diff options
Diffstat (limited to 'arch/arm/include/asm/arch-tegra20')
27 files changed, 3012 insertions, 0 deletions
diff --git a/arch/arm/include/asm/arch-tegra20/ap20.h b/arch/arm/include/asm/arch-tegra20/ap20.h new file mode 100644 index 0000000..c84d22f --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/ap20.h @@ -0,0 +1,109 @@ +/* + * (C) Copyright 2010-2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <asm/types.h> + +/* Stabilization delays, in usec */ +#define PLL_STABILIZATION_DELAY (300) +#define IO_STABILIZATION_DELAY (1000) + +#define NVBL_PLLP_KHZ (216000) + +#define PLLX_ENABLED (1 << 30) +#define CCLK_BURST_POLICY 0x20008888 +#define SUPER_CCLK_DIVIDER 0x80000000 + +/* Calculate clock fractional divider value from ref and target frequencies */ +#define CLK_DIVIDER(REF, FREQ) ((((REF) * 2) / FREQ) - 2) + +/* Calculate clock frequency value from reference and clock divider value */ +#define CLK_FREQUENCY(REF, REG) (((REF) * 2) / (REG + 2)) + +/* AVP/CPU ID */ +#define PG_UP_TAG_0_PID_CPU 0x55555555 /* CPU aka "a9" aka "mpcore" */ +#define PG_UP_TAG_0 0x0 + +#define CORESIGHT_UNLOCK 0xC5ACCE55; + +/* AP20-Specific Base Addresses */ + +/* AP20 Base physical address of SDRAM. */ +#define AP20_BASE_PA_SDRAM 0x00000000 +/* AP20 Base physical address of internal SRAM. */ +#define AP20_BASE_PA_SRAM 0x40000000 +/* AP20 Size of internal SRAM (256KB). */ +#define AP20_BASE_PA_SRAM_SIZE 0x00040000 +/* AP20 Base physical address of flash. */ +#define AP20_BASE_PA_NOR_FLASH 0xD0000000 +/* AP20 Base physical address of boot information table. */ +#define AP20_BASE_PA_BOOT_INFO AP20_BASE_PA_SRAM + +/* + * Super-temporary stacks for EXTREMELY early startup. The values chosen for + * these addresses must be valid on ALL SOCs because this value is used before + * we are able to differentiate between the SOC types. + * + * NOTE: The since CPU's stack will eventually be moved from IRAM to SDRAM, its + * stack is placed below the AVP stack. Once the CPU stack has been moved, + * the AVP is free to use the IRAM the CPU stack previously occupied if + * it should need to do so. + * + * NOTE: In multi-processor CPU complex configurations, each processor will have + * its own stack of size CPU_EARLY_BOOT_STACK_SIZE. CPU 0 will have a + * limit of CPU_EARLY_BOOT_STACK_LIMIT. Each successive CPU will have a + * stack limit that is CPU_EARLY_BOOT_STACK_SIZE less then the previous + * CPU. + */ + +/* Common AVP early boot stack limit */ +#define AVP_EARLY_BOOT_STACK_LIMIT \ + (AP20_BASE_PA_SRAM + (AP20_BASE_PA_SRAM_SIZE/2)) +/* Common AVP early boot stack size */ +#define AVP_EARLY_BOOT_STACK_SIZE 0x1000 +/* Common CPU early boot stack limit */ +#define CPU_EARLY_BOOT_STACK_LIMIT \ + (AVP_EARLY_BOOT_STACK_LIMIT - AVP_EARLY_BOOT_STACK_SIZE) +/* Common CPU early boot stack size */ +#define CPU_EARLY_BOOT_STACK_SIZE 0x1000 + +#define EXCEP_VECTOR_CPU_RESET_VECTOR (NV_PA_EVP_BASE + 0x100) +#define CSITE_CPU_DBG0_LAR (NV_PA_CSITE_BASE + 0x10FB0) +#define CSITE_CPU_DBG1_LAR (NV_PA_CSITE_BASE + 0x12FB0) + +#define FLOW_CTLR_HALT_COP_EVENTS (NV_PA_FLOW_BASE + 4) +#define FLOW_MODE_STOP 2 +#define HALT_COP_EVENT_JTAG (1 << 28) +#define HALT_COP_EVENT_IRQ_1 (1 << 11) +#define HALT_COP_EVENT_FIQ_1 (1 << 9) + +/* Start up the tegra20 SOC */ +void tegra20_start(void); + +/* This is the main entry into U-Boot, used by the Cortex-A9 */ +extern void _start(void); + +/** + * Works out the SOC type used for clocks settings + * + * @return SOC type - see TEGRA_SOC... + */ +int tegra_get_chip_type(void); diff --git a/arch/arm/include/asm/arch-tegra20/apb_misc.h b/arch/arm/include/asm/arch-tegra20/apb_misc.h new file mode 100644 index 0000000..eb69d18 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/apb_misc.h @@ -0,0 +1,36 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _GP_PADCTRL_H_ +#define _GP_PADCTRL_H_ + +/* APB_MISC_PP registers */ +struct apb_misc_pp_ctlr { + u32 reserved0[2]; + u32 strapping_opt_a;/* 0x08: APB_MISC_PP_STRAPPING_OPT_A */ +}; + +/* bit fields definitions for APB_MISC_PP_STRAPPING_OPT_A register */ +#define RAM_CODE_SHIFT 4 +#define RAM_CODE_MASK (0xf << RAM_CODE_SHIFT) + +#endif diff --git a/arch/arm/include/asm/arch-tegra20/board.h b/arch/arm/include/asm/arch-tegra20/board.h new file mode 100644 index 0000000..a90d36c --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/board.h @@ -0,0 +1,30 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _TEGRA_BOARD_H_ +#define _TEGRA_BOARD_H_ + +/* Setup UARTs for the board according to the selected config */ +void board_init_uart_f(void); + +#endif diff --git a/arch/arm/include/asm/arch-tegra20/clk_rst.h b/arch/arm/include/asm/arch-tegra20/clk_rst.h new file mode 100644 index 0000000..8c3be91 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/clk_rst.h @@ -0,0 +1,147 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _CLK_RST_H_ +#define _CLK_RST_H_ + +/* PLL registers - there are several PLLs in the clock controller */ +struct clk_pll { + uint pll_base; /* the control register */ + uint pll_out; /* output control */ + uint reserved; + uint pll_misc; /* other misc things */ +}; + +/* PLL registers - there are several PLLs in the clock controller */ +struct clk_pll_simple { + uint pll_base; /* the control register */ + uint pll_misc; /* other misc things */ +}; + +/* + * Most PLLs use the clk_pll structure, but some have a simpler two-member + * structure for which we use clk_pll_simple. The reason for this non- + * othogonal setup is not stated. + */ +enum { + TEGRA_CLK_PLLS = 6, /* Number of normal PLLs */ + TEGRA_CLK_SIMPLE_PLLS = 3, /* Number of simple PLLs */ + TEGRA_CLK_REGS = 3, /* Number of clock enable registers */ + TEGRA_CLK_SOURCES = 64, /* Number of peripheral clock sources */ +}; + +/* Clock/Reset Controller (CLK_RST_CONTROLLER_) regs */ +struct clk_rst_ctlr { + uint crc_rst_src; /* _RST_SOURCE_0,0x00 */ + uint crc_rst_dev[TEGRA_CLK_REGS]; /* _RST_DEVICES_L/H/U_0 */ + uint crc_clk_out_enb[TEGRA_CLK_REGS]; /* _CLK_OUT_ENB_L/H/U_0 */ + uint crc_reserved0; /* reserved_0, 0x1C */ + uint crc_cclk_brst_pol; /* _CCLK_BURST_POLICY_0,0x20 */ + uint crc_super_cclk_div; /* _SUPER_CCLK_DIVIDER_0,0x24 */ + uint crc_sclk_brst_pol; /* _SCLK_BURST_POLICY_0, 0x28 */ + uint crc_super_sclk_div; /* _SUPER_SCLK_DIVIDER_0,0x2C */ + uint crc_clk_sys_rate; /* _CLK_SYSTEM_RATE_0, 0x30 */ + uint crc_prog_dly_clk; /* _PROG_DLY_CLK_0, 0x34 */ + uint crc_aud_sync_clk_rate; /* _AUDIO_SYNC_CLK_RATE_0,0x38 */ + uint crc_reserved1; /* reserved_1, 0x3C */ + uint crc_cop_clk_skip_plcy; /* _COP_CLK_SKIP_POLICY_0,0x40 */ + uint crc_clk_mask_arm; /* _CLK_MASK_ARM_0, 0x44 */ + uint crc_misc_clk_enb; /* _MISC_CLK_ENB_0, 0x48 */ + uint crc_clk_cpu_cmplx; /* _CLK_CPU_CMPLX_0, 0x4C */ + uint crc_osc_ctrl; /* _OSC_CTRL_0, 0x50 */ + uint crc_pll_lfsr; /* _PLL_LFSR_0, 0x54 */ + uint crc_osc_freq_det; /* _OSC_FREQ_DET_0, 0x58 */ + uint crc_osc_freq_det_stat; /* _OSC_FREQ_DET_STATUS_0,0x5C */ + uint crc_reserved2[8]; /* reserved_2[8], 0x60-7C */ + + struct clk_pll crc_pll[TEGRA_CLK_PLLS]; /* PLLs from 0x80 to 0xdc */ + + /* PLLs from 0xe0 to 0xf4 */ + struct clk_pll_simple crc_pll_simple[TEGRA_CLK_SIMPLE_PLLS]; + + uint crc_reserved10; /* _reserved_10, 0xF8 */ + uint crc_reserved11; /* _reserved_11, 0xFC */ + + uint crc_clk_src[TEGRA_CLK_SOURCES]; /*_I2S1_0... 0x100-1fc */ + uint crc_reserved20[80]; /* 0x200-33C */ + uint crc_cpu_cmplx_set; /* _CPU_CMPLX_SET_0, 0x340 */ + uint crc_cpu_cmplx_clr; /* _CPU_CMPLX_CLR_0, 0x344 */ +}; + +/* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_0 */ +#define CPU1_CLK_STP_SHIFT 9 + +#define CPU0_CLK_STP_SHIFT 8 +#define CPU0_CLK_STP_MASK (1U << CPU0_CLK_STP_SHIFT) + +/* CLK_RST_CONTROLLER_PLLx_BASE_0 */ +#define PLL_BYPASS_SHIFT 31 +#define PLL_BYPASS_MASK (1U << PLL_BYPASS_SHIFT) + +#define PLL_ENABLE_SHIFT 30 +#define PLL_ENABLE_MASK (1U << PLL_ENABLE_SHIFT) + +#define PLL_BASE_OVRRIDE_MASK (1U << 28) + +#define PLL_DIVP_SHIFT 20 +#define PLL_DIVP_MASK (7U << PLL_DIVP_SHIFT) + +#define PLL_DIVN_SHIFT 8 +#define PLL_DIVN_MASK (0x3ffU << PLL_DIVN_SHIFT) + +#define PLL_DIVM_SHIFT 0 +#define PLL_DIVM_MASK (0x1f << PLL_DIVM_SHIFT) + +/* CLK_RST_CONTROLLER_PLLx_MISC_0 */ +#define PLL_CPCON_SHIFT 8 +#define PLL_CPCON_MASK (15U << PLL_CPCON_SHIFT) + +#define PLL_LFCON_SHIFT 4 +#define PLL_LFCON_MASK (15U << PLL_LFCON_SHIFT) + +#define PLLU_VCO_FREQ_SHIFT 20 +#define PLLU_VCO_FREQ_MASK (1U << PLLU_VCO_FREQ_SHIFT) + +/* CLK_RST_CONTROLLER_OSC_CTRL_0 */ +#define OSC_FREQ_SHIFT 30 +#define OSC_FREQ_MASK (3U << OSC_FREQ_SHIFT) +#define OSC_XOBP_SHIFT 1 +#define OSC_XOBP_MASK (1U << OSC_XOBP_SHIFT) + +/* + * CLK_RST_CONTROLLER_CLK_SOURCE_x_OUT_0 - the mask here is normally 8 bits + * but can be 16. We could use knowledge we have to restrict the mask in + * the 8-bit cases (the divider_bits value returned by + * get_periph_clock_source()) but it does not seem worth it since the code + * already checks the ranges of values it is writing, in clk_get_divider(). + */ +#define OUT_CLK_DIVISOR_SHIFT 0 +#define OUT_CLK_DIVISOR_MASK (0xffff << OUT_CLK_DIVISOR_SHIFT) + +#define OUT_CLK_SOURCE_SHIFT 30 +#define OUT_CLK_SOURCE_MASK (3U << OUT_CLK_SOURCE_SHIFT) + +#define OUT_CLK_SOURCE4_SHIFT 28 +#define OUT_CLK_SOURCE4_MASK (15U << OUT_CLK_SOURCE4_SHIFT) + +#endif /* CLK_RST_H */ diff --git a/arch/arm/include/asm/arch-tegra20/clock.h b/arch/arm/include/asm/arch-tegra20/clock.h new file mode 100644 index 0000000..ff83bbf --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/clock.h @@ -0,0 +1,407 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Tegra2 clock control functions */ + +#ifndef _CLOCK_H +#define _CLOCK_H + +/* Set of oscillator frequencies supported in the internal API. */ +enum clock_osc_freq { + /* All in MHz, so 13_0 is 13.0MHz */ + CLOCK_OSC_FREQ_13_0, + CLOCK_OSC_FREQ_19_2, + CLOCK_OSC_FREQ_12_0, + CLOCK_OSC_FREQ_26_0, + + CLOCK_OSC_FREQ_COUNT, +}; + +/* The PLLs supported by the hardware */ +enum clock_id { + CLOCK_ID_FIRST, + CLOCK_ID_CGENERAL = CLOCK_ID_FIRST, + CLOCK_ID_MEMORY, + CLOCK_ID_PERIPH, + CLOCK_ID_AUDIO, + CLOCK_ID_USB, + CLOCK_ID_DISPLAY, + + /* now the simple ones */ + CLOCK_ID_FIRST_SIMPLE, + CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE, + CLOCK_ID_EPCI, + CLOCK_ID_SFROM32KHZ, + + /* These are the base clocks (inputs to the Tegra SOC) */ + CLOCK_ID_32KHZ, + CLOCK_ID_OSC, + + CLOCK_ID_COUNT, /* number of clocks */ + CLOCK_ID_NONE = -1, +}; + +/* The clocks supported by the hardware */ +enum periph_id { + PERIPH_ID_FIRST, + + /* Low word: 31:0 */ + PERIPH_ID_CPU = PERIPH_ID_FIRST, + PERIPH_ID_RESERVED1, + PERIPH_ID_RESERVED2, + PERIPH_ID_AC97, + PERIPH_ID_RTC, + PERIPH_ID_TMR, + PERIPH_ID_UART1, + PERIPH_ID_UART2, + + /* 8 */ + PERIPH_ID_GPIO, + PERIPH_ID_SDMMC2, + PERIPH_ID_SPDIF, + PERIPH_ID_I2S1, + PERIPH_ID_I2C1, + PERIPH_ID_NDFLASH, + PERIPH_ID_SDMMC1, + PERIPH_ID_SDMMC4, + + /* 16 */ + PERIPH_ID_TWC, + PERIPH_ID_PWM, + PERIPH_ID_I2S2, + PERIPH_ID_EPP, + PERIPH_ID_VI, + PERIPH_ID_2D, + PERIPH_ID_USBD, + PERIPH_ID_ISP, + + /* 24 */ + PERIPH_ID_3D, + PERIPH_ID_IDE, + PERIPH_ID_DISP2, + PERIPH_ID_DISP1, + PERIPH_ID_HOST1X, + PERIPH_ID_VCP, + PERIPH_ID_RESERVED30, + PERIPH_ID_CACHE2, + + /* Middle word: 63:32 */ + PERIPH_ID_MEM, + PERIPH_ID_AHBDMA, + PERIPH_ID_APBDMA, + PERIPH_ID_RESERVED35, + PERIPH_ID_KBC, + PERIPH_ID_STAT_MON, + PERIPH_ID_PMC, + PERIPH_ID_FUSE, + + /* 40 */ + PERIPH_ID_KFUSE, + PERIPH_ID_SBC1, + PERIPH_ID_SNOR, + PERIPH_ID_SPI1, + PERIPH_ID_SBC2, + PERIPH_ID_XIO, + PERIPH_ID_SBC3, + PERIPH_ID_DVC_I2C, + + /* 48 */ + PERIPH_ID_DSI, + PERIPH_ID_TVO, + PERIPH_ID_MIPI, + PERIPH_ID_HDMI, + PERIPH_ID_CSI, + PERIPH_ID_TVDAC, + PERIPH_ID_I2C2, + PERIPH_ID_UART3, + + /* 56 */ + PERIPH_ID_RESERVED56, + PERIPH_ID_EMC, + PERIPH_ID_USB2, + PERIPH_ID_USB3, + PERIPH_ID_MPE, + PERIPH_ID_VDE, + PERIPH_ID_BSEA, + PERIPH_ID_BSEV, + + /* Upper word 95:64 */ + PERIPH_ID_SPEEDO, + PERIPH_ID_UART4, + PERIPH_ID_UART5, + PERIPH_ID_I2C3, + PERIPH_ID_SBC4, + PERIPH_ID_SDMMC3, + PERIPH_ID_PCIE, + PERIPH_ID_OWR, + + /* 72 */ + PERIPH_ID_AFI, + PERIPH_ID_CORESIGHT, + PERIPH_ID_RESERVED74, + PERIPH_ID_AVPUCQ, + PERIPH_ID_RESERVED76, + PERIPH_ID_RESERVED77, + PERIPH_ID_RESERVED78, + PERIPH_ID_RESERVED79, + + /* 80 */ + PERIPH_ID_RESERVED80, + PERIPH_ID_RESERVED81, + PERIPH_ID_RESERVED82, + PERIPH_ID_RESERVED83, + PERIPH_ID_IRAMA, + PERIPH_ID_IRAMB, + PERIPH_ID_IRAMC, + PERIPH_ID_IRAMD, + + /* 88 */ + PERIPH_ID_CRAM2, + + PERIPH_ID_COUNT, + PERIPH_ID_NONE = -1, +}; + +/* Converts a clock number to a clock register: 0=L, 1=H, 2=U */ +#define PERIPH_REG(id) ((id) >> 5) + +/* Mask value for a clock (within PERIPH_REG(id)) */ +#define PERIPH_MASK(id) (1 << ((id) & 0x1f)) + +/* return 1 if a PLL ID is in range, and not a simple PLL */ +#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && \ + (id) < CLOCK_ID_FIRST_SIMPLE) + +/* PLL stabilization delay in usec */ +#define CLOCK_PLL_STABLE_DELAY_US 300 + +/* return the current oscillator clock frequency */ +enum clock_osc_freq clock_get_osc_freq(void); + +/** + * Start PLL using the provided configuration parameters. + * + * @param id clock id + * @param divm input divider + * @param divn feedback divider + * @param divp post divider 2^n + * @param cpcon charge pump setup control + * @param lfcon loop filter setup control + * + * @returns monotonic time in us that the PLL will be stable + */ +unsigned long clock_start_pll(enum clock_id id, u32 divm, u32 divn, + u32 divp, u32 cpcon, u32 lfcon); + +/** + * Read low-level parameters of a PLL. + * + * @param id clock id to read (note: USB is not supported) + * @param divm returns input divider + * @param divn returns feedback divider + * @param divp returns post divider 2^n + * @param cpcon returns charge pump setup control + * @param lfcon returns loop filter setup control + * + * @returns 0 if ok, -1 on error (invalid clock id) + */ +int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn, + u32 *divp, u32 *cpcon, u32 *lfcon); + +/* + * Enable a clock + * + * @param id clock id + */ +void clock_enable(enum periph_id clkid); + +/* + * Disable a clock + * + * @param id clock id + */ +void clock_disable(enum periph_id clkid); + +/* + * Set whether a clock is enabled or disabled. + * + * @param id clock id + * @param enable 1 to enable, 0 to disable + */ +void clock_set_enable(enum periph_id clkid, int enable); + +/** + * Reset a peripheral. This puts it in reset, waits for a delay, then takes + * it out of reset and waits for th delay again. + * + * @param periph_id peripheral to reset + * @param us_delay time to delay in microseconds + */ +void reset_periph(enum periph_id periph_id, int us_delay); + +/** + * Put a peripheral into or out of reset. + * + * @param periph_id peripheral to reset + * @param enable 1 to put into reset, 0 to take out of reset + */ +void reset_set_enable(enum periph_id periph_id, int enable); + + +/* CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET/CLR_0 */ +enum crc_reset_id { + /* Things we can hold in reset for each CPU */ + crc_rst_cpu = 1, + crc_rst_de = 1 << 2, /* What is de? */ + crc_rst_watchdog = 1 << 3, + crc_rst_debug = 1 << 4, +}; + +/** + * Put parts of the CPU complex into or out of reset.\ + * + * @param cpu cpu number (0 or 1 on Tegra2) + * @param which which parts of the complex to affect (OR of crc_reset_id) + * @param reset 1 to assert reset, 0 to de-assert + */ +void reset_cmplx_set_enable(int cpu, int which, int reset); + +/** + * Set the source for a peripheral clock. This plus the divisor sets the + * clock rate. You need to look up the datasheet to see the meaning of the + * source parameter as it changes for each peripheral. + * + * Warning: This function is only for use pre-relocation. Please use + * clock_start_periph_pll() instead. + * + * @param periph_id peripheral to adjust + * @param source source clock (0, 1, 2 or 3) + */ +void clock_ll_set_source(enum periph_id periph_id, unsigned source); + +/** + * Set the source and divisor for a peripheral clock. This sets the + * clock rate. You need to look up the datasheet to see the meaning of the + * source parameter as it changes for each peripheral. + * + * Warning: This function is only for use pre-relocation. Please use + * clock_start_periph_pll() instead. + * + * @param periph_id peripheral to adjust + * @param source source clock (0, 1, 2 or 3) + * @param divisor divisor value to use + */ +void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source, + unsigned divisor); + +/** + * Start a peripheral PLL clock at the given rate. This also resets the + * peripheral. + * + * @param periph_id peripheral to start + * @param parent PLL id of required parent clock + * @param rate Required clock rate in Hz + * @return rate selected in Hz, or -1U if something went wrong + */ +unsigned clock_start_periph_pll(enum periph_id periph_id, + enum clock_id parent, unsigned rate); + +/** + * Returns the rate of a peripheral clock in Hz. Since the caller almost + * certainly knows the parent clock (having just set it) we require that + * this be passed in so we don't need to work it out. + * + * @param periph_id peripheral to start + * @param parent PLL id of parent clock (used to calculate rate, you + * must know this!) + * @return clock rate of peripheral in Hz + */ +unsigned long clock_get_periph_rate(enum periph_id periph_id, + enum clock_id parent); + +/** + * Adjust peripheral PLL clock to the given rate. This does not reset the + * peripheral. If a second stage divisor is not available, pass NULL for + * extra_div. If it is available, then this parameter will return the + * divisor selected (which will be a power of 2 from 1 to 256). + * + * @param periph_id peripheral to start + * @param parent PLL id of required parent clock + * @param rate Required clock rate in Hz + * @param extra_div value for the second-stage divisor (NULL if one is + not available) + * @return rate selected in Hz, or -1U if something went wrong + */ +unsigned clock_adjust_periph_pll_div(enum periph_id periph_id, + enum clock_id parent, unsigned rate, int *extra_div); + +/** + * Returns the clock rate of a specified clock, in Hz. + * + * @param parent PLL id of clock to check + * @return rate of clock in Hz + */ +unsigned clock_get_rate(enum clock_id clkid); + +/** + * Start up a UART using low-level calls + * + * Prior to relocation clock_start_periph_pll() cannot be called. This + * function provides a way to set up a UART using low-level calls which + * do not require BSS. + * + * @param periph_id Peripheral ID of UART to enable (e,g, PERIPH_ID_UART1) + */ +void clock_ll_start_uart(enum periph_id periph_id); + +/** + * Decode a peripheral ID from a device tree node. + * + * This works by looking up the peripheral's 'clocks' node and reading out + * the second cell, which is the clock number / peripheral ID. + * + * @param blob FDT blob to use + * @param node Node to look at + * @return peripheral ID, or PERIPH_ID_NONE if none + */ +enum periph_id clock_decode_periph_id(const void *blob, int node); + +/** + * Checks if the oscillator bypass is enabled (XOBP bit) + * + * @return 1 if bypass is enabled, 0 if not + */ +int clock_get_osc_bypass(void); + +/* + * Checks that clocks are valid and prints a warning if not + * + * @return 0 if ok, -1 on error + */ +int clock_verify(void); + +/* Initialize the clocks */ +void clock_init(void); + +/* Initialize the PLLs */ +void clock_early_init(void); + +#endif diff --git a/arch/arm/include/asm/arch-tegra20/emc.h b/arch/arm/include/asm/arch-tegra20/emc.h new file mode 100644 index 0000000..deb3d36 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/emc.h @@ -0,0 +1,113 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ARCH_EMC_H_ +#define _ARCH_EMC_H_ + +#include <asm/types.h> + +#define TEGRA_EMC_NUM_REGS 46 + +/* EMC Registers */ +struct emc_ctlr { + u32 cfg; /* 0x00: EMC_CFG */ + u32 reserved0[3]; /* 0x04 ~ 0x0C */ + u32 adr_cfg; /* 0x10: EMC_ADR_CFG */ + u32 adr_cfg1; /* 0x14: EMC_ADR_CFG_1 */ + u32 reserved1[2]; /* 0x18 ~ 0x18 */ + u32 refresh_ctrl; /* 0x20: EMC_REFCTRL */ + u32 pin; /* 0x24: EMC_PIN */ + u32 timing_ctrl; /* 0x28: EMC_TIMING_CONTROL */ + u32 rc; /* 0x2C: EMC_RC */ + u32 rfc; /* 0x30: EMC_RFC */ + u32 ras; /* 0x34: EMC_RAS */ + u32 rp; /* 0x38: EMC_RP */ + u32 r2w; /* 0x3C: EMC_R2W */ + u32 w2r; /* 0x40: EMC_W2R */ + u32 r2p; /* 0x44: EMC_R2P */ + u32 w2p; /* 0x48: EMC_W2P */ + u32 rd_rcd; /* 0x4C: EMC_RD_RCD */ + u32 wd_rcd; /* 0x50: EMC_WD_RCD */ + u32 rrd; /* 0x54: EMC_RRD */ + u32 rext; /* 0x58: EMC_REXT */ + u32 wdv; /* 0x5C: EMC_WDV */ + u32 quse; /* 0x60: EMC_QUSE */ + u32 qrst; /* 0x64: EMC_QRST */ + u32 qsafe; /* 0x68: EMC_QSAFE */ + u32 rdv; /* 0x6C: EMC_RDV */ + u32 refresh; /* 0x70: EMC_REFRESH */ + u32 burst_refresh_num; /* 0x74: EMC_BURST_REFRESH_NUM */ + u32 pdex2wr; /* 0x78: EMC_PDEX2WR */ + u32 pdex2rd; /* 0x7c: EMC_PDEX2RD */ + u32 pchg2pden; /* 0x80: EMC_PCHG2PDEN */ + u32 act2pden; /* 0x84: EMC_ACT2PDEN */ + u32 ar2pden; /* 0x88: EMC_AR2PDEN */ + u32 rw2pden; /* 0x8C: EMC_RW2PDEN */ + u32 txsr; /* 0x90: EMC_TXSR */ + u32 tcke; /* 0x94: EMC_TCKE */ + u32 tfaw; /* 0x98: EMC_TFAW */ + u32 trpab; /* 0x9C: EMC_TRPAB */ + u32 tclkstable; /* 0xA0: EMC_TCLKSTABLE */ + u32 tclkstop; /* 0xA4: EMC_TCLKSTOP */ + u32 trefbw; /* 0xA8: EMC_TREFBW */ + u32 quse_extra; /* 0xAC: EMC_QUSE_EXTRA */ + u32 odt_write; /* 0xB0: EMC_ODT_WRITE */ + u32 odt_read; /* 0xB4: EMC_ODT_READ */ + u32 reserved2[5]; /* 0xB8 ~ 0xC8 */ + u32 mrs; /* 0xCC: EMC_MRS */ + u32 emrs; /* 0xD0: EMC_EMRS */ + u32 ref; /* 0xD4: EMC_REF */ + u32 pre; /* 0xD8: EMC_PRE */ + u32 nop; /* 0xDC: EMC_NOP */ + u32 self_ref; /* 0xE0: EMC_SELF_REF */ + u32 dpd; /* 0xE4: EMC_DPD */ + u32 mrw; /* 0xE8: EMC_MRW */ + u32 mrr; /* 0xEC: EMC_MRR */ + u32 reserved3; /* 0xF0: */ + u32 fbio_cfg1; /* 0xF4: EMC_FBIO_CFG1 */ + u32 fbio_dqsib_dly; /* 0xF8: EMC_FBIO_DQSIB_DLY */ + u32 fbio_dqsib_dly_msb; /* 0xFC: EMC_FBIO_DQSIB_DLY_MSG */ + u32 fbio_spare; /* 0x100: SBIO_SPARE */ + /* There are more registers ... */ +}; + +/** + * Set up the EMC for the given rate. The timing parameters are retrieved + * from the device tree "nvidia,tegra20-emc" node and its + * "nvidia,tegra20-emc-table" sub-nodes. + * + * @param blob Device tree blob + * @param rate Clock speed of memory controller in Hz (=2x memory bus rate) + * @return 0 if ok, else -ve error code (look in emc.c to decode it) + */ +int tegra_set_emc(const void *blob, unsigned rate); + +/** + * Get a pointer to the EMC controller from the device tree. + * + * @param blob Device tree blob + * @return pointer to EMC controller + */ +struct emc_ctlr *emc_get_controller(const void *blob); + +#endif diff --git a/arch/arm/include/asm/arch-tegra20/flow.h b/arch/arm/include/asm/arch-tegra20/flow.h new file mode 100644 index 0000000..cce6cbf --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/flow.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2010, 2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _FLOW_H_ +#define _FLOW_H_ + +struct flow_ctlr { + u32 halt_cpu_events; + u32 halt_cop_events; + u32 cpu_csr; + u32 cop_csr; + u32 halt_cpu1_events; + u32 cpu1_csr; +}; + +#endif diff --git a/arch/arm/include/asm/arch-tegra20/funcmux.h b/arch/arm/include/asm/arch-tegra20/funcmux.h new file mode 100644 index 0000000..258f7b6 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/funcmux.h @@ -0,0 +1,79 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Tegra20 high-level function multiplexing */ + +#ifndef __FUNCMUX_H +#define __FUNCMUX_H + +/* Configs supported by the func mux */ +enum { + FUNCMUX_DEFAULT = 0, /* default config */ + + /* UART configs */ + FUNCMUX_UART1_IRRX_IRTX = 0, + FUNCMUX_UART1_UAA_UAB, + FUNCMUX_UART1_GPU, + FUNCMUX_UART1_SDIO1, + FUNCMUX_UART2_IRDA = 0, + FUNCMUX_UART4_GMC = 0, + + /* I2C configs */ + FUNCMUX_DVC_I2CP = 0, + FUNCMUX_I2C1_RM = 0, + FUNCMUX_I2C2_DDC = 0, + FUNCMUX_I2C2_PTA, + FUNCMUX_I2C3_DTF = 0, + + /* SDMMC configs */ + FUNCMUX_SDMMC1_SDIO1_4BIT = 0, + FUNCMUX_SDMMC2_DTA_DTD_8BIT = 0, + FUNCMUX_SDMMC3_SDB_4BIT = 0, + FUNCMUX_SDMMC3_SDB_SLXA_8BIT, + FUNCMUX_SDMMC4_ATC_ATD_8BIT = 0, + FUNCMUX_SDMMC4_ATB_GMA_4_BIT, + FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT, + + /* USB configs */ + FUNCMUX_USB2_ULPI = 0, + + /* Serial Flash configs */ + FUNCMUX_SPI1_GMC_GMD = 0, +}; + +/** + * Select a config for a particular peripheral. + * + * Each peripheral can operate through a number of configurations, + * which are sets of pins that it uses to bring out its signals. + * The basic config is 0, and higher numbers indicate different + * pinmux settings to bring the peripheral out on other pins, + * + * This function also disables tristate for the function's pins, + * so that they operate in normal mode. + * + * @param id Peripheral id + * @param config Configuration to use (FUNCMUX_...), 0 for default + * @return 0 if ok, -1 on error (e.g. incorrect id or config) + */ +int funcmux_select(enum periph_id id, int config); + +#endif diff --git a/arch/arm/include/asm/arch-tegra20/fuse.h b/arch/arm/include/asm/arch-tegra20/fuse.h new file mode 100644 index 0000000..b7e3808 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/fuse.h @@ -0,0 +1,39 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _FUSE_H_ +#define _FUSE_H_ + +/* FUSE registers */ +struct fuse_regs { + u32 reserved0[64]; /* 0x00 - 0xFC: */ + u32 production_mode; /* 0x100: FUSE_PRODUCTION_MODE */ + u32 reserved1[3]; /* 0x104 - 0x10c: */ + u32 sku_info; /* 0x110 */ + u32 reserved2[13]; /* 0x114 - 0x144: */ + u32 fa; /* 0x148: FUSE_FA */ + u32 reserved3[21]; /* 0x14C - 0x19C: */ + u32 security_mode; /* 0x1A0: FUSE_SECURITY_MODE */ +}; + +#endif /* ifndef _FUSE_H_ */ diff --git a/arch/arm/include/asm/arch-tegra20/gp_padctrl.h b/arch/arm/include/asm/arch-tegra20/gp_padctrl.h new file mode 100644 index 0000000..865af5b --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/gp_padctrl.h @@ -0,0 +1,73 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _GP_PADCTRL_H_ +#define _GP_PADCTRL_H_ + +/* APB_MISC_GP and padctrl registers */ +struct apb_misc_gp_ctlr { + u32 modereg; /* 0x00: APB_MISC_GP_MODEREG */ + u32 hidrev; /* 0x04: APB_MISC_GP_HIDREV */ + u32 reserved0[22]; /* 0x08 - 0x5C: */ + u32 emu_revid; /* 0x60: APB_MISC_GP_EMU_REVID */ + u32 xactor_scratch; /* 0x64: APB_MISC_GP_XACTOR_SCRATCH */ + u32 aocfg1; /* 0x68: APB_MISC_GP_AOCFG1PADCTRL */ + u32 aocfg2; /* 0x6c: APB_MISC_GP_AOCFG2PADCTRL */ + u32 atcfg1; /* 0x70: APB_MISC_GP_ATCFG1PADCTRL */ + u32 atcfg2; /* 0x74: APB_MISC_GP_ATCFG2PADCTRL */ + u32 cdevcfg1; /* 0x78: APB_MISC_GP_CDEV1CFGPADCTRL */ + u32 cdevcfg2; /* 0x7C: APB_MISC_GP_CDEV2CFGPADCTRL */ + u32 csuscfg; /* 0x80: APB_MISC_GP_CSUSCFGPADCTRL */ + u32 dap1cfg; /* 0x84: APB_MISC_GP_DAP1CFGPADCTRL */ + u32 dap2cfg; /* 0x88: APB_MISC_GP_DAP2CFGPADCTRL */ + u32 dap3cfg; /* 0x8C: APB_MISC_GP_DAP3CFGPADCTRL */ + u32 dap4cfg; /* 0x90: APB_MISC_GP_DAP4CFGPADCTRL */ + u32 dbgcfg; /* 0x94: APB_MISC_GP_DBGCFGPADCTRL */ + u32 lcdcfg1; /* 0x98: APB_MISC_GP_LCDCFG1PADCTRL */ + u32 lcdcfg2; /* 0x9C: APB_MISC_GP_LCDCFG2PADCTRL */ + u32 sdmmc2_cfg; /* 0xA0: APB_MISC_GP_SDMMC2CFGPADCTRL */ + u32 sdmmc3_cfg; /* 0xA4: APB_MISC_GP_SDMMC3CFGPADCTRL */ + u32 spicfg; /* 0xA8: APB_MISC_GP_SPICFGPADCTRL */ + u32 uaacfg; /* 0xAC: APB_MISC_GP_UAACFGPADCTRL */ + u32 uabcfg; /* 0xB0: APB_MISC_GP_UABCFGPADCTRL */ + u32 uart2cfg; /* 0xB4: APB_MISC_GP_UART2CFGPADCTRL */ + u32 uart3cfg; /* 0xB8: APB_MISC_GP_UART3CFGPADCTRL */ + u32 vicfg1; /* 0xBC: APB_MISC_GP_VICFG1PADCTRL */ + u32 vicfg2; /* 0xC0: APB_MISC_GP_VICFG2PADCTRL */ + u32 xm2cfga; /* 0xC4: APB_MISC_GP_XM2CFGAPADCTRL */ + u32 xm2cfgc; /* 0xC8: APB_MISC_GP_XM2CFGCPADCTRL */ + u32 xm2cfgd; /* 0xCC: APB_MISC_GP_XM2CFGDPADCTRL */ + u32 xm2clkcfg; /* 0xD0: APB_MISC_GP_XM2CLKCFGPADCTRL */ + u32 memcomp; /* 0xD4: APB_MISC_GP_MEMCOMPPADCTRL */ +}; + +/* bit fields definitions for APB_MISC_GP_HIDREV register */ +#define HIDREV_CHIPID_SHIFT 8 +#define HIDREV_CHIPID_MASK (0xff << HIDREV_CHIPID_SHIFT) +#define HIDREV_MAJORPREV_SHIFT 4 +#define HIDREV_MAJORPREV_MASK (0xf << HIDREV_MAJORPREV_SHIFT) + +/* CHIPID field returned from APB_MISC_GP_HIDREV register */ +#define CHIPID_TEGRA20 0x20 + +#endif diff --git a/arch/arm/include/asm/arch-tegra20/gpio.h b/arch/arm/include/asm/arch-tegra20/gpio.h new file mode 100644 index 0000000..06be4c2 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/gpio.h @@ -0,0 +1,290 @@ +/* + * Copyright (c) 2011, Google Inc. All rights reserved. + * See file CREDITS for list of people who contributed to this + * project. + * Portions Copyright 2011-2012 NVIDIA Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _TEGRA_GPIO_H_ +#define _TEGRA_GPIO_H_ + +/* + * The Tegra 2x GPIO controller has 224 GPIOs arranged in 7 banks of 4 ports, + * each with 8 GPIOs. + */ +#define TEGRA_GPIO_PORTS 4 /* number of ports per bank */ +#define TEGRA_GPIO_BANKS 7 /* number of banks */ +#define MAX_NUM_GPIOS (TEGRA_GPIO_PORTS * TEGRA_GPIO_BANKS * 8) +#define GPIO_NAME_SIZE 20 /* gpio_request max label len */ + +/* GPIO Controller registers for a single bank */ +struct gpio_ctlr_bank { + uint gpio_config[TEGRA_GPIO_PORTS]; + uint gpio_dir_out[TEGRA_GPIO_PORTS]; + uint gpio_out[TEGRA_GPIO_PORTS]; + uint gpio_in[TEGRA_GPIO_PORTS]; + uint gpio_int_status[TEGRA_GPIO_PORTS]; + uint gpio_int_enable[TEGRA_GPIO_PORTS]; + uint gpio_int_level[TEGRA_GPIO_PORTS]; + uint gpio_int_clear[TEGRA_GPIO_PORTS]; +}; + +struct gpio_ctlr { + struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS]; +}; + +#define GPIO_BANK(x) ((x) >> 5) +#define GPIO_PORT(x) (((x) >> 3) & 0x3) +#define GPIO_FULLPORT(x) ((x) >> 3) +#define GPIO_BIT(x) ((x) & 0x7) + +enum gpio_pin { + GPIO_PA0 = 0, /* pin 0 */ + GPIO_PA1, + GPIO_PA2, + GPIO_PA3, + GPIO_PA4, + GPIO_PA5, + GPIO_PA6, + GPIO_PA7, + GPIO_PB0, /* pin 8 */ + GPIO_PB1, + GPIO_PB2, + GPIO_PB3, + GPIO_PB4, + GPIO_PB5, + GPIO_PB6, + GPIO_PB7, + GPIO_PC0, /* pin 16 */ + GPIO_PC1, + GPIO_PC2, + GPIO_PC3, + GPIO_PC4, + GPIO_PC5, + GPIO_PC6, + GPIO_PC7, + GPIO_PD0, /* pin 24 */ + GPIO_PD1, + GPIO_PD2, + GPIO_PD3, + GPIO_PD4, + GPIO_PD5, + GPIO_PD6, + GPIO_PD7, + GPIO_PE0, /* pin 32 */ + GPIO_PE1, + GPIO_PE2, + GPIO_PE3, + GPIO_PE4, + GPIO_PE5, + GPIO_PE6, + GPIO_PE7, + GPIO_PF0, /* pin 40 */ + GPIO_PF1, + GPIO_PF2, + GPIO_PF3, + GPIO_PF4, + GPIO_PF5, + GPIO_PF6, + GPIO_PF7, + GPIO_PG0, /* pin 48 */ + GPIO_PG1, + GPIO_PG2, + GPIO_PG3, + GPIO_PG4, + GPIO_PG5, + GPIO_PG6, + GPIO_PG7, + GPIO_PH0, /* pin 56 */ + GPIO_PH1, + GPIO_PH2, + GPIO_PH3, + GPIO_PH4, + GPIO_PH5, + GPIO_PH6, + GPIO_PH7, + GPIO_PI0, /* pin 64 */ + GPIO_PI1, + GPIO_PI2, + GPIO_PI3, + GPIO_PI4, + GPIO_PI5, + GPIO_PI6, + GPIO_PI7, + GPIO_PJ0, /* pin 72 */ + GPIO_PJ1, + GPIO_PJ2, + GPIO_PJ3, + GPIO_PJ4, + GPIO_PJ5, + GPIO_PJ6, + GPIO_PJ7, + GPIO_PK0, /* pin 80 */ + GPIO_PK1, + GPIO_PK2, + GPIO_PK3, + GPIO_PK4, + GPIO_PK5, + GPIO_PK6, + GPIO_PK7, + GPIO_PL0, /* pin 88 */ + GPIO_PL1, + GPIO_PL2, + GPIO_PL3, + GPIO_PL4, + GPIO_PL5, + GPIO_PL6, + GPIO_PL7, + GPIO_PM0, /* pin 96 */ + GPIO_PM1, + GPIO_PM2, + GPIO_PM3, + GPIO_PM4, + GPIO_PM5, + GPIO_PM6, + GPIO_PM7, + GPIO_PN0, /* pin 104 */ + GPIO_PN1, + GPIO_PN2, + GPIO_PN3, + GPIO_PN4, + GPIO_PN5, + GPIO_PN6, + GPIO_PN7, + GPIO_PO0, /* pin 112 */ + GPIO_PO1, + GPIO_PO2, + GPIO_PO3, + GPIO_PO4, + GPIO_PO5, + GPIO_PO6, + GPIO_PO7, + GPIO_PP0, /* pin 120 */ + GPIO_PP1, + GPIO_PP2, + GPIO_PP3, + GPIO_PP4, + GPIO_PP5, + GPIO_PP6, + GPIO_PP7, + GPIO_PQ0, /* pin 128 */ + GPIO_PQ1, + GPIO_PQ2, + GPIO_PQ3, + GPIO_PQ4, + GPIO_PQ5, + GPIO_PQ6, + GPIO_PQ7, + GPIO_PR0, /* pin 136 */ + GPIO_PR1, + GPIO_PR2, + GPIO_PR3, + GPIO_PR4, + GPIO_PR5, + GPIO_PR6, + GPIO_PR7, + GPIO_PS0, /* pin 144 */ + GPIO_PS1, + GPIO_PS2, + GPIO_PS3, + GPIO_PS4, + GPIO_PS5, + GPIO_PS6, + GPIO_PS7, + GPIO_PT0, /* pin 152 */ + GPIO_PT1, + GPIO_PT2, + GPIO_PT3, + GPIO_PT4, + GPIO_PT5, + GPIO_PT6, + GPIO_PT7, + GPIO_PU0, /* pin 160 */ + GPIO_PU1, + GPIO_PU2, + GPIO_PU3, + GPIO_PU4, + GPIO_PU5, + GPIO_PU6, + GPIO_PU7, + GPIO_PV0, /* pin 168 */ + GPIO_PV1, + GPIO_PV2, + GPIO_PV3, + GPIO_PV4, + GPIO_PV5, + GPIO_PV6, + GPIO_PV7, + GPIO_PW0, /* pin 176 */ + GPIO_PW1, + GPIO_PW2, + GPIO_PW3, + GPIO_PW4, + GPIO_PW5, + GPIO_PW6, + GPIO_PW7, + GPIO_PX0, /* pin 184 */ + GPIO_PX1, + GPIO_PX2, + GPIO_PX3, + GPIO_PX4, + GPIO_PX5, + GPIO_PX6, + GPIO_PX7, + GPIO_PY0, /* pin 192 */ + GPIO_PY1, + GPIO_PY2, + GPIO_PY3, + GPIO_PY4, + GPIO_PY5, + GPIO_PY6, + GPIO_PY7, + GPIO_PZ0, /* pin 200 */ + GPIO_PZ1, + GPIO_PZ2, + GPIO_PZ3, + GPIO_PZ4, + GPIO_PZ5, + GPIO_PZ6, + GPIO_PZ7, + GPIO_PAA0, /* pin 208 */ + GPIO_PAA1, + GPIO_PAA2, + GPIO_PAA3, + GPIO_PAA4, + GPIO_PAA5, + GPIO_PAA6, + GPIO_PAA7, + GPIO_PBB0, /* pin 216 */ + GPIO_PBB1, + GPIO_PBB2, + GPIO_PBB3, + GPIO_PBB4, + GPIO_PBB5, + GPIO_PBB6, + GPIO_PBB7, /* pin 223 */ +}; + +/* + * Tegra20-specific GPIO API + */ + +void gpio_info(void); + +#define gpio_status() gpio_info() +#endif /* TEGRA_GPIO_H_ */ diff --git a/arch/arm/include/asm/arch-tegra20/hardware.h b/arch/arm/include/asm/arch-tegra20/hardware.h new file mode 100644 index 0000000..8c47578 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/hardware.h @@ -0,0 +1,29 @@ +/* +* (C) Copyright 2010-2011 +* NVIDIA Corporation <www.nvidia.com> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __TEGRA2_HW_H +#define __TEGRA2_HW_H + +/* include tegra specific hardware definitions */ + +#endif /* __TEGRA2_HW_H */ diff --git a/arch/arm/include/asm/arch-tegra20/mmc.h b/arch/arm/include/asm/arch-tegra20/mmc.h new file mode 100644 index 0000000..916a353 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/mmc.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2011, Google Inc. All rights reserved. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _TEGRA20_MMC_H_ +#define _TEGRA20_MMC_H_ + +int tegra20_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio); + +#endif /* TEGRA20_MMC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra20/pinmux.h b/arch/arm/include/asm/arch-tegra20/pinmux.h new file mode 100644 index 0000000..03fa7ca --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/pinmux.h @@ -0,0 +1,354 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _PINMUX_H_ +#define _PINMUX_H_ + +/* + * Pin groups which we adjust. There are three basic attributes of each pin + * group which use this enum: + * + * - function + * - pullup / pulldown + * - tristate or normal + */ +enum pmux_pingrp { + /* APB_MISC_PP_TRISTATE_REG_A_0 */ + PINGRP_ATA, + PINGRP_ATB, + PINGRP_ATC, + PINGRP_ATD, + PINGRP_CDEV1, + PINGRP_CDEV2, + PINGRP_CSUS, + PINGRP_DAP1, + + PINGRP_DAP2, + PINGRP_DAP3, + PINGRP_DAP4, + PINGRP_DTA, + PINGRP_DTB, + PINGRP_DTC, + PINGRP_DTD, + PINGRP_DTE, + + PINGRP_GPU, + PINGRP_GPV, + PINGRP_I2CP, + PINGRP_IRTX, + PINGRP_IRRX, + PINGRP_KBCB, + PINGRP_KBCA, + PINGRP_PMC, + + PINGRP_PTA, + PINGRP_RM, + PINGRP_KBCE, + PINGRP_KBCF, + PINGRP_GMA, + PINGRP_GMC, + PINGRP_SDIO1, + PINGRP_OWC, + + /* 32: APB_MISC_PP_TRISTATE_REG_B_0 */ + PINGRP_GME, + PINGRP_SDC, + PINGRP_SDD, + PINGRP_RESERVED0, + PINGRP_SLXA, + PINGRP_SLXC, + PINGRP_SLXD, + PINGRP_SLXK, + + PINGRP_SPDI, + PINGRP_SPDO, + PINGRP_SPIA, + PINGRP_SPIB, + PINGRP_SPIC, + PINGRP_SPID, + PINGRP_SPIE, + PINGRP_SPIF, + + PINGRP_SPIG, + PINGRP_SPIH, + PINGRP_UAA, + PINGRP_UAB, + PINGRP_UAC, + PINGRP_UAD, + PINGRP_UCA, + PINGRP_UCB, + + PINGRP_RESERVED1, + PINGRP_ATE, + PINGRP_KBCC, + PINGRP_RESERVED2, + PINGRP_RESERVED3, + PINGRP_GMB, + PINGRP_GMD, + PINGRP_DDC, + + /* 64: APB_MISC_PP_TRISTATE_REG_C_0 */ + PINGRP_LD0, + PINGRP_LD1, + PINGRP_LD2, + PINGRP_LD3, + PINGRP_LD4, + PINGRP_LD5, + PINGRP_LD6, + PINGRP_LD7, + + PINGRP_LD8, + PINGRP_LD9, + PINGRP_LD10, + PINGRP_LD11, + PINGRP_LD12, + PINGRP_LD13, + PINGRP_LD14, + PINGRP_LD15, + + PINGRP_LD16, + PINGRP_LD17, + PINGRP_LHP0, + PINGRP_LHP1, + PINGRP_LHP2, + PINGRP_LVP0, + PINGRP_LVP1, + PINGRP_HDINT, + + PINGRP_LM0, + PINGRP_LM1, + PINGRP_LVS, + PINGRP_LSC0, + PINGRP_LSC1, + PINGRP_LSCK, + PINGRP_LDC, + PINGRP_LCSN, + + /* 96: APB_MISC_PP_TRISTATE_REG_D_0 */ + PINGRP_LSPI, + PINGRP_LSDA, + PINGRP_LSDI, + PINGRP_LPW0, + PINGRP_LPW1, + PINGRP_LPW2, + PINGRP_LDI, + PINGRP_LHS, + + PINGRP_LPP, + PINGRP_RESERVED4, + PINGRP_KBCD, + PINGRP_GPU7, + PINGRP_DTF, + PINGRP_UDA, + PINGRP_CRTP, + PINGRP_SDB, + + /* these pin groups only have pullup and pull down control */ + PINGRP_FIRST_NO_MUX, + PINGRP_CK32 = PINGRP_FIRST_NO_MUX, + PINGRP_DDRC, + PINGRP_PMCA, + PINGRP_PMCB, + PINGRP_PMCC, + PINGRP_PMCD, + PINGRP_PMCE, + PINGRP_XM2C, + PINGRP_XM2D, + + PINGRP_COUNT, +}; + +/* + * Functions which can be assigned to each of the pin groups. The values here + * bear no relation to the values programmed into pinmux registers and are + * purely a convenience. The translation is done through a table search. + */ +enum pmux_func { + PMUX_FUNC_AHB_CLK, + PMUX_FUNC_APB_CLK, + PMUX_FUNC_AUDIO_SYNC, + PMUX_FUNC_CRT, + PMUX_FUNC_DAP1, + PMUX_FUNC_DAP2, + PMUX_FUNC_DAP3, + PMUX_FUNC_DAP4, + PMUX_FUNC_DAP5, + PMUX_FUNC_DISPA, + PMUX_FUNC_DISPB, + PMUX_FUNC_EMC_TEST0_DLL, + PMUX_FUNC_EMC_TEST1_DLL, + PMUX_FUNC_GMI, + PMUX_FUNC_GMI_INT, + PMUX_FUNC_HDMI, + PMUX_FUNC_I2C, + PMUX_FUNC_I2C2, + PMUX_FUNC_I2C3, + PMUX_FUNC_IDE, + PMUX_FUNC_IRDA, + PMUX_FUNC_KBC, + PMUX_FUNC_MIO, + PMUX_FUNC_MIPI_HS, + PMUX_FUNC_NAND, + PMUX_FUNC_OSC, + PMUX_FUNC_OWR, + PMUX_FUNC_PCIE, + PMUX_FUNC_PLLA_OUT, + PMUX_FUNC_PLLC_OUT1, + PMUX_FUNC_PLLM_OUT1, + PMUX_FUNC_PLLP_OUT2, + PMUX_FUNC_PLLP_OUT3, + PMUX_FUNC_PLLP_OUT4, + PMUX_FUNC_PWM, + PMUX_FUNC_PWR_INTR, + PMUX_FUNC_PWR_ON, + PMUX_FUNC_RTCK, + PMUX_FUNC_SDIO1, + PMUX_FUNC_SDIO2, + PMUX_FUNC_SDIO3, + PMUX_FUNC_SDIO4, + PMUX_FUNC_SFLASH, + PMUX_FUNC_SPDIF, + PMUX_FUNC_SPI1, + PMUX_FUNC_SPI2, + PMUX_FUNC_SPI2_ALT, + PMUX_FUNC_SPI3, + PMUX_FUNC_SPI4, + PMUX_FUNC_TRACE, + PMUX_FUNC_TWC, + PMUX_FUNC_UARTA, + PMUX_FUNC_UARTB, + PMUX_FUNC_UARTC, + PMUX_FUNC_UARTD, + PMUX_FUNC_UARTE, + PMUX_FUNC_ULPI, + PMUX_FUNC_VI, + PMUX_FUNC_VI_SENSOR_CLK, + PMUX_FUNC_XIO, + PMUX_FUNC_SAFE, + + /* These don't have a name, but can be used in the table */ + PMUX_FUNC_RSVD1, + PMUX_FUNC_RSVD2, + PMUX_FUNC_RSVD3, + PMUX_FUNC_RSVD4, + PMUX_FUNC_RSVD, /* Not valid and should not be used */ + + PMUX_FUNC_COUNT, + + PMUX_FUNC_NONE = -1, +}; + +/* return 1 if a pmux_func is in range */ +#define pmux_func_isvalid(func) ((func) >= 0 && (func) < PMUX_FUNC_COUNT && \ + (func) != PMUX_FUNC_RSVD) + +/* The pullup/pulldown state of a pin group */ +enum pmux_pull { + PMUX_PULL_NORMAL = 0, + PMUX_PULL_DOWN, + PMUX_PULL_UP, +}; + +/* Defines whether a pin group is tristated or in normal operation */ +enum pmux_tristate { + PMUX_TRI_NORMAL = 0, + PMUX_TRI_TRISTATE = 1, +}; + +/* Available power domains used by pin groups */ +enum pmux_vddio { + PMUX_VDDIO_BB = 0, + PMUX_VDDIO_LCD, + PMUX_VDDIO_VI, + PMUX_VDDIO_UART, + PMUX_VDDIO_DDR, + PMUX_VDDIO_NAND, + PMUX_VDDIO_SYS, + PMUX_VDDIO_AUDIO, + PMUX_VDDIO_SD, + + PMUX_VDDIO_NONE +}; + +enum { + PMUX_TRISTATE_REGS = 4, + PMUX_MUX_REGS = 7, + PMUX_PULL_REGS = 5, +}; + +/* APB MISC Pin Mux and Tristate (APB_MISC_PP_) registers */ +struct pmux_tri_ctlr { + uint pmt_reserved0; /* ABP_MISC_PP_ reserved offset 00 */ + uint pmt_reserved1; /* ABP_MISC_PP_ reserved offset 04 */ + uint pmt_strap_opt_a; /* _STRAPPING_OPT_A_0, offset 08 */ + uint pmt_reserved2; /* ABP_MISC_PP_ reserved offset 0C */ + uint pmt_reserved3; /* ABP_MISC_PP_ reserved offset 10 */ + uint pmt_tri[PMUX_TRISTATE_REGS];/* _TRI_STATE_REG_A/B/C/D_0 14-20 */ + uint pmt_cfg_ctl; /* _CONFIG_CTL_0, offset 24 */ + + uint pmt_reserved[22]; /* ABP_MISC_PP_ reserved offs 28-7C */ + + uint pmt_ctl[PMUX_MUX_REGS]; /* _PIN_MUX_CTL_A-G_0, offset 80 */ + uint pmt_reserved4; /* ABP_MISC_PP_ reserved offset 9c */ + uint pmt_pull[PMUX_PULL_REGS]; /* APB_MISC_PP_PULLUPDOWN_REG_A-E */ +}; + +/* + * This defines the configuration for a pin, including the function assigned, + * pull up/down settings and tristate settings. Having set up one of these + * you can call pinmux_config_pingroup() to configure a pin in one step. Also + * available is pinmux_config_table() to configure a list of pins. + */ +struct pingroup_config { + enum pmux_pingrp pingroup; /* pin group PINGRP_... */ + enum pmux_func func; /* function to assign FUNC_... */ + enum pmux_pull pull; /* pull up/down/normal PMUX_PULL_...*/ + enum pmux_tristate tristate; /* tristate or normal PMUX_TRI_... */ +}; + +/* Set a pin group to tristate */ +void pinmux_tristate_enable(enum pmux_pingrp pin); + +/* Set a pin group to normal (non tristate) */ +void pinmux_tristate_disable(enum pmux_pingrp pin); + +/* Set the pull up/down feature for a pin group */ +void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd); + +/* Set the mux function for a pin group */ +void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func); + +/* Set the complete configuration for a pin group */ +void pinmux_config_pingroup(struct pingroup_config *config); + +void pinmux_set_tristate(enum pmux_pingrp pin, int enable); + +/** + * Configuure a list of pin groups + * + * @param config List of config items + * @param len Number of config items in list + */ +void pinmux_config_table(struct pingroup_config *config, int len); + +#endif /* PINMUX_H */ diff --git a/arch/arm/include/asm/arch-tegra20/pmc.h b/arch/arm/include/asm/arch-tegra20/pmc.h new file mode 100644 index 0000000..b1d47cd --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/pmc.h @@ -0,0 +1,132 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _PMC_H_ +#define _PMC_H_ + +/* Power Management Controller (APBDEV_PMC_) registers */ +struct pmc_ctlr { + uint pmc_cntrl; /* _CNTRL_0, offset 00 */ + uint pmc_sec_disable; /* _SEC_DISABLE_0, offset 04 */ + uint pmc_pmc_swrst; /* _PMC_SWRST_0, offset 08 */ + uint pmc_wake_mask; /* _WAKE_MASK_0, offset 0C */ + uint pmc_wake_lvl; /* _WAKE_LVL_0, offset 10 */ + uint pmc_wake_status; /* _WAKE_STATUS_0, offset 14 */ + uint pmc_sw_wake_status; /* _SW_WAKE_STATUS_0, offset 18 */ + uint pmc_dpd_pads_oride; /* _DPD_PADS_ORIDE_0, offset 1C */ + uint pmc_dpd_sample; /* _DPD_PADS_SAMPLE_0, offset 20 */ + uint pmc_dpd_enable; /* _DPD_PADS_ENABLE_0, offset 24 */ + uint pmc_pwrgate_timer_off; /* _PWRGATE_TIMER_OFF_0, offset 28 */ + uint pmc_pwrgate_timer_on; /* _PWRGATE_TIMER_ON_0, offset 2C */ + uint pmc_pwrgate_toggle; /* _PWRGATE_TOGGLE_0, offset 30 */ + uint pmc_remove_clamping; /* _REMOVE_CLAMPING_CMD_0, offset 34 */ + uint pmc_pwrgate_status; /* _PWRGATE_STATUS_0, offset 38 */ + uint pmc_pwrgood_timer; /* _PWRGOOD_TIMER_0, offset 3C */ + uint pmc_blink_timer; /* _BLINK_TIMER_0, offset 40 */ + uint pmc_no_iopower; /* _NO_IOPOWER_0, offset 44 */ + uint pmc_pwr_det; /* _PWR_DET_0, offset 48 */ + uint pmc_pwr_det_latch; /* _PWR_DET_LATCH_0, offset 4C */ + + uint pmc_scratch0; /* _SCRATCH0_0, offset 50 */ + uint pmc_scratch1; /* _SCRATCH1_0, offset 54 */ + uint pmc_scratch2; /* _SCRATCH2_0, offset 58 */ + uint pmc_scratch3; /* _SCRATCH3_0, offset 5C */ + uint pmc_scratch4; /* _SCRATCH4_0, offset 60 */ + uint pmc_scratch5; /* _SCRATCH5_0, offset 64 */ + uint pmc_scratch6; /* _SCRATCH6_0, offset 68 */ + uint pmc_scratch7; /* _SCRATCH7_0, offset 6C */ + uint pmc_scratch8; /* _SCRATCH8_0, offset 70 */ + uint pmc_scratch9; /* _SCRATCH9_0, offset 74 */ + uint pmc_scratch10; /* _SCRATCH10_0, offset 78 */ + uint pmc_scratch11; /* _SCRATCH11_0, offset 7C */ + uint pmc_scratch12; /* _SCRATCH12_0, offset 80 */ + uint pmc_scratch13; /* _SCRATCH13_0, offset 84 */ + uint pmc_scratch14; /* _SCRATCH14_0, offset 88 */ + uint pmc_scratch15; /* _SCRATCH15_0, offset 8C */ + uint pmc_scratch16; /* _SCRATCH16_0, offset 90 */ + uint pmc_scratch17; /* _SCRATCH17_0, offset 94 */ + uint pmc_scratch18; /* _SCRATCH18_0, offset 98 */ + uint pmc_scratch19; /* _SCRATCH19_0, offset 9C */ + uint pmc_scratch20; /* _SCRATCH20_0, offset A0 */ + uint pmc_scratch21; /* _SCRATCH21_0, offset A4 */ + uint pmc_scratch22; /* _SCRATCH22_0, offset A8 */ + uint pmc_scratch23; /* _SCRATCH23_0, offset AC */ + + uint pmc_secure_scratch0; /* _SECURE_SCRATCH0_0, offset B0 */ + uint pmc_secure_scratch1; /* _SECURE_SCRATCH1_0, offset B4 */ + uint pmc_secure_scratch2; /* _SECURE_SCRATCH2_0, offset B8 */ + uint pmc_secure_scratch3; /* _SECURE_SCRATCH3_0, offset BC */ + uint pmc_secure_scratch4; /* _SECURE_SCRATCH4_0, offset C0 */ + uint pmc_secure_scratch5; /* _SECURE_SCRATCH5_0, offset C4 */ + + uint pmc_cpupwrgood_timer; /* _CPUPWRGOOD_TIMER_0, offset C8 */ + uint pmc_cpupwroff_timer; /* _CPUPWROFF_TIMER_0, offset CC */ + uint pmc_pg_mask; /* _PG_MASK_0, offset D0 */ + uint pmc_pg_mask_1; /* _PG_MASK_1_0, offset D4 */ + uint pmc_auto_wake_lvl; /* _AUTO_WAKE_LVL_0, offset D8 */ + uint pmc_auto_wake_lvl_mask; /* _AUTO_WAKE_LVL_MASK_0, offset DC */ + uint pmc_wake_delay; /* _WAKE_DELAY_0, offset E0 */ + uint pmc_pwr_det_val; /* _PWR_DET_VAL_0, offset E4 */ + uint pmc_ddr_pwr; /* _DDR_PWR_0, offset E8 */ + uint pmc_usb_debounce_del; /* _USB_DEBOUNCE_DEL_0, offset EC */ + uint pmc_usb_ao; /* _USB_AO_0, offset F0 */ + uint pmc_crypto_op; /* _CRYPTO_OP__0, offset F4 */ + uint pmc_pllp_wb0_override; /* _PLLP_WB0_OVERRIDE_0, offset F8 */ + + uint pmc_scratch24; /* _SCRATCH24_0, offset FC */ + uint pmc_scratch25; /* _SCRATCH24_0, offset 100 */ + uint pmc_scratch26; /* _SCRATCH24_0, offset 104 */ + uint pmc_scratch27; /* _SCRATCH24_0, offset 108 */ + uint pmc_scratch28; /* _SCRATCH24_0, offset 10C */ + uint pmc_scratch29; /* _SCRATCH24_0, offset 110 */ + uint pmc_scratch30; /* _SCRATCH24_0, offset 114 */ + uint pmc_scratch31; /* _SCRATCH24_0, offset 118 */ + uint pmc_scratch32; /* _SCRATCH24_0, offset 11C */ + uint pmc_scratch33; /* _SCRATCH24_0, offset 120 */ + uint pmc_scratch34; /* _SCRATCH24_0, offset 124 */ + uint pmc_scratch35; /* _SCRATCH24_0, offset 128 */ + uint pmc_scratch36; /* _SCRATCH24_0, offset 12C */ + uint pmc_scratch37; /* _SCRATCH24_0, offset 130 */ + uint pmc_scratch38; /* _SCRATCH24_0, offset 134 */ + uint pmc_scratch39; /* _SCRATCH24_0, offset 138 */ + uint pmc_scratch40; /* _SCRATCH24_0, offset 13C */ + uint pmc_scratch41; /* _SCRATCH24_0, offset 140 */ + uint pmc_scratch42; /* _SCRATCH24_0, offset 144 */ + + uint pmc_bo_mirror0; /* _BOUNDOUT_MIRROR0_0, offset 148 */ + uint pmc_bo_mirror1; /* _BOUNDOUT_MIRROR1_0, offset 14C */ + uint pmc_bo_mirror2; /* _BOUNDOUT_MIRROR2_0, offset 150 */ + uint pmc_sys_33v_en; /* _SYS_33V_EN_0, offset 154 */ + uint pmc_bo_mirror_access; /* _BOUNDOUT_MIRROR_ACCESS_0, off158 */ + uint pmc_gate; /* _GATE_0, offset 15C */ +}; + +#define CPU_PWRED 1 +#define CPU_CLMP 1 + +#define PARTID_CP 0xFFFFFFF8 +#define START_CP (1 << 8) + +#define CPUPWRREQ_OE (1 << 16) + +#endif /* PMC_H */ diff --git a/arch/arm/include/asm/arch-tegra20/pmu.h b/arch/arm/include/asm/arch-tegra20/pmu.h new file mode 100644 index 0000000..390815f --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/pmu.h @@ -0,0 +1,30 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ARCH_PMU_H_ +#define _ARCH_PMU_H_ + +/* Set core and CPU voltages to nominal levels */ +int pmu_set_nominal(void); + +#endif /* _ARCH_PMU_H_ */ diff --git a/arch/arm/include/asm/arch-tegra20/scu.h b/arch/arm/include/asm/arch-tegra20/scu.h new file mode 100644 index 0000000..787ded0 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/scu.h @@ -0,0 +1,43 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SCU_H_ +#define _SCU_H_ + +/* ARM Snoop Control Unit (SCU) registers */ +struct scu_ctlr { + uint scu_ctrl; /* SCU Control Register, offset 00 */ + uint scu_cfg; /* SCU Config Register, offset 04 */ + uint scu_cpu_pwr_stat; /* SCU CPU Power Status Register, offset 08 */ + uint scu_inv_all; /* SCU Invalidate All Register, offset 0C */ + uint scu_reserved0[12]; /* reserved, offset 10-3C */ + uint scu_filt_start; /* SCU Filtering Start Address Reg, offset 40 */ + uint scu_filt_end; /* SCU Filtering End Address Reg, offset 44 */ + uint scu_reserved1[2]; /* reserved, offset 48-4C */ + uint scu_acc_ctl; /* SCU Access Control Register, offset 50 */ + uint scu_ns_acc_ctl; /* SCU Non-secure Access Cntrl Reg, offset 54 */ +}; + +#define SCU_CTRL_ENABLE (1 << 0) + +#endif /* SCU_H */ diff --git a/arch/arm/include/asm/arch-tegra20/sdram_param.h b/arch/arm/include/asm/arch-tegra20/sdram_param.h new file mode 100644 index 0000000..6c427d0 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/sdram_param.h @@ -0,0 +1,148 @@ +/* + * (C) Copyright 2010, 2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SDRAM_PARAM_H_ +#define _SDRAM_PARAM_H_ + +/* + * Defines the number of 32-bit words provided in each set of SDRAM parameters + * for arbitration configuration data. + */ +#define BCT_SDRAM_ARB_CONFIG_WORDS 27 + +enum memory_type { + MEMORY_TYPE_NONE = 0, + MEMORY_TYPE_DDR, + MEMORY_TYPE_LPDDR, + MEMORY_TYPE_DDR2, + MEMORY_TYPE_LPDDR2, + MEMORY_TYPE_NUM, + MEMORY_TYPE_FORCE32 = 0x7FFFFFFF +}; + +/* Defines the SDRAM parameter structure */ +struct sdram_params { + enum memory_type memory_type; + u32 pllm_charge_pump_setup_control; + u32 pllm_loop_filter_setup_control; + u32 pllm_input_divider; + u32 pllm_feedback_divider; + u32 pllm_post_divider; + u32 pllm_stable_time; + u32 emc_clock_divider; + u32 emc_auto_cal_interval; + u32 emc_auto_cal_config; + u32 emc_auto_cal_wait; + u32 emc_pin_program_wait; + u32 emc_rc; + u32 emc_rfc; + u32 emc_ras; + u32 emc_rp; + u32 emc_r2w; + u32 emc_w2r; + u32 emc_r2p; + u32 emc_w2p; + u32 emc_rd_rcd; + u32 emc_wr_rcd; + u32 emc_rrd; + u32 emc_rext; + u32 emc_wdv; + u32 emc_quse; + u32 emc_qrst; + u32 emc_qsafe; + u32 emc_rdv; + u32 emc_refresh; + u32 emc_burst_refresh_num; + u32 emc_pdex2wr; + u32 emc_pdex2rd; + u32 emc_pchg2pden; + u32 emc_act2pden; + u32 emc_ar2pden; + u32 emc_rw2pden; + u32 emc_txsr; + u32 emc_tcke; + u32 emc_tfaw; + u32 emc_trpab; + u32 emc_tclkstable; + u32 emc_tclkstop; + u32 emc_trefbw; + u32 emc_quseextra; + u32 emc_fbioc_fg1; + u32 emc_fbio_dqsib_dly; + u32 emc_fbio_dqsib_dly_msb; + u32 emc_fbio_quse_dly; + u32 emc_fbio_quse_dly_msb; + u32 emc_fbio_cfg5; + u32 emc_fbio_cfg6; + u32 emc_fbio_spare; + u32 emc_mrs; + u32 emc_emrs; + u32 emc_mrw1; + u32 emc_mrw2; + u32 emc_mrw3; + u32 emc_mrw_reset_command; + u32 emc_mrw_reset_init_wait; + u32 emc_adr_cfg; + u32 emc_adr_cfg1; + u32 emc_emem_cfg; + u32 emc_low_latency_config; + u32 emc_cfg; + u32 emc_cfg2; + u32 emc_dbg; + u32 ahb_arbitration_xbar_ctrl; + u32 emc_cfg_dig_dll; + u32 emc_dll_xform_dqs; + u32 emc_dll_xform_quse; + u32 warm_boot_wait; + u32 emc_ctt_term_ctrl; + u32 emc_odt_write; + u32 emc_odt_read; + u32 emc_zcal_ref_cnt; + u32 emc_zcal_wait_cnt; + u32 emc_zcal_mrw_cmd; + u32 emc_mrs_reset_dll; + u32 emc_mrw_zq_init_dev0; + u32 emc_mrw_zq_init_dev1; + u32 emc_mrw_zq_init_wait; + u32 emc_mrs_reset_dll_wait; + u32 emc_emrs_emr2; + u32 emc_emrs_emr3; + u32 emc_emrs_ddr2_dll_enable; + u32 emc_mrs_ddr2_dll_reset; + u32 emc_emrs_ddr2_ocd_calib; + u32 emc_edr2_wait; + u32 emc_cfg_clktrim0; + u32 emc_cfg_clktrim1; + u32 emc_cfg_clktrim2; + u32 pmc_ddr_pwr; + u32 apb_misc_gp_xm2cfga_padctrl; + u32 apb_misc_gp_xm2cfgc_padctrl; + u32 apb_misc_gp_xm2cfgc_padctrl2; + u32 apb_misc_gp_xm2cfgd_padctrl; + u32 apb_misc_gp_xm2cfgd_padctrl2; + u32 apb_misc_gp_xm2clkcfg_padctrl; + u32 apb_misc_gp_xm2comp_padctrl; + u32 apb_misc_gp_xm2vttgen_padctrl; + u32 arbitration_config[BCT_SDRAM_ARB_CONFIG_WORDS]; +}; +#endif diff --git a/arch/arm/include/asm/arch-tegra20/sys_proto.h b/arch/arm/include/asm/arch-tegra20/sys_proto.h new file mode 100644 index 0000000..643d542 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/sys_proto.h @@ -0,0 +1,35 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +struct tegra20_sysinfo { + char *board_string; +}; + +void invalidate_dcache(void); + +extern const struct tegra20_sysinfo sysinfo; + +#endif diff --git a/arch/arm/include/asm/arch-tegra20/tegra20.h b/arch/arm/include/asm/arch-tegra20/tegra20.h new file mode 100644 index 0000000..6750754 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/tegra20.h @@ -0,0 +1,91 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _TEGRA20_H_ +#define _TEGRA20_H_ + +#define NV_PA_SDRAM_BASE 0x00000000 +#define NV_PA_ARM_PERIPHBASE 0x50040000 +#define NV_PA_PG_UP_BASE 0x60000000 +#define NV_PA_TMRUS_BASE 0x60005010 +#define NV_PA_CLK_RST_BASE 0x60006000 +#define NV_PA_FLOW_BASE 0x60007000 +#define NV_PA_GPIO_BASE 0x6000D000 +#define NV_PA_EVP_BASE 0x6000F000 +#define NV_PA_APB_MISC_BASE 0x70000000 +#define TEGRA20_APB_MISC_GP_BASE (NV_PA_APB_MISC_BASE + 0x0800) +#define NV_PA_APB_UARTA_BASE (NV_PA_APB_MISC_BASE + 0x6000) +#define NV_PA_APB_UARTB_BASE (NV_PA_APB_MISC_BASE + 0x6040) +#define NV_PA_APB_UARTC_BASE (NV_PA_APB_MISC_BASE + 0x6200) +#define NV_PA_APB_UARTD_BASE (NV_PA_APB_MISC_BASE + 0x6300) +#define NV_PA_APB_UARTE_BASE (NV_PA_APB_MISC_BASE + 0x6400) +#define TEGRA20_SPI_BASE (NV_PA_APB_MISC_BASE + 0xC380) +#define TEGRA20_PMC_BASE (NV_PA_APB_MISC_BASE + 0xE400) +#define TEGRA20_FUSE_BASE (NV_PA_APB_MISC_BASE + 0xF800) +#define NV_PA_CSITE_BASE 0x70040000 +#define TEGRA_USB1_BASE 0xC5000000 +#define TEGRA_USB3_BASE 0xC5008000 +#define TEGRA_USB_ADDR_MASK 0xFFFFC000 + +#define TEGRA20_SDRC_CS0 NV_PA_SDRAM_BASE +#define LOW_LEVEL_SRAM_STACK 0x4000FFFC +#define EARLY_AVP_STACK (NV_PA_SDRAM_BASE + 0x20000) +#define EARLY_CPU_STACK (EARLY_AVP_STACK - 4096) +#define PG_UP_TAG_AVP 0xAAAAAAAA + +#ifndef __ASSEMBLY__ +struct timerus { + unsigned int cntr_1us; +}; + +/* Address at which WB code runs, it must not overlap Bootrom's IRAM usage */ +#define AP20_WB_RUN_ADDRESS 0x40020000 + +#define NVBOOTINFOTABLE_BCTSIZE 0x38 /* BCT size in BIT in IRAM */ +#define NVBOOTINFOTABLE_BCTPTR 0x3C /* BCT pointer in BIT in IRAM */ +#define BCT_ODMDATA_OFFSET 4068 /* 12 bytes from end of BCT */ + +/* These are the available SKUs (product types) for Tegra */ +enum { + SKU_ID_T20 = 0x8, + SKU_ID_T25SE = 0x14, + SKU_ID_AP25 = 0x17, + SKU_ID_T25 = 0x18, + SKU_ID_AP25E = 0x1b, + SKU_ID_T25E = 0x1c, +}; + +/* These are the SOC categories that affect clocking */ +enum { + TEGRA_SOC_T20, + TEGRA_SOC_T25, + + TEGRA_SOC_COUNT, + TEGRA_SOC_UNKNOWN = -1, +}; + +#else /* __ASSEMBLY__ */ +#define PRM_RSTCTRL TEGRA20_PMC_BASE +#endif + +#endif /* TEGRA20_H */ diff --git a/arch/arm/include/asm/arch-tegra20/tegra_i2c.h b/arch/arm/include/asm/arch-tegra20/tegra_i2c.h new file mode 100644 index 0000000..6abfe4e --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/tegra_i2c.h @@ -0,0 +1,164 @@ +/* + * NVIDIA Tegra20 I2C controller + * + * Copyright 2010-2011 NVIDIA Corporation + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _TEGRA_I2C_H_ +#define _TEGRA_I2C_H_ + +#include <asm/types.h> + +enum { + I2C_TIMEOUT_USEC = 10000, /* Wait time for completion */ + I2C_FIFO_DEPTH = 8, /* I2C fifo depth */ +}; + +enum i2c_transaction_flags { + I2C_IS_WRITE = 0x1, /* for I2C write operation */ + I2C_IS_10_BIT_ADDRESS = 0x2, /* for 10-bit I2C slave address */ + I2C_USE_REPEATED_START = 0x4, /* for repeat start */ + I2C_NO_ACK = 0x8, /* for slave that won't generate ACK */ + I2C_SOFTWARE_CONTROLLER = 0x10, /* for I2C transfer using GPIO */ + I2C_NO_STOP = 0x20, +}; + +/* Contians the I2C transaction details */ +struct i2c_trans_info { + /* flags to indicate the transaction details */ + enum i2c_transaction_flags flags; + u32 address; /* I2C slave device address */ + u32 num_bytes; /* number of bytes to be transferred */ + /* + * Send/receive buffer. For the I2C send operation this buffer should + * be filled with the data to be sent to the slave device. For the I2C + * receive operation this buffer is filled with the data received from + * the slave device. + */ + u8 *buf; + int is_10bit_address; +}; + +struct i2c_control { + u32 tx_fifo; + u32 rx_fifo; + u32 packet_status; + u32 fifo_control; + u32 fifo_status; + u32 int_mask; + u32 int_status; +}; + +struct dvc_ctlr { + u32 ctrl1; /* 00: DVC_CTRL_REG1 */ + u32 ctrl2; /* 04: DVC_CTRL_REG2 */ + u32 ctrl3; /* 08: DVC_CTRL_REG3 */ + u32 status; /* 0C: DVC_STATUS_REG */ + u32 ctrl; /* 10: DVC_I2C_CTRL_REG */ + u32 addr_data; /* 14: DVC_I2C_ADDR_DATA_REG */ + u32 reserved_0[2]; /* 18: */ + u32 req; /* 20: DVC_REQ_REGISTER */ + u32 addr_data3; /* 24: DVC_I2C_ADDR_DATA_REG_3 */ + u32 reserved_1[6]; /* 28: */ + u32 cnfg; /* 40: DVC_I2C_CNFG */ + u32 cmd_addr0; /* 44: DVC_I2C_CMD_ADDR0 */ + u32 cmd_addr1; /* 48: DVC_I2C_CMD_ADDR1 */ + u32 cmd_data1; /* 4C: DVC_I2C_CMD_DATA1 */ + u32 cmd_data2; /* 50: DVC_I2C_CMD_DATA2 */ + u32 reserved_2[2]; /* 54: */ + u32 i2c_status; /* 5C: DVC_I2C_STATUS */ + struct i2c_control control; /* 60 ~ 78 */ +}; + +struct i2c_ctlr { + u32 cnfg; /* 00: I2C_I2C_CNFG */ + u32 cmd_addr0; /* 04: I2C_I2C_CMD_ADDR0 */ + u32 cmd_addr1; /* 08: I2C_I2C_CMD_DATA1 */ + u32 cmd_data1; /* 0C: I2C_I2C_CMD_DATA2 */ + u32 cmd_data2; /* 10: DVC_I2C_CMD_DATA2 */ + u32 reserved_0[2]; /* 14: */ + u32 status; /* 1C: I2C_I2C_STATUS */ + u32 sl_cnfg; /* 20: I2C_I2C_SL_CNFG */ + u32 sl_rcvd; /* 24: I2C_I2C_SL_RCVD */ + u32 sl_status; /* 28: I2C_I2C_SL_STATUS */ + u32 sl_addr1; /* 2C: I2C_I2C_SL_ADDR1 */ + u32 sl_addr2; /* 30: I2C_I2C_SL_ADDR2 */ + u32 reserved_1[2]; /* 34: */ + u32 sl_delay_count; /* 3C: I2C_I2C_SL_DELAY_COUNT */ + u32 reserved_2[4]; /* 40: */ + struct i2c_control control; /* 50 ~ 68 */ +}; + +/* bit fields definitions for IO Packet Header 1 format */ +#define PKT_HDR1_PROTOCOL_SHIFT 4 +#define PKT_HDR1_PROTOCOL_MASK (0xf << PKT_HDR1_PROTOCOL_SHIFT) +#define PKT_HDR1_CTLR_ID_SHIFT 12 +#define PKT_HDR1_CTLR_ID_MASK (0xf << PKT_HDR1_CTLR_ID_SHIFT) +#define PKT_HDR1_PKT_ID_SHIFT 16 +#define PKT_HDR1_PKT_ID_MASK (0xff << PKT_HDR1_PKT_ID_SHIFT) +#define PROTOCOL_TYPE_I2C 1 + +/* bit fields definitions for IO Packet Header 2 format */ +#define PKT_HDR2_PAYLOAD_SIZE_SHIFT 0 +#define PKT_HDR2_PAYLOAD_SIZE_MASK (0xfff << PKT_HDR2_PAYLOAD_SIZE_SHIFT) + +/* bit fields definitions for IO Packet Header 3 format */ +#define PKT_HDR3_READ_MODE_SHIFT 19 +#define PKT_HDR3_READ_MODE_MASK (1 << PKT_HDR3_READ_MODE_SHIFT) +#define PKT_HDR3_SLAVE_ADDR_SHIFT 0 +#define PKT_HDR3_SLAVE_ADDR_MASK (0x3ff << PKT_HDR3_SLAVE_ADDR_SHIFT) + +#define DVC_CTRL_REG3_I2C_HW_SW_PROG_SHIFT 26 +#define DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK \ + (1 << DVC_CTRL_REG3_I2C_HW_SW_PROG_SHIFT) + +/* I2C_CNFG */ +#define I2C_CNFG_NEW_MASTER_FSM_SHIFT 11 +#define I2C_CNFG_NEW_MASTER_FSM_MASK (1 << I2C_CNFG_NEW_MASTER_FSM_SHIFT) +#define I2C_CNFG_PACKET_MODE_SHIFT 10 +#define I2C_CNFG_PACKET_MODE_MASK (1 << I2C_CNFG_PACKET_MODE_SHIFT) + +/* I2C_SL_CNFG */ +#define I2C_SL_CNFG_NEWSL_SHIFT 2 +#define I2C_SL_CNFG_NEWSL_MASK (1 << I2C_SL_CNFG_NEWSL_SHIFT) + +/* I2C_FIFO_STATUS */ +#define TX_FIFO_FULL_CNT_SHIFT 0 +#define TX_FIFO_FULL_CNT_MASK (0xf << TX_FIFO_FULL_CNT_SHIFT) +#define TX_FIFO_EMPTY_CNT_SHIFT 4 +#define TX_FIFO_EMPTY_CNT_MASK (0xf << TX_FIFO_EMPTY_CNT_SHIFT) + +/* I2C_INTERRUPT_STATUS */ +#define I2C_INT_XFER_COMPLETE_SHIFT 7 +#define I2C_INT_XFER_COMPLETE_MASK (1 << I2C_INT_XFER_COMPLETE_SHIFT) +#define I2C_INT_NO_ACK_SHIFT 3 +#define I2C_INT_NO_ACK_MASK (1 << I2C_INT_NO_ACK_SHIFT) +#define I2C_INT_ARBITRATION_LOST_SHIFT 2 +#define I2C_INT_ARBITRATION_LOST_MASK (1 << I2C_INT_ARBITRATION_LOST_SHIFT) + +/** + * Returns the bus number of the DVC controller + * + * @return number of bus, or -1 if there is no DVC active + */ +int tegra_i2c_get_dvc_bus_num(void); + +#endif diff --git a/arch/arm/include/asm/arch-tegra20/tegra_spi.h b/arch/arm/include/asm/arch-tegra20/tegra_spi.h new file mode 100644 index 0000000..8978bea --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/tegra_spi.h @@ -0,0 +1,75 @@ +/* + * NVIDIA Tegra20 SPI-FLASH controller + * + * Copyright 2010-2012 NVIDIA Corporation + * + * This software may be used and distributed according to the + * terms of the GNU Public License, Version 2, incorporated + * herein by reference. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _TEGRA_SPI_H_ +#define _TEGRA_SPI_H_ + +#include <asm/types.h> + +struct spi_tegra { + u32 command; /* SPI_COMMAND_0 register */ + u32 status; /* SPI_STATUS_0 register */ + u32 rx_cmp; /* SPI_RX_CMP_0 register */ + u32 dma_ctl; /* SPI_DMA_CTL_0 register */ + u32 tx_fifo; /* SPI_TX_FIFO_0 register */ + u32 rsvd[3]; /* offsets 0x14 to 0x1F reserved */ + u32 rx_fifo; /* SPI_RX_FIFO_0 register */ +}; + +#define SPI_CMD_GO (1 << 30) +#define SPI_CMD_ACTIVE_SCLK_SHIFT 26 +#define SPI_CMD_ACTIVE_SCLK_MASK (3 << SPI_CMD_ACTIVE_SCLK_SHIFT) +#define SPI_CMD_CK_SDA (1 << 21) +#define SPI_CMD_ACTIVE_SDA_SHIFT 18 +#define SPI_CMD_ACTIVE_SDA_MASK (3 << SPI_CMD_ACTIVE_SDA_SHIFT) +#define SPI_CMD_CS_POL (1 << 16) +#define SPI_CMD_TXEN (1 << 15) +#define SPI_CMD_RXEN (1 << 14) +#define SPI_CMD_CS_VAL (1 << 13) +#define SPI_CMD_CS_SOFT (1 << 12) +#define SPI_CMD_CS_DELAY (1 << 9) +#define SPI_CMD_CS3_EN (1 << 8) +#define SPI_CMD_CS2_EN (1 << 7) +#define SPI_CMD_CS1_EN (1 << 6) +#define SPI_CMD_CS0_EN (1 << 5) +#define SPI_CMD_BIT_LENGTH (1 << 4) +#define SPI_CMD_BIT_LENGTH_MASK 0x0000001F + +#define SPI_STAT_BSY (1 << 31) +#define SPI_STAT_RDY (1 << 30) +#define SPI_STAT_RXF_FLUSH (1 << 29) +#define SPI_STAT_TXF_FLUSH (1 << 28) +#define SPI_STAT_RXF_UNR (1 << 27) +#define SPI_STAT_TXF_OVF (1 << 26) +#define SPI_STAT_RXF_EMPTY (1 << 25) +#define SPI_STAT_RXF_FULL (1 << 24) +#define SPI_STAT_TXF_EMPTY (1 << 23) +#define SPI_STAT_TXF_FULL (1 << 22) +#define SPI_STAT_SEL_TXRX_N (1 << 16) +#define SPI_STAT_CUR_BLKCNT (1 << 15) + +#define SPI_TIMEOUT 1000 +#define TEGRA20_SPI_MAX_FREQ 52000000 + +#endif /* _TEGRA_SPI_H_ */ diff --git a/arch/arm/include/asm/arch-tegra20/timer.h b/arch/arm/include/asm/arch-tegra20/timer.h new file mode 100644 index 0000000..43f7ab4 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/timer.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Tegra20 timer functions */ + +#ifndef _TEGRA20_TIMER_H +#define _TEGRA20_TIMER_H + +/* returns the current monotonic timer value in microseconds */ +unsigned long timer_get_us(void); + +#endif diff --git a/arch/arm/include/asm/arch-tegra20/uart-spi-switch.h b/arch/arm/include/asm/arch-tegra20/uart-spi-switch.h new file mode 100644 index 0000000..82ac180 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/uart-spi-switch.h @@ -0,0 +1,46 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _UART_SPI_SWITCH_H +#define _UART_SPI_SWITCH_H + +#if defined(CONFIG_SPI_UART_SWITCH) +/* + * Signal that we are about to use the UART. This unfortunate hack is + * required by Seaboard, which cannot use its console and SPI at the same + * time! If the board file provides this, the board config will declare it. + * Let this be a lesson for others. + */ +void pinmux_select_uart(void); + +/* + * Signal that we are about the use the SPI bus. + */ +void pinmux_select_spi(void); + +#else /* not CONFIG_SPI_UART_SWITCH */ + +static inline void pinmux_select_uart(void) {} +static inline void pinmux_select_spi(void) {} + +#endif + +#endif diff --git a/arch/arm/include/asm/arch-tegra20/uart.h b/arch/arm/include/asm/arch-tegra20/uart.h new file mode 100644 index 0000000..aea29a7 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/uart.h @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2010,2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _UART_H_ +#define _UART_H_ + +/* UART registers */ +struct uart_ctlr { + uint uart_thr_dlab_0; /* UART_THR_DLAB_0_0, offset 00 */ + uint uart_ier_dlab_0; /* UART_IER_DLAB_0_0, offset 04 */ + uint uart_iir_fcr; /* UART_IIR_FCR_0, offset 08 */ + uint uart_lcr; /* UART_LCR_0, offset 0C */ + uint uart_mcr; /* UART_MCR_0, offset 10 */ + uint uart_lsr; /* UART_LSR_0, offset 14 */ + uint uart_msr; /* UART_MSR_0, offset 18 */ + uint uart_spr; /* UART_SPR_0, offset 1C */ + uint uart_irda_csr; /* UART_IRDA_CSR_0, offset 20 */ + uint uart_reserved[6]; /* Reserved, unused, offset 24-38*/ + uint uart_asr; /* UART_ASR_0, offset 3C */ +}; + +#define NVRM_PLLP_FIXED_FREQ_KHZ 216000 +#define NV_DEFAULT_DEBUG_BAUD 115200 + +#define UART_FCR_TRIGGER_3 0x30 /* Mask for trigger set at 3 */ + +#endif /* UART_H */ diff --git a/arch/arm/include/asm/arch-tegra20/usb.h b/arch/arm/include/asm/arch-tegra20/usb.h new file mode 100644 index 0000000..638033b --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/usb.h @@ -0,0 +1,252 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _TEGRA_USB_H_ +#define _TEGRA_USB_H_ + + +/* USB Controller (USBx_CONTROLLER_) regs */ +struct usb_ctlr { + /* 0x000 */ + uint id; + uint reserved0; + uint host; + uint device; + + /* 0x010 */ + uint txbuf; + uint rxbuf; + uint reserved1[2]; + + /* 0x020 */ + uint reserved2[56]; + + /* 0x100 */ + u16 cap_length; + u16 hci_version; + uint hcs_params; + uint hcc_params; + uint reserved3[5]; + + /* 0x120 */ + uint dci_version; + uint dcc_params; + uint reserved4[6]; + + /* 0x140 */ + uint usb_cmd; + uint usb_sts; + uint usb_intr; + uint frindex; + + /* 0x150 */ + uint reserved5; + uint periodic_list_base; + uint async_list_addr; + uint async_tt_sts; + + /* 0x160 */ + uint burst_size; + uint tx_fill_tuning; + uint reserved6; /* is this port_sc1 on some controllers? */ + uint icusb_ctrl; + + /* 0x170 */ + uint ulpi_viewport; + uint reserved7; + uint endpt_nak; + uint endpt_nak_enable; + + /* 0x180 */ + uint reserved; + uint port_sc1; + uint reserved8[6]; + + /* 0x1a0 */ + uint reserved9; + uint otgsc; + uint usb_mode; + uint endpt_setup_stat; + + /* 0x1b0 */ + uint reserved10[20]; + + /* 0x200 */ + uint reserved11[0x80]; + + /* 0x400 */ + uint susp_ctrl; + uint phy_vbus_sensors; + uint phy_vbus_wakeup_id; + uint phy_alt_vbus_sys; + + /* 0x410 */ + uint usb1_legacy_ctrl; + uint reserved12[3]; + + /* 0x420 */ + uint reserved13[56]; + + /* 0x500 */ + uint reserved14[64 * 3]; + + /* 0x800 */ + uint utmip_pll_cfg0; + uint utmip_pll_cfg1; + uint utmip_xcvr_cfg0; + uint utmip_bias_cfg0; + + /* 0x810 */ + uint utmip_hsrx_cfg0; + uint utmip_hsrx_cfg1; + uint utmip_fslsrx_cfg0; + uint utmip_fslsrx_cfg1; + + /* 0x820 */ + uint utmip_tx_cfg0; + uint utmip_misc_cfg0; + uint utmip_misc_cfg1; + uint utmip_debounce_cfg0; + + /* 0x830 */ + uint utmip_bat_chrg_cfg0; + uint utmip_spare_cfg0; + uint utmip_xcvr_cfg1; + uint utmip_bias_cfg1; +}; + + +/* USB1_LEGACY_CTRL */ +#define USB1_NO_LEGACY_MODE 1 + +#define VBUS_SENSE_CTL_SHIFT 1 +#define VBUS_SENSE_CTL_MASK (3 << VBUS_SENSE_CTL_SHIFT) +#define VBUS_SENSE_CTL_VBUS_WAKEUP 0 +#define VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP 1 +#define VBUS_SENSE_CTL_AB_SESS_VLD 2 +#define VBUS_SENSE_CTL_A_SESS_VLD 3 + +/* USBx_IF_USB_SUSP_CTRL_0 */ +#define UTMIP_PHY_ENB (1 << 12) +#define UTMIP_RESET (1 << 11) +#define USB_PHY_CLK_VALID (1 << 7) + +/* USBx_UTMIP_MISC_CFG1 */ +#define UTMIP_PLLU_STABLE_COUNT_SHIFT 6 +#define UTMIP_PLLU_STABLE_COUNT_MASK \ + (0xfff << UTMIP_PLLU_STABLE_COUNT_SHIFT) +#define UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT 18 +#define UTMIP_PLL_ACTIVE_DLY_COUNT_MASK \ + (0x1f << UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT) +#define UTMIP_PHY_XTAL_CLOCKEN (1 << 30) + +/* USBx_UTMIP_PLL_CFG1_0 */ +#define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT 27 +#define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK \ + (0xf << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT) +#define UTMIP_XTAL_FREQ_COUNT_SHIFT 0 +#define UTMIP_XTAL_FREQ_COUNT_MASK 0xfff + +/* USBx_UTMIP_BIAS_CFG1_0 */ +#define UTMIP_BIAS_PDTRK_COUNT_SHIFT 3 +#define UTMIP_BIAS_PDTRK_COUNT_MASK \ + (0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT) + +#define UTMIP_DEBOUNCE_CFG0_SHIFT 0 +#define UTMIP_DEBOUNCE_CFG0_MASK 0xffff + +/* USBx_UTMIP_TX_CFG0_0 */ +#define UTMIP_FS_PREAMBLE_J (1 << 19) + +/* USBx_UTMIP_BAT_CHRG_CFG0_0 */ +#define UTMIP_PD_CHRG 1 + +/* USBx_UTMIP_XCVR_CFG0_0 */ +#define UTMIP_XCVR_LSBIAS_SE (1 << 21) + +/* USBx_UTMIP_SPARE_CFG0_0 */ +#define FUSE_SETUP_SEL (1 << 3) + +/* USBx_UTMIP_HSRX_CFG0_0 */ +#define UTMIP_IDLE_WAIT_SHIFT 15 +#define UTMIP_IDLE_WAIT_MASK (0x1f << UTMIP_IDLE_WAIT_SHIFT) +#define UTMIP_ELASTIC_LIMIT_SHIFT 10 +#define UTMIP_ELASTIC_LIMIT_MASK \ + (0x1f << UTMIP_ELASTIC_LIMIT_SHIFT) + +/* USBx_UTMIP_HSRX_CFG0_1 */ +#define UTMIP_HS_SYNC_START_DLY_SHIFT 1 +#define UTMIP_HS_SYNC_START_DLY_MASK \ + (0xf << UTMIP_HS_SYNC_START_DLY_SHIFT) + +/* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */ +#define IC_ENB1 (1 << 3) + +/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */ +#define PTS_SHIFT 30 +#define PTS_MASK (3U << PTS_SHIFT) +#define PTS_UTMI 0 +#define PTS_RESERVED 1 +#define PTS_ULP 2 +#define PTS_ICUSB_SER 3 + +#define STS (1 << 29) + +/* USBx_UTMIP_XCVR_CFG0_0 */ +#define UTMIP_FORCE_PD_POWERDOWN (1 << 14) +#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16) +#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18) + +/* USBx_UTMIP_XCVR_CFG1_0 */ +#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0) +#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2) +#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4) + +/* USB3_IF_USB_PHY_VBUS_SENSORS_0 */ +#define VBUS_VLD_STS (1 << 26) + + +/* Change the USB host port into host mode */ +void usb_set_host_mode(void); + +/* Setup USB on the board */ +int board_usb_init(const void *blob); + +/** + * Start up the given port number (ports are numbered from 0 on each board). + * This returns values for the appropriate hccr and hcor addresses to use for + * USB EHCI operations. + * + * @param portnum port number to start + * @param hccr returns start address of EHCI HCCR registers + * @param hcor returns start address of EHCI HCOR registers + * @return 0 if ok, -1 on error (generally invalid port number) + */ +int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor); + +/** + * Stop the current port + * + * @return 0 if ok, -1 if no port was active + */ +int tegrausb_stop_port(void); + +#endif /* _TEGRA_USB_H_ */ diff --git a/arch/arm/include/asm/arch-tegra20/warmboot.h b/arch/arm/include/asm/arch-tegra20/warmboot.h new file mode 100644 index 0000000..99ac2e7 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/warmboot.h @@ -0,0 +1,150 @@ +/* + * (C) Copyright 2010, 2011 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _WARM_BOOT_H_ +#define _WARM_BOOT_H_ + +#define STRAP_OPT_A_RAM_CODE_SHIFT 4 +#define STRAP_OPT_A_RAM_CODE_MASK (0xf << STRAP_OPT_A_RAM_CODE_SHIFT) + +/* Defines the supported operating modes */ +enum fuse_operating_mode { + MODE_PRODUCTION = 3, + MODE_UNDEFINED, +}; + +/* Defines the CMAC-AES-128 hash length in 32 bit words. (128 bits = 4 words) */ +enum { + HASH_LENGTH = 4 +}; + +/* Defines the storage for a hash value (128 bits) */ +struct hash { + u32 hash[HASH_LENGTH]; +}; + +/* + * Defines the code header information for the boot rom. + * + * The code immediately follows the code header. + * + * Note that the code header needs to be 16 bytes aligned to preserve + * the alignment of relevant data for hash and decryption computations without + * requiring extra copies to temporary memory areas. + */ +struct wb_header { + u32 length_insecure; /* length of the code header */ + u32 reserved[3]; + struct hash hash; /* hash of header+code, starts next field*/ + struct hash random_aes_block; /* a data block to aid security. */ + u32 length_secure; /* length of the code header */ + u32 destination; /* destination address to put the wb code */ + u32 entry_point; /* execution address of the wb code */ + u32 code_length; /* length of the code */ +}; + +/* + * The warm boot code needs direct access to these registers since it runs in + * SRAM and cannot call other U-Boot code. + */ +union osc_ctrl_reg { + struct { + u32 xoe:1; + u32 xobp:1; + u32 reserved0:2; + u32 xofs:6; + u32 reserved1:2; + u32 xods:5; + u32 reserved2:3; + u32 oscfi_spare:8; + u32 pll_ref_div:2; + u32 osc_freq:2; + }; + u32 word; +}; + +union pllx_base_reg { + struct { + u32 divm:5; + u32 reserved0:3; + u32 divn:10; + u32 reserved1:2; + u32 divp:3; + u32 reserved2:4; + u32 lock:1; + u32 reserved3:1; + u32 ref_dis:1; + u32 enable:1; + u32 bypass:1; + }; + u32 word; +}; + +union pllx_misc_reg { + struct { + u32 vcocon:4; + u32 lfcon:4; + u32 cpcon:4; + u32 lock_sel:6; + u32 reserved0:1; + u32 lock_enable:1; + u32 reserved1:1; + u32 dccon:1; + u32 pts:2; + u32 reserved2:6; + u32 out1_div_byp:1; + u32 out1_inv_clk:1; + }; + u32 word; +}; + +/* + * TODO: This register is not documented in the TRM yet. We could move this + * into the EMC and give it a proper interface, but not while it is + * undocumented. + */ +union scratch3_reg { + struct { + u32 pllx_base_divm:5; + u32 pllx_base_divn:10; + u32 pllx_base_divp:3; + u32 pllx_misc_lfcon:4; + u32 pllx_misc_cpcon:4; + }; + u32 word; +}; + + +/** + * Save warmboot memory settings for a later resume + * + * @return 0 if ok, -1 on error + */ +int warmboot_save_sdram_params(void); + +int warmboot_prepare_code(u32 seg_address, u32 seg_length); +int sign_data_block(u8 *source, u32 length, u8 *signature); +void wb_start(void); /* Start of WB assembly code */ +void wb_end(void); /* End of WB assembly code */ + +#endif |