diff options
Diffstat (limited to 'arch/arm/mach-omap2/omap3/emif4.c')
| -rw-r--r-- | arch/arm/mach-omap2/omap3/emif4.c | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/omap3/emif4.c b/arch/arm/mach-omap2/omap3/emif4.c new file mode 100644 index 0000000..a2aadc9 --- /dev/null +++ b/arch/arm/mach-omap2/omap3/emif4.c @@ -0,0 +1,165 @@ +/* + * Author : + * Vaibhav Hiremath <hvaibhav@ti.com> + * + * Based on mem.c and sdrc.c + * + * Copyright (C) 2010 + * Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/emif4.h> + +DECLARE_GLOBAL_DATA_PTR; +extern omap3_sysinfo sysinfo; + +static emif4_t *emif4_base = (emif4_t *)OMAP34XX_SDRC_BASE; + +/* + * is_mem_sdr - + * - Return 1 if mem type in use is SDR + */ +u32 is_mem_sdr(void) +{ + return 0; +} + +/* + * get_sdr_cs_size - + * - Get size of chip select 0/1 + */ +u32 get_sdr_cs_size(u32 cs) +{ + u32 size = 0; + + /* TODO: Calculate the size based on EMIF4 configuration */ + if (cs == CS0) + size = CONFIG_SYS_CS0_SIZE; + + return size; +} + +/* + * get_sdr_cs_offset - + * - Get offset of cs from cs0 start + */ +u32 get_sdr_cs_offset(u32 cs) +{ + u32 offset = 0; + + return offset; +} + +/* + * do_emif4_init - + * - Init the emif4 module for DDR access + * - Early init routines, called from flash or SRAM. + */ +static void do_emif4_init(void) +{ + unsigned int regval; + /* Set the DDR PHY parameters in PHY ctrl registers */ + regval = (EMIF4_DDR1_READ_LAT | EMIF4_DDR1_PWRDN_DIS | + EMIF4_DDR1_EXT_STRB_DIS); + writel(regval, &emif4_base->ddr_phyctrl1); + writel(regval, &emif4_base->ddr_phyctrl1_shdw); + writel(0, &emif4_base->ddr_phyctrl2); + + /* Reset the DDR PHY and wait till completed */ + regval = readl(&emif4_base->sdram_iodft_tlgc); + regval |= (1<<10); + writel(regval, &emif4_base->sdram_iodft_tlgc); + /*Wait till that bit clears*/ + while ((readl(&emif4_base->sdram_iodft_tlgc) & (1<<10)) == 0x1); + /*Re-verify the DDR PHY status*/ + while ((readl(&emif4_base->sdram_sts) & (1<<2)) == 0x0); + + regval |= (1<<0); + writel(regval, &emif4_base->sdram_iodft_tlgc); + /* Set SDR timing registers */ + regval = (EMIF4_TIM1_T_WTR | EMIF4_TIM1_T_RRD | + EMIF4_TIM1_T_RC | EMIF4_TIM1_T_RAS | + EMIF4_TIM1_T_WR | EMIF4_TIM1_T_RCD | + EMIF4_TIM1_T_RP); + writel(regval, &emif4_base->sdram_time1); + writel(regval, &emif4_base->sdram_time1_shdw); + + regval = (EMIF4_TIM2_T_CKE | EMIF4_TIM2_T_RTP | + EMIF4_TIM2_T_XSRD | EMIF4_TIM2_T_XSNR | + EMIF4_TIM2_T_ODT | EMIF4_TIM2_T_XP); + writel(regval, &emif4_base->sdram_time2); + writel(regval, &emif4_base->sdram_time2_shdw); + + regval = (EMIF4_TIM3_T_RAS_MAX | EMIF4_TIM3_T_RFC); + writel(regval, &emif4_base->sdram_time3); + writel(regval, &emif4_base->sdram_time3_shdw); + + /* Set the PWR control register */ + regval = (EMIF4_PWR_PM_TIM | EMIF4_PWR_LP_MODE | + EMIF4_PWR_DPD_DIS | EMIF4_PWR_IDLE_MODE); + writel(regval, &emif4_base->sdram_pwr_mgmt); + writel(regval, &emif4_base->sdram_pwr_mgmt_shdw); + + /* Set the DDR refresh rate control register */ + regval = (EMIF4_REFRESH_RATE | EMIF4_INITREF_DIS); + writel(regval, &emif4_base->sdram_refresh_ctrl); + writel(regval, &emif4_base->sdram_refresh_ctrl_shdw); + + /* set the SDRAM configuration register */ + regval = (EMIF4_CFG_PGSIZE | EMIF4_CFG_EBANK | + EMIF4_CFG_IBANK | EMIF4_CFG_ROWSIZE | + EMIF4_CFG_CL | EMIF4_CFG_NARROW_MD | + EMIF4_CFG_SDR_DRV | EMIF4_CFG_DDR_DIS_DLL | + EMIF4_CFG_DDR2_DDQS | EMIF4_CFG_DDR_TERM | + EMIF4_CFG_IBANK_POS | EMIF4_CFG_SDRAM_TYP); + writel(regval, &emif4_base->sdram_config); +} + +/* + * dram_init - + * - Sets uboots idea of sdram size + */ +int dram_init(void) +{ + unsigned int size0 = 0, size1 = 0; + + size0 = get_sdr_cs_size(CS0); + /* + * If a second bank of DDR is attached to CS1 this is + * where it can be started. Early init code will init + * memory on CS0. + */ + if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) + size1 = get_sdr_cs_size(CS1); + + gd->ram_size = size0 + size1; + return 0; +} + +void dram_init_banksize (void) +{ + unsigned int size0 = 0, size1 = 0; + + size0 = get_sdr_cs_size(CS0); + size1 = get_sdr_cs_size(CS1); + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = size0; + gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1); + gd->bd->bi_dram[1].size = size1; +} + +/* + * mem_init() - + * - Initialize memory subsystem + */ +void mem_init(void) +{ + do_emif4_init(); +} |