diff options
Diffstat (limited to 'arch/arm/include/asm')
| -rw-r--r-- | arch/arm/include/asm/arch-rmobile/r8a7794-gpio.h | 114 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-uniphier/arm-mpcore.h | 46 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-uniphier/bcu-regs.h | 30 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-uniphier/board.h | 42 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-uniphier/boot-device.h | 20 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-uniphier/ddrphy-regs.h | 172 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-uniphier/debug-uart.S | 24 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-uniphier/ehci-uniphier.h | 33 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-uniphier/led.h | 101 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-uniphier/mio-regs.h | 20 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-uniphier/platdevice.h | 26 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-uniphier/sbc-regs.h | 109 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-uniphier/sc-regs.h | 62 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-uniphier/sg-regs.h | 238 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-uniphier/ssc-regs.h | 67 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-uniphier/umc-regs.h | 119 |
16 files changed, 107 insertions, 1116 deletions
diff --git a/arch/arm/include/asm/arch-rmobile/r8a7794-gpio.h b/arch/arm/include/asm/arch-rmobile/r8a7794-gpio.h index a45a67c..8a002a8 100644 --- a/arch/arm/include/asm/arch-rmobile/r8a7794-gpio.h +++ b/arch/arm/include/asm/arch-rmobile/r8a7794-gpio.h @@ -74,8 +74,23 @@ enum { GPIO_FN_SD1_CLK, GPIO_FN_SD1_CMD, GPIO_FN_SD1_DATA0, GPIO_FN_SD1_DATA1, GPIO_FN_SD1_DATA2, GPIO_FN_SD1_DATA3, + /* IPSR0 */ + GPIO_FN_SD1_CD, GPIO_FN_CAN0_RX, GPIO_FN_SD1_WP, GPIO_FN_IRQ7, + GPIO_FN_CAN0_TX, GPIO_FN_MMC_CLK, GPIO_FN_SD2_CLK, GPIO_FN_MMC_CMD, + GPIO_FN_SD2_CMD, GPIO_FN_MMC_D0, GPIO_FN_SD2_DATA0, GPIO_FN_MMC_D1, + GPIO_FN_SD2_DATA1, GPIO_FN_MMC_D2, GPIO_FN_SD2_DATA2, + GPIO_FN_MMC_D3, GPIO_FN_SD2_DATA3, GPIO_FN_MMC_D4, + GPIO_FN_SD2_CD, GPIO_FN_MMC_D5, GPIO_FN_SD2_WP, GPIO_FN_MMC_D6, + GPIO_FN_SCIF0_RXD, GPIO_FN_I2C2_SCL_B, GPIO_FN_CAN1_RX, GPIO_FN_MMC_D7, + GPIO_FN_SCIF0_TXD, GPIO_FN_I2C2_SDA_B, GPIO_FN_CAN1_TX, GPIO_FN_D0, + GPIO_FN_SCIFA3_SCK_B, GPIO_FN_IRQ4, GPIO_FN_D1, GPIO_FN_SCIFA3_RXD_B, + GPIO_FN_D2, GPIO_FN_SCIFA3_TXD_B, GPIO_FN_D3, GPIO_FN_I2C3_SCL_B, + GPIO_FN_SCIF5_RXD_B, GPIO_FN_D4, GPIO_FN_I2C3_SDA_B, + GPIO_FN_SCIF5_TXD_B, GPIO_FN_D5, GPIO_FN_SCIF4_RXD_B, + GPIO_FN_I2C0_SCL_D, + /* - * From IPSR0 to IPSR5 have been removed because they does not use. + * From IPSR1 to IPSR5 have been removed because they does not use. */ /* IPSR6 */ @@ -144,9 +159,54 @@ enum { GPIO_FN_SCIF5_RXD, GPIO_FN_I2C2_SCL_C, GPIO_FN_DU1_DR2, GPIO_FN_RIF1_D0_B, GPIO_FN_TS_SDEN_D, GPIO_FN_FMCLK_C, GPIO_FN_RDS_CLK, - /* - * From IPSR9 to IPSR10 have been removed because they does not use. - */ + /* IPSR9 */ + GPIO_FN_MSIOF0_TXD, GPIO_FN_SCIF5_TXD, GPIO_FN_I2C2_SDA_C, + GPIO_FN_DU1_DR3, GPIO_FN_RIF1_D1_B, GPIO_FN_TS_SPSYNC_D, GPIO_FN_FMIN_C, + GPIO_FN_RDS_DATA, GPIO_FN_MSIOF0_SCK, GPIO_FN_IRQ0, GPIO_FN_TS_SDATA, + GPIO_FN_DU1_DR4, GPIO_FN_RIF1_SYNC, GPIO_FN_TPUTO1_C, + GPIO_FN_MSIOF0_SYNC, GPIO_FN_PWM1, GPIO_FN_TS_SCK, GPIO_FN_DU1_DR5, + GPIO_FN_RIF1_CLK, GPIO_FN_BPFCLK_B, GPIO_FN_MSIOF0_SS1, + GPIO_FN_SCIFA0_RXD, GPIO_FN_TS_SDEN, GPIO_FN_DU1_DR6, GPIO_FN_RIF1_D0, + GPIO_FN_FMCLK_B, GPIO_FN_RDS_CLK_B, GPIO_FN_MSIOF0_SS2, + GPIO_FN_SCIFA0_TXD, GPIO_FN_TS_SPSYNC, GPIO_FN_DU1_DR7, GPIO_FN_RIF1_D1, + GPIO_FN_FMIN_B, GPIO_FN_RDS_DATA_B, GPIO_FN_HSCIF1_HRX, + GPIO_FN_I2C4_SCL, GPIO_FN_PWM6, GPIO_FN_DU1_DG0, GPIO_FN_HSCIF1_HTX, + GPIO_FN_I2C4_SDA, GPIO_FN_TPUTO1, GPIO_FN_DU1_DG1, GPIO_FN_HSCIF1_HSCK, + GPIO_FN_PWM2, GPIO_FN_IETX, GPIO_FN_DU1_DG2, GPIO_FN_REMOCON_B, + GPIO_FN_SPEEDIN_B, GPIO_FN_VSP_B, GPIO_FN_HSCIF1_HCTS_N, + GPIO_FN_SCIFA4_RXD, GPIO_FN_IECLK, GPIO_FN_DU1_DG3, GPIO_FN_SSI_SCK1_B, + GPIO_FN_CAN_DEBUG_HW_TRIGGER, GPIO_FN_CC50_STATE32, + GPIO_FN_HSCIF1_HRTS_N, GPIO_FN_SCIFA4_TXD, GPIO_FN_IERX, + GPIO_FN_DU1_DG4, GPIO_FN_SSI_WS1_B, GPIO_FN_CAN_STEP0, + GPIO_FN_CC50_STATE33, GPIO_FN_SCIF1_SCK, GPIO_FN_PWM3, GPIO_FN_TCLK2, + GPIO_FN_DU1_DG5, GPIO_FN_SSI_SDATA1_B, GPIO_FN_CAN_TXCLK, + GPIO_FN_CC50_STATE34, + + /* IPSR10 */ + GPIO_FN_SCIF1_RXD, GPIO_FN_IIC0_SCL, GPIO_FN_DU1_DG6, + GPIO_FN_SSI_SCK2_B, GPIO_FN_CAN_DEBUGOUT0, GPIO_FN_CC50_STATE35, + GPIO_FN_SCIF1_TXD, GPIO_FN_IIC0_SDA, GPIO_FN_DU1_DG7, GPIO_FN_SSI_WS2_B, + GPIO_FN_CAN_DEBUGOUT1, GPIO_FN_CC50_STATE36, GPIO_FN_SCIF2_RXD, + GPIO_FN_IIC1_SCL, GPIO_FN_DU1_DB0, GPIO_FN_SSI_SDATA2_B, + GPIO_FN_USB0_EXTLP, GPIO_FN_CAN_DEBUGOUT2, GPIO_FN_CC50_STATE37, + GPIO_FN_SCIF2_TXD, GPIO_FN_IIC1_SDA, GPIO_FN_DU1_DB1, + GPIO_FN_SSI_SCK9_B, GPIO_FN_USB0_OVC1, GPIO_FN_CAN_DEBUGOUT3, + GPIO_FN_CC50_STATE38, GPIO_FN_SCIF2_SCK, GPIO_FN_IRQ1, GPIO_FN_DU1_DB2, + GPIO_FN_SSI_WS9_B, GPIO_FN_USB0_IDIN, GPIO_FN_CAN_DEBUGOUT4, + GPIO_FN_CC50_STATE39, GPIO_FN_SCIF3_SCK, GPIO_FN_IRQ2, GPIO_FN_BPFCLK_D, + GPIO_FN_DU1_DB3, GPIO_FN_SSI_SDATA9_B, GPIO_FN_TANS2, + GPIO_FN_CAN_DEBUGOUT5, GPIO_FN_CC50_OSCOUT, GPIO_FN_SCIF3_RXD, + GPIO_FN_I2C1_SCL_E, GPIO_FN_FMCLK_D, GPIO_FN_DU1_DB4, + GPIO_FN_AUDIO_CLKA_C, GPIO_FN_SSI_SCK4_B, GPIO_FN_CAN_DEBUGOUT6, + GPIO_FN_RDS_CLK_C, GPIO_FN_SCIF3_TXD, GPIO_FN_I2C1_SDA_E, + GPIO_FN_FMIN_D, GPIO_FN_DU1_DB5, GPIO_FN_AUDIO_CLKB_C, + GPIO_FN_SSI_WS4_B, GPIO_FN_CAN_DEBUGOUT7, GPIO_FN_RDS_DATA_C, + GPIO_FN_I2C2_SCL, GPIO_FN_SCIFA5_RXD, GPIO_FN_DU1_DB6, + GPIO_FN_AUDIO_CLKC_C, GPIO_FN_SSI_SDATA4_B, GPIO_FN_CAN_DEBUGOUT8, + GPIO_FN_I2C2_SDA, GPIO_FN_SCIFA5_TXD, GPIO_FN_DU1_DB7, + GPIO_FN_AUDIO_CLKOUT_C, GPIO_FN_CAN_DEBUGOUT9, GPIO_FN_SSI_SCK5, + GPIO_FN_SCIFA3_SCK, GPIO_FN_CAN_DEBUGOUT10, + GPIO_FN_DU1_DOTCLKIN, /* IPSR11 */ GPIO_FN_SSI_WS5, GPIO_FN_SCIFA3_RXD, GPIO_FN_I2C3_SCL_C, @@ -168,9 +228,49 @@ enum { GPIO_FN_AD_DO_B, GPIO_FN_SSI_SDATA0, GPIO_FN_MSIOF1_SCK_B, GPIO_FN_PWM0_B, GPIO_FN_ADICLK_B, GPIO_FN_AD_CLK_B, - /* - * From IPSR12 to IPSR13 have been removed because they does not use. - */ + /* IPSR12 */ + GPIO_FN_SSI_SCK34, GPIO_FN_MSIOF1_SYNC_B, GPIO_FN_SCIFA1_SCK_C, + GPIO_FN_ADICHS0_B, GPIO_FN_AD_NCS_N_B, GPIO_FN_DREQ1_N_B, + GPIO_FN_SSI_WS34, GPIO_FN_MSIOF1_SS1_B, GPIO_FN_SCIFA1_RXD_C, + GPIO_FN_ADICHS1_B, GPIO_FN_CAN1_RX_C, GPIO_FN_DACK1_B, + GPIO_FN_SSI_SDATA3, GPIO_FN_MSIOF1_SS2_B, GPIO_FN_SCIFA1_TXD_C, + GPIO_FN_ADICHS2_B, GPIO_FN_CAN1_TX_C, GPIO_FN_DREQ2_N, GPIO_FN_SSI_SCK4, + GPIO_FN_MLB_CK, GPIO_FN_IETX_B, GPIO_FN_IRD_TX, GPIO_FN_SSI_WS4, + GPIO_FN_MLB_SIG, GPIO_FN_IECLK_B, GPIO_FN_IRD_RX, GPIO_FN_SSI_SDATA4, + GPIO_FN_MLB_DAT, GPIO_FN_IERX_B, GPIO_FN_IRD_SCK, GPIO_FN_SSI_SDATA8, + GPIO_FN_SCIF1_SCK_B, GPIO_FN_PWM1_B, GPIO_FN_IRQ9, GPIO_FN_REMOCON, + GPIO_FN_DACK2, GPIO_FN_ETH_MDIO_B, GPIO_FN_SSI_SCK1, + GPIO_FN_SCIF1_RXD_B, GPIO_FN_IIC1_SCL_C, GPIO_FN_VI1_CLK, + GPIO_FN_CAN0_RX_D, GPIO_FN_AVB_AVTP_CAPTURE, GPIO_FN_ETH_CRS_DV_B, + GPIO_FN_SSI_WS1, GPIO_FN_SCIF1_TXD_B, GPIO_FN_IIC1_SDA_C, + GPIO_FN_VI1_DATA0, GPIO_FN_CAN0_TX_D, GPIO_FN_AVB_AVTP_MATCH, + GPIO_FN_ETH_RX_ER_B, GPIO_FN_SSI_SDATA1, GPIO_FN_HSCIF1_HRX_B, + GPIO_FN_VI1_DATA1, GPIO_FN_SDATA, GPIO_FN_ATAG0_N, GPIO_FN_ETH_RXD0_B, + GPIO_FN_SSI_SCK2, GPIO_FN_HSCIF1_HTX_B, GPIO_FN_VI1_DATA2, + GPIO_FN_MDATA, GPIO_FN_ATAWR0_N, GPIO_FN_ETH_RXD1_B, + + /* IPSR13 */ + GPIO_FN_SSI_WS2, GPIO_FN_HSCIF1_HCTS_N_B, GPIO_FN_SCIFA0_RXD_D, + GPIO_FN_VI1_DATA3, GPIO_FN_SCKZ, GPIO_FN_ATACS00_N, GPIO_FN_ETH_LINK_B, + GPIO_FN_SSI_SDATA2, GPIO_FN_HSCIF1_HRTS_N_B, GPIO_FN_SCIFA0_TXD_D, + GPIO_FN_VI1_DATA4, GPIO_FN_STM_N, GPIO_FN_ATACS10_N, + GPIO_FN_ETH_REFCLK_B, GPIO_FN_SSI_SCK9, GPIO_FN_SCIF2_SCK_B, + GPIO_FN_PWM2_B, GPIO_FN_VI1_DATA5, GPIO_FN_MTS_N, GPIO_FN_EX_WAIT1, + GPIO_FN_ETH_TXD1_B, GPIO_FN_SSI_WS9, GPIO_FN_SCIF2_RXD_B, + GPIO_FN_I2C3_SCL_E, GPIO_FN_VI1_DATA6, GPIO_FN_ATARD0_N, + GPIO_FN_ETH_TX_EN_B, GPIO_FN_SSI_SDATA9, GPIO_FN_SCIF2_TXD_B, + GPIO_FN_I2C3_SDA_E, GPIO_FN_VI1_DATA7, GPIO_FN_ATADIR0_N, + GPIO_FN_ETH_MAGIC_B, GPIO_FN_AUDIO_CLKA, GPIO_FN_I2C0_SCL_B, + GPIO_FN_SCIFA4_RXD_D, GPIO_FN_VI1_CLKENB, GPIO_FN_TS_SDATA_C, + GPIO_FN_RIF0_SYNC_B, GPIO_FN_ETH_TXD0_B, GPIO_FN_AUDIO_CLKB, + GPIO_FN_I2C0_SDA_B, GPIO_FN_SCIFA4_TXD_D, GPIO_FN_VI1_FIELD, + GPIO_FN_TS_SCK_C, GPIO_FN_RIF0_CLK_B, GPIO_FN_BPFCLK_E, + GPIO_FN_ETH_MDC_B, GPIO_FN_AUDIO_CLKC, GPIO_FN_I2C4_SCL_B, + GPIO_FN_SCIFA5_RXD_D, GPIO_FN_VI1_HSYNC_N, GPIO_FN_TS_SDEN_C, + GPIO_FN_RIF0_D0_B, GPIO_FN_FMCLK_E, GPIO_FN_RDS_CLK_D, + GPIO_FN_AUDIO_CLKOUT, GPIO_FN_I2C4_SDA_B, GPIO_FN_SCIFA5_TXD_D, + GPIO_FN_VI1_VSYNC_N, GPIO_FN_TS_SPSYNC_C, GPIO_FN_RIF0_D1_B, + GPIO_FN_FMIN_E, GPIO_FN_RDS_DATA_D, }; #endif /* __ASM_R8A7794_H__ */ diff --git a/arch/arm/include/asm/arch-uniphier/arm-mpcore.h b/arch/arm/include/asm/arch-uniphier/arm-mpcore.h deleted file mode 100644 index cf7cd46..0000000 --- a/arch/arm/include/asm/arch-uniphier/arm-mpcore.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_ARM_MPCORE_H -#define ARCH_ARM_MPCORE_H - -/* Snoop Control Unit */ -#define SCU_OFFSET 0x00 - -/* SCU Control Register */ -#define SCU_CTRL 0x00 -/* SCU Configuration Register */ -#define SCU_CONF 0x04 -/* SCU CPU Power Status Register */ -#define SCU_PWR_STATUS 0x08 -/* SCU Invalidate All Registers in Secure State */ -#define SCU_INV_ALL 0x0C -/* SCU Filtering Start Address Register */ -#define SCU_FILTER_START 0x40 -/* SCU Filtering End Address Register */ -#define SCU_FILTER_END 0x44 -/* SCU Access Control Register */ -#define SCU_SAC 0x50 -/* SCU Non-secure Access Control Register */ -#define SCU_SNSAC 0x54 - -/* Global Timer */ -#define GLOBAL_TIMER_OFFSET 0x200 - -/* Global Timer Counter Registers */ -#define GTIMER_CNT_L 0x00 -#define GTIMER_CNT_H 0x04 -/* Global Timer Control Register */ -#define GTIMER_CTRL 0x08 -/* Global Timer Interrupt Status Register */ -#define GTIMER_STAT 0x0C -/* Comparator Value Registers */ -#define GTIMER_CMP_L 0x10 -#define GTIMER_CMP_H 0x14 -/* Auto-increment Register */ -#define GTIMER_INC 0x18 - -#endif /* ARCH_ARM_MPCORE_H */ diff --git a/arch/arm/include/asm/arch-uniphier/bcu-regs.h b/arch/arm/include/asm/arch-uniphier/bcu-regs.h deleted file mode 100644 index 0dfd94e..0000000 --- a/arch/arm/include/asm/arch-uniphier/bcu-regs.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * UniPhier BCU (Bus Control Unit) registers - * - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_BCU_REGS_H -#define ARCH_BCU_REGS_H - -#define BCU_BASE 0x50080000 - -#define BCSCR(x) (BCU_BASE + 0x180 + (x) * 4) -#define BCSCR0 (BCSCR(0)) -#define BCSCR1 (BCSCR(1)) -#define BCSCR2 (BCSCR(2)) -#define BCSCR3 (BCSCR(3)) -#define BCSCR4 (BCSCR(4)) -#define BCSCR5 (BCSCR(5)) - -#define BCIPPCCHR(x) (BCU_BASE + 0x0280 + (x) * 4) -#define BCIPPCCHR0 (BCIPPCCHR(0)) -#define BCIPPCCHR1 (BCIPPCCHR(1)) -#define BCIPPCCHR2 (BCIPPCCHR(2)) -#define BCIPPCCHR3 (BCIPPCCHR(3)) -#define BCIPPCCHR4 (BCIPPCCHR(4)) -#define BCIPPCCHR5 (BCIPPCCHR(5)) - -#endif /* ARCH_BCU_REGS_H */ diff --git a/arch/arm/include/asm/arch-uniphier/board.h b/arch/arm/include/asm/arch-uniphier/board.h deleted file mode 100644 index e3cba5b..0000000 --- a/arch/arm/include/asm/arch-uniphier/board.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_BOARD_H -#define ARCH_BOARD_H - -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) || \ - defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -void support_card_reset(void); -void support_card_init(void); -void support_card_late_init(void); -int check_support_card(void); -#else -#define support_card_reset() do {} while (0) -#define support_card_init() do {} while (0) -#define support_card_late_init() do {} while (0) -static inline int check_support_card(void) -{ - return 0; -} -#endif - -static inline void uniphier_board_reset(void) -{ - support_card_reset(); -} - -static inline void uniphier_board_init(void) -{ - support_card_init(); -} - -static inline void uniphier_board_late_init(void) -{ - support_card_late_init(); -} - -#endif /* ARCH_BOARD_H */ diff --git a/arch/arm/include/asm/arch-uniphier/boot-device.h b/arch/arm/include/asm/arch-uniphier/boot-device.h deleted file mode 100644 index 7a10f1c..0000000 --- a/arch/arm/include/asm/arch-uniphier/boot-device.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _ASM_BOOT_DEVICE_H_ -#define _ASM_BOOT_DEVICE_H_ - -int get_boot_mode_sel(void); - -struct boot_device_info { - u32 type; - char *info; -}; - -extern struct boot_device_info boot_device_table[]; - -#endif /* _ASM_BOOT_DEVICE_H_ */ diff --git a/arch/arm/include/asm/arch-uniphier/ddrphy-regs.h b/arch/arm/include/asm/arch-uniphier/ddrphy-regs.h deleted file mode 100644 index 6b7d600..0000000 --- a/arch/arm/include/asm/arch-uniphier/ddrphy-regs.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * UniPhier DDR PHY registers - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_DDRPHY_REGS_H -#define ARCH_DDRPHY_REGS_H - -#include <linux/compiler.h> - -#ifndef __ASSEMBLY__ - -struct ddrphy { - u32 ridr; /* Revision Identification Register */ - u32 pir; /* PHY Initialixation Register */ - u32 pgcr[2]; /* PHY General Configuration Register */ - u32 pgsr[2]; /* PHY General Status Register */ - u32 pllcr; /* PLL Control Register */ - u32 ptr[5]; /* PHY Timing Register */ - u32 acmdlr; /* AC Master Delay Line Register */ - u32 acbdlr; /* AC Bit Delay Line Register */ - u32 aciocr; /* AC I/O Configuration Register */ - u32 dxccr; /* DATX8 Common Configuration Register */ - u32 dsgcr; /* DDR System General Configuration Register */ - u32 dcr; /* DRAM Configuration Register */ - u32 dtpr[3]; /* DRAM Timing Parameters Register */ - u32 mr0; /* Mode Register 0 */ - u32 mr1; /* Mode Register 1 */ - u32 mr2; /* Mode Register 2 */ - u32 mr3; /* Mode Register 3 */ - u32 odtcr; /* ODT Configuration Register */ - u32 dtcr; /* Data Training Configuration Register */ - u32 dtar[4]; /* Data Training Address Register */ - u32 dtdr[2]; /* Data Training Data Register */ - u32 dtedr[2]; /* Data Training Eye Data Register */ - u32 rsv0[13]; /* Reserved */ - u32 dcuar; /* DCU Address Register */ - u32 dcudr; /* DCU Data Register */ - u32 dcurr; /* DCU Run Register */ - u32 dculr; /* DCU Loop Register */ - u32 dcugcr; /* DCU General Configuration Register */ - u32 dcutpr; /* DCU Timing Parameters Register */ - u32 dcusr[2]; /* DCU Status Register */ - u32 rsv1[8]; /* Reserved */ - u32 bistrr; /* BIST Run Register */ - u32 bistwcr; /* BIST Word Count Register */ - u32 bistmskr[3]; /* BIST Mask Register */ - u32 bistlsr; /* BIST LFSR Sed Register */ - u32 bistar[3]; /* BIST Address Register */ - u32 bistudpr; /* BIST User Data Pattern Register */ - u32 bistgsr; /* BIST General Status Register */ - u32 bistwer; /* BIST Word Error Register */ - u32 bistber[4]; /* BIST Bit Error Register */ - u32 bistwcsr; /* BIST Word Count Status Register */ - u32 bistfwr[3]; /* BIST Fail Word Register */ - u32 rsv2[10]; /* Reserved */ - u32 gpr[2]; /* General Purpose Register */ - struct ddrphy_zq { /* ZQ */ - u32 cr[2]; /* Impedance Control Register */ - u32 sr[2]; /* Impedance Status Register */ - } zq[4]; - struct ddrphy_datx8 { /* DATX8 */ - u32 gcr; /* General Configuration Register */ - u32 gsr[2]; /* General Status Register */ - u32 bdlr[5]; /* Bit Delay Line Register */ - u32 lcdlr[3]; /* Local Calibrated Delay Line Register */ - u32 mdlr; /* Master Delay Line Register */ - u32 gtr; /* General Timing Register */ - u32 rsv[3]; /* Reserved */ - } dx[9]; -}; - -#endif /* __ASSEMBLY__ */ - -#define PIR_INIT (1 << 0) /* Initialization Trigger */ -#define PIR_ZCAL (1 << 1) /* Impedance Calibration */ -#define PIR_PLLINIT (1 << 4) /* PLL Initialization */ -#define PIR_DCAL (1 << 5) /* DDL Calibration */ -#define PIR_PHYRST (1 << 6) /* PHY Reset */ -#define PIR_DRAMRST (1 << 7) /* DRAM Reset */ -#define PIR_DRAMINIT (1 << 8) /* DRAM Initialization */ -#define PIR_WL (1 << 9) /* Write Leveling */ -#define PIR_QSGATE (1 << 10) /* Read DQS Gate Training */ -#define PIR_WLADJ (1 << 11) /* Write Leveling Adjust */ -#define PIR_RDDSKW (1 << 12) /* Read Data Bit Deskew */ -#define PIR_WRDSKW (1 << 13) /* Write Data Bit Deskew */ -#define PIR_RDEYE (1 << 14) /* Read Data Eye Training */ -#define PIR_WREYE (1 << 15) /* Write Data Eye Training */ -#define PIR_LOCKBYP (1 << 28) /* PLL Lock Bypass */ -#define PIR_DCALBYP (1 << 29) /* DDL Calibration Bypass */ -#define PIR_ZCALBYP (1 << 30) /* Impedance Calib Bypass */ -#define PIR_INITBYP (1 << 31) /* Initialization Bypass */ - -#define PGSR0_IDONE (1 << 0) /* Initialization Done */ -#define PGSR0_PLDONE (1 << 1) /* PLL Lock Done */ -#define PGSR0_DCDONE (1 << 2) /* DDL Calibration Done */ -#define PGSR0_ZCDONE (1 << 3) /* Impedance Calibration Done */ -#define PGSR0_DIDONE (1 << 4) /* DRAM Initialization Done */ -#define PGSR0_WLDONE (1 << 5) /* Write Leveling Done */ -#define PGSR0_QSGDONE (1 << 6) /* DQS Gate Training Done */ -#define PGSR0_WLADONE (1 << 7) /* Write Leveling Adjust Done */ -#define PGSR0_RDDONE (1 << 8) /* Read Bit Deskew Done */ -#define PGSR0_WDDONE (1 << 9) /* Write Bit Deskew Done */ -#define PGSR0_REDONE (1 << 10) /* Read Eye Training Done */ -#define PGSR0_WEDONE (1 << 11) /* Write Eye Training Done */ -#define PGSR0_IERR (1 << 16) /* Initialization Error */ -#define PGSR0_PLERR (1 << 17) /* PLL Lock Error */ -#define PGSR0_DCERR (1 << 18) /* DDL Calibration Error */ -#define PGSR0_ZCERR (1 << 19) /* Impedance Calib Error */ -#define PGSR0_DIERR (1 << 20) /* DRAM Initialization Error */ -#define PGSR0_WLERR (1 << 21) /* Write Leveling Error */ -#define PGSR0_QSGERR (1 << 22) /* DQS Gate Training Error */ -#define PGSR0_WLAERR (1 << 23) /* Write Leveling Adj Error */ -#define PGSR0_RDERR (1 << 24) /* Read Bit Deskew Error */ -#define PGSR0_WDERR (1 << 25) /* Write Bit Deskew Error */ -#define PGSR0_REERR (1 << 26) /* Read Eye Training Error */ -#define PGSR0_WEERR (1 << 27) /* Write Eye Training Error */ -#define PGSR0_DTERR_SHIFT 28 /* Data Training Error Status*/ -#define PGSR0_DTERR (7 << (PGSR0_DTERR_SHIFT)) -#define PGSR0_APLOCK (1 << 31) /* AC PLL Lock */ - -#define DXCCR_DQSRES_OPEN (0 << 5) -#define DXCCR_DQSRES_688_OHM (1 << 5) -#define DXCCR_DQSRES_611_OHM (2 << 5) -#define DXCCR_DQSRES_550_OHM (3 << 5) -#define DXCCR_DQSRES_500_OHM (4 << 5) -#define DXCCR_DQSRES_458_OHM (5 << 5) -#define DXCCR_DQSRES_393_OHM (6 << 5) -#define DXCCR_DQSRES_344_OHM (7 << 5) - -#define DXCCR_DQSNRES_OPEN (0 << 9) -#define DXCCR_DQSNRES_688_OHM (1 << 9) -#define DXCCR_DQSNRES_611_OHM (2 << 9) -#define DXCCR_DQSNRES_550_OHM (3 << 9) -#define DXCCR_DQSNRES_500_OHM (4 << 9) -#define DXCCR_DQSNRES_458_OHM (5 << 9) -#define DXCCR_DQSNRES_393_OHM (6 << 9) -#define DXCCR_DQSNRES_344_OHM (7 << 9) - -#define DTCR_DTRANK_SHIFT 4 /* Data Training Rank */ -#define DTCR_DTRANK_MASK (0x3 << (DTCR_DTRANK_SHIFT)) -#define DTCR_DTMPR (1 << 6) /* Data Training using MPR */ -#define DTCR_RNKEN_SHIFT 24 /* Rank Enable */ -#define DTCR_RNKEN_MASK (0xf << (DTCR_RNKEN_SHIFT)) - -#define DXGCR_WLRKEN_SHIFT 26 /* Write Level Rank Enable */ -#define DXGCR_WLRKEN_MASK (0xf << (DXGCR_WLRKEN_SHIFT)) - -/* SoC-specific parameters */ -#define NR_DATX8_PER_DDRPHY 2 - -#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) -#define NR_DDRPHY_PER_CH 1 -#else -#define NR_DDRPHY_PER_CH 2 -#endif - -#define NR_DDRCH 2 - -#define DDRPHY_BASE(ch, phy) (0x5bc01000 + 0x200000 * (ch) + 0x1000 * (phy)) - -#ifndef __ASSEMBLY__ -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size); -void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank); -int ddrphy_training(struct ddrphy __iomem *phy); -#endif - -#endif /* ARCH_DDRPHY_REGS_H */ diff --git a/arch/arm/include/asm/arch-uniphier/debug-uart.S b/arch/arm/include/asm/arch-uniphier/debug-uart.S deleted file mode 100644 index af55fee..0000000 --- a/arch/arm/include/asm/arch-uniphier/debug-uart.S +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/serial_reg.h> - -#if !defined(CONFIG_DEBUG_SEMIHOSTING) -#include CONFIG_DEBUG_LL_INCLUDE -#endif - -#define BAUDRATE 115200 -#define DIV_ROUND(x, d) (((x) + ((d) / 2)) / (d)) -#define DIVISOR DIV_ROUND(UART_CLK, 16 * BAUDRATE) - - .macro init_debug_uart, ra, rb, rc - addruart \ra, \rb, \rc - mov \rb, #UART_LCR_WLEN8 - strb \rb, [\ra, #0x11] - ldr \rb, =DIVISOR - str \rb, [\ra, #0x24] - .endm diff --git a/arch/arm/include/asm/arch-uniphier/ehci-uniphier.h b/arch/arm/include/asm/arch-uniphier/ehci-uniphier.h deleted file mode 100644 index e9c5fb4..0000000 --- a/arch/arm/include/asm/arch-uniphier/ehci-uniphier.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __PLAT_UNIPHIER_EHCI_H -#define __PLAT_UNIPHIER_EHCI_H - -#include <linux/types.h> -#include <asm/io.h> -#include "mio-regs.h" - -struct uniphier_ehci_platform_data { - unsigned long base; -}; - -extern struct uniphier_ehci_platform_data uniphier_ehci_platdata[]; - -static inline void uniphier_ehci_reset(int index, int on) -{ - u32 tmp; - - tmp = readl(MIO_USB_RSTCTRL(index)); - if (on) - tmp &= ~MIO_USB_RSTCTRL_XRST; - else - tmp |= MIO_USB_RSTCTRL_XRST; - writel(tmp, MIO_USB_RSTCTRL(index)); -} - -#endif /* __PLAT_UNIPHIER_EHCI_H */ diff --git a/arch/arm/include/asm/arch-uniphier/led.h b/arch/arm/include/asm/arch-uniphier/led.h deleted file mode 100644 index 21277da..0000000 --- a/arch/arm/include/asm/arch-uniphier/led.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_LED_H -#define ARCH_LED_H - -#include <config.h> - -#define LED_CHAR_0 0x7e -#define LED_CHAR_1 0x0c -#define LED_CHAR_2 0xb6 -#define LED_CHAR_3 0x9e -#define LED_CHAR_4 0xcc -#define LED_CHAR_5 0xda -#define LED_CHAR_6 0xfa -#define LED_CHAR_7 0x4e -#define LED_CHAR_8 0xfe -#define LED_CHAR_9 0xde - -#define LED_CHAR_A 0xee -#define LED_CHAR_B 0xf8 -#define LED_CHAR_C 0x72 -#define LED_CHAR_D 0xbc -#define LED_CHAR_E 0xf2 -#define LED_CHAR_F 0xe2 -#define LED_CHAR_G 0x7a -#define LED_CHAR_H 0xe8 -#define LED_CHAR_I 0x08 -#define LED_CHAR_J 0x3c -#define LED_CHAR_K 0xea -#define LED_CHAR_L 0x70 -#define LED_CHAR_M 0x6e -#define LED_CHAR_N 0xa8 -#define LED_CHAR_O 0xb8 -#define LED_CHAR_P 0xe6 -#define LED_CHAR_Q 0xce -#define LED_CHAR_R 0xa0 -#define LED_CHAR_S 0xc8 -#define LED_CHAR_T 0x8c -#define LED_CHAR_U 0x7c -#define LED_CHAR_V 0x54 -#define LED_CHAR_W 0xfc -#define LED_CHAR_X 0xec -#define LED_CHAR_Y 0xdc -#define LED_CHAR_Z 0xa4 - -#define LED_CHAR_SPACE 0x00 -#define LED_CHAR_DOT 0x01 - -#define LED_CHAR_ (LED_CHAR_SPACE) - -/** Macro to translate 4 characters into integer to display led */ -#define LED_C2I(C0, C1, C2, C3) \ - (~( \ - (LED_CHAR_##C0 << 24) | \ - (LED_CHAR_##C1 << 16) | \ - (LED_CHAR_##C2 << 8) | \ - (LED_CHAR_##C3) \ - )) - -#if defined(CONFIG_SUPPORT_CARD_LED_BASE) - -#define LED_ADDR CONFIG_SUPPORT_CARD_LED_BASE - -#ifdef __ASSEMBLY__ - -#define led_write(C0, C1, C2, C3) raw_led_write LED_C2I(C0, C1, C2, C3) -.macro raw_led_write data - ldr r0, =\data - ldr r1, =LED_ADDR - str r0, [r1] -.endm - -#else /* __ASSEMBLY__ */ - -#include <asm/io.h> - -#define led_write(C0, C1, C2, C3) \ -do { \ - raw_led_write(LED_C2I(C0, C1, C2, C3)); \ -} while (0) - -static inline void raw_led_write(u32 data) -{ - writel(data, LED_ADDR); -} - -#endif /* __ASSEMBLY__ */ - -#else /* CONFIG_SUPPORT_CARD_LED_BASE */ - -#define led_write(C0, C1, C2, C3) -#define raw_led_write(x) - -#endif /* CONFIG_SUPPORT_CARD_LED_BASE */ - -#endif /* ARCH_LED_H */ diff --git a/arch/arm/include/asm/arch-uniphier/mio-regs.h b/arch/arm/include/asm/arch-uniphier/mio-regs.h deleted file mode 100644 index 3306934..0000000 --- a/arch/arm/include/asm/arch-uniphier/mio-regs.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * UniPhier MIO (Media I/O) registers - * - * Copyright (C) 2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_MIO_REGS_H -#define ARCH_MIO_REGS_H - -#define MIO_BASE 0x59810000 - -#define MIO_CLKCTRL(i) (MIO_BASE + 0x200 * (i) + 0x0020) -#define MIO_RSTCTRL(i) (MIO_BASE + 0x200 * (i) + 0x0110) -#define MIO_USB_RSTCTRL(i) (MIO_BASE + 0x200 * (i) + 0x0114) - -#define MIO_USB_RSTCTRL_XRST (0x1 << 0) - -#endif /* ARCH_MIO_REGS_H */ diff --git a/arch/arm/include/asm/arch-uniphier/platdevice.h b/arch/arm/include/asm/arch-uniphier/platdevice.h deleted file mode 100644 index 62a5126..0000000 --- a/arch/arm/include/asm/arch-uniphier/platdevice.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_PLATDEVICE_H -#define ARCH_PLATDEVICE_H - -#include <dm/platdata.h> -#include <dm/platform_data/serial-uniphier.h> - -#define SERIAL_DEVICE(n, ba, clk) \ -static struct uniphier_serial_platform_data serial_device##n = { \ - .base = ba, \ - .uartclk = clk \ -}; \ -U_BOOT_DEVICE(serial##n) = { \ - .name = DRIVER_NAME, \ - .platdata = &serial_device##n \ -}; - -#include <asm/arch/ehci-uniphier.h> - -#endif /* ARCH_PLATDEVICE_H */ diff --git a/arch/arm/include/asm/arch-uniphier/sbc-regs.h b/arch/arm/include/asm/arch-uniphier/sbc-regs.h deleted file mode 100644 index efb68e8..0000000 --- a/arch/arm/include/asm/arch-uniphier/sbc-regs.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * UniPhier SBC (System Bus Controller) registers - * - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_SBC_REGS_H -#define ARCH_SBC_REGS_H - -#define SBBASE_BASE 0x58c00100 -#define SBBASE(x) (SBBASE_BASE + (x) * 0x10) - -#define SBBASE0 (SBBASE(0)) -#define SBBASE1 (SBBASE(1)) -#define SBBASE2 (SBBASE(2)) -#define SBBASE3 (SBBASE(3)) -#define SBBASE4 (SBBASE(4)) -#define SBBASE5 (SBBASE(5)) -#define SBBASE6 (SBBASE(6)) -#define SBBASE7 (SBBASE(7)) - -#define SBBASE_BANK_ENABLE (0x00000001) - -#define SBCTRL_BASE 0x58c00200 -#define SBCTRL(x, y) (SBCTRL_BASE + (x) * 0x10 + (y) * 4) - -#define SBCTRL00 SBCTRL(0, 0) -#define SBCTRL01 SBCTRL(0, 1) -#define SBCTRL02 SBCTRL(0, 2) -#define SBCTRL03 SBCTRL(0, 3) -#define SBCTRL04 (SBCTRL_BASE + 0x100) - -#define SBCTRL10 SBCTRL(1, 0) -#define SBCTRL11 SBCTRL(1, 1) -#define SBCTRL12 SBCTRL(1, 2) -#define SBCTRL13 SBCTRL(1, 3) -#define SBCTRL14 (SBCTRL_BASE + 0x110) - -#define SBCTRL20 SBCTRL(2, 0) -#define SBCTRL21 SBCTRL(2, 1) -#define SBCTRL22 SBCTRL(2, 2) -#define SBCTRL23 SBCTRL(2, 3) -#define SBCTRL24 (SBCTRL_BASE + 0x120) - -#define SBCTRL30 SBCTRL(3, 0) -#define SBCTRL31 SBCTRL(3, 1) -#define SBCTRL32 SBCTRL(3, 2) -#define SBCTRL33 SBCTRL(3, 3) -#define SBCTRL34 (SBCTRL_BASE + 0x130) - -#define SBCTRL40 SBCTRL(4, 0) -#define SBCTRL41 SBCTRL(4, 1) -#define SBCTRL42 SBCTRL(4, 2) -#define SBCTRL43 SBCTRL(4, 3) -#define SBCTRL44 (SBCTRL_BASE + 0x140) - -#define SBCTRL50 SBCTRL(5, 0) -#define SBCTRL51 SBCTRL(5, 1) -#define SBCTRL52 SBCTRL(5, 2) -#define SBCTRL53 SBCTRL(5, 3) -#define SBCTRL54 (SBCTRL_BASE + 0x150) - -#define SBCTRL60 SBCTRL(6, 0) -#define SBCTRL61 SBCTRL(6, 1) -#define SBCTRL62 SBCTRL(6, 2) -#define SBCTRL63 SBCTRL(6, 3) -#define SBCTRL64 (SBCTRL_BASE + 0x160) - -#define SBCTRL70 SBCTRL(7, 0) -#define SBCTRL71 SBCTRL(7, 1) -#define SBCTRL72 SBCTRL(7, 2) -#define SBCTRL73 SBCTRL(7, 3) -#define SBCTRL74 (SBCTRL_BASE + 0x170) - -/* slower but LED works */ -#define SBCTRL0_SAVEPIN_PERI_VALUE 0x55450000 -#define SBCTRL1_SAVEPIN_PERI_VALUE 0x07168d00 -#define SBCTRL2_SAVEPIN_PERI_VALUE 0x34000009 -#define SBCTRL4_SAVEPIN_PERI_VALUE 0x02110110 - -/* faster but LED does not work */ -#define SBCTRL0_SAVEPIN_MEM_VALUE 0x55450000 -#define SBCTRL1_SAVEPIN_MEM_VALUE 0x06057700 -/* NOR flash needs more wait counts than SRAM */ -#define SBCTRL2_SAVEPIN_MEM_VALUE 0x34000009 -#define SBCTRL4_SAVEPIN_MEM_VALUE 0x02110210 - -#define SBCTRL0_ADMULTIPLX_PERI_VALUE 0x33120000 -#define SBCTRL1_ADMULTIPLX_PERI_VALUE 0x03005500 -#define SBCTRL2_ADMULTIPLX_PERI_VALUE 0x14000020 - -#define SBCTRL0_ADMULTIPLX_MEM_VALUE 0x33120000 -#define SBCTRL1_ADMULTIPLX_MEM_VALUE 0x03005500 -#define SBCTRL2_ADMULTIPLX_MEM_VALUE 0x14000010 - -#define PC0CTRL 0x598000c0 -#define ROM_BOOT_ROMRSV2 0x59801208 - -#ifndef __ASSEMBLY__ -#include <asm/io.h> -static inline int boot_is_swapped(void) -{ - return !(readl(SBBASE0) & SBBASE_BANK_ENABLE); -} -#endif - -#endif /* ARCH_SBC_REGS_H */ diff --git a/arch/arm/include/asm/arch-uniphier/sc-regs.h b/arch/arm/include/asm/arch-uniphier/sc-regs.h deleted file mode 100644 index 1197bb5..0000000 --- a/arch/arm/include/asm/arch-uniphier/sc-regs.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * UniPhier SC (System Control) block registers - * - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_SC_REGS_H -#define ARCH_SC_REGS_H - -#define SC_BASE_ADDR 0x61840000 - -#define SC_MPLLOSCCTL (SC_BASE_ADDR | 0x1184) -#define SC_MPLLOSCCTL_MPLLEN (0x1 << 0) -#define SC_MPLLOSCCTL_MPLLST (0x1 << 1) - -#define SC_DPLLCTRL (SC_BASE_ADDR | 0x1200) -#define SC_DPLLCTRL_SSC_EN (0x1 << 31) -#define SC_DPLLCTRL_FOUTMODE_MASK (0xf << 16) -#define SC_DPLLCTRL_SSC_RATE (0x1 << 15) - -#define SC_DPLLCTRL2 (SC_BASE_ADDR | 0x1204) -#define SC_DPLLCTRL2_NRSTDS (0x1 << 28) - -#define SC_DPLLCTRL3 (SC_BASE_ADDR | 0x1208) -#define SC_DPLLCTRL3_LPFSEL_COEF2 (0x0 << 31) -#define SC_DPLLCTRL3_LPFSEL_COEF3 (0x1 << 31) - -#define SC_UPLLCTRL (SC_BASE_ADDR | 0x1210) - -#define SC_VPLL27ACTRL (SC_BASE_ADDR | 0x1270) -#define SC_VPLL27ACTRL2 (SC_BASE_ADDR | 0x1274) -#define SC_VPLL27ACTRL3 (SC_BASE_ADDR | 0x1278) - -#define SC_VPLL27BCTRL (SC_BASE_ADDR | 0x1290) -#define SC_VPLL27BCTRL2 (SC_BASE_ADDR | 0x1294) -#define SC_VPLL27BCTRL3 (SC_BASE_ADDR | 0x1298) - -#define SC_RSTCTRL (SC_BASE_ADDR | 0x2000) -#define SC_RSTCTRL_NRST_ETHER (0x1 << 12) -#define SC_RSTCTRL_NRST_UMC1 (0x1 << 5) -#define SC_RSTCTRL_NRST_UMC0 (0x1 << 4) -#define SC_RSTCTRL_NRST_NAND (0x1 << 2) - -#define SC_RSTCTRL2 (SC_BASE_ADDR | 0x2004) -#define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008) - -#define SC_CLKCTRL (SC_BASE_ADDR | 0x2104) -#define SC_CLKCTRL_CLK_ETHER (0x1 << 12) -#define SC_CLKCTRL_CLK_MIO (0x1 << 11) -#define SC_CLKCTRL_CLK_UMC (0x1 << 4) -#define SC_CLKCTRL_CLK_NAND (0x1 << 2) -#define SC_CLKCTRL_CLK_SBC (0x1 << 1) -#define SC_CLKCTRL_CLK_PERI (0x1 << 0) - -/* System reset control register */ -#define SC_IRQTIMSET (SC_BASE_ADDR | 0x3000) -#define SC_SLFRSTSEL (SC_BASE_ADDR | 0x3010) -#define SC_SLFRSTCTL (SC_BASE_ADDR | 0x3014) - -#endif /* ARCH_SC_REGS_H */ diff --git a/arch/arm/include/asm/arch-uniphier/sg-regs.h b/arch/arm/include/asm/arch-uniphier/sg-regs.h deleted file mode 100644 index 4ae67c8..0000000 --- a/arch/arm/include/asm/arch-uniphier/sg-regs.h +++ /dev/null @@ -1,238 +0,0 @@ -/* - * UniPhier SG (SoC Glue) block registers - * - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_SG_REGS_H -#define ARCH_SG_REGS_H - -/* Base Address */ -#define SG_CTRL_BASE 0x5f800000 -#define SG_DBG_BASE 0x5f900000 - -/* Revision */ -#define SG_REVISION (SG_CTRL_BASE | 0x0000) -#define SG_REVISION_TYPE_SHIFT 16 -#define SG_REVISION_TYPE_MASK (0xff << SG_REVISION_TYPE_SHIFT) -#define SG_REVISION_MODEL_SHIFT 8 -#define SG_REVISION_MODEL_MASK (0x3 << SG_REVISION_MODEL_SHIFT) -#define SG_REVISION_REV_SHIFT 0 -#define SG_REVISION_REV_MASK (0x1f << SG_REVISION_REV_SHIFT) - -/* Memory Configuration */ -#define SG_MEMCONF (SG_CTRL_BASE | 0x0400) - -#define SG_MEMCONF_CH0_SZ_64M ((0x0 << 10) | (0x01 << 0)) -#define SG_MEMCONF_CH0_SZ_128M ((0x0 << 10) | (0x02 << 0)) -#define SG_MEMCONF_CH0_SZ_256M ((0x0 << 10) | (0x03 << 0)) -#define SG_MEMCONF_CH0_SZ_512M ((0x1 << 10) | (0x00 << 0)) -#define SG_MEMCONF_CH0_SZ_1G ((0x1 << 10) | (0x01 << 0)) -#define SG_MEMCONF_CH0_NUM_1 (0x1 << 8) -#define SG_MEMCONF_CH0_NUM_2 (0x0 << 8) - -#define SG_MEMCONF_CH1_SZ_64M ((0x0 << 11) | (0x01 << 2)) -#define SG_MEMCONF_CH1_SZ_128M ((0x0 << 11) | (0x02 << 2)) -#define SG_MEMCONF_CH1_SZ_256M ((0x0 << 11) | (0x03 << 2)) -#define SG_MEMCONF_CH1_SZ_512M ((0x1 << 11) | (0x00 << 2)) -#define SG_MEMCONF_CH1_SZ_1G ((0x1 << 11) | (0x01 << 2)) -#define SG_MEMCONF_CH1_NUM_1 (0x1 << 9) -#define SG_MEMCONF_CH1_NUM_2 (0x0 << 9) - -#define SG_MEMCONF_CH2_SZ_64M ((0x0 << 26) | (0x01 << 16)) -#define SG_MEMCONF_CH2_SZ_128M ((0x0 << 26) | (0x02 << 16)) -#define SG_MEMCONF_CH2_SZ_256M ((0x0 << 26) | (0x03 << 16)) -#define SG_MEMCONF_CH2_SZ_512M ((0x1 << 26) | (0x00 << 16)) -#define SG_MEMCONF_CH2_NUM_1 (0x1 << 24) -#define SG_MEMCONF_CH2_NUM_2 (0x0 << 24) - -#define SG_MEMCONF_SPARSEMEM (0x1 << 4) - -/* Pin Control */ -#define SG_PINCTRL_BASE (SG_CTRL_BASE | 0x1000) - -#if defined(CONFIG_MACH_PH1_PRO4) -# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 8) -#elif defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) -# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 4) -#endif - -#if defined(CONFIG_MACH_PH1_PRO4) -#define SG_PINSELBITS 4 -#elif defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) -#define SG_PINSELBITS 8 -#endif - -#define SG_PINSEL_ADDR(n) (SG_PINCTRL((n) * (SG_PINSELBITS) / 32)) -#define SG_PINSEL_MASK(n) (~(((1 << (SG_PINSELBITS)) - 1) << \ - ((n) * (SG_PINSELBITS) % 32))) -#define SG_PINSEL_MODE(n, mode) ((mode) << ((n) * (SG_PINSELBITS) % 32)) - -/* Only for PH1-Pro4 */ -#define SG_LOADPINCTRL (SG_CTRL_BASE | 0x1700) - -/* Input Enable */ -#define SG_IECTRL (SG_CTRL_BASE | 0x1d00) - -/* Pin Monitor */ -#define SG_PINMON0 (SG_DBG_BASE | 0x0100) - -#define SG_PINMON0_CLK_MODE_UPLLSRC_MASK (0x3 << 19) -#define SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT (0x0 << 19) -#define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27A (0x2 << 19) -#define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27B (0x3 << 19) - -#define SG_PINMON0_CLK_MODE_AXOSEL_MASK (0x3 << 16) -#define SG_PINMON0_CLK_MODE_AXOSEL_24576KHZ (0x0 << 16) -#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ (0x1 << 16) -#define SG_PINMON0_CLK_MODE_AXOSEL_6144KHZ (0x2 << 16) -#define SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ (0x3 << 16) - -#define SG_PINMON0_CLK_MODE_AXOSEL_DEFAULT (0x0 << 16) -#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U (0x1 << 16) -#define SG_PINMON0_CLK_MODE_AXOSEL_20480KHZ (0x2 << 16) -#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A (0x3 << 16) - -#ifdef __ASSEMBLY__ - - .macro set_pinsel, n, value, ra, rd - ldr \ra, =SG_PINSEL_ADDR(\n) - ldr \rd, [\ra] - and \rd, \rd, #SG_PINSEL_MASK(\n) - orr \rd, \rd, #SG_PINSEL_MODE(\n, \value) - str \rd, [\ra] - .endm - -#else - -#include <linux/types.h> -#include <linux/sizes.h> -#include <asm/io.h> - -static inline void sg_set_pinsel(int n, int value) -{ - writel((readl(SG_PINSEL_ADDR(n)) & SG_PINSEL_MASK(n)) - | SG_PINSEL_MODE(n, value), SG_PINSEL_ADDR(n)); -} - -static inline u32 sg_memconf_val_ch0(unsigned long size, int num) -{ - int size_mb = size / num; - u32 ret; - - switch (size_mb) { - case SZ_64M: - ret = SG_MEMCONF_CH0_SZ_64M; - break; - case SZ_128M: - ret = SG_MEMCONF_CH0_SZ_128M; - break; - case SZ_256M: - ret = SG_MEMCONF_CH0_SZ_256M; - break; - case SZ_512M: - ret = SG_MEMCONF_CH0_SZ_512M; - break; - case SZ_1G: - ret = SG_MEMCONF_CH0_SZ_1G; - break; - default: - BUG(); - break; - } - - switch (num) { - case 1: - ret |= SG_MEMCONF_CH0_NUM_1; - break; - case 2: - ret |= SG_MEMCONF_CH0_NUM_2; - break; - default: - BUG(); - break; - } - return ret; -} - -static inline u32 sg_memconf_val_ch1(unsigned long size, int num) -{ - int size_mb = size / num; - u32 ret; - - switch (size_mb) { - case SZ_64M: - ret = SG_MEMCONF_CH1_SZ_64M; - break; - case SZ_128M: - ret = SG_MEMCONF_CH1_SZ_128M; - break; - case SZ_256M: - ret = SG_MEMCONF_CH1_SZ_256M; - break; - case SZ_512M: - ret = SG_MEMCONF_CH1_SZ_512M; - break; - case SZ_1G: - ret = SG_MEMCONF_CH1_SZ_1G; - break; - default: - BUG(); - break; - } - - switch (num) { - case 1: - ret |= SG_MEMCONF_CH1_NUM_1; - break; - case 2: - ret |= SG_MEMCONF_CH1_NUM_2; - break; - default: - BUG(); - break; - } - return ret; -} - -static inline u32 sg_memconf_val_ch2(unsigned long size, int num) -{ - int size_mb = size / num; - u32 ret; - - switch (size_mb) { - case SZ_64M: - ret = SG_MEMCONF_CH2_SZ_64M; - break; - case SZ_128M: - ret = SG_MEMCONF_CH2_SZ_128M; - break; - case SZ_256M: - ret = SG_MEMCONF_CH2_SZ_256M; - break; - case SZ_512M: - ret = SG_MEMCONF_CH2_SZ_512M; - break; - default: - BUG(); - break; - } - - switch (num) { - case 1: - ret |= SG_MEMCONF_CH2_NUM_1; - break; - case 2: - ret |= SG_MEMCONF_CH2_NUM_2; - break; - default: - BUG(); - break; - } - return ret; -} -#endif /* __ASSEMBLY__ */ - -#endif /* ARCH_SG_REGS_H */ diff --git a/arch/arm/include/asm/arch-uniphier/ssc-regs.h b/arch/arm/include/asm/arch-uniphier/ssc-regs.h deleted file mode 100644 index 77b3470..0000000 --- a/arch/arm/include/asm/arch-uniphier/ssc-regs.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * UniPhier System Cache (L2 Cache) registers - * - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_SSC_REGS_H -#define ARCH_SSC_REGS_H - -#define SSCC 0x500c0000 -#define SSCC_BST (0x1 << 20) -#define SSCC_ACT (0x1 << 19) -#define SSCC_WTG (0x1 << 18) -#define SSCC_PRD (0x1 << 17) -#define SSCC_WBWA (0x1 << 16) -#define SSCC_EX (0x1 << 13) -#define SSCC_ON (0x1 << 0) - -#define SSCLPDAWCR 0x500c0030 - -#define SSCOPE 0x506c0244 -#define SSCOPE_CM_SYNC 0x00000008 - -#define SSCOQM 0x506c0248 -#define SSCOQM_TID_MASK (0x3 << 21) -#define SSCOQM_TID_BY_WAY (0x2 << 21) -#define SSCOQM_TID_BY_INST_WAY (0x1 << 21) -#define SSCOQM_TID_BY_DATA_WAY (0x0 << 21) -#define SSCOQM_S_MASK (0x3 << 17) -#define SSCOQM_S_WAY (0x2 << 17) -#define SSCOQM_S_ALL (0x1 << 17) -#define SSCOQM_S_ADDRESS (0x0 << 17) -#define SSCOQM_CE (0x1 << 15) -#define SSCOQM_CW (0x1 << 14) -#define SSCOQM_CM_MASK (0x7) -#define SSCOQM_CM_DIRT_TOUCH (0x7) -#define SSCOQM_CM_ZERO_TOUCH (0x6) -#define SSCOQM_CM_NORM_TOUCH (0x5) -#define SSCOQM_CM_PREF_FETCH (0x4) -#define SSCOQM_CM_SSC_FETCH (0x3) -#define SSCOQM_CM_WB_INV (0x2) -#define SSCOQM_CM_WB (0x1) -#define SSCOQM_CM_INV (0x0) - -#define SSCOQAD 0x506c024c -#define SSCOQSZ 0x506c0250 -#define SSCOQWN 0x506c0258 - -#define SSCOPPQSEF 0x506c025c -#define SSCOPPQSEF_FE (0x1 << 1) -#define SSCOPPQSEF_OE (0x1 << 0) - -#define SSCOLPQS 0x506c0260 -#define SSCOLPQS_EF (0x1 << 2) -#define SSCOLPQS_EST (0x1 << 1) -#define SSCOLPQS_QST (0x1 << 0) - -#define SSCOQCE0 0x506c0270 - -#define SSC_LINE_SIZE 128 -#define SSC_NUM_ENTRIES 256 -#define SSC_WAY_SIZE ((SSC_LINE_SIZE) * (SSC_NUM_ENTRIES)) -#define SSC_RANGE_OP_MAX_SIZE (0x00400000 - (SSC_LINE_SIZE)) - -#endif /* ARCH_SSC_REGS_H */ diff --git a/arch/arm/include/asm/arch-uniphier/umc-regs.h b/arch/arm/include/asm/arch-uniphier/umc-regs.h deleted file mode 100644 index 6159281..0000000 --- a/arch/arm/include/asm/arch-uniphier/umc-regs.h +++ /dev/null @@ -1,119 +0,0 @@ -/* - * UniPhier UMC (Universal Memory Controller) registers - * - * Copyright (C) 2011-2014 Panasonic Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_UMC_REGS_H -#define ARCH_UMC_REGS_H - -#define UMC_BASE 0x5b800000 - -/* SSIF registers */ -#define UMC_SSIF_BASE UMC_BASE - -#define UMC_CPURST 0x00000700 -#define UMC_IDSRST 0x0000070C -#define UMC_IXMRST 0x00000714 -#define UMC_HDMRST 0x00000718 -#define UMC_MDMRST 0x0000071C -#define UMC_HDDRST 0x00000720 -#define UMC_MDDRST 0x00000724 -#define UMC_SIORST 0x00000728 -#define UMC_GIORST 0x0000072C -#define UMC_HD2RST 0x00000734 -#define UMC_VIORST 0x0000073C -#define UMC_FRCRST 0x00000748 /* LD4/sLD8 */ -#define UMC_DVCRST 0x00000748 /* Pro4 */ -#define UMC_RGLRST 0x00000750 -#define UMC_VPERST 0x00000758 -#define UMC_AIORST 0x00000764 -#define UMC_DMDRST 0x00000770 - -#define UMC_HDMCHSEL 0x00000898 -#define UMC_MDMCHSEL 0x0000089C -#define UMC_DVCCHSEL 0x000008C8 -#define UMC_DMDCHSEL 0x000008F0 - -#define UMC_CLKEN_SSIF_FETCH 0x0000C060 -#define UMC_CLKEN_SSIF_COMQUE0 0x0000C064 -#define UMC_CLKEN_SSIF_COMWC0 0x0000C068 -#define UMC_CLKEN_SSIF_COMRC0 0x0000C06C -#define UMC_CLKEN_SSIF_COMQUE1 0x0000C070 -#define UMC_CLKEN_SSIF_COMWC1 0x0000C074 -#define UMC_CLKEN_SSIF_COMRC1 0x0000C078 -#define UMC_CLKEN_SSIF_WC 0x0000C07C -#define UMC_CLKEN_SSIF_RC 0x0000C080 -#define UMC_CLKEN_SSIF_DST 0x0000C084 - -/* CA registers */ -#define UMC_CA_BASE(ch) (UMC_BASE + 0x00001000 + 0x00001000 * (ch)) - -/* DRAM controller registers */ -#define UMC_DRAMCONT_BASE(ch) (UMC_BASE + 0x00400000 + 0x00200000 * (ch)) - -#define UMC_CMDCTLA 0x00000000 -#define UMC_CMDCTLB 0x00000004 -#define UMC_INITCTLA 0x00000008 -#define UMC_INITCTLB 0x0000000C -#define UMC_INITCTLC 0x00000010 -#define UMC_INITSET 0x00000014 -#define UMC_INITSTAT 0x00000018 -#define UMC_DRMMR0 0x0000001C -#define UMC_DRMMR1 0x00000020 -#define UMC_DRMMR2 0x00000024 -#define UMC_DRMMR3 0x00000028 -#define UMC_SPCCTLA 0x00000030 -#define UMC_SPCCTLB 0x00000034 -#define UMC_SPCSETA 0x00000038 -#define UMC_SPCSETB 0x0000003C -#define UMC_SPCSETC 0x00000040 -#define UMC_SPCSETD 0x00000044 -#define UMC_SPCSTATA 0x00000050 -#define UMC_SPCSTATB 0x00000054 -#define UMC_SPCSTATC 0x00000058 -#define UMC_ACSSETA 0x00000060 -#define UMC_FLOWCTLA 0x00000400 -#define UMC_FLOWCTLB 0x00000404 -#define UMC_FLOWCTLC 0x00000408 -#define UMC_FLOWCTLG 0x00000508 -#define UMC_RDATACTL_D0 0x00000600 -#define UMC_WDATACTL_D0 0x00000604 -#define UMC_RDATACTL_D1 0x00000608 -#define UMC_WDATACTL_D1 0x0000060C -#define UMC_DATASET 0x00000610 -#define UMC_DCCGCTL 0x00000720 -#define UMC_DICGCTLA 0x00000724 -#define UMC_DICGCTLB 0x00000728 -#define UMC_DIOCTLA 0x00000C00 -#define UMC_DFICUPDCTLA 0x00000C20 - -#ifndef __ASSEMBLY__ - -#include <linux/types.h> - -static inline void umc_polling(u32 address, u32 expval, u32 mask) -{ - u32 nmask = ~mask; - u32 data; - do { - data = readl(address) & nmask; - } while (data != expval); -} - -static inline void umc_dram_init_start(void __iomem *dramcont) -{ - writel(0x00000002, dramcont + UMC_INITSET); -} - -static inline void umc_dram_init_poll(void __iomem *dramcont) -{ - while ((readl(dramcont + UMC_INITSTAT) & 0x00000002)) - ; -} - -#endif - -#endif |