diff options
Diffstat (limited to 'arch/arm/include')
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/cpu.h | 15 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/ddr_defs.h | 69 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/hardware.h | 4 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/mux.h | 261 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/spl.h | 1 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/sys_proto.h | 27 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-omap3/dss.h | 1 |
7 files changed, 318 insertions, 60 deletions
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index 6cfbef7..819fd2f 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -169,6 +169,12 @@ struct cm_dpll { unsigned int clktimer2clk; /* offset 0x08 */ }; +/* Control Module RTC registers */ +struct cm_rtc { + unsigned int rtcclkctrl; /* offset 0x0 */ + unsigned int clkstctrl; /* offset 0x4 */ +}; + /* Watchdog timer registers */ struct wd_timer { unsigned int resv1[4]; @@ -218,6 +224,15 @@ struct gptimer { unsigned int tcar2; /* offset 0x58 */ }; +/* RTC Registers */ +struct rtc_regs { + unsigned int res[21]; + unsigned int osc; /* offset 0x54 */ + unsigned int res2[5]; + unsigned int kick0r; /* offset 0x6c */ + unsigned int kick1r; /* offset 0x70 */ +}; + /* UART Registers */ struct uart_sys { unsigned int resv1[21]; diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index 6b22c45..8e69fb6 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -29,40 +29,41 @@ #define PHY_DLL_LOCK_DIFF 0x0 #define DDR_CKE_CTRL_NORMAL 0x1 -#define DDR2_EMIF_READ_LATENCY 0x100005 /* Enable Dynamic Power Down */ -#define DDR2_EMIF_TIM1 0x0666B3C9 -#define DDR2_EMIF_TIM2 0x243631CA -#define DDR2_EMIF_TIM3 0x0000033F -#define DDR2_EMIF_SDCFG 0x41805332 -#define DDR2_EMIF_SDREF 0x0000081a -#define DDR2_DLL_LOCK_DIFF 0x0 -#define DDR2_RATIO 0x80 -#define DDR2_INVERT_CLKOUT 0x00 -#define DDR2_RD_DQS 0x12 -#define DDR2_WR_DQS 0x00 -#define DDR2_PHY_WRLVL 0x00 -#define DDR2_PHY_GATELVL 0x00 -#define DDR2_PHY_WR_DATA 0x40 -#define DDR2_PHY_FIFO_WE 0x80 -#define DDR2_PHY_RANK0_DELAY 0x1 -#define DDR2_IOCTRL_VALUE 0x18B +/* Micron MT47H128M16RT-25E */ +#define MT47H128M16RT25E_EMIF_READ_LATENCY 0x100005 +#define MT47H128M16RT25E_EMIF_TIM1 0x0666B3C9 +#define MT47H128M16RT25E_EMIF_TIM2 0x243631CA +#define MT47H128M16RT25E_EMIF_TIM3 0x0000033F +#define MT47H128M16RT25E_EMIF_SDCFG 0x41805332 +#define MT47H128M16RT25E_EMIF_SDREF 0x0000081a +#define MT47H128M16RT25E_DLL_LOCK_DIFF 0x0 +#define MT47H128M16RT25E_RATIO 0x80 +#define MT47H128M16RT25E_INVERT_CLKOUT 0x00 +#define MT47H128M16RT25E_RD_DQS 0x12 +#define MT47H128M16RT25E_WR_DQS 0x00 +#define MT47H128M16RT25E_PHY_WRLVL 0x00 +#define MT47H128M16RT25E_PHY_GATELVL 0x00 +#define MT47H128M16RT25E_PHY_WR_DATA 0x40 +#define MT47H128M16RT25E_PHY_FIFO_WE 0x80 +#define MT47H128M16RT25E_PHY_RANK0_DELAY 0x1 +#define MT47H128M16RT25E_IOCTRL_VALUE 0x18B /* Micron MT41J128M16JT-125 */ -#define DDR3_EMIF_READ_LATENCY 0x06 -#define DDR3_EMIF_TIM1 0x0888A39B -#define DDR3_EMIF_TIM2 0x26337FDA -#define DDR3_EMIF_TIM3 0x501F830F -#define DDR3_EMIF_SDCFG 0x61C04AB2 -#define DDR3_EMIF_SDREF 0x0000093B -#define DDR3_ZQ_CFG 0x50074BE4 -#define DDR3_DLL_LOCK_DIFF 0x1 -#define DDR3_RATIO 0x40 -#define DDR3_INVERT_CLKOUT 0x1 -#define DDR3_RD_DQS 0x3B -#define DDR3_WR_DQS 0x85 -#define DDR3_PHY_WR_DATA 0xC1 -#define DDR3_PHY_FIFO_WE 0x100 -#define DDR3_IOCTRL_VALUE 0x18B +#define MT41J128MJT125_EMIF_READ_LATENCY 0x06 +#define MT41J128MJT125_EMIF_TIM1 0x0888A39B +#define MT41J128MJT125_EMIF_TIM2 0x26337FDA +#define MT41J128MJT125_EMIF_TIM3 0x501F830F +#define MT41J128MJT125_EMIF_SDCFG 0x61C04AB2 +#define MT41J128MJT125_EMIF_SDREF 0x0000093B +#define MT41J128MJT125_ZQ_CFG 0x50074BE4 +#define MT41J128MJT125_DLL_LOCK_DIFF 0x1 +#define MT41J128MJT125_RATIO 0x40 +#define MT41J128MJT125_INVERT_CLKOUT 0x1 +#define MT41J128MJT125_RD_DQS 0x3B +#define MT41J128MJT125_WR_DQS 0x85 +#define MT41J128MJT125_PHY_WR_DATA 0xC1 +#define MT41J128MJT125_PHY_FIFO_WE 0x100 +#define MT41J128MJT125_IOCTRL_VALUE 0x18B /** * Configure SDRAM @@ -189,6 +190,8 @@ struct ddr_ctrl { unsigned int ddrckectrl; }; -void config_ddr(short ddr_type); +void config_ddr(unsigned int pll, unsigned int ioctrl, + const struct ddr_data *data, const struct cmd_control *ctrl, + const struct emif_regs *regs); #endif /* _DDR_DEFS_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 62332f2..5bd4bc8 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -61,6 +61,7 @@ #define CM_WKUP 0x44E00400 #define CM_DPLL 0x44E00500 #define CM_DEVICE 0x44E00700 +#define CM_RTC 0x44E00800 #define CM_CEFUSE 0x44E00A00 #define PRM_DEVICE 0x44E00F00 @@ -83,4 +84,7 @@ #define AM335X_CPSW_BASE 0x4A100000 #define AM335X_CPSW_MDIO_BASE 0x4A101000 +/* RTC base address */ +#define AM335X_RTC_BASE 0x44E3E000 + #endif /* __AM33XX_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mux.h b/arch/arm/include/asm/arch-am33xx/mux.h new file mode 100644 index 0000000..aed6b00 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/mux.h @@ -0,0 +1,261 @@ +/* + * mux.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MUX_H_ +#define _MUX_H_ + +#include <common.h> +#include <asm/io.h> + +#define MUX_CFG(value, offset) \ + __raw_writel(value, (CTRL_BASE + offset)); + +/* PAD Control Fields */ +#define SLEWCTRL (0x1 << 6) +#define RXACTIVE (0x1 << 5) +#define PULLUP_EN (0x1 << 4) /* Pull UP Selection */ +#define PULLUDEN (0x0 << 3) /* Pull up enabled */ +#define PULLUDDIS (0x1 << 3) /* Pull up disabled */ +#define MODE(val) val /* used for Readability */ + +/* + * PAD CONTROL OFFSETS + * Field names corresponds to the pad signal name + */ +struct pad_signals { + int gpmc_ad0; + int gpmc_ad1; + int gpmc_ad2; + int gpmc_ad3; + int gpmc_ad4; + int gpmc_ad5; + int gpmc_ad6; + int gpmc_ad7; + int gpmc_ad8; + int gpmc_ad9; + int gpmc_ad10; + int gpmc_ad11; + int gpmc_ad12; + int gpmc_ad13; + int gpmc_ad14; + int gpmc_ad15; + int gpmc_a0; + int gpmc_a1; + int gpmc_a2; + int gpmc_a3; + int gpmc_a4; + int gpmc_a5; + int gpmc_a6; + int gpmc_a7; + int gpmc_a8; + int gpmc_a9; + int gpmc_a10; + int gpmc_a11; + int gpmc_wait0; + int gpmc_wpn; + int gpmc_be1n; + int gpmc_csn0; + int gpmc_csn1; + int gpmc_csn2; + int gpmc_csn3; + int gpmc_clk; + int gpmc_advn_ale; + int gpmc_oen_ren; + int gpmc_wen; + int gpmc_be0n_cle; + int lcd_data0; + int lcd_data1; + int lcd_data2; + int lcd_data3; + int lcd_data4; + int lcd_data5; + int lcd_data6; + int lcd_data7; + int lcd_data8; + int lcd_data9; + int lcd_data10; + int lcd_data11; + int lcd_data12; + int lcd_data13; + int lcd_data14; + int lcd_data15; + int lcd_vsync; + int lcd_hsync; + int lcd_pclk; + int lcd_ac_bias_en; + int mmc0_dat3; + int mmc0_dat2; + int mmc0_dat1; + int mmc0_dat0; + int mmc0_clk; + int mmc0_cmd; + int mii1_col; + int mii1_crs; + int mii1_rxerr; + int mii1_txen; + int mii1_rxdv; + int mii1_txd3; + int mii1_txd2; + int mii1_txd1; + int mii1_txd0; + int mii1_txclk; + int mii1_rxclk; + int mii1_rxd3; + int mii1_rxd2; + int mii1_rxd1; + int mii1_rxd0; + int rmii1_refclk; + int mdio_data; + int mdio_clk; + int spi0_sclk; + int spi0_d0; + int spi0_d1; + int spi0_cs0; + int spi0_cs1; + int ecap0_in_pwm0_out; + int uart0_ctsn; + int uart0_rtsn; + int uart0_rxd; + int uart0_txd; + int uart1_ctsn; + int uart1_rtsn; + int uart1_rxd; + int uart1_txd; + int i2c0_sda; + int i2c0_scl; + int mcasp0_aclkx; + int mcasp0_fsx; + int mcasp0_axr0; + int mcasp0_ahclkr; + int mcasp0_aclkr; + int mcasp0_fsr; + int mcasp0_axr1; + int mcasp0_ahclkx; + int xdma_event_intr0; + int xdma_event_intr1; + int nresetin_out; + int porz; + int nnmi; + int osc0_in; + int osc0_out; + int rsvd1; + int tms; + int tdi; + int tdo; + int tck; + int ntrst; + int emu0; + int emu1; + int osc1_in; + int osc1_out; + int pmic_power_en; + int rtc_porz; + int rsvd2; + int ext_wakeup; + int enz_kaldo_1p8v; + int usb0_dm; + int usb0_dp; + int usb0_ce; + int usb0_id; + int usb0_vbus; + int usb0_drvvbus; + int usb1_dm; + int usb1_dp; + int usb1_ce; + int usb1_id; + int usb1_vbus; + int usb1_drvvbus; + int ddr_resetn; + int ddr_csn0; + int ddr_cke; + int ddr_ck; + int ddr_nck; + int ddr_casn; + int ddr_rasn; + int ddr_wen; + int ddr_ba0; + int ddr_ba1; + int ddr_ba2; + int ddr_a0; + int ddr_a1; + int ddr_a2; + int ddr_a3; + int ddr_a4; + int ddr_a5; + int ddr_a6; + int ddr_a7; + int ddr_a8; + int ddr_a9; + int ddr_a10; + int ddr_a11; + int ddr_a12; + int ddr_a13; + int ddr_a14; + int ddr_a15; + int ddr_odt; + int ddr_d0; + int ddr_d1; + int ddr_d2; + int ddr_d3; + int ddr_d4; + int ddr_d5; + int ddr_d6; + int ddr_d7; + int ddr_d8; + int ddr_d9; + int ddr_d10; + int ddr_d11; + int ddr_d12; + int ddr_d13; + int ddr_d14; + int ddr_d15; + int ddr_dqm0; + int ddr_dqm1; + int ddr_dqs0; + int ddr_dqsn0; + int ddr_dqs1; + int ddr_dqsn1; + int ddr_vref; + int ddr_vtp; + int ddr_strben0; + int ddr_strben1; + int ain7; + int ain6; + int ain5; + int ain4; + int ain3; + int ain2; + int ain1; + int ain0; + int vrefp; + int vrefn; +}; + +struct module_pin_mux { + short reg_offset; + unsigned char val; +}; + +/* Pad control register offset */ +#define PAD_CTRL_BASE 0x800 +#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \ + (PAD_CTRL_BASE))->x) + +/* + * Configure the pin mux for the module + */ +void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux); + +#endif diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index 63ed10b..644ff35 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -27,6 +27,7 @@ #define BOOT_DEVICE_NAND 5 #define BOOT_DEVICE_MMC1 8 #define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */ +#define BOOT_DEVICE_SPI 11 #define BOOT_DEVICE_UART 65 #define BOOT_DEVICE_CPGMAC 70 #define BOOT_DEVICE_MMC2_2 0xFF diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 819ea65..9cf35e0 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -19,24 +19,6 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ -/* - * AM335x parts define a system EEPROM that defines certain sub-fields. - * We use these fields to in turn see what board we are on, and what - * that might require us to set or not set. - */ -#define HDR_NO_OF_MAC_ADDR 3 -#define HDR_ETH_ALEN 6 -#define HDR_NAME_LEN 8 - -struct am335x_baseboard_id { - unsigned int magic; - char name[HDR_NAME_LEN]; - char version[4]; - char serial[12]; - char config[32]; - char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN]; -}; - #define BOARD_REV_ID 0x0 u32 get_cpu_rev(void); @@ -51,13 +33,4 @@ u32 get_device_type(void); void setup_clocks_for_console(void); void ddr_pll_config(unsigned int ddrpll_M); -/* - * We have three pin mux functions that must exist. We must be able to enable - * uart0, for initial output and i2c0 to read the main EEPROM. We then have a - * main pinmux function that can be overridden to enable all other pinmux that - * is required on the board. - */ -void enable_uart0_pin_mux(void); -void enable_i2c0_pin_mux(void); -void enable_board_pin_mux(struct am335x_baseboard_id *header); #endif diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h index 54add4b..ffaffbb 100644 --- a/arch/arm/include/asm/arch-omap3/dss.h +++ b/arch/arm/include/asm/arch-omap3/dss.h @@ -190,6 +190,7 @@ struct panel_config { #define PANEL_TIMING_H(bp, fp, sw) (DSS_HBP(bp) | DSS_HFP(fp) | DSS_HSW(sw)) #define PANEL_TIMING_V(bp, fp, sw) (DSS_VBP(bp) | DSS_VFP(fp) | DSS_VSW(sw)) +#define PANEL_LCD_SIZE(xres, yres) ((yres - 1) << 16 | (xres - 1)) /* Generic DSS Functions */ void omap3_dss_venc_config(const struct venc_regs *venc_cfg, |