diff options
Diffstat (limited to 'arch/arm/mach-at91/armv7')
| -rw-r--r-- | arch/arm/mach-at91/armv7/Makefile | 16 | ||||
| -rw-r--r-- | arch/arm/mach-at91/armv7/clock.c | 175 | ||||
| -rw-r--r-- | arch/arm/mach-at91/armv7/cpu.c | 76 | ||||
| -rw-r--r-- | arch/arm/mach-at91/armv7/reset.c | 31 | ||||
| -rw-r--r-- | arch/arm/mach-at91/armv7/sama5d3_devices.c | 218 | ||||
| -rw-r--r-- | arch/arm/mach-at91/armv7/sama5d4_devices.c | 93 | ||||
| -rw-r--r-- | arch/arm/mach-at91/armv7/timer.c | 124 |
7 files changed, 733 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/armv7/Makefile b/arch/arm/mach-at91/armv7/Makefile new file mode 100644 index 0000000..f4f35a4 --- /dev/null +++ b/arch/arm/mach-at91/armv7/Makefile @@ -0,0 +1,16 @@ +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2013 +# Bo Shen <voice.shen@atmel.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_SAMA5D3) += sama5d3_devices.o +obj-$(CONFIG_SAMA5D4) += sama5d4_devices.o +obj-y += clock.o +obj-y += cpu.o +obj-y += reset.o +obj-y += timer.o diff --git a/arch/arm/mach-at91/armv7/clock.c b/arch/arm/mach-at91/armv7/clock.c new file mode 100644 index 0000000..0bf453e --- /dev/null +++ b/arch/arm/mach-at91/armv7/clock.c @@ -0,0 +1,175 @@ +/* + * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c] + * + * Copyright (C) 2005 David Brownell + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> + +#if !defined(CONFIG_AT91FAMILY) +# error You need to define CONFIG_AT91FAMILY in your board config! +#endif + +DECLARE_GLOBAL_DATA_PTR; + +static unsigned long at91_css_to_rate(unsigned long css) +{ + switch (css) { + case AT91_PMC_MCKR_CSS_SLOW: + return CONFIG_SYS_AT91_SLOW_CLOCK; + case AT91_PMC_MCKR_CSS_MAIN: + return gd->arch.main_clk_rate_hz; + case AT91_PMC_MCKR_CSS_PLLA: + return gd->arch.plla_rate_hz; + } + + return 0; +} + +static u32 at91_pll_rate(u32 freq, u32 reg) +{ + unsigned mul, div; + + div = reg & 0xff; + mul = (reg >> 18) & 0x7f; + if (div && mul) { + freq /= div; + freq *= mul + 1; + } else { + freq = 0; + } + + return freq; +} + +int at91_clock_init(unsigned long main_clock) +{ + unsigned freq, mckr; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; +#ifndef CONFIG_SYS_AT91_MAIN_CLOCK + unsigned tmp; + /* + * When the bootloader initialized the main oscillator correctly, + * there's no problem using the cycle counter. But if it didn't, + * or when using oscillator bypass mode, we must be told the speed + * of the main clock. + */ + if (!main_clock) { + do { + tmp = readl(&pmc->mcfr); + } while (!(tmp & AT91_PMC_MCFR_MAINRDY)); + tmp &= AT91_PMC_MCFR_MAINF_MASK; + main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16); + } +#endif + gd->arch.main_clk_rate_hz = main_clock; + + /* report if PLLA is more than mildly overclocked */ + gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar)); + + /* + * MCK and CPU derive from one of those primary clocks. + * For now, assume this parentage won't change. + */ + mckr = readl(&pmc->mckr); + + /* plla divisor by 2 */ + if (mckr & (1 << 12)) + gd->arch.plla_rate_hz >>= 1; + + gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK); + freq = gd->arch.mck_rate_hz; + + /* prescale */ + freq >>= mckr & AT91_PMC_MCKR_PRES_MASK; + + switch (mckr & AT91_PMC_MCKR_MDIV_MASK) { + case AT91_PMC_MCKR_MDIV_2: + gd->arch.mck_rate_hz = freq / 2; + break; + case AT91_PMC_MCKR_MDIV_3: + gd->arch.mck_rate_hz = freq / 3; + break; + case AT91_PMC_MCKR_MDIV_4: + gd->arch.mck_rate_hz = freq / 4; + break; + default: + break; + } + + gd->arch.cpu_clk_rate_hz = freq; + + return 0; +} + +void at91_plla_init(u32 pllar) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + writel(pllar, &pmc->pllar); + while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY))) + ; +} + +void at91_mck_init(u32 mckr) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 tmp; + + tmp = readl(&pmc->mckr); + tmp &= ~(AT91_PMC_MCKR_CSS_MASK | + AT91_PMC_MCKR_PRES_MASK | + AT91_PMC_MCKR_MDIV_MASK | + AT91_PMC_MCKR_PLLADIV_2); +#ifdef CPU_HAS_H32MXDIV + tmp &= ~AT91_PMC_MCKR_H32MXDIV; +#endif + + tmp |= mckr & (AT91_PMC_MCKR_CSS_MASK | + AT91_PMC_MCKR_PRES_MASK | + AT91_PMC_MCKR_MDIV_MASK | + AT91_PMC_MCKR_PLLADIV_2); +#ifdef CPU_HAS_H32MXDIV + tmp |= mckr & AT91_PMC_MCKR_H32MXDIV; +#endif + + writel(tmp, &pmc->mckr); + + while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) + ; +} + +void at91_periph_clk_enable(int id) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 regval; + + if (id > AT91_PMC_PCR_PID_MASK) + return; + + regval = AT91_PMC_PCR_EN | AT91_PMC_PCR_CMD_WRITE | id; + + writel(regval, &pmc->pcr); +} + +void at91_periph_clk_disable(int id) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 regval; + + if (id > AT91_PMC_PCR_PID_MASK) + return; + + regval = AT91_PMC_PCR_CMD_WRITE | id; + + writel(regval, &pmc->pcr); +} diff --git a/arch/arm/mach-at91/armv7/cpu.c b/arch/arm/mach-at91/armv7/cpu.c new file mode 100644 index 0000000..8d86f97 --- /dev/null +++ b/arch/arm/mach-at91/armv7/cpu.c @@ -0,0 +1,76 @@ +/* + * (C) Copyright 2010 + * Reinhard Meyer, reinhard.meyer@emk-elektronik.de + * (C) Copyright 2009 + * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * (C) Copyright 2013 + * Bo Shen <voice.shen@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_dbu.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_pit.h> +#include <asm/arch/at91_gpbr.h> +#include <asm/arch/clk.h> + +#ifndef CONFIG_SYS_AT91_MAIN_CLOCK +#define CONFIG_SYS_AT91_MAIN_CLOCK 0 +#endif + +int arch_cpu_init(void) +{ + return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); +} + +void arch_preboot_os(void) +{ + ulong cpiv; + at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; + + cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir)); + + /* + * Disable PITC + * Add 0x1000 to current counter to stop it faster + * without waiting for wrapping back to 0 + */ + writel(cpiv + 0x1000, &pit->mr); +} + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + char buf[32]; + + printf("CPU: %s\n", get_cpu_name()); + printf("Crystal frequency: %8s MHz\n", + strmhz(buf, get_main_clk_rate())); + printf("CPU clock : %8s MHz\n", + strmhz(buf, get_cpu_clk_rate())); + printf("Master clock : %8s MHz\n", + strmhz(buf, get_mck_clk_rate())); + + return 0; +} +#endif + +void enable_caches(void) +{ + icache_enable(); + dcache_enable(); +} + +unsigned int get_chip_id(void) +{ + return readl(ATMEL_BASE_DBGU + AT91_DBU_CIDR) & ~AT91_DBU_CIDR_MASK; +} + +unsigned int get_extension_chip_id(void) +{ + return readl(ATMEL_BASE_DBGU + AT91_DBU_EXID); +} diff --git a/arch/arm/mach-at91/armv7/reset.c b/arch/arm/mach-at91/armv7/reset.c new file mode 100644 index 0000000..b30e79b --- /dev/null +++ b/arch/arm/mach-at91/armv7/reset.c @@ -0,0 +1,31 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2013 + * Bo Shen <voice.shen@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_rstc.h> + +/* Reset the cpu by telling the reset controller to do so */ +void reset_cpu(ulong ignored) +{ + at91_rstc_t *rstc = (at91_rstc_t *)ATMEL_BASE_RSTC; + + writel(AT91_RSTC_KEY + | AT91_RSTC_CR_PROCRST /* Processor Reset */ + | AT91_RSTC_CR_PERRST /* Peripheral Reset */ +#ifdef CONFIG_AT91RESET_EXTRST + | AT91_RSTC_CR_EXTRST /* External Reset (assert nRST pin) */ +#endif + , &rstc->cr); + /* never reached */ + do { } while (1); +} diff --git a/arch/arm/mach-at91/armv7/sama5d3_devices.c b/arch/arm/mach-at91/armv7/sama5d3_devices.c new file mode 100644 index 0000000..78ecfc8 --- /dev/null +++ b/arch/arm/mach-at91/armv7/sama5d3_devices.c @@ -0,0 +1,218 @@ +/* + * Copyright (C) 2012-2013 Atmel Corporation + * Bo Shen <voice.shen@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sama5d3.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> +#include <asm/arch/gpio.h> +#include <asm/io.h> + +unsigned int has_emac() +{ + return cpu_is_sama5d31() || cpu_is_sama5d35() || cpu_is_sama5d36(); +} + +unsigned int has_gmac() +{ + return !cpu_is_sama5d31(); +} + +unsigned int has_lcdc() +{ + return !cpu_is_sama5d35(); +} + +char *get_cpu_name() +{ + unsigned int extension_id = get_extension_chip_id(); + + if (cpu_is_sama5d3()) + switch (extension_id) { + case ARCH_EXID_SAMA5D31: + return "SAMA5D31"; + case ARCH_EXID_SAMA5D33: + return "SAMA5D33"; + case ARCH_EXID_SAMA5D34: + return "SAMA5D34"; + case ARCH_EXID_SAMA5D35: + return "SAMA5D35"; + case ARCH_EXID_SAMA5D36: + return "SAMA5D36"; + default: + return "Unknown CPU type"; + } + else + return "Unknown CPU type"; +} + +void at91_serial0_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTD, 18, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTD, 17, 0); /* RXD0 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_USART0); +} + +void at91_serial1_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 29, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTB, 28, 0); /* RXD1 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_USART1); +} + +void at91_serial2_hw_init(void) +{ + at91_set_b_periph(AT91_PIO_PORTE, 26, 1); /* TXD2 */ + at91_set_b_periph(AT91_PIO_PORTE, 25, 0); /* RXD2 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_USART2); +} + +void at91_seriald_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 31, 1); /* DTXD */ + at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* DRXD */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_DBGU); +} + +#if defined(CONFIG_ATMEL_SPI) +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_set_a_periph(AT91_PIO_PORTD, 10, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTD, 11, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTD, 12, 0); /* SPI0_SPCK */ + + if (cs_mask & (1 << 0)) + at91_set_pio_output(AT91_PIO_PORTD, 13, 1); + if (cs_mask & (1 << 1)) + at91_set_pio_output(AT91_PIO_PORTD, 14, 1); + if (cs_mask & (1 << 2)) + at91_set_pio_output(AT91_PIO_PORTD, 15, 1); + if (cs_mask & (1 << 3)) + at91_set_pio_output(AT91_PIO_PORTD, 16, 1); + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_SPI0); +} +#endif + +#ifdef CONFIG_GENERIC_ATMEL_MCI +void at91_mci_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTD, 0, 0); /* MCI0 CMD */ + at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* MCI0 DA0 */ + at91_set_a_periph(AT91_PIO_PORTD, 2, 0); /* MCI0 DA1 */ + at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* MCI0 DA2 */ + at91_set_a_periph(AT91_PIO_PORTD, 4, 0); /* MCI0 DA3 */ +#ifdef CONFIG_ATMEL_MCI_8BIT + at91_set_a_periph(AT91_PIO_PORTD, 5, 0); /* MCI0 DA4 */ + at91_set_a_periph(AT91_PIO_PORTD, 6, 0); /* MCI0 DA5 */ + at91_set_a_periph(AT91_PIO_PORTD, 7, 0); /* MCI0 DA6 */ + at91_set_a_periph(AT91_PIO_PORTD, 8, 0); /* MCI0 DA7 */ +#endif + at91_set_a_periph(AT91_PIO_PORTD, 9, 0); /* MCI0 CLK */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_MCI0); +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* ETXCK_EREFCK */ + at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* EMDC */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_EMAC); +} + +void at91_gmac_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* GTX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* GTX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* GTX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* GTX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* GRX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* GRX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* GRX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* GRX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* GTXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* GTXEN */ + + at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* GRXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* GRXER */ + + at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* GMDC */ + at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* GMDIO */ + at91_set_a_periph(AT91_PIO_PORTB, 18, 0); /* G125CK */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_GMAC); +} +#endif + +#ifdef CONFIG_LCD +void at91_lcd_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ + at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ + at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ + at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ + at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ + at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ + + /* The lower 16-bit of LCD only available on Port A */ + at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */ + at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ + at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ + at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ + at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ + at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ + at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD8 */ + at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD9 */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ + at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ + at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_LCDC); +} +#endif + +#ifdef CONFIG_USB_GADGET_ATMEL_USBA +void at91_udp_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + /* Enable UPLL clock */ + writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); + /* Enable UDPHS clock */ + at91_periph_clk_enable(ATMEL_ID_UDPHS); +} +#endif diff --git a/arch/arm/mach-at91/armv7/sama5d4_devices.c b/arch/arm/mach-at91/armv7/sama5d4_devices.c new file mode 100644 index 0000000..ef39cb7 --- /dev/null +++ b/arch/arm/mach-at91/armv7/sama5d4_devices.c @@ -0,0 +1,93 @@ +/* + * Copyright (C) 2014 Atmel + * Bo Shen <voice.shen@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> +#include <asm/arch/sama5_matrix.h> +#include <asm/arch/sama5_sfr.h> +#include <asm/arch/sama5d4.h> + +char *get_cpu_name() +{ + unsigned int extension_id = get_extension_chip_id(); + + if (cpu_is_sama5d4()) + switch (extension_id) { + case ARCH_EXID_SAMA5D41: + return "SAMA5D41"; + case ARCH_EXID_SAMA5D42: + return "SAMA5D42"; + case ARCH_EXID_SAMA5D43: + return "SAMA5D43"; + case ARCH_EXID_SAMA5D44: + return "SAMA5D44"; + default: + return "Unknown CPU type"; + } + else + return "Unknown CPU type"; +} + +#ifdef CONFIG_USB_GADGET_ATMEL_USBA +void at91_udp_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + /* Enable UPLL clock */ + writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); + /* Enable UDPHS clock */ + at91_periph_clk_enable(ATMEL_ID_UDPHS); +} +#endif + +#ifdef CONFIG_SPL_BUILD +void matrix_init(void) +{ + struct atmel_matrix *h64mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX0; + struct atmel_matrix *h32mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX1; + int i; + + /* Disable the write protect */ + writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr); + writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr); + + /* DDR port 1 ~ poart 7, slave number is: 4 ~ 10 */ + for (i = 4; i <= 10; i++) { + writel(0x000f0f0f, &h64mx->ssr[i]); + writel(0x0000ffff, &h64mx->sassr[i]); + writel(0x0000000f, &h64mx->srtsr[i]); + } + + /* CS3 */ + writel(0x00c0c0c0, &h32mx->ssr[3]); + writel(0xff000000, &h32mx->sassr[3]); + writel(0xff000000, &h32mx->srtsr[3]); + + /* NFC SRAM */ + writel(0x00010101, &h32mx->ssr[4]); + writel(0x00000001, &h32mx->sassr[4]); + writel(0x00000001, &h32mx->srtsr[4]); + + /* Enable the write protect */ + writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr); + writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr); +} + +void redirect_int_from_saic_to_aic(void) +{ + struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR; + u32 key32; + + if (!(readl(&sfr->aicredir) & ATMEL_SFR_AICREDIR_NSAIC)) { + key32 = readl(&sfr->sn1) ^ ATMEL_SFR_AICREDIR_KEY; + writel((key32 | ATMEL_SFR_AICREDIR_NSAIC), &sfr->aicredir); + } +} +#endif diff --git a/arch/arm/mach-at91/armv7/timer.c b/arch/arm/mach-at91/armv7/timer.c new file mode 100644 index 0000000..19bf80b --- /dev/null +++ b/arch/arm/mach-at91/armv7/timer.c @@ -0,0 +1,124 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2013 + * Bo Shen <voice.shen@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_pit.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> +#include <div64.h> + +#if !defined(CONFIG_AT91FAMILY) +# error You need to define CONFIG_AT91FAMILY in your board config! +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* + * We're using the SAMA5D3x PITC in 32 bit mode, by + * setting the 20 bit counter period to its maximum (0xfffff). + * (See the relevant data sheets to understand that this really works) + * + * We do also mimic the typical powerpc way of incrementing + * two 32 bit registers called tbl and tbu. + * + * Those registers increment at 1/16 the main clock rate. + */ + +#define TIMER_LOAD_VAL 0xfffff + +static inline unsigned long long tick_to_time(unsigned long long tick) +{ + tick *= CONFIG_SYS_HZ; + do_div(tick, gd->arch.timer_rate_hz); + + return tick; +} + +static inline unsigned long long usec_to_tick(unsigned long long usec) +{ + usec *= gd->arch.timer_rate_hz; + do_div(usec, 1000000); + + return usec; +} + +/* + * Use the PITC in full 32 bit incrementing mode + */ +int timer_init(void) +{ + at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; + + /* Enable PITC Clock */ + at91_periph_clk_enable(ATMEL_ID_PIT); + + /* Enable PITC */ + writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr); + + gd->arch.timer_rate_hz = get_pit_clk_rate() / 16; + + gd->arch.tbu = 0; + gd->arch.tbl = 0; + + return 0; +} + +/* + * Get the current 64 bit timer tick count + */ +unsigned long long get_ticks(void) +{ + at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; + + ulong now = readl(&pit->piir); + + /* increment tbu if tbl has rolled over */ + if (now < gd->arch.tbl) + gd->arch.tbu++; + gd->arch.tbl = now; + return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; +} + +void __udelay(unsigned long usec) +{ + unsigned long long start; + ulong tmo; + + start = get_ticks(); /* get current timestamp */ + tmo = usec_to_tick(usec); /* convert usecs to ticks */ + while ((get_ticks() - start) < tmo) + ; /* loop till time has passed */ +} + +/* + * get_timer(base) can be used to check for timeouts or + * to measure elasped time relative to an event: + * + * ulong start_time = get_timer(0) sets start_time to the current + * time value. + * get_timer(start_time) returns the time elapsed since then. + * + * The time is used in CONFIG_SYS_HZ units! + */ +ulong get_timer(ulong base) +{ + return tick_to_time(get_ticks()) - base; +} + +/* + * Return the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return gd->arch.timer_rate_hz; +} |