diff options
Diffstat (limited to 'arch/arm/include/asm')
39 files changed, 1085 insertions, 36 deletions
diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index 8543f43..e756418 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -25,6 +25,7 @@ #else #define BOOT_DEVICE_XIP 2 #define BOOT_DEVICE_NAND 5 +#define BOOT_DEVICE_NAND_I2C 6 #if defined(CONFIG_AM33XX) #define BOOT_DEVICE_MMC1 8 #define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */ diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h index 61f427d..0289ba6 100644 --- a/arch/arm/include/asm/arch-bcm2835/mbox.h +++ b/arch/arm/include/asm/arch-bcm2835/mbox.h @@ -119,6 +119,39 @@ struct bcm2835_mbox_tag_hdr { * }; */ +#define BCM2835_MBOX_TAG_GET_BOARD_REV 0x00010002 + +/* + * 0x2..0xf from: + * http://raspberryalphaomega.org.uk/2013/02/06/automatic-raspberry-pi-board-revision-detection-model-a-b1-and-b2/ + * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=32733 + * 0x10, 0x11 from swarren's testing + */ +#define BCM2835_BOARD_REV_B_I2C0_2 0x2 +#define BCM2835_BOARD_REV_B_I2C0_3 0x3 +#define BCM2835_BOARD_REV_B_I2C1_4 0x4 +#define BCM2835_BOARD_REV_B_I2C1_5 0x5 +#define BCM2835_BOARD_REV_B_I2C1_6 0x6 +#define BCM2835_BOARD_REV_A_7 0x7 +#define BCM2835_BOARD_REV_A_8 0x8 +#define BCM2835_BOARD_REV_A_9 0x9 +#define BCM2835_BOARD_REV_B_REV2_d 0xd +#define BCM2835_BOARD_REV_B_REV2_e 0xe +#define BCM2835_BOARD_REV_B_REV2_f 0xf +#define BCM2835_BOARD_REV_B_PLUS 0x10 +#define BCM2835_BOARD_REV_CM 0x11 + +struct bcm2835_mbox_tag_get_board_rev { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + } req; + struct { + u32 rev; + } resp; + } body; +}; + #define BCM2835_MBOX_TAG_GET_MAC_ADDRESS 0x00010003 struct bcm2835_mbox_tag_get_mac_address { diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index 78aceef..29674ad 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -227,6 +227,13 @@ static inline void s5p_set_cpu_id(void) /* Exynos5420 */ s5p_cpu_id = 0x5420; break; + case 0x422: + /* + * Exynos5800 is a variant of Exynos5420 + * and has product id 0x5422 + */ + s5p_cpu_id = 0x5800; + break; } } @@ -255,6 +262,7 @@ IS_EXYNOS_TYPE(exynos4210, 0x4210) IS_EXYNOS_TYPE(exynos4412, 0x4412) IS_EXYNOS_TYPE(exynos5250, 0x5250) IS_EXYNOS_TYPE(exynos5420, 0x5420) +IS_EXYNOS_TYPE(exynos5800, 0x5800) #define SAMSUNG_BASE(device, base) \ static inline unsigned int __attribute__((no_instrument_function)) \ @@ -265,7 +273,7 @@ static inline unsigned int __attribute__((no_instrument_function)) \ return EXYNOS4X12_##base; \ return EXYNOS4_##base; \ } else if (cpu_is_exynos5()) { \ - if (proid_is_exynos5420()) \ + if (proid_is_exynos5420() || proid_is_exynos5800()) \ return EXYNOS5420_##base; \ return EXYNOS5_##base; \ } \ diff --git a/arch/arm/include/asm/arch-exynos/dmc.h b/arch/arm/include/asm/arch-exynos/dmc.h index ec3f9b6..4990a1a 100644 --- a/arch/arm/include/asm/arch-exynos/dmc.h +++ b/arch/arm/include/asm/arch-exynos/dmc.h @@ -450,6 +450,7 @@ enum mem_manuf { #define CONCONTROL_RD_FETCH_SHIFT 12 #define CONCONTROL_RD_FETCH_MASK (0x7 << CONCONTROL_RD_FETCH_SHIFT) #define CONCONTROL_AREF_EN_SHIFT 5 +#define CONCONTROL_UPDATE_MODE (1 << 3) /* PRECHCONFIG register field */ #define PRECHCONFIG_TP_CNT_SHIFT 24 diff --git a/arch/arm/include/asm/arch-exynos/ehci.h b/arch/arm/include/asm/arch-exynos/ehci.h index d2d70bd..3800fa9 100644 --- a/arch/arm/include/asm/arch-exynos/ehci.h +++ b/arch/arm/include/asm/arch-exynos/ehci.h @@ -12,6 +12,13 @@ #define CLK_24MHZ 5 +#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) +#define PHYPWR_NORMAL_MASK_PHY1 (0x7 << 6) +#define PHYPWR_NORMAL_MASK_HSIC0 (0x7 << 9) +#define PHYPWR_NORMAL_MASK_HSIC1 (0x7 << 12) +#define RSTCON_HOSTPHY_SWRST (0xf << 3) +#define RSTCON_SWRST (0x1 << 0) + #define HOST_CTRL0_PHYSWRSTALL (1 << 31) #define HOST_CTRL0_COMMONON_N (1 << 9) #define HOST_CTRL0_SIDDQ (1 << 6) @@ -61,6 +68,12 @@ struct exynos_usb_phy { unsigned int usbotgtune; }; +struct exynos4412_usb_phy { + unsigned int usbphyctrl; + unsigned int usbphyclk; + unsigned int usbphyrstcon; +}; + /* Switch on the VBUS power. */ int board_usb_vbus_init(void); diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h index 02287de..9699954 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -1398,7 +1398,7 @@ static struct gpio_info exynos5420_gpio_data[EXYNOS5420_GPIO_NUM_PARTS] = { static inline struct gpio_info *get_gpio_data(void) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return exynos5420_gpio_data; else return exynos5_gpio_data; @@ -1415,7 +1415,7 @@ static inline struct gpio_info *get_gpio_data(void) static inline unsigned int get_bank_num(void) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420()) + if (proid_is_exynos5420() || proid_is_exynos5800()) return EXYNOS5420_GPIO_NUM_PARTS; else return EXYNOS5_GPIO_NUM_PARTS; diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h index e8a98a5..3f97b31 100644 --- a/arch/arm/include/asm/arch-exynos/power.h +++ b/arch/arm/include/asm/arch-exynos/power.h @@ -210,6 +210,13 @@ struct exynos4_power { unsigned int gps_alive_option; }; +struct exynos4412_power { + unsigned char res1[0x0704]; + unsigned int usbhost_phy_control; + unsigned int hsic1_phy_control; + unsigned int hsic2_phy_control; +}; + struct exynos5_power { unsigned int om_stat; unsigned char res1[0x18]; diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index f2c9687..ba86eea 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -27,7 +27,10 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500) #define CONFIG_SYS_DCU_ADDR (CONFIG_SYS_IMMR + 0x01ce0000) +#define CONFIG_SYS_LS102XA_USB1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_LS102XA_USB1_OFFSET) +#define CONFIG_SYS_LS102XA_USB1_OFFSET 0x07600000 #define CONFIG_SYS_TSEC1_OFFSET 0x01d10000 #define CONFIG_SYS_TSEC2_OFFSET 0x01d50000 #define CONFIG_SYS_TSEC3_OFFSET 0x01d90000 @@ -72,6 +75,10 @@ #define DCU_LAYER_MAX_NUM 16 +#define QE_MURAM_SIZE 0x6000UL +#define MAX_QE_RISC 1 +#define QE_NUM_OF_SNUM 28 + #define CONFIG_SYS_FSL_SRDS_1 #ifdef CONFIG_LS102XA @@ -80,6 +87,7 @@ #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0 #define CONFIG_SYS_FSL_SEC_COMPAT 5 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #else #error SoC not defined #endif diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index 7995fe2..b0c267c 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -95,8 +95,6 @@ struct ccsr_gur { u32 sdhcpcr; }; -#define SCFG_SCFGREVCR_REV 0xffffffff -#define SCFG_SCFGREVCR_NOREV 0 #define SCFG_ETSECDMAMCR_LE_BD_FR 0xf8001a0f #define SCFG_ETSECCMCR_GE2_CLK125 0x04000000 #define SCFG_PIXCLKCR_PXCKEN 0x80000000 @@ -182,7 +180,7 @@ struct ccsr_scfg { u32 etsecmcr; u32 sdhciovserlcr; u32 resv14[61]; - u32 sparecr; + u32 sparecr[8]; }; /* Clocking */ @@ -448,6 +446,7 @@ struct ccsr_ddr { #define CCI400_CTRLORD_TERM_BARRIER 0x00000008 #define CCI400_CTRLORD_EN_BARRIER 0 +#define CCI400_SHAORD_NON_SHAREABLE 0x00000002 /* CCI-400 registers */ struct ccsr_cci400 { diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h index 30d9de2..0dc584b 100644 --- a/arch/arm/include/asm/arch-omap5/clock.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -278,11 +278,11 @@ /* TPS659038 */ #define TPS659038_I2C_SLAVE_ADDR 0x58 -#define TPS659038_REG_ADDR_SMPS12_MPU 0x23 -#define TPS659038_REG_ADDR_SMPS45_EVE 0x2B -#define TPS659038_REG_ADDR_SMPS6_GPU 0x2F -#define TPS659038_REG_ADDR_SMPS7_CORE 0x33 -#define TPS659038_REG_ADDR_SMPS8_IVA 0x37 +#define TPS659038_REG_ADDR_SMPS12 0x23 +#define TPS659038_REG_ADDR_SMPS45 0x2B +#define TPS659038_REG_ADDR_SMPS6 0x2F +#define TPS659038_REG_ADDR_SMPS7 0x33 +#define TPS659038_REG_ADDR_SMPS8 0x37 /* TPS */ #define TPS62361_I2C_SLAVE_ADDR 0x60 @@ -314,7 +314,7 @@ */ #define CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC 31219 -#ifdef CONFIG_DRA7XX +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) #define V_OSCK 20000000 /* Clock output from T2 */ #else #define V_OSCK 19200000 /* Clock output from T2 */ diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index b9600cf..e218159 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -27,7 +27,7 @@ #define CONTROL_CORE_ID_CODE 0x4A002204 #define CONTROL_WKUP_ID_CODE 0x4AE0C204 -#ifdef CONFIG_DRA7XX +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) #define CONTROL_ID_CODE CONTROL_WKUP_ID_CODE #else #define CONTROL_ID_CODE CONTROL_CORE_ID_CODE @@ -163,7 +163,7 @@ struct s32ktimer { * much larger) and do not, at this time, make use of the additional * space. */ -#ifdef CONFIG_DRA7XX +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */ #else diff --git a/arch/arm/include/asm/arch-rmobile/mmc.h b/arch/arm/include/asm/arch-rmobile/mmc.h new file mode 100644 index 0000000..4e0fef1 --- /dev/null +++ b/arch/arm/include/asm/arch-rmobile/mmc.h @@ -0,0 +1,14 @@ +/* + * Renesas SuperH MMCIF driver. + * + * Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * Copyright (C) 2014 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0 + */ +#ifndef _RMOBILE_MMC_H_ +#define _RMOBILE_MMC_H_ + +int mmcif_mmc_init(void); + +#endif /* _RMOBILE_MMC_H_ */ diff --git a/arch/arm/include/asm/arch-rmobile/r8a7790.h b/arch/arm/include/asm/arch-rmobile/r8a7790.h index de14869..132d58c 100644 --- a/arch/arm/include/asm/arch-rmobile/r8a7790.h +++ b/arch/arm/include/asm/arch-rmobile/r8a7790.h @@ -15,6 +15,19 @@ #define CONFIG_SYS_I2C_SH_BASE2 0xE6520000 #define CONFIG_SYS_I2C_SH_BASE3 0xE60B0000 +/* Module stop control/status register bits */ +#define MSTP0_BITS 0x00640801 +#define MSTP1_BITS 0xDB6E9BDF +#define MSTP2_BITS 0x300DA1FC +#define MSTP3_BITS 0xF08CF831 +#define MSTP4_BITS 0x80000184 +#define MSTP5_BITS 0x44C00046 +#define MSTP7_BITS 0x07F30718 +#define MSTP8_BITS 0x01F0FF84 +#define MSTP9_BITS 0xF5979FCF +#define MSTP10_BITS 0xFFFEFFE0 +#define MSTP11_BITS 0x00000000 + #define R8A7790_CUT_ES2X 2 #define IS_R8A7790_ES2() \ (rmobile_get_cpu_rev_integer() == R8A7790_CUT_ES2X) diff --git a/arch/arm/include/asm/arch-rmobile/r8a7791.h b/arch/arm/include/asm/arch-rmobile/r8a7791.h index 26a0bd5..d2cbcd7 100644 --- a/arch/arm/include/asm/arch-rmobile/r8a7791.h +++ b/arch/arm/include/asm/arch-rmobile/r8a7791.h @@ -51,6 +51,19 @@ #define DBSC3_1_QOS_W15_BASE 0xE67A2F00 #define DBSC3_1_DBADJ2 0xE67A00C8 +/* Module stop control/status register bits */ +#define MSTP0_BITS 0x00640801 +#define MSTP1_BITS 0x9B6C9B5A +#define MSTP2_BITS 0x100D21FC +#define MSTP3_BITS 0xF08CD810 +#define MSTP4_BITS 0x800001C4 +#define MSTP5_BITS 0x44C00046 +#define MSTP7_BITS 0x05BFE618 +#define MSTP8_BITS 0x40C0FE85 +#define MSTP9_BITS 0xFF979FFF +#define MSTP10_BITS 0xFFFEFFE0 +#define MSTP11_BITS 0x000001C0 + #define R8A7791_CUT_ES2X 2 #define IS_R8A7791_ES2() \ (rmobile_get_cpu_rev_integer() == R8A7791_CUT_ES2X) diff --git a/arch/arm/include/asm/arch-rmobile/r8a7793.h b/arch/arm/include/asm/arch-rmobile/r8a7793.h index 778812e..1abdeb7 100644 --- a/arch/arm/include/asm/arch-rmobile/r8a7793.h +++ b/arch/arm/include/asm/arch-rmobile/r8a7793.h @@ -56,6 +56,20 @@ /* * R8A7793 I/O Product Information */ + +/* Module stop control/status register bits */ +#define MSTP0_BITS 0x00640801 +#define MSTP1_BITS 0x9B6C9B5A +#define MSTP2_BITS 0x100D21FC +#define MSTP3_BITS 0xF08CD810 +#define MSTP4_BITS 0x800001C4 +#define MSTP5_BITS 0x44C00046 +#define MSTP7_BITS 0x05BFE618 +#define MSTP8_BITS 0x40C0FE85 +#define MSTP9_BITS 0xFF979FFF +#define MSTP10_BITS 0xFFFEFFE0 +#define MSTP11_BITS 0x000001C0 + #define R8A7793_CUT_ES2X 2 #define IS_R8A7793_ES2() \ (rmobile_get_cpu_rev_integer() == R8A7793_CUT_ES2X) diff --git a/arch/arm/include/asm/arch-rmobile/r8a7794.h b/arch/arm/include/asm/arch-rmobile/r8a7794.h index 66d5a29..d7c9004 100644 --- a/arch/arm/include/asm/arch-rmobile/r8a7794.h +++ b/arch/arm/include/asm/arch-rmobile/r8a7794.h @@ -14,4 +14,17 @@ /* SH-I2C */ #define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000 +/* Module stop control/status register bits */ +#define MSTP0_BITS 0x00440801 +#define MSTP1_BITS 0x936899DA +#define MSTP2_BITS 0x100D21FC +#define MSTP3_BITS 0xE084D810 +#define MSTP4_BITS 0x800001C4 +#define MSTP5_BITS 0x40C00044 +#define MSTP7_BITS 0x013FE618 +#define MSTP8_BITS 0x40803C05 +#define MSTP9_BITS 0xFB879FEE +#define MSTP10_BITS 0xFFFEFFE0 +#define MSTP11_BITS 0x000001C0 + #endif /* __ASM_ARCH_R8A7794_H */ diff --git a/arch/arm/include/asm/arch-rmobile/rcar-base.h b/arch/arm/include/asm/arch-rmobile/rcar-base.h index dbbebcf..23c4bba 100644 --- a/arch/arm/include/asm/arch-rmobile/rcar-base.h +++ b/arch/arm/include/asm/arch-rmobile/rcar-base.h @@ -29,6 +29,45 @@ #define SCIF4_BASE 0xE6EE0000 #define SCIF5_BASE 0xE6EE8000 +/* Module stop status register */ +#define MSTPSR0 0xE6150030 +#define MSTPSR1 0xE6150038 +#define MSTPSR2 0xE6150040 +#define MSTPSR3 0xE6150048 +#define MSTPSR4 0xE615004C +#define MSTPSR5 0xE615003C +#define MSTPSR7 0xE61501C4 +#define MSTPSR8 0xE61509A0 +#define MSTPSR9 0xE61509A4 +#define MSTPSR10 0xE61509A8 +#define MSTPSR11 0xE61509AC + +/* Realtime module stop control register */ +#define RMSTPCR0 0xE6150110 +#define RMSTPCR1 0xE6150114 +#define RMSTPCR2 0xE6150118 +#define RMSTPCR3 0xE615011C +#define RMSTPCR4 0xE6150120 +#define RMSTPCR5 0xE6150124 +#define RMSTPCR7 0xE615012C +#define RMSTPCR8 0xE6150980 +#define RMSTPCR9 0xE6150984 +#define RMSTPCR10 0xE6150988 +#define RMSTPCR11 0xE615098C + +/* System module stop control register */ +#define SMSTPCR0 0xE6150130 +#define SMSTPCR1 0xE6150134 +#define SMSTPCR2 0xE6150138 +#define SMSTPCR3 0xE615013C +#define SMSTPCR4 0xE6150140 +#define SMSTPCR5 0xE6150144 +#define SMSTPCR7 0xE615014C +#define SMSTPCR8 0xE6150990 +#define SMSTPCR9 0xE6150994 +#define SMSTPCR10 0xE6150998 +#define SMSTPCR11 0xE615099C + /* * SH-I2C * Ch2 and ch3 are different address. These are defined diff --git a/arch/arm/include/asm/arch-rmobile/rcar-mstp.h b/arch/arm/include/asm/arch-rmobile/rcar-mstp.h new file mode 100644 index 0000000..9a564f8 --- /dev/null +++ b/arch/arm/include/asm/arch-rmobile/rcar-mstp.h @@ -0,0 +1,109 @@ +/* + * arch/arm/include/asm/arch-rmobile/rcar-mstp.h + * + * Copyright (C) 2013, 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * Copyright (C) 2013, 2014 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __ASM_ARCH_RCAR_MSTP_H +#define __ASM_ARCH_RCAR_MSTP_H + +#define mstp_setbits(type, addr, saddr, set) \ + out_##type((saddr), in_##type(addr) | (set)) +#define mstp_clrbits(type, addr, saddr, clear) \ + out_##type((saddr), in_##type(addr) & ~(clear)) +#define mstp_setclrbits(type, addr, set, clear) \ + out_##type((addr), (in_##type(addr) | (set)) & ~(clear)) +#define mstp_setbits_le32(addr, saddr, set) \ + mstp_setbits(le32, addr, saddr, set) +#define mstp_clrbits_le32(addr, saddr, clear) \ + mstp_clrbits(le32, addr, saddr, clear) +#define mstp_setclrbits_le32(addr, set, clear) \ + mstp_setclrbits(le32, addr, set, clear) + +#ifndef CONFIG_SMSTP0_ENA +#define CONFIG_SMSTP0_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP1_ENA +#define CONFIG_SMSTP1_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP2_ENA +#define CONFIG_SMSTP2_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP3_ENA +#define CONFIG_SMSTP3_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP4_ENA +#define CONFIG_SMSTP4_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP5_ENA +#define CONFIG_SMSTP5_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP6_ENA +#define CONFIG_SMSTP6_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP7_ENA +#define CONFIG_SMSTP7_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP8_ENA +#define CONFIG_SMSTP8_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP9_ENA +#define CONFIG_SMSTP9_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP10_ENA +#define CONFIG_SMSTP10_ENA 0x00 +#endif +#ifndef CONFIG_SMSTP11_ENA +#define CONFIG_SMSTP11_ENA 0x00 +#endif + +#ifndef CONFIG_RMSTP0_ENA +#define CONFIG_RMSTP0_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP1_ENA +#define CONFIG_RMSTP1_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP2_ENA +#define CONFIG_RMSTP2_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP3_ENA +#define CONFIG_RMSTP3_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP4_ENA +#define CONFIG_RMSTP4_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP5_ENA +#define CONFIG_RMSTP5_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP6_ENA +#define CONFIG_RMSTP6_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP7_ENA +#define CONFIG_RMSTP7_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP8_ENA +#define CONFIG_RMSTP8_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP9_ENA +#define CONFIG_RMSTP9_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP10_ENA +#define CONFIG_RMSTP10_ENA 0x00 +#endif +#ifndef CONFIG_RMSTP11_ENA +#define CONFIG_RMSTP11_ENA 0x00 +#endif + +struct mstp_ctl { + u32 s_addr; + u32 s_dis; + u32 s_ena; + u32 r_addr; + u32 r_dis; + u32 r_ena; +}; + +#endif /* __ASM_ARCH_RCAR_MSTP_H */ diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c2410.h b/arch/arm/include/asm/arch-s3c24x0/s3c2410.h index ce4186f..8773ce3 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c2410.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c2410.h @@ -83,9 +83,9 @@ static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; } -static inline struct s3c2410_nand *s3c2410_get_base_nand(void) +static inline struct s3c24x0_nand *s3c24x0_get_base_nand(void) { - return (struct s3c2410_nand *)S3C2410_NAND_BASE; + return (struct s3c24x0_nand *)S3C2410_NAND_BASE; } static inline struct s3c24x0_uart diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c2440.h b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h index 3f44bdc..7a525f2 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c2440.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c2440.h @@ -81,9 +81,9 @@ static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; } -static inline struct s3c2440_nand *s3c2440_get_base_nand(void) +static inline struct s3c24x0_nand *s3c24x0_get_base_nand(void) { - return (struct s3c2440_nand *)S3C2440_NAND_BASE; + return (struct s3c24x0_nand *)S3C2440_NAND_BASE; } static inline struct s3c24x0_uart diff --git a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h index ed9df34..2dae9fc 100644 --- a/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h +++ b/arch/arm/include/asm/arch-s3c24x0/s3c24x0.h @@ -135,34 +135,33 @@ struct s3c24x0_lcd { }; -#ifdef CONFIG_S3C2410 -/* NAND FLASH (see S3C2410 manual chapter 6) */ -struct s3c2410_nand { - u32 nfconf; - u32 nfcmd; - u32 nfaddr; - u32 nfdata; - u32 nfstat; - u32 nfecc; -}; -#endif -#ifdef CONFIG_S3C2440 -/* NAND FLASH (see S3C2440 manual chapter 6) */ -struct s3c2440_nand { +/* NAND FLASH (see manual chapter 6) */ +struct s3c24x0_nand { u32 nfconf; +#ifndef CONFIG_S3C2410 u32 nfcont; +#endif u32 nfcmd; u32 nfaddr; u32 nfdata; +#ifndef CONFIG_S3C2410 u32 nfeccd0; u32 nfeccd1; u32 nfeccd; +#endif u32 nfstat; +#ifdef CONFIG_S3C2410 + u32 nfecc; +#else u32 nfstat0; u32 nfstat1; -}; + u32 nfmecc0; + u32 nfmecc1; + u32 nfsecc; + u32 nfsblk; + u32 nfeblk; #endif - +}; /* UART (see manual chapter 11) */ struct s3c24x0_uart { diff --git a/arch/arm/include/asm/arch-stv0991/gpio.h b/arch/arm/include/asm/arch-stv0991/gpio.h new file mode 100644 index 0000000..9131ded --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/gpio.h @@ -0,0 +1,22 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_STV0991_GPIO_H +#define __ASM_ARCH_STV0991_GPIO_H + +enum gpio_direction { + GPIO_DIRECTION_IN, + GPIO_DIRECTION_OUT, +}; + +struct gpio_regs { + u32 data; /* offset 0x0 */ + u32 reserved[0xff]; /* 0x4--0x3fc */ + u32 dir; /* offset 0x400 */ +}; + +#endif /* __ASM_ARCH_STV0991_GPIO_H */ diff --git a/arch/arm/include/asm/arch-stv0991/hardware.h b/arch/arm/include/asm/arch-stv0991/hardware.h new file mode 100644 index 0000000..3f6bcaf --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/hardware.h @@ -0,0 +1,73 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARCH_HARDWARE_H +#define _ASM_ARCH_HARDWARE_H + +/* STV0991 */ +#define SRAM0_BASE_ADDR 0x00000000UL +#define SRAM1_BASE_ADDR 0x00068000UL +#define SRAM2_BASE_ADDR 0x000D0000UL +#define SRAM3_BASE_ADDR 0x00138000UL +#define CFS_SRAM0_BASE_ADDR 0x00198000UL +#define CFS_SRAM1_BASE_ADDR 0x001B8000UL +#define FAST_SRAM_BASE_ADDR 0x001D8000UL +#define FLASH_BASE_ADDR 0x40000000UL +#define PL310_BASE_ADDR 0x70000000UL +#define HSAXIM_BASE_ADDR 0x70100000UL +#define IMGSS_BASE_ADDR 0x70200000UL +#define ADC_BASE_ADDR 0x80000000UL +#define GPIOA_BASE_ADDR 0x80001000UL +#define GPIOB_BASE_ADDR 0x80002000UL +#define GPIOC_BASE_ADDR 0x80003000UL +#define HDM_BASE_ADDR 0x80004000UL +#define THSENS_BASE_ADDR 0x80200000UL +#define GPTIMER2_BASE_ADDR 0x80201000UL +#define GPTIMER1_BASE_ADDR 0x80202000UL +#define QSPI_BASE_ADDR 0x80203000UL +#define CGU_BASE_ADDR 0x80204000UL +#define CREG_BASE_ADDR 0x80205000UL +#define PEC_BASE_ADDR 0x80206000UL +#define WDRU_BASE_ADDR 0x80207000UL +#define BSEC_BASE_ADDR 0x80208000UL +#define DAP_ROM_BASE_ADDR 0x80210000UL +#define SOC_CTI_BASE_ADDR 0x80211000UL +#define TPIU_BASE_ADDR 0x80212000UL +#define TMC_ETF_BASE_ADDR 0x80213000UL +#define R4_ETM_BASE_ADDR 0x80214000UL +#define R4_CTI_BASE_ADDR 0x80215000UL +#define R4_DBG_BASE_ADDR 0x80216000UL +#define GMAC_BASE_ADDR 0x80300000UL +#define RNSS_BASE_ADDR 0x80302000UL +#define CRYP_BASE_ADDR 0x80303000UL +#define HASH_BASE_ADDR 0x80304000UL +#define GPDMA_BASE_ADDR 0x80305000UL +#define ISA_BASE_ADDR 0x8032A000UL +#define HCI_BASE_ADDR 0x80400000UL +#define I2C1_BASE_ADDR 0x80401000UL +#define I2C2_BASE_ADDR 0x80402000UL +#define SAI_BASE_ADDR 0x80403000UL +#define USI_BASE_ADDR 0x80404000UL +#define SPI1_BASE_ADDR 0x80405000UL +#define UART_BASE_ADDR 0x80406000UL +#define SPI2_BASE_ADDR 0x80500000UL +#define CAN_BASE_ADDR 0x80501000UL +#define USART1_BASE_ADDR 0x80502000UL +#define USART2_BASE_ADDR 0x80503000UL +#define USART3_BASE_ADDR 0x80504000UL +#define USART4_BASE_ADDR 0x80505000UL +#define USART5_BASE_ADDR 0x80506000UL +#define USART6_BASE_ADDR 0x80507000UL +#define SDI2_BASE_ADDR 0x80600000UL +#define SDI1_BASE_ADDR 0x80601000UL +#define VICA_BASE_ADDR 0x81000000UL +#define VICB_BASE_ADDR 0x81001000UL +#define STM_CHANNELS_BASE_ADDR 0x81100000UL +#define STM_BASE_ADDR 0x81110000UL +#define SROM_BASE_ADDR 0xFFFF0000UL + +#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h b/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h new file mode 100644 index 0000000..ddcbb57 --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h @@ -0,0 +1,116 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _STV0991_CGU_H +#define _STV0991_CGU_H + +struct stv0991_cgu_regs { + u32 cpu_freq; /* offset 0x0 */ + u32 icn2_freq; /* offset 0x4 */ + u32 dma_freq; /* offset 0x8 */ + u32 isp_freq; /* offset 0xc */ + u32 h264_freq; /* offset 0x10 */ + u32 osif_freq; /* offset 0x14 */ + u32 ren_freq; /* offset 0x18 */ + u32 tim_freq; /* offset 0x1c */ + u32 sai_freq; /* offset 0x20 */ + u32 eth_freq; /* offset 0x24 */ + u32 i2c_freq; /* offset 0x28 */ + u32 spi_freq; /* offset 0x2c */ + u32 uart_freq; /* offset 0x30 */ + u32 qspi_freq; /* offset 0x34 */ + u32 sdio_freq; /* offset 0x38 */ + u32 usi_freq; /* offset 0x3c */ + u32 can_line_freq; /* offset 0x40 */ + u32 debug_freq; /* offset 0x44 */ + u32 trace_freq; /* offset 0x48 */ + u32 stm_freq; /* offset 0x4c */ + u32 eth_ctrl; /* offset 0x50 */ + u32 reserved[3]; /* offset 0x54 */ + u32 osc_ctrl; /* offset 0x60 */ + u32 pll1_ctrl; /* offset 0x64 */ + u32 pll1_freq; /* offset 0x68 */ + u32 pll1_fract; /* offset 0x6c */ + u32 pll1_spread; /* offset 0x70 */ + u32 pll1_status; /* offset 0x74 */ + u32 pll2_ctrl; /* offset 0x78 */ + u32 pll2_freq; /* offset 0x7c */ + u32 pll2_fract; /* offset 0x80 */ + u32 pll2_spread; /* offset 0x84 */ + u32 pll2_status; /* offset 0x88 */ + u32 cgu_enable_1; /* offset 0x8c */ + u32 cgu_enable_2; /* offset 0x90 */ + u32 cgu_isp_pulse; /* offset 0x94 */ + u32 cgu_h264_pulse; /* offset 0x98 */ + u32 cgu_osif_pulse; /* offset 0x9c */ + u32 cgu_ren_pulse; /* offset 0xa0 */ + +}; + +/* CGU Timer */ +#define CLK_TMR_OSC 0 +#define CLK_TMR_MCLK 1 +#define CLK_TMR_PLL1 2 +#define CLK_TMR_PLL2 3 +#define MDIV_SHIFT_TMR 3 +#define DIV_SHIFT_TMR 6 + +#define TIMER1_CLK_CFG (0 << DIV_SHIFT_TMR \ + | 0 << MDIV_SHIFT_TMR | CLK_TMR_MCLK) + +/* Clock Enable/Disable */ + +#define TIMER1_CLK_EN (1 << 15) + +/* CGU Uart config */ +#define CLK_UART_MCLK 0 +#define CLK_UART_PLL1 1 +#define CLK_UART_PLL2 2 + +#define MDIV_SHIFT_UART 3 +#define DIV_SHIFT_UART 6 + +#define UART_CLK_CFG (4 << DIV_SHIFT_UART \ + | 1 << MDIV_SHIFT_UART | CLK_UART_MCLK) + +/* CGU Ethernet clock config */ +#define CLK_ETH_MCLK 0 +#define CLK_ETH_PLL1 1 +#define CLK_ETH_PLL2 2 + +#define MDIV_SHIFT_ETH 3 +#define DIV_SHIFT_ETH 6 +#define DIV_ETH_125 9 +#define DIV_ETH_50 12 +#define DIV_ETH_P2P 15 + +#define ETH_CLK_CFG (4 << DIV_ETH_P2P | 4 << DIV_ETH_50 \ + | 1 << DIV_ETH_125 \ + | 0 << DIV_SHIFT_ETH \ + | 3 << MDIV_SHIFT_ETH | CLK_ETH_PLL1) + /* CGU Ethernet control */ + +#define ETH_CLK_TX_EXT_PHY 0 +#define ETH_CLK_TX_125M 1 +#define ETH_CLK_TX_25M 2 +#define ETH_CLK_TX_2M5 3 +#define ETH_CLK_TX_DIS 7 + +#define ETH_CLK_RX_EXT_PHY 0 +#define ETH_CLK_RX_25M 1 +#define ETH_CLK_RX_2M5 2 +#define ETH_CLK_RX_DIS 3 +#define RX_CLK_SHIFT 3 +#define ETH_CLK_MASK ~(0x1F) + +#define ETH_PHY_MODE_GMII 0 +#define ETH_PHY_MODE_RMII 1 +#define ETH_PHY_CLK_DIS 1 + +#define ETH_CLK_CTRL (ETH_CLK_RX_EXT_PHY << RX_CLK_SHIFT \ + | ETH_CLK_TX_EXT_PHY) +#endif diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_creg.h b/arch/arm/include/asm/arch-stv0991/stv0991_creg.h new file mode 100644 index 0000000..c804eb5 --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/stv0991_creg.h @@ -0,0 +1,95 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _STV0991_CREG_H +#define _STV0991_CREG_H + +struct stv0991_creg { + u32 version; /* offset 0x0 */ + u32 hdpctl; /* offset 0x4 */ + u32 hdpval; /* offset 0x8 */ + u32 hdpgposet; /* offset 0xc */ + u32 hdpgpoclr; /* offset 0x10 */ + u32 hdpgpoval; /* offset 0x14 */ + u32 stm_mux; /* offset 0x18 */ + u32 sysctrl_1; /* offset 0x1c */ + u32 sysctrl_2; /* offset 0x20 */ + u32 sysctrl_3; /* offset 0x24 */ + u32 sysctrl_4; /* offset 0x28 */ + u32 reserved_1[0x35]; /* offset 0x2C-0xFC */ + u32 mux1; /* offset 0x100 */ + u32 mux2; /* offset 0x104 */ + u32 mux3; /* offset 0x108 */ + u32 mux4; /* offset 0x10c */ + u32 mux5; /* offset 0x110 */ + u32 mux6; /* offset 0x114 */ + u32 mux7; /* offset 0x118 */ + u32 mux8; /* offset 0x11c */ + u32 mux9; /* offset 0x120 */ + u32 mux10; /* offset 0x124 */ + u32 mux11; /* offset 0x128 */ + u32 mux12; /* offset 0x12c */ + u32 mux13; /* offset 0x130 */ + u32 reserved_2[0x33]; /* offset 0x134-0x1FC */ + u32 cfg_pad1; /* offset 0x200 */ + u32 cfg_pad2; /* offset 0x204 */ + u32 cfg_pad3; /* offset 0x208 */ + u32 cfg_pad4; /* offset 0x20c */ + u32 cfg_pad5; /* offset 0x210 */ + u32 cfg_pad6; /* offset 0x214 */ + u32 cfg_pad7; /* offset 0x218 */ + u32 reserved_3[0x39]; /* offset 0x21C-0x2FC */ + u32 vdd_pad1; /* offset 0x300 */ + u32 vdd_pad2; /* offset 0x304 */ + u32 reserved_4[0x3e]; /* offset 0x308-0x3FC */ + u32 vdd_comp1; /* offset 0x400 */ +}; + +/* CREG MUX 12 register */ +#define GPIOC_30_MUX_SHIFT 24 +#define GPIOC_30_MUX_MASK ~(1 << GPIOC_30_MUX_SHIFT) +#define CFG_GPIOC_30_UART_TX (1 << GPIOC_30_MUX_SHIFT) + +#define GPIOC_31_MUX_SHIFT 28 +#define GPIOC_31_MUX_MASK ~(1 << GPIOC_31_MUX_SHIFT) +#define CFG_GPIOC_31_UART_RX (1 << GPIOC_31_MUX_SHIFT) + +/* CREG MUX 7 register */ +#define GPIOB_16_MUX_SHIFT 0 +#define GPIOB_16_MUX_MASK ~(1 << GPIOB_16_MUX_SHIFT) +#define CFG_GPIOB_16_UART_TX (1 << GPIOB_16_MUX_SHIFT) + +#define GPIOB_17_MUX_SHIFT 4 +#define GPIOB_17_MUX_MASK ~(1 << GPIOB_17_MUX_SHIFT) +#define CFG_GPIOB_17_UART_RX (1 << GPIOB_17_MUX_SHIFT) + +/* CREG CFG_PAD6 register */ + +#define GPIOC_31_MODE_SHIFT 30 +#define GPIOC_31_MODE_MASK ~(1 << GPIOC_31_MODE_SHIFT) +#define CFG_GPIOC_31_MODE_OD (0 << GPIOC_31_MODE_SHIFT) +#define CFG_GPIOC_31_MODE_PP (1 << GPIOC_31_MODE_SHIFT) + +#define GPIOC_30_MODE_SHIFT 28 +#define GPIOC_30_MODE_MASK ~(1 << GPIOC_30_MODE_SHIFT) +#define CFG_GPIOC_30_MODE_LOW (0 << GPIOC_30_MODE_SHIFT) +#define CFG_GPIOC_30_MODE_HIGH (1 << GPIOC_30_MODE_SHIFT) + +/* CREG Ethernet pad config */ + +#define VDD_ETH_PS_1V8 0 +#define VDD_ETH_PS_2V5 2 +#define VDD_ETH_PS_3V3 3 +#define VDD_ETH_PS_MASK 0x3 + +#define VDD_ETH_PS_SHIFT 12 +#define ETH_VDD_CFG (VDD_ETH_PS_1V8 << VDD_ETH_PS_SHIFT) + +#define VDD_ETH_M_PS_SHIFT 28 +#define ETH_M_VDD_CFG (VDD_ETH_PS_1V8 << VDD_ETH_M_PS_SHIFT) + +#endif diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_defs.h b/arch/arm/include/asm/arch-stv0991/stv0991_defs.h new file mode 100644 index 0000000..1151378 --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/stv0991_defs.h @@ -0,0 +1,16 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __STV0991_DEFS_H__ +#define __STV0991_DEFS_H__ +#include <asm/arch/stv0991_periph.h> + +extern int stv0991_pinmux_config(enum periph_id); +extern int clock_setup(enum periph_clock); + +#endif + diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h b/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h new file mode 100644 index 0000000..abd7257 --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h @@ -0,0 +1,43 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _STV0991_GPT_H +#define _STV0991_GPT_H + +#include <asm/arch-stv0991/hardware.h> + +struct gpt_regs { + u32 cr1; + u32 cr2; + u32 reserved_1; + u32 dier; /* dma_int_en */ + u32 sr; /* status reg */ + u32 egr; /* event gen */ + u32 reserved_2[3]; /* offset 0x18--0x20*/ + u32 cnt; + u32 psc; + u32 arr; +}; + +struct gpt_regs *const gpt1_regs_ptr = + (struct gpt_regs *) GPTIMER1_BASE_ADDR; + +/* Timer control1 register */ +#define GPT_CR1_CEN 0x0001 +#define GPT_MODE_AUTO_RELOAD (1 << 7) + +/* Timer prescalar reg */ +#define GPT_PRESCALER_128 0x128 + +/* Auto reload register for free running config */ +#define GPT_FREE_RUNNING 0xFFFF + +/* Timer, HZ specific defines */ +#define CONFIG_STV0991_HZ 1000 +#define CONFIG_STV0991_HZ_CLOCK (27*1000*1000)/GPT_PRESCALER_128 + +#endif diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_periph.h b/arch/arm/include/asm/arch-stv0991/stv0991_periph.h new file mode 100644 index 0000000..f728c83 --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/stv0991_periph.h @@ -0,0 +1,44 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARM_ARCH_PERIPH_H +#define __ASM_ARM_ARCH_PERIPH_H + +/* + * Peripherals required for pinmux configuration. List will + * grow with support for more devices getting added. + * Numbering based on interrupt table. + * + */ +enum periph_id { + UART_GPIOC_30_31 = 0, + UART_GPIOB_16_17, + ETH_GPIOB_10_31_C_0_4, + PERIPH_ID_I2C0, + PERIPH_ID_I2C1, + PERIPH_ID_I2C2, + PERIPH_ID_I2C3, + PERIPH_ID_I2C4, + PERIPH_ID_I2C5, + PERIPH_ID_I2C6, + PERIPH_ID_I2C7, + PERIPH_ID_SPI0, + PERIPH_ID_SPI1, + PERIPH_ID_SPI2, + PERIPH_ID_SDMMC0, + PERIPH_ID_SDMMC1, + PERIPH_ID_SDMMC2, + PERIPH_ID_SDMMC3, + PERIPH_ID_I2S1, +}; + +enum periph_clock { + UART_CLOCK_CFG = 0, + ETH_CLOCK_CFG, +}; + +#endif /* __ASM_ARM_ARCH_PERIPH_H */ diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h b/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h new file mode 100644 index 0000000..7e555a2 --- /dev/null +++ b/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h @@ -0,0 +1,28 @@ +/* + * (C) Copyright 2014 + * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _STV0991_WD_RST_H +#define _STV0991_WD_RST_H +#include <asm/arch-stv0991/hardware.h> + +struct stv0991_wd_ru { + u32 wdru_config; + u32 wdru_ctrl1; + u32 wdru_ctrl2; + u32 wdru_tim; + u32 wdru_count; + u32 wdru_stat; + u32 wdru_wrlock; +}; + +struct stv0991_wd_ru *const stv0991_wd_ru_ptr = \ + (struct stv0991_wd_ru *)WDRU_BASE_ADDR; + +/* Watchdog control register */ +#define WDRU_RST_SYS 0x1 + +#endif diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h index b40c16b..64acff3 100644 --- a/arch/arm/include/asm/arch-sunxi/clock.h +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -25,9 +25,11 @@ int clock_init(void); int clock_twi_onoff(int port, int state); void clock_set_pll1(unsigned int hz); +void clock_set_pll3(unsigned int hz); void clock_set_pll5(unsigned int hz); unsigned int clock_get_pll5p(void); unsigned int clock_get_pll6(void); +void clock_set_de_mod_clock(u32 *clk_cfg, unsigned int hz); void clock_init_safe(void); void clock_init_uart(void); #endif diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h index 9dca800..eb88969 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h @@ -62,7 +62,7 @@ struct sunxi_ccm_reg { u32 gps_clk_cfg; /* 0xd0 */ u32 spi3_clk_cfg; /* 0xd4 */ u8 res5[0x28]; - u32 dram_clk_cfg; /* 0x100 */ + u32 dram_clk_gate; /* 0x100 */ u32 be0_clk_cfg; /* 0x104 */ u32 be1_clk_cfg; /* 0x108 */ u32 fe0_clk_cfg; /* 0x10c */ @@ -186,12 +186,20 @@ struct sunxi_ccm_reg { /* ahb clock gate bit offset (second register) */ #define AHB_GATE_OFFSET_GMAC 17 +#define AHB_GATE_OFFSET_DE_BE0 12 +#define AHB_GATE_OFFSET_HDMI 11 +#define AHB_GATE_OFFSET_LCD1 5 +#define AHB_GATE_OFFSET_LCD0 4 #define CCM_AHB_GATE_GPS (0x1 << 26) #define CCM_AHB_GATE_SDRAM (0x1 << 14) #define CCM_AHB_GATE_DLL (0x1 << 15) #define CCM_AHB_GATE_ACE (0x1 << 16) +#define CCM_PLL3_CTRL_M(n) (((n) & 0x7f) << 0) +#define CCM_PLL3_CTRL_INTEGER_MODE (0x1 << 15) +#define CCM_PLL3_CTRL_EN (0x1 << 31) + #define CCM_PLL5_CTRL_M(n) (((n) & 0x3) << 0) #define CCM_PLL5_CTRL_M_MASK CCM_PLL5_CTRL_M(0x3) #define CCM_PLL5_CTRL_M_X(n) ((n) - 1) @@ -253,6 +261,34 @@ struct sunxi_ccm_reg { #define CCM_MMC_CTRL_ENABLE (0x1 << 31) +#define CCM_DRAM_GATE_OFFSET_DE_BE0 26 + +#define CCM_LCD_CH0_CTRL_PLL3 (0 << 24) +#define CCM_LCD_CH0_CTRL_PLL7 (1 << 24) +#define CCM_LCD_CH0_CTRL_PLL3_2X (2 << 24) +#define CCM_LCD_CH0_CTRL_PLL7_2X (3 << 24) +#define CCM_LCD_CH0_CTRL_RST (0x1 << 30) +#define CCM_LCD_CH0_CTRL_GATE (0x1 << 31) + +#define CCM_LCD_CH1_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +/* We leave bit 11 set to 0, so sclk1 == sclk2 */ +#define CCM_LCD_CH1_CTRL_PLL3 (0 << 24) +#define CCM_LCD_CH1_CTRL_PLL7 (1 << 24) +#define CCM_LCD_CH1_CTRL_PLL3_2X (2 << 24) +#define CCM_LCD_CH1_CTRL_PLL7_2X (3 << 24) +/* Enable / disable both ch1 sclk1 and sclk2 at the same time */ +#define CCM_LCD_CH1_CTRL_GATE (0x1 << 31 | 0x1 << 15) + +#define CCM_HDMI_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_HDMI_CTRL_PLL_MASK (3 << 24) +#define CCM_HDMI_CTRL_PLL3 (0 << 24) +#define CCM_HDMI_CTRL_PLL7 (1 << 24) +#define CCM_HDMI_CTRL_PLL3_2X (2 << 24) +#define CCM_HDMI_CTRL_PLL7_2X (3 << 24) +/* No separate ddc gate on sun4i, sun5i and sun7i */ +#define CCM_HDMI_CTRL_DDC_GATE 0 +#define CCM_HDMI_CTRL_GATE (0x1 << 31) + #define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0 #define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1 #define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2 @@ -266,4 +302,13 @@ struct sunxi_ccm_reg { #define CCM_USB_CTRL_PHY1_CLK 0 #define CCM_USB_CTRL_PHY2_CLK 0 +/* CCM bits common to all Display Engine (and IEP) clock ctrl regs */ +#define CCM_DE_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_DE_CTRL_PLL_MASK (3 << 24) +#define CCM_DE_CTRL_PLL3 (0 << 24) +#define CCM_DE_CTRL_PLL7 (1 << 24) +#define CCM_DE_CTRL_PLL5P (2 << 24) +#define CCM_DE_CTRL_RST (1 << 30) +#define CCM_DE_CTRL_GATE (1 << 31) + #endif /* _SUNXI_CLOCK_SUN4I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index e16a764..3599054 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -176,13 +176,18 @@ struct sunxi_ccm_reg { #define CCM_PLL1_CTRL_MAGIC (0x1 << 16) #define CCM_PLL1_CTRL_EN (0x1 << 31) +#define CCM_PLL3_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_PLL3_CTRL_N(n) ((((n) - 1) & 0x7f) << 8) +#define CCM_PLL3_CTRL_INTEGER_MODE (0x1 << 24) +#define CCM_PLL3_CTRL_EN (0x1 << 31) + #define CCM_PLL5_CTRL_M(n) ((((n) - 1) & 0x3) << 0) #define CCM_PLL5_CTRL_K(n) ((((n) - 1) & 0x3) << 4) #define CCM_PLL5_CTRL_N(n) ((((n) - 1) & 0x1f) << 8) #define CCM_PLL5_CTRL_UPD (0x1 << 20) #define CCM_PLL5_CTRL_EN (0x1 << 31) -#define PLL6_CFG_DEFAULT 0x90041811 +#define PLL6_CFG_DEFAULT 0x90041811 /* 600 MHz */ #define CCM_PLL6_CTRL_N_SHIFT 8 #define CCM_PLL6_CTRL_N_MASK (0x1f << CCM_PLL6_CTRL_N_SHIFT) @@ -193,17 +198,26 @@ struct sunxi_ccm_reg { #define AXI_GATE_OFFSET_DRAM 0 +/* ahb_gate0 offsets */ #define AHB_GATE_OFFSET_USB_OHCI1 30 #define AHB_GATE_OFFSET_USB_OHCI0 29 #define AHB_GATE_OFFSET_USB_EHCI1 27 #define AHB_GATE_OFFSET_USB_EHCI0 26 #define AHB_GATE_OFFSET_MCTL 14 +#define AHB_GATE_OFFSET_GMAC 17 #define AHB_GATE_OFFSET_MMC3 11 #define AHB_GATE_OFFSET_MMC2 10 #define AHB_GATE_OFFSET_MMC1 9 #define AHB_GATE_OFFSET_MMC0 8 #define AHB_GATE_OFFSET_MMC(n) (AHB_GATE_OFFSET_MMC0 + (n)) +/* ahb_gate1 offsets */ +#define AHB_GATE_OFFSET_DRC0 25 +#define AHB_GATE_OFFSET_DE_BE0 12 +#define AHB_GATE_OFFSET_HDMI 11 +#define AHB_GATE_OFFSET_LCD1 5 +#define AHB_GATE_OFFSET_LCD0 4 + #define CCM_MMC_CTRL_OSCM24 (0x0 << 24) #define CCM_MMC_CTRL_PLL6 (0x1 << 24) @@ -216,6 +230,12 @@ struct sunxi_ccm_reg { #define CCM_USB_CTRL_PHY1_CLK (0x1 << 9) #define CCM_USB_CTRL_PHY2_CLK (0x1 << 10) +#define CCM_GMAC_CTRL_TX_CLK_SRC_MII 0x0 +#define CCM_GMAC_CTRL_TX_CLK_SRC_EXT_RGMII 0x1 +#define CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII 0x2 +#define CCM_GMAC_CTRL_GPIT_MII (0x0 << 2) +#define CCM_GMAC_CTRL_GPIT_RGMII (0x1 << 2) + #define MDFS_CLK_DEFAULT 0x81000002 /* PLL6 / 3 */ #define CCM_DRAMCLK_CFG_DIV0(x) ((x - 1) << 8) @@ -223,8 +243,35 @@ struct sunxi_ccm_reg { #define CCM_DRAMCLK_CFG_UPD (0x1 << 16) #define CCM_DRAMCLK_CFG_RST (0x1 << 31) +#define CCM_DRAM_GATE_OFFSET_DE_BE0 26 + +#define CCM_LCD_CH0_CTRL_PLL3 (0 << 24) +#define CCM_LCD_CH0_CTRL_PLL7 (1 << 24) +#define CCM_LCD_CH0_CTRL_PLL3_2X (2 << 24) +#define CCM_LCD_CH0_CTRL_PLL7_2X (3 << 24) +#define CCM_LCD_CH0_CTRL_MIPI_PLL (4 << 24) +#define CCM_LCD_CH0_CTRL_GATE (0x1 << 31) + +#define CCM_LCD_CH1_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_LCD_CH1_CTRL_PLL3 (0 << 24) +#define CCM_LCD_CH1_CTRL_PLL7 (1 << 24) +#define CCM_LCD_CH1_CTRL_PLL3_2X (2 << 24) +#define CCM_LCD_CH1_CTRL_PLL7_2X (3 << 24) +#define CCM_LCD_CH1_CTRL_GATE (0x1 << 31) + +#define CCM_HDMI_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_HDMI_CTRL_PLL_MASK (3 << 24) +#define CCM_HDMI_CTRL_PLL3 (0 << 24) +#define CCM_HDMI_CTRL_PLL7 (1 << 24) +#define CCM_HDMI_CTRL_PLL3_2X (2 << 24) +#define CCM_HDMI_CTRL_PLL7_2X (3 << 24) +#define CCM_HDMI_CTRL_DDC_GATE (0x1 << 30) +#define CCM_HDMI_CTRL_GATE (0x1 << 31) + #define MBUS_CLK_DEFAULT 0x81000001 /* PLL6 / 2 */ +/* ahb_reset0 offsets */ +#define AHB_RESET_OFFSET_GMAC 17 #define AHB_RESET_OFFSET_MCTL 14 #define AHB_RESET_OFFSET_MMC3 11 #define AHB_RESET_OFFSET_MMC2 10 @@ -232,10 +279,28 @@ struct sunxi_ccm_reg { #define AHB_RESET_OFFSET_MMC0 8 #define AHB_RESET_OFFSET_MMC(n) (AHB_RESET_OFFSET_MMC0 + (n)) +/* ahb_reset0 offsets */ +#define AHB_RESET_OFFSET_DRC0 25 +#define AHB_RESET_OFFSET_DE_BE0 12 +#define AHB_RESET_OFFSET_HDMI 11 +#define AHB_RESET_OFFSET_LCD1 5 +#define AHB_RESET_OFFSET_LCD0 4 + /* apb2 reset */ #define APB2_RESET_UART_SHIFT (16) #define APB2_RESET_UART_MASK (0xff << APB2_RESET_UART_SHIFT) #define APB2_RESET_TWI_SHIFT (0) #define APB2_RESET_TWI_MASK (0xf << APB2_RESET_TWI_SHIFT) +/* CCM bits common to all Display Engine (and IEP) clock ctrl regs */ +#define CCM_DE_CTRL_M(n) ((((n) - 1) & 0xf) << 0) +#define CCM_DE_CTRL_PLL_MASK (0xf << 24) +#define CCM_DE_CTRL_PLL3 (0 << 24) +#define CCM_DE_CTRL_PLL7 (1 << 24) +#define CCM_DE_CTRL_PLL6_2X (2 << 24) +#define CCM_DE_CTRL_PLL8 (3 << 24) +#define CCM_DE_CTRL_PLL9 (4 << 24) +#define CCM_DE_CTRL_PLL10 (5 << 24) +#define CCM_DE_CTRL_GATE (1 << 31) + #endif /* _SUNXI_CLOCK_SUN6I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h index bdee89e..2c92b5c 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu.h +++ b/arch/arm/include/asm/arch-sunxi/cpu.h @@ -99,9 +99,13 @@ #define SUNXI_SCR_BASE 0x01c2c400 +#ifndef CONFIG_MACH_SUN6I #define SUNXI_GPS_BASE 0x01c30000 #define SUNXI_MALI400_BASE 0x01c40000 #define SUNXI_GMAC_BASE 0x01c50000 +#else +#define SUNXI_GMAC_BASE 0x01c30000 +#endif #define SUNXI_DRAM_COM_BASE 0x01c62000 #define SUNXI_DRAM_CTL0_BASE 0x01c63000 diff --git a/arch/arm/include/asm/arch-sunxi/display.h b/arch/arm/include/asm/arch-sunxi/display.h new file mode 100644 index 0000000..ddb71c1 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/display.h @@ -0,0 +1,187 @@ +/* + * Sunxi platform display controller register and constant defines + * + * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_DISPLAY_H +#define _SUNXI_DISPLAY_H + +struct sunxi_de_be_reg { + u8 res0[0x800]; /* 0x000 */ + u32 mode; /* 0x800 */ + u32 backcolor; /* 0x804 */ + u32 disp_size; /* 0x808 */ + u8 res1[0x4]; /* 0x80c */ + u32 layer0_size; /* 0x810 */ + u32 layer1_size; /* 0x814 */ + u32 layer2_size; /* 0x818 */ + u32 layer3_size; /* 0x81c */ + u32 layer0_pos; /* 0x820 */ + u32 layer1_pos; /* 0x824 */ + u32 layer2_pos; /* 0x828 */ + u32 layer3_pos; /* 0x82c */ + u8 res2[0x10]; /* 0x830 */ + u32 layer0_stride; /* 0x840 */ + u32 layer1_stride; /* 0x844 */ + u32 layer2_stride; /* 0x848 */ + u32 layer3_stride; /* 0x84c */ + u32 layer0_addr_low32b; /* 0x850 */ + u32 layer1_addr_low32b; /* 0x854 */ + u32 layer2_addr_low32b; /* 0x858 */ + u32 layer3_addr_low32b; /* 0x85c */ + u32 layer0_addr_high4b; /* 0x860 */ + u32 layer1_addr_high4b; /* 0x864 */ + u32 layer2_addr_high4b; /* 0x868 */ + u32 layer3_addr_high4b; /* 0x86c */ + u32 reg_ctrl; /* 0x870 */ + u8 res3[0xc]; /* 0x874 */ + u32 color_key_max; /* 0x880 */ + u32 color_key_min; /* 0x884 */ + u32 color_key_config; /* 0x888 */ + u8 res4[0x4]; /* 0x88c */ + u32 layer0_attr0_ctrl; /* 0x890 */ + u32 layer1_attr0_ctrl; /* 0x894 */ + u32 layer2_attr0_ctrl; /* 0x898 */ + u32 layer3_attr0_ctrl; /* 0x89c */ + u32 layer0_attr1_ctrl; /* 0x8a0 */ + u32 layer1_attr1_ctrl; /* 0x8a4 */ + u32 layer2_attr1_ctrl; /* 0x8a8 */ + u32 layer3_attr1_ctrl; /* 0x8ac */ +}; + +struct sunxi_lcdc_reg { + u32 ctrl; /* 0x00 */ + u32 int0; /* 0x04 */ + u32 int1; /* 0x08 */ + u8 res0[0x04]; /* 0x0c */ + u32 frame_ctrl; /* 0x10 */ + u8 res1[0x2c]; /* 0x14 */ + u32 tcon0_ctrl; /* 0x40 */ + u32 tcon0_dclk; /* 0x44 */ + u32 tcon0_basic_timing0; /* 0x48 */ + u32 tcon0_basic_timing1; /* 0x4c */ + u32 tcon0_basic_timing2; /* 0x50 */ + u32 tcon0_basic_timing3; /* 0x54 */ + u32 tcon0_hv_intf; /* 0x58 */ + u8 res2[0x04]; /* 0x5c */ + u32 tcon0_cpu_intf; /* 0x60 */ + u32 tcon0_cpu_wr_dat; /* 0x64 */ + u32 tcon0_cpu_rd_dat0; /* 0x68 */ + u32 tcon0_cpu_rd_dat1; /* 0x6c */ + u32 tcon0_ttl_timing0; /* 0x70 */ + u32 tcon0_ttl_timing1; /* 0x74 */ + u32 tcon0_ttl_timing2; /* 0x78 */ + u32 tcon0_ttl_timing3; /* 0x7c */ + u32 tcon0_ttl_timing4; /* 0x80 */ + u32 tcon0_lvds_intf; /* 0x84 */ + u32 tcon0_io_polarity; /* 0x88 */ + u32 tcon0_io_tristate; /* 0x8c */ + u32 tcon1_ctrl; /* 0x90 */ + u32 tcon1_timing_source; /* 0x94 */ + u32 tcon1_timing_scale; /* 0x98 */ + u32 tcon1_timing_out; /* 0x9c */ + u32 tcon1_timing_h; /* 0xa0 */ + u32 tcon1_timing_v; /* 0xa4 */ + u32 tcon1_timing_sync; /* 0xa8 */ + u8 res3[0x44]; /* 0xac */ + u32 tcon1_io_polarity; /* 0xf0 */ + u32 tcon1_io_tristate; /* 0xf4 */ +}; + +struct sunxi_hdmi_reg { + u32 version_id; /* 0x000 */ + u32 ctrl; /* 0x004 */ + u32 irq; /* 0x008 */ + u32 hpd; /* 0x00c */ + u32 video_ctrl; /* 0x010 */ + u32 video_size; /* 0x014 */ + u32 video_bp; /* 0x018 */ + u32 video_fp; /* 0x01c */ + u32 video_spw; /* 0x020 */ + u32 video_polarity; /* 0x024 */ + u8 res0[0x1d8]; /* 0x028 */ + u32 pad_ctrl0; /* 0x200 */ + u32 pad_ctrl1; /* 0x204 */ + u32 pll_ctrl; /* 0x208 */ + u32 pll_dbg0; /* 0x20c */ +}; + +/* + * DE-BE register constants. + */ +#define SUNXI_DE_BE_WIDTH(x) (((x) - 1) << 0) +#define SUNXI_DE_BE_HEIGHT(y) (((y) - 1) << 16) +#define SUNXI_DE_BE_MODE_ENABLE (1 << 0) +#define SUNXI_DE_BE_MODE_START (1 << 1) +#define SUNXI_DE_BE_MODE_LAYER0_ENABLE (1 << 8) +#define SUNXI_DE_BE_LAYER_STRIDE(x) ((x) << 5) +#define SUNXI_DE_BE_REG_CTRL_LOAD_REGS (1 << 0) +#define SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888 (0x09 << 8) + +/* + * LCDC register constants. + */ +#define SUNXI_LCDC_X(x) (((x) - 1) << 16) +#define SUNXI_LCDC_Y(y) (((y) - 1) << 0) +#define SUNXI_LCDC_CTRL_IO_MAP_MASK (1 << 0) +#define SUNXI_LCDC_CTRL_IO_MAP_TCON0 (0 << 0) +#define SUNXI_LCDC_CTRL_IO_MAP_TCON1 (1 << 0) +#define SUNXI_LCDC_CTRL_TCON_ENABLE (1 << 31) +#define SUNXI_LCDC_TCON0_DCLK_ENABLE (0xf << 28) +#define SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(n) (((n) & 0x1f) << 4) +#define SUNXI_LCDC_TCON1_CTRL_ENABLE (1 << 31) +#define SUNXI_LCDC_TCON1_TIMING_H_BP(n) (((n) - 1) << 0) +#define SUNXI_LCDC_TCON1_TIMING_H_TOTAL(n) (((n) - 1) << 16) +#define SUNXI_LCDC_TCON1_TIMING_V_BP(n) (((n) - 1) << 0) +#define SUNXI_LCDC_TCON1_TIMING_V_TOTAL(n) (((n) * 2) << 16) + +/* + * HDMI register constants. + */ +#define SUNXI_HDMI_X(x) (((x) - 1) << 0) +#define SUNXI_HDMI_Y(y) (((y) - 1) << 16) +#define SUNXI_HDMI_CTRL_ENABLE (1 << 31) +#define SUNXI_HDMI_IRQ_STATUS_FIFO_UF (1 << 0) +#define SUNXI_HDMI_IRQ_STATUS_FIFO_OF (1 << 1) +#define SUNXI_HDMI_IRQ_STATUS_BITS 0x73 +#define SUNXI_HDMI_HPD_DETECT (1 << 0) +#define SUNXI_HDMI_VIDEO_CTRL_ENABLE (1 << 31) +#define SUNXI_HDMI_VIDEO_POL_HOR (1 << 0) +#define SUNXI_HDMI_VIDEO_POL_VER (1 << 1) +#define SUNXI_HDMI_VIDEO_POL_TX_CLK (0x3e0 << 16) + +#ifdef CONFIG_MACH_SUN6I +#define SUNXI_HDMI_PAD_CTRL0_HDP 0x7e80000f +#define SUNXI_HDMI_PAD_CTRL0_RUN 0x7e8000ff +#else +#define SUNXI_HDMI_PAD_CTRL0_HDP 0xfe800000 +#define SUNXI_HDMI_PAD_CTRL0_RUN 0xfe800000 +#endif + +#ifdef CONFIG_MACH_SUN4I +#define SUNXI_HDMI_PAD_CTRL1 0x00d8c820 +#elif defined CONFIG_MACH_SUN6I +#define SUNXI_HDMI_PAD_CTRL1 0x01ded030 +#else +#define SUNXI_HDMI_PAD_CTRL1 0x00d8c830 +#endif +#define SUNXI_HDMI_PAD_CTRL1_HALVE (1 << 6) + +#ifdef CONFIG_MACH_SUN6I +#define SUNXI_HDMI_PLL_CTRL 0xba48a308 +#define SUNXI_HDMI_PLL_CTRL_DIV(n) (((n) - 1) << 4) +#else +#define SUNXI_HDMI_PLL_CTRL 0xfa4ef708 +#define SUNXI_HDMI_PLL_CTRL_DIV(n) ((n) << 4) +#endif +#define SUNXI_HDMI_PLL_CTRL_DIV_MASK (0xf << 4) + +#define SUNXI_HDMI_PLL_DBG0_PLL3 (0 << 21) +#define SUNXI_HDMI_PLL_DBG0_PLL7 (1 << 21) + +int sunxi_simplefb_setup(void *blob); + +#endif /* _SUNXI_DISPLAY_H */ diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index c734cf0..366c0dc 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -134,6 +134,7 @@ enum sunxi_gpio_number { #define SUNXI_GPIO_OUTPUT 1 #define SUNXI_GPA0_EMAC 2 +#define SUN6I_GPA0_GMAC 2 #define SUN7I_GPA0_GMAC 5 #define SUNXI_GPB0_TWI0 2 diff --git a/arch/arm/include/asm/arch-uniphier/board.h b/arch/arm/include/asm/arch-uniphier/board.h index e6ba4e4..e3cba5b 100644 --- a/arch/arm/include/asm/arch-uniphier/board.h +++ b/arch/arm/include/asm/arch-uniphier/board.h @@ -12,10 +12,12 @@ defined(CONFIG_DCC_MICRO_SUPPORT_CARD) void support_card_reset(void); void support_card_init(void); +void support_card_late_init(void); int check_support_card(void); #else #define support_card_reset() do {} while (0) #define support_card_init() do {} while (0) +#define support_card_late_init() do {} while (0) static inline int check_support_card(void) { return 0; @@ -32,4 +34,9 @@ static inline void uniphier_board_init(void) support_card_init(); } +static inline void uniphier_board_late_init(void) +{ + support_card_late_init(); +} + #endif /* ARCH_BOARD_H */ diff --git a/arch/arm/include/asm/arch-uniphier/gpio.h b/arch/arm/include/asm/arch-uniphier/gpio.h new file mode 100644 index 0000000..1fc4e19 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/gpio.h @@ -0,0 +1,6 @@ +/* + * Dummy header file to enable CONFIG_OF_CONTROL. + * If CONFIG_OF_CONTROL is enabled, lib/fdtdec.c is compiled. + * It includes <asm/arch/gpio.h> via <asm/gpio.h>, so those SoCs that enable + * OF_CONTROL must have arch/gpio.h even if GPIO is not supported. + */ diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index c69d064..438f128 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -17,6 +17,14 @@ struct arch_global_data { #if defined(CONFIG_FSL_ESDHC) u32 sdhc_clk; #endif + +#if defined(CONFIG_U_QE) + u32 qe_clk; + u32 brg_clk; + uint mp_alloc_base; + uint mp_alloc_top; +#endif /* CONFIG_U_QE */ + #ifdef CONFIG_AT91FAMILY /* "static data" needed by at91's clock.c */ unsigned long cpu_clk_rate_hz; diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 1838234..323952f 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -540,6 +540,7 @@ extern struct prcm_regs const omap5_es2_prcm; extern struct prcm_regs const omap4_prcm; extern struct prcm_regs const dra7xx_prcm; extern struct dplls const **dplls_data; +extern struct dplls dra7xx_dplls; extern struct vcores_data const **omap_vcores; extern const u32 sys_clk_array[8]; extern struct omap_sys_ctrl_regs const **ctrl; @@ -547,6 +548,8 @@ extern struct omap_sys_ctrl_regs const omap4_ctrl; extern struct omap_sys_ctrl_regs const omap5_ctrl; extern struct omap_sys_ctrl_regs const dra7xx_ctrl; +extern struct pmic_data tps659038; + void hw_data_init(void); const struct dpll_params *get_mpu_dpll_params(struct dplls const *); |