3 files changed, 46 insertions, 33 deletions
diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile
index 0390506..b88525c 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/Makefile
+++ b/arch/arm/mach-uniphier/ph1-pro4/Makefile
@@ -4,8 +4,10 @@
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
-obj-y += sbc_init.o sg_init.o pll_init.o early_clkrst_init.o \
+obj-y += sg_init.o pll_init.o early_clkrst_init.o \
 	pll_spectrum.o umc_init.o ddrphy_init.o
+obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o
+obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o
 else
 obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o
 obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c
index 4cc5e75..5e75454 100644
--- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c
+++ b/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c
@@ -12,7 +12,6 @@
 
 void sbc_init(void)
 {
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
 	/*
 	 * Only CS1 is connected to support card.
 	 * BKSZ[1:0] should be set to "01".
@@ -41,35 +40,4 @@ void sbc_init(void)
 		writel(0x0000be01, SBBASE0); /* dummy */
 		writel(0x0200be01, SBBASE1);
 	}
-#elif defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-	/* XECS0: boot/sub memory (boot swap = off/on) */
-	writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00);
-	writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01);
-	writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02);
-	writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04);
-
-	/* XECS1: sub/boot memory (boot swap = off/on) */
-	writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10);
-	writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11);
-	writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12);
-	writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
-
-	/* XECS3: peripherals */
-	writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30);
-	writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31);
-	writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32);
-	writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34);
-
-	writel(0x0000bc01, SBBASE0); /* boot memory */
-	writel(0x0400bc01, SBBASE1); /* sub memory */
-	writel(0x0800bf01, SBBASE3); /* peripherals */
-
-	/* enable access to sub memory when boot swap is on */
-	if (boot_is_swapped())
-		sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */
-
-	sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */
-	writel(0x00000001, SG_LOADPINCTRL);
-
-#endif /* CONFIG_XXX_MICRO_SUPPORT_CARD */
 }
diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c
new file mode 100644
index 0000000..67e6d82
--- /dev/null
+++ b/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2011-2015 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <mach/sbc-regs.h>
+#include <mach/sg-regs.h>
+
+void sbc_init(void)
+{
+	/* XECS0: boot/sub memory (boot swap = off/on) */
+	writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00);
+	writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01);
+	writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02);
+	writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04);
+
+	/* XECS1: sub/boot memory (boot swap = off/on) */
+	writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10);
+	writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11);
+	writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12);
+	writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
+
+	/* XECS3: peripherals */
+	writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30);
+	writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31);
+	writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32);
+	writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34);
+
+	writel(0x0000bc01, SBBASE0); /* boot memory */
+	writel(0x0400bc01, SBBASE1); /* sub memory */
+	writel(0x0800bf01, SBBASE3); /* peripherals */
+
+	/* enable access to sub memory when boot swap is on */
+	if (boot_is_swapped())
+		sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */
+
+	sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */
+	writel(0x00000001, SG_LOADPINCTRL);
+}