diff options
Diffstat (limited to 'arch/arm/mach-uniphier/sbc')
-rw-r--r-- | arch/arm/mach-uniphier/sbc/Makefile | 4 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c | 52 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c | 45 | ||||
-rw-r--r-- | arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c | 48 |
4 files changed, 149 insertions, 0 deletions
diff --git a/arch/arm/mach-uniphier/sbc/Makefile b/arch/arm/mach-uniphier/sbc/Makefile new file mode 100644 index 0000000..68ffd1c --- /dev/null +++ b/arch/arm/mach-uniphier/sbc/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += sbc-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += sbc-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += sbc-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += sbc-ph1-ld4.o diff --git a/arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c b/arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c new file mode 100644 index 0000000..929f50a --- /dev/null +++ b/arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +int ph1_ld4_sbc_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + + /* system bus output enable */ + tmp = readl(PC0CTRL); + tmp &= 0xfffffcff; + writel(tmp, PC0CTRL); + + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); + + if (boot_is_swapped()) { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. + * + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals + */ + writel(0x0000bc01, SBBASE0); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); + } + + return 0; +} diff --git a/arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c b/arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c new file mode 100644 index 0000000..1032c54 --- /dev/null +++ b/arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +int ph1_pro4_sbc_init(const struct uniphier_board_data *bd) +{ + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); + + if (boot_is_swapped()) { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. + * + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals + */ + writel(0x0000bc01, SBBASE0); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); + } + + return 0; +} diff --git a/arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c b/arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c new file mode 100644 index 0000000..fb707be --- /dev/null +++ b/arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +int ph1_sld3_sbc_init(const struct uniphier_board_data *bd) +{ + /* only address/data multiplex mode is supported */ + + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10); + writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11); + writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12); + + if (boot_is_swapped()) { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. + * + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals + */ + writel(0x0000bc01, SBBASE0); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); + } + + sg_set_pinsel(99, 1, 4, 4); /* GPIO26 -> EA24 */ + + return 0; +} |