diff options
Diffstat (limited to 'arch/arm/lib')
| -rw-r--r-- | arch/arm/lib/Makefile | 20 | ||||
| -rw-r--r-- | arch/arm/lib/board.c | 7 | ||||
| -rw-r--r-- | arch/arm/lib/bootm.c | 47 | ||||
| -rw-r--r-- | arch/arm/lib/crt0.S | 2 | ||||
| -rw-r--r-- | arch/arm/lib/crt0_64.S | 113 | ||||
| -rw-r--r-- | arch/arm/lib/interrupts_64.c | 120 | ||||
| -rw-r--r-- | arch/arm/lib/relocate_64.S | 58 |
7 files changed, 362 insertions, 5 deletions
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 679f19a..321997c 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -17,14 +17,22 @@ lib-y += _umodsi3.o lib-y += div0.o endif -obj-y += crt0.o +ifdef CONFIG_ARM64 +obj-y += crt0_64.o +else +obj-y += crt0.o +endif ifndef CONFIG_SPL_BUILD -obj-y += relocate.o +ifdef CONFIG_ARM64 +obj-y += relocate_64.o +else +obj-y += relocate.o +endif ifndef CONFIG_SYS_GENERIC_BOARD obj-y += board.o endif -obj-y += sections.o +obj-y += sections.o obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o obj-$(CONFIG_CMD_BOOTM) += bootm.o @@ -35,11 +43,17 @@ else obj-$(CONFIG_SPL_FRAMEWORK) += spl.o endif +ifdef CONFIG_ARM64 +obj-y += interrupts_64.o +else obj-y += interrupts.o +endif obj-y += reset.o obj-y += cache.o +ifndef CONFIG_ARM64 obj-y += cache-cp15.o +endif # For EABI conformant tool chains, provide eabi_compat() ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS))) diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 9c72a53..b770e25 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -344,7 +344,7 @@ void board_init_f(ulong bootflag) #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) /* reserve TLB table */ - gd->arch.tlb_size = 4096 * 4; + gd->arch.tlb_size = PGTABLE_SIZE; addr -= gd->arch.tlb_size; /* round down to next 64 kB limit */ @@ -419,6 +419,7 @@ void board_init_f(ulong bootflag) } #endif +#ifndef CONFIG_ARM64 /* setup stackpointer for exeptions */ gd->irq_sp = addr_sp; #ifdef CONFIG_USE_IRQ @@ -431,6 +432,10 @@ void board_init_f(ulong bootflag) /* 8-byte alignment for ABI compliance */ addr_sp &= ~0x07; +#else /* CONFIG_ARM64 */ + /* 16-byte alignment for ABI compliance */ + addr_sp &= ~0x0f; +#endif /* CONFIG_ARM64 */ #else addr_sp += 128; /* leave 32 words for abort-stack */ gd->irq_sp = addr_sp; diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index f476a89..a8295bf 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -196,6 +196,14 @@ static void do_nonsec_virt_switch(void) debug("entered non-secure state\n"); #endif #endif + +#ifdef CONFIG_ARM64 + smp_kick_all_cpus(); + armv8_switch_to_el2(); +#ifdef CONFIG_ARMV8_SWITCH_TO_EL1 + armv8_switch_to_el1(); +#endif +#endif } /* Subcommand: PREP */ @@ -240,6 +248,21 @@ static void boot_prep_linux(bootm_headers_t *images) /* Subcommand: GO */ static void boot_jump_linux(bootm_headers_t *images, int flag) { +#ifdef CONFIG_ARM64 + void (*kernel_entry)(void *fdt_addr); + int fake = (flag & BOOTM_STATE_OS_FAKE_GO); + + kernel_entry = (void (*)(void *fdt_addr))images->ep; + + debug("## Transferring control to Linux (at address %lx)...\n", + (ulong) kernel_entry); + bootstage_mark(BOOTSTAGE_ID_RUN_OS); + + announce_and_cleanup(fake); + + if (!fake) + kernel_entry(images->ft_addr); +#else unsigned long machid = gd->bd->bi_arch_number; char *s; void (*kernel_entry)(int zero, int arch, uint params); @@ -266,6 +289,7 @@ static void boot_jump_linux(bootm_headers_t *images, int flag) if (!fake) kernel_entry(0, machid, r2); +#endif } /* Main Entry point for arm bootm implementation @@ -326,3 +350,26 @@ int bootz_setup(ulong image, ulong *start, ulong *end) } #endif /* CONFIG_CMD_BOOTZ */ + +#if defined(CONFIG_BOOTM_VXWORKS) +void boot_prep_vxworks(bootm_headers_t *images) +{ +#if defined(CONFIG_OF_LIBFDT) + int off; + + if (images->ft_addr) { + off = fdt_path_offset(images->ft_addr, "/memory"); + if (off < 0) { + if (arch_fixup_memory_node(images->ft_addr)) + puts("## WARNING: fixup memory failed!\n"); + } + } +#endif + cleanup_before_linux(); +} +void boot_jump_vxworks(bootm_headers_t *images) +{ + /* ARM VxWorks requires device tree physical address to be passed */ + ((void (*)(void *))images->ep)(images->ft_addr); +} +#endif diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index ac54b93..dfc2de9 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -67,7 +67,7 @@ ENTRY(_main) ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) #endif bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - sub sp, #GD_SIZE /* allocate one GD above SP */ + sub sp, sp, #GD_SIZE /* allocate one GD above SP */ bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ mov r9, sp /* GD is above SP */ mov r0, #0 diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S new file mode 100644 index 0000000..7756396 --- /dev/null +++ b/arch/arm/lib/crt0_64.S @@ -0,0 +1,113 @@ +/* + * crt0 - C-runtime startup Code for AArch64 U-Boot + * + * (C) Copyright 2013 + * David Feng <fenghua@phytium.com.cn> + * + * (C) Copyright 2012 + * Albert ARIBAUD <albert.u.boot@aribaud.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <asm-offsets.h> +#include <asm/macro.h> +#include <linux/linkage.h> + +/* + * This file handles the target-independent stages of the U-Boot + * start-up where a C runtime environment is needed. Its entry point + * is _main and is branched into from the target's start.S file. + * + * _main execution sequence is: + * + * 1. Set up initial environment for calling board_init_f(). + * This environment only provides a stack and a place to store + * the GD ('global data') structure, both located in some readily + * available RAM (SRAM, locked cache...). In this context, VARIABLE + * global data, initialized or not (BSS), are UNAVAILABLE; only + * CONSTANT initialized data are available. + * + * 2. Call board_init_f(). This function prepares the hardware for + * execution from system RAM (DRAM, DDR...) As system RAM may not + * be available yet, , board_init_f() must use the current GD to + * store any data which must be passed on to later stages. These + * data include the relocation destination, the future stack, and + * the future GD location. + * + * (the following applies only to non-SPL builds) + * + * 3. Set up intermediate environment where the stack and GD are the + * ones allocated by board_init_f() in system RAM, but BSS and + * initialized non-const data are still not available. + * + * 4. Call relocate_code(). This function relocates U-Boot from its + * current location into the relocation destination computed by + * board_init_f(). + * + * 5. Set up final environment for calling board_init_r(). This + * environment has BSS (initialized to 0), initialized non-const + * data (initialized to their intended value), and stack in system + * RAM. GD has retained values set by board_init_f(). Some CPUs + * have some work left to do at this point regarding memory, so + * call c_runtime_cpu_setup. + * + * 6. Branch to board_init_r(). + */ + +ENTRY(_main) + +/* + * Set up initial C runtime environment and call board_init_f(0). + */ + ldr x0, =(CONFIG_SYS_INIT_SP_ADDR) + sub x0, x0, #GD_SIZE /* allocate one GD above SP */ + bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */ + mov x18, sp /* GD is above SP */ + mov x0, #0 + bl board_init_f + +/* + * Set up intermediate environment (new sp and gd) and call + * relocate_code(addr_moni). Trick here is that we'll return + * 'here' but relocated. + */ + ldr x0, [x18, #GD_START_ADDR_SP] /* x0 <- gd->start_addr_sp */ + bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */ + ldr x18, [x18, #GD_BD] /* x18 <- gd->bd */ + sub x18, x18, #GD_SIZE /* new GD is below bd */ + + adr lr, relocation_return + ldr x9, [x18, #GD_RELOC_OFF] /* x9 <- gd->reloc_off */ + add lr, lr, x9 /* new return address after relocation */ + ldr x0, [x18, #GD_RELOCADDR] /* x0 <- gd->relocaddr */ + b relocate_code + +relocation_return: + +/* + * Set up final (full) environment + */ + bl c_runtime_cpu_setup /* still call old routine */ + +/* + * Clear BSS section + */ + ldr x0, =__bss_start /* this is auto-relocated! */ + ldr x1, =__bss_end /* this is auto-relocated! */ + mov x2, #0 +clear_loop: + str x2, [x0] + add x0, x0, #8 + cmp x0, x1 + b.lo clear_loop + + /* call board_init_r(gd_t *id, ulong dest_addr) */ + mov x0, x18 /* gd_t */ + ldr x1, [x18, #GD_RELOCADDR] /* dest_addr */ + b board_init_r /* PC relative jump */ + + /* NOTREACHED - board_init_r() does not return */ + +ENDPROC(_main) diff --git a/arch/arm/lib/interrupts_64.c b/arch/arm/lib/interrupts_64.c new file mode 100644 index 0000000..b476722 --- /dev/null +++ b/arch/arm/lib/interrupts_64.c @@ -0,0 +1,120 @@ +/* + * (C) Copyright 2013 + * David Feng <fenghua@phytium.com.cn> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/compiler.h> + + +int interrupt_init(void) +{ + return 0; +} + +void enable_interrupts(void) +{ + return; +} + +int disable_interrupts(void) +{ + return 0; +} + +void show_regs(struct pt_regs *regs) +{ + int i; + + printf("ELR: %lx\n", regs->elr); + printf("LR: %lx\n", regs->regs[30]); + for (i = 0; i < 29; i += 2) + printf("x%-2d: %016lx x%-2d: %016lx\n", + i, regs->regs[i], i+1, regs->regs[i+1]); + printf("\n"); +} + +/* + * do_bad_sync handles the impossible case in the Synchronous Abort vector. + */ +void do_bad_sync(struct pt_regs *pt_regs, unsigned int esr) +{ + printf("Bad mode in \"Synchronous Abort\" handler, esr 0x%08x\n", esr); + show_regs(pt_regs); + panic("Resetting CPU ...\n"); +} + +/* + * do_bad_irq handles the impossible case in the Irq vector. + */ +void do_bad_irq(struct pt_regs *pt_regs, unsigned int esr) +{ + printf("Bad mode in \"Irq\" handler, esr 0x%08x\n", esr); + show_regs(pt_regs); + panic("Resetting CPU ...\n"); +} + +/* + * do_bad_fiq handles the impossible case in the Fiq vector. + */ +void do_bad_fiq(struct pt_regs *pt_regs, unsigned int esr) +{ + printf("Bad mode in \"Fiq\" handler, esr 0x%08x\n", esr); + show_regs(pt_regs); + panic("Resetting CPU ...\n"); +} + +/* + * do_bad_error handles the impossible case in the Error vector. + */ +void do_bad_error(struct pt_regs *pt_regs, unsigned int esr) +{ + printf("Bad mode in \"Error\" handler, esr 0x%08x\n", esr); + show_regs(pt_regs); + panic("Resetting CPU ...\n"); +} + +/* + * do_sync handles the Synchronous Abort exception. + */ +void do_sync(struct pt_regs *pt_regs, unsigned int esr) +{ + printf("\"Synchronous Abort\" handler, esr 0x%08x\n", esr); + show_regs(pt_regs); + panic("Resetting CPU ...\n"); +} + +/* + * do_irq handles the Irq exception. + */ +void do_irq(struct pt_regs *pt_regs, unsigned int esr) +{ + printf("\"Irq\" handler, esr 0x%08x\n", esr); + show_regs(pt_regs); + panic("Resetting CPU ...\n"); +} + +/* + * do_fiq handles the Fiq exception. + */ +void do_fiq(struct pt_regs *pt_regs, unsigned int esr) +{ + printf("\"Fiq\" handler, esr 0x%08x\n", esr); + show_regs(pt_regs); + panic("Resetting CPU ...\n"); +} + +/* + * do_error handles the Error exception. + * Errors are more likely to be processor specific, + * it is defined with weak attribute and can be redefined + * in processor specific code. + */ +void __weak do_error(struct pt_regs *pt_regs, unsigned int esr) +{ + printf("\"Error\" handler, esr 0x%08x\n", esr); + show_regs(pt_regs); + panic("Resetting CPU ...\n"); +} diff --git a/arch/arm/lib/relocate_64.S b/arch/arm/lib/relocate_64.S new file mode 100644 index 0000000..7fba9e2 --- /dev/null +++ b/arch/arm/lib/relocate_64.S @@ -0,0 +1,58 @@ +/* + * relocate - common relocation function for AArch64 U-Boot + * + * (C) Copyright 2013 + * Albert ARIBAUD <albert.u.boot@aribaud.net> + * David Feng <fenghua@phytium.com.cn> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm-offsets.h> +#include <config.h> +#include <linux/linkage.h> + +/* + * void relocate_code (addr_moni) + * + * This function relocates the monitor code. + * x0 holds the destination address. + */ +ENTRY(relocate_code) + /* + * Copy u-boot from flash to RAM + */ + ldr x1, =__image_copy_start /* x1 <- SRC &__image_copy_start */ + subs x9, x0, x1 /* x9 <- relocation offset */ + b.eq relocate_done /* skip relocation */ + ldr x2, =__image_copy_end /* x2 <- SRC &__image_copy_end */ + +copy_loop: + ldp x10, x11, [x1], #16 /* copy from source address [x1] */ + stp x10, x11, [x0], #16 /* copy to target address [x0] */ + cmp x1, x2 /* until source end address [x2] */ + b.lo copy_loop + + /* + * Fix .rela.dyn relocations + */ + ldr x2, =__rel_dyn_start /* x2 <- SRC &__rel_dyn_start */ + ldr x3, =__rel_dyn_end /* x3 <- SRC &__rel_dyn_end */ +fixloop: + ldp x0, x1, [x2], #16 /* (x0,x1) <- (SRC location, fixup) */ + ldr x4, [x2], #8 /* x4 <- addend */ + and x1, x1, #0xffffffff + cmp x1, #1027 /* relative fixup? */ + bne fixnext + + /* relative fix: store addend plus offset at dest location */ + add x0, x0, x9 + add x4, x4, x9 + str x4, [x0] +fixnext: + cmp x2, x3 + b.lo fixloop + +relocate_done: + ret +ENDPROC(relocate_code) |