diff options
Diffstat (limited to 'arch/arm/include')
| -rw-r--r-- | arch/arm/include/asm/arch-mx35/lowlevel_macro.S | 191 |
1 files changed, 95 insertions, 96 deletions
diff --git a/arch/arm/include/asm/arch-mx35/lowlevel_macro.S b/arch/arm/include/asm/arch-mx35/lowlevel_macro.S index 05aa951..bc6dbea 100644 --- a/arch/arm/include/asm/arch-mx35/lowlevel_macro.S +++ b/arch/arm/include/asm/arch-mx35/lowlevel_macro.S @@ -19,122 +19,121 @@ * MA 02111-1307 USA */ +#include <asm/arch/imx-regs.h> +#include <generated/asm-offsets.h> +#include <asm/macro.h> + /* * AIPS setup - Only setup MPROTx registers. * The PACR default values are good. + * + * Default argument values: + * - MPR: Set all MPROTx to be non-bufferable, trusted for R/W, not forced to + * user-mode. + * - OPACR: Clear the on and off peripheral modules Supervisor Protect bit for + * SDMA to access them. */ -.macro init_aips - /* - * Set all MPROTx to be non-bufferable, trusted for R/W, - * not forced to user-mode. - */ - ldr r0, =AIPS1_BASE_ADDR - ldr r1, =AIPS_MPR_CONFIG - str r1, [r0, #0x00] - str r1, [r0, #0x04] - ldr r0, =AIPS2_BASE_ADDR - str r1, [r0, #0x00] - str r1, [r0, #0x04] +.macro init_aips mpr=0x77777777, opacr=0x00000000 + ldr r0, =AIPS1_BASE_ADDR + ldr r1, =\mpr + str r1, [r0, #AIPS_MPR_0_7] + str r1, [r0, #AIPS_MPR_8_15] + ldr r2, =AIPS2_BASE_ADDR + str r1, [r2, #AIPS_MPR_0_7] + str r1, [r2, #AIPS_MPR_8_15] - /* - * Clear the on and off peripheral modules Supervisor Protect bit - * for SDMA to access them. Did not change the AIPS control registers - * (offset 0x20) access type - */ - ldr r0, =AIPS1_BASE_ADDR - ldr r1, =AIPS_OPACR_CONFIG - str r1, [r0, #0x40] - str r1, [r0, #0x44] - str r1, [r0, #0x48] - str r1, [r0, #0x4C] - str r1, [r0, #0x50] - ldr r0, =AIPS2_BASE_ADDR - str r1, [r0, #0x40] - str r1, [r0, #0x44] - str r1, [r0, #0x48] - str r1, [r0, #0x4C] - str r1, [r0, #0x50] + /* Did not change the AIPS control registers access type. */ + ldr r1, =\opacr + str r1, [r0, #AIPS_OPACR_0_7] + str r1, [r0, #AIPS_OPACR_8_15] + str r1, [r0, #AIPS_OPACR_16_23] + str r1, [r0, #AIPS_OPACR_24_31] + str r1, [r0, #AIPS_OPACR_32_39] + str r1, [r2, #AIPS_OPACR_0_7] + str r1, [r2, #AIPS_OPACR_8_15] + str r1, [r2, #AIPS_OPACR_16_23] + str r1, [r2, #AIPS_OPACR_24_31] + str r1, [r2, #AIPS_OPACR_32_39] .endm -/* MAX (Multi-Layer AHB Crossbar Switch) setup */ -.macro init_max - ldr r0, =MAX_BASE_ADDR - /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ - ldr r1, =MAX_MPR_CONFIG - str r1, [r0, #0x000] /* for S0 */ - str r1, [r0, #0x100] /* for S1 */ - str r1, [r0, #0x200] /* for S2 */ - str r1, [r0, #0x300] /* for S3 */ - str r1, [r0, #0x400] /* for S4 */ - /* SGPCR - always park on last master */ - ldr r1, =MAX_SGPCR_CONFIG - str r1, [r0, #0x010] /* for S0 */ - str r1, [r0, #0x110] /* for S1 */ - str r1, [r0, #0x210] /* for S2 */ - str r1, [r0, #0x310] /* for S3 */ - str r1, [r0, #0x410] /* for S4 */ - /* MGPCR - restore default values */ - ldr r1, =MAX_MGPCR_CONFIG - str r1, [r0, #0x800] /* for M0 */ - str r1, [r0, #0x900] /* for M1 */ - str r1, [r0, #0xA00] /* for M2 */ - str r1, [r0, #0xB00] /* for M3 */ - str r1, [r0, #0xC00] /* for M4 */ - str r1, [r0, #0xD00] /* for M5 */ +/* + * MAX (Multi-Layer AHB Crossbar Switch) setup + * + * Default argument values: + * - MPR: priority is M4 > M2 > M3 > M5 > M0 > M1 + * - SGPCR: always park on last master + * - MGPCR: restore default values + */ +.macro init_max mpr=0x00302154, sgpcr=0x00000010, mgpcr=0x00000000 + ldr r0, =MAX_BASE_ADDR + ldr r1, =\mpr + str r1, [r0, #MAX_MPR0] /* for S0 */ + str r1, [r0, #MAX_MPR1] /* for S1 */ + str r1, [r0, #MAX_MPR2] /* for S2 */ + str r1, [r0, #MAX_MPR3] /* for S3 */ + str r1, [r0, #MAX_MPR4] /* for S4 */ + ldr r1, =\sgpcr + str r1, [r0, #MAX_SGPCR0] /* for S0 */ + str r1, [r0, #MAX_SGPCR1] /* for S1 */ + str r1, [r0, #MAX_SGPCR2] /* for S2 */ + str r1, [r0, #MAX_SGPCR3] /* for S3 */ + str r1, [r0, #MAX_SGPCR4] /* for S4 */ + ldr r1, =\mgpcr + str r1, [r0, #MAX_MGPCR0] /* for M0 */ + str r1, [r0, #MAX_MGPCR1] /* for M1 */ + str r1, [r0, #MAX_MGPCR2] /* for M2 */ + str r1, [r0, #MAX_MGPCR3] /* for M3 */ + str r1, [r0, #MAX_MGPCR4] /* for M4 */ + str r1, [r0, #MAX_MGPCR5] /* for M5 */ .endm -/* M3IF setup */ -.macro init_m3if - /* Configure M3IF registers */ - ldr r1, =M3IF_BASE_ADDR - /* - * M3IF Control Register (M3IFCTL) - * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 - * MRRP[1] = L2CC1 not on priority list (0 << 0) = 0x00000000 - * MRRP[2] = MBX not on priority list (0 << 0) = 0x00000000 - * MRRP[3] = MAX1 not on priority list (0 << 0) = 0x00000000 - * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 - * MRRP[5] = MPEG4 not on priority list (0 << 0) = 0x00000000 - * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 - * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 - * ------------ - * 0x00000040 - */ - ldr r0, =M3IF_CONFIG - str r0, [r1] /* M3IF control reg */ +/* + * M3IF setup + * + * Default argument values: + * - CTL: + * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 + * MRRP[1] = L2CC1 not on priority list (0 << 1) = 0x00000000 + * MRRP[2] = MBX not on priority list (0 << 2) = 0x00000000 + * MRRP[3] = MAX1 not on priority list (0 << 3) = 0x00000000 + * MRRP[4] = SDMA not on priority list (0 << 4) = 0x00000000 + * MRRP[5] = MPEG4 not on priority list (0 << 5) = 0x00000000 + * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 + * MRRP[7] = IPU2 not on priority list (0 << 7) = 0x00000000 + * ------------ + * 0x00000040 + */ +.macro init_m3if ctl=0x00000040 + /* M3IF Control Register (M3IFCTL) */ + write32 M3IF_BASE_ADDR, \ctl .endm .macro core_init - mrc 15, 0, r1, c1, c0, 0 + mrc p15, 0, r1, c1, c0, 0 - mrc 15, 0, r0, c1, c0, 1 - orr r0, r0, #7 - mcr 15, 0, r0, c1, c0, 1 - orr r1, r1, #(1<<11) + /* Set branch prediction enable */ + mrc p15, 0, r0, c1, c0, 1 + orr r0, r0, #7 + mcr p15, 0, r0, c1, c0, 1 + orr r1, r1, #1 << 11 /* Set unaligned access enable */ - orr r1, r1, #(1<<22) + orr r1, r1, #1 << 22 /* Set low int latency enable */ - orr r1, r1, #(1<<21) + orr r1, r1, #1 << 21 - mcr 15, 0, r1, c1, c0, 0 + mcr p15, 0, r1, c1, c0, 0 - mov r0, #0 + mov r0, #0 - /* Set branch prediction enable */ - mcr 15, 0, r0, c15, c2, 4 + mcr p15, 0, r0, c15, c2, 4 - mcr 15, 0, r0, c7, c7, 0 /* invalidate I cache and D cache */ - mcr 15, 0, r0, c8, c7, 0 /* invalidate TLBs */ - mcr 15, 0, r0, c7, c10, 4 /* Drain the write buffer */ + mcr p15, 0, r0, c7, c7, 0 /* Invalidate I cache and D cache */ + mcr p15, 0, r0, c8, c7, 0 /* Invalidate TLBs */ + mcr p15, 0, r0, c7, c10, 4 /* Drain the write buffer */ - /* - * initializes very early AIPS - * Then it also initializes Multi-Layer AHB Crossbar Switch, - * M3IF - * Also setup the Peripheral Port Remap register inside the core - */ - ldr r0, =0x40000015 /* start from AIPS 2GB region */ - mcr p15, 0, r0, c15, c2, 4 + /* Setup the Peripheral Port Memory Remap Register */ + ldr r0, =0x40000015 /* Start from AIPS 2-GB region */ + mcr p15, 0, r0, c15, c2, 4 .endm |