+#define SUNXI_TVE1_BASE 0x01c1b000
+#define SUNXI_USB2_BASE 0x01c1c000
+#else
+#define SUNXI_USB0_BASE 0x01c19000
+#define SUNXI_USB1_BASE 0x01c1a000
+#define SUNXI_USB2_BASE 0x01c1b000
+#endif
+#define SUNXI_CSI1_BASE 0x01c1d000
+#define SUNXI_TZASC_BASE 0x01c1e000
+#define SUNXI_SPI3_BASE 0x01c1f000
+
+#define SUNXI_CCM_BASE 0x01c20000
+#define SUNXI_INTC_BASE 0x01c20400
+#define SUNXI_PIO_BASE 0x01c20800
+#define SUNXI_TIMER_BASE 0x01c20c00
+#define SUNXI_SPDIF_BASE 0x01c21000
+#define SUNXI_AC97_BASE 0x01c21400
+#define SUNXI_IR0_BASE 0x01c21800
+#define SUNXI_IR1_BASE 0x01c21c00
+
+#define SUNXI_IIS_BASE 0x01c22400
+#define SUNXI_LRADC_BASE 0x01c22800
+#define SUNXI_AD_DA_BASE 0x01c22c00
+#define SUNXI_KEYPAD_BASE 0x01c23000
+#define SUNXI_TZPC_BASE 0x01c23400
+#define SUNXI_SID_BASE 0x01c23800
+#define SUNXI_SJTAG_BASE 0x01c23c00
+
+#define SUNXI_TP_BASE 0x01c25000
+#define SUNXI_PMU_BASE 0x01c25400
+#define SUN7I_CPUCFG_BASE 0x01c25c00
+
+#define SUNXI_UART0_BASE 0x01c28000
+#define SUNXI_UART1_BASE 0x01c28400
+#define SUNXI_UART2_BASE 0x01c28800
+#define SUNXI_UART3_BASE 0x01c28c00
+#define SUNXI_UART4_BASE 0x01c29000
+#define SUNXI_UART5_BASE 0x01c29400
+#define SUNXI_UART6_BASE 0x01c29800
+#define SUNXI_UART7_BASE 0x01c29c00
+#define SUNXI_PS2_0_BASE 0x01c2a000
+#define SUNXI_PS2_1_BASE 0x01c2a400
+
+#define SUNXI_TWI0_BASE 0x01c2ac00
+#define SUNXI_TWI1_BASE 0x01c2b000
+#define SUNXI_TWI2_BASE 0x01c2b400
+
+#define SUNXI_CAN_BASE 0x01c2bc00
+
+#define SUNXI_SCR_BASE 0x01c2c400
+
+#ifndef CONFIG_MACH_SUN6I
+#define SUNXI_GPS_BASE 0x01c30000
+#define SUNXI_MALI400_BASE 0x01c40000
+#define SUNXI_GMAC_BASE 0x01c50000
+#else
+#define SUNXI_GMAC_BASE 0x01c30000
+#endif
+
+#define SUNXI_DRAM_COM_BASE 0x01c62000
+#define SUNXI_DRAM_CTL0_BASE 0x01c63000
+#define SUNXI_DRAM_CTL1_BASE 0x01c64000
+#define SUNXI_DRAM_PHY0_BASE 0x01c65000
+#define SUNXI_DRAM_PHY1_BASE 0x01c66000
+
+/* module sram */
+#define SUNXI_SRAM_C_BASE 0x01d00000
+
+#define SUNXI_DE_FE0_BASE 0x01e00000
+#define SUNXI_DE_FE1_BASE 0x01e20000
+#define SUNXI_DE_BE0_BASE 0x01e60000
+#define SUNXI_DE_BE1_BASE 0x01e40000
+#define SUNXI_MP_BASE 0x01e80000
+#define SUNXI_AVG_BASE 0x01ea0000
+
+#define SUNXI_RTC_BASE 0x01f00000
+#define SUNXI_PRCM_BASE 0x01f01400
+#define SUN6I_CPUCFG_BASE 0x01f01c00
+#define SUNXI_R_UART_BASE 0x01f02800
+#define SUNXI_R_PIO_BASE 0x01f02c00
+#define SUN6I_P2WI_BASE 0x01f03400
+#define SUNXI_RSB_BASE 0x01f03400
+
+/* CoreSight Debug Module */
+#define SUNXI_CSDM_BASE 0x3f500000
+
+#define SUNXI_DDRII_DDRIII_BASE 0x40000000 /* 2 GiB */
+
+#define SUNXI_BROM_BASE 0xffff0000 /* 32 kiB */
+
+#define SUNXI_CPU_CFG (SUNXI_TIMER_BASE + 0x13c)
+
+/* SS bonding ids used for cpu identification */
+#define SUNXI_SS_BOND_ID_A31 4
+#define SUNXI_SS_BOND_ID_A31S 5
+
+#ifndef __ASSEMBLY__
+void sunxi_board_init(void);
+void sunxi_reset(void);
+int sunxi_get_ss_bonding_id(void);
+int sunxi_get_sid(unsigned int *sid);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _SUNXI_CPU_SUN4I_H */
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h
new file mode 100644
index 0000000..04889c5
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h
@@ -0,0 +1,109 @@
+/*
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ * (C) Copyright 2007-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Jerry Wang <wangflord@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_CPU_SUN9I_H
+#define _SUNXI_CPU_SUN9I_H
+
+#define REGS_AHB0_BASE 0x01C00000
+#define REGS_AHB1_BASE 0x00800000
+#define REGS_AHB2_BASE 0x03000000
+#define REGS_APB0_BASE 0x06000000
+#define REGS_APB1_BASE 0x07000000
+#define REGS_RCPUS_BASE 0x08000000
+
+#define SUNXI_SRAM_D_BASE 0x08100000
+
+/* AHB0 Module */
+#define SUNXI_NFC_BASE (REGS_AHB0_BASE + 0x3000)
+#define SUNXI_TSC_BASE (REGS_AHB0_BASE + 0x4000)
+
+#define SUNXI_MMC0_BASE (REGS_AHB0_BASE + 0x0f000)
+#define SUNXI_MMC1_BASE (REGS_AHB0_BASE + 0x10000)
+#define SUNXI_MMC2_BASE (REGS_AHB0_BASE + 0x11000)
+#define SUNXI_MMC3_BASE (REGS_AHB0_BASE + 0x12000)
+#define SUNXI_MMC_COMMON_BASE (REGS_AHB0_BASE + 0x13000)
+
+#define SUNXI_SPI0_BASE (REGS_AHB0_BASE + 0x1A000)
+#define SUNXI_SPI1_BASE (REGS_AHB0_BASE + 0x1B000)
+#define SUNXI_SPI2_BASE (REGS_AHB0_BASE + 0x1C000)
+#define SUNXI_SPI3_BASE (REGS_AHB0_BASE + 0x1D000)
+
+#define SUNXI_GIC400_BASE (REGS_AHB0_BASE + 0x40000)
+#define SUNXI_ARMA9_GIC_BASE (REGS_AHB0_BASE + 0x41000)
+#define SUNXI_ARMA9_CPUIF_BASE (REGS_AHB0_BASE + 0x42000)
+
+/* AHB1 Module */
+#define SUNXI_DMA_BASE (REGS_AHB1_BASE + 0x002000)
+#define SUNXI_USBOTG_BASE (REGS_AHB1_BASE + 0x100000)
+#define SUNXI_USBEHCI0_BASE (REGS_AHB1_BASE + 0x200000)
+#define SUNXI_USBEHCI1_BASE (REGS_AHB1_BASE + 0x201000)
+#define SUNXI_USBEHCI2_BASE (REGS_AHB1_BASE + 0x202000)
+
+/* AHB2 Module */
+#define SUNXI_DE_SYS_BASE (REGS_AHB2_BASE + 0x000000)
+#define SUNXI_DISP_SYS_BASE (REGS_AHB2_BASE + 0x010000)
+#define SUNXI_DE_FE0_BASE (REGS_AHB2_BASE + 0x100000)
+#define SUNXI_DE_FE1_BASE (REGS_AHB2_BASE + 0x140000)
+#define SUNXI_DE_FE2_BASE (REGS_AHB2_BASE + 0x180000)
+
+#define SUNXI_DE_BE0_BASE (REGS_AHB2_BASE + 0x200000)
+#define SUNXI_DE_BE1_BASE (REGS_AHB2_BASE + 0x240000)
+#define SUNXI_DE_BE2_BASE (REGS_AHB2_BASE + 0x280000)
+
+#define SUNXI_DE_DEU0_BASE (REGS_AHB2_BASE + 0x300000)
+#define SUNXI_DE_DEU1_BASE (REGS_AHB2_BASE + 0x340000)
+#define SUNXI_DE_DRC0_BASE (REGS_AHB2_BASE + 0x400000)
+#define SUNXI_DE_DRC1_BASE (REGS_AHB2_BASE + 0x440000)
+
+#define SUNXI_LCD0_BASE (REGS_AHB2_BASE + 0xC00000)
+#define SUNXI_LCD1_BASE (REGS_AHB2_BASE + 0xC10000)
+#define SUNXI_LCD2_BASE (REGS_AHB2_BASE + 0xC20000)
+#define SUNXI_MIPI_DSI0_BASE (REGS_AHB2_BASE + 0xC40000)
+/* Also seen as SUNXI_MIPI_DSI0_DPHY_BASE 0x01ca1000 */
+#define SUNXI_MIPI_DSI0_DPHY_BASE (REGS_AHB2_BASE + 0xC40100)
+#define SUNXI_HDMI_BASE (REGS_AHB2_BASE + 0xD00000)
+
+/* APB0 Module */
+#define SUNXI_CCM_BASE (REGS_APB0_BASE + 0x0000)
+#define SUNXI_CCMMODULE_BASE (REGS_APB0_BASE + 0x0400)
+#define SUNXI_PIO_BASE (REGS_APB0_BASE + 0x0800)
+#define SUNXI_TIMER_BASE (REGS_APB0_BASE + 0x0C00)
+#define SUNXI_PWM_BASE (REGS_APB0_BASE + 0x1400)
+#define SUNXI_LRADC_BASE (REGS_APB0_BASE + 0x1800)
+
+/* APB1 Module */
+#define SUNXI_UART0_BASE (REGS_APB1_BASE + 0x0000)
+#define SUNXI_UART1_BASE (REGS_APB1_BASE + 0x0400)
+#define SUNXI_UART2_BASE (REGS_APB1_BASE + 0x0800)
+#define SUNXI_UART3_BASE (REGS_APB1_BASE + 0x0C00)
+#define SUNXI_UART4_BASE (REGS_APB1_BASE + 0x1000)
+#define SUNXI_UART5_BASE (REGS_APB1_BASE + 0x1400)
+#define SUNXI_TWI0_BASE (REGS_APB1_BASE + 0x2800)
+#define SUNXI_TWI1_BASE (REGS_APB1_BASE + 0x2C00)
+#define SUNXI_TWI2_BASE (REGS_APB1_BASE + 0x3000)
+#define SUNXI_TWI3_BASE (REGS_APB1_BASE + 0x3400)
+#define SUNXI_TWI4_BASE (REGS_APB1_BASE + 0x3800)
+
+/* RCPUS Module */
+#define SUNXI_PRCM_BASE (REGS_RCPUS_BASE + 0x1400)
+#define SUNXI_R_UART_BASE (REGS_RCPUS_BASE + 0x2800)
+#define SUNXI_R_PIO_BASE (REGS_RCPUS_BASE + 0x2c00)
+#define SUNXI_RSB_BASE (REGS_RCPUS_BASE + 0x3400)
+
+/* Misc. */
+#define SUNXI_BROM_BASE 0xFFFF0000 /* 32K */
+#define SUNXI_CPU_CFG (SUNXI_TIMER_BASE + 0x13c)
+
+#ifndef __ASSEMBLY__
+void sunxi_board_init(void);
+void sunxi_reset(void);
+int sunxi_get_sid(unsigned int *sid);
+#endif
+
+#endif /* _SUNXI_CPU_SUN9I_H */
diff --git a/arch/arm/include/asm/arch-sunxi/display.h b/arch/arm/include/asm/arch-sunxi/display.h
index 2ac8a87..5e94253 100644
--- a/arch/arm/include/asm/arch-sunxi/display.h
+++ b/arch/arm/include/asm/arch-sunxi/display.h
@@ -9,6 +9,107 @@
#ifndef _SUNXI_DISPLAY_H
#define _SUNXI_DISPLAY_H
+struct sunxi_de_fe_reg {
+ u32 enable; /* 0x000 */
+ u32 frame_ctrl; /* 0x004 */
+ u32 bypass; /* 0x008 */
+ u32 algorithm_sel; /* 0x00c */
+ u32 line_int_ctrl; /* 0x010 */
+ u8 res0[0x0c]; /* 0x014 */
+ u32 ch0_addr; /* 0x020 */
+ u32 ch1_addr; /* 0x024 */
+ u32 ch2_addr; /* 0x028 */
+ u32 field_sequence; /* 0x02c */
+ u32 ch0_offset; /* 0x030 */
+ u32 ch1_offset; /* 0x034 */
+ u32 ch2_offset; /* 0x038 */
+ u8 res1[0x04]; /* 0x03c */
+ u32 ch0_stride; /* 0x040 */
+ u32 ch1_stride; /* 0x044 */
+ u32 ch2_stride; /* 0x048 */
+ u32 input_fmt; /* 0x04c */
+ u32 ch3_addr; /* 0x050 */
+ u32 ch4_addr; /* 0x054 */
+ u32 ch5_addr; /* 0x058 */
+ u32 output_fmt; /* 0x05c */
+ u32 int_enable; /* 0x060 */
+ u32 int_status; /* 0x064 */
+ u32 status; /* 0x068 */
+ u8 res2[0x04]; /* 0x06c */
+ u32 csc_coef00; /* 0x070 */
+ u32 csc_coef01; /* 0x074 */
+ u32 csc_coef02; /* 0x078 */
+ u32 csc_coef03; /* 0x07c */
+ u32 csc_coef10; /* 0x080 */
+ u32 csc_coef11; /* 0x084 */
+ u32 csc_coef12; /* 0x088 */
+ u32 csc_coef13; /* 0x08c */
+ u32 csc_coef20; /* 0x090 */
+ u32 csc_coef21; /* 0x094 */
+ u32 csc_coef22; /* 0x098 */
+ u32 csc_coef23; /* 0x09c */
+ u32 deinterlace_ctrl; /* 0x0a0 */
+ u32 deinterlace_diag; /* 0x0a4 */
+ u32 deinterlace_tempdiff; /* 0x0a8 */
+ u32 deinterlace_sawtooth; /* 0x0ac */
+ u32 deinterlace_spatcomp; /* 0x0b0 */
+ u32 deinterlace_burstlen; /* 0x0b4 */
+ u32 deinterlace_preluma; /* 0x0b8 */
+ u32 deinterlace_tile_addr; /* 0x0bc */
+ u32 deinterlace_tile_stride; /* 0x0c0 */
+ u8 res3[0x0c]; /* 0x0c4 */
+ u32 wb_stride_enable; /* 0x0d0 */
+ u32 ch3_stride; /* 0x0d4 */
+ u32 ch4_stride; /* 0x0d8 */
+ u32 ch5_stride; /* 0x0dc */
+ u32 fe_3d_ctrl; /* 0x0e0 */
+ u32 fe_3d_ch0_addr; /* 0x0e4 */
+ u32 fe_3d_ch1_addr; /* 0x0e8 */
+ u32 fe_3d_ch2_addr; /* 0x0ec */
+ u32 fe_3d_ch0_offset; /* 0x0f0 */
+ u32 fe_3d_ch1_offset; /* 0x0f4 */
+ u32 fe_3d_ch2_offset; /* 0x0f8 */
+ u8 res4[0x04]; /* 0x0fc */
+ u32 ch0_insize; /* 0x100 */
+ u32 ch0_outsize; /* 0x104 */
+ u32 ch0_horzfact; /* 0x108 */
+ u32 ch0_vertfact; /* 0x10c */
+ u32 ch0_horzphase; /* 0x110 */
+ u32 ch0_vertphase0; /* 0x114 */
+ u32 ch0_vertphase1; /* 0x118 */
+ u8 res5[0x04]; /* 0x11c */
+ u32 ch0_horztapoffset0; /* 0x120 */
+ u32 ch0_horztapoffset1; /* 0x124 */
+ u32 ch0_verttapoffset; /* 0x128 */
+ u8 res6[0xd4]; /* 0x12c */
+ u32 ch1_insize; /* 0x200 */
+ u32 ch1_outsize; /* 0x204 */
+ u32 ch1_horzfact; /* 0x208 */
+ u32 ch1_vertfact; /* 0x20c */
+ u32 ch1_horzphase; /* 0x210 */
+ u32 ch1_vertphase0; /* 0x214 */
+ u32 ch1_vertphase1; /* 0x218 */
+ u8 res7[0x04]; /* 0x21c */
+ u32 ch1_horztapoffset0; /* 0x220 */
+ u32 ch1_horztapoffset1; /* 0x224 */
+ u32 ch1_verttapoffset; /* 0x228 */
+ u8 res8[0x1d4]; /* 0x22c */
+ u32 ch0_horzcoef0[32]; /* 0x400 */
+ u32 ch0_horzcoef1[32]; /* 0x480 */
+ u32 ch0_vertcoef[32]; /* 0x500 */
+ u8 res9[0x80]; /* 0x580 */
+ u32 ch1_horzcoef0[32]; /* 0x600 */
+ u32 ch1_horzcoef1[32]; /* 0x680 */
+ u32 ch1_vertcoef[32]; /* 0x700 */
+ u8 res10[0x280]; /* 0x780 */
+ u32 vpp_enable; /* 0xa00 */
+ u32 vpp_dcti; /* 0xa04 */
+ u32 vpp_lp1; /* 0xa08 */
+ u32 vpp_lp2; /* 0xa0c */
+ u32 vpp_wle; /* 0xa10 */
+ u32 vpp_ble; /* 0xa14 */
+};
+
struct sunxi_de_be_reg {
u8 res0[0x800]; /* 0x000 */
u32 mode; /* 0x800 */
@@ -210,6 +311,20 @@ struct sunxi_tve_reg {
};
/*
+ * DE-FE register constants.
+ */
+#define SUNXI_DE_FE_WIDTH(x) (((x) - 1) << 0)
+#define SUNXI_DE_FE_HEIGHT(y) (((y) - 1) << 16)
+#define SUNXI_DE_FE_FACTOR_INT(n) ((n) << 16)
+#define SUNXI_DE_FE_ENABLE_EN (1 << 0)
+#define SUNXI_DE_FE_FRAME_CTRL_REG_RDY (1 << 0)
+#define SUNXI_DE_FE_FRAME_CTRL_COEF_RDY (1 << 1)
+#define SUNXI_DE_FE_FRAME_CTRL_FRM_START (1 << 16)
+#define SUNXI_DE_FE_BYPASS_CSC_BYPASS (1 << 1)
+#define SUNXI_DE_FE_INPUT_FMT_ARGB8888 0x00000151
+#define SUNXI_DE_FE_OUTPUT_FMT_ARGB8888 0x00000002
+
+/*
* DE-BE register constants.
*/
#define SUNXI_DE_BE_WIDTH(x) (((x) - 1) << 0)
@@ -219,6 +334,7 @@ struct sunxi_tve_reg {
#define SUNXI_DE_BE_MODE_LAYER0_ENABLE (1 << 8)
#define SUNXI_DE_BE_LAYER_STRIDE(x) ((x) << 5)
#define SUNXI_DE_BE_REG_CTRL_LOAD_REGS (1 << 0)
+#define SUNXI_DE_BE_LAYER_ATTR0_SRC_FE0 0x00000002
#define SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888 (0x09 << 8)
/*
@@ -249,9 +365,7 @@ struct sunxi_tve_reg {
#define SUNXI_LCDC_TCON0_TIMING_V_TOTAL(n) (((n) * 2) << 16)
#define SUNXI_LCDC_TCON0_LVDS_INTF_BITWIDTH(n) ((n) << 26)
#define SUNXI_LCDC_TCON0_LVDS_INTF_ENABLE (1 << 31)
-#define SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE0 (0 << 28)
-#define SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE60 (1 << 28)
-#define SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE120 (2 << 28)
+#define SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE(x) ((x) << 28)
#define SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(n) (((n) & 0x1f) << 4)
#define SUNXI_LCDC_TCON1_CTRL_ENABLE (1 << 31)
#define SUNXI_LCDC_TCON1_TIMING_H_BP(n) (((n) - 1) << 0)
diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun4i.h b/arch/arm/include/asm/arch-sunxi/dram_sun4i.h
index 6c1ec5b..40c385a 100644
--- a/arch/arm/include/asm/arch-sunxi/dram_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/dram_sun4i.h
@@ -76,7 +76,7 @@ struct dram_para {
u32 cas;
u32 zq;
u32 odt_en;
- u32 size;
+ u32 size; /* For compat with dram.c files from u-boot-sunxi, unused */
u32 tpr0;
u32 tpr1;
u32 tpr2;
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index 71cc879..f2c247d 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -45,9 +45,13 @@
*
* sun8i has 1 bank:
* PL0 - PL11
+ *
+ * sun9i has 3 banks:
+ * PL0 - PL9 | PM0 - PM15 | PN0 - PN1
*/
#define SUNXI_GPIO_L 11
#define SUNXI_GPIO_M 12
+#define SUNXI_GPIO_N 13
struct sunxi_gpio {
u32 cfg[4];
@@ -114,6 +118,7 @@ enum sunxi_gpio_number {
SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H),
SUNXI_GPIO_L_START = 352,
SUNXI_GPIO_M_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_L),
+ SUNXI_GPIO_N_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_M),
SUNXI_GPIO_AXP0_START = 1024,
};
@@ -129,6 +134,7 @@ enum sunxi_gpio_number {
#define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr))
#define SUNXI_GPL(_nr) (SUNXI_GPIO_L_START + (_nr))
#define SUNXI_GPM(_nr) (SUNXI_GPIO_M_START + (_nr))
+#define SUNXI_GPN(_nr) (SUNXI_GPIO_N_START + (_nr))
#define SUNXI_GPAXP0(_nr) (SUNXI_GPIO_AXP0_START + (_nr))
@@ -187,6 +193,9 @@ enum sunxi_gpio_number {
#define SUN8I_GPL2_R_UART_TX 2
#define SUN8I_GPL3_R_UART_RX 2
+#define SUN9I_GPN0_R_RSB_SCK 3
+#define SUN9I_GPN1_R_RSB_SDA 3
+
/* GPIO pin pull-up/down config */
#define SUNXI_GPIO_PULL_DISABLE 0
#define SUNXI_GPIO_PULL_UP 1
diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h
index 537f145..74833b5 100644
--- a/arch/arm/include/asm/arch-sunxi/mmc.h
+++ b/arch/arm/include/asm/arch-sunxi/mmc.h
@@ -43,10 +43,11 @@ struct sunxi_mmc {
u32 chda; /* 0x90 */
u32 cbda; /* 0x94 */
u32 res1[26];
-#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I)
+#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) || \
+ defined(CONFIG_MACH_SUN9I)
u32 res2[64];
#endif
- u32 fifo; /* 0x100 (0x200 on sun6i) FIFO access address */
+ u32 fifo; /* 0x100 / 0x200 FIFO access address */
};
#define SUNXI_MMC_CLK_POWERSAVE (0x1 << 17)
@@ -123,5 +124,8 @@ struct sunxi_mmc {
#define SUNXI_MMC_IDIE_TXIRQ (0x1 << 0)
#define SUNXI_MMC_IDIE_RXIRQ (0x1 << 1)
+#define SUNXI_MMC_COMMON_CLK_GATE (1 << 16)
+#define SUNXI_MMC_COMMON_RESET (1 << 18)
+
struct mmc *sunxi_mmc_init(int sdc_no);
#endif /* _SUNXI_MMC_H */
diff --git a/arch/arm/include/asm/arch-sunxi/rsb.h b/arch/arm/include/asm/arch-sunxi/rsb.h
index 95a595a..a893466 100644
--- a/arch/arm/include/asm/arch-sunxi/rsb.h
+++ b/arch/arm/include/asm/arch-sunxi/rsb.h
@@ -37,6 +37,7 @@ struct sunxi_rsb_reg {
#define RSB_STAT_TERR_INT (1 << 1)
#define RSB_STAT_LBSY_INT (1 << 2)
+#define RSB_DMCR_DEVICE_MODE_DATA 0x7c3e00
#define RSB_DMCR_DEVICE_MODE_START (1 << 31)
#define RSB_CMD_BYTE_WRITE 0x4e
@@ -46,8 +47,7 @@ struct sunxi_rsb_reg {
#define RSB_DEVADDR_RUNTIME_ADDR(x) ((x) << 16)
#define RSB_DEVADDR_DEVICE_ADDR(x) ((x) << 0)
-void rsb_init(void);
-int rsb_set_device_mode(u32 device_mode_data);
+int rsb_init(void);
int rsb_set_device_address(u16 device_addr, u16 runtime_addr);
int rsb_write(const u16 runtime_device_addr, const u8 reg_addr, u8 data);
int rsb_read(const u16 runtime_device_addr, const u8 reg_addr, u8 *data);
diff --git a/arch/arm/include/asm/arch-sunxi/usbc.h b/arch/arm/include/asm/arch-sunxi/usbc.h
index 8d20973..cb538cd 100644
--- a/arch/arm/include/asm/arch-sunxi/usbc.h
+++ b/arch/arm/include/asm/arch-sunxi/usbc.h
@@ -11,6 +11,8 @@
* SPDX-License-Identifier: GPL-2.0+
*/
+extern const struct musb_platform_ops sunxi_musb_ops;
+
void *sunxi_usbc_get_io_base(int index);
int sunxi_usbc_request_resources(int index);
int sunxi_usbc_free_resources(int index);
diff --git a/arch/arm/include/asm/arch-tegra/tegra_mmc.h b/arch/arm/include/asm/arch-tegra/tegra_mmc.h
index 84e7b55..a20bdaa 100644
--- a/arch/arm/include/asm/arch-tegra/tegra_mmc.h
+++ b/arch/arm/include/asm/arch-tegra/tegra_mmc.h
@@ -10,6 +10,7 @@
#define __TEGRA_MMC_H_
#include <fdtdec.h>
+#include <asm/gpio.h>
/* for mmc_config definition */
#include <mmc.h>
@@ -134,9 +135,9 @@ struct mmc_host {
int enabled; /* 1 to enable, 0 to disable */
int width; /* Bus Width, 1, 4 or 8 */
enum periph_id mmc_id; /* Peripheral ID: PERIPH_ID_... */
- struct fdt_gpio_state cd_gpio; /* Change Detect GPIO */
- struct fdt_gpio_state pwr_gpio; /* Power GPIO */
- struct fdt_gpio_state wp_gpio; /* Write Protect GPIO */
+ struct gpio_desc cd_gpio; /* Change Detect GPIO */
+ struct gpio_desc pwr_gpio; /* Power GPIO */
+ struct gpio_desc wp_gpio; /* Write Protect GPIO */
unsigned int version; /* SDHCI spec. version */
unsigned int clock; /* Current clock (MHz) */
struct mmc_config cfg; /* mmc configuration */
diff --git a/arch/arm/include/asm/arch-tegra20/display.h b/arch/arm/include/asm/arch-tegra20/display.h
index a04c84e..6feeda3 100644
--- a/arch/arm/include/asm/arch-tegra20/display.h
+++ b/arch/arm/include/asm/arch-tegra20/display.h
@@ -10,6 +10,7 @@
#include <asm/arch/dc.h>
#include <fdtdec.h>
+#include <asm/gpio.h>
/* This holds information about a window which can be displayed */
struct disp_ctl_win {
@@ -72,10 +73,10 @@ struct fdt_panel_config {
int pwm_channel; /* PWM channel to use for backlight */
enum lcd_cache_t cache_type;
- struct fdt_gpio_state backlight_en; /* GPIO for backlight enable */
- struct fdt_gpio_state lvds_shutdown; /* GPIO for lvds shutdown */
- struct fdt_gpio_state backlight_vdd; /* GPIO for backlight vdd */
- struct fdt_gpio_state panel_vdd; /* GPIO for panel vdd */
+ struct gpio_desc backlight_en; /* GPIO for backlight enable */
+ struct gpio_desc lvds_shutdown; /* GPIO for lvds shutdown */
+ struct gpio_desc backlight_vdd; /* GPIO for backlight vdd */
+ struct gpio_desc panel_vdd; /* GPIO for panel vdd */
/*
* Panel required timings
* Timing 1: delay between panel_vdd-rise and data-rise
diff --git a/arch/arm/include/asm/arch-uniphier/boot-device.h b/arch/arm/include/asm/arch-uniphier/boot-device.h
index 6987f57..7a10f1c 100644
--- a/arch/arm/include/asm/arch-uniphier/boot-device.h
+++ b/arch/arm/include/asm/arch-uniphier/boot-device.h
@@ -8,7 +8,7 @@
#ifndef _ASM_BOOT_DEVICE_H_
#define _ASM_BOOT_DEVICE_H_
-u32 get_boot_mode_sel(void);
+int get_boot_mode_sel(void);
struct boot_device_info {
u32 type;
diff --git a/arch/arm/include/asm/arch-uniphier/ddrphy-regs.h b/arch/arm/include/asm/arch-uniphier/ddrphy-regs.h
index 484559c..6b7d600 100644
--- a/arch/arm/include/asm/arch-uniphier/ddrphy-regs.h
+++ b/arch/arm/include/asm/arch-uniphier/ddrphy-regs.h
@@ -72,7 +72,7 @@ struct ddrphy {
u32 gtr; /* General Timing Register */
u32 rsv[3]; /* Reserved */
} dx[9];
-} __packed;
+};
#endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/arch-uniphier/sg-regs.h b/arch/arm/include/asm/arch-uniphier/sg-regs.h
index fa5e6ae..4ae67c8 100644
--- a/arch/arm/include/asm/arch-uniphier/sg-regs.h
+++ b/arch/arm/include/asm/arch-uniphier/sg-regs.h
@@ -25,22 +25,29 @@
/* Memory Configuration */
#define SG_MEMCONF (SG_CTRL_BASE | 0x0400)
-#define SG_MEMCONF_CH0_SIZE_64MB ((0x0 << 10) | (0x01 << 0))
-#define SG_MEMCONF_CH0_SIZE_128MB ((0x0 << 10) | (0x02 << 0))
-#define SG_MEMCONF_CH0_SIZE_256MB ((0x0 << 10) | (0x03 << 0))
-#define SG_MEMCONF_CH0_SIZE_512MB ((0x1 << 10) | (0x00 << 0))
-#define SG_MEMCONF_CH0_SIZE_1024MB ((0x1 << 10) | (0x01 << 0))
+#define SG_MEMCONF_CH0_SZ_64M ((0x0 << 10) | (0x01 << 0))
+#define SG_MEMCONF_CH0_SZ_128M ((0x0 << 10) | (0x02 << 0))
+#define SG_MEMCONF_CH0_SZ_256M ((0x0 << 10) | (0x03 << 0))
+#define SG_MEMCONF_CH0_SZ_512M ((0x1 << 10) | (0x00 << 0))
+#define SG_MEMCONF_CH0_SZ_1G ((0x1 << 10) | (0x01 << 0))
#define SG_MEMCONF_CH0_NUM_1 (0x1 << 8)
#define SG_MEMCONF_CH0_NUM_2 (0x0 << 8)
-#define SG_MEMCONF_CH1_SIZE_64MB ((0x0 << 11) | (0x01 << 2))
-#define SG_MEMCONF_CH1_SIZE_128MB ((0x0 << 11) | (0x02 << 2))
-#define SG_MEMCONF_CH1_SIZE_256MB ((0x0 << 11) | (0x03 << 2))
-#define SG_MEMCONF_CH1_SIZE_512MB ((0x1 << 11) | (0x00 << 2))
-#define SG_MEMCONF_CH1_SIZE_1024MB ((0x1 << 11) | (0x01 << 2))
+#define SG_MEMCONF_CH1_SZ_64M ((0x0 << 11) | (0x01 << 2))
+#define SG_MEMCONF_CH1_SZ_128M ((0x0 << 11) | (0x02 << 2))
+#define SG_MEMCONF_CH1_SZ_256M ((0x0 << 11) | (0x03 << 2))
+#define SG_MEMCONF_CH1_SZ_512M ((0x1 << 11) | (0x00 << 2))
+#define SG_MEMCONF_CH1_SZ_1G ((0x1 << 11) | (0x01 << 2))
#define SG_MEMCONF_CH1_NUM_1 (0x1 << 9)
#define SG_MEMCONF_CH1_NUM_2 (0x0 << 9)
+#define SG_MEMCONF_CH2_SZ_64M ((0x0 << 26) | (0x01 << 16))
+#define SG_MEMCONF_CH2_SZ_128M ((0x0 << 26) | (0x02 << 16))
+#define SG_MEMCONF_CH2_SZ_256M ((0x0 << 26) | (0x03 << 16))
+#define SG_MEMCONF_CH2_SZ_512M ((0x1 << 26) | (0x00 << 16))
+#define SG_MEMCONF_CH2_NUM_1 (0x1 << 24)
+#define SG_MEMCONF_CH2_NUM_2 (0x0 << 24)
+
#define SG_MEMCONF_SPARSEMEM (0x1 << 4)
/* Pin Control */
@@ -101,6 +108,7 @@
#else
#include <linux/types.h>
+#include <linux/sizes.h>
#include <asm/io.h>
static inline void sg_set_pinsel(int n, int value)
@@ -111,24 +119,24 @@ static inline void sg_set_pinsel(int n, int value)
static inline u32 sg_memconf_val_ch0(unsigned long size, int num)
{
- int size_mb = (size >> 20) / num;
+ int size_mb = size / num;
u32 ret;
switch (size_mb) {
- case 64:
- ret = SG_MEMCONF_CH0_SIZE_64MB;
+ case SZ_64M:
+ ret = SG_MEMCONF_CH0_SZ_64M;
break;
- case 128:
- ret = SG_MEMCONF_CH0_SIZE_128MB;
+ case SZ_128M:
+ ret = SG_MEMCONF_CH0_SZ_128M;
break;
- case 256:
- ret = SG_MEMCONF_CH0_SIZE_256MB;
+ case SZ_256M:
+ ret = SG_MEMCONF_CH0_SZ_256M;
break;
- case 512:
- ret = SG_MEMCONF_CH0_SIZE_512MB;
+ case SZ_512M:
+ ret = SG_MEMCONF_CH0_SZ_512M;
break;
- case 1024:
- ret = SG_MEMCONF_CH0_SIZE_1024MB;
+ case SZ_1G:
+ ret = SG_MEMCONF_CH0_SZ_1G;
break;
default:
BUG();
@@ -151,24 +159,24 @@ static inline u32 sg_memconf_val_ch0(unsigned long size, int num)
static inline u32 sg_memconf_val_ch1(unsigned long size, int num)
{
- int size_mb = (size >> 20) / num;
+ int size_mb = size / num;
u32 ret;
switch (size_mb) {
- case 64:
- ret = SG_MEMCONF_CH1_SIZE_64MB;
+ case SZ_64M:
+ ret = SG_MEMCONF_CH1_SZ_64M;
break;
- case 128:
- ret = SG_MEMCONF_CH1_SIZE_128MB;
+ case SZ_128M:
+ ret = SG_MEMCONF_CH1_SZ_128M;
break;
- case 256:
- ret = SG_MEMCONF_CH1_SIZE_256MB;
+ case SZ_256M:
+ ret = SG_MEMCONF_CH1_SZ_256M;
break;
- case 512:
- ret = SG_MEMCONF_CH1_SIZE_512MB;
+ case SZ_512M:
+ ret = SG_MEMCONF_CH1_SZ_512M;
break;
- case 1024:
- ret = SG_MEMCONF_CH1_SIZE_1024MB;
+ case SZ_1G:
+ ret = SG_MEMCONF_CH1_SZ_1G;
break;
default:
BUG();
@@ -188,6 +196,43 @@ static inline u32 sg_memconf_val_ch1(unsigned long size, int num)
}
return ret;
}
+
+static inline u32 sg_memconf_val_ch2(unsigned long size, int num)
+{
+ int size_mb = size / num;
+ u32 ret;
+
+ switch (size_mb) {
+ case SZ_64M:
+ ret = SG_MEMCONF_CH2_SZ_64M;
+ break;
+ case SZ_128M:
+ ret = SG_MEMCONF_CH2_SZ_128M;
+ break;
+ case SZ_256M:
+ ret = SG_MEMCONF_CH2_SZ_256M;
+ break;
+ case SZ_512M:
+ ret = SG_MEMCONF_CH2_SZ_512M;
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ switch (num) {
+ case 1:
+ ret |= SG_MEMCONF_CH2_NUM_1;
+ break;
+ case 2:
+ ret |= SG_MEMCONF_CH2_NUM_2;
+ break;
+ default:
+ BUG();
+ break;
+ }
+ return ret;
+}
#endif /* __ASSEMBLY__ */
#endif /* ARCH_SG_REGS_H */
diff --git a/arch/arm/include/asm/arch-zynq/gpio.h b/arch/arm/include/asm/arch-zynq/gpio.h
index 2dbba75..a26ae87 100644
--- a/arch/arm/include/asm/arch-zynq/gpio.h
+++ b/arch/arm/include/asm/arch-zynq/gpio.h
@@ -7,19 +7,4 @@
#ifndef _ZYNQ_GPIO_H
#define _ZYNQ_GPIO_H
-inline int gpio_get_value(unsigned gpio)
-{
- return 0;
-}
-
-inline int gpio_set_value(unsigned gpio, int val)
-{
- return 0;
-}
-
-inline int gpio_request(unsigned gpio, const char *label)
-{
- return 0;
-}
-
#endif /* _ZYNQ_GPIO_H */
diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h
index 2aede0c..e2e0b73 100644
--- a/arch/arm/include/asm/arch-zynq/hardware.h
+++ b/arch/arm/include/asm/arch-zynq/hardware.h
@@ -21,6 +21,9 @@
#define ZYNQ_I2C_BASEADDR1 0xE0005000
#define ZYNQ_SPI_BASEADDR0 0xE0006000
#define ZYNQ_SPI_BASEADDR1 0xE0007000
+#define ZYNQ_QSPI_BASEADDR 0xE000D000
+#define ZYNQ_SMC_BASEADDR 0xE000E000
+#define ZYNQ_NAND_BASEADDR 0xE1000000
#define ZYNQ_DDRC_BASEADDR 0xF8006000
#define ZYNQ_EFUSE_BASEADDR 0xF800D000
#define ZYNQ_USB_BASEADDR0 0xE0002000
@@ -28,7 +31,9 @@
/* Bootmode setting values */
#define ZYNQ_BM_MASK 0x7
+#define ZYNQ_BM_QSPI 0x1
#define ZYNQ_BM_NOR 0x2
+#define ZYNQ_BM_NAND 0x4
#define ZYNQ_BM_SD 0x5
#define ZYNQ_BM_JTAG 0x0
diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h
index 89c47f3..9d50e24 100644
--- a/arch/arm/include/asm/arch-zynq/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynq/sys_proto.h
@@ -20,7 +20,7 @@ extern void zynq_ddrc_init(void);
extern unsigned int zynq_get_silicon_version(void);
/* Driver extern functions */
-extern int zynq_sdhci_init(u32 regbase);
+extern int zynq_sdhci_init(phys_addr_t regbase);
extern int zynq_sdhci_of_init(const void *blob);
extern void ps7_init(void);
diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h
index f97f3dd..414042d 100644
--- a/arch/arm/include/asm/u-boot-arm.h
+++ b/arch/arm/include/asm/u-boot-arm.h
@@ -36,7 +36,6 @@ int arch_early_init_r(void);
/* board/.../... */
int board_init(void);
-int dram_init (void);
void dram_init_banksize (void);
/* cpu/.../interrupt.c */
diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c
index 9cedeac..74cfde6 100644
--- a/arch/arm/lib/cache.c
+++ b/arch/arm/lib/cache.c
@@ -25,10 +25,12 @@ __weak void flush_cache(unsigned long start, unsigned long size)
#endif /* CONFIG_CPU_ARM1136 */
#ifdef CONFIG_CPU_ARM926EJS
+#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
/* test and clean, page 2-23 of arm926ejs manual */
asm("0: mrc p15, 0, r15, c7, c10, 3\n\t" "bne 0b\n" : : : "memory");
/* disable write buffer as well (page 2-22) */
asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
+#endif
#endif /* CONFIG_CPU_ARM926EJS */
return;
}
diff --git a/arch/arm/lib/spl.c b/arch/arm/lib/spl.c
index dfcc596..c41850a 100644
--- a/arch/arm/lib/spl.c
+++ b/arch/arm/lib/spl.c
@@ -15,6 +15,11 @@
/* Pointer to as well as the global data structure for SPL */
DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * WARNING: This is going away very soon. Don't use it and don't submit
+ * pafches that rely on it. The global_data area is set up in crt0.S.
+ */
gd_t gdata __attribute__ ((section(".data")));
/*
@@ -28,7 +33,7 @@ void __weak board_init_f(ulong dummy)
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
- /* Set global data pointer. */
+ /* TODO: Remove settings of the global data pointer here */
gd = &gdata;
board_init_r(NULL, 0);
diff --git a/arch/arm/mvebu-common/Makefile b/arch/arm/mvebu-common/Makefile
index 9dcab69..de243fe 100644
--- a/arch/arm/mvebu-common/Makefile
+++ b/arch/arm/mvebu-common/Makefile
@@ -10,3 +10,5 @@ obj-y = dram.o
obj-y += gpio.o
obj-$(CONFIG_ARMADA_XP) += mbus.o
obj-y += timer.o
+
+obj-y += serdes/
diff --git a/arch/arm/mvebu-common/serdes/Makefile b/arch/arm/mvebu-common/serdes/Makefile
new file mode 100644
index 0000000..a380fee
--- /dev/null
+++ b/arch/arm/mvebu-common/serdes/Makefile
@@ -0,0 +1,6 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-$(CONFIG_SPL_BUILD) = high_speed_env_lib.o
+obj-$(CONFIG_SPL_BUILD) += high_speed_env_spec.o
diff --git a/arch/arm/mvebu-common/serdes/board_env_spec.h b/arch/arm/mvebu-common/serdes/board_env_spec.h
new file mode 100644
index 0000000..36e0ed8
--- /dev/null
+++ b/arch/arm/mvebu-common/serdes/board_env_spec.h
@@ -0,0 +1,262 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __BOARD_ENV_SPEC
+#define __BOARD_ENV_SPEC
+
+/* Board specific configuration */
+
+/* KW40 */
+#define MV_6710_DEV_ID 0x6710
+
+#define MV_6710_Z1_REV 0x0
+#define MV_6710_Z1_ID ((MV_6710_DEV_ID << 16) | MV_6710_Z1_REV)
+#define MV_6710_Z1_NAME "MV6710 Z1"
+
+/* Armada XP Family */
+#define MV_78130_DEV_ID 0x7813
+#define MV_78160_DEV_ID 0x7816
+#define MV_78230_DEV_ID 0x7823
+#define MV_78260_DEV_ID 0x7826
+#define MV_78460_DEV_ID 0x7846
+#define MV_78000_DEV_ID 0x7888
+
+#define MV_FPGA_DEV_ID 0x2107
+
+#define MV_78XX0_Z1_REV 0x0
+
+/* boards ID numbers */
+#define BOARD_ID_BASE 0x0
+
+/* New board ID numbers */
+#define DB_88F78XX0_BP_ID (BOARD_ID_BASE)
+#define RD_78460_SERVER_ID (DB_88F78XX0_BP_ID + 1)
+#define DB_78X60_PCAC_ID (RD_78460_SERVER_ID + 1)
+#define FPGA_88F78XX0_ID (DB_78X60_PCAC_ID + 1)
+#define DB_88F78XX0_BP_REV2_ID (FPGA_88F78XX0_ID + 1)
+#define RD_78460_NAS_ID (DB_88F78XX0_BP_REV2_ID + 1)
+#define DB_78X60_AMC_ID (RD_78460_NAS_ID + 1)
+#define DB_78X60_PCAC_REV2_ID (DB_78X60_AMC_ID + 1)
+#define RD_78460_SERVER_REV2_ID (DB_78X60_PCAC_REV2_ID + 1)
+#define DB_784MP_GP_ID (RD_78460_SERVER_REV2_ID + 1)
+#define RD_78460_CUSTOMER_ID (DB_784MP_GP_ID + 1)
+#define MV_MAX_BOARD_ID (RD_78460_CUSTOMER_ID + 1)
+#define INVALID_BAORD_ID 0xFFFFFFFF
+
+/* Sample at Reset */
+#define MPP_SAMPLE_AT_RESET(id) (0x18230 + (id * 4))
+
+/* BIOS Modes related defines */
+
+#define SAR0_BOOTWIDTH_OFFSET 3
+#define SAR0_BOOTWIDTH_MASK (0x3 << SAR0_BOOTWIDTH_OFFSET)
+#define SAR0_BOOTSRC_OFFSET 5
+#define SAR0_BOOTSRC_MASK (0xF << SAR0_BOOTSRC_OFFSET)
+
+#define SAR0_L2_SIZE_OFFSET 19
+#define SAR0_L2_SIZE_MASK (0x3 << SAR0_L2_SIZE_OFFSET)
+#define SAR0_CPU_FREQ_OFFSET 21
+#define SAR0_CPU_FREQ_MASK (0x7 << SAR0_CPU_FREQ_OFFSET)
+#define SAR0_FABRIC_FREQ_OFFSET 24
+#define SAR0_FABRIC_FREQ_MASK (0xF << SAR0_FABRIC_FREQ_OFFSET)
+#define SAR0_CPU0CORE_OFFSET 31
+#define SAR0_CPU0CORE_MASK (0x1 << SAR0_CPU0CORE_OFFSET)
+#define SAR1_CPU0CORE_OFFSET 0
+#define SAR1_CPU0CORE_MASK (0x1 << SAR1_CPU0CORE_OFFSET)
+
+#define PEX_CLK_100MHZ_OFFSET 2
+#define PEX_CLK_100MHZ_MASK (0x1 << PEX_CLK_100MHZ_OFFSET)
+
+#define SAR1_FABRIC_MODE_OFFSET 19
+#define SAR1_FABRIC_MODE_MASK (0x1 << SAR1_FABRIC_MODE_OFFSET)
+#define SAR1_CPU_MODE_OFFSET 20
+#define SAR1_CPU_MODE_MASK (0x1 << SAR1_CPU_MODE_OFFSET)
+
+#define SAR_CPU_FAB_GET(cpu, fab) (((cpu & 0x7) << 21) | ((fab & 0xF) << 24))
+
+
+#define CORE_AVS_CONTROL_0REG 0x18300
+#define CORE_AVS_CONTROL_2REG 0x18308
+#define CPU_AVS_CONTROL2_REG 0x20868
+#define CPU_AVS_CONTROL0_REG 0x20860
+#define GENERAL_PURPOSE_RESERVED0_REG 0x182E0
+
+#define MSAR_TCLK_OFFS 28
+#define MSAR_TCLK_MASK (0x1 << MSAR_TCLK_OFFS)
+
+
+/* Controler environment registers offsets */
+#define GEN_PURP_RES_1_REG 0x182F4
+#define GEN_PURP_RES_2_REG 0x182F8
+
+/* registers offsets */
+#define MV_GPP_REGS_OFFSET(unit) (0x18100 + ((unit) * 0x40))
+#define MPP_CONTROL_REG(id) (0x18000 + (id * 4))
+#define MV_GPP_REGS_BASE(unit) (MV_GPP_REGS_OFFSET(unit))
+#define MV_GPP_REGS_BASE_0 (MV_GPP_REGS_OFFSET_0)
+
+#define GPP_DATA_OUT_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x00)
+#define GPP_DATA_OUT_REG_0 (MV_GPP_REGS_BASE_0 + 0x00) /* Used in .S files */
+#define GPP_DATA_OUT_EN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x04)
+#define GPP_BLINK_EN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x08)
+#define GPP_DATA_IN_POL_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x0C)
+#define GPP_DATA_IN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x10)
+#define GPP_INT_CAUSE_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x14)
+#define GPP_INT_MASK_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x18)
+#define GPP_INT_LVL_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x1C)
+#define GPP_OUT_SET_REG(grp) (0x18130 + ((grp) * 0x40))
+#define GPP_64_66_DATA_OUT_SET_REG 0x181A4
+#define GPP_OUT_CLEAR_REG(grp) (0x18134 + ((grp) * 0x40))
+#define GPP_64_66_DATA_OUT_CLEAR_REG 0x181B0
+#define GPP_FUNC_SELECT_REG (MV_GPP_REGS_BASE(0) + 0x40)
+
+#define MV_GPP66 (1 << 2)
+
+/* Relevant for MV78XX0 */
+#define GPP_DATA_OUT_SET_REG (MV_GPP_REGS_BASE(0) + 0x20)
+#define GPP_DATA_OUT_CLEAR_REG (MV_GPP_REGS_BASE(0) + 0x24)
+
+/* This define describes the maximum number of supported PEX Interfaces */
+#define MV_PEX_MAX_IF 10
+#define MV_PEX_MAX_UNIT 4
+
+#define MV_SERDES_NUM_TO_PEX_NUM(num) ((num < 8) ? (num) : (8 + (num / 12)))
+
+#define PEX_PHY_ACCESS_REG(unit) (0x40000 + ((unit) % 2 * 0x40000) + \
+ ((unit)/2 * 0x2000) + 0x1B00)
+
+#define SATA_BASE_REG(port) (0xA2000 + (port)*0x2000)
+
+#define SATA_PWR_PLL_CTRL_REG(port) (SATA_BASE_REG(port) + 0x804)
+#define SATA_DIG_LP_ENA_REG(port) (SATA_BASE_REG(port) + 0x88C)
+#define SATA_REF_CLK_SEL_REG(port) (SATA_BASE_REG(port) + 0x918)
+#define SATA_COMPHY_CTRL_REG(port) (SATA_BASE_REG(port) + 0x920)
+#define SATA_LP_PHY_EXT_CTRL_REG(port) (SATA_BASE_REG(port) + 0x058)
+#define SATA_LP_PHY_EXT_STAT_REG(port) (SATA_BASE_REG(port) + 0x05C)
+#define SATA_IMP_TX_SSC_CTRL_REG(port) (SATA_BASE_REG(port) + 0x810)
+#define SATA_GEN_1_SET_0_REG(port) (SATA_BASE_REG(port) + 0x834)
+#define SATA_GEN_1_SET_1_REG(port) (SATA_BASE_REG(port) + 0x838)
+#define SATA_GEN_2_SET_0_REG(port) (SATA_BASE_REG(port) + 0x83C)
+#define SATA_GEN_2_SET_1_REG(port) (SATA_BASE_REG(port) + 0x840)
+
+#define MV_ETH_BASE_ADDR (0x72000)
+#define MV_ETH_REGS_OFFSET(port) (MV_ETH_BASE_ADDR - ((port) / 2) * \
+ 0x40000 + ((port) % 2) * 0x4000)
+#define MV_ETH_REGS_BASE(port) MV_ETH_REGS_OFFSET(port)
+
+
+#define SGMII_PWR_PLL_CTRL_REG(port) (MV_ETH_REGS_BASE(port) + 0xE04)
+#define SGMII_DIG_LP_ENA_REG(port) (MV_ETH_REGS_BASE(port) + 0xE8C)
+#define SGMII_REF_CLK_SEL_REG(port) (MV_ETH_REGS_BASE(port) + 0xF18)
+#define SGMII_SERDES_CFG_REG(port) (MV_ETH_REGS_BASE(port) + 0x4A0)
+#define SGMII_SERDES_STAT_REG(port) (MV_ETH_REGS_BASE(port) + 0x4A4)
+#define SGMII_COMPHY_CTRL_REG(port) (MV_ETH_REGS_BASE(port) + 0xF20)
+#define QSGMII_GEN_1_SETTING_REG(port) (MV_ETH_REGS_BASE(port) + 0xE38)
+#define QSGMII_SERDES_CFG_REG(port) (MV_ETH_REGS_BASE(port) + 0x4a0)
+
+#define SERDES_LINE_MUX_REG_0_7 0x18270
+#define SERDES_LINE_MUX_REG_8_15 0x18274
+#define QSGMII_CONTROL_1_REG 0x18404
+
+/* SOC_CTRL_REG fields */
+#define SCR_PEX_ENA_OFFS(pex) ((pex) & 0x3)
+#define SCR_PEX_ENA_MASK(pex) (1 << pex)
+
+#define PCIE0_QUADX1_EN (1<<7)
+#define PCIE1_QUADX1_EN (1<<8)
+
+#define SCR_PEX_4BY1_OFFS(pex) ((pex) + 7)
+#define SCR_PEX_4BY1_MASK(pex) (1 << SCR_PEX_4BY1_OFFS(pex))
+
+#define PCIE1_CLK_OUT_EN_OFF 5
+#define PCIE1_CLK_OUT_EN_MASK (1 << PCIE1_CLK_OUT_EN_OFF)
+
+#define PCIE0_CLK_OUT_EN_OFF 4
+#define PCIE0_CLK_OUT_EN_MASK (1 << PCIE0_CLK_OUT_EN_OFF)
+
+#define SCR_PEX0_4BY1_OFFS 7
+#define SCR_PEX0_4BY1_MASK (1 << SCR_PEX0_4BY1_OFFS)
+
+#define SCR_PEX1_4BY1_OFFS 8
+#define SCR_PEX1_4BY1_MASK (1 << SCR_PEX1_4BY1_OFFS)
+
+
+#define MV_MISC_REGS_OFFSET (0x18200)
+#define MV_MISC_REGS_BASE (MV_MISC_REGS_OFFSET)
+#define SOC_CTRL_REG (MV_MISC_REGS_BASE + 0x4)
+
+/*
+ * PCI Express Control and Status Registers
+ */
+#define MAX_PEX_DEVICES 32
+#define MAX_PEX_FUNCS 8
+#define MAX_PEX_BUSSES 256
+
+#define PXSR_PEX_BUS_NUM_OFFS 8 /* Bus Number Indication */
+#define PXSR_PEX_BUS_NUM_MASK (0xff << PXSR_PEX_BUS_NUM_OFFS)
+
+#define PXSR_PEX_DEV_NUM_OFFS 16 /* Device Number Indication */
+#define PXSR_PEX_DEV_NUM_MASK (0x1f << PXSR_PEX_DEV_NUM_OFFS)
+
+#define PXSR_DL_DOWN 0x1 /* DL_Down indication. */
+#define PXCAR_CONFIG_EN (1 << 31)
+#define PEX_STATUS_AND_COMMAND 0x004
+#define PXSAC_MABORT (1 << 29) /* Recieved Master Abort */
+
+/* PCI Express Configuration Address Register */
+
+/* PEX_CFG_ADDR_REG (PXCAR) */
+#define PXCAR_REG_NUM_OFFS 2
+#define PXCAR_REG_NUM_MAX 0x3F
+#define PXCAR_REG_NUM_MASK (PXCAR_REG_NUM_MAX << PXCAR_REG_NUM_OFFS)
+#define PXCAR_FUNC_NUM_OFFS 8
+#define PXCAR_FUNC_NUM_MAX 0x7
+#define PXCAR_FUNC_NUM_MASK (PXCAR_FUNC_NUM_MAX << PXCAR_FUNC_NUM_OFFS)
+#define PXCAR_DEVICE_NUM_OFFS 11
+#define PXCAR_DEVICE_NUM_MAX 0x1F
+#define PXCAR_DEVICE_NUM_MASK (PXCAR_DEVICE_NUM_MAX << PXCAR_DEVICE_NUM_OFFS)
+#define PXCAR_BUS_NUM_OFFS 16
+#define PXCAR_BUS_NUM_MAX 0xFF
+#define PXCAR_BUS_NUM_MASK (PXCAR_BUS_NUM_MAX << PXCAR_BUS_NUM_OFFS)
+#define PXCAR_EXT_REG_NUM_OFFS 24
+#define PXCAR_EXT_REG_NUM_MAX 0xF
+
+#define PXCAR_REAL_EXT_REG_NUM_OFFS 8
+#define PXCAR_REAL_EXT_REG_NUM_MASK (0xF << PXCAR_REAL_EXT_REG_NUM_OFFS)
+
+
+#define PEX_CAPABILITIES_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x60)
+#define PEX_LINK_CAPABILITIES_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x6C)
+#define PEX_LINK_CTRL_STATUS_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x70)
+#define PEX_LINK_CTRL_STATUS2_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x90)
+#define PEX_CTRL_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A00)
+#define PEX_STATUS_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A04)
+#define PEX_COMPLT_TMEOUT_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A10)
+#define PEX_PWR_MNG_EXT_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A18)
+#define PEX_FLOW_CTRL_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A20)
+#define PEX_DYNMC_WIDTH_MNG_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A30)
+#define PEX_ROOT_CMPLX_SSPL_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A0C)
+#define PEX_RAM_PARITY_CTRL_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A50)
+#define PEX_DBG_CTRL_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A60)
+#define PEX_DBG_STATUS_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A64)
+
+#define PXLCSR_NEG_LNK_GEN_OFFS 16 /* Negotiated Link GEN */
+#define PXLCSR_NEG_LNK_GEN_MASK (0xf << PXLCSR_NEG_LNK_GEN_OFFS)
+#define PXLCSR_NEG_LNK_GEN_1_1 (0x1 << PXLCSR_NEG_LNK_GEN_OFFS)
+#define PXLCSR_NEG_LNK_GEN_2_0 (0x2 << PXLCSR_NEG_LNK_GEN_OFFS)
+
+#define PEX_CFG_ADDR_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x18F8)
+#define PEX_CFG_DATA_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x18FC)
+#define PEX_CAUSE_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1900)
+
+#define PEX_CAPABILITY_REG 0x60
+#define PEX_DEV_CAPABILITY_REG 0x64
+#define PEX_DEV_CTRL_STAT_REG 0x68
+#define PEX_LINK_CAPABILITY_REG 0x6C
+#define PEX_LINK_CTRL_STAT_REG 0x70
+#define PEX_LINK_CTRL_STAT_2_REG 0x90
+
+#endif /* __BOARD_ENV_SPEC */
diff --git a/arch/arm/mvebu-common/serdes/high_speed_env_lib.c b/arch/arm/mvebu-common/serdes/high_speed_env_lib.c
new file mode 100644
index 0000000..702273a
--- /dev/null
+++ b/arch/arm/mvebu-common/serdes/high_speed_env_lib.c
@@ -0,0 +1,1572 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+#include "high_speed_env_spec.h"
+#include "board_env_spec.h"
+
+#define SERDES_VERION "2.1.5"
+#define ENDED_OK "High speed PHY - Ended Successfully\n"
+
+static const u8 serdes_cfg[][SERDES_LAST_UNIT] = BIN_SERDES_CFG;
+
+extern MV_BIN_SERDES_CFG *serdes_info_tbl[];
+
+extern u8 rd78460gp_twsi_dev[];
+extern u8 db88f78xx0rev2_twsi_dev[];
+
+u32 pex_cfg_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 offs);
+int pex_local_bus_num_set(u32 pex_if, u32 bus_num);
+int pex_local_dev_num_set(u32 pex_if, u32 dev_num);
+
+#define MV_BOARD_PEX_MODULE_ADDR 0x23
+#define MV_BOARD_PEX_MODULE_ID 1
+#define MV_BOARD_ETM_MODULE_ID 2
+
+#define PEX_MODULE_DETECT 1
+#define ETM_MODULE_DETECT 2
+
+#define PEX_MODE_GET(satr) ((satr & 0x6) >> 1)
+#define PEX_CAPABILITY_GET(satr) (satr & 1)
+#define MV_PEX_UNIT_TO_IF(pex_unit) ((pex_unit < 3) ? (pex_unit * 4) : 9)
+
+/* Static parametes */
+static int config_module;
+static int switch_module;
+
+/* Local function */
+static u32 board_id_get(void)
+{
+#if defined(CONFIG_DB_88F78X60)
+ return DB_88F78XX0_BP_ID;
+#elif defined(CONFIG_RD_88F78460_SERVER)
+ return RD_78460_SERVER_ID;
+#elif defined(CONFIG_RD_78460_SERVER_REV2)
+ return RD_78460_SERVER_REV2_ID;
+#elif defined(CONFIG_DB_78X60_PCAC)
+ return DB_78X60_PCAC_ID;
+#elif defined(CONFIG_DB_88F78X60_REV2)
+ return DB_88F78XX0_BP_REV2_ID;
+#elif defined(CONFIG_RD_78460_NAS)
+ return RD_78460_NAS_ID;
+#elif defined(CONFIG_DB_78X60_AMC)
+ return DB_78X60_AMC_ID;
+#elif defined(CONFIG_DB_78X60_PCAC_REV2)
+ return DB_78X60_PCAC_REV2_ID;
+#elif defined(CONFIG_DB_784MP_GP)
+ return DB_784MP_GP_ID;
+#elif defined(CONFIG_RD_78460_CUSTOMER)
+ return RD_78460_CUSTOMER_ID;
+#else
+ /*
+ * Return 0 here for custom board as this should not be used
+ * for custom boards.
+ */
+ return 0;
+#endif
+}
+
+static u8 board_sat_r_get(u8 dev_num, u8 reg)
+{
+ u8 data;
+ u8 *dev;
+ u32 board_id = board_id_get();
+ int ret;
+
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ switch (board_id) {
+ case DB_784MP_GP_ID:
+ dev = rd78460gp_twsi_dev;
+
+ break;
+ case DB_88F78XX0_BP_ID:
+ case DB_88F78XX0_BP_REV2_ID:
+ dev = db88f78xx0rev2_twsi_dev;
+ break;
+
+ case DB_78X60_PCAC_ID:
+ case FPGA_88F78XX0_ID:
+ case DB_78X60_PCAC_REV2_ID:
+ case RD_78460_SERVER_REV2_ID:
+ default:
+ return 0;
+ }
+
+ /* Read MPP module ID */
+ ret = i2c_read(dev[dev_num], 0, 1, (u8 *)&data, 1);
+ if (ret)
+ return MV_ERROR;
+
+ return data;
+}
+
+static int board_modules_scan(void)
+{
+ u8 val;
+ u32 board_id = board_id_get();
+ int ret;
+
+ /* Perform scan only for DB board */
+ if ((board_id == DB_88F78XX0_BP_ID) ||
+ (board_id == DB_88F78XX0_BP_REV2_ID)) {
+ /* reset modules flags */
+ config_module = 0;
+
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ /* SERDES module (only PEX model is supported now) */
+ ret = i2c_read(MV_BOARD_PEX_MODULE_ADDR, 0, 1, (u8 *)&val, 1);
+ if (ret)
+ return MV_ERROR;
+
+ if (val == MV_BOARD_PEX_MODULE_ID)
+ config_module = PEX_MODULE_DETECT;
+ if (val == MV_BOARD_ETM_MODULE_ID)
+ config_module = ETM_MODULE_DETECT;
+ } else if (board_id == RD_78460_NAS_ID) {
+ switch_module = 0;
+ if ((reg_read(GPP_DATA_IN_REG(2)) & MV_GPP66) == 0x0)
+ switch_module = 1;
+ }
+
+ return MV_OK;
+}
+
+u32 pex_max_unit_get(void)
+{
+ /*
+ * TODO:
+ * Right now only MV78460 is supported. Other SoC's might need
+ * a different value here.
+ */
+ return MV_PEX_MAX_UNIT;
+}
+
+u32 pex_max_if_get(void)
+{
+ /*
+ * TODO:
+ * Right now only MV78460 is supported. Other SoC's might need
+ * a different value here.
+ */
+ return MV_PEX_MAX_IF;
+}
+
+u8 board_cpu_freq_get(void)
+{
+ u32 sar;
+ u32 sar_msb;
+
+ sar = reg_read(MPP_SAMPLE_AT_RESET(0));
+ sar_msb = reg_read(MPP_SAMPLE_AT_RESET(1));
+ return ((sar_msb & 0x100000) >> 17) | ((sar & 0xe00000) >> 21);
+}
+
+__weak MV_BIN_SERDES_CFG *board_serdes_cfg_get(u8 pex_mode)
+{
+ u32 board_id;
+ u32 serdes_cfg_val = 0; /* default */
+
+ board_id = board_id_get();
+
+ switch (board_id) {
+ case DB_784MP_GP_ID:
+ serdes_cfg_val = 0;
+ break;
+ }
+
+ return &serdes_info_tbl[board_id - BOARD_ID_BASE][serdes_cfg_val];
+}
+
+u16 ctrl_model_get(void)
+{
+ /* Right now only MV78460 supported */
+ return MV_78460_DEV_ID;
+}
+
+u32 get_line_cfg(u32 line_num, MV_BIN_SERDES_CFG *info)
+{
+ if (line_num < 8)
+ return (info->line0_7 >> (line_num << 2)) & 0xF;
+ else
+ return (info->line8_15 >> ((line_num - 8) << 2)) & 0xF;
+}
+
+int serdes_phy_config(void)
+{
+ int status = MV_OK;
+ u32 line_cfg;
+ u8 line_num;
+ /* addr/value for each line @ every setup step */
+ u32 addr[16][11], val[16][11];
+ u8 pex_unit, pex_line_num;
+ u8 sgmii_port = 0;
+ u32 tmp;
+ u32 in_direct;
+ u8 max_serdes_lines;
+ MV_BIN_SERDES_CFG *info;
+ u8 satr11;
+ u8 sata_port;
+ u8 freq;
+ u8 device_rev;
+ u32 rx_high_imp_mode;
+ u16 ctrl_mode;
+ u32 board_id = board_id_get();
+ u32 pex_if;
+ u32 pex_if_num;
+
+ /*
+ * TODO:
+ * Right now we only support the MV78460 with 16 serdes lines
+ */
+ max_serdes_lines = 16;
+ if (max_serdes_lines == 0)
+ return MV_OK;
+
+ switch (board_id) {
+ case DB_78X60_AMC_ID:
+ case DB_78X60_PCAC_REV2_ID:
+ case RD_78460_CUSTOMER_ID:
+ case RD_78460_SERVER_ID:
+ case RD_78460_SERVER_REV2_ID:
+ case DB_78X60_PCAC_ID:
+ satr11 = (0x1 << 1) | 1;
+ break;
+ case FPGA_88F78XX0_ID:
+ case RD_78460_NAS_ID:
+ satr11 = (0x0 << 1) | 1;
+ break;
+ case DB_88F78XX0_BP_REV2_ID:
+ case DB_784MP_GP_ID:
+ case DB_88F78XX0_BP_ID:
+ satr11 = board_sat_r_get(1, 1);
+ if ((u8) MV_ERROR == (u8) satr11)
+ return MV_ERROR;
+ break;
+ }
+
+ board_modules_scan();
+ memset(addr, 0, sizeof(addr));
+ memset(val, 0, sizeof(val));
+
+ /* Check if DRAM is already initialized */
+ if (reg_read(REG_BOOTROM_ROUTINE_ADDR) &
+ (1 << REG_BOOTROM_ROUTINE_DRAM_INIT_OFFS)) {
+ DEBUG_INIT_S("High speed PHY - Version: ");
+ DEBUG_INIT_S(SERDES_VERION);
+ DEBUG_INIT_S(" - 2nd boot - Skip\n");
+ return MV_OK;
+ }
+ DEBUG_INIT_S("High speed PHY - Version: ");
+ DEBUG_INIT_S(SERDES_VERION);
+ DEBUG_INIT_S(" (COM-PHY-V20)\n");
+
+ /*
+ * AVS : disable AVS for frequency less than 1333
+ */
+ freq = board_cpu_freq_get();
+ device_rev = mv_ctrl_rev_get();
+
+ if (device_rev == 2) { /* for B0 only */
+ u32 cpu_avs;
+ u8 fabric_freq;
+ cpu_avs = reg_read(CPU_AVS_CONTROL2_REG);
+ DEBUG_RD_REG(CPU_AVS_CONTROL2_REG, cpu_avs);
+ cpu_avs &= ~(1 << 9);
+
+ if ((0x4 == freq) || (0xB == freq)) {
+ u32 tmp2;
+
+ tmp2 = reg_read(CPU_AVS_CONTROL0_REG);
+ DEBUG_RD_REG(CPU_AVS_CONTROL0_REG, tmp2);
+ /* cpu upper limit = 1.1V cpu lower limit = 0.9125V */
+ tmp2 |= 0x0FF;
+ reg_write(CPU_AVS_CONTROL0_REG, tmp2);
+ DEBUG_WR_REG(CPU_AVS_CONTROL0_REG, tmp2);
+ cpu_avs |= (1 << 9); /* cpu avs enable */
+ cpu_avs |= (1 << 18); /* AvsAvddDetEn enable */
+ fabric_freq = (reg_read(MPP_SAMPLE_AT_RESET(0)) &
+ SAR0_FABRIC_FREQ_MASK) >> SAR0_FABRIC_FREQ_OFFSET;
+ if ((0xB == freq) && (5 == fabric_freq)) {
+ u32 core_avs;
+
+ core_avs = reg_read(CORE_AVS_CONTROL_0REG);
+ DEBUG_RD_REG(CORE_AVS_CONTROL_0REG, core_avs);
+
+ /*
+ * Set core lower limit = 0.9V &
+ * core upper limit = 0.9125V
+ */
+ core_avs &= ~(0xff);
+ core_avs |= 0x0E;
+ reg_write(CORE_AVS_CONTROL_0REG, core_avs);
+ DEBUG_WR_REG(CORE_AVS_CONTROL_0REG, core_avs);
+
+ core_avs = reg_read(CORE_AVS_CONTROL_2REG);
+ DEBUG_RD_REG(CORE_AVS_CONTROL_2REG, core_avs);
+ core_avs |= (1 << 9); /* core AVS enable */
+ reg_write(CORE_AVS_CONTROL_2REG, core_avs);
+ DEBUG_WR_REG(CORE_AVS_CONTROL_2REG, core_avs);
+
+ tmp2 = reg_read(GENERAL_PURPOSE_RESERVED0_REG);
+ DEBUG_RD_REG(GENERAL_PURPOSE_RESERVED0_REG,
+ tmp2);
+ tmp2 |= 0x1; /* AvsCoreAvddDetEn enable */
+ reg_write(GENERAL_PURPOSE_RESERVED0_REG, tmp2);
+ DEBUG_WR_REG(GENERAL_PURPOSE_RESERVED0_REG,
+ tmp2);
+ }
+ }
+ reg_write(CPU_AVS_CONTROL2_REG, cpu_avs);
+ DEBUG_WR_REG(CPU_AVS_CONTROL2_REG, cpu_avs);
+ }
+
+ info = board_serdes_cfg_get(PEX_MODE_GET(satr11));
+ DEBUG_INIT_FULL_S("info->line0_7= 0x");
+ DEBUG_INIT_FULL_D(info->line0_7, 8);
+ DEBUG_INIT_FULL_S(" info->line8_15= 0x");
+ DEBUG_INIT_FULL_D(info->line8_15, 8);
+ DEBUG_INIT_FULL_S("\n");
+
+ if (info == NULL) {
+ DEBUG_INIT_S("Hight speed PHY Error #1\n");
+ return MV_ERROR;
+ }
+
+ if (config_module & ETM_MODULE_DETECT) { /* step 0.9 ETM */
+ DEBUG_INIT_FULL_S("ETM module detect Step 0.9:\n");
+ reg_write(SERDES_LINE_MUX_REG_0_7, 0x11111111);
+ DEBUG_WR_REG(SERDES_LINE_MUX_REG_0_7, 0x11111111);
+ info->pex_mode[1] = PEX_BUS_DISABLED; /* pex unit 1 is configure for ETM */
+ mdelay(100);
+ reg_write(PEX_PHY_ACCESS_REG(1), (0x002 << 16) | 0xf44d); /* SETM0 - start calibration */
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x002 << 16) | 0xf44d); /* SETM0 - start calibration */
+ reg_write(PEX_PHY_ACCESS_REG(1), (0x302 << 16) | 0xf44d); /* SETM1 - start calibration */
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x302 << 16) | 0xf44d); /* SETM1 - start calibration */
+ reg_write(PEX_PHY_ACCESS_REG(1), (0x001 << 16) | 0xf801); /* SETM0 - SATA mode & 25MHz ref clk */
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x001 << 16) | 0xf801); /* SETM0 - SATA mode & 25MHz ref clk */
+ reg_write(PEX_PHY_ACCESS_REG(1), (0x301 << 16) | 0xf801); /* SETM1 - SATA mode & 25MHz ref clk */
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x301 << 16) | 0xf801); /* SETM1 - SATA mode & 25MHz ref clk */
+ reg_write(PEX_PHY_ACCESS_REG(1), (0x011 << 16) | 0x0BFF); /* SETM0 - G3 full swing AMP */
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x011 << 16) | 0x0BFF); /* SETM0 - G3 full swing AMP */
+ reg_write(PEX_PHY_ACCESS_REG(1), (0x311 << 16) | 0x0BFF); /* SETM1 - G3 full swing AMP */
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x311 << 16) | 0x0BFF); /* SETM1 - G3 full swing AMP */
+ reg_write(PEX_PHY_ACCESS_REG(1), (0x023 << 16) | 0x0800); /* SETM0 - 40 data bit width */
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x023 << 16) | 0x0800); /* SETM0 - 40 data bit width */
+ reg_write(PEX_PHY_ACCESS_REG(1), (0x323 << 16) | 0x0800); /* SETM1 - 40 data bit width */
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x323 << 16) | 0x0800); /* SETM1 - 40 data bit width */
+ reg_write(PEX_PHY_ACCESS_REG(1), (0x046 << 16) | 0x0400); /* lane0(serdes4) */
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x046 << 16) | 0x0400); /* lane0(serdes4) */
+ reg_write(PEX_PHY_ACCESS_REG(1), (0x346 << 16) | 0x0400); /* lane3(serdes7) */
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x346 << 16) | 0x0400); /* lane3(serdes7) */
+ }
+
+ /* STEP -1 [PEX-Only] First phase of PEX-PIPE Configuration: */
+ DEBUG_INIT_FULL_S("Step 1: First phase of PEX-PIPE Configuration\n");
+ for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) {
+ if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
+ continue;
+
+ /* 1. GLOB_CLK_CTRL Reset and Clock Control */
+ reg_write(PEX_PHY_ACCESS_REG(pex_unit), (0xC1 << 16) | 0x25);
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), (0xC1 << 16) | 0x25);
+
+ /* 2. GLOB_TEST_CTRL Test Mode Control */
+ if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4) {
+ reg_write(PEX_PHY_ACCESS_REG(pex_unit),
+ (0xC2 << 16) | 0x200);
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+ (0xC2 << 16) | 0x200);
+ }
+
+ /* 3. GLOB_CLK_SRC_LO Clock Source Low */
+ if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X1) {
+ reg_write(PEX_PHY_ACCESS_REG(pex_unit),
+ (0xC3 << 16) | 0x0F);
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+ (0xC3 << 16) | 0x0F);
+ }
+
+ reg_write(PEX_PHY_ACCESS_REG(pex_unit), (0xC5 << 16) | 0x11F);
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+ (0xC5 << 16) | 0x11F);
+ }
+
+ /*
+ * 2 Configure the desire PIN_PHY_GEN and do power down to the PU_PLL,
+ * PU_RX,PU_TX. (bits[12:5])
+ */
+ DEBUG_INIT_FULL_S("Step 2: Configure the desire PIN_PHY_GEN\n");
+ for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+ line_cfg = get_line_cfg(line_num, info);
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED])
+ continue;
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX])
+ continue;
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) {
+ switch (line_num) {
+ case 4:
+ case 6:
+ sata_port = 0;
+ break;
+ case 5:
+ sata_port = 1;
+ break;
+ default:
+ DEBUG_INIT_C
+ ("SATA port error for serdes line: ",
+ line_num, 2);
+ return MV_ERROR;
+ }
+ tmp = reg_read(SATA_LP_PHY_EXT_CTRL_REG(sata_port));
+ DEBUG_RD_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
+ tmp &= ~((0x1ff << 5) | 0x7);
+ tmp |= ((info->bus_speed & (1 << line_num)) != 0) ?
+ (0x11 << 5) : 0x0;
+
+ reg_write(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
+ DEBUG_WR_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
+ }
+
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) {
+ /*
+ * 4) Configure the desire PIN_PHY_GEN and do power
+ * down to the PU_PLL,PU_RX,PU_TX. (bits[12:5])
+ */
+ tmp = reg_read(SGMII_SERDES_CFG_REG(0));
+ DEBUG_RD_REG(SGMII_SERDES_CFG_REG(0), tmp);
+ tmp &= ~((0x1ff << 5) | 0x7);
+ tmp |= 0x660;
+ reg_write(SGMII_SERDES_CFG_REG(0), tmp);
+ DEBUG_WR_REG(SGMII_SERDES_CFG_REG(0), tmp);
+ continue;
+ }
+
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII0])
+ sgmii_port = 0;
+ else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII1])
+ sgmii_port = 1;
+ else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII2])
+ sgmii_port = 2;
+ else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII3])
+ sgmii_port = 3;
+ else
+ continue;
+
+ tmp = reg_read(SGMII_SERDES_CFG_REG(sgmii_port));
+ DEBUG_RD_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
+ tmp &= ~((0x1ff << 5) | 0x7);
+ tmp |= (((info->bus_speed & (1 << line_num)) != 0) ?
+ (0x88 << 5) : (0x66 << 5));
+ reg_write(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
+ DEBUG_WR_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
+ }
+
+ /* Step 3 - QSGMII enable */
+ DEBUG_INIT_FULL_S("Step 3 QSGMII enable\n");
+ for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+ line_cfg = get_line_cfg(line_num, info);
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) {
+ /* QSGMII Active bit set to true */
+ tmp = reg_read(QSGMII_CONTROL_1_REG);
+ DEBUG_RD_REG(QSGMII_CONTROL_1_REG, tmp);
+ tmp |= (1 << 30);
+#ifdef ERRATA_GL_6572255
+ tmp |= (1 << 27);
+#endif
+ reg_write(QSGMII_CONTROL_1_REG, tmp);
+ DEBUG_WR_REG(QSGMII_CONTROL_1_REG, tmp);
+ }
+ }
+
+ /* Step 4 - configure SERDES MUXes */
+ DEBUG_INIT_FULL_S("Step 4: Configure SERDES MUXes\n");
+ if (config_module & ETM_MODULE_DETECT) {
+ reg_write(SERDES_LINE_MUX_REG_0_7, 0x40041111);
+ DEBUG_WR_REG(SERDES_LINE_MUX_REG_0_7, 0x40041111);
+ } else {
+ reg_write(SERDES_LINE_MUX_REG_0_7, info->line0_7);
+ DEBUG_WR_REG(SERDES_LINE_MUX_REG_0_7, info->line0_7);
+ }
+ reg_write(SERDES_LINE_MUX_REG_8_15, info->line8_15);
+ DEBUG_WR_REG(SERDES_LINE_MUX_REG_8_15, info->line8_15);
+
+ /* Step 5: Activate the RX High Impedance Mode */
+ DEBUG_INIT_FULL_S("Step 5: Activate the RX High Impedance Mode\n");
+ rx_high_imp_mode = 0x8080;
+ if (device_rev == 2) /* for B0 only */
+ rx_high_imp_mode |= 4;
+
+ for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+ /* for each serdes lane */
+ DEBUG_INIT_FULL_S("SERDES ");
+ DEBUG_INIT_FULL_D_10(line_num, 2);
+ line_cfg = get_line_cfg(line_num, info);
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED]) {
+ DEBUG_INIT_FULL_S(" unconnected ***\n");
+ continue;
+ }
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) {
+ pex_unit = line_num >> 2;
+ pex_line_num = line_num % 4;
+ DEBUG_INIT_FULL_S(" - PEX unit ");
+ DEBUG_INIT_FULL_D_10(pex_unit, 1);
+ DEBUG_INIT_FULL_S(" line= ");
+ DEBUG_INIT_FULL_D_10(pex_line_num, 1);
+ DEBUG_INIT_FULL_S("\n");
+
+ /* Needed for PEX_PHY_ACCESS_REG macro */
+ if ((line_num > 7) &&
+ (info->pex_mode[3] == PEX_BUS_MODE_X8))
+ /* lines 8 - 15 are belong to PEX3 in x8 mode */
+ pex_unit = 3;
+
+ if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
+ continue;
+
+ /*
+ * 8) Activate the RX High Impedance Mode field
+ * (bit [2]) in register /PCIe_USB Control (Each MAC
+ * contain different Access to reach its
+ * Serdes-Regfile).
+ * [PEX-Only] Set bit[12]: The analog part latches idle
+ * if PU_TX = 1 and PU_PLL =1.
+ */
+
+ /* Termination enable */
+ if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X1) {
+ in_direct = (0x48 << 16) | (pex_line_num << 24) |
+ 0x1000 | rx_high_imp_mode; /* x1 */
+ } else if ((info->pex_mode[pex_unit] ==
+ PEX_BUS_MODE_X4) && (pex_line_num == 0))
+ in_direct = (0x48 << 16) | (pex_line_num << 24) |
+ 0x1000 | (rx_high_imp_mode & 0xff); /* x4 */
+ else
+ in_direct = 0;
+
+ if (in_direct) {
+ reg_write(PEX_PHY_ACCESS_REG(pex_unit),
+ in_direct);
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+ in_direct);
+ }
+
+ continue;
+ }
+
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) {
+ /*
+ * port 0 for serdes lines 4,6, and port 1 for
+ * serdes lines 5
+ */
+ sata_port = line_num & 1;
+ DEBUG_INIT_FULL_S(" - SATA port ");
+ DEBUG_INIT_FULL_D_10(sata_port, 2);
+ DEBUG_INIT_FULL_S("\n");
+ reg_write(SATA_COMPHY_CTRL_REG(sata_port),
+ rx_high_imp_mode);
+ DEBUG_WR_REG(SATA_COMPHY_CTRL_REG(sata_port),
+ rx_high_imp_mode);
+ continue;
+ }
+
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) {
+ DEBUG_INIT_FULL_S(" - QSGMII\n");
+ reg_write(SGMII_COMPHY_CTRL_REG(0), rx_high_imp_mode);
+ DEBUG_WR_REG(SGMII_COMPHY_CTRL_REG(0),
+ rx_high_imp_mode);
+ continue;
+ }
+
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII0])
+ sgmii_port = 0;
+ else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII1])
+ sgmii_port = 1;
+ else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII2])
+ sgmii_port = 2;
+ else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII3])
+ sgmii_port = 3;
+ else
+ continue;
+ DEBUG_INIT_FULL_S(" - SGMII port ");
+ DEBUG_INIT_FULL_D_10(sgmii_port, 2);
+ DEBUG_INIT_FULL_S("\n");
+ reg_write(SGMII_COMPHY_CTRL_REG(sgmii_port), rx_high_imp_mode);
+ DEBUG_WR_REG(SGMII_COMPHY_CTRL_REG(sgmii_port),
+ rx_high_imp_mode);
+ } /* for each serdes lane */
+
+ /* Step 6 [PEX-Only] PEX-Main configuration (X4 or X1): */
+ DEBUG_INIT_FULL_S("Step 6: [PEX-Only] PEX-Main configuration (X4 or X1)\n");
+ tmp = reg_read(SOC_CTRL_REG);
+ DEBUG_RD_REG(SOC_CTRL_REG, tmp);
+ tmp &= 0x200;
+ if (info->pex_mode[0] == PEX_BUS_MODE_X1)
+ tmp |= PCIE0_QUADX1_EN;
+ if (info->pex_mode[1] == PEX_BUS_MODE_X1)
+ tmp |= PCIE1_QUADX1_EN;
+ if (((reg_read(MPP_SAMPLE_AT_RESET(0)) & PEX_CLK_100MHZ_MASK) >>
+ PEX_CLK_100MHZ_OFFSET) == 0x1)
+ tmp |= (PCIE0_CLK_OUT_EN_MASK | PCIE1_CLK_OUT_EN_MASK);
+
+ reg_write(SOC_CTRL_REG, tmp);
+ DEBUG_WR_REG(SOC_CTRL_REG, tmp);
+
+ /* 6.2 PCI Express Link Capabilities */
+ DEBUG_INIT_FULL_S("Step 6.2: [PEX-Only] PCI Express Link Capabilities\n");
+
+ for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+ line_cfg = get_line_cfg(line_num, info);
+
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) {
+ /*
+ * PCI Express Control
+ * 0xX1A00 [0]:
+ * 0x0 X4-Link.
+ * 0x1 X1-Link
+ */
+ pex_unit = line_num >> 2;
+ pex_if = MV_SERDES_NUM_TO_PEX_NUM(line_num);
+ if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
+ continue;
+
+ /* set Common Clock Configuration */
+ tmp = reg_read(PEX_LINK_CTRL_STATUS_REG(pex_if));
+ DEBUG_RD_REG(PEX_LINK_CTRL_STATUS_REG(pex_if), tmp);
+ tmp |= (1 << 6);
+ reg_write(PEX_LINK_CTRL_STATUS_REG(pex_if), tmp);
+ DEBUG_WR_REG(PEX_LINK_CTRL_STATUS_REG(pex_if), tmp);
+
+ tmp = reg_read(PEX_LINK_CAPABILITIES_REG(pex_if));
+ DEBUG_RD_REG(PEX_LINK_CAPABILITIES_REG(pex_if), tmp);
+ tmp &= ~(0x3FF);
+ if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X1)
+ tmp |= (0x1 << 4);
+ if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4)
+ tmp |= (0x4 << 4);
+ if (0 == PEX_CAPABILITY_GET(satr11))
+ tmp |= 0x1;
+ else
+ tmp |= 0x2;
+ DEBUG_INIT_FULL_S("Step 6.2: PEX ");
+ DEBUG_INIT_FULL_D(pex_if, 1);
+ DEBUG_INIT_FULL_C(" set GEN", (tmp & 3), 1);
+ reg_write(PEX_LINK_CAPABILITIES_REG(pex_if), tmp);
+ DEBUG_WR_REG(PEX_LINK_CAPABILITIES_REG(pex_if), tmp);
+
+ /*
+ * If pex is X4, no need to pass thru the other
+ * 3X1 serdes lines
+ */
+ if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4)
+ line_num += 3;
+ }
+ }
+
+ /*
+ * Step 7 [PEX-X4 Only] To create PEX-Link that contain 4-lanes you
+ * need to config the register SOC_Misc/General Purpose2
+ * (Address= 182F8)
+ */
+ DEBUG_INIT_FULL_S("Step 7: [PEX-X4 Only] To create PEX-Link\n");
+ tmp = reg_read(GEN_PURP_RES_2_REG);
+ DEBUG_RD_REG(GEN_PURP_RES_2_REG, tmp);
+
+ tmp &= 0xFFFF0000;
+ if (info->pex_mode[0] == PEX_BUS_MODE_X4)
+ tmp |= 0x0000000F;
+
+ if (info->pex_mode[1] == PEX_BUS_MODE_X4)
+ tmp |= 0x000000F0;
+
+ if (info->pex_mode[2] == PEX_BUS_MODE_X4)
+ tmp |= 0x00000F00;
+
+ if (info->pex_mode[3] == PEX_BUS_MODE_X4)
+ tmp |= 0x0000F000;
+
+ reg_write(GEN_PURP_RES_2_REG, tmp);
+ DEBUG_WR_REG(GEN_PURP_RES_2_REG, tmp);
+
+ /* Steps 8 , 9 ,10 - use prepared REG addresses and values */
+ DEBUG_INIT_FULL_S("Steps 7,8,9,10 and 11\n");
+
+ /* Prepare PHY parameters for each step according to MUX selection */
+ for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+ /* for each serdes lane */
+
+ line_cfg = get_line_cfg(line_num, info);
+
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED])
+ continue;
+
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) {
+ pex_unit = line_num >> 2;
+ pex_line_num = line_num % 4;
+
+ if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
+ continue;
+ /*
+ * 8) Configure the desire PHY_MODE (bits [7:5])
+ * and REF_FREF_SEL (bits[4:0]) in the register Power
+ * and PLL Control (Each MAC contain different Access
+ * to reach its Serdes-Regfile).
+ */
+ if (((info->pex_mode[pex_unit] == PEX_BUS_MODE_X4) &&
+ (0 == pex_line_num))
+ || ((info->pex_mode[pex_unit] == PEX_BUS_MODE_X1))) {
+ reg_write(PEX_PHY_ACCESS_REG(pex_unit),
+ (0x01 << 16) | (pex_line_num << 24) |
+ 0xFC60);
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+ (0x01 << 16) | (pex_line_num << 24)
+ | 0xFC60);
+ /*
+ * Step 8.1: [PEX-Only] Configure Max PLL Rate
+ * (bit 8 in KVCO Calibration Control and
+ * bits[10:9] in
+ */
+ /* Use Maximum PLL Rate(Bit 8) */
+ reg_write(PEX_PHY_ACCESS_REG(pex_unit),
+ (0x02 << 16) | (1 << 31) |
+ (pex_line_num << 24)); /* read command */
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+ (0x02 << 16) | (1 << 31) |
+ (pex_line_num << 24));
+ tmp = reg_read(PEX_PHY_ACCESS_REG(pex_unit));
+ DEBUG_RD_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp);
+ tmp &= ~(1 << 31);
+ tmp |= (1 << 8);
+ reg_write(PEX_PHY_ACCESS_REG(pex_unit), tmp);
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp);
+
+ /* Use Maximum PLL Rate(Bits [10:9]) */
+ reg_write(PEX_PHY_ACCESS_REG(pex_unit),
+ (0x81 << 16) | (1 << 31) |
+ (pex_line_num << 24)); /* read command */
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+ (0x81 << 16) | (1 << 31) |
+ (pex_line_num << 24));
+ tmp = reg_read(PEX_PHY_ACCESS_REG(pex_unit));
+ DEBUG_RD_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp);
+ tmp &= ~(1 << 31);
+ tmp |= (3 << 9);
+ reg_write(PEX_PHY_ACCESS_REG(pex_unit), tmp);
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp);
+ }
+
+ continue;
+ }
+
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) {
+ /*
+ * Port 0 for serdes lines 4,6, and port 1 for serdes
+ * lines 5
+ */
+ sata_port = line_num & 1;
+
+ /*
+ * 8) Configure the desire PHY_MODE (bits [7:5]) and
+ * REF_FREF_SEL (bits[4:0]) in the register Power
+ * and PLL Control (Each MAC contain different Access
+ * to reach its Serdes-Regfile).
+ */
+ reg_write(SATA_PWR_PLL_CTRL_REG(sata_port), 0xF801);
+ DEBUG_WR_REG(SATA_PWR_PLL_CTRL_REG(sata_port), 0xF801);
+
+ /* 9) Configure the desire SEL_BITS */
+ reg_write(SATA_DIG_LP_ENA_REG(sata_port), 0x400);
+ DEBUG_WR_REG(SATA_DIG_LP_ENA_REG(sata_port), 0x400);
+
+ /* 10) Configure the desire REFCLK_SEL */
+
+ reg_write(SATA_REF_CLK_SEL_REG(sata_port), 0x400);
+ DEBUG_WR_REG(SATA_REF_CLK_SEL_REG(sata_port), 0x400);
+
+ /* 11) Power up to the PU_PLL,PU_RX,PU_TX. */
+ tmp = reg_read(SATA_LP_PHY_EXT_CTRL_REG(sata_port));
+ DEBUG_RD_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
+ tmp |= 7;
+ reg_write(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
+ DEBUG_WR_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp);
+
+ continue;
+ }
+
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) {
+ /*
+ * 8) Configure the desire PHY_MODE (bits [7:5])
+ * and REF_FREF_SEL (bits[4:0]) in the register
+ */
+ reg_write(SGMII_PWR_PLL_CTRL_REG(0), 0xF881);
+ DEBUG_WR_REG(SGMII_PWR_PLL_CTRL_REG(0), 0xF881);
+
+ /*
+ * 9) Configure the desire SEL_BITS (bits [11:0]
+ * in register
+ */
+ reg_write(SGMII_DIG_LP_ENA_REG(0), 0x400);
+ DEBUG_WR_REG(SGMII_DIG_LP_ENA_REG(0), 0x400);
+
+ /*
+ * 10) Configure the desire REFCLK_SEL (bit [10])
+ * in register
+ */
+ reg_write(SGMII_REF_CLK_SEL_REG(0), 0x400);
+ DEBUG_WR_REG(SGMII_REF_CLK_SEL_REG(0), 0x400);
+
+ /* 11) Power up to the PU_PLL,PU_RX,PU_TX. */
+ tmp = reg_read(SGMII_SERDES_CFG_REG(0));
+ DEBUG_RD_REG(SGMII_SERDES_CFG_REG(0), tmp);
+ tmp |= 7;
+ reg_write(SGMII_SERDES_CFG_REG(0), tmp);
+ DEBUG_WR_REG(SGMII_SERDES_CFG_REG(0), tmp);
+ continue;
+ }
+
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII0])
+ sgmii_port = 0;
+ else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII1])
+ sgmii_port = 1;
+ else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII2])
+ sgmii_port = 2;
+ else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII3])
+ sgmii_port = 3;
+ else
+ continue;
+
+ /*
+ * 8) Configure the desire PHY_MODE (bits [7:5]) and
+ * REF_FREF_SEL (bits[4:0]) in the register
+ */
+ reg_write(SGMII_PWR_PLL_CTRL_REG(sgmii_port), 0xF881);
+ DEBUG_WR_REG(SGMII_PWR_PLL_CTRL_REG(sgmii_port), 0xF881);
+
+ /* 9) Configure the desire SEL_BITS (bits [11:0] in register */
+ reg_write(SGMII_DIG_LP_ENA_REG(sgmii_port), 0);
+ DEBUG_WR_REG(SGMII_DIG_LP_ENA_REG(sgmii_port), 0);
+
+ /* 10) Configure the desire REFCLK_SEL (bit [10]) in register */
+ reg_write(SGMII_REF_CLK_SEL_REG(sgmii_port), 0x400);
+ DEBUG_WR_REG(SGMII_REF_CLK_SEL_REG(sgmii_port), 0x400);
+
+ /* 11) Power up to the PU_PLL,PU_RX,PU_TX. */
+ tmp = reg_read(SGMII_SERDES_CFG_REG(sgmii_port));
+ DEBUG_RD_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
+ tmp |= 7;
+ reg_write(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
+ DEBUG_WR_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp);
+
+ } /* for each serdes lane */
+
+ /* Step 12 [PEX-Only] Last phase of PEX-PIPE Configuration */
+ DEBUG_INIT_FULL_S("Steps 12: [PEX-Only] Last phase of PEX-PIPE Configuration\n");
+ for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+ /* for each serdes lane */
+
+ line_cfg = get_line_cfg(line_num, info);
+
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED])
+ continue;
+
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) {
+ pex_unit = line_num >> 2;
+ pex_line_num = line_num % 4;
+ if (0 == pex_line_num) {
+ reg_write(PEX_PHY_ACCESS_REG(pex_unit),
+ (0xC1 << 16) | 0x24);
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit),
+ (0xC1 << 16) | 0x24);
+ }
+ }
+ }
+
+ /*--------------------------------------------------------------*/
+ /* Step 13: Wait 15ms before checking results */
+ DEBUG_INIT_FULL_S("Steps 13: Wait 15ms before checking results");
+ mdelay(15);
+ tmp = 20;
+ while (tmp) {
+ status = MV_OK;
+ for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+ u32 tmp;
+ line_cfg = get_line_cfg(line_num, info);
+ if (line_cfg ==
+ serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED])
+ continue;
+
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX])
+ continue;
+
+ if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) {
+ /*
+ * Port 0 for serdes lines 4,6, and port 1
+ * for serdes lines 5
+ */
+ sata_port = line_num & 1;
+
+ tmp =
+ reg_read(SATA_LP_PHY_EXT_STAT_REG
+ (sata_port));
+ DEBUG_RD_REG(SATA_LP_PHY_EXT_STAT_REG
+ (sata_port), tmp);
+ if ((tmp & 0x7) != 0x7)
+ status = MV_ERROR;
+ continue;
+ }
+
+ if (line_cfg ==
+ serdes_cfg[line_num][SERDES_UNIT_QSGMII]) {
+ tmp = reg_read(SGMII_SERDES_STAT_REG(0));
+ DEBUG_RD_REG(SGMII_SERDES_STAT_REG(0), tmp);
+ if ((tmp & 0x7) != 0x7)
+ status = MV_ERROR;
+ continue;
+ }
+
+ if (line_cfg ==
+ serdes_cfg[line_num][SERDES_UNIT_SGMII0])
+ sgmii_port = 0;
+ else if (line_cfg ==
+ serdes_cfg[line_num][SERDES_UNIT_SGMII1])
+ sgmii_port = 1;
+ else if (line_cfg ==
+ serdes_cfg[line_num][SERDES_UNIT_SGMII2])
+ sgmii_port = 2;
+ else if (line_cfg ==
+ serdes_cfg[line_num][SERDES_UNIT_SGMII3])
+ sgmii_port = 3;
+ else
+ continue;
+
+ tmp = reg_read(SGMII_SERDES_STAT_REG(sgmii_port));
+ DEBUG_RD_REG(SGMII_SERDES_STAT_REG(sgmii_port), tmp);
+ if ((tmp & 0x7) != 0x7)
+ status = MV_ERROR;
+ }
+
+ if (status == MV_OK)
+ break;
+ mdelay(5);
+ tmp--;
+ }
+
+ /*
+ * Step14 [PEX-Only] In order to configure RC/EP mode please write
+ * to register 0x0060 bits
+ */
+ DEBUG_INIT_FULL_S("Steps 14: [PEX-Only] In order to configure\n");
+ for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) {
+ if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
+ continue;
+ tmp =
+ reg_read(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit)));
+ DEBUG_RD_REG(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit)),
+ tmp);
+ tmp &= ~(0xf << 20);
+ if (info->pex_type == MV_PEX_ROOT_COMPLEX)
+ tmp |= (0x4 << 20);
+ else
+ tmp |= (0x1 << 20);
+ reg_write(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit)),
+ tmp);
+ DEBUG_WR_REG(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit)),
+ tmp);
+ }
+
+ /*
+ * Step 15 [PEX-Only] Only for EP mode set to Zero bits 19 and 16 of
+ * register 0x1a60
+ */
+ DEBUG_INIT_FULL_S("Steps 15: [PEX-Only] In order to configure\n");
+ for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) {
+ if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED)
+ continue;
+ if (info->pex_type == MV_PEX_END_POINT) {
+ tmp =
+ reg_read(PEX_DBG_CTRL_REG
+ (MV_PEX_UNIT_TO_IF(pex_unit)));
+ DEBUG_RD_REG(PEX_DBG_CTRL_REG
+ (MV_PEX_UNIT_TO_IF(pex_unit)), tmp);
+ tmp &= 0xfff6ffff;
+ reg_write(PEX_DBG_CTRL_REG(MV_PEX_UNIT_TO_IF(pex_unit)),
+ tmp);
+ DEBUG_WR_REG(PEX_DBG_CTRL_REG
+ (MV_PEX_UNIT_TO_IF(pex_unit)), tmp);
+ }
+ }
+
+ if (info->serdes_m_phy_change) {
+ MV_SERDES_CHANGE_M_PHY *serdes_m_phy_change;
+ u32 bus_speed;
+ for (line_num = 0; line_num < max_serdes_lines; line_num++) {
+ line_cfg = get_line_cfg(line_num, info);
+ if (line_cfg ==
+ serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED])
+ continue;
+ serdes_m_phy_change = info->serdes_m_phy_change;
+ bus_speed = info->bus_speed & (1 << line_num);
+ while (serdes_m_phy_change->type !=
+ SERDES_UNIT_UNCONNECTED) {
+ switch (serdes_m_phy_change->type) {
+ case SERDES_UNIT_PEX:
+ if (line_cfg != SERDES_UNIT_PEX)
+ break;
+ pex_unit = line_num >> 2;
+ pex_line_num = line_num % 4;
+ if (info->pex_mode[pex_unit] ==
+ PEX_BUS_DISABLED)
+ break;
+ if ((info->pex_mode[pex_unit] ==
+ PEX_BUS_MODE_X4) && pex_line_num)
+ break;
+
+ if (bus_speed) {
+ reg_write(PEX_PHY_ACCESS_REG
+ (pex_unit),
+ (pex_line_num << 24) |
+ serdes_m_phy_change->val_hi_speed);
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG
+ (pex_unit),
+ (pex_line_num <<
+ 24) |
+ serdes_m_phy_change->val_hi_speed);
+ } else {
+ reg_write(PEX_PHY_ACCESS_REG
+ (pex_unit),
+ (pex_line_num << 24) |
+ serdes_m_phy_change->val_low_speed);
+ DEBUG_WR_REG(PEX_PHY_ACCESS_REG
+ (pex_unit),
+ (pex_line_num <<
+ 24) |
+ serdes_m_phy_change->val_low_speed);
+ }
+ break;
+ case SERDES_UNIT_SATA:
+ if (line_cfg != SERDES_UNIT_SATA)
+ break;
+ /*
+ * Port 0 for serdes lines 4,6, and
+ * port 1 for serdes lines 5
+ */
+ sata_port = line_num & 1;
+ if (bus_speed) {
+ reg_write(SATA_BASE_REG
+ (sata_port) |
+ serdes_m_phy_change->reg_hi_speed,
+ serdes_m_phy_change->val_hi_speed);
+ DEBUG_WR_REG(SATA_BASE_REG
+ (sata_port) |
+ serdes_m_phy_change->reg_hi_speed,
+ serdes_m_phy_change->val_hi_speed);
+ } else {
+ reg_write(SATA_BASE_REG
+ (sata_port) |
+ serdes_m_phy_change->reg_low_speed,
+ serdes_m_phy_change->val_low_speed);
+ DEBUG_WR_REG(SATA_BASE_REG
+ (sata_port) |
+ serdes_m_phy_change->reg_low_speed,
+ serdes_m_phy_change->val_low_speed);
+ }
+ break;
+ case SERDES_UNIT_SGMII0:
+ case SERDES_UNIT_SGMII1:
+ case SERDES_UNIT_SGMII2:
+ case SERDES_UNIT_SGMII3:
+ if (line_cfg == serdes_cfg[line_num]
+ [SERDES_UNIT_SGMII0])
+ sgmii_port = 0;
+ else if (line_cfg ==
+ serdes_cfg[line_num]
+ [SERDES_UNIT_SGMII1])
+ sgmii_port = 1;
+ else if (line_cfg ==
+ serdes_cfg[line_num]
+ [SERDES_UNIT_SGMII2])
+ sgmii_port = 2;
+ else if (line_cfg ==
+ serdes_cfg[line_num]
+ [SERDES_UNIT_SGMII3])
+ sgmii_port = 3;
+ else
+ break;
+ if (bus_speed) {
+ reg_write(MV_ETH_REGS_BASE
+ (sgmii_port) |
+ serdes_m_phy_change->reg_hi_speed,
+ serdes_m_phy_change->val_hi_speed);
+ DEBUG_WR_REG(MV_ETH_REGS_BASE
+ (sgmii_port) |
+ serdes_m_phy_change->reg_hi_speed,
+ serdes_m_phy_change->val_hi_speed);
+ } else {
+ reg_write(MV_ETH_REGS_BASE
+ (sgmii_port) |
+ serdes_m_phy_change->reg_low_speed,
+ serdes_m_phy_change->val_low_speed);
+ DEBUG_WR_REG(MV_ETH_REGS_BASE
+ (sgmii_port) |
+ serdes_m_phy_change->reg_low_speed,
+ serdes_m_phy_change->val_low_speed);
+ }
+ break;
+ case SERDES_UNIT_QSGMII:
+ if (line_cfg != SERDES_UNIT_QSGMII)
+ break;
+ if (bus_speed) {
+ reg_write
+ (serdes_m_phy_change->reg_hi_speed,
+ serdes_m_phy_change->val_hi_speed);
+ DEBUG_WR_REG
+ (serdes_m_phy_change->reg_hi_speed,
+ serdes_m_phy_change->val_hi_speed);
+ } else {
+ reg_write
+ (serdes_m_phy_change->reg_low_speed,
+ serdes_m_phy_change->val_low_speed);
+ DEBUG_WR_REG
+ (serdes_m_phy_change->reg_low_speed,
+ serdes_m_phy_change->val_low_speed);
+ }
+ break;
+ default:
+ break;
+ }
+ serdes_m_phy_change++;
+ }
+ }
+ }
+
+ /* Step 16 [PEX-Only] Training Enable */
+ DEBUG_INIT_FULL_S("Steps 16: [PEX-Only] Training Enable");
+ tmp = reg_read(SOC_CTRL_REG);
+ DEBUG_RD_REG(SOC_CTRL_REG, tmp);
+ tmp &= ~(0x0F);
+ for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) {
+ reg_write(PEX_CAUSE_REG(pex_unit), 0);
+ DEBUG_WR_REG(PEX_CAUSE_REG(pex_unit), 0);
+ if (info->pex_mode[pex_unit] != PEX_BUS_DISABLED)
+ tmp |= (0x1 << pex_unit);
+ }
+ reg_write(SOC_CTRL_REG, tmp);
+ DEBUG_WR_REG(SOC_CTRL_REG, tmp);
+
+ /* Step 17: Speed change to target speed and width */
+ {
+ u32 tmp_reg, tmp_pex_reg;
+ u32 addr;
+ u32 first_busno, next_busno;
+ u32 max_link_width = 0;
+ u32 neg_link_width = 0;
+ pex_if_num = pex_max_if_get();
+ mdelay(150);
+ DEBUG_INIT_FULL_C("step 17: max_if= 0x", pex_if_num, 1);
+ next_busno = 0;
+ for (pex_if = 0; pex_if < pex_if_num; pex_if++) {
+ line_num = (pex_if <= 8) ? pex_if : 12;
+ line_cfg = get_line_cfg(line_num, info);
+ if (line_cfg != serdes_cfg[line_num][SERDES_UNIT_PEX])
+ continue;
+ pex_unit = (pex_if < 9) ? (pex_if >> 2) : 3;
+ DEBUG_INIT_FULL_S("step 17: PEX");
+ DEBUG_INIT_FULL_D(pex_if, 1);
+ DEBUG_INIT_FULL_C(" pex_unit= ", pex_unit, 1);
+
+ if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED) {
+ DEBUG_INIT_FULL_C("PEX disabled interface ",
+ pex_if, 1);
+ if (pex_if < 8)
+ pex_if += 3;
+ continue;
+ }
+ first_busno = next_busno;
+ if ((info->pex_type == MV_PEX_END_POINT) &&
+ (0 == pex_if)) {
+ if ((pex_if < 8) && (info->pex_mode[pex_unit] ==
+ PEX_BUS_MODE_X4))
+ pex_if += 3;
+ continue;
+ }
+
+ tmp = reg_read(PEX_DBG_STATUS_REG(pex_if));
+ DEBUG_RD_REG(PEX_DBG_STATUS_REG(pex_if), tmp);
+ if ((tmp & 0x7f) == 0x7e) {
+ next_busno++;
+ tmp = reg_read(PEX_LINK_CAPABILITIES_REG(pex_if));
+ max_link_width = tmp;
+ DEBUG_RD_REG((PEX_LINK_CAPABILITIES_REG
+ (pex_if)), tmp);
+ max_link_width = ((max_link_width >> 4) & 0x3F);
+ neg_link_width =
+ reg_read(PEX_LINK_CTRL_STATUS_REG(pex_if));
+ DEBUG_RD_REG((PEX_LINK_CTRL_STATUS_REG(pex_if)),
+ neg_link_width);
+ neg_link_width = ((neg_link_width >> 20) & 0x3F);
+ if (max_link_width > neg_link_width) {
+ tmp &= ~(0x3F << 4);
+ tmp |= (neg_link_width << 4);
+ reg_write(PEX_LINK_CAPABILITIES_REG
+ (pex_if), tmp);
+ DEBUG_WR_REG((PEX_LINK_CAPABILITIES_REG
+ (pex_if)), tmp);
+ mdelay(1); /* wait 1ms before reading capability for speed */
+ DEBUG_INIT_S("PEX");
+ DEBUG_INIT_D(pex_if, 1);
+ DEBUG_INIT_C(": change width to X",
+ neg_link_width, 1);
+ }
+ tmp_pex_reg =
+ reg_read((PEX_CFG_DIRECT_ACCESS
+ (pex_if,
+ PEX_LINK_CAPABILITY_REG)));
+ DEBUG_RD_REG((PEX_CFG_DIRECT_ACCESS
+ (pex_if,
+ PEX_LINK_CAPABILITY_REG)),
+ tmp_pex_reg);
+ tmp_pex_reg &= (0xF);
+ if (tmp_pex_reg == 0x2) {
+ tmp_reg =
+ (reg_read
+ (PEX_CFG_DIRECT_ACCESS
+ (pex_if,
+ PEX_LINK_CTRL_STAT_REG)) &
+ 0xF0000) >> 16;
+ DEBUG_RD_REG(PEX_CFG_DIRECT_ACCESS
+ (pex_if,
+ PEX_LINK_CTRL_STAT_REG),
+ tmp_pex_reg);
+ /* check if the link established is GEN1 */
+ if (tmp_reg == 0x1) {
+ pex_local_bus_num_set(pex_if,
+ first_busno);
+ pex_local_dev_num_set(pex_if,
+ 1);
+
+ DEBUG_INIT_FULL_S("** Link is Gen1, check the EP capability\n");
+ /* link is Gen1, check the EP capability */
+ addr =
+ pex_cfg_read(pex_if,
+ first_busno, 0,
+ 0,
+ 0x34) & 0xFF;
+ DEBUG_INIT_FULL_C("pex_cfg_read: return addr=0x%x",
+ addr, 4);
+ if (addr == 0xff) {
+ DEBUG_INIT_FULL_C("pex_cfg_read: return 0xff -->PEX (%d): Detected No Link.",
+ pex_if, 1);
+ continue;
+ }
+ while ((pex_cfg_read
+ (pex_if, first_busno, 0,
+ 0,
+ addr) & 0xFF) !=
+ 0x10) {
+ addr =
+ (pex_cfg_read
+ (pex_if,
+ first_busno, 0, 0,
+ addr) & 0xFF00) >>
+ 8;
+ }
+ if ((pex_cfg_read
+ (pex_if, first_busno, 0, 0,
+ addr + 0xC) & 0xF) >=
+ 0x2) {
+ tmp =
+ reg_read
+ (PEX_LINK_CTRL_STATUS2_REG
+ (pex_if));
+ DEBUG_RD_REG
+ (PEX_LINK_CTRL_STATUS2_REG
+ (pex_if), tmp);
+ tmp &= ~(0x1 | 1 << 1);
+ tmp |= (1 << 1);
+ reg_write
+ (PEX_LINK_CTRL_STATUS2_REG
+ (pex_if), tmp);
+ DEBUG_WR_REG
+ (PEX_LINK_CTRL_STATUS2_REG
+ (pex_if), tmp);
+
+ tmp =
+ reg_read
+ (PEX_CTRL_REG
+ (pex_if));
+ DEBUG_RD_REG
+ (PEX_CTRL_REG
+ (pex_if), tmp);
+ tmp |= (1 << 10);
+ reg_write(PEX_CTRL_REG
+ (pex_if),
+ tmp);
+ DEBUG_WR_REG
+ (PEX_CTRL_REG
+ (pex_if), tmp);
+ mdelay(10); /* We need to wait 10ms before reading the PEX_DBG_STATUS_REG in order not to read the status of the former state */
+ DEBUG_INIT_FULL_S
+ ("Gen2 client!\n");
+ } else {
+ DEBUG_INIT_FULL_S
+ ("GEN1 client!\n");
+ }
+ }
+ }
+ } else {
+ DEBUG_INIT_FULL_S("PEX");
+ DEBUG_INIT_FULL_D(pex_if, 1);
+ DEBUG_INIT_FULL_S(" : Detected No Link. Status Reg(0x");
+ DEBUG_INIT_FULL_D(PEX_DBG_STATUS_REG(pex_if),
+ 8);
+ DEBUG_INIT_FULL_C(") = 0x", tmp, 8);
+ }
+
+ if ((pex_if < 8) &&
+ (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4))
+ pex_if += 3;
+ }
+ }
+
+ /* Step 18: update pex DEVICE ID */
+ {
+ u32 devId;
+ pex_if_num = pex_max_if_get();
+ ctrl_mode = ctrl_model_get();
+ for (pex_if = 0; pex_if < pex_if_num; pex_if++) {
+ pex_unit = (pex_if < 9) ? (pex_if >> 2) : 3;
+ if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED) {
+ if ((pex_if < 8) &&
+ (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4))
+ pex_if += 3;
+ continue;
+ }
+
+ devId = reg_read(PEX_CFG_DIRECT_ACCESS(
+ pex_if, PEX_DEVICE_AND_VENDOR_ID));
+ devId &= 0xFFFF;
+ devId |= ((ctrl_mode << 16) & 0xffff0000);
+ DEBUG_INIT_S("Update Device ID PEX");
+ DEBUG_INIT_D(pex_if, 1);
+ DEBUG_INIT_D(devId, 8);
+ DEBUG_INIT_S("\n");
+ reg_write(PEX_CFG_DIRECT_ACCESS
+ (pex_if, PEX_DEVICE_AND_VENDOR_ID), devId);
+ if ((pex_if < 8) &&
+ (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4))
+ pex_if += 3;
+ }
+ DEBUG_INIT_S("Update PEX Device ID 0x");
+ DEBUG_INIT_D(ctrl_mode, 4);
+ DEBUG_INIT_S("0\n");
+ }
+ tmp = reg_read(PEX_DBG_STATUS_REG(0));
+ DEBUG_RD_REG(PEX_DBG_STATUS_REG(0), tmp);
+
+ DEBUG_INIT_S(ENDED_OK);
+ return MV_OK;
+}
+
+/* PEX configuration space read write */
+
+/*
+ * pex_cfg_read - Read from configuration space
+ *
+ * DESCRIPTION:
+ * This function performs a 32 bit read from PEX configuration space.
+ * It supports both type 0 and type 1 of Configuration Transactions
+ * (local and over bridge). In order to read from local bus segment, use
+ * bus number retrieved from mvPexLocalBusNumGet(). Other bus numbers
+ * will result configuration transaction of type 1 (over bridge).
+ *
+ * INPUT:
+ * pex_if - PEX interface number.
+ * bus - PEX segment bus number.
+ * dev - PEX device number.
+ * func - Function number.
+ * offss - Register offset.
+ *
+ * OUTPUT:
+ * None.
+ *
+ * RETURN:
+ * 32bit register data, 0xffffffff on error
+ *
+ */
+u32 pex_cfg_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 offs)
+{
+ u32 pex_data = 0;
+ u32 local_dev, local_bus;
+ u32 val;
+
+ if (pex_if >= MV_PEX_MAX_IF)
+ return 0xFFFFFFFF;
+
+ if (dev >= MAX_PEX_DEVICES) {
+ DEBUG_INIT_C("pex_cfg_read: ERR. device number illigal ", dev,
+ 1);
+ return 0xFFFFFFFF;
+ }
+
+ if (func >= MAX_PEX_FUNCS) {
+ DEBUG_INIT_C("pex_cfg_read: ERR. function num illigal ", func,
+ 1);
+ return 0xFFFFFFFF;
+ }
+
+ if (bus >= MAX_PEX_BUSSES) {
+ DEBUG_INIT_C("pex_cfg_read: ERR. bus number illigal ", bus, 1);
+ return MV_ERROR;
+ }
+ val = reg_read(PEX_STATUS_REG(pex_if));
+
+ local_dev =
+ ((val & PXSR_PEX_DEV_NUM_MASK) >> PXSR_PEX_DEV_NUM_OFFS);
+ local_bus =
+ ((val & PXSR_PEX_BUS_NUM_MASK) >> PXSR_PEX_BUS_NUM_OFFS);
+
+ /* Speed up the process. In case on no link, return MV_ERROR */
+ if ((dev != local_dev) || (bus != local_bus)) {
+ pex_data = reg_read(PEX_STATUS_REG(pex_if));
+
+ if ((pex_data & PXSR_DL_DOWN))
+ return MV_ERROR;
+ }
+
+ /*
+ * In PCI Express we have only one device number
+ * and this number is the first number we encounter else that the
+ * local_dev spec pex define return on config read/write on any device
+ */
+ if (bus == local_bus) {
+ if (local_dev == 0) {
+ /*
+ * If local dev is 0 then the first number we encounter
+ * after 0 is 1
+ */
+ if ((dev != 1) && (dev != local_dev))
+ return MV_ERROR;
+ } else {
+ /*
+ * If local dev is not 0 then the first number we
+ * encounter is 0
+ */
+ if ((dev != 0) && (dev != local_dev))
+ return MV_ERROR;
+ }
+ }
+
+ /* Creating PEX address to be passed */
+ pex_data = (bus << PXCAR_BUS_NUM_OFFS);
+ pex_data |= (dev << PXCAR_DEVICE_NUM_OFFS);
+ pex_data |= (func << PXCAR_FUNC_NUM_OFFS);
+ pex_data |= (offs & PXCAR_REG_NUM_MASK); /* lgacy register space */
+ /* extended register space */
+ pex_data |= (((offs & PXCAR_REAL_EXT_REG_NUM_MASK) >>
+ PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS);
+
+ pex_data |= PXCAR_CONFIG_EN;
+
+ /* Write the address to the PEX configuration address register */
+ reg_write(PEX_CFG_ADDR_REG(pex_if), pex_data);
+
+ /*
+ * In order to let the PEX controller absorbed the address of the read
+ * transaction we perform a validity check that the address was written
+ */
+ if (pex_data != reg_read(PEX_CFG_ADDR_REG(pex_if)))
+ return MV_ERROR;
+
+ /* cleaning Master Abort */
+ reg_bit_set(PEX_CFG_DIRECT_ACCESS(pex_if, PEX_STATUS_AND_COMMAND),
+ PXSAC_MABORT);
+ /* Read the Data returned in the PEX Data register */
+ pex_data = reg_read(PEX_CFG_DATA_REG(pex_if));
+
+ DEBUG_INIT_FULL_C(" --> ", pex_data, 4);
+
+ return pex_data;
+}
+
+/*
+ * pex_local_bus_num_set - Set PEX interface local bus number.
+ *
+ * DESCRIPTION:
+ * This function sets given PEX interface its local bus number.
+ * Note: In case the PEX interface is PEX-X, the information is read-only.
+ *
+ * INPUT:
+ * pex_if - PEX interface number.
+ * bus_num - Bus number.
+ *
+ * OUTPUT:
+ * None.
+ *
+ * RETURN:
+ * MV_NOT_ALLOWED in case PEX interface is PEX-X.
+ * MV_BAD_PARAM on bad parameters ,
+ * otherwise MV_OK
+ *
+ */
+int pex_local_bus_num_set(u32 pex_if, u32 bus_num)
+{
+ u32 val;
+
+ if (bus_num >= MAX_PEX_BUSSES) {
+ DEBUG_INIT_C("pex_local_bus_num_set: ERR. bus number illigal %d\n",
+ bus_num, 4);
+ return MV_ERROR;
+ }
+
+ val = reg_read(PEX_STATUS_REG(pex_if));
+ val &= ~PXSR_PEX_BUS_NUM_MASK;
+ val |= (bus_num << PXSR_PEX_BUS_NUM_OFFS) & PXSR_PEX_BUS_NUM_MASK;
+ reg_write(PEX_STATUS_REG(pex_if), val);
+
+ return MV_OK;
+}
+
+/*
+ * pex_local_dev_num_set - Set PEX interface local device number.
+ *
+ * DESCRIPTION:
+ * This function sets given PEX interface its local device number.
+ * Note: In case the PEX interface is PEX-X, the information is read-only.
+ *
+ * INPUT:
+ * pex_if - PEX interface number.
+ * dev_num - Device number.
+ *
+ * OUTPUT:
+ * None.
+ *
+ * RETURN:
+ * MV_NOT_ALLOWED in case PEX interface is PEX-X.
+ * MV_BAD_PARAM on bad parameters ,
+ * otherwise MV_OK
+ *
+ */
+int pex_local_dev_num_set(u32 pex_if, u32 dev_num)
+{
+ u32 val;
+
+ if (pex_if >= MV_PEX_MAX_IF)
+ return MV_BAD_PARAM;
+
+ val = reg_read(PEX_STATUS_REG(pex_if));
+ val &= ~PXSR_PEX_DEV_NUM_MASK;
+ val |= (dev_num << PXSR_PEX_DEV_NUM_OFFS) & PXSR_PEX_DEV_NUM_MASK;
+ reg_write(PEX_STATUS_REG(pex_if), val);
+
+ return MV_OK;
+}
diff --git a/arch/arm/mvebu-common/serdes/high_speed_env_spec.c b/arch/arm/mvebu-common/serdes/high_speed_env_spec.c
new file mode 100644
index 0000000..115ec2c
--- /dev/null
+++ b/arch/arm/mvebu-common/serdes/high_speed_env_spec.c
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+#include "high_speed_env_spec.h"
+
+MV_SERDES_CHANGE_M_PHY serdes_change_m_phy[] = {
+ /* SERDES TYPE, Low REG OFFS, Low REG VALUE, Hi REG OFS, Hi REG VALUE */
+ {
+ /* PEX: Change of Slew Rate port0 */
+ SERDES_UNIT_PEX, 0x0,
+ (0x0F << 16) | 0x2a21, 0x0, (0x0F << 16) | 0x2a21
+ }, {
+ /* PEX: Change PLL BW port0 */
+ SERDES_UNIT_PEX, 0x0,
+ (0x4F << 16) | 0x6219, 0x0, (0x4F << 16) | 0x6219
+ }, {
+ /* SATA: Slew rate change port 0 */
+ SERDES_UNIT_SATA, 0x0083C, 0x8a31, 0x0083C, 0x8a31
+ }, {
+ /* SATA: Slew rate change port 0 */
+ SERDES_UNIT_SATA, 0x00834, 0xc928, 0x00834, 0xc928
+ }, {
+ /* SATA: Slew rate change port 0 */
+ SERDES_UNIT_SATA, 0x00838, 0x30f0, 0x00838, 0x30f0
+ }, {
+ /* SATA: Slew rate change port 0 */
+ SERDES_UNIT_SATA, 0x00840, 0x30f5, 0x00840, 0x30f5
+ }, {
+ /* SGMII: FFE setting Port0 */
+ SERDES_UNIT_SGMII0, 0x00E18, 0x989F, 0x00E18, 0x989F
+ }, {
+ /* SGMII: SELMUP and SELMUF Port0 */
+ SERDES_UNIT_SGMII0, 0x00E38, 0x10FA, 0x00E38, 0x10FA
+ }, {
+ /* SGMII: Amplitude new setting gen2 Port3 */
+ SERDES_UNIT_SGMII0, 0x00E34, 0xC968, 0x00E34, 0xC66C
+ }, {
+ /* QSGMII: Amplitude and slew rate change */
+ SERDES_UNIT_QSGMII, 0x72E34, 0xaa58, 0x72E34, 0xaa58
+ }, {
+ /* QSGMII: SELMUP and SELMUF */
+ SERDES_UNIT_QSGMII, 0x72e38, 0x10aF, 0x72e38, 0x10aF
+ }, {
+ /* QSGMII: 0x72e18 */
+ SERDES_UNIT_QSGMII, 0x72e18, 0x98AC, 0x72e18, 0x98AC
+ }, {
+ /* Null terminated */
+ SERDES_UNIT_UNCONNECTED, 0, 0
+ }
+};
+
+MV_BIN_SERDES_CFG db88f78xx0_serdes_cfg[] = {
+ /* Z1B */
+ {MV_PEX_ROOT_COMPLEX, 0x32221111, 0x11111111,
+ {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+ 0x0030, serdes_change_m_phy}, /* Default */
+ {MV_PEX_ROOT_COMPLEX, 0x31211111, 0x11111111,
+ {PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+ 0x0030, serdes_change_m_phy}, /* PEX module */
+ /* Z1A */
+ {MV_PEX_ROOT_COMPLEX, 0x32220000, 0x00000000,
+ {PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED,
+ PEX_BUS_DISABLED}, 0x0030, serdes_change_m_phy}, /* Default - Z1A */
+ {MV_PEX_ROOT_COMPLEX, 0x31210000, 0x00000000,
+ {PEX_BUS_DISABLED, PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+ 0x0030, serdes_change_m_phy} /* PEX module - Z1A */
+};
+
+MV_BIN_SERDES_CFG db88f78xx0rev2_serdes_cfg[] = {
+ /* A0 */
+ {MV_PEX_ROOT_COMPLEX, 0x33221111, 0x11111111,
+ {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+ 0x0030, serdes_change_m_phy}, /* Default: No Pex module, PEX0 x1, disabled */
+ {MV_PEX_ROOT_COMPLEX, 0x33211111, 0x11111111,
+ {PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+ 0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x1, PEX1 x1 */
+ {MV_PEX_ROOT_COMPLEX, 0x33221111, 0x11111111,
+ {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+ 0x0030, serdes_change_m_phy}, /* no Pex module, PEX0 x4, PEX1 disabled */
+ {MV_PEX_ROOT_COMPLEX, 0x33211111, 0x11111111,
+ {PEX_BUS_MODE_X4, PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+ 0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x4, PEX1 x1 */
+ {MV_PEX_ROOT_COMPLEX, 0x11111111, 0x11111111,
+ {PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+ 0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x1, PEX1 x4 */
+ {MV_PEX_ROOT_COMPLEX, 0x11111111, 0x11111111,
+ {PEX_BUS_MODE_X4, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+ 0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x4, PEX1 x4 */
+};
+
+MV_BIN_SERDES_CFG rd78460nas_serdes_cfg[] = {
+ {MV_PEX_ROOT_COMPLEX, 0x00223001, 0x11111111,
+ {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+ 0x0030, serdes_change_m_phy}, /* Default */
+ {MV_PEX_ROOT_COMPLEX, 0x33320201, 0x11111111,
+ {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+ 0x00f4, serdes_change_m_phy}, /* Switch module */
+};
+
+MV_BIN_SERDES_CFG rd78460_serdes_cfg[] = {
+ {MV_PEX_ROOT_COMPLEX, 0x22321111, 0x00000000,
+ {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+ 0x0010, serdes_change_m_phy}, /* CPU0 */
+ {MV_PEX_ROOT_COMPLEX, 0x00321111, 0x00000000,
+ {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+ 0x0010, serdes_change_m_phy} /* CPU1-3 */
+};
+
+MV_BIN_SERDES_CFG rd78460server_rev2_serdes_cfg[] = {
+ {MV_PEX_ROOT_COMPLEX, 0x00321111, 0x00000000,
+ {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+ 0x0010, serdes_change_m_phy}, /* CPU0 */
+ {MV_PEX_ROOT_COMPLEX, 0x00321111, 0x00000000,
+ {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+ 0x0010, serdes_change_m_phy} /* CPU1-3 */
+};
+
+MV_BIN_SERDES_CFG db78X60pcac_serdes_cfg[] = {
+ {MV_PEX_END_POINT, 0x22321111, 0x00000000,
+ {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+ 0x0010, serdes_change_m_phy} /* Default */
+};
+
+MV_BIN_SERDES_CFG db78X60pcacrev2_serdes_cfg[] = {
+ {MV_PEX_END_POINT, 0x23321111, 0x00000000,
+ {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+ 0x0010, serdes_change_m_phy} /* Default */
+};
+
+MV_BIN_SERDES_CFG fpga88f78xx0_serdes_cfg[] = {
+ {MV_PEX_ROOT_COMPLEX, 0x00000000, 0x00000000,
+ {PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED},
+ 0x0000, serdes_change_m_phy} /* No PEX in FPGA */
+};
+
+MV_BIN_SERDES_CFG db78X60amc_serdes_cfg[] = {
+ {MV_PEX_ROOT_COMPLEX, 0x33111111, 0x00010001,
+ {PEX_BUS_MODE_X4, PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_MODE_X1},
+ 0x0030, serdes_change_m_phy} /* Default */
+};
+
+/*
+ * ARMADA-XP CUSTOMER BOARD
+ */
+MV_BIN_SERDES_CFG rd78460customer_serdes_cfg[] = {
+ {MV_PEX_ROOT_COMPLEX, 0x00223001, 0x11111111,
+ {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+ 0x00000030, serdes_change_m_phy}, /* Default */
+ {MV_PEX_ROOT_COMPLEX, 0x33320201, 0x11111111,
+ {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+ 0x00000030, serdes_change_m_phy}, /* Switch module */
+};
+
+MV_BIN_SERDES_CFG rd78460AXP_GP_serdes_cfg[] = {
+ {MV_PEX_ROOT_COMPLEX, 0x00223001, 0x11111111,
+ {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4},
+ 0x0030, serdes_change_m_phy} /* Default */
+};
+
+MV_BIN_SERDES_CFG *serdes_info_tbl[] = {
+ db88f78xx0_serdes_cfg,
+ rd78460_serdes_cfg,
+ db78X60pcac_serdes_cfg,
+ fpga88f78xx0_serdes_cfg,
+ db88f78xx0rev2_serdes_cfg,
+ rd78460nas_serdes_cfg,
+ db78X60amc_serdes_cfg,
+ db78X60pcacrev2_serdes_cfg,
+ rd78460server_rev2_serdes_cfg,
+ rd78460AXP_GP_serdes_cfg,
+ rd78460customer_serdes_cfg
+};
+
+u8 rd78460gp_twsi_dev[] = { 0x4C, 0x4D, 0x4E };
+u8 db88f78xx0rev2_twsi_dev[] = { 0x4C, 0x4D, 0x4E, 0x4F };
diff --git a/arch/arm/mvebu-common/serdes/high_speed_env_spec.h b/arch/arm/mvebu-common/serdes/high_speed_env_spec.h
new file mode 100644
index 0000000..e5aa1b0
--- /dev/null
+++ b/arch/arm/mvebu-common/serdes/high_speed_env_spec.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __HIGHSPEED_ENV_SPEC_H
+#define __HIGHSPEED_ENV_SPEC_H
+
+#include "../../../drivers/ddr/mvebu/ddr3_hw_training.h"
+
+typedef enum {
+ SERDES_UNIT_UNCONNECTED = 0x0,
+ SERDES_UNIT_PEX = 0x1,
+ SERDES_UNIT_SATA = 0x2,
+ SERDES_UNIT_SGMII0 = 0x3,
+ SERDES_UNIT_SGMII1 = 0x4,
+ SERDES_UNIT_SGMII2 = 0x5,
+ SERDES_UNIT_SGMII3 = 0x6,
+ SERDES_UNIT_QSGMII = 0x7,
+ SERDES_UNIT_SETM = 0x8,
+ SERDES_LAST_UNIT
+} MV_BIN_SERDES_UNIT_INDX;
+
+
+typedef enum {
+ PEX_BUS_DISABLED = 0,
+ PEX_BUS_MODE_X1 = 1,
+ PEX_BUS_MODE_X4 = 2,
+ PEX_BUS_MODE_X8 = 3
+} MV_PEX_UNIT_CFG;
+
+typedef enum pex_type {
+ MV_PEX_ROOT_COMPLEX, /* root complex device */
+ MV_PEX_END_POINT /* end point device */
+} MV_PEX_TYPE;
+
+typedef struct serdes_change_m_phy {
+ MV_BIN_SERDES_UNIT_INDX type;
+ u32 reg_low_speed;
+ u32 val_low_speed;
+ u32 reg_hi_speed;
+ u32 val_hi_speed;
+} MV_SERDES_CHANGE_M_PHY;
+
+/*
+ * Configuration per SERDES line. Each nibble is MV_SERDES_LINE_TYPE
+ */
+typedef struct board_serdes_conf {
+ MV_PEX_TYPE pex_type; /* MV_PEX_ROOT_COMPLEX MV_PEX_END_POINT */
+ u32 line0_7; /* Lines 0 to 7 SERDES MUX one nibble per line */
+ u32 line8_15; /* Lines 8 to 15 SERDES MUX one nibble per line */
+ MV_PEX_UNIT_CFG pex_mode[4];
+
+ /*
+ * Bus speed - one bit per SERDES line:
+ * Low speed (0) High speed (1)
+ * PEX 2.5 G (10 bit) 5 G (20 bit)
+ * SATA 1.5 G 3 G
+ * SGMII 1.25 Gbps 3.125 Gbps
+ */
+ u32 bus_speed;
+
+ MV_SERDES_CHANGE_M_PHY *serdes_m_phy_change;
+} MV_BIN_SERDES_CFG;
+
+
+#define BIN_SERDES_CFG { \
+ {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 0 */ \
+ {0, 1, -1 , -1, -1, -1, -1, -1, 2}, /* Lane 1 */ \
+ {0, 1, -1 , 2, -1, -1, -1, -1, 3}, /* Lane 2 */ \
+ {0, 1, -1 , -1, 2, -1, -1, 3, -1}, /* Lane 3 */ \
+ {0, 1, 2 , -1, -1, 3, -1, -1, 4}, /* Lane 4 */ \
+ {0, 1, 2 , -1, 3, -1, -1, 4, -1}, /* Lane 5 */ \
+ {0, 1, 2 , 4, -1, 3, -1, -1, -1}, /* Lane 6 */ \
+ {0, 1, -1 , 2, -1, -1, 3, -1, 4}, /* Lane 7*/ \
+ {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 8 */ \
+ {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 9 */ \
+ {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 10 */ \
+ {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 11 */ \
+ {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 12 */ \
+ {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 13 */ \
+ {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 14 */ \
+ {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 15 */ \
+}
+
+#endif /* __HIGHSPEED_ENV_SPEC_H */
diff --git a/arch/arm/mvebu-common/u-boot-spl.lds b/arch/arm/mvebu-common/u-boot-spl.lds
new file mode 100644
index 0000000..eee1db4
--- /dev/null
+++ b/arch/arm/mvebu-common/u-boot-spl.lds
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
+ LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+ LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ .text :
+ {
+ __start = .;
+ arch/arm/cpu/armv7/start.o (.text*)
+ *(.text*)
+ *(.vectors)
+ } >.sram
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
+
+ . = ALIGN(4);
+ .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+ . = ALIGN(4);
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*_i2c_*)));
+ } >.sram
+
+ . = ALIGN(4);
+ __image_copy_end = .;
+
+ .end :
+ {
+ *(.__end)
+ }
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_end = .;
+ } >.sdram
+}