summaryrefslogtreecommitdiff
path: root/arch/arm/dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/dts')
-rw-r--r--arch/arm/dts/Makefile7
-rw-r--r--arch/arm/dts/zynq-7000.dtsi14
-rw-r--r--arch/arm/dts/zynq-microzed.dts38
-rw-r--r--arch/arm/dts/zynq-zc702.dts29
-rw-r--r--arch/arm/dts/zynq-zc706.dts27
-rw-r--r--arch/arm/dts/zynq-zc770-xm010.dts44
-rw-r--r--arch/arm/dts/zynq-zc770-xm011.dts3
-rw-r--r--arch/arm/dts/zynq-zc770-xm012.dts2
-rw-r--r--arch/arm/dts/zynq-zc770-xm013.dts9
-rw-r--r--arch/arm/dts/zynq-zed.dts8
-rw-r--r--arch/arm/dts/zynq-zybo.dts10
-rw-r--r--arch/arm/dts/zynqmp-clk.dtsi202
-rw-r--r--arch/arm/dts/zynqmp-ep108-clk.dtsi4
-rw-r--r--arch/arm/dts/zynqmp-ep108.dts61
-rw-r--r--arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts211
-rw-r--r--arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts236
-rw-r--r--arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts121
-rw-r--r--arch/arm/dts/zynqmp-zcu102-revB.dts42
-rw-r--r--arch/arm/dts/zynqmp-zcu102.dts631
-rw-r--r--arch/arm/dts/zynqmp.dtsi382
20 files changed, 1981 insertions, 100 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0915e05..aa31fd9 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -81,7 +81,12 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
zynq-zc770-xm012.dtb \
zynq-zc770-xm013.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += \
- zynqmp-ep108.dtb
+ zynqmp-ep108.dtb \
+ zynqmp-zcu102.dtb \
+ zynqmp-zcu102-revB.dtb \
+ zynqmp-zc1751-xm015-dc1.dtb \
+ zynqmp-zc1751-xm016-dc2.dtb \
+ zynqmp-zc1751-xm019-dc5.dtb
dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-evm.dtb
dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb
dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index 2d786f0..a327557 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -96,8 +96,10 @@
gpio0: gpio@e000a000 {
compatible = "xlnx,zynq-gpio-1.0";
#gpio-cells = <2>;
+ #interrupt-cells = <2>;
clocks = <&clkc 42>;
gpio-controller;
+ interrupt-controller;
interrupt-parent = <&intc>;
interrupts = <0 20 4>;
reg = <0xe000a000 0x1000>;
@@ -270,6 +272,13 @@
reg = <0x100 0x100>;
};
+ rstc: rstc@200 {
+ compatible = "xlnx,zynq-reset";
+ reg = <0x200 0x48>;
+ #reset-cells = <1>;
+ syscon = <&slcr>;
+ };
+
pinctrl0: pinctrl@700 {
compatible = "xlnx,pinctrl-zynq";
reg = <0x700 0x200>;
@@ -297,7 +306,12 @@
devcfg: devcfg@f8007000 {
compatible = "xlnx,zynq-devcfg-1.0";
+ interrupt-parent = <&intc>;
+ interrupts = <0 8 4>;
reg = <0xf8007000 0x100>;
+ clocks = <&clkc 12>, <&clkc 15>, <&clkc 16>, <&clkc 17>, <&clkc 18>;
+ clock-names = "ref_clk", "fclk0", "fclk1", "fclk2", "fclk3";
+ syscon = <&slcr>;
};
global_timer: timer@f8f00200 {
diff --git a/arch/arm/dts/zynq-microzed.dts b/arch/arm/dts/zynq-microzed.dts
index 793ab44..cb238cd 100644
--- a/arch/arm/dts/zynq-microzed.dts
+++ b/arch/arm/dts/zynq-microzed.dts
@@ -1,7 +1,7 @@
/*
* Xilinx MicroZED board DTS
*
- * Copyright (C) 2013 Xilinx, Inc.
+ * Copyright (C) 2013 - 2016 Xilinx, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -15,12 +15,27 @@
aliases {
serial0 = &uart1;
spi0 = &qspi;
+ mmc0 = &sdhci0;
};
memory {
device_type = "memory";
reg = <0 0x40000000>;
};
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ usb_phy0: phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
};
&qspi {
@@ -32,3 +47,24 @@
u-boot,dm-pre-reloc;
status = "okay";
};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethernet_phy>;
+
+ ethernet_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&sdhci0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+};
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index 528cd27..6585010 100644
--- a/arch/arm/dts/zynq-zc702.dts
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -27,7 +27,7 @@
};
chosen {
- bootargs = "earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
@@ -91,6 +91,8 @@
phy-handle = <&ethernet_phy>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gem0_default>;
+ phy-reset-gpio = <&gpio0 11 0>;
+ phy-reset-active-low;
ethernet_phy: ethernet-phy@7 {
reg = <7>;
@@ -128,6 +130,21 @@
};
};
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ adv7511: hdmi-tx@39 {
+ compatible = "adi,adv7511";
+ reg = <0x39>;
+ adi,input-depth = <8>;
+ adi,input-colorspace = "yuv422";
+ adi,input-clock = "1x";
+ adi,input-style = <3>;
+ adi,input-justification = "right";
+ };
+ };
+
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
@@ -370,6 +387,11 @@
};
};
+&qspi {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
&sdhci0 {
u-boot,dm-pre-reloc;
status = "okay";
@@ -384,11 +406,6 @@
pinctrl-0 = <&pinctrl_uart1_default>;
};
-&qspi {
- u-boot,dm-pre-reloc;
- status = "okay";
-};
-
&usb0 {
status = "okay";
dr_mode = "host";
diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts
index 1610520..d04880a 100644
--- a/arch/arm/dts/zynq-zc706.dts
+++ b/arch/arm/dts/zynq-zc706.dts
@@ -27,7 +27,7 @@
};
chosen {
- bootargs = "earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
@@ -84,6 +84,21 @@
};
};
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ adv7511: hdmi-tx@39 {
+ compatible = "adi,adv7511";
+ reg = <0x39>;
+ adi,input-depth = <8>;
+ adi,input-colorspace = "yuv422";
+ adi,input-clock = "1x";
+ adi,input-style = <3>;
+ adi,input-justification = "evenly";
+ };
+ };
+
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
@@ -291,6 +306,11 @@
};
};
+&qspi {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
&sdhci0 {
u-boot,dm-pre-reloc;
status = "okay";
@@ -305,11 +325,6 @@
pinctrl-0 = <&pinctrl_uart1_default>;
};
-&qspi {
- u-boot,dm-pre-reloc;
- status = "okay";
-};
-
&usb0 {
status = "okay";
dr_mode = "host";
diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
index b6982c0..33524cb 100644
--- a/arch/arm/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -21,7 +21,7 @@
};
chosen {
- bootargs = "root=/dev/ram rw earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
@@ -36,27 +36,6 @@
};
};
-&spi1 {
- status = "okay";
- num-cs = <4>;
- is-decoded-cs = <0>;
- flash@0 {
- compatible = "sst25wf080";
- reg = <1>;
- spi-max-frequency = <1000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@test {
- label = "spi-flash";
- reg = <0x0 0x100000>;
- };
- };
-};
-
-&qspi {
- status = "okay";
-};
-
&can0 {
status = "okay";
};
@@ -82,10 +61,31 @@
};
+&qspi {
+ status = "okay";
+};
+
&sdhci0 {
status = "okay";
};
+&spi1 {
+ status = "okay";
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+ flash@0 {
+ compatible = "sst25wf080";
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@test {
+ label = "spi-flash";
+ reg = <0x0 0x100000>;
+ };
+ };
+};
+
&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts
index 4fed221..463b14b 100644
--- a/arch/arm/dts/zynq-zc770-xm011.dts
+++ b/arch/arm/dts/zynq-zc770-xm011.dts
@@ -7,6 +7,7 @@
*/
/dts-v1/;
#include "zynq-7000.dtsi"
+
/ {
compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
model = "Xilinx Zynq";
@@ -18,7 +19,7 @@
};
chosen {
- bootargs = "root=/dev/ram rw earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts
index 8d69f0e..6cab832 100644
--- a/arch/arm/dts/zynq-zc770-xm012.dts
+++ b/arch/arm/dts/zynq-zc770-xm012.dts
@@ -20,7 +20,7 @@
};
chosen {
- bootargs = "root=/dev/ram rw earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts
index 77fdfcc..d5bb4ef 100644
--- a/arch/arm/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/dts/zynq-zc770-xm013.dts
@@ -16,11 +16,12 @@
ethernet0 = &gem1;
i2c0 = &i2c1;
serial0 = &uart0;
- spi0 = &spi0;
+ spi0 = &qspi;
+ spi1 = &spi0;
};
chosen {
- bootargs = "root=/dev/ram rw earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
@@ -58,6 +59,10 @@
};
};
+&qspi {
+ status = "okay";
+};
+
&spi0 {
status = "okay";
num-cs = <4>;
diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts
index ec9b2f7..4363a4f 100644
--- a/arch/arm/dts/zynq-zed.dts
+++ b/arch/arm/dts/zynq-zed.dts
@@ -26,7 +26,7 @@
};
chosen {
- bootargs = "earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
@@ -50,17 +50,17 @@
};
};
-&sdhci0 {
+&qspi {
u-boot,dm-pre-reloc;
status = "okay";
};
-&uart1 {
+&sdhci0 {
u-boot,dm-pre-reloc;
status = "okay";
};
-&qspi {
+&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
};
diff --git a/arch/arm/dts/zynq-zybo.dts b/arch/arm/dts/zynq-zybo.dts
index d04e962..f8dcf1d 100644
--- a/arch/arm/dts/zynq-zybo.dts
+++ b/arch/arm/dts/zynq-zybo.dts
@@ -26,13 +26,13 @@
};
chosen {
- bootargs = "earlyprintk";
+ bootargs = "";
stdout-path = "serial0:115200n8";
};
usb_phy0: phy0 {
- #phy-cells = <0>;
compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
reset-gpios = <&gpio0 46 1>;
};
};
@@ -51,17 +51,17 @@
};
};
-&sdhci0 {
+&qspi {
u-boot,dm-pre-reloc;
status = "okay";
};
-&uart1 {
+&sdhci0 {
u-boot,dm-pre-reloc;
status = "okay";
};
-&qspi {
+&uart1 {
u-boot,dm-pre-reloc;
status = "okay";
};
diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi
new file mode 100644
index 0000000..3418909
--- /dev/null
+++ b/arch/arm/dts/zynqmp-clk.dtsi
@@ -0,0 +1,202 @@
+/*
+ * Clock specification for Xilinx ZynqMP
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+&amba {
+ clk100: clk100 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ clk125: clk125 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ clk200: clk200 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+
+ clk250: clk250 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ };
+
+ clk300: clk300 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <300000000>;
+ };
+
+ clk600: clk600 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <600000000>;
+ };
+
+ dp_aclk: clock0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-accuracy = <100>;
+ };
+
+ dp_aud_clk: clock1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ clock-accuracy = <100>;
+ };
+
+ dpdma_clk: dpdma_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0x0>;
+ clock-frequency = <533000000>;
+ };
+
+ drm_clock: drm_clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0x0>;
+ clock-frequency = <262750000>;
+ clock-accuracy = <0x64>;
+ };
+};
+
+&can0 {
+ clocks = <&clk100 &clk100>;
+};
+
+&can1 {
+ clocks = <&clk100 &clk100>;
+};
+
+&fpd_dma_chan1 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan2 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan3 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan4 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan5 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan6 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan7 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan8 {
+ clocks = <&clk600>, <&clk100>;
+};
+
+&nand0 {
+ clocks = <&clk100 &clk100>;
+};
+
+&gem0 {
+ clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gem1 {
+ clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gem2 {
+ clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gem3 {
+ clocks = <&clk125>, <&clk125>, <&clk125>;
+};
+
+&gpio {
+ clocks = <&clk100>;
+};
+
+&i2c0 {
+ clocks = <&clk100>;
+};
+
+&i2c1 {
+ clocks = <&clk100>;
+};
+
+&qspi {
+ clocks = <&clk300 &clk300>;
+};
+
+&sata {
+ clocks = <&clk250>;
+};
+
+&sdhci0 {
+ clocks = <&clk200 &clk200>;
+};
+
+&sdhci1 {
+ clocks = <&clk200 &clk200>;
+};
+
+&spi0 {
+ clocks = <&clk200 &clk200>;
+};
+
+&spi1 {
+ clocks = <&clk200 &clk200>;
+};
+
+&uart0 {
+ clocks = <&clk100 &clk100>;
+};
+
+&uart1 {
+ clocks = <&clk100 &clk100>;
+};
+
+&usb0 {
+ clocks = <&clk250>, <&clk250>;
+};
+
+&usb1 {
+ clocks = <&clk250>, <&clk250>;
+};
+
+&xilinx_drm {
+ clocks = <&drm_clock>;
+};
+
+&xlnx_dp {
+ clocks = <&dp_aclk>, <&dp_aud_clk>;
+};
+
+&xlnx_dpdma {
+ clocks = <&dpdma_clk>;
+};
+
+&xlnx_dp_snd_codec0 {
+ clocks = <&dp_aud_clk>;
+};
diff --git a/arch/arm/dts/zynqmp-ep108-clk.dtsi b/arch/arm/dts/zynqmp-ep108-clk.dtsi
index f864526..48bb426 100644
--- a/arch/arm/dts/zynqmp-ep108-clk.dtsi
+++ b/arch/arm/dts/zynqmp-ep108-clk.dtsi
@@ -62,6 +62,10 @@
clocks = <&i2c_clk>;
};
+&nand0 {
+ clocks = <&misc_clk &misc_clk>;
+};
+
&qspi {
clocks = <&misc_clk &misc_clk>;
};
diff --git a/arch/arm/dts/zynqmp-ep108.dts b/arch/arm/dts/zynqmp-ep108.dts
index 754604e..0bbf9a7 100644
--- a/arch/arm/dts/zynqmp-ep108.dts
+++ b/arch/arm/dts/zynqmp-ep108.dts
@@ -10,17 +10,21 @@
/dts-v1/;
-/include/ "zynqmp.dtsi"
-/include/ "zynqmp-ep108-clk.dtsi"
+#include "zynqmp.dtsi"
+#include "zynqmp-ep108-clk.dtsi"
/ {
model = "ZynqMP EP108";
aliases {
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
serial0 = &uart0;
spi0 = &qspi;
spi1 = &spi0;
spi2 = &spi1;
+ usb0 = &usb0;
+ usb1 = &usb1;
};
chosen {
@@ -29,7 +33,7 @@
memory {
device_type = "memory";
- reg = <0x0 0x0 0x40000000>;
+ reg = <0x0 0x0 0x0 0x40000000>;
};
};
@@ -69,10 +73,41 @@
};
};
+&nand0 {
+ status = "okay";
+ arasan,has-mdma;
+ num-cs = <1>;
+
+ partition@0 { /* for testing purpose */
+ label = "nand-fsbl-uboot";
+ reg = <0x0 0x0 0x400000>;
+ };
+ partition@1 { /* for testing purpose */
+ label = "nand-linux";
+ reg = <0x0 0x400000 0x1400000>;
+ };
+ partition@2 { /* for testing purpose */
+ label = "nand-device-tree";
+ reg = <0x0 0x1800000 0x400000>;
+ };
+ partition@3 { /* for testing purpose */
+ label = "nand-rootfs";
+ reg = <0x0 0x1C00000 0x1400000>;
+ };
+ partition@4 { /* for testing purpose */
+ label = "nand-bitstream";
+ reg = <0x0 0x3000000 0x400000>;
+ };
+ partition@5 { /* for testing purpose */
+ label = "nand-misc";
+ reg = <0x0 0x3400000 0xFCC00000>;
+ };
+};
+
&qspi {
status = "okay";
flash@0 {
- compatible = "n25q512a11";
+ compatible = "m25p80";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
@@ -101,10 +136,20 @@
&sata {
status = "okay";
ceva,broken-gen2;
+ /* SATA Phy OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+ ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+ ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+ ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+ ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+ ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
};
&sdhci0 {
status = "okay";
+ bus-width = <8>;
};
&sdhci1 {
@@ -151,12 +196,20 @@
&usb0 {
status = "okay";
+};
+
+&dwc3_0 {
+ status = "okay";
dr_mode = "peripheral";
maximum-speed = "high-speed";
};
&usb1 {
status = "okay";
+};
+
+&dwc3_1 {
+ status = "okay";
dr_mode = "host";
maximum-speed = "high-speed";
};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
new file mode 100644
index 0000000..c68a41b
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -0,0 +1,211 @@
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm015-dc1
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+
+/ {
+ model = "ZynqMP zc1751-xm015-dc1 RevA";
+ compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem3;
+ gpio0 = &gpio;
+ i2c0 = &i2c1;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ spi0 = &qspi;
+ usb0 = &usb0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem3 {
+ status = "okay";
+ local-mac-address = [00 0a 35 00 02 90];
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy@0 {
+ reg = <0>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ eeprom@55 {
+ compatible = "at,24c64"; /* 24AA64 */
+ reg = <0x55>;
+ };
+};
+
+&qspi {
+ status = "okay";
+ flash@0 {
+ compatible = "m25p80"; /* Micron MT25QU512ABB8ESF */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ partition@qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ /* SATA phy OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+ ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+ ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+ ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+};
+
+/* eMMC */
+&sdhci0 {
+ status = "okay";
+ bus-width = <8>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+ status = "okay";
+ no-1-8-v; /* for 1.0 silicon */
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&xilinx_drm {
+ status = "okay";
+};
+
+&xlnx_dp {
+ status = "okay";
+};
+
+&xlnx_dp_sub {
+ status = "okay";
+ xlnx,vid-clk-pl;
+};
+
+&xlnx_dp_snd_pcm0 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm1 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_card {
+ status = "okay";
+};
+
+&xlnx_dp_snd_codec0 {
+ status = "okay";
+};
+
+&xlnx_dpdma {
+ status = "okay";
+};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
new file mode 100644
index 0000000..3fdfcc8
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -0,0 +1,236 @@
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm016-dc2
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+
+/ {
+ model = "ZynqMP zc1751-xm016-dc2 RevA";
+ compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+ aliases {
+ can0 = &can0;
+ can1 = &can1;
+ ethernet0 = &gem2;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ usb0 = &usb1;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem2 {
+ status = "okay";
+ local-mac-address = [00 0a 35 00 02 90];
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy@5 {
+ reg = <5>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tca6416_u26: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* IRQ not connected */
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&nand0 {
+ status = "okay";
+ arasan,has-mdma;
+ num-cs = <2>;
+
+ partition@0 { /* for testing purpose */
+ label = "nand-fsbl-uboot";
+ reg = <0x0 0x0 0x400000>;
+ };
+ partition@1 { /* for testing purpose */
+ label = "nand-linux";
+ reg = <0x0 0x400000 0x1400000>;
+ };
+ partition@2 { /* for testing purpose */
+ label = "nand-device-tree";
+ reg = <0x0 0x1800000 0x400000>;
+ };
+ partition@3 { /* for testing purpose */
+ label = "nand-rootfs";
+ reg = <0x0 0x1C00000 0x1400000>;
+ };
+ partition@4 { /* for testing purpose */
+ label = "nand-bitstream";
+ reg = <0x0 0x3000000 0x400000>;
+ };
+ partition@5 { /* for testing purpose */
+ label = "nand-misc";
+ reg = <0x0 0x3400000 0xFCC00000>;
+ };
+
+ partition@6 { /* for testing purpose */
+ label = "nand1-fsbl-uboot";
+ reg = <0x1 0x0 0x400000>;
+ };
+ partition@7 { /* for testing purpose */
+ label = "nand1-linux";
+ reg = <0x1 0x400000 0x1400000>;
+ };
+ partition@8 { /* for testing purpose */
+ label = "nand1-device-tree";
+ reg = <0x1 0x1800000 0x400000>;
+ };
+ partition@9 { /* for testing purpose */
+ label = "nand1-rootfs";
+ reg = <0x1 0x1C00000 0x1400000>;
+ };
+ partition@10 { /* for testing purpose */
+ label = "nand1-bitstream";
+ reg = <0x1 0x3000000 0x400000>;
+ };
+ partition@11 { /* for testing purpose */
+ label = "nand1-misc";
+ reg = <0x1 0x3400000 0xFCC00000>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <1>;
+ spi0_flash0: spi0_flash0@0 {
+ compatible = "m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ spi0_flash0@00000000 {
+ label = "spi0_flash0";
+ reg = <0x0 0x100000>;
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ num-cs = <1>;
+ spi1_flash0: spi1_flash0@0 {
+ compatible = "mtd_dataflash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+
+ spi1_flash0@00000000 {
+ label = "spi1_flash0";
+ reg = <0x0 0x84000>;
+ };
+ };
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
new file mode 100644
index 0000000..d754f9f
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
@@ -0,0 +1,121 @@
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm019-dc5
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+/ {
+ model = "ZynqMP zc1751-xm019-dc5 RevA";
+ compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem1;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci0;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ bootargs = "earlycon=cdns,mmio,0xff000000,115200n8";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem1 {
+ status = "okay";
+ local-mac-address = [00 0a 35 00 02 90];
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy@0 {
+ reg = <0>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+/* FIXME: Add device */
+&i2c0 {
+ status = "okay";
+};
+
+/* FIXME: Add device */
+&i2c1 {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&watchdog0 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts
new file mode 100644
index 0000000..765108e
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zcu102-revB.dts
@@ -0,0 +1,42 @@
+/*
+ * dts file for Xilinx ZynqMP ZCU102 RevB
+ *
+ * (C) Copyright 2016, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include "zynqmp-zcu102.dts"
+
+/ {
+ model = "ZynqMP ZCU102 RevB";
+};
+
+&gem3 {
+ phy-handle = <&phyc>;
+ phyc: phy@c {
+ reg = <0xc>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ };
+ /* Cleanup from RevA */
+ /delete-node/ phy@21;
+};
+
+/* Different qspi 512Mbit version */
+
+/* Fix collision with u61 */
+&i2c0 {
+ i2cswitch@75 {
+ i2c@2 {
+ max15303@1b { /* u8 */
+ compatible = "max15303";
+ reg = <0x1b>;
+ };
+ /delete-node/ max15303@20;
+ };
+ };
+};
diff --git a/arch/arm/dts/zynqmp-zcu102.dts b/arch/arm/dts/zynqmp-zcu102.dts
new file mode 100644
index 0000000..de99602
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zcu102.dts
@@ -0,0 +1,631 @@
+/*
+ * dts file for Xilinx ZynqMP ZCU102
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+
+/ {
+ model = "ZynqMP ZCU102 RevA";
+ compatible = "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem3;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci1;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &qspi;
+ usb0 = &usb0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+&can1 {
+ status = "okay";
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem3 {
+ status = "okay";
+ local-mac-address = [00 0a 35 00 02 90];
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy@21 {
+ reg = <21>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tca6416_u97: gpio@20 {
+ /*
+ * Enable all GTs to out from U-Boot
+ * i2c mw 20 6 0 - setup IO to output
+ * i2c mw 20 2 ef - setup output values on pins 0-7
+ * i2c mw 20 3 ff - setup output values on pins 10-17
+ */
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /*
+ * IRQ not connected
+ * Lines:
+ * 0 - PS_GTR_LAN_SEL0
+ * 1 - PS_GTR_LAN_SEL1
+ * 2 - PS_GTR_LAN_SEL2
+ * 3 - PS_GTR_LAN_SEL3
+ * 4 - PCI_CLK_DIR_SEL
+ * 5 - IIC_MUX_RESET_B
+ * 6 - GEM3_EXP_RESET_B
+ * 7, 10 - 17 - not connected
+ */
+
+ gtr_sel0 {
+ gpio-hog;
+ gpios = <0 0>;
+ output-high; /* PCIE = 0, DP = 1 */
+ line-name = "sel0";
+ };
+ gtr_sel1 {
+ gpio-hog;
+ gpios = <1 0>;
+ output-high; /* PCIE = 0, DP = 1 */
+ line-name = "sel1";
+ };
+ gtr_sel2 {
+ gpio-hog;
+ gpios = <2 0>;
+ output-high; /* PCIE = 0, USB0 = 1 */
+ line-name = "sel2";
+ };
+ gtr_sel3 {
+ gpio-hog;
+ gpios = <3 0>;
+ output-high; /* PCIE = 0, SATA = 1 */
+ line-name = "sel3";
+ };
+ };
+
+ tca6416_u61: gpio@21 { /* FIXME enable it by i2c mw 21 6 0 */
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /*
+ * IRQ not connected
+ * Lines:
+ * 0 - VCCPSPLL_EN
+ * 1 - MGTRAVCC_EN
+ * 2 - MGTRAVTT_EN
+ * 3 - VCCPSDDRPLL_EN
+ * 4 - MIO26_PMU_INPUT_LS
+ * 5 - PL_PMBUS_ALERT
+ * 6 - PS_PMBUS_ALERT
+ * 7 - MAXIM_PMBUS_ALERT
+ * 10 - PL_DDR4_VTERM_EN
+ * 11 - PL_DDR4_VPP_2V5_EN
+ * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
+ * 13 - PS_DIMM_SUSPEND_EN
+ * 14 - PS_DDR4_VTERM_EN
+ * 15 - PS_DDR4_VPP_2V5_EN
+ * 16 - 17 - not connected
+ */
+ };
+
+ i2cswitch@75 { /* u60 */
+ compatible = "nxp,pca9544";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ i2c@0 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* PS_PMBUS */
+ ina226@40 { /* u76 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <5000>;
+ };
+ ina226@41 { /* u77 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ ina226@42 { /* u78 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>;
+ };
+ ina226@43 { /* u87 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ ina226@44 { /* u85 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>;
+ };
+ ina226@45 { /* u86 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ ina226@46 { /* u93 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <5000>;
+ };
+ ina226@47 { /* u88 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <5000>;
+ };
+ ina226@4a { /* u15 */
+ compatible = "ti,ina226";
+ reg = <0x4a>;
+ shunt-resistor = <5000>;
+ };
+ ina226@4b { /* u92 */
+ compatible = "ti,ina226";
+ reg = <0x4b>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@1 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* PL_PMBUS */
+ ina226@40 { /* u79 */
+ compatible = "ti,ina226";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+ ina226@41 { /* u81 */
+ compatible = "ti,ina226";
+ reg = <0x41>;
+ shunt-resistor = <5000>;
+ };
+ ina226@42 { /* u80 */
+ compatible = "ti,ina226";
+ reg = <0x42>;
+ shunt-resistor = <5000>;
+ };
+ ina226@43 { /* u84 */
+ compatible = "ti,ina226";
+ reg = <0x43>;
+ shunt-resistor = <5000>;
+ };
+ ina226@44 { /* u16 */
+ compatible = "ti,ina226";
+ reg = <0x44>;
+ shunt-resistor = <5000>;
+ };
+ ina226@45 { /* u65 */
+ compatible = "ti,ina226";
+ reg = <0x45>;
+ shunt-resistor = <5000>;
+ };
+ ina226@46 { /* u74 */
+ compatible = "ti,ina226";
+ reg = <0x46>;
+ shunt-resistor = <5000>;
+ };
+ ina226@47 { /* u75 */
+ compatible = "ti,ina226";
+ reg = <0x47>;
+ shunt-resistor = <5000>;
+ };
+ };
+ i2c@2 { /* i2c mw 75 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* MAXIM_PMBUS - 00 */
+ max15301@a { /* u46 */
+ compatible = "max15301";
+ reg = <0xa>;
+ };
+ max15303@b { /* u4 */
+ compatible = "max15303";
+ reg = <0xb>;
+ };
+ max15303@10 { /* u13 */
+ compatible = "max15303";
+ reg = <0x10>;
+ };
+ max15301@13 { /* u47 */
+ compatible = "max15301";
+ reg = <0x13>;
+ };
+ max15303@14 { /* u7 */
+ compatible = "max15303";
+ reg = <0x14>;
+ };
+ max15303@15 { /* u6 */
+ compatible = "max15303";
+ reg = <0x15>;
+ };
+ max15303@16 { /* u10 */
+ compatible = "max15303";
+ reg = <0x16>;
+ };
+ max15303@17 { /* u9 */
+ compatible = "max15303";
+ reg = <0x17>;
+ };
+ max15301@18 { /* u63 */
+ compatible = "max15301";
+ reg = <0x18>;
+ };
+ max15303@1a { /* u49 */
+ compatible = "max15303";
+ reg = <0x1a>;
+ };
+ max15303@1d { /* u18 */
+ compatible = "max15303";
+ reg = <0x1d>;
+ };
+ max15303@20 { /* u8 */
+ compatible = "max15303";
+ status = "disabled"; /* unreachable */
+ reg = <0x20>;
+ };
+
+/* drivers/hwmon/pmbus/Kconfig:86: be called max20751.
+drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
+*/
+ max20751@72 { /* u95 FIXME - not detected */
+ compatible = "max20751";
+ reg = <0x72>;
+ };
+ max20751@73 { /* u96 FIXME - not detected */
+ compatible = "max20751";
+ reg = <0x73>;
+ };
+ };
+ /* Bus 3 is not connected */
+ };
+
+ /* FIXME PL connection - u55 , PMOD - j160 */
+ /* FIXME MSP430F - u41 - not detected */
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ /* FIXME PL i2c via PCA9306 - u45 */
+ /* FIXME MSP430 - u41 - not detected */
+ i2cswitch@74 { /* u34 */
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x74>;
+ i2c@0 { /* i2c mw 74 0 1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /*
+ * IIC_EEPROM 1kB memory which uses 256B blocks
+ * where every block has different address.
+ * 0 - 256B address 0x54
+ * 256B - 512B address 0x55
+ * 512B - 768B address 0x56
+ * 768B - 1024B address 0x57
+ */
+ eeprom@54 { /* u23 */
+ compatible = "at,24c08";
+ reg = <0x54>;
+ };
+ };
+ i2c@1 { /* i2c mw 74 0 2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ si5341: clock-generator1@36 { /* SI5341 - u69 */
+ compatible = "si5341";
+ reg = <0x36>;
+ };
+
+ };
+ i2c@2 { /* i2c mw 74 0 4 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ si570_1: clock-generator2@5d { /* USER SI570 - u42 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>;
+ factory-fout = <300000000>;
+ clock-frequency = <300000000>;
+ };
+ };
+ i2c@3 { /* i2c mw 74 0 8 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ si570_2: clock-generator3@5d { /* USER MGT SI570 - u56 */
+ #clock-cells = <0>;
+ compatible = "silabs,si570";
+ reg = <0x5d>;
+ temperature-stability = <50>; /* copy from zc702 */
+ factory-fout = <156250000>;
+ clock-frequency = <148500000>;
+ };
+ };
+ i2c@4 { /* i2c mw 74 0 10 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ si5328: clock-generator4@69 {/* SI5328 - u20 */
+ compatible = "silabs,si5328";
+ reg = <0x69>;
+ };
+ };
+ /* 5 - 7 unconnected */
+ };
+
+ i2cswitch@75 {
+ compatible = "nxp,pca9548"; /* u135 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ /* HPC0_IIC */
+ };
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ /* HPC1_IIC */
+ };
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ /* SYSMON */
+ };
+ i2c@3 { /* i2c mw 75 0 8 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ /* DDR4 SODIMM */
+ dev@19 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x19>;
+ };
+ dev@30 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x30>;
+ };
+ dev@35 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x35>;
+ };
+ dev@36 { /* u-boot detection */
+ compatible = "xxx";
+ reg = <0x36>;
+ };
+ dev@51 { /* u-boot detection - maybe SPD */
+ compatible = "xxx";
+ reg = <0x51>;
+ };
+ };
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ /* SEP 3 */
+ };
+ i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ /* SEP 2 */
+ };
+ i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ /* SEP 1 */
+ };
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ /* SEP 0 */
+ };
+ };
+};
+
+&pcie {
+/* status = "okay"; */
+};
+
+&qspi {
+ status = "okay";
+ is-dual = <1>;
+ flash@0 {
+ compatible = "m25p80"; /* 32MB */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ partition@qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ /* SATA OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+ ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+ status = "okay";
+ no-1-8-v; /* for 1.0 silicon */
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+};
+
+&dwc3_0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&xilinx_drm {
+ status = "okay";
+ clocks = <&si570_1>;
+};
+
+&xlnx_dp {
+ status = "okay";
+};
+
+&xlnx_dp_sub {
+ status = "okay";
+ xlnx,vid-clk-pl;
+};
+
+&xlnx_dp_snd_pcm0 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm1 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_card {
+ status = "okay";
+};
+
+&xlnx_dp_snd_codec0 {
+ status = "okay";
+};
+
+&xlnx_dpdma {
+ status = "okay";
+};
diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi
index 8733604..fb95b48 100644
--- a/arch/arm/dts/zynqmp.dtsi
+++ b/arch/arm/dts/zynqmp.dtsi
@@ -10,7 +10,7 @@
/ {
compatible = "xlnx,zynqmp";
#address-cells = <2>;
- #size-cells = <1>;
+ #size-cells = <2>;
cpus {
#address-cells = <1>;
@@ -45,8 +45,179 @@
};
};
+ power-domains {
+ compatible = "xlnx,zynqmp-genpd";
+
+ pd_usb0: pd-usb0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x16>;
+ };
+
+ pd_usb1: pd-usb1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x17>;
+ };
+
+ pd_sata: pd-sata {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1c>;
+ };
+
+ pd_spi0: pd-spi0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x23>;
+ };
+
+ pd_spi1: pd-spi1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x24>;
+ };
+
+ pd_uart0: pd-uart0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x21>;
+ };
+
+ pd_uart1: pd-uart1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x22>;
+ };
+
+ pd_eth0: pd-eth0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1d>;
+ };
+
+ pd_eth1: pd-eth1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1e>;
+ };
+
+ pd_eth2: pd-eth2 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1f>;
+ };
+
+ pd_eth3: pd-eth3 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x20>;
+ };
+
+ pd_i2c0: pd-i2c0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x25>;
+ };
+
+ pd_i2c1: pd-i2c1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x26>;
+ };
+
+ pd_dp: pd-dp {
+ /* fixme: what to attach to */
+ #power-domain-cells = <0x0>;
+ pd-id = <0x29>;
+ };
+
+ pd_gdma: pd-gdma {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2a>;
+ };
+
+ pd_adma: pd-adma {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2b>;
+ };
+
+ pd_ttc0: pd-ttc0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x18>;
+ };
+
+ pd_ttc1: pd-ttc1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x19>;
+ };
+
+ pd_ttc2: pd-ttc2 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1a>;
+ };
+
+ pd_ttc3: pd-ttc3 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x1b>;
+ };
+
+ pd_sd0: pd-sd0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x27>;
+ };
+
+ pd_sd1: pd-sd1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x28>;
+ };
+
+ pd_nand: pd-nand {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2c>;
+ };
+
+ pd_qspi: pd-qspi {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2d>;
+ };
+
+ pd_gpio: pd-gpio {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2e>;
+ };
+
+ pd_can0: pd-can0 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x2f>;
+ };
+
+ pd_can1: pd-can1 {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x30>;
+ };
+
+ pd_ddr: pd-ddr {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x37>;
+ };
+
+ pd_apll: pd-apll {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x32>;
+ };
+
+ pd_vpll: pd-vpll {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x33>;
+ };
+
+ pd_dpll: pd-dpll {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x34>;
+ };
+
+ pd_rpll: pd-rpll {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x35>;
+ };
+
+ pd_iopll: pd-iopll {
+ #power-domain-cells = <0x0>;
+ pd-id = <0x36>;
+ };
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
+ interrupt-parent = <&gic>;
interrupts = <0 143 4>,
<0 144 4>,
<0 145 4>,
@@ -76,7 +247,7 @@
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
- ranges;
+ ranges = <0 0 0 0 0xffffffff>;
gic: interrupt-controller@f9010000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
@@ -95,7 +266,7 @@
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
- ranges;
+ ranges = <0 0 0 0 0xffffffff>;
can0: can@ff060000 {
compatible = "xlnx,zynq-can-1.0";
@@ -106,6 +277,7 @@
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
+ power-domains = <&pd_can0>;
};
can1: can@ff070000 {
@@ -117,6 +289,26 @@
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
+ power-domains = <&pd_can1>;
+ };
+
+ cci: cci@fd6e0000 {
+ compatible = "arm,cci-400";
+ reg = <0x0 0xfd6e0000 0x9000>;
+ ranges = <0x0 0x0 0xfd6e0000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pmu@9000 {
+ compatible = "arm,cci-400-pmu,r1";
+ reg = <0x9000 0x5000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 123 4>,
+ <0 123 4>,
+ <0 123 4>,
+ <0 123 4>,
+ <0 123 4>;
+ };
};
/* GDMA */
@@ -126,8 +318,10 @@
reg = <0x0 0xfd500000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 124 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <0>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
fpd_dma_chan2: dma@fd510000 {
@@ -136,8 +330,10 @@
reg = <0x0 0xfd510000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 125 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <1>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
fpd_dma_chan3: dma@fd520000 {
@@ -146,8 +342,10 @@
reg = <0x0 0xfd520000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 126 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <2>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
fpd_dma_chan4: dma@fd530000 {
@@ -156,8 +354,10 @@
reg = <0x0 0xfd530000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 127 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <3>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
fpd_dma_chan5: dma@fd540000 {
@@ -166,8 +366,10 @@
reg = <0x0 0xfd540000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 128 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <4>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
fpd_dma_chan6: dma@fd550000 {
@@ -176,8 +378,10 @@
reg = <0x0 0xfd550000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 129 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <5>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
fpd_dma_chan7: dma@fd560000 {
@@ -186,8 +390,10 @@
reg = <0x0 0xfd560000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 130 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <6>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
fpd_dma_chan8: dma@fd570000 {
@@ -196,8 +402,10 @@
reg = <0x0 0xfd570000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 131 4>;
+ clock-names = "clk_main", "clk_apb";
xlnx,id = <7>;
xlnx,bus-width = <128>;
+ power-domains = <&pd_gdma>;
};
gpu: gpu@fd4b0000 {
@@ -218,6 +426,7 @@
interrupts = <0 77 4>;
xlnx,id = <0>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
};
lpd_dma_chan2: dma@ffa90000 {
@@ -228,6 +437,7 @@
interrupts = <0 78 4>;
xlnx,id = <1>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
};
lpd_dma_chan3: dma@ffaa0000 {
@@ -238,6 +448,7 @@
interrupts = <0 79 4>;
xlnx,id = <2>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
};
lpd_dma_chan4: dma@ffab0000 {
@@ -248,6 +459,7 @@
interrupts = <0 80 4>;
xlnx,id = <3>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
};
lpd_dma_chan5: dma@ffac0000 {
@@ -258,6 +470,7 @@
interrupts = <0 81 4>;
xlnx,id = <4>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
};
lpd_dma_chan6: dma@ffad0000 {
@@ -268,6 +481,7 @@
interrupts = <0 82 4>;
xlnx,id = <5>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
};
lpd_dma_chan7: dma@ffae0000 {
@@ -278,6 +492,7 @@
interrupts = <0 83 4>;
xlnx,id = <6>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
};
lpd_dma_chan8: dma@ffaf0000 {
@@ -288,6 +503,14 @@
interrupts = <0 84 4>;
xlnx,id = <7>;
xlnx,bus-width = <64>;
+ power-domains = <&pd_adma>;
+ };
+
+ mc: memory-controller@fd070000 {
+ compatible = "xlnx,zynqmp-ddrc-2.40a";
+ reg = <0x0 0xfd070000 0x30000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 112 4>;
};
nand0: nand@ff100000 {
@@ -299,10 +522,11 @@
interrupts = <0 14 4>;
#address-cells = <2>;
#size-cells = <1>;
+ power-domains = <&pd_nand>;
};
gem0: ethernet@ff0b0000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynqmp-gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 57 4>, <0 57 4>;
@@ -310,12 +534,12 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
- jumbo-max-len = <10240>;
- jumbo-supported;
+ #stream-id-cells = <1>;
+ power-domains = <&pd_eth0>;
};
gem1: ethernet@ff0c0000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynqmp-gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 59 4>, <0 59 4>;
@@ -323,12 +547,12 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
- jumbo-max-len = <10240>;
- jumbo-supported;
+ #stream-id-cells = <1>;
+ power-domains = <&pd_eth1>;
};
gem2: ethernet@ff0d0000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynqmp-gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 61 4>, <0 61 4>;
@@ -336,12 +560,12 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
- jumbo-max-len = <10240>;
- jumbo-supported;
+ #stream-id-cells = <1>;
+ power-domains = <&pd_eth2>;
};
gem3: ethernet@ff0e0000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynqmp-gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 63 4>, <0 63 4>;
@@ -349,17 +573,20 @@
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
- jumbo-max-len = <10240>;
- jumbo-supported;
+ #stream-id-cells = <1>;
+ power-domains = <&pd_eth3>;
};
gpio: gpio@ff0a0000 {
compatible = "xlnx,zynqmp-gpio-1.0";
status = "disabled";
#gpio-cells = <0x2>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <0 16 4>;
reg = <0x0 0xff0a0000 0x1000>;
+ power-domains = <&pd_gpio>;
};
i2c0: i2c@ff020000 {
@@ -370,6 +597,7 @@
reg = <0x0 0xff020000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&pd_i2c0>;
};
i2c1: i2c@ff030000 {
@@ -380,6 +608,7 @@
reg = <0x0 0xff030000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&pd_i2c1>;
};
pcie: pcie@fd0e0000 {
@@ -390,16 +619,26 @@
#interrupt-cells = <1>;
device_type = "pci";
interrupt-parent = <&gic>;
- interrupts = < 0 118 4>,
- < 0 116 4>,
- < 0 115 4>, /* MSI_1 [63...32] */
- < 0 114 4 >; /* MSI_0 [31...0] */
+ interrupts = <0 118 4>,
+ <0 116 4>,
+ <0 115 4>, /* MSI_1 [63...32] */
+ <0 114 4>; /* MSI_0 [31...0] */
interrupt-names = "misc", "intx", "msi_1", "msi_0";
reg = <0x0 0xfd0e0000 0x1000>,
<0x0 0xfd480000 0x1000>,
<0x0 0xe0000000 0x1000000>;
reg-names = "breg", "pcireg", "cfg";
ranges = <0x02000000 0x00000000 0xe1000000 0x00000000 0xe1000000 0 0x0f000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+ pcie_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
};
qspi: spi@ff0f0000 {
@@ -409,9 +648,11 @@
interrupts = <0 15 4>;
interrupt-parent = <&gic>;
num-cs = <1>;
- reg = <0x0 0xff0f0000 0x1000 0x0 0xc0000000 0x8000000>;
+ reg = <0x0 0xff0f0000 0x1000>,
+ <0x0 0xc0000000 0x8000000>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&pd_qspi>;
};
rtc: rtc@ffa60000 {
@@ -429,6 +670,7 @@
reg = <0x0 0xfd0c0000 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
+ power-domains = <&pd_sata>;
};
sdhci0: sdhci@ff160000 {
@@ -438,6 +680,8 @@
interrupts = <0 48 4>;
reg = <0x0 0xff160000 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ broken-tuning;
+ power-domains = <&pd_sd0>;
};
sdhci1: sdhci@ff170000 {
@@ -447,6 +691,8 @@
interrupts = <0 49 4>;
reg = <0x0 0xff170000 0x1000>;
clock-names = "clk_xin", "clk_ahb";
+ broken-tuning;
+ power-domains = <&pd_sd1>;
};
smmu: smmu@fd800000 {
@@ -454,11 +700,15 @@
reg = <0x0 0xfd800000 0x20000>;
#global-interrupts = <1>;
interrupt-parent = <&gic>;
- interrupts = <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>,
- <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>;
+ interrupts = <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
+ <0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>;
+ mmu-masters = < &gem0 0x874
+ &gem1 0x875
+ &gem2 0x876
+ &gem3 0x877 >;
};
spi0: spi@ff040000 {
@@ -470,6 +720,7 @@
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&pd_spi0>;
};
spi1: spi@ff050000 {
@@ -481,6 +732,7 @@
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&pd_spi1>;
};
ttc0: timer@ff110000 {
@@ -490,6 +742,7 @@
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
reg = <0x0 0xff110000 0x1000>;
timer-width = <32>;
+ power-domains = <&pd_ttc0>;
};
ttc1: timer@ff120000 {
@@ -499,6 +752,7 @@
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
reg = <0x0 0xff120000 0x1000>;
timer-width = <32>;
+ power-domains = <&pd_ttc1>;
};
ttc2: timer@ff130000 {
@@ -508,6 +762,7 @@
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
reg = <0x0 0xff130000 0x1000>;
timer-width = <32>;
+ power-domains = <&pd_ttc2>;
};
ttc3: timer@ff140000 {
@@ -517,42 +772,69 @@
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
reg = <0x0 0xff140000 0x1000>;
timer-width = <32>;
+ power-domains = <&pd_ttc3>;
};
uart0: serial@ff000000 {
- compatible = "cdns,uart-r1p12";
+ compatible = "cdns,uart-r1p12", "xlnx,xuartps";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 21 4>;
reg = <0x0 0xff000000 0x1000>;
clock-names = "uart_clk", "pclk";
+ power-domains = <&pd_uart0>;
};
uart1: serial@ff010000 {
- compatible = "cdns,uart-r1p12";
+ compatible = "cdns,uart-r1p12", "xlnx,xuartps";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 22 4>;
reg = <0x0 0xff010000 0x1000>;
clock-names = "uart_clk", "pclk";
+ power-domains = <&pd_uart1>;
};
usb0: usb@fe200000 {
- compatible = "snps,dwc3";
+ #address-cells = <2>;
+ #size-cells = <1>;
status = "disabled";
- interrupt-parent = <&gic>;
- interrupts = <0 65 4>;
- reg = <0x0 0xfe200000 0x40000>;
- clock-names = "clk_xin", "clk_ahb";
+ compatible = "xlnx,zynqmp-dwc3";
+ clock-names = "bus_clk", "ref_clk";
+ clocks = <&clk125>, <&clk125>;
+ power-domains = <&pd_usb0>;
+ ranges;
+
+ dwc3_0: dwc3@fe200000 {
+ compatible = "snps,dwc3";
+ status = "disabled";
+ reg = <0x0 0xfe200000 0x40000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 65 4>;
+ /* snps,quirk-frame-length-adjustment = <0x20>; */
+ snps,refclk_fladj;
+ };
};
usb1: usb@fe300000 {
- compatible = "snps,dwc3";
+ #address-cells = <2>;
+ #size-cells = <1>;
status = "disabled";
- interrupt-parent = <&gic>;
- interrupts = <0 70 4>;
- reg = <0x0 0xfe300000 0x40000>;
- clock-names = "clk_xin", "clk_ahb";
+ compatible = "xlnx,zynqmp-dwc3";
+ clock-names = "bus_clk", "ref_clk";
+ clocks = <&clk125>, <&clk125>;
+ power-domains = <&pd_usb1>;
+ ranges;
+
+ dwc3_1: dwc3@fe300000 {
+ compatible = "snps,dwc3";
+ status = "disabled";
+ reg = <0x0 0xfe300000 0x40000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 70 4>;
+ /* snps,quirk-frame-length-adjustment = <0x20>; */
+ snps,refclk_fladj;
+ };
};
watchdog0: watchdog@fd4d0000 {
@@ -583,10 +865,11 @@
};
};
- xlnx_dp: dp@43c00000 {
+ xlnx_dp: dp@fd4a0000 {
compatible = "xlnx,v-dp";
status = "disabled";
- reg = <0x0 0xfd4a0000 0x1000>;
+ reg = <0x0 0xfd4a0000 0x1000>,
+ <0x0 0xfd400000 0x20000>;
interrupts = <0 119 4>;
interrupt-parent = <&gic>;
clock-names = "aclk", "aud_clk";
@@ -599,6 +882,7 @@
xlnx,bpc = <8>;
xlnx,audio-chan = <2>;
xlnx,dp-sub = <&xlnx_dp_sub>;
+ xlnx,max-pclock-frequency = <300000>;
};
xlnx_dp_snd_card: dp_snd_card {
@@ -628,12 +912,16 @@
dma-names = "tx";
};
- xlnx_dp_sub: dp_sub@43c0a000 {
+ xlnx_dp_sub: dp_sub@fd4aa000 {
compatible = "xlnx,dp-sub";
status = "disabled";
- reg = <0x0 0xfd4aa000 0x1000>, <0x0 0xfd4ab000 0x1000>, <0x0 0xfd4ac000 0x1000>;
+ reg = <0x0 0xfd4aa000 0x1000>,
+ <0x0 0xfd4ab000 0x1000>,
+ <0x0 0xfd4ac000 0x1000>;
reg-names = "blend", "av_buf", "aud";
xlnx,output-fmt = "rgb";
+ xlnx,vid-fmt = "yuyv";
+ xlnx,gfx-fmt = "rgb565";
};
xlnx_dpdma: dma@fd4c0000 {
@@ -645,22 +933,22 @@
clock-names = "axi_clk";
dma-channels = <6>;
#dma-cells = <1>;
- dma-video0channel@43c10000 {
+ dma-video0channel@fd4c0000 {
compatible = "xlnx,video0";
};
- dma-video1channel@43c10000 {
+ dma-video1channel@fd4c0000 {
compatible = "xlnx,video1";
};
- dma-video2channel@43c10000 {
+ dma-video2channel@fd4c0000 {
compatible = "xlnx,video2";
};
- dma-graphicschannel@43c10000 {
+ dma-graphicschannel@fd4c0000 {
compatible = "xlnx,graphics";
};
- dma-audio0channel@43c10000 {
+ dma-audio0channel@fd4c0000 {
compatible = "xlnx,audio0";
};
- dma-audio1channel@43c10000 {
+ dma-audio1channel@fd4c0000 {
compatible = "xlnx,audio1";
};
};
generated by cgit v1.1 at 2024-12-12 02:20:17 +0000