1 files changed, 120 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/arm926ejs/timer.c b/arch/arm/mach-at91/arm926ejs/timer.c
new file mode 100644
index 0000000..b0b7fb9
--- /dev/null
+++ b/arch/arm/mach-at91/arm926ejs/timer.c
@@ -0,0 +1,120 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+#include <div64.h>
+
+#if !defined(CONFIG_AT91FAMILY)
+# error You need to define CONFIG_AT91FAMILY in your board config!
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by
+ * setting the 20 bit counter period to its maximum (0xfffff).
+ * (See the relevant data sheets to understand that this really works)
+ *
+ * We do also mimic the typical powerpc way of incrementing
+ * two 32 bit registers called tbl and tbu.
+ *
+ * Those registers increment at 1/16 the main clock rate.
+ */
+
+#define TIMER_LOAD_VAL	0xfffff
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+	tick *= CONFIG_SYS_HZ;
+	do_div(tick, gd->arch.timer_rate_hz);
+
+	return tick;
+}
+
+static inline unsigned long long usec_to_tick(unsigned long long usec)
+{
+	usec *= gd->arch.timer_rate_hz;
+	do_div(usec, 1000000);
+
+	return usec;
+}
+
+/*
+ * Use the PITC in full 32 bit incrementing mode
+ */
+int timer_init(void)
+{
+	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+	at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT;
+
+	/* Enable PITC Clock */
+	writel(1 << ATMEL_ID_SYS, &pmc->pcer);
+
+	/* Enable PITC */
+	writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
+
+	gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16;
+	gd->arch.tbu = gd->arch.tbl = 0;
+
+	return 0;
+}
+
+/*
+ * Get the current 64 bit timer tick count
+ */
+unsigned long long get_ticks(void)
+{
+	at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT;
+
+	ulong now = readl(&pit->piir);
+
+	/* increment tbu if tbl has rolled over */
+	if (now < gd->arch.tbl)
+		gd->arch.tbu++;
+	gd->arch.tbl = now;
+	return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
+}
+
+void __udelay(unsigned long usec)
+{
+	unsigned long long start;
+	ulong tmo;
+
+	start = get_ticks();		/* get current timestamp */
+	tmo = usec_to_tick(usec);	/* convert usecs to ticks */
+	while ((get_ticks() - start) < tmo)
+		;			/* loop till time has passed */
+}
+
+/*
+ * get_timer(base) can be used to check for timeouts or
+ * to measure elasped time relative to an event:
+ *
+ * ulong start_time = get_timer(0) sets start_time to the current
+ * time value.
+ * get_timer(start_time) returns the time elapsed since then.
+ *
+ * The time is used in CONFIG_SYS_HZ units!
+ */
+ulong get_timer(ulong base)
+{
+	return tick_to_time(get_ticks()) - base;
+}
+
+/*
+ * Return the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return gd->arch.timer_rate_hz;
+}