diff options
Diffstat (limited to 'arch/arm/include')
51 files changed, 1089 insertions, 437 deletions
diff --git a/arch/arm/include/asm/arch-armada-xp/config.h b/arch/arm/include/asm/arch-armada-xp/config.h index 00ee775..f9fd424 100644 --- a/arch/arm/include/asm/arch-armada-xp/config.h +++ b/arch/arm/include/asm/arch-armada-xp/config.h @@ -31,7 +31,11 @@ #endif /* CONFIG_SYS_KWD_CONFIG */ /* Add target to build it automatically upon "make" */ +#ifdef CONFIG_SPL +#define CONFIG_BUILD_TARGET "u-boot-spl.kwb" +#else #define CONFIG_BUILD_TARGET "u-boot.kwb" +#endif /* end of 16M scrubbed by training in bootrom */ #define CONFIG_SYS_INIT_SP_ADDR 0x00FF0000 diff --git a/arch/arm/include/asm/arch-armada-xp/cpu.h b/arch/arm/include/asm/arch-armada-xp/cpu.h index 6b60c21..4f5ff96 100644 --- a/arch/arm/include/asm/arch-armada-xp/cpu.h +++ b/arch/arm/include/asm/arch-armada-xp/cpu.h @@ -96,6 +96,9 @@ struct kwgpio_registers { u32 irq_level; }; +/* Needed for dynamic (board-specific) mbus configuration */ +extern struct mvebu_mbus_state mbus_state; + /* * functions */ @@ -103,5 +106,18 @@ unsigned int mvebu_sdram_bar(enum memory_bank bank); unsigned int mvebu_sdram_bs(enum memory_bank bank); void mvebu_sdram_size_adjust(enum memory_bank bank); int mvebu_mbus_probe(struct mbus_win windows[], int count); + +/* + * Highspeed SERDES PHY config init, ported from bin_hdr + * to mainline U-Boot + */ +int serdes_phy_config(void); + +/* + * DDR3 init / training code ported from Marvell bin_hdr. Now + * available in mainline U-Boot in: + * drivers/ddr/mvebu/ + */ +int ddr3_init(void); #endif /* __ASSEMBLY__ */ #endif /* _ARMADA_XP_CPU_H */ diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h index 912e55c..efcd74e 100644 --- a/arch/arm/include/asm/arch-at91/at91_common.h +++ b/arch/arm/include/asm/arch-at91/at91_common.h @@ -33,5 +33,6 @@ void at91_mck_init(u32 mckr); void at91_spl_board_init(void); void at91_disable_wdt(void); void matrix_init(void); +void redirect_int_from_saic_to_aic(void); #endif /* AT91_COMMON_H */ diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h index 53b5b2e..65691ab 100644 --- a/arch/arm/include/asm/arch-at91/at91_pmc.h +++ b/arch/arm/include/asm/arch-at91/at91_pmc.h @@ -157,10 +157,8 @@ typedef struct at91_pmc { #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ -#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */ #define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ #define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ -#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ #define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ #define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ @@ -175,7 +173,7 @@ typedef struct at91_pmc { #define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */ #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ -#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */ +#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x] */ #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ #define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ @@ -210,7 +208,7 @@ typedef struct at91_pmc { #define AT91RM9200_PMC_MDIV_2 (1 << 8) #define AT91RM9200_PMC_MDIV_3 (2 << 8) #define AT91RM9200_PMC_MDIV_4 (3 << 8) -#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ +#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */ #define AT91SAM9_PMC_MDIV_2 (1 << 8) #define AT91SAM9_PMC_MDIV_4 (2 << 8) #define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */ @@ -230,8 +228,7 @@ typedef struct at91_pmc { #define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ #define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ #define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ -#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */ -#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */ +#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock */ #define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ #define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ diff --git a/arch/arm/include/asm/arch-at91/at91_rstc.h b/arch/arm/include/asm/arch-at91/at91_rstc.h index a942342..e4eb3da 100644 --- a/arch/arm/include/asm/arch-at91/at91_rstc.h +++ b/arch/arm/include/asm/arch-at91/at91_rstc.h @@ -13,6 +13,8 @@ #ifndef AT91_RSTC_H #define AT91_RSTC_H +/* Reset Controller Status Register */ +#define AT91_ASM_RSTC_SR (ATMEL_BASE_RSTC + 0x04) #define AT91_ASM_RSTC_MR (ATMEL_BASE_RSTC + 0x08) #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/arch-at91/at91cap9.h b/arch/arm/include/asm/arch-at91/at91cap9.h deleted file mode 100644 index 63870bc..0000000 --- a/arch/arm/include/asm/arch-at91/at91cap9.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * [origin: Linux kernel include/asm-arm/arch-at91/at91cap9.h] - * - * Copyright (C) 2007 Stelian Pop <stelian@popies.net> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2007 Atmel Corporation. - * - * Common definitions. - * Based on AT91CAP9 datasheet revision B (Preliminary). - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef AT91CAP9_H -#define AT91CAP9_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ -#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ -#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ -#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ -#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */ -#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */ -#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */ -#define AT91CAP9_ID_US0 8 /* USART 0 */ -#define AT91CAP9_ID_US1 9 /* USART 1 */ -#define AT91CAP9_ID_US2 10 /* USART 2 */ -#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */ -#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */ -#define AT91CAP9_ID_CAN 13 /* CAN */ -#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */ -#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */ -#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */ -#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */ -#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */ -#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */ -#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */ -#define AT91CAP9_ID_EMAC 22 /* Ethernet */ -#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */ -#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */ -#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */ -#define AT91CAP9_ID_LCDC 26 /* LCD Controller */ -#define AT91CAP9_ID_DMA 27 /* DMA Controller */ -#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */ -#define AT91CAP9_ID_UHP 29 /* USB Host Port */ -#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ -#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ - -#define AT91_PIO_BASE 0xfffff200 -#define AT91_PMC_BASE 0xfffffc00 -#define AT91_RSTC_BASE 0xfffffd00 -#define AT91_PIT_BASE 0xfffffd30 - -/* - * Internal Memory. - */ -#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */ -#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */ - -#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */ - -#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */ -#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */ -#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ - -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - -/* - * Cpu Name - */ -#define CONFIG_SYS_AT91_CPU_NAME "AT91CAP9" - -#endif diff --git a/arch/arm/include/asm/arch-at91/at91cap9_matrix.h b/arch/arm/include/asm/arch-at91/at91cap9_matrix.h deleted file mode 100644 index 009a19d..0000000 --- a/arch/arm/include/asm/arch-at91/at91cap9_matrix.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * [origin: Linux kernel include/asm-arm/arch-at91/at91cap9_matrix.h] - * - * Copyright (C) 2007 Stelian Pop <stelian@popies.net> - * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> - * Copyright (C) 2006 Atmel Corporation. - * - * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91CAP9 datasheet revision B (Preliminary). - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef AT91CAP9_MATRIX_H -#define AT91CAP9_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ -#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ -#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ -#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ -#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ -#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ -#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ -#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ -#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ -#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */ -#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ -#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ -#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ -#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ -#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ -#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ -#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ -#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ -#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */ -#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */ -#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */ -#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */ -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ -#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ -#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ -#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ -#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ -#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ -#define AT91_MATRIX_RCB2 (1 << 2) -#define AT91_MATRIX_RCB3 (1 << 3) -#define AT91_MATRIX_RCB4 (1 << 4) -#define AT91_MATRIX_RCB5 (1 << 5) -#define AT91_MATRIX_RCB6 (1 << 6) -#define AT91_MATRIX_RCB7 (1 << 7) -#define AT91_MATRIX_RCB8 (1 << 8) -#define AT91_MATRIX_RCB9 (1 << 9) -#define AT91_MATRIX_RCB10 (1 << 10) -#define AT91_MATRIX_RCB11 (1 << 11) - -#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */ -#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */ - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1) -#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) -#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) -#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) -#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ -#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */ -#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ -#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) -#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) - -#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */ -#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */ -#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */ - -#endif diff --git a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h index 1b59cc6..d0bf0c2 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h +++ b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h @@ -15,8 +15,6 @@ #include <asm/arch/at91sam9263_matrix.h> #elif defined(CONFIG_AT91SAM9RL) #include <asm/arch/at91sam9rl_matrix.h> -#elif defined(CONFIG_AT91CAP9) -#include <asm/arch/at91cap9_matrix.h> #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) #include <asm/arch/at91sam9g45_matrix.h> #elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5) diff --git a/arch/arm/include/asm/arch-at91/atmel_usba_udc.h b/arch/arm/include/asm/arch-at91/atmel_usba_udc.h index 6f540d2..38b5012 100644 --- a/arch/arm/include/asm/arch-at91/atmel_usba_udc.h +++ b/arch/arm/include/asm/arch-at91/atmel_usba_udc.h @@ -31,7 +31,7 @@ static struct usba_ep_data usba_udc_ep[] = { EP("ep5", 5, 1024, 3, 1, 1), EP("ep6", 6, 1024, 3, 1, 1), }; -#elif defined(CONFIG_SAMA5D3) +#elif defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4) static struct usba_ep_data usba_udc_ep[] = { EP("ep0", 0, 64, 1, 0, 0), EP("ep1", 1, 1024, 3, 1, 0), diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h index bf0a1bd..ff6b71b 100644 --- a/arch/arm/include/asm/arch-at91/hardware.h +++ b/arch/arm/include/asm/arch-at91/hardware.h @@ -23,8 +23,6 @@ # include <asm/arch/at91sam9g45.h> #elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5) # include <asm/arch/at91sam9x5.h> -#elif defined(CONFIG_AT91CAP9) -# include <asm/arch/at91cap9.h> #elif defined(CONFIG_SAMA5D3) # include <asm/arch/sama5d3.h> #elif defined(CONFIG_SAMA5D4) diff --git a/arch/arm/include/asm/arch-at91/sama5_matrix.h b/arch/arm/include/asm/arch-at91/sama5_matrix.h new file mode 100644 index 0000000..e324766 --- /dev/null +++ b/arch/arm/include/asm/arch-at91/sama5_matrix.h @@ -0,0 +1,37 @@ +/* + * Bus Matrix header file for the SAMA5 family + * + * Copyright (C) 2014 Atmel + * Bo Shen <voice.shen@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __SAMA5_MATRIX_H +#define __SAMA5_MATRIX_H + +struct atmel_matrix { + u32 mcfg[16]; /* 0x00 ~ 0x3c: Master Configuration Register */ + u32 scfg[16]; /* 0x40 ~ 0x7c: Slave Configuration Register */ + u32 pras[16][2];/* 0x80 ~ 0xfc: Priority Register A/B */ + u32 res1[20]; /* 0x100 ~ 0x14c */ + u32 meier; /* 0x150: Master Error Interrupt Enable Register */ + u32 meidr; /* 0x154: Master Error Interrupt Disable Register */ + u32 meimr; /* 0x158: Master Error Interrupt Mask Register */ + u32 mesr; /* 0x15c: Master Error Status Register */ + u32 mear[16]; /* 0x160 ~ 0x19c: Master Error Address Register */ + u32 res2[17]; /* 0x1A0 ~ 0x1E0 */ + u32 wpmr; /* 0x1E4: Write Protection Mode Register */ + u32 wpsr; /* 0x1E8: Write Protection Status Register */ + u32 res3[5]; /* 0x1EC ~ 0x1FC */ + u32 ssr[16]; /* 0x200 ~ 0x23c: Security Slave Register */ + u32 sassr[16]; /* 0x240 ~ 0x27c: Security Areas Split Slave Register */ + u32 srtsr[16]; /* 0x280 ~ 0x2bc: Security Region Top Slave */ + u32 spselr[3]; /* 0x2c0 ~ 0x2c8: Security Peripheral Select Register */ +}; + +/* Bit field in WPMR */ +#define ATMEL_MATRIX_WPMR_WPKEY 0x4D415400 +#define ATMEL_MATRIX_WPMR_WPEN 0x00000001 + +#endif diff --git a/arch/arm/include/asm/arch-at91/sama5_sfr.h b/arch/arm/include/asm/arch-at91/sama5_sfr.h new file mode 100644 index 0000000..3081d37 --- /dev/null +++ b/arch/arm/include/asm/arch-at91/sama5_sfr.h @@ -0,0 +1,38 @@ +/* + * Special Function Register (SFR) + * + * Copyright (C) 2014 Atmel + * Bo Shen <voice.shen@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __SAMA5_SFR_H +#define __SAMA5_SFR_H + +struct atmel_sfr { + u32 reserved1; /* 0x00 */ + u32 ddrcfg; /* 0x04: DDR Configuration Register */ + u32 reserved2; /* 0x08 */ + u32 reserved3; /* 0x0c */ + u32 ohciicr; /* 0x10: OHCI Interrupt Configuration Register */ + u32 ohciisr; /* 0x14: OHCI Interrupt Status Register */ + u32 reserved4[4]; /* 0x18 ~ 0x24 */ + u32 secure; /* 0x28: Security Configuration Register */ + u32 reserved5[5]; /* 0x2c ~ 0x3c */ + u32 ebicfg; /* 0x40: EBI Configuration Register */ + u32 reserved6[2]; /* 0x44 ~ 0x48 */ + u32 sn0; /* 0x4c */ + u32 sn1; /* 0x50 */ + u32 aicredir; /* 0x54 */ +}; + +/* Bit field in DDRCFG */ +#define ATMEL_SFR_DDRCFG_FDQIEN 0x00010000 +#define ATMEL_SFR_DDRCFG_FDQSIEN 0x00020000 + +/* Bit field in AICREDIR */ +#define ATMEL_SFR_AICREDIR_KEY 0x5F67B102 +#define ATMEL_SFR_AICREDIR_NSAIC 0x00000001 + +#endif diff --git a/arch/arm/include/asm/arch-at91/sama5d4.h b/arch/arm/include/asm/arch-at91/sama5d4.h index d851568..f30cb5f 100644 --- a/arch/arm/include/asm/arch-at91/sama5d4.h +++ b/arch/arm/include/asm/arch-at91/sama5d4.h @@ -126,6 +126,8 @@ #define ATMEL_BASE_ADC 0xfc034000 #define ATMEL_BASE_TWI3 0xfc038000 +#define ATMEL_BASE_MATRIX1 0xfc054000 + #define ATMEL_BASE_SMC 0xfc05c000 #define ATMEL_BASE_PMECC (ATMEL_BASE_SMC + 0x070) #define ATMEL_BASE_PMERRLOC (ATMEL_BASE_SMC + 0x500) diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h index 0b91ef6..d0ae757 100644 --- a/arch/arm/include/asm/arch-exynos/pinmux.h +++ b/arch/arm/include/asm/arch-exynos/pinmux.h @@ -23,6 +23,9 @@ enum { /* Flags for SROM controller */ PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */ PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */ + + /* Flags for I2C */ + PINMUX_FLAG_HS_MODE = 1 << 1, /* I2C High Speed Mode */ }; /** diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index 5e934da..7915518 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -97,8 +97,13 @@ #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0 #define CONFIG_SYS_FSL_SEC_COMPAT 5 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_SYS_FSL_ERRATUM_A008378 #else #error SoC not defined #endif +#define FSL_IFC_COMPAT "fsl,ifc" +#define FSL_QSPI_COMPAT "fsl,ls1-qspi" +#define FSL_DSPI_COMPAT "fsl,vf610-dspi" + #endif /* _ASM_ARMV7_LS102XA_CONFIG_ */ diff --git a/arch/arm/include/asm/arch-uniphier/gpio.h b/arch/arm/include/asm/arch-ls102xa/gpio.h index 1fc4e19..b704436 100644 --- a/arch/arm/include/asm/arch-uniphier/gpio.h +++ b/arch/arm/include/asm/arch-ls102xa/gpio.h @@ -1,6 +1,15 @@ /* + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* * Dummy header file to enable CONFIG_OF_CONTROL. * If CONFIG_OF_CONTROL is enabled, lib/fdtdec.c is compiled. * It includes <asm/arch/gpio.h> via <asm/gpio.h>, so those SoCs that enable - * OF_CONTROL must have arch/gpio.h even if GPIO is not supported. + * OF_CONTROL must have arch/gpio.h. */ + +#ifndef __ASM_ARCH_LS102XA_GPIO_H_ +#define __ASM_ARCH_LS102XA_GPIO_H_ + +#endif diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index 697d4ca..f70d568 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -105,6 +105,8 @@ struct ccsr_gur { #define SCFG_ETSECDMAMCR_LE_BD_FR 0xf8001a0f #define SCFG_ETSECCMCR_GE2_CLK125 0x04000000 +#define SCFG_ETSECCMCR_GE0_CLK125 0x00000000 +#define SCFG_ETSECCMCR_GE1_CLK125 0x08000000 #define SCFG_PIXCLKCR_PXCKEN 0x80000000 #define SCFG_QSPI_CLKSEL 0xc0100000 @@ -456,6 +458,8 @@ struct ccsr_ddr { #define CCI400_CTRLORD_TERM_BARRIER 0x00000008 #define CCI400_CTRLORD_EN_BARRIER 0 #define CCI400_SHAORD_NON_SHAREABLE 0x00000002 +#define CCI400_DVM_MESSAGE_REQ_EN 0x00000002 +#define CCI400_SNOOP_REQ_EN 0x00000001 /* CCI-400 registers */ struct ccsr_cci400 { diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h index 0b78c1c..3ce270c 100644 --- a/arch/arm/include/asm/arch-omap3/mem.h +++ b/arch/arm/include/asm/arch-omap3/mem.h @@ -249,6 +249,49 @@ enum { #define MICRON_RASWIDTH_200 14 #define MICRON_V_MCFG_200(size) MCFG((size), MICRON_RASWIDTH_200) +/* Samsung K4X51163PG - FGC6 (165MHz optimized) 6.06ns - from 2010.90 src */ +#define SAMSUNG_TDAL_165 5 +#define SAMSUNG_TDPL_165 2 +#define SAMSUNG_TRRD_165 2 +#define SAMSUNG_TRCD_165 3 +#define SAMSUNG_TRP_165 3 +#define SAMSUNG_TRAS_165 7 +#define SAMSUNG_TRC_165 10 +#define SAMSUNG_TRFC_165 12 + +#define SAMSUNG_V_ACTIMA_165 \ + ACTIM_CTRLA(SAMSUNG_TRFC_165, SAMSUNG_TRC_165, \ + SAMSUNG_TRAS_165, SAMSUNG_TRP_165, \ + SAMSUNG_TRCD_165, SAMSUNG_TRRD_165, \ + SAMSUNG_TDPL_165, SAMSUNG_TDAL_165) + +#define SAMSUNG_TWTR_165 1 +#define SAMSUNG_TCKE_165 2 +#define SAMSUNG_XSR_165 20 +#define SAMSUNG_TXP_165 5 + +#define SAMSUNG_V_ACTIMB_165 \ + ACTIM_CTRLB(SAMSUNG_TWTR_165, SAMSUNG_TCKE_165, \ + SAMSUNG_TXP_165, SAMSUNG_XSR_165) + +#define SAMSUNG_RASWIDTH_165 14 +#define SAMSUNG_V_MCFG_165(size) \ + V_MCFG_RASWIDTH(SAMSUNG_RASWIDTH_165) | V_MCFG_CASWIDTH_10B | \ + V_MCFG_ADDRMUXLEGACY_FLEX | V_MCFG_RAMSIZE(size) | \ + V_MCFG_BANKALLOCATION_RBC | V_MCFG_RAMTYPE_DDR + +/* TODO: find which register these were taken from */ + +#define SAMSUNG_BL_165 0x2 +#define SAMSUNG_SIL_165 0x0 +#define SAMSUNG_CASL_165 0x3 +#define SAMSUNG_WBST_165 0x0 +#define SAMSUNG_V_MR_165 ((SAMSUNG_WBST_165 << 9) | \ + (SAMSUNG_CASL_165 << 4) | (SAMSUNG_SIL_165 << 3) | \ + (SAMSUNG_BL_165)) + +#define SAMSUNG_SHARING 0x00003700 + /* NUMONYX part of IGEP v2 (165MHz optimized) 6.06ns */ #define NUMONYX_TDAL_165 6 /* Twr/Tck + Trp/tck */ /* 15/6 + 18/6 = 5.5 -> 6 */ diff --git a/arch/arm/include/asm/arch-omap3/mmc_host_def.h b/arch/arm/include/asm/arch-omap3/mmc_host_def.h index 0ba621a..9f2896c 100644 --- a/arch/arm/include/asm/arch-omap3/mmc_host_def.h +++ b/arch/arm/include/asm/arch-omap3/mmc_host_def.h @@ -51,6 +51,7 @@ typedef struct t2 { #define PBIASLITEPWRDNZ0 (1 << 1) #define PBIASSPEEDCTRL0 (1 << 2) #define PBIASLITEPWRDNZ1 (1 << 9) +#define PBIASLITEVMODE0 (1 << 0) #define CTLPROGIO1SPEEDCTRL (1 << 20) diff --git a/arch/arm/include/asm/arch-omap3/mux.h b/arch/arm/include/asm/arch-omap3/mux.h index eba4a5c..3277b40 100644 --- a/arch/arm/include/asm/arch-omap3/mux.h +++ b/arch/arm/include/asm/arch-omap3/mux.h @@ -15,6 +15,12 @@ * PTU - Pull type Up * DIS - Pull type selection is inactive * EN - Pull type selection is active + * SB_LOW - Standby mode configuration: Output low-level + * SB_HI - Standby mode configuration: Output high-level + * SB_HIZ - Standby mode configuration: Output hi-impedence + * SB_PD - Standby mode pull-down enabled + * SB_PU - Standby mode pull-up enabled + * WKEN - Wakeup input enabled * M0 - Mode 0 */ @@ -26,6 +32,13 @@ #define EN (1 << 3) #define DIS (0 << 3) +#define SB_LOW (1 << 9) +#define SB_HI (5 << 9) +#define SB_HIZ (2 << 9) +#define SB_PD (1 << 12) +#define SB_PU (3 << 12) +#define WKEN (1 << 14) + #define M0 0 #define M1 1 #define M2 2 @@ -36,8 +49,8 @@ #define M7 7 /* - * To get the actual address the offset has to added - * with OMAP34XX_CTRL_BASE to get the actual address + * To get the actual address the offset has to be added + * to OMAP34XX_CTRL_BASE */ /*SDRC*/ @@ -78,6 +91,33 @@ #define CONTROL_PADCONF_SDRC_DQS1 0x0074 #define CONTROL_PADCONF_SDRC_DQS2 0x0076 #define CONTROL_PADCONF_SDRC_DQS3 0x0078 +#define CONTROL_PADCONF_SDRC_BA0 0x05A0 +#define CONTROL_PADCONF_SDRC_BA1 0x05A2 +#define CONTROL_PADCONF_SDRC_A0 0x05A4 +#define CONTROL_PADCONF_SDRC_A1 0x05A6 +#define CONTROL_PADCONF_SDRC_A2 0x05A8 +#define CONTROL_PADCONF_SDRC_A3 0x05AA +#define CONTROL_PADCONF_SDRC_A4 0x05AC +#define CONTROL_PADCONF_SDRC_A5 0x05AE +#define CONTROL_PADCONF_SDRC_A6 0x05B0 +#define CONTROL_PADCONF_SDRC_A7 0x05B2 +#define CONTROL_PADCONF_SDRC_A8 0x05B4 +#define CONTROL_PADCONF_SDRC_A9 0x05B6 +#define CONTROL_PADCONF_SDRC_A10 0x05B8 +#define CONTROL_PADCONF_SDRC_A11 0x05BA +#define CONTROL_PADCONF_SDRC_A12 0x05BC +#define CONTROL_PADCONF_SDRC_A13 0x05BE +#define CONTROL_PADCONF_SDRC_A14 0x05C0 +#define CONTROL_PADCONF_SDRC_NCS0 0x05C2 +#define CONTROL_PADCONF_SDRC_NCS1 0x05C4 +#define CONTROL_PADCONF_SDRC_NCLK 0x05C6 +#define CONTROL_PADCONF_SDRC_NRAS 0x05C8 +#define CONTROL_PADCONF_SDRC_NCAS 0x05CA +#define CONTROL_PADCONF_SDRC_NWE 0x05CC +#define CONTROL_PADCONF_SDRC_DM0 0x05CE +#define CONTROL_PADCONF_SDRC_DM1 0x05D0 +#define CONTROL_PADCONF_SDRC_DM2 0x05D2 +#define CONTROL_PADCONF_SDRC_DM3 0x05D4 /*GPMC*/ #define CONTROL_PADCONF_GPMC_A1 0x007A #define CONTROL_PADCONF_GPMC_A2 0x007C @@ -89,6 +129,7 @@ #define CONTROL_PADCONF_GPMC_A8 0x0088 #define CONTROL_PADCONF_GPMC_A9 0x008A #define CONTROL_PADCONF_GPMC_A10 0x008C +#define CONTROL_PADCONF_GPMC_A11 0x0264 #define CONTROL_PADCONF_GPMC_D0 0x008E #define CONTROL_PADCONF_GPMC_D1 0x0090 #define CONTROL_PADCONF_GPMC_D2 0x0092 @@ -323,6 +364,8 @@ #define CONTROL_PADCONF_ETK_D13_ES2 0x05F6 #define CONTROL_PADCONF_ETK_D14_ES2 0x05F8 #define CONTROL_PADCONF_ETK_D15_ES2 0x05FA +#define CONTROL_PADCONF_JTAG_RTCK 0x0A4E +#define CONTROL_PADCONF_JTAG_TDO 0x0A50 /*Die to Die */ #define CONTROL_PADCONF_D2D_MCAD0 0x01E4 #define CONTROL_PADCONF_D2D_MCAD1 0x01E6 @@ -433,6 +476,10 @@ #define CONTROL_PADCONF_SYS_BOOT8 0x0226 /* AM/DM37xx specific */ +#define CONTROL_PADCONF_GPIO112 0x0134 +#define CONTROL_PADCONF_GPIO113 0x0136 +#define CONTROL_PADCONF_GPIO114 0x0138 +#define CONTROL_PADCONF_GPIO115 0x013A #define CONTROL_PADCONF_GPIO127 0x0A54 #define CONTROL_PADCONF_GPIO126 0x0A56 #define CONTROL_PADCONF_GPIO128 0x0A58 diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index 34bd8c5..bcf92fb 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -23,6 +23,7 @@ struct emu_hal_params { /* Board SDRC timing values */ struct board_sdrc_timings { + u32 sharing; u32 mcfg; u32 ctrla; u32 ctrlb; diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h index 0dc584b..f8e5630 100644 --- a/arch/arm/include/asm/arch-omap5/clock.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -236,13 +236,20 @@ #define VDD_MPU_ES2_LOW 880 #define VDD_MM_ES2_LOW 880 -/* TPS659038 Voltage settings in mv for OPP_NOMINAL */ -#define VDD_MPU_DRA752 1090 +/* DRA74x/75x voltage settings in mv for OPP_NOM per DM */ +#define VDD_MPU_DRA752 1100 #define VDD_EVE_DRA752 1060 #define VDD_GPU_DRA752 1060 -#define VDD_CORE_DRA752 1030 +#define VDD_CORE_DRA752 1060 #define VDD_IVA_DRA752 1060 +/* DRA72x voltage settings in mv for OPP_NOM per DM */ +#define VDD_MPU_DRA72x 1100 +#define VDD_EVE_DRA72x 1060 +#define VDD_GPU_DRA72x 1060 +#define VDD_CORE_DRA72x 1060 +#define VDD_IVA_DRA72x 1060 + /* Efuse register offsets for DRA7xx platform */ #define DRA752_EFUSE_BASE 0x4A002000 #define DRA752_EFUSE_REGBITS 16 @@ -284,6 +291,13 @@ #define TPS659038_REG_ADDR_SMPS7 0x33 #define TPS659038_REG_ADDR_SMPS8 0x37 +/* TPS65917 */ +#define TPS65917_I2C_SLAVE_ADDR 0x58 +#define TPS65917_REG_ADDR_SMPS1 0x23 +#define TPS65917_REG_ADDR_SMPS2 0x27 +#define TPS65917_REG_ADDR_SMPS3 0x2F + + /* TPS */ #define TPS62361_I2C_SLAVE_ADDR 0x60 #define TPS62361_REG_ADDR_SET0 0x0 diff --git a/arch/arm/include/asm/arch-pantheon/gpio.h b/arch/arm/include/asm/arch-pantheon/gpio.h new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/arch/arm/include/asm/arch-pantheon/gpio.h diff --git a/arch/arm/include/asm/arch-rmobile/r8a7790.h b/arch/arm/include/asm/arch-rmobile/r8a7790.h index 132d58c..748b802 100644 --- a/arch/arm/include/asm/arch-rmobile/r8a7790.h +++ b/arch/arm/include/asm/arch-rmobile/r8a7790.h @@ -28,6 +28,12 @@ #define MSTP10_BITS 0xFFFEFFE0 #define MSTP11_BITS 0x00000000 +/* SDHI */ +#define CONFIG_SYS_SH_SDHI1_BASE 0xEE120000 +#define CONFIG_SYS_SH_SDHI2_BASE 0xEE140000 +#define CONFIG_SYS_SH_SDHI3_BASE 0xEE160000 +#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 4 + #define R8A7790_CUT_ES2X 2 #define IS_R8A7790_ES2() \ (rmobile_get_cpu_rev_integer() == R8A7790_CUT_ES2X) diff --git a/arch/arm/include/asm/arch-rmobile/r8a7791.h b/arch/arm/include/asm/arch-rmobile/r8a7791.h index d2cbcd7..1d06b65 100644 --- a/arch/arm/include/asm/arch-rmobile/r8a7791.h +++ b/arch/arm/include/asm/arch-rmobile/r8a7791.h @@ -17,6 +17,11 @@ /* SH-I2C */ #define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000 +/* SDHI */ +#define CONFIG_SYS_SH_SDHI1_BASE 0xEE140000 +#define CONFIG_SYS_SH_SDHI2_BASE 0xEE160000 +#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 3 + #define DBSC3_1_QOS_R0_BASE 0xE67A1000 #define DBSC3_1_QOS_R1_BASE 0xE67A1100 #define DBSC3_1_QOS_R2_BASE 0xE67A1200 diff --git a/arch/arm/include/asm/arch-rmobile/r8a7793.h b/arch/arm/include/asm/arch-rmobile/r8a7793.h index 1abdeb7..3efc62a 100644 --- a/arch/arm/include/asm/arch-rmobile/r8a7793.h +++ b/arch/arm/include/asm/arch-rmobile/r8a7793.h @@ -18,6 +18,11 @@ /* SH-I2C */ #define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000 +/* SDHI */ +#define CONFIG_SYS_SH_SDHI1_BASE 0xEE140000 +#define CONFIG_SYS_SH_SDHI2_BASE 0xEE160000 +#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 3 + #define DBSC3_1_QOS_R0_BASE 0xE67A1000 #define DBSC3_1_QOS_R1_BASE 0xE67A1100 #define DBSC3_1_QOS_R2_BASE 0xE67A1200 diff --git a/arch/arm/include/asm/arch-rmobile/r8a7794.h b/arch/arm/include/asm/arch-rmobile/r8a7794.h index d7c9004..6d11fa4 100644 --- a/arch/arm/include/asm/arch-rmobile/r8a7794.h +++ b/arch/arm/include/asm/arch-rmobile/r8a7794.h @@ -27,4 +27,9 @@ #define MSTP10_BITS 0xFFFEFFE0 #define MSTP11_BITS 0x000001C0 +/* SDHI */ +#define CONFIG_SYS_SH_SDHI1_BASE 0xEE140000 +#define CONFIG_SYS_SH_SDHI2_BASE 0xEE160000 +#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 3 + #endif /* __ASM_ARCH_R8A7794_H */ diff --git a/arch/arm/include/asm/arch-rmobile/rcar-base.h b/arch/arm/include/asm/arch-rmobile/rcar-base.h index 23c4bba..d594cd7 100644 --- a/arch/arm/include/asm/arch-rmobile/rcar-base.h +++ b/arch/arm/include/asm/arch-rmobile/rcar-base.h @@ -82,6 +82,9 @@ #define CONFIG_SYS_RCAR_I2C2_BASE 0xE6530000 #define CONFIG_SYS_RCAR_I2C3_BASE 0xE6540000 +/* SDHI */ +#define CONFIG_SYS_SH_SDHI0_BASE 0xEE100000 + #define S3C_BASE 0xE6784000 #define S3C_INT_BASE 0xE6784A00 #define S3C_MEDIA_BASE 0xE6784B00 diff --git a/arch/arm/include/asm/arch-rmobile/sh_sdhi.h b/arch/arm/include/asm/arch-rmobile/sh_sdhi.h new file mode 100644 index 0000000..057bf3f --- /dev/null +++ b/arch/arm/include/asm/arch-rmobile/sh_sdhi.h @@ -0,0 +1,168 @@ +/* + * drivers/mmc/sh-sdhi.h + * + * SD/MMC driver for Reneas rmobile ARM SoCs + * + * Copyright (C) 2013-2014 Renesas Electronics Corporation + * Copyright (C) 2008-2009 Renesas Solutions Corp. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _SH_SDHI_H +#define _SH_SDHI_H + +#define SDHI_CMD (0x0000 >> 1) +#define SDHI_PORTSEL (0x0004 >> 1) +#define SDHI_ARG0 (0x0008 >> 1) +#define SDHI_ARG1 (0x000C >> 1) +#define SDHI_STOP (0x0010 >> 1) +#define SDHI_SECCNT (0x0014 >> 1) +#define SDHI_RSP00 (0x0018 >> 1) +#define SDHI_RSP01 (0x001C >> 1) +#define SDHI_RSP02 (0x0020 >> 1) +#define SDHI_RSP03 (0x0024 >> 1) +#define SDHI_RSP04 (0x0028 >> 1) +#define SDHI_RSP05 (0x002C >> 1) +#define SDHI_RSP06 (0x0030 >> 1) +#define SDHI_RSP07 (0x0034 >> 1) +#define SDHI_INFO1 (0x0038 >> 1) +#define SDHI_INFO2 (0x003C >> 1) +#define SDHI_INFO1_MASK (0x0040 >> 1) +#define SDHI_INFO2_MASK (0x0044 >> 1) +#define SDHI_CLK_CTRL (0x0048 >> 1) +#define SDHI_SIZE (0x004C >> 1) +#define SDHI_OPTION (0x0050 >> 1) +#define SDHI_ERR_STS1 (0x0058 >> 1) +#define SDHI_ERR_STS2 (0x005C >> 1) +#define SDHI_BUF0 (0x0060 >> 1) +#define SDHI_SDIO_MODE (0x0068 >> 1) +#define SDHI_SDIO_INFO1 (0x006C >> 1) +#define SDHI_SDIO_INFO1_MASK (0x0070 >> 1) +#define SDHI_CC_EXT_MODE (0x01B0 >> 1) +#define SDHI_SOFT_RST (0x01C0 >> 1) +#define SDHI_VERSION (0x01C4 >> 1) +#define SDHI_HOST_MODE (0x01C8 >> 1) +#define SDHI_SDIF_MODE (0x01CC >> 1) +#define SDHI_EXT_SWAP (0x01E0 >> 1) +#define SDHI_SD_DMACR (0x0324 >> 1) + +/* SDHI CMD VALUE */ +#define CMD_MASK 0x0000ffff +#define SDHI_APP 0x0040 +#define SDHI_SD_APP_SEND_SCR 0x0073 +#define SDHI_SD_SWITCH 0x1C06 + +/* SDHI_PORTSEL */ +#define USE_1PORT (1 << 8) /* 1 port */ + +/* SDHI_ARG */ +#define ARG0_MASK 0x0000ffff +#define ARG1_MASK 0x0000ffff + +/* SDHI_STOP */ +#define STOP_SEC_ENABLE (1 << 8) + +/* SDHI_INFO1 */ +#define INFO1_RESP_END (1 << 0) +#define INFO1_ACCESS_END (1 << 2) +#define INFO1_CARD_RE (1 << 3) +#define INFO1_CARD_IN (1 << 4) +#define INFO1_ISD0CD (1 << 5) +#define INFO1_WRITE_PRO (1 << 7) +#define INFO1_DATA3_CARD_RE (1 << 8) +#define INFO1_DATA3_CARD_IN (1 << 9) +#define INFO1_DATA3 (1 << 10) + +/* SDHI_INFO2 */ +#define INFO2_CMD_ERROR (1 << 0) +#define INFO2_CRC_ERROR (1 << 1) +#define INFO2_END_ERROR (1 << 2) +#define INFO2_TIMEOUT (1 << 3) +#define INFO2_BUF_ILL_WRITE (1 << 4) +#define INFO2_BUF_ILL_READ (1 << 5) +#define INFO2_RESP_TIMEOUT (1 << 6) +#define INFO2_SDDAT0 (1 << 7) +#define INFO2_BRE_ENABLE (1 << 8) +#define INFO2_BWE_ENABLE (1 << 9) +#define INFO2_CBUSY (1 << 14) +#define INFO2_ILA (1 << 15) +#define INFO2_ALL_ERR (0x807f) + +/* SDHI_INFO1_MASK */ +#define INFO1M_RESP_END (1 << 0) +#define INFO1M_ACCESS_END (1 << 2) +#define INFO1M_CARD_RE (1 << 3) +#define INFO1M_CARD_IN (1 << 4) +#define INFO1M_DATA3_CARD_RE (1 << 8) +#define INFO1M_DATA3_CARD_IN (1 << 9) +#define INFO1M_ALL (0xffff) +#define INFO1M_SET (INFO1M_RESP_END | \ + INFO1M_ACCESS_END | \ + INFO1M_DATA3_CARD_RE | \ + INFO1M_DATA3_CARD_IN) + +/* SDHI_INFO2_MASK */ +#define INFO2M_CMD_ERROR (1 << 0) +#define INFO2M_CRC_ERROR (1 << 1) +#define INFO2M_END_ERROR (1 << 2) +#define INFO2M_TIMEOUT (1 << 3) +#define INFO2M_BUF_ILL_WRITE (1 << 4) +#define INFO2M_BUF_ILL_READ (1 << 5) +#define INFO2M_RESP_TIMEOUT (1 << 6) +#define INFO2M_BRE_ENABLE (1 << 8) +#define INFO2M_BWE_ENABLE (1 << 9) +#define INFO2M_ILA (1 << 15) +#define INFO2M_ALL (0xffff) +#define INFO2M_ALL_ERR (0x807f) + +/* SDHI_CLK_CTRL */ +#define CLK_ENABLE (1 << 8) + +/* SDHI_OPTION */ +#define OPT_BUS_WIDTH_1 (1 << 15) /* bus width = 1 bit */ + +/* SDHI_ERR_STS1 */ +#define ERR_STS1_CRC_ERROR ((1 << 11) | (1 << 10) | (1 << 9) | \ + (1 << 8) | (1 << 5)) +#define ERR_STS1_CMD_ERROR ((1 << 4) | (1 << 3) | (1 << 2) | \ + (1 << 1) | (1 << 0)) + +/* SDHI_ERR_STS2 */ +#define ERR_STS2_RES_TIMEOUT (1 << 0) +#define ERR_STS2_RES_STOP_TIMEOUT ((1 << 0) | (1 << 1)) +#define ERR_STS2_SYS_ERROR ((1 << 6) | (1 << 5) | (1 << 4) | \ + (1 << 3) | (1 << 2) | (1 << 1) | \ + (1 << 0)) + +/* SDHI_SDIO_MODE */ +#define SDIO_MODE_ON (1 << 0) +#define SDIO_MODE_OFF (0 << 0) + +/* SDHI_SDIO_INFO1 */ +#define SDIO_INFO1_IOIRQ (1 << 0) +#define SDIO_INFO1_EXPUB52 (1 << 14) +#define SDIO_INFO1_EXWT (1 << 15) + +/* SDHI_SDIO_INFO1_MASK */ +#define SDIO_INFO1M_CLEAR ((1 << 1) | (1 << 2)) +#define SDIO_INFO1M_ON ((1 << 15) | (1 << 14) | (1 << 2) | \ + (1 << 1) | (1 << 0)) + +/* SDHI_EXT_SWAP */ +#define SET_SWAP ((1 << 6) | (1 << 7)) /* SWAP */ + +/* SDHI_SOFT_RST */ +#define SOFT_RST_ON (0 << 0) +#define SOFT_RST_OFF (1 << 0) + +#define CLKDEV_SD_DATA 25000000 /* 25 MHz */ +#define CLKDEV_HS_DATA 50000000 /* 50 MHz */ +#define CLKDEV_MMC_DATA 20000000 /* 20MHz */ +#define CLKDEV_INIT 400000 /* 100 - 400 KHz */ + +/* For quirk */ +#define SH_SDHI_QUIRK_16BIT_BUF (1) +int sh_sdhi_init(unsigned long addr, int ch, unsigned long quirks); + +#endif /* _SH_SDHI_H */ diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h index 505c363..3e5d999 100644 --- a/arch/arm/include/asm/arch-sunxi/clock.h +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -17,6 +17,8 @@ /* clock control module regs definition */ #if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) #include <asm/arch/clock_sun6i.h> +#elif defined(CONFIG_MACH_SUN9I) +#include <asm/arch/clock_sun9i.h> #else #include <asm/arch/clock_sun4i.h> #endif @@ -24,10 +26,6 @@ #ifndef __ASSEMBLY__ int clock_init(void); int clock_twi_onoff(int port, int state); -void clock_set_pll1(unsigned int hz); -void clock_set_pll3(unsigned int hz); -unsigned int clock_get_pll5p(void); -unsigned int clock_get_pll6(void); void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz); void clock_init_safe(void); void clock_init_uart(void); diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h index 84a9a2b..d297ed0 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h @@ -186,6 +186,7 @@ struct sunxi_ccm_reg { /* ahb clock gate bit offset (second register) */ #define AHB_GATE_OFFSET_GMAC 17 +#define AHB_GATE_OFFSET_DE_FE0 14 #define AHB_GATE_OFFSET_DE_BE0 12 #define AHB_GATE_OFFSET_HDMI 11 #define AHB_GATE_OFFSET_LCD1 5 @@ -266,7 +267,10 @@ struct sunxi_ccm_reg { #define CCM_MMC_CTRL_PLL5 (0x2 << 24) #define CCM_MMC_CTRL_ENABLE (0x1 << 31) +#define CCM_DRAM_GATE_OFFSET_DE_FE1 24 /* Note the order of FE1 and */ +#define CCM_DRAM_GATE_OFFSET_DE_FE0 25 /* FE0 is swapped ! */ #define CCM_DRAM_GATE_OFFSET_DE_BE0 26 +#define CCM_DRAM_GATE_OFFSET_DE_BE1 27 #define CCM_LCD_CH0_CTRL_PLL3 (0 << 24) #define CCM_LCD_CH0_CTRL_PLL7 (1 << 24) @@ -301,6 +305,8 @@ struct sunxi_ccm_reg { #define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2 #define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2) #define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2) +#define CCM_GMAC_CTRL_RX_CLK_DELAY(x) ((x) << 5) +#define CCM_GMAC_CTRL_TX_CLK_DELAY(x) ((x) << 10) #define CCM_USB_CTRL_PHY0_RST (0x1 << 0) #define CCM_USB_CTRL_PHY1_RST (0x1 << 1) @@ -320,4 +326,11 @@ struct sunxi_ccm_reg { #define CCM_DE_CTRL_RST (1 << 30) #define CCM_DE_CTRL_GATE (1 << 31) +#ifndef __ASSEMBLY__ +void clock_set_pll1(unsigned int hz); +void clock_set_pll3(unsigned int hz); +unsigned int clock_get_pll5p(void); +unsigned int clock_get_pll6(void); +#endif + #endif /* _SUNXI_CLOCK_SUN4I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index 4711260..8a80385 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -243,6 +243,8 @@ struct sunxi_ccm_reg { #define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2 #define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2) #define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2) +#define CCM_GMAC_CTRL_RX_CLK_DELAY(x) ((x) << 5) +#define CCM_GMAC_CTRL_TX_CLK_DELAY(x) ((x) << 10) #define MDFS_CLK_DEFAULT 0x81000002 /* PLL6 / 3 */ @@ -320,6 +322,11 @@ struct sunxi_ccm_reg { #define CCM_DE_CTRL_PLL10 (5 << 24) #define CCM_DE_CTRL_GATE (1 << 31) +#ifndef __ASSEMBLY__ +void clock_set_pll1(unsigned int hz); +void clock_set_pll3(unsigned int hz); void clock_set_pll5(unsigned int clk, bool sigma_delta_enable); +unsigned int clock_get_pll6(void); +#endif #endif /* _SUNXI_CLOCK_SUN6I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun9i.h b/arch/arm/include/asm/arch-sunxi/clock_sun9i.h new file mode 100644 index 0000000..c506b0a --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/clock_sun9i.h @@ -0,0 +1,139 @@ +/* + * sun9i clock register definitions + * + * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_CLOCK_SUN9I_H +#define _SUNXI_CLOCK_SUN9I_H + +struct sunxi_ccm_reg { + u32 pll1_c0_cfg; /* 0x00 c0cpu# pll configuration */ + u32 pll2_c1_cfg; /* 0x04 c1cpu# pll configuration */ + u32 pll3_audio_cfg; /* 0x08 audio pll configuration */ + u32 pll4_periph0_cfg; /* 0x0c peripheral0 pll configuration */ + u32 pll5_ve_cfg; /* 0x10 videoengine pll configuration */ + u32 pll6_ddr_cfg; /* 0x14 ddr pll configuration */ + u32 pll7_video0_cfg; /* 0x18 video0 pll configuration */ + u32 pll8_video1_cfg; /* 0x1c video1 pll configuration */ + u32 pll9_gpu_cfg; /* 0x20 gpu pll configuration */ + u32 pll10_de_cfg; /* 0x24 displayengine pll configuration */ + u32 pll11_isp_cfg; /* 0x28 isp pll6 ontrol */ + u32 pll12_periph1_cfg; /* 0x2c peripheral1 pll configuration */ + u8 reserved1[0x20]; /* 0x30 */ + u32 cpu_clk_source; /* 0x50 cpu clk source configuration */ + u32 c0_cfg; /* 0x54 cpu cluster 0 clock configuration */ + u32 c1_cfg; /* 0x58 cpu cluster 1 clock configuration */ + u32 gtbus_cfg; /* 0x5c gtbus clock configuration */ + u32 ahb0_cfg; /* 0x60 ahb0 clock configuration */ + u32 ahb1_cfg; /* 0x64 ahb1 clock configuration */ + u32 ahb2_cfg; /* 0x68 ahb2 clock configuration */ + u8 reserved2[0x04]; /* 0x6c */ + u32 apb0_cfg; /* 0x70 apb0 clock configuration */ + u32 apb1_cfg; /* 0x74 apb1 clock configuration */ + u32 cci400_cfg; /* 0x78 cci400 clock configuration */ + u8 reserved3[0x04]; /* 0x7c */ + u32 ats_cfg; /* 0x80 ats clock configuration */ + u32 trace_cfg; /* 0x84 trace clock configuration */ + u8 reserved4[0xf8]; /* 0x88 */ + u32 clk_output_a; /* 0x180 clk_output_a */ + u32 clk_output_b; /* 0x184 clk_output_a */ + u8 reserved5[0x278]; /* 0x188 */ + + u32 nand0_clk_cfg0; /* 0x400 nand0 clock configuration0 */ + u32 nand0_clk_cfg1; /* 0x404 nand1 clock configuration */ + u8 reserved6[0x08]; /* 0x408 */ + u32 sd0_clk_cfg; /* 0x410 sd0 clock configuration */ + u32 sd1_clk_cfg; /* 0x414 sd1 clock configuration */ + u32 sd2_clk_cfg; /* 0x418 sd2 clock configuration */ + u32 sd3_clk_cfg; /* 0x41c sd3 clock configuration */ + u8 reserved7[0x08]; /* 0x420 */ + u32 ts_clk_cfg; /* 0x428 transport stream clock cfg */ + u32 ss_clk_cfg; /* 0x42c security system clock cfg */ + u32 spi0_clk_cfg; /* 0x430 spi0 clock configuration */ + u32 spi1_clk_cfg; /* 0x434 spi1 clock configuration */ + u32 spi2_clk_cfg; /* 0x438 spi2 clock configuration */ + u32 spi3_clk_cfg; /* 0x43c spi3 clock configuration */ + u8 reserved8[0x50]; /* 0x440 */ + u32 de_clk_cfg; /* 0x490 display engine clock configuration */ + u8 reserved9[0x04]; /* 0x494 */ + u32 mp_clk_cfg; /* 0x498 mp clock configuration */ + u32 lcd0_clk_cfg; /* 0x49c LCD0 module clock */ + u32 lcd1_clk_cfg; /* 0x4a0 LCD1 module clock */ + u8 reserved10[0x1c]; /* 0x4a4 */ + u32 csi_isp_clk_cfg; /* 0x4c0 CSI ISP module clock */ + u32 csi0_clk_cfg; /* 0x4c4 CSI0 module clock */ + u32 csi1_clk_cfg; /* 0x4c8 CSI1 module clock */ + u32 fd_clk_cfg; /* 0x4cc FD module clock */ + u32 ve_clk_cfg; /* 0x4d0 VE module clock */ + u32 avs_clk_cfg; /* 0x4d4 AVS module clock */ + u8 reserved11[0x18]; /* 0x4d8 */ + u32 gpu_core_clk_cfg; /* 0x4f0 GPU core clock config */ + u32 gpu_mem_clk_cfg; /* 0x4f4 GPU memory clock config */ + u32 gpu_axi_clk_cfg; /* 0x4f8 GPU AXI clock config */ + u8 reserved12[0x10]; /* 0x4fc */ + u32 gp_adc_clk_cfg; /* 0x50c General Purpose ADC clk config */ + u8 reserved13[0x70]; /* 0x510 */ + + u32 ahb_gate0; /* 0x580 AHB0 Gating Register */ + u32 ahb_gate1; /* 0x584 AHB1 Gating Register */ + u32 ahb_gate2; /* 0x588 AHB2 Gating Register */ + u8 reserved14[0x04]; /* 0x58c */ + u32 apb0_gate; /* 0x590 APB0 Clock Gating Register */ + u32 apb1_gate; /* 0x594 APB1 Clock Gating Register */ + u8 reserved15[0x08]; /* 0x598 */ + u32 ahb_reset0_cfg; /* 0x5a0 AHB0 Software Reset Register */ + u32 ahb_reset1_cfg; /* 0x5a4 AHB1 Software Reset Register */ + u32 ahb_reset2_cfg; /* 0x5a8 AHB2 Software Reset Register */ + u8 reserved16[0x04]; /* 0x5ac */ + u32 apb0_reset_cfg; /* 0x5b0 Bus Software Reset Register 3 */ + u32 apb1_reset_cfg; /* 0x5b4 Bus Software Reset Register 4 */ +}; + +/* pll4_periph0_cfg */ +#define PLL4_CFG_DEFAULT 0x90002800 /* 960 MHz */ + +#define CCM_PLL4_CTRL_N_SHIFT 8 +#define CCM_PLL4_CTRL_N_MASK (0xff << CCM_PLL4_CTRL_N_SHIFT) +#define CCM_PLL4_CTRL_P_SHIFT 16 +#define CCM_PLL4_CTRL_P_MASK (0x1 << CCM_PLL4_CTRL_P_SHIFT) +#define CCM_PLL4_CTRL_M_SHIFT 18 +#define CCM_PLL4_CTRL_M_MASK (0x1 << CCM_PLL4_CTRL_M_SHIFT) + +/* sd#_clk_cfg fields */ +#define CCM_MMC_CTRL_M(x) ((x) - 1) +#define CCM_MMC_CTRL_OCLK_DLY(x) ((x) << 8) +#define CCM_MMC_CTRL_N(x) ((x) << 16) +#define CCM_MMC_CTRL_SCLK_DLY(x) ((x) << 20) +#define CCM_MMC_CTRL_OSCM24 (0 << 24) +#define CCM_MMC_CTRL_PLL_PERIPH0 (1 << 24) +#define CCM_MMC_CTRL_ENABLE (1 << 31) + +/* ahb_gate0 fields */ +/* On sun9i all sdc-s share their ahb gate, so ignore (x) */ +#define AHB_GATE_OFFSET_MMC(x) 8 + +/* apb1_gate fields */ +#define APB1_GATE_UART_SHIFT 16 +#define APB1_GATE_UART_MASK (0xff << APB1_GATE_UART_SHIFT) +#define APB1_GATE_TWI_SHIFT 0 +#define APB1_GATE_TWI_MASK (0xf << APB1_GATE_TWI_SHIFT) + +/* ahb_reset0_cfg fields */ +/* On sun9i all sdc-s share their ahb reset, so ignore (x) */ +#define AHB_RESET_OFFSET_MMC(x) 8 + +/* apb1_reset_cfg fields */ +#define APB1_RESET_UART_SHIFT 16 +#define APB1_RESET_UART_MASK (0xff << APB1_RESET_UART_SHIFT) +#define APB1_RESET_TWI_SHIFT 0 +#define APB1_RESET_TWI_MASK (0xf << APB1_RESET_TWI_SHIFT) + + +#ifndef __ASSEMBLY__ +unsigned int clock_get_pll4_periph0(void); +#endif + +#endif /* _SUNXI_CLOCK_SUN9I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h index 82b3d46..73583ed 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu.h +++ b/arch/arm/include/asm/arch-sunxi/cpu.h @@ -1,7 +1,5 @@ /* - * (C) Copyright 2007-2011 - * Allwinner Technology Co., Ltd. <www.allwinnertech.com> - * Tom Cubie <tangliang@allwinnertech.com> + * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com> * * SPDX-License-Identifier: GPL-2.0+ */ @@ -9,146 +7,10 @@ #ifndef _SUNXI_CPU_H #define _SUNXI_CPU_H -#define SUNXI_SRAM_A1_BASE 0x00000000 -#define SUNXI_SRAM_A1_SIZE (16 * 1024) /* 16 kiB */ - -#define SUNXI_SRAM_A2_BASE 0x00004000 /* 16 kiB */ -#define SUNXI_SRAM_A3_BASE 0x00008000 /* 13 kiB */ -#define SUNXI_SRAM_A4_BASE 0x0000b400 /* 3 kiB */ -#define SUNXI_SRAM_D_BASE 0x00010000 /* 4 kiB */ -#define SUNXI_SRAM_B_BASE 0x00020000 /* 64 kiB (secure) */ - -#define SUNXI_SRAMC_BASE 0x01c00000 -#define SUNXI_DRAMC_BASE 0x01c01000 -#define SUNXI_DMA_BASE 0x01c02000 -#define SUNXI_NFC_BASE 0x01c03000 -#define SUNXI_TS_BASE 0x01c04000 -#define SUNXI_SPI0_BASE 0x01c05000 -#define SUNXI_SPI1_BASE 0x01c06000 -#define SUNXI_MS_BASE 0x01c07000 -#define SUNXI_TVD_BASE 0x01c08000 -#define SUNXI_CSI0_BASE 0x01c09000 -#define SUNXI_TVE0_BASE 0x01c0a000 -#define SUNXI_EMAC_BASE 0x01c0b000 -#define SUNXI_LCD0_BASE 0x01c0C000 -#define SUNXI_LCD1_BASE 0x01c0d000 -#define SUNXI_VE_BASE 0x01c0e000 -#define SUNXI_MMC0_BASE 0x01c0f000 -#define SUNXI_MMC1_BASE 0x01c10000 -#define SUNXI_MMC2_BASE 0x01c11000 -#define SUNXI_MMC3_BASE 0x01c12000 -#if !defined CONFIG_MACH_SUN6I && !defined CONFIG_MACH_SUN8I -#define SUNXI_USB0_BASE 0x01c13000 -#define SUNXI_USB1_BASE 0x01c14000 -#endif -#define SUNXI_SS_BASE 0x01c15000 -#define SUNXI_HDMI_BASE 0x01c16000 -#define SUNXI_SPI2_BASE 0x01c17000 -#define SUNXI_SATA_BASE 0x01c18000 -#if !defined CONFIG_MACH_SUN6I && !defined CONFIG_MACH_SUN8I -#define SUNXI_PATA_BASE 0x01c19000 -#define SUNXI_ACE_BASE 0x01c1a000 -#define SUNXI_TVE1_BASE 0x01c1b000 -#define SUNXI_USB2_BASE 0x01c1c000 +#if defined(CONFIG_MACH_SUN9I) +#include <asm/arch/cpu_sun9i.h> #else -#define SUNXI_USB0_BASE 0x01c19000 -#define SUNXI_USB1_BASE 0x01c1a000 -#define SUNXI_USB2_BASE 0x01c1b000 +#include <asm/arch/cpu_sun4i.h> #endif -#define SUNXI_CSI1_BASE 0x01c1d000 -#define SUNXI_TZASC_BASE 0x01c1e000 -#define SUNXI_SPI3_BASE 0x01c1f000 - -#define SUNXI_CCM_BASE 0x01c20000 -#define SUNXI_INTC_BASE 0x01c20400 -#define SUNXI_PIO_BASE 0x01c20800 -#define SUNXI_TIMER_BASE 0x01c20c00 -#define SUNXI_SPDIF_BASE 0x01c21000 -#define SUNXI_AC97_BASE 0x01c21400 -#define SUNXI_IR0_BASE 0x01c21800 -#define SUNXI_IR1_BASE 0x01c21c00 - -#define SUNXI_IIS_BASE 0x01c22400 -#define SUNXI_LRADC_BASE 0x01c22800 -#define SUNXI_AD_DA_BASE 0x01c22c00 -#define SUNXI_KEYPAD_BASE 0x01c23000 -#define SUNXI_TZPC_BASE 0x01c23400 -#define SUNXI_SID_BASE 0x01c23800 -#define SUNXI_SJTAG_BASE 0x01c23c00 - -#define SUNXI_TP_BASE 0x01c25000 -#define SUNXI_PMU_BASE 0x01c25400 -#define SUN7I_CPUCFG_BASE 0x01c25c00 - -#define SUNXI_UART0_BASE 0x01c28000 -#define SUNXI_UART1_BASE 0x01c28400 -#define SUNXI_UART2_BASE 0x01c28800 -#define SUNXI_UART3_BASE 0x01c28c00 -#define SUNXI_UART4_BASE 0x01c29000 -#define SUNXI_UART5_BASE 0x01c29400 -#define SUNXI_UART6_BASE 0x01c29800 -#define SUNXI_UART7_BASE 0x01c29c00 -#define SUNXI_PS2_0_BASE 0x01c2a000 -#define SUNXI_PS2_1_BASE 0x01c2a400 - -#define SUNXI_TWI0_BASE 0x01c2ac00 -#define SUNXI_TWI1_BASE 0x01c2b000 -#define SUNXI_TWI2_BASE 0x01c2b400 - -#define SUNXI_CAN_BASE 0x01c2bc00 - -#define SUNXI_SCR_BASE 0x01c2c400 - -#ifndef CONFIG_MACH_SUN6I -#define SUNXI_GPS_BASE 0x01c30000 -#define SUNXI_MALI400_BASE 0x01c40000 -#define SUNXI_GMAC_BASE 0x01c50000 -#else -#define SUNXI_GMAC_BASE 0x01c30000 -#endif - -#define SUNXI_DRAM_COM_BASE 0x01c62000 -#define SUNXI_DRAM_CTL0_BASE 0x01c63000 -#define SUNXI_DRAM_CTL1_BASE 0x01c64000 -#define SUNXI_DRAM_PHY0_BASE 0x01c65000 -#define SUNXI_DRAM_PHY1_BASE 0x01c66000 - -/* module sram */ -#define SUNXI_SRAM_C_BASE 0x01d00000 - -#define SUNXI_DE_FE0_BASE 0x01e00000 -#define SUNXI_DE_FE1_BASE 0x01e20000 -#define SUNXI_DE_BE0_BASE 0x01e60000 -#define SUNXI_DE_BE1_BASE 0x01e40000 -#define SUNXI_MP_BASE 0x01e80000 -#define SUNXI_AVG_BASE 0x01ea0000 - -#define SUNXI_RTC_BASE 0x01f00000 -#define SUNXI_PRCM_BASE 0x01f01400 -#define SUN6I_CPUCFG_BASE 0x01f01c00 -#define SUNXI_R_UART_BASE 0x01f02800 -#define SUNXI_R_PIO_BASE 0x01f02c00 -#define SUN6I_P2WI_BASE 0x01f03400 -#define SUNXI_RSB_BASE 0x01f03400 - -/* CoreSight Debug Module */ -#define SUNXI_CSDM_BASE 0x3f500000 - -#define SUNXI_DDRII_DDRIII_BASE 0x40000000 /* 2 GiB */ - -#define SUNXI_BROM_BASE 0xffff0000 /* 32 kiB */ - -#define SUNXI_CPU_CFG (SUNXI_TIMER_BASE + 0x13c) - -/* SS bonding ids used for cpu identification */ -#define SUNXI_SS_BOND_ID_A31 4 -#define SUNXI_SS_BOND_ID_A31S 5 - -#ifndef __ASSEMBLY__ -void sunxi_board_init(void); -void sunxi_reset(void); -int sunxi_get_ss_bonding_id(void); -int sunxi_get_sid(unsigned int *sid); -#endif /* __ASSEMBLY__ */ -#endif /* _CPU_H */ +#endif /* _SUNXI_CPU_H */ diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h new file mode 100644 index 0000000..dae6069 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h @@ -0,0 +1,154 @@ +/* + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_CPU_SUN4I_H +#define _SUNXI_CPU_SUN4I_H + +#define SUNXI_SRAM_A1_BASE 0x00000000 +#define SUNXI_SRAM_A1_SIZE (16 * 1024) /* 16 kiB */ + +#define SUNXI_SRAM_A2_BASE 0x00004000 /* 16 kiB */ +#define SUNXI_SRAM_A3_BASE 0x00008000 /* 13 kiB */ +#define SUNXI_SRAM_A4_BASE 0x0000b400 /* 3 kiB */ +#define SUNXI_SRAM_D_BASE 0x00010000 /* 4 kiB */ +#define SUNXI_SRAM_B_BASE 0x00020000 /* 64 kiB (secure) */ + +#define SUNXI_SRAMC_BASE 0x01c00000 +#define SUNXI_DRAMC_BASE 0x01c01000 +#define SUNXI_DMA_BASE 0x01c02000 +#define SUNXI_NFC_BASE 0x01c03000 +#define SUNXI_TS_BASE 0x01c04000 +#define SUNXI_SPI0_BASE 0x01c05000 +#define SUNXI_SPI1_BASE 0x01c06000 +#define SUNXI_MS_BASE 0x01c07000 +#define SUNXI_TVD_BASE 0x01c08000 +#define SUNXI_CSI0_BASE 0x01c09000 +#define SUNXI_TVE0_BASE 0x01c0a000 +#define SUNXI_EMAC_BASE 0x01c0b000 +#define SUNXI_LCD0_BASE 0x01c0C000 +#define SUNXI_LCD1_BASE 0x01c0d000 +#define SUNXI_VE_BASE 0x01c0e000 +#define SUNXI_MMC0_BASE 0x01c0f000 +#define SUNXI_MMC1_BASE 0x01c10000 +#define SUNXI_MMC2_BASE 0x01c11000 +#define SUNXI_MMC3_BASE 0x01c12000 +#if !defined CONFIG_MACH_SUN6I && !defined CONFIG_MACH_SUN8I +#define SUNXI_USB0_BASE 0x01c13000 +#define SUNXI_USB1_BASE 0x01c14000 +#endif +#define SUNXI_SS_BASE 0x01c15000 +#define SUNXI_HDMI_BASE 0x01c16000 +#define SUNXI_SPI2_BASE 0x01c17000 +#define SUNXI_SATA_BASE 0x01c18000 +#if !defined CONFIG_MACH_SUN6I && !defined CONFIG_MACH_SUN8I +#define SUNXI_PATA_BASE 0x01c19000 +#define SUNXI_ACE_BASE 0x01c1a000 +#define SUNXI_TVE1_BASE 0x01c1b000 +#define SUNXI_USB2_BASE 0x01c1c000 +#else +#define SUNXI_USB0_BASE 0x01c19000 +#define SUNXI_USB1_BASE 0x01c1a000 +#define SUNXI_USB2_BASE 0x01c1b000 +#endif +#define SUNXI_CSI1_BASE 0x01c1d000 +#define SUNXI_TZASC_BASE 0x01c1e000 +#define SUNXI_SPI3_BASE 0x01c1f000 + +#define SUNXI_CCM_BASE 0x01c20000 +#define SUNXI_INTC_BASE 0x01c20400 +#define SUNXI_PIO_BASE 0x01c20800 +#define SUNXI_TIMER_BASE 0x01c20c00 +#define SUNXI_SPDIF_BASE 0x01c21000 +#define SUNXI_AC97_BASE 0x01c21400 +#define SUNXI_IR0_BASE 0x01c21800 +#define SUNXI_IR1_BASE 0x01c21c00 + +#define SUNXI_IIS_BASE 0x01c22400 +#define SUNXI_LRADC_BASE 0x01c22800 +#define SUNXI_AD_DA_BASE 0x01c22c00 +#define SUNXI_KEYPAD_BASE 0x01c23000 +#define SUNXI_TZPC_BASE 0x01c23400 +#define SUNXI_SID_BASE 0x01c23800 +#define SUNXI_SJTAG_BASE 0x01c23c00 + +#define SUNXI_TP_BASE 0x01c25000 +#define SUNXI_PMU_BASE 0x01c25400 +#define SUN7I_CPUCFG_BASE 0x01c25c00 + +#define SUNXI_UART0_BASE 0x01c28000 +#define SUNXI_UART1_BASE 0x01c28400 +#define SUNXI_UART2_BASE 0x01c28800 +#define SUNXI_UART3_BASE 0x01c28c00 +#define SUNXI_UART4_BASE 0x01c29000 +#define SUNXI_UART5_BASE 0x01c29400 +#define SUNXI_UART6_BASE 0x01c29800 +#define SUNXI_UART7_BASE 0x01c29c00 +#define SUNXI_PS2_0_BASE 0x01c2a000 +#define SUNXI_PS2_1_BASE 0x01c2a400 + +#define SUNXI_TWI0_BASE 0x01c2ac00 +#define SUNXI_TWI1_BASE 0x01c2b000 +#define SUNXI_TWI2_BASE 0x01c2b400 + +#define SUNXI_CAN_BASE 0x01c2bc00 + +#define SUNXI_SCR_BASE 0x01c2c400 + +#ifndef CONFIG_MACH_SUN6I +#define SUNXI_GPS_BASE 0x01c30000 +#define SUNXI_MALI400_BASE 0x01c40000 +#define SUNXI_GMAC_BASE 0x01c50000 +#else +#define SUNXI_GMAC_BASE 0x01c30000 +#endif + +#define SUNXI_DRAM_COM_BASE 0x01c62000 +#define SUNXI_DRAM_CTL0_BASE 0x01c63000 +#define SUNXI_DRAM_CTL1_BASE 0x01c64000 +#define SUNXI_DRAM_PHY0_BASE 0x01c65000 +#define SUNXI_DRAM_PHY1_BASE 0x01c66000 + +/* module sram */ +#define SUNXI_SRAM_C_BASE 0x01d00000 + +#define SUNXI_DE_FE0_BASE 0x01e00000 +#define SUNXI_DE_FE1_BASE 0x01e20000 +#define SUNXI_DE_BE0_BASE 0x01e60000 +#define SUNXI_DE_BE1_BASE 0x01e40000 +#define SUNXI_MP_BASE 0x01e80000 +#define SUNXI_AVG_BASE 0x01ea0000 + +#define SUNXI_RTC_BASE 0x01f00000 +#define SUNXI_PRCM_BASE 0x01f01400 +#define SUN6I_CPUCFG_BASE 0x01f01c00 +#define SUNXI_R_UART_BASE 0x01f02800 +#define SUNXI_R_PIO_BASE 0x01f02c00 +#define SUN6I_P2WI_BASE 0x01f03400 +#define SUNXI_RSB_BASE 0x01f03400 + +/* CoreSight Debug Module */ +#define SUNXI_CSDM_BASE 0x3f500000 + +#define SUNXI_DDRII_DDRIII_BASE 0x40000000 /* 2 GiB */ + +#define SUNXI_BROM_BASE 0xffff0000 /* 32 kiB */ + +#define SUNXI_CPU_CFG (SUNXI_TIMER_BASE + 0x13c) + +/* SS bonding ids used for cpu identification */ +#define SUNXI_SS_BOND_ID_A31 4 +#define SUNXI_SS_BOND_ID_A31S 5 + +#ifndef __ASSEMBLY__ +void sunxi_board_init(void); +void sunxi_reset(void); +int sunxi_get_ss_bonding_id(void); +int sunxi_get_sid(unsigned int *sid); +#endif /* __ASSEMBLY__ */ + +#endif /* _SUNXI_CPU_SUN4I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h new file mode 100644 index 0000000..04889c5 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h @@ -0,0 +1,109 @@ +/* + * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * (C) Copyright 2007-2013 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Jerry Wang <wangflord@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_CPU_SUN9I_H +#define _SUNXI_CPU_SUN9I_H + +#define REGS_AHB0_BASE 0x01C00000 +#define REGS_AHB1_BASE 0x00800000 +#define REGS_AHB2_BASE 0x03000000 +#define REGS_APB0_BASE 0x06000000 +#define REGS_APB1_BASE 0x07000000 +#define REGS_RCPUS_BASE 0x08000000 + +#define SUNXI_SRAM_D_BASE 0x08100000 + +/* AHB0 Module */ +#define SUNXI_NFC_BASE (REGS_AHB0_BASE + 0x3000) +#define SUNXI_TSC_BASE (REGS_AHB0_BASE + 0x4000) + +#define SUNXI_MMC0_BASE (REGS_AHB0_BASE + 0x0f000) +#define SUNXI_MMC1_BASE (REGS_AHB0_BASE + 0x10000) +#define SUNXI_MMC2_BASE (REGS_AHB0_BASE + 0x11000) +#define SUNXI_MMC3_BASE (REGS_AHB0_BASE + 0x12000) +#define SUNXI_MMC_COMMON_BASE (REGS_AHB0_BASE + 0x13000) + +#define SUNXI_SPI0_BASE (REGS_AHB0_BASE + 0x1A000) +#define SUNXI_SPI1_BASE (REGS_AHB0_BASE + 0x1B000) +#define SUNXI_SPI2_BASE (REGS_AHB0_BASE + 0x1C000) +#define SUNXI_SPI3_BASE (REGS_AHB0_BASE + 0x1D000) + +#define SUNXI_GIC400_BASE (REGS_AHB0_BASE + 0x40000) +#define SUNXI_ARMA9_GIC_BASE (REGS_AHB0_BASE + 0x41000) +#define SUNXI_ARMA9_CPUIF_BASE (REGS_AHB0_BASE + 0x42000) + +/* AHB1 Module */ +#define SUNXI_DMA_BASE (REGS_AHB1_BASE + 0x002000) +#define SUNXI_USBOTG_BASE (REGS_AHB1_BASE + 0x100000) +#define SUNXI_USBEHCI0_BASE (REGS_AHB1_BASE + 0x200000) +#define SUNXI_USBEHCI1_BASE (REGS_AHB1_BASE + 0x201000) +#define SUNXI_USBEHCI2_BASE (REGS_AHB1_BASE + 0x202000) + +/* AHB2 Module */ +#define SUNXI_DE_SYS_BASE (REGS_AHB2_BASE + 0x000000) +#define SUNXI_DISP_SYS_BASE (REGS_AHB2_BASE + 0x010000) +#define SUNXI_DE_FE0_BASE (REGS_AHB2_BASE + 0x100000) +#define SUNXI_DE_FE1_BASE (REGS_AHB2_BASE + 0x140000) +#define SUNXI_DE_FE2_BASE (REGS_AHB2_BASE + 0x180000) + +#define SUNXI_DE_BE0_BASE (REGS_AHB2_BASE + 0x200000) +#define SUNXI_DE_BE1_BASE (REGS_AHB2_BASE + 0x240000) +#define SUNXI_DE_BE2_BASE (REGS_AHB2_BASE + 0x280000) + +#define SUNXI_DE_DEU0_BASE (REGS_AHB2_BASE + 0x300000) +#define SUNXI_DE_DEU1_BASE (REGS_AHB2_BASE + 0x340000) +#define SUNXI_DE_DRC0_BASE (REGS_AHB2_BASE + 0x400000) +#define SUNXI_DE_DRC1_BASE (REGS_AHB2_BASE + 0x440000) + +#define SUNXI_LCD0_BASE (REGS_AHB2_BASE + 0xC00000) +#define SUNXI_LCD1_BASE (REGS_AHB2_BASE + 0xC10000) +#define SUNXI_LCD2_BASE (REGS_AHB2_BASE + 0xC20000) +#define SUNXI_MIPI_DSI0_BASE (REGS_AHB2_BASE + 0xC40000) +/* Also seen as SUNXI_MIPI_DSI0_DPHY_BASE 0x01ca1000 */ +#define SUNXI_MIPI_DSI0_DPHY_BASE (REGS_AHB2_BASE + 0xC40100) +#define SUNXI_HDMI_BASE (REGS_AHB2_BASE + 0xD00000) + +/* APB0 Module */ +#define SUNXI_CCM_BASE (REGS_APB0_BASE + 0x0000) +#define SUNXI_CCMMODULE_BASE (REGS_APB0_BASE + 0x0400) +#define SUNXI_PIO_BASE (REGS_APB0_BASE + 0x0800) +#define SUNXI_TIMER_BASE (REGS_APB0_BASE + 0x0C00) +#define SUNXI_PWM_BASE (REGS_APB0_BASE + 0x1400) +#define SUNXI_LRADC_BASE (REGS_APB0_BASE + 0x1800) + +/* APB1 Module */ +#define SUNXI_UART0_BASE (REGS_APB1_BASE + 0x0000) +#define SUNXI_UART1_BASE (REGS_APB1_BASE + 0x0400) +#define SUNXI_UART2_BASE (REGS_APB1_BASE + 0x0800) +#define SUNXI_UART3_BASE (REGS_APB1_BASE + 0x0C00) +#define SUNXI_UART4_BASE (REGS_APB1_BASE + 0x1000) +#define SUNXI_UART5_BASE (REGS_APB1_BASE + 0x1400) +#define SUNXI_TWI0_BASE (REGS_APB1_BASE + 0x2800) +#define SUNXI_TWI1_BASE (REGS_APB1_BASE + 0x2C00) +#define SUNXI_TWI2_BASE (REGS_APB1_BASE + 0x3000) +#define SUNXI_TWI3_BASE (REGS_APB1_BASE + 0x3400) +#define SUNXI_TWI4_BASE (REGS_APB1_BASE + 0x3800) + +/* RCPUS Module */ +#define SUNXI_PRCM_BASE (REGS_RCPUS_BASE + 0x1400) +#define SUNXI_R_UART_BASE (REGS_RCPUS_BASE + 0x2800) +#define SUNXI_R_PIO_BASE (REGS_RCPUS_BASE + 0x2c00) +#define SUNXI_RSB_BASE (REGS_RCPUS_BASE + 0x3400) + +/* Misc. */ +#define SUNXI_BROM_BASE 0xFFFF0000 /* 32K */ +#define SUNXI_CPU_CFG (SUNXI_TIMER_BASE + 0x13c) + +#ifndef __ASSEMBLY__ +void sunxi_board_init(void); +void sunxi_reset(void); +int sunxi_get_sid(unsigned int *sid); +#endif + +#endif /* _SUNXI_CPU_SUN9I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/display.h b/arch/arm/include/asm/arch-sunxi/display.h index 2ac8a87..5e94253 100644 --- a/arch/arm/include/asm/arch-sunxi/display.h +++ b/arch/arm/include/asm/arch-sunxi/display.h @@ -9,6 +9,107 @@ #ifndef _SUNXI_DISPLAY_H #define _SUNXI_DISPLAY_H +struct sunxi_de_fe_reg { + u32 enable; /* 0x000 */ + u32 frame_ctrl; /* 0x004 */ + u32 bypass; /* 0x008 */ + u32 algorithm_sel; /* 0x00c */ + u32 line_int_ctrl; /* 0x010 */ + u8 res0[0x0c]; /* 0x014 */ + u32 ch0_addr; /* 0x020 */ + u32 ch1_addr; /* 0x024 */ + u32 ch2_addr; /* 0x028 */ + u32 field_sequence; /* 0x02c */ + u32 ch0_offset; /* 0x030 */ + u32 ch1_offset; /* 0x034 */ + u32 ch2_offset; /* 0x038 */ + u8 res1[0x04]; /* 0x03c */ + u32 ch0_stride; /* 0x040 */ + u32 ch1_stride; /* 0x044 */ + u32 ch2_stride; /* 0x048 */ + u32 input_fmt; /* 0x04c */ + u32 ch3_addr; /* 0x050 */ + u32 ch4_addr; /* 0x054 */ + u32 ch5_addr; /* 0x058 */ + u32 output_fmt; /* 0x05c */ + u32 int_enable; /* 0x060 */ + u32 int_status; /* 0x064 */ + u32 status; /* 0x068 */ + u8 res2[0x04]; /* 0x06c */ + u32 csc_coef00; /* 0x070 */ + u32 csc_coef01; /* 0x074 */ + u32 csc_coef02; /* 0x078 */ + u32 csc_coef03; /* 0x07c */ + u32 csc_coef10; /* 0x080 */ + u32 csc_coef11; /* 0x084 */ + u32 csc_coef12; /* 0x088 */ + u32 csc_coef13; /* 0x08c */ + u32 csc_coef20; /* 0x090 */ + u32 csc_coef21; /* 0x094 */ + u32 csc_coef22; /* 0x098 */ + u32 csc_coef23; /* 0x09c */ + u32 deinterlace_ctrl; /* 0x0a0 */ + u32 deinterlace_diag; /* 0x0a4 */ + u32 deinterlace_tempdiff; /* 0x0a8 */ + u32 deinterlace_sawtooth; /* 0x0ac */ + u32 deinterlace_spatcomp; /* 0x0b0 */ + u32 deinterlace_burstlen; /* 0x0b4 */ + u32 deinterlace_preluma; /* 0x0b8 */ + u32 deinterlace_tile_addr; /* 0x0bc */ + u32 deinterlace_tile_stride; /* 0x0c0 */ + u8 res3[0x0c]; /* 0x0c4 */ + u32 wb_stride_enable; /* 0x0d0 */ + u32 ch3_stride; /* 0x0d4 */ + u32 ch4_stride; /* 0x0d8 */ + u32 ch5_stride; /* 0x0dc */ + u32 fe_3d_ctrl; /* 0x0e0 */ + u32 fe_3d_ch0_addr; /* 0x0e4 */ + u32 fe_3d_ch1_addr; /* 0x0e8 */ + u32 fe_3d_ch2_addr; /* 0x0ec */ + u32 fe_3d_ch0_offset; /* 0x0f0 */ + u32 fe_3d_ch1_offset; /* 0x0f4 */ + u32 fe_3d_ch2_offset; /* 0x0f8 */ + u8 res4[0x04]; /* 0x0fc */ + u32 ch0_insize; /* 0x100 */ + u32 ch0_outsize; /* 0x104 */ + u32 ch0_horzfact; /* 0x108 */ + u32 ch0_vertfact; /* 0x10c */ + u32 ch0_horzphase; /* 0x110 */ + u32 ch0_vertphase0; /* 0x114 */ + u32 ch0_vertphase1; /* 0x118 */ + u8 res5[0x04]; /* 0x11c */ + u32 ch0_horztapoffset0; /* 0x120 */ + u32 ch0_horztapoffset1; /* 0x124 */ + u32 ch0_verttapoffset; /* 0x128 */ + u8 res6[0xd4]; /* 0x12c */ + u32 ch1_insize; /* 0x200 */ + u32 ch1_outsize; /* 0x204 */ + u32 ch1_horzfact; /* 0x208 */ + u32 ch1_vertfact; /* 0x20c */ + u32 ch1_horzphase; /* 0x210 */ + u32 ch1_vertphase0; /* 0x214 */ + u32 ch1_vertphase1; /* 0x218 */ + u8 res7[0x04]; /* 0x21c */ + u32 ch1_horztapoffset0; /* 0x220 */ + u32 ch1_horztapoffset1; /* 0x224 */ + u32 ch1_verttapoffset; /* 0x228 */ + u8 res8[0x1d4]; /* 0x22c */ + u32 ch0_horzcoef0[32]; /* 0x400 */ + u32 ch0_horzcoef1[32]; /* 0x480 */ + u32 ch0_vertcoef[32]; /* 0x500 */ + u8 res9[0x80]; /* 0x580 */ + u32 ch1_horzcoef0[32]; /* 0x600 */ + u32 ch1_horzcoef1[32]; /* 0x680 */ + u32 ch1_vertcoef[32]; /* 0x700 */ + u8 res10[0x280]; /* 0x780 */ + u32 vpp_enable; /* 0xa00 */ + u32 vpp_dcti; /* 0xa04 */ + u32 vpp_lp1; /* 0xa08 */ + u32 vpp_lp2; /* 0xa0c */ + u32 vpp_wle; /* 0xa10 */ + u32 vpp_ble; /* 0xa14 */ +}; + struct sunxi_de_be_reg { u8 res0[0x800]; /* 0x000 */ u32 mode; /* 0x800 */ @@ -210,6 +311,20 @@ struct sunxi_tve_reg { }; /* + * DE-FE register constants. + */ +#define SUNXI_DE_FE_WIDTH(x) (((x) - 1) << 0) +#define SUNXI_DE_FE_HEIGHT(y) (((y) - 1) << 16) +#define SUNXI_DE_FE_FACTOR_INT(n) ((n) << 16) +#define SUNXI_DE_FE_ENABLE_EN (1 << 0) +#define SUNXI_DE_FE_FRAME_CTRL_REG_RDY (1 << 0) +#define SUNXI_DE_FE_FRAME_CTRL_COEF_RDY (1 << 1) +#define SUNXI_DE_FE_FRAME_CTRL_FRM_START (1 << 16) +#define SUNXI_DE_FE_BYPASS_CSC_BYPASS (1 << 1) +#define SUNXI_DE_FE_INPUT_FMT_ARGB8888 0x00000151 +#define SUNXI_DE_FE_OUTPUT_FMT_ARGB8888 0x00000002 + +/* * DE-BE register constants. */ #define SUNXI_DE_BE_WIDTH(x) (((x) - 1) << 0) @@ -219,6 +334,7 @@ struct sunxi_tve_reg { #define SUNXI_DE_BE_MODE_LAYER0_ENABLE (1 << 8) #define SUNXI_DE_BE_LAYER_STRIDE(x) ((x) << 5) #define SUNXI_DE_BE_REG_CTRL_LOAD_REGS (1 << 0) +#define SUNXI_DE_BE_LAYER_ATTR0_SRC_FE0 0x00000002 #define SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888 (0x09 << 8) /* @@ -249,9 +365,7 @@ struct sunxi_tve_reg { #define SUNXI_LCDC_TCON0_TIMING_V_TOTAL(n) (((n) * 2) << 16) #define SUNXI_LCDC_TCON0_LVDS_INTF_BITWIDTH(n) ((n) << 26) #define SUNXI_LCDC_TCON0_LVDS_INTF_ENABLE (1 << 31) -#define SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE0 (0 << 28) -#define SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE60 (1 << 28) -#define SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE120 (2 << 28) +#define SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE(x) ((x) << 28) #define SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(n) (((n) & 0x1f) << 4) #define SUNXI_LCDC_TCON1_CTRL_ENABLE (1 << 31) #define SUNXI_LCDC_TCON1_TIMING_H_BP(n) (((n) - 1) << 0) diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun4i.h b/arch/arm/include/asm/arch-sunxi/dram_sun4i.h index 6c1ec5b..40c385a 100644 --- a/arch/arm/include/asm/arch-sunxi/dram_sun4i.h +++ b/arch/arm/include/asm/arch-sunxi/dram_sun4i.h @@ -76,7 +76,7 @@ struct dram_para { u32 cas; u32 zq; u32 odt_en; - u32 size; + u32 size; /* For compat with dram.c files from u-boot-sunxi, unused */ u32 tpr0; u32 tpr1; u32 tpr2; diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 71cc879..f2c247d 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -45,9 +45,13 @@ * * sun8i has 1 bank: * PL0 - PL11 + * + * sun9i has 3 banks: + * PL0 - PL9 | PM0 - PM15 | PN0 - PN1 */ #define SUNXI_GPIO_L 11 #define SUNXI_GPIO_M 12 +#define SUNXI_GPIO_N 13 struct sunxi_gpio { u32 cfg[4]; @@ -114,6 +118,7 @@ enum sunxi_gpio_number { SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H), SUNXI_GPIO_L_START = 352, SUNXI_GPIO_M_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_L), + SUNXI_GPIO_N_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_M), SUNXI_GPIO_AXP0_START = 1024, }; @@ -129,6 +134,7 @@ enum sunxi_gpio_number { #define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr)) #define SUNXI_GPL(_nr) (SUNXI_GPIO_L_START + (_nr)) #define SUNXI_GPM(_nr) (SUNXI_GPIO_M_START + (_nr)) +#define SUNXI_GPN(_nr) (SUNXI_GPIO_N_START + (_nr)) #define SUNXI_GPAXP0(_nr) (SUNXI_GPIO_AXP0_START + (_nr)) @@ -187,6 +193,9 @@ enum sunxi_gpio_number { #define SUN8I_GPL2_R_UART_TX 2 #define SUN8I_GPL3_R_UART_RX 2 +#define SUN9I_GPN0_R_RSB_SCK 3 +#define SUN9I_GPN1_R_RSB_SDA 3 + /* GPIO pin pull-up/down config */ #define SUNXI_GPIO_PULL_DISABLE 0 #define SUNXI_GPIO_PULL_UP 1 diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h index 537f145..74833b5 100644 --- a/arch/arm/include/asm/arch-sunxi/mmc.h +++ b/arch/arm/include/asm/arch-sunxi/mmc.h @@ -43,10 +43,11 @@ struct sunxi_mmc { u32 chda; /* 0x90 */ u32 cbda; /* 0x94 */ u32 res1[26]; -#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) +#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) || \ + defined(CONFIG_MACH_SUN9I) u32 res2[64]; #endif - u32 fifo; /* 0x100 (0x200 on sun6i) FIFO access address */ + u32 fifo; /* 0x100 / 0x200 FIFO access address */ }; #define SUNXI_MMC_CLK_POWERSAVE (0x1 << 17) @@ -123,5 +124,8 @@ struct sunxi_mmc { #define SUNXI_MMC_IDIE_TXIRQ (0x1 << 0) #define SUNXI_MMC_IDIE_RXIRQ (0x1 << 1) +#define SUNXI_MMC_COMMON_CLK_GATE (1 << 16) +#define SUNXI_MMC_COMMON_RESET (1 << 18) + struct mmc *sunxi_mmc_init(int sdc_no); #endif /* _SUNXI_MMC_H */ diff --git a/arch/arm/include/asm/arch-sunxi/rsb.h b/arch/arm/include/asm/arch-sunxi/rsb.h index 95a595a..a893466 100644 --- a/arch/arm/include/asm/arch-sunxi/rsb.h +++ b/arch/arm/include/asm/arch-sunxi/rsb.h @@ -37,6 +37,7 @@ struct sunxi_rsb_reg { #define RSB_STAT_TERR_INT (1 << 1) #define RSB_STAT_LBSY_INT (1 << 2) +#define RSB_DMCR_DEVICE_MODE_DATA 0x7c3e00 #define RSB_DMCR_DEVICE_MODE_START (1 << 31) #define RSB_CMD_BYTE_WRITE 0x4e @@ -46,8 +47,7 @@ struct sunxi_rsb_reg { #define RSB_DEVADDR_RUNTIME_ADDR(x) ((x) << 16) #define RSB_DEVADDR_DEVICE_ADDR(x) ((x) << 0) -void rsb_init(void); -int rsb_set_device_mode(u32 device_mode_data); +int rsb_init(void); int rsb_set_device_address(u16 device_addr, u16 runtime_addr); int rsb_write(const u16 runtime_device_addr, const u8 reg_addr, u8 data); int rsb_read(const u16 runtime_device_addr, const u8 reg_addr, u8 *data); diff --git a/arch/arm/include/asm/arch-sunxi/usbc.h b/arch/arm/include/asm/arch-sunxi/usbc.h index 8d20973..cb538cd 100644 --- a/arch/arm/include/asm/arch-sunxi/usbc.h +++ b/arch/arm/include/asm/arch-sunxi/usbc.h @@ -11,6 +11,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ +extern const struct musb_platform_ops sunxi_musb_ops; + void *sunxi_usbc_get_io_base(int index); int sunxi_usbc_request_resources(int index); int sunxi_usbc_free_resources(int index); diff --git a/arch/arm/include/asm/arch-tegra/tegra_mmc.h b/arch/arm/include/asm/arch-tegra/tegra_mmc.h index 84e7b55..a20bdaa 100644 --- a/arch/arm/include/asm/arch-tegra/tegra_mmc.h +++ b/arch/arm/include/asm/arch-tegra/tegra_mmc.h @@ -10,6 +10,7 @@ #define __TEGRA_MMC_H_ #include <fdtdec.h> +#include <asm/gpio.h> /* for mmc_config definition */ #include <mmc.h> @@ -134,9 +135,9 @@ struct mmc_host { int enabled; /* 1 to enable, 0 to disable */ int width; /* Bus Width, 1, 4 or 8 */ enum periph_id mmc_id; /* Peripheral ID: PERIPH_ID_... */ - struct fdt_gpio_state cd_gpio; /* Change Detect GPIO */ - struct fdt_gpio_state pwr_gpio; /* Power GPIO */ - struct fdt_gpio_state wp_gpio; /* Write Protect GPIO */ + struct gpio_desc cd_gpio; /* Change Detect GPIO */ + struct gpio_desc pwr_gpio; /* Power GPIO */ + struct gpio_desc wp_gpio; /* Write Protect GPIO */ unsigned int version; /* SDHCI spec. version */ unsigned int clock; /* Current clock (MHz) */ struct mmc_config cfg; /* mmc configuration */ diff --git a/arch/arm/include/asm/arch-tegra20/display.h b/arch/arm/include/asm/arch-tegra20/display.h index a04c84e..6feeda3 100644 --- a/arch/arm/include/asm/arch-tegra20/display.h +++ b/arch/arm/include/asm/arch-tegra20/display.h @@ -10,6 +10,7 @@ #include <asm/arch/dc.h> #include <fdtdec.h> +#include <asm/gpio.h> /* This holds information about a window which can be displayed */ struct disp_ctl_win { @@ -72,10 +73,10 @@ struct fdt_panel_config { int pwm_channel; /* PWM channel to use for backlight */ enum lcd_cache_t cache_type; - struct fdt_gpio_state backlight_en; /* GPIO for backlight enable */ - struct fdt_gpio_state lvds_shutdown; /* GPIO for lvds shutdown */ - struct fdt_gpio_state backlight_vdd; /* GPIO for backlight vdd */ - struct fdt_gpio_state panel_vdd; /* GPIO for panel vdd */ + struct gpio_desc backlight_en; /* GPIO for backlight enable */ + struct gpio_desc lvds_shutdown; /* GPIO for lvds shutdown */ + struct gpio_desc backlight_vdd; /* GPIO for backlight vdd */ + struct gpio_desc panel_vdd; /* GPIO for panel vdd */ /* * Panel required timings * Timing 1: delay between panel_vdd-rise and data-rise diff --git a/arch/arm/include/asm/arch-uniphier/boot-device.h b/arch/arm/include/asm/arch-uniphier/boot-device.h index 6987f57..7a10f1c 100644 --- a/arch/arm/include/asm/arch-uniphier/boot-device.h +++ b/arch/arm/include/asm/arch-uniphier/boot-device.h @@ -8,7 +8,7 @@ #ifndef _ASM_BOOT_DEVICE_H_ #define _ASM_BOOT_DEVICE_H_ -u32 get_boot_mode_sel(void); +int get_boot_mode_sel(void); struct boot_device_info { u32 type; diff --git a/arch/arm/include/asm/arch-uniphier/ddrphy-regs.h b/arch/arm/include/asm/arch-uniphier/ddrphy-regs.h index 484559c..6b7d600 100644 --- a/arch/arm/include/asm/arch-uniphier/ddrphy-regs.h +++ b/arch/arm/include/asm/arch-uniphier/ddrphy-regs.h @@ -72,7 +72,7 @@ struct ddrphy { u32 gtr; /* General Timing Register */ u32 rsv[3]; /* Reserved */ } dx[9]; -} __packed; +}; #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/arch-uniphier/sg-regs.h b/arch/arm/include/asm/arch-uniphier/sg-regs.h index fa5e6ae..4ae67c8 100644 --- a/arch/arm/include/asm/arch-uniphier/sg-regs.h +++ b/arch/arm/include/asm/arch-uniphier/sg-regs.h @@ -25,22 +25,29 @@ /* Memory Configuration */ #define SG_MEMCONF (SG_CTRL_BASE | 0x0400) -#define SG_MEMCONF_CH0_SIZE_64MB ((0x0 << 10) | (0x01 << 0)) -#define SG_MEMCONF_CH0_SIZE_128MB ((0x0 << 10) | (0x02 << 0)) -#define SG_MEMCONF_CH0_SIZE_256MB ((0x0 << 10) | (0x03 << 0)) -#define SG_MEMCONF_CH0_SIZE_512MB ((0x1 << 10) | (0x00 << 0)) -#define SG_MEMCONF_CH0_SIZE_1024MB ((0x1 << 10) | (0x01 << 0)) +#define SG_MEMCONF_CH0_SZ_64M ((0x0 << 10) | (0x01 << 0)) +#define SG_MEMCONF_CH0_SZ_128M ((0x0 << 10) | (0x02 << 0)) +#define SG_MEMCONF_CH0_SZ_256M ((0x0 << 10) | (0x03 << 0)) +#define SG_MEMCONF_CH0_SZ_512M ((0x1 << 10) | (0x00 << 0)) +#define SG_MEMCONF_CH0_SZ_1G ((0x1 << 10) | (0x01 << 0)) #define SG_MEMCONF_CH0_NUM_1 (0x1 << 8) #define SG_MEMCONF_CH0_NUM_2 (0x0 << 8) -#define SG_MEMCONF_CH1_SIZE_64MB ((0x0 << 11) | (0x01 << 2)) -#define SG_MEMCONF_CH1_SIZE_128MB ((0x0 << 11) | (0x02 << 2)) -#define SG_MEMCONF_CH1_SIZE_256MB ((0x0 << 11) | (0x03 << 2)) -#define SG_MEMCONF_CH1_SIZE_512MB ((0x1 << 11) | (0x00 << 2)) -#define SG_MEMCONF_CH1_SIZE_1024MB ((0x1 << 11) | (0x01 << 2)) +#define SG_MEMCONF_CH1_SZ_64M ((0x0 << 11) | (0x01 << 2)) +#define SG_MEMCONF_CH1_SZ_128M ((0x0 << 11) | (0x02 << 2)) +#define SG_MEMCONF_CH1_SZ_256M ((0x0 << 11) | (0x03 << 2)) +#define SG_MEMCONF_CH1_SZ_512M ((0x1 << 11) | (0x00 << 2)) +#define SG_MEMCONF_CH1_SZ_1G ((0x1 << 11) | (0x01 << 2)) #define SG_MEMCONF_CH1_NUM_1 (0x1 << 9) #define SG_MEMCONF_CH1_NUM_2 (0x0 << 9) +#define SG_MEMCONF_CH2_SZ_64M ((0x0 << 26) | (0x01 << 16)) +#define SG_MEMCONF_CH2_SZ_128M ((0x0 << 26) | (0x02 << 16)) +#define SG_MEMCONF_CH2_SZ_256M ((0x0 << 26) | (0x03 << 16)) +#define SG_MEMCONF_CH2_SZ_512M ((0x1 << 26) | (0x00 << 16)) +#define SG_MEMCONF_CH2_NUM_1 (0x1 << 24) +#define SG_MEMCONF_CH2_NUM_2 (0x0 << 24) + #define SG_MEMCONF_SPARSEMEM (0x1 << 4) /* Pin Control */ @@ -101,6 +108,7 @@ #else #include <linux/types.h> +#include <linux/sizes.h> #include <asm/io.h> static inline void sg_set_pinsel(int n, int value) @@ -111,24 +119,24 @@ static inline void sg_set_pinsel(int n, int value) static inline u32 sg_memconf_val_ch0(unsigned long size, int num) { - int size_mb = (size >> 20) / num; + int size_mb = size / num; u32 ret; switch (size_mb) { - case 64: - ret = SG_MEMCONF_CH0_SIZE_64MB; + case SZ_64M: + ret = SG_MEMCONF_CH0_SZ_64M; break; - case 128: - ret = SG_MEMCONF_CH0_SIZE_128MB; + case SZ_128M: + ret = SG_MEMCONF_CH0_SZ_128M; break; - case 256: - ret = SG_MEMCONF_CH0_SIZE_256MB; + case SZ_256M: + ret = SG_MEMCONF_CH0_SZ_256M; break; - case 512: - ret = SG_MEMCONF_CH0_SIZE_512MB; + case SZ_512M: + ret = SG_MEMCONF_CH0_SZ_512M; break; - case 1024: - ret = SG_MEMCONF_CH0_SIZE_1024MB; + case SZ_1G: + ret = SG_MEMCONF_CH0_SZ_1G; break; default: BUG(); @@ -151,24 +159,24 @@ static inline u32 sg_memconf_val_ch0(unsigned long size, int num) static inline u32 sg_memconf_val_ch1(unsigned long size, int num) { - int size_mb = (size >> 20) / num; + int size_mb = size / num; u32 ret; switch (size_mb) { - case 64: - ret = SG_MEMCONF_CH1_SIZE_64MB; + case SZ_64M: + ret = SG_MEMCONF_CH1_SZ_64M; break; - case 128: - ret = SG_MEMCONF_CH1_SIZE_128MB; + case SZ_128M: + ret = SG_MEMCONF_CH1_SZ_128M; break; - case 256: - ret = SG_MEMCONF_CH1_SIZE_256MB; + case SZ_256M: + ret = SG_MEMCONF_CH1_SZ_256M; break; - case 512: - ret = SG_MEMCONF_CH1_SIZE_512MB; + case SZ_512M: + ret = SG_MEMCONF_CH1_SZ_512M; break; - case 1024: - ret = SG_MEMCONF_CH1_SIZE_1024MB; + case SZ_1G: + ret = SG_MEMCONF_CH1_SZ_1G; break; default: BUG(); @@ -188,6 +196,43 @@ static inline u32 sg_memconf_val_ch1(unsigned long size, int num) } return ret; } + +static inline u32 sg_memconf_val_ch2(unsigned long size, int num) +{ + int size_mb = size / num; + u32 ret; + + switch (size_mb) { + case SZ_64M: + ret = SG_MEMCONF_CH2_SZ_64M; + break; + case SZ_128M: + ret = SG_MEMCONF_CH2_SZ_128M; + break; + case SZ_256M: + ret = SG_MEMCONF_CH2_SZ_256M; + break; + case SZ_512M: + ret = SG_MEMCONF_CH2_SZ_512M; + break; + default: + BUG(); + break; + } + + switch (num) { + case 1: + ret |= SG_MEMCONF_CH2_NUM_1; + break; + case 2: + ret |= SG_MEMCONF_CH2_NUM_2; + break; + default: + BUG(); + break; + } + return ret; +} #endif /* __ASSEMBLY__ */ #endif /* ARCH_SG_REGS_H */ diff --git a/arch/arm/include/asm/arch-zynq/gpio.h b/arch/arm/include/asm/arch-zynq/gpio.h index 2dbba75..a26ae87 100644 --- a/arch/arm/include/asm/arch-zynq/gpio.h +++ b/arch/arm/include/asm/arch-zynq/gpio.h @@ -7,19 +7,4 @@ #ifndef _ZYNQ_GPIO_H #define _ZYNQ_GPIO_H -inline int gpio_get_value(unsigned gpio) -{ - return 0; -} - -inline int gpio_set_value(unsigned gpio, int val) -{ - return 0; -} - -inline int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - #endif /* _ZYNQ_GPIO_H */ diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h index 2aede0c..e2e0b73 100644 --- a/arch/arm/include/asm/arch-zynq/hardware.h +++ b/arch/arm/include/asm/arch-zynq/hardware.h @@ -21,6 +21,9 @@ #define ZYNQ_I2C_BASEADDR1 0xE0005000 #define ZYNQ_SPI_BASEADDR0 0xE0006000 #define ZYNQ_SPI_BASEADDR1 0xE0007000 +#define ZYNQ_QSPI_BASEADDR 0xE000D000 +#define ZYNQ_SMC_BASEADDR 0xE000E000 +#define ZYNQ_NAND_BASEADDR 0xE1000000 #define ZYNQ_DDRC_BASEADDR 0xF8006000 #define ZYNQ_EFUSE_BASEADDR 0xF800D000 #define ZYNQ_USB_BASEADDR0 0xE0002000 @@ -28,7 +31,9 @@ /* Bootmode setting values */ #define ZYNQ_BM_MASK 0x7 +#define ZYNQ_BM_QSPI 0x1 #define ZYNQ_BM_NOR 0x2 +#define ZYNQ_BM_NAND 0x4 #define ZYNQ_BM_SD 0x5 #define ZYNQ_BM_JTAG 0x0 diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h index 89c47f3..9d50e24 100644 --- a/arch/arm/include/asm/arch-zynq/sys_proto.h +++ b/arch/arm/include/asm/arch-zynq/sys_proto.h @@ -20,7 +20,7 @@ extern void zynq_ddrc_init(void); extern unsigned int zynq_get_silicon_version(void); /* Driver extern functions */ -extern int zynq_sdhci_init(u32 regbase); +extern int zynq_sdhci_init(phys_addr_t regbase); extern int zynq_sdhci_of_init(const void *blob); extern void ps7_init(void); diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h index f97f3dd..414042d 100644 --- a/arch/arm/include/asm/u-boot-arm.h +++ b/arch/arm/include/asm/u-boot-arm.h @@ -36,7 +36,6 @@ int arch_early_init_r(void); /* board/.../... */ int board_init(void); -int dram_init (void); void dram_init_banksize (void); /* cpu/.../interrupt.c */ |