diff options
Diffstat (limited to 'arch/arm/cpu')
-rw-r--r-- | arch/arm/cpu/armv7/am33xx/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 95 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/am33xx/clock_ti816x.c | 445 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/am33xx/emif4.c | 6 |
4 files changed, 452 insertions, 95 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile index bd8e752..f6a297c 100644 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -16,6 +16,7 @@ ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX),) COBJS += clock.o endif +COBJS-$(CONFIG_TI816X) += clock_ti816x.o COBJS += sys_info.o COBJS += mem.o COBJS += ddr.o diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c index 93c7f7b..ef14f47 100644 --- a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c +++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c @@ -100,103 +100,8 @@ struct ad_pll { #define OSC_SRC_CTRL (PLL_SUBSYS_BASE + 0x2C0) -/* PRCM */ #define ENET_CLKCTRL_CMPL 0x30000 -#define CM_DEFAULT_BASE (PRCM_BASE + 0x0500) - -struct cm_def { - unsigned int resv0[2]; - unsigned int l3fastclkstctrl; - unsigned int resv1[1]; - unsigned int pciclkstctrl; - unsigned int resv2[1]; - unsigned int ducaticlkstctrl; - unsigned int resv3[1]; - unsigned int emif0clkctrl; - unsigned int emif1clkctrl; - unsigned int dmmclkctrl; - unsigned int fwclkctrl; - unsigned int resv4[10]; - unsigned int usbclkctrl; - unsigned int resv5[1]; - unsigned int sataclkctrl; - unsigned int resv6[4]; - unsigned int ducaticlkctrl; - unsigned int pciclkctrl; -}; - -#define CM_ALWON_BASE (PRCM_BASE + 0x1400) - -struct cm_alwon { - unsigned int l3slowclkstctrl; - unsigned int ethclkstctrl; - unsigned int l3medclkstctrl; - unsigned int mmu_clkstctrl; - unsigned int mmucfg_clkstctrl; - unsigned int ocmc0clkstctrl; - unsigned int vcpclkstctrl; - unsigned int mpuclkstctrl; - unsigned int sysclk4clkstctrl; - unsigned int sysclk5clkstctrl; - unsigned int sysclk6clkstctrl; - unsigned int rtcclkstctrl; - unsigned int l3fastclkstctrl; - unsigned int resv0[67]; - unsigned int mcasp0clkctrl; - unsigned int mcasp1clkctrl; - unsigned int mcasp2clkctrl; - unsigned int mcbspclkctrl; - unsigned int uart0clkctrl; - unsigned int uart1clkctrl; - unsigned int uart2clkctrl; - unsigned int gpio0clkctrl; - unsigned int gpio1clkctrl; - unsigned int i2c0clkctrl; - unsigned int i2c1clkctrl; - unsigned int mcasp345clkctrl; - unsigned int atlclkctrl; - unsigned int mlbclkctrl; - unsigned int pataclkctrl; - unsigned int resv1[1]; - unsigned int uart3clkctrl; - unsigned int uart4clkctrl; - unsigned int uart5clkctrl; - unsigned int wdtimerclkctrl; - unsigned int spiclkctrl; - unsigned int mailboxclkctrl; - unsigned int spinboxclkctrl; - unsigned int mmudataclkctrl; - unsigned int resv2[2]; - unsigned int mmucfgclkctrl; - unsigned int resv3[2]; - unsigned int ocmc0clkctrl; - unsigned int vcpclkctrl; - unsigned int resv4[2]; - unsigned int controlclkctrl; - unsigned int resv5[2]; - unsigned int gpmcclkctrl; - unsigned int ethernet0clkctrl; - unsigned int ethernet1clkctrl; - unsigned int mpuclkctrl; - unsigned int debugssclkctrl; - unsigned int l3clkctrl; - unsigned int l4hsclkctrl; - unsigned int l4lsclkctrl; - unsigned int rtcclkctrl; - unsigned int tpccclkctrl; - unsigned int tptc0clkctrl; - unsigned int tptc1clkctrl; - unsigned int tptc2clkctrl; - unsigned int tptc3clkctrl; - unsigned int resv7[4]; - unsigned int dcan01clkctrl; - unsigned int mmchs0clkctrl; - unsigned int mmchs1clkctrl; - unsigned int mmchs2clkctrl; - unsigned int custefuseclkctrl; -}; - #define SATA_PLL_BASE (CTRL_BASE + 0x0720) struct sata_pll { diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti816x.c b/arch/arm/cpu/armv7/am33xx/clock_ti816x.c new file mode 100644 index 0000000..ace4a5a --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/clock_ti816x.c @@ -0,0 +1,445 @@ +/* + * clock_ti816x.c + * + * Clocks for TI816X based boards + * + * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> + * Antoine Tenart, <atenart@adeneo-embedded.com> + * + * Based on TI-PSP-04.00.02.14 : + * + * Copyright (C) 2009, Texas Instruments, Incorporated + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> + +#include <asm/emif.h> + +#define CM_PLL_BASE (CTRL_BASE + 0x0400) + +/* Main PLL */ +#define MAIN_N 64 +#define MAIN_P 0x1 +#define MAIN_INTFREQ1 0x8 +#define MAIN_FRACFREQ1 0x800000 +#define MAIN_MDIV1 0x2 +#define MAIN_INTFREQ2 0xE +#define MAIN_FRACFREQ2 0x0 +#define MAIN_MDIV2 0x1 +#define MAIN_INTFREQ3 0x8 +#define MAIN_FRACFREQ3 0xAAAAB0 +#define MAIN_MDIV3 0x3 +#define MAIN_INTFREQ4 0x9 +#define MAIN_FRACFREQ4 0x55554F +#define MAIN_MDIV4 0x3 +#define MAIN_INTFREQ5 0x9 +#define MAIN_FRACFREQ5 0x374BC6 +#define MAIN_MDIV5 0xC +#define MAIN_MDIV6 0x48 +#define MAIN_MDIV7 0x4 + +/* DDR PLL */ +#if defined(CONFIG_TI816X_DDR_PLL_400) /* 400 MHz */ +#define DDR_N 59 +#define DDR_P 0x1 +#define DDR_MDIV1 0x4 +#define DDR_INTFREQ2 0x8 +#define DDR_FRACFREQ2 0xD99999 +#define DDR_MDIV2 0x1E +#define DDR_INTFREQ3 0x8 +#define DDR_FRACFREQ3 0x0 +#define DDR_MDIV3 0x4 +#define DDR_INTFREQ4 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ4 0x0 +#define DDR_MDIV4 0x4 +#define DDR_INTFREQ5 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ5 0x0 +#define DDR_MDIV5 0x4 +#elif defined(CONFIG_TI816X_DDR_PLL_531) /* 531 MHz */ +#define DDR_N 59 +#define DDR_P 0x1 +#define DDR_MDIV1 0x3 +#define DDR_INTFREQ2 0x8 +#define DDR_FRACFREQ2 0xD99999 +#define DDR_MDIV2 0x1E +#define DDR_INTFREQ3 0x8 +#define DDR_FRACFREQ3 0x0 +#define DDR_MDIV3 0x4 +#define DDR_INTFREQ4 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ4 0x0 +#define DDR_MDIV4 0x4 +#define DDR_INTFREQ5 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ5 0x0 +#define DDR_MDIV5 0x4 +#elif defined(CONFIG_TI816X_DDR_PLL_675) /* 675 MHz */ +#define DDR_N 50 +#define DDR_P 0x1 +#define DDR_MDIV1 0x2 +#define DDR_INTFREQ2 0x9 +#define DDR_FRACFREQ2 0x0 +#define DDR_MDIV2 0x19 +#define DDR_INTFREQ3 0x13 +#define DDR_FRACFREQ3 0x800000 +#define DDR_MDIV3 0x2 +#define DDR_INTFREQ4 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ4 0x0 +#define DDR_MDIV4 0x4 +#define DDR_INTFREQ5 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ5 0x0 +#define DDR_MDIV5 0x4 +#elif defined(CONFIG_TI816X_DDR_PLL_796) /* 796 MHz */ +#define DDR_N 59 +#define DDR_P 0x1 +#define DDR_MDIV1 0x2 +#define DDR_INTFREQ2 0x8 +#define DDR_FRACFREQ2 0xD99999 +#define DDR_MDIV2 0x1E +#define DDR_INTFREQ3 0x8 +#define DDR_FRACFREQ3 0x0 +#define DDR_MDIV3 0x4 +#define DDR_INTFREQ4 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ4 0x0 +#define DDR_MDIV4 0x4 +#define DDR_INTFREQ5 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ5 0x0 +#define DDR_MDIV5 0x4 +#endif + +#define CONTROL_STATUS (CTRL_BASE + 0x40) +#define DDR_RCD (CTRL_BASE + 0x070C) +#define CM_TIMER1_CLKSEL (PRCM_BASE + 0x390) +#define DMM_PAT_BASE_ADDR (DMM_BASE + 0x420) +#define CM_ALWON_CUST_EFUSE_CLKCTRL (PRCM_BASE + 0x1628) + +#define INTCPS_SYSCONFIG 0x48200010 +#define CM_SYSCLK10_CLKSEL 0x48180324 + +struct cm_pll { + unsigned int mainpll_ctrl; /* offset 0x400 */ + unsigned int mainpll_pwd; + unsigned int mainpll_freq1; + unsigned int mainpll_div1; + unsigned int mainpll_freq2; + unsigned int mainpll_div2; + unsigned int mainpll_freq3; + unsigned int mainpll_div3; + unsigned int mainpll_freq4; + unsigned int mainpll_div4; + unsigned int mainpll_freq5; + unsigned int mainpll_div5; + unsigned int resv0[1]; + unsigned int mainpll_div6; + unsigned int resv1[1]; + unsigned int mainpll_div7; + unsigned int ddrpll_ctrl; /* offset 0x440 */ + unsigned int ddrpll_pwd; + unsigned int resv2[1]; + unsigned int ddrpll_div1; + unsigned int ddrpll_freq2; + unsigned int ddrpll_div2; + unsigned int ddrpll_freq3; + unsigned int ddrpll_div3; + unsigned int ddrpll_freq4; + unsigned int ddrpll_div4; + unsigned int ddrpll_freq5; + unsigned int ddrpll_div5; + unsigned int videopll_ctrl; /* offset 0x470 */ + unsigned int videopll_pwd; + unsigned int videopll_freq1; + unsigned int videopll_div1; + unsigned int videopll_freq2; + unsigned int videopll_div2; + unsigned int videopll_freq3; + unsigned int videopll_div3; + unsigned int resv3[4]; + unsigned int audiopll_ctrl; /* offset 0x4A0 */ + unsigned int audiopll_pwd; + unsigned int resv4[2]; + unsigned int audiopll_freq2; + unsigned int audiopll_div2; + unsigned int audiopll_freq3; + unsigned int audiopll_div3; + unsigned int audiopll_freq4; + unsigned int audiopll_div4; + unsigned int audiopll_freq5; + unsigned int audiopll_div5; +}; + +const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE; +const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE; +const struct cm_pll *cmpll = (struct cm_pll *)CM_PLL_BASE; +const struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; + +void enable_dmm_clocks(void) +{ + writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl); + writel(PRCM_MOD_EN, &cmdef->emif0clkctrl); + writel(PRCM_MOD_EN, &cmdef->emif1clkctrl); + + /* Wait for clocks to be active */ + while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300) + ; + /* Wait for emif0 to be fully functional, including OCP */ + while (((readl(&cmdef->emif0clkctrl) >> 17) & 0x3) != 0) + ; + /* Wait for emif1 to be fully functional, including OCP */ + while (((readl(&cmdef->emif1clkctrl) >> 17) & 0x3) != 0) + ; + + writel(PRCM_MOD_EN, &cmdef->dmmclkctrl); + /* Wait for dmm to be fully functional, including OCP */ + while (((readl(&cmdef->dmmclkctrl) >> 17) & 0x3) != 0) + ; + + /* Enable Tiled Access */ + writel(0x80000000, DMM_PAT_BASE_ADDR); +} + +/* assume delay is aprox at least 1us */ +static void ddr_delay(int d) +{ + int i; + + /* + * read a control register. + * this is a bit more delay and cannot be optimized by the compiler + * assuming one read takes 200 cycles and A8 is runing 1 GHz + * somewhat conservative setting + */ + for (i = 0; i < 50*d; i++) + readl(CONTROL_STATUS); +} + +static void main_pll_init_ti816x(void) +{ + u32 main_pll_ctrl = 0; + + /* Put the PLL in bypass mode by setting BIT2 in its ctrl reg */ + main_pll_ctrl = readl(&cmpll->mainpll_ctrl); + main_pll_ctrl &= 0xFFFFFFFB; + main_pll_ctrl |= BIT(2); + writel(main_pll_ctrl, &cmpll->mainpll_ctrl); + + /* Enable PLL by setting BIT3 in its ctrl reg */ + main_pll_ctrl = readl(&cmpll->mainpll_ctrl); + main_pll_ctrl &= 0xFFFFFFF7; + main_pll_ctrl |= BIT(3); + writel(main_pll_ctrl, &cmpll->mainpll_ctrl); + + /* Write the values of N,P in the CTRL reg */ + main_pll_ctrl = readl(&cmpll->mainpll_ctrl); + main_pll_ctrl &= 0xFF; + main_pll_ctrl |= (MAIN_N<<16 | MAIN_P<<8); + writel(main_pll_ctrl, &cmpll->mainpll_ctrl); + + /* Power up clock1-7 */ + writel(0x0, &cmpll->mainpll_pwd); + + /* Program the freq and divider values for clock1-7 */ + writel((1<<31 | 1<<28 | (MAIN_INTFREQ1<<24) | MAIN_FRACFREQ1), + &cmpll->mainpll_freq1); + writel(((1<<8) | MAIN_MDIV1), &cmpll->mainpll_div1); + + writel((1<<31 | 1<<28 | (MAIN_INTFREQ2<<24) | MAIN_FRACFREQ2), + &cmpll->mainpll_freq2); + writel(((1<<8) | MAIN_MDIV2), &cmpll->mainpll_div2); + + writel((1<<31 | 1<<28 | (MAIN_INTFREQ3<<24) | MAIN_FRACFREQ3), + &cmpll->mainpll_freq3); + writel(((1<<8) | MAIN_MDIV3), &cmpll->mainpll_div3); + + writel((1<<31 | 1<<28 | (MAIN_INTFREQ4<<24) | MAIN_FRACFREQ4), + &cmpll->mainpll_freq4); + writel(((1<<8) | MAIN_MDIV4), &cmpll->mainpll_div4); + + writel((1<<31 | 1<<28 | (MAIN_INTFREQ5<<24) | MAIN_FRACFREQ5), + &cmpll->mainpll_freq5); + writel(((1<<8) | MAIN_MDIV5), &cmpll->mainpll_div5); + + writel((1<<8 | MAIN_MDIV6), &cmpll->mainpll_div6); + + writel((1<<8 | MAIN_MDIV7), &cmpll->mainpll_div7); + + /* Wait for PLL to lock */ + while ((readl(&cmpll->mainpll_ctrl) & BIT(7)) != BIT(7)) + ; + + /* Put the PLL in normal mode, disable bypass */ + main_pll_ctrl = readl(&cmpll->mainpll_ctrl); + main_pll_ctrl &= 0xFFFFFFFB; + writel(main_pll_ctrl, &cmpll->mainpll_ctrl); +} + +static void ddr_pll_bypass_ti816x(void) +{ + u32 ddr_pll_ctrl = 0; + + /* Put the PLL in bypass mode by setting BIT2 in its ctrl reg */ + ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl); + ddr_pll_ctrl &= 0xFFFFFFFB; + ddr_pll_ctrl |= BIT(2); + writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl); +} + +static void ddr_pll_init_ti816x(void) +{ + u32 ddr_pll_ctrl = 0; + /* Enable PLL by setting BIT3 in its ctrl reg */ + ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl); + ddr_pll_ctrl &= 0xFFFFFFF7; + ddr_pll_ctrl |= BIT(3); + writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl); + + /* Write the values of N,P in the CTRL reg */ + ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl); + ddr_pll_ctrl &= 0xFF; + ddr_pll_ctrl |= (DDR_N<<16 | DDR_P<<8); + writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl); + + ddr_delay(10); + + /* Power up clock1-5 */ + writel(0x0, &cmpll->ddrpll_pwd); + + /* Program the freq and divider values for clock1-3 */ + writel(((0<<8) | DDR_MDIV1), &cmpll->ddrpll_div1); + ddr_delay(1); + writel(((1<<8) | DDR_MDIV1), &cmpll->ddrpll_div1); + writel((1<<31 | 1<<28 | (DDR_INTFREQ2<<24) | DDR_FRACFREQ2), + &cmpll->ddrpll_freq2); + writel(((1<<8) | DDR_MDIV2), &cmpll->ddrpll_div2); + writel(((0<<8) | DDR_MDIV3), &cmpll->ddrpll_div3); + ddr_delay(1); + writel(((1<<8) | DDR_MDIV3), &cmpll->ddrpll_div3); + ddr_delay(1); + writel((0<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3), + &cmpll->ddrpll_freq3); + ddr_delay(1); + writel((1<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3), + &cmpll->ddrpll_freq3); + + ddr_delay(5); + + /* Wait for PLL to lock */ + while ((readl(&cmpll->ddrpll_ctrl) & BIT(7)) != BIT(7)) + ; + + /* Power up RCD */ + writel(BIT(0), DDR_RCD); +} + +static void peripheral_enable(void) +{ + /* Wake-up the l3_slow clock */ + writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl); + + /* + * Note on Timers: + * There are 8 timers(0-7) out of which timer 0 is a secure timer. + * Timer 0 mux should not be changed + * + * To access the timer registers we need the to be + * enabled which is what we do in the first step + */ + + /* Enable timer1 */ + writel(PRCM_MOD_EN, &cmalwon->timer1clkctrl); + /* Select timer1 clock to be CLKIN (27MHz) */ + writel(BIT(1), CM_TIMER1_CLKSEL); + + /* Wait for timer1 to be ON-ACTIVE */ + while (((readl(&cmalwon->l3slowclkstctrl) + & (0x80000<<1))>>20) != 1) + ; + /* Wait for timer1 to be enabled */ + while (((readl(&cmalwon->timer1clkctrl) & 0x30000)>>16) != 0) + ; + /* Active posted mode */ + writel(PRCM_MOD_EN, (DM_TIMER1_BASE + 0x54)); + while (readl(DM_TIMER1_BASE + 0x10) & BIT(0)) + ; + /* Start timer1 */ + writel(BIT(0), (DM_TIMER1_BASE + 0x38)); + + /* eFuse */ + writel(PRCM_MOD_EN, CM_ALWON_CUST_EFUSE_CLKCTRL); + while (readl(CM_ALWON_CUST_EFUSE_CLKCTRL) != PRCM_MOD_EN) + ; + + /* Enable gpio0 */ + writel(PRCM_MOD_EN, &cmalwon->gpio0clkctrl); + while (readl(&cmalwon->gpio0clkctrl) != PRCM_MOD_EN) + ; + writel((BIT(8)), &cmalwon->gpio0clkctrl); + + /* Enable spi */ + writel(PRCM_MOD_EN, &cmalwon->spiclkctrl); + while (readl(&cmalwon->spiclkctrl) != PRCM_MOD_EN) + ; + + /* Enable i2c0 */ + writel(PRCM_MOD_EN, &cmalwon->i2c0clkctrl); + while (readl(&cmalwon->i2c0clkctrl) != PRCM_MOD_EN) + ; + + /* Enable ethernet0 */ + writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl); + writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl); + writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl); + + /* Enable hsmmc */ + writel(PRCM_MOD_EN, &cmalwon->sdioclkctrl); + while (readl(&cmalwon->sdioclkctrl) != PRCM_MOD_EN) + ; +} + +void setup_clocks_for_console(void) +{ + /* Fix ROM code bug - from TI-PSP-04.00.02.14 */ + writel(0x0, CM_SYSCLK10_CLKSEL); + + ddr_pll_bypass_ti816x(); + + /* Enable uart0-2 */ + writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl); + while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN) + ; + writel(PRCM_MOD_EN, &cmalwon->uart1clkctrl); + while (readl(&cmalwon->uart1clkctrl) != PRCM_MOD_EN) + ; + writel(PRCM_MOD_EN, &cmalwon->uart2clkctrl); + while (readl(&cmalwon->uart2clkctrl) != PRCM_MOD_EN) + ; + while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100) + ; +} + +void prcm_init(void) +{ + /* Enable the control */ + writel(PRCM_MOD_EN, &cmalwon->controlclkctrl); + + main_pll_init_ti816x(); + ddr_pll_init_ti816x(); + + /* + * With clk freqs setup to desired values, + * enable the required peripherals + */ + peripheral_enable(); +} diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c index 21cefd4..59ad25c 100644 --- a/arch/arm/cpu/armv7/am33xx/emif4.c +++ b/arch/arm/cpu/armv7/am33xx/emif4.c @@ -40,9 +40,11 @@ void dram_init_banksize(void) static struct dmm_lisa_map_regs *hw_lisa_map_regs = (struct dmm_lisa_map_regs *)DMM_BASE; #endif +#ifndef CONFIG_TI816X static struct vtp_reg *vtpreg[2] = { (struct vtp_reg *)VTP0_CTRL_ADDR, (struct vtp_reg *)VTP1_CTRL_ADDR}; +#endif #ifdef CONFIG_AM33XX static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR; #endif @@ -64,6 +66,7 @@ void config_dmm(const struct dmm_lisa_map_regs *regs) } #endif +#ifndef CONFIG_TI816X static void config_vtp(int nr) { writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_ENABLE, @@ -78,6 +81,7 @@ static void config_vtp(int nr) VTP_CTRL_READY) ; } +#endif void __weak ddr_pll_config(unsigned int ddrpll_m) { @@ -88,7 +92,9 @@ void config_ddr(unsigned int pll, unsigned int ioctrl, const struct emif_regs *regs, int nr) { ddr_pll_config(pll); +#ifndef CONFIG_TI816X config_vtp(nr); +#endif config_cmd_ctrl(ctrl, nr); config_ddr_data(data, nr); |