summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu')
-rw-r--r--arch/arm/cpu/armv7/sunxi/Makefile4
-rw-r--r--arch/arm/cpu/armv7/sunxi/board.c38
-rw-r--r--arch/arm/cpu/armv7/sunxi/clock_sun4i.c11
-rw-r--r--arch/arm/cpu/armv7/sunxi/clock_sun6i.c76
-rw-r--r--arch/arm/cpu/armv7/sunxi/cpu_info.c4
-rw-r--r--arch/arm/cpu/armv7/sunxi/dram.c36
-rw-r--r--arch/arm/cpu/armv7/sunxi/prcm.c35
7 files changed, 181 insertions, 23 deletions
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
index e9721b2..24f1dae 100644
--- a/arch/arm/cpu/armv7/sunxi/Makefile
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -11,9 +11,13 @@ obj-y += timer.o
obj-y += board.o
obj-y += clock.o
obj-y += pinmux.o
+obj-$(CONFIG_SUN6I) += prcm.o
+obj-$(CONFIG_SUN8I) += prcm.o
obj-$(CONFIG_SUN4I) += clock_sun4i.o
obj-$(CONFIG_SUN5I) += clock_sun4i.o
+obj-$(CONFIG_SUN6I) += clock_sun6i.o
obj-$(CONFIG_SUN7I) += clock_sun4i.o
+obj-$(CONFIG_SUN8I) += clock_sun6i.o
ifndef CONFIG_SPL_BUILD
obj-y += cpu_info.o
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index f2cedbb..06eb676 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -50,18 +50,35 @@ u32 spl_boot_mode(void)
int gpio_init(void)
{
-#if CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I))
+#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
+#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)
+ /* disable GPB22,23 as uart0 tx,rx to avoid conflict */
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT);
+ sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT);
+#endif
+ sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF2_UART0_TX);
+ sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF4_UART0_RX);
+ sunxi_gpio_set_pull(SUNXI_GPF(4), 1);
+#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I))
sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX);
sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX);
- sunxi_gpio_set_pull(SUNXI_GPB(23), 1);
+ sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN5I)
sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB19_UART0_TX);
sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB20_UART0_RX);
- sunxi_gpio_set_pull(SUNXI_GPB(20), 1);
+ sunxi_gpio_set_pull(SUNXI_GPB(20), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN6I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH20_UART0_TX);
+ sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH21_UART0_RX);
+ sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP);
#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_SUN5I)
sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART1_TX);
sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART1_RX);
- sunxi_gpio_set_pull(SUNXI_GPG(4), 1);
+ sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_SUN8I)
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL2_R_UART_TX);
+ sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL3_R_UART_RX);
+ sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP);
#else
#error Unsupported console port number. Please fix pin mux settings in board.c
#endif
@@ -71,6 +88,7 @@ int gpio_init(void)
void reset_cpu(ulong addr)
{
+#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
static const struct sunxi_wdog *wdog =
&((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
@@ -82,12 +100,22 @@ void reset_cpu(ulong addr)
/* sun5i sometimes gets stuck without this */
writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
}
+#else /* CONFIG_SUN6I || CONFIG_SUN8I || .. */
+ static const struct sunxi_wdog *wdog =
+ ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
+
+ /* Set the watchdog for its shortest interval (.5s) and wait */
+ writel(WDT_CFG_RESET, &wdog->cfg);
+ writel(WDT_MODE_EN, &wdog->mode);
+ writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
+#endif
}
/* do some early init */
void s_init(void)
{
-#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I)
+#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || \
+ defined CONFIG_SUN6I || defined CONFIG_SUN8I)
/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
asm volatile(
"mrc p15, 0, r0, c1, c0, 1\n"
diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c
index ecbdb01..4a0d64f 100644
--- a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c
@@ -180,6 +180,17 @@ void clock_set_pll1(unsigned int hz)
}
#endif
+unsigned int clock_get_pll5p(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ uint32_t rval = readl(&ccm->pll5_cfg);
+ int n = ((rval & CCM_PLL5_CTRL_N_MASK) >> CCM_PLL5_CTRL_N_SHIFT);
+ int k = ((rval & CCM_PLL5_CTRL_K_MASK) >> CCM_PLL5_CTRL_K_SHIFT) + 1;
+ int p = ((rval & CCM_PLL5_CTRL_P_MASK) >> CCM_PLL5_CTRL_P_SHIFT);
+ return (24000000 * n * k) >> p;
+}
+
unsigned int clock_get_pll6(void)
{
struct sunxi_ccm_reg *const ccm =
diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
new file mode 100644
index 0000000..1eae976
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c
@@ -0,0 +1,76 @@
+/*
+ * sun6i specific clock code
+ *
+ * (C) Copyright 2007-2012
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/sys_proto.h>
+
+void clock_init_uart(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+#if CONFIG_CONS_INDEX < 5
+ /* uart clock source is apb2 */
+ writel(APB2_CLK_SRC_OSC24M|
+ APB2_CLK_RATE_N_1|
+ APB2_CLK_RATE_M(1),
+ &ccm->apb2_div);
+
+ /* open the clock for uart */
+ setbits_le32(&ccm->apb2_gate,
+ CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT +
+ CONFIG_CONS_INDEX - 1));
+
+ /* deassert uart reset */
+ setbits_le32(&ccm->apb2_reset_cfg,
+ 1 << (APB2_RESET_UART_SHIFT +
+ CONFIG_CONS_INDEX - 1));
+#else
+ /* enable R_PIO and R_UART clocks, and de-assert resets */
+ prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART);
+#endif
+
+ /* Dup with clock_init_safe(), drop once sun6i SPL support lands */
+ writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
+}
+
+int clock_twi_onoff(int port, int state)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ if (port > 3)
+ return -1;
+
+ /* set the apb clock gate for twi */
+ if (state)
+ setbits_le32(&ccm->apb2_gate,
+ CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
+ else
+ clrbits_le32(&ccm->apb2_gate,
+ CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port));
+
+ return 0;
+}
+
+unsigned int clock_get_pll6(void)
+{
+ struct sunxi_ccm_reg *const ccm =
+ (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+ uint32_t rval = readl(&ccm->pll6_cfg);
+ int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1;
+ int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1;
+ return 24000000 * n * k / 2;
+}
diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c
index 5cf35ac..4f2a09c 100644
--- a/arch/arm/cpu/armv7/sunxi/cpu_info.c
+++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c
@@ -23,8 +23,12 @@ int print_cpuinfo(void)
case 7: puts("CPU: Allwinner A10s (SUN5I)\n"); break;
default: puts("CPU: Allwinner A1X (SUN5I)\n");
}
+#elif defined CONFIG_SUN6I
+ puts("CPU: Allwinner A31 (SUN6I)\n");
#elif defined CONFIG_SUN7I
puts("CPU: Allwinner A20 (SUN7I)\n");
+#elif defined CONFIG_SUN8I
+ puts("CPU: Allwinner A23 (SUN8I)\n");
#else
#warning Please update cpu_info.c with correct CPU information
puts("CPU: SUNXI Family\n");
diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c
index 584f742..3cf3cbf 100644
--- a/arch/arm/cpu/armv7/sunxi/dram.c
+++ b/arch/arm/cpu/armv7/sunxi/dram.c
@@ -252,15 +252,9 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk)
{
u32 reg_val;
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- /* PLL5P and PLL6 are the potential clock sources for MBUS */
- u32 pll6x_div, pll5p_div;
- u32 pll6x_clk = clock_get_pll6() / 1000000;
- u32 pll5p_clk = clk / 24 * 48;
+ u32 pll5p_clk, pll6x_clk;
+ u32 pll5p_div, pll6x_div;
u32 pll5p_rate, pll6x_rate;
-#ifdef CONFIG_SUN7I
- pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */
-#endif
/* setup DRAM PLL */
reg_val = readl(&ccm->pll5_cfg);
@@ -268,33 +262,32 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk)
reg_val &= ~CCM_PLL5_CTRL_K_MASK; /* set K to 0 (x1) */
reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */
reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */
+#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT
+ /* Old kernels are hardcoded to P=1 (divide by 2) */
+ reg_val |= CCM_PLL5_CTRL_P(1);
+#endif
if (clk >= 540 && clk < 552) {
- /* dram = 540MHz, pll5p = 1080MHz */
- pll5p_clk = 1080;
+ /* dram = 540MHz */
reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15));
} else if (clk >= 512 && clk < 528) {
- /* dram = 512MHz, pll5p = 1536MHz */
- pll5p_clk = 1536;
+ /* dram = 512MHz */
reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4));
reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16));
} else if (clk >= 496 && clk < 504) {
- /* dram = 496MHz, pll5p = 1488MHz */
- pll5p_clk = 1488;
+ /* dram = 496MHz */
reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3));
reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2));
reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31));
} else if (clk >= 468 && clk < 480) {
- /* dram = 468MHz, pll5p = 936MHz */
- pll5p_clk = 936;
+ /* dram = 468MHz */
reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13));
} else if (clk >= 396 && clk < 408) {
- /* dram = 396MHz, pll5p = 792MHz */
- pll5p_clk = 792;
+ /* dram = 396MHz */
reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2));
reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3));
reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11));
@@ -322,6 +315,13 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk)
/* setup MBUS clock */
if (!mbus_clk)
mbus_clk = 300;
+
+ /* PLL5P and PLL6 are the potential clock sources for MBUS */
+ pll6x_clk = clock_get_pll6() / 1000000;
+#ifdef CONFIG_SUN7I
+ pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */
+#endif
+ pll5p_clk = clock_get_pll5p() / 1000000;
pll6x_div = DIV_ROUND_UP(pll6x_clk, mbus_clk);
pll5p_div = DIV_ROUND_UP(pll5p_clk, mbus_clk);
pll6x_rate = pll6x_clk / pll6x_div;
diff --git a/arch/arm/cpu/armv7/sunxi/prcm.c b/arch/arm/cpu/armv7/sunxi/prcm.c
new file mode 100644
index 0000000..19b4938
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/prcm.c
@@ -0,0 +1,35 @@
+/*
+ * Sunxi A31 Power Management Unit
+ *
+ * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * http://linux-sunxi.org
+ *
+ * Based on sun6i sources and earlier U-Boot Allwinner A10 SPL work
+ *
+ * (C) Copyright 2006-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing@allwinnertech.com>
+ * Tom Cubie <tangliang@allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/sys_proto.h>
+
+/* APB0 clock gate and reset bit offsets are the same. */
+void prcm_apb0_enable(u32 flags)
+{
+ struct sunxi_prcm_reg *prcm =
+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+
+ /* open the clock for module */
+ setbits_le32(&prcm->apb0_gate, flags);
+
+ /* deassert reset for module */
+ setbits_le32(&prcm->apb0_reset, flags);
+}
generated by cgit v1.1 at 2024-12-29 06:31:21 +0000