diff options
Diffstat (limited to 'arch/arm/cpu/armv8/fsl-lsch3/README')
-rw-r--r-- | arch/arm/cpu/armv8/fsl-lsch3/README | 38 |
1 files changed, 38 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/README b/arch/arm/cpu/armv8/fsl-lsch3/README index 4f36e2a..15a1549 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/README +++ b/arch/arm/cpu/armv8/fsl-lsch3/README @@ -95,3 +95,41 @@ mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined mcmemsize: MC DRAM block size. If this variable is not defined, the value CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed. + +Booting from NAND +------------------- +Booting from NAND requires two images, RCW and u-boot-with-spl.bin. +The difference between NAND boot RCW image and NOR boot image is the PBI +command sequence. Below is one example for PBI commands for QDS which uses +NAND device with 2KB/page, block size 128KB. + +1) CCSR 4-byte write to 0x00e00404, data=0x00000000 +2) CCSR 4-byte write to 0x00e00400, data=0x1800a000 +The above two commands set bootloc register to 0x00000000_1800a000 where +the u-boot code will be running in OCRAM. + +3) Block Copy: SRC=0x0107, SRC_ADDR=0x00020000, DEST_ADDR=0x1800a000, +BLOCK_SIZE=0x00014000 +This command copies u-boot image from NAND device into OCRAM. The values need +to adjust accordingly. + +SRC should match the cfg_rcw_src, the reset config pins. It depends + on the NAND device. See reference manual for cfg_rcw_src. +SRC_ADDR is the offset of u-boot-with-spl.bin image in NAND device. In + the example above, 128KB. For easy maintenance, we put it at + the beginning of next block from RCW. +DEST_ADDR is fixed at 0x1800a000, matching bootloc set above. +BLOCK_SIZE is the size to be copied by PBI. + +RCW image should be written to the beginning of NAND device. Example of using +u-boot command + +nand write <rcw image in memory> 0 <size of rcw image> + +To form the NAND image, build u-boot with NAND config, for example, +ls2085aqds_nand_defconfig. The image needed is u-boot-with-spl.bin. +The u-boot image should be written to match SRC_ADDR, in above example 0x20000. + +nand write <u-boot image in memory> 200000 <size of u-boot image> + +With these two images in NAND device, the board can boot from NAND. |