summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv7
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu/armv7')
-rw-r--r--arch/arm/cpu/armv7/am33xx/board.c61
-rw-r--r--arch/arm/cpu/armv7/mx6/soc.c1
-rw-r--r--arch/arm/cpu/armv7/omap3/board.c29
-rw-r--r--arch/arm/cpu/armv7/omap3/emif4.c2
-rw-r--r--arch/arm/cpu/armv7/omap3/sys_info.c4
-rw-r--r--arch/arm/cpu/armv7/tegra20/display.c3
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile1
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c15
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile1
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c15
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile1
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c15
12 files changed, 143 insertions, 5 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 828d10b..29b1d73 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -9,7 +9,9 @@
*/
#include <common.h>
+#include <dm.h>
#include <errno.h>
+#include <ns16550.h>
#include <spl.h>
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
@@ -36,6 +38,63 @@
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_DM_GPIO
+static const struct omap_gpio_platdata am33xx_gpio[] = {
+ { 0, AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
+ { 1, AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
+ { 2, AM33XX_GPIO2_BASE, METHOD_GPIO_24XX },
+ { 3, AM33XX_GPIO3_BASE, METHOD_GPIO_24XX },
+#ifdef CONFIG_AM43XX
+ { 4, AM33XX_GPIO4_BASE, METHOD_GPIO_24XX },
+ { 5, AM33XX_GPIO5_BASE, METHOD_GPIO_24XX },
+#endif
+};
+
+U_BOOT_DEVICES(am33xx_gpios) = {
+ { "gpio_omap", &am33xx_gpio[0] },
+ { "gpio_omap", &am33xx_gpio[1] },
+ { "gpio_omap", &am33xx_gpio[2] },
+ { "gpio_omap", &am33xx_gpio[3] },
+#ifdef CONFIG_AM43XX
+ { "gpio_omap", &am33xx_gpio[4] },
+ { "gpio_omap", &am33xx_gpio[5] },
+#endif
+};
+
+# ifndef CONFIG_OF_CONTROL
+/*
+ * TODO(sjg@chromium.org): When we can move SPL serial to DM, we can remove
+ * the CONFIGs. At the same time, we should move this to the board files.
+ */
+static const struct ns16550_platdata am33xx_serial[] = {
+ { CONFIG_SYS_NS16550_COM1, 2, CONFIG_SYS_NS16550_CLK },
+# ifdef CONFIG_SYS_NS16550_COM2
+ { CONFIG_SYS_NS16550_COM2, 2, CONFIG_SYS_NS16550_CLK },
+# ifdef CONFIG_SYS_NS16550_COM3
+ { CONFIG_SYS_NS16550_COM3, 2, CONFIG_SYS_NS16550_CLK },
+ { CONFIG_SYS_NS16550_COM4, 2, CONFIG_SYS_NS16550_CLK },
+ { CONFIG_SYS_NS16550_COM5, 2, CONFIG_SYS_NS16550_CLK },
+ { CONFIG_SYS_NS16550_COM6, 2, CONFIG_SYS_NS16550_CLK },
+# endif
+# endif
+};
+
+U_BOOT_DEVICES(am33xx_uarts) = {
+ { "serial_omap", &am33xx_serial[0] },
+# ifdef CONFIG_SYS_NS16550_COM2
+ { "serial_omap", &am33xx_serial[1] },
+# ifdef CONFIG_SYS_NS16550_COM3
+ { "serial_omap", &am33xx_serial[2] },
+ { "serial_omap", &am33xx_serial[3] },
+ { "serial_omap", &am33xx_serial[4] },
+ { "serial_omap", &am33xx_serial[5] },
+# endif
+# endif
+};
+# endif
+
+#else
+
static const struct gpio_bank gpio_bank_am33xx[] = {
{ (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
{ (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
@@ -49,6 +108,8 @@ static const struct gpio_bank gpio_bank_am33xx[] = {
const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
+#endif
+
#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
int cpu_mmc_init(bd_t *bis)
{
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 6352422..a202b03 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -9,6 +9,7 @@
#include <common.h>
#include <asm/armv7.h>
+#include <asm/bootm.h>
#include <asm/pl310.h>
#include <asm/errno.h>
#include <asm/io.h>
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 667e77f..c942fe6 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -17,13 +17,15 @@
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <dm.h>
+#include <mmc.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mem.h>
#include <asm/cache.h>
#include <asm/armv7.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
#include <asm/omap_common.h>
#include <asm/arch/mmc_host_def.h>
#include <i2c.h>
@@ -38,6 +40,27 @@ static void omap3_setup_aux_cr(void);
static void omap3_invalidate_l2_cache_secure(void);
#endif
+#ifdef CONFIG_DM_GPIO
+static const struct omap_gpio_platdata omap34xx_gpio[] = {
+ { 0, OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX },
+ { 1, OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX },
+ { 2, OMAP34XX_GPIO3_BASE, METHOD_GPIO_24XX },
+ { 3, OMAP34XX_GPIO4_BASE, METHOD_GPIO_24XX },
+ { 4, OMAP34XX_GPIO5_BASE, METHOD_GPIO_24XX },
+ { 5, OMAP34XX_GPIO6_BASE, METHOD_GPIO_24XX },
+};
+
+U_BOOT_DEVICES(am33xx_gpios) = {
+ { "gpio_omap", &omap34xx_gpio[0] },
+ { "gpio_omap", &omap34xx_gpio[1] },
+ { "gpio_omap", &omap34xx_gpio[2] },
+ { "gpio_omap", &omap34xx_gpio[3] },
+ { "gpio_omap", &omap34xx_gpio[4] },
+ { "gpio_omap", &omap34xx_gpio[5] },
+};
+
+#else
+
static const struct gpio_bank gpio_bank_34xx[6] = {
{ (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX },
@@ -49,6 +72,8 @@ static const struct gpio_bank gpio_bank_34xx[6] = {
const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx;
+#endif
+
#ifdef CONFIG_SPL_BUILD
/*
* We use static variables because global data is not ready yet.
@@ -266,7 +291,7 @@ int __weak misc_init_r(void)
* Routine: wait_for_command_complete
* Description: Wait for posting to finish on watchdog
*****************************************************************************/
-void wait_for_command_complete(struct watchdog *wd_base)
+static void wait_for_command_complete(struct watchdog *wd_base)
{
int pending = 1;
do {
diff --git a/arch/arm/cpu/armv7/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c
index 6c7330a..a2aadc9 100644
--- a/arch/arm/cpu/armv7/omap3/emif4.c
+++ b/arch/arm/cpu/armv7/omap3/emif4.c
@@ -61,7 +61,7 @@ u32 get_sdr_cs_offset(u32 cs)
* - Init the emif4 module for DDR access
* - Early init routines, called from flash or SRAM.
*/
-void do_emif4_init(void)
+static void do_emif4_init(void)
{
unsigned int regval;
/* Set the DDR PHY parameters in PHY ctrl registers */
diff --git a/arch/arm/cpu/armv7/omap3/sys_info.c b/arch/arm/cpu/armv7/omap3/sys_info.c
index bef5f05..bbb65bb 100644
--- a/arch/arm/cpu/armv7/omap3/sys_info.c
+++ b/arch/arm/cpu/armv7/omap3/sys_info.c
@@ -16,6 +16,8 @@
#include <asm/io.h>
#include <asm/arch/mem.h> /* get mem tables */
#include <asm/arch/sys_proto.h>
+#include <asm/bootm.h>
+
#include <i2c.h>
#include <linux/compiler.h>
@@ -202,7 +204,7 @@ u32 __weak get_board_rev(void)
/********************************************************
* get_base(); get upper addr of current execution
*******************************************************/
-u32 get_base(void)
+static u32 get_base(void)
{
u32 val;
diff --git a/arch/arm/cpu/armv7/tegra20/display.c b/arch/arm/cpu/armv7/tegra20/display.c
index fd77f3f..d98cec9 100644
--- a/arch/arm/cpu/armv7/tegra20/display.c
+++ b/arch/arm/cpu/armv7/tegra20/display.c
@@ -194,7 +194,8 @@ static void rgb_enable(struct dc_com_reg *com)
writel(rgb_sel_tab[i], &com->pin_output_sel[i]);
}
-int setup_window(struct disp_ctl_win *win, struct fdt_disp_config *config)
+static int setup_window(struct disp_ctl_win *win,
+ struct fdt_disp_config *config)
{
win->x = 0;
win->y = 0;
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
index b385e19..781b511 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
+obj-y += platdevice.o
obj-y += boot-mode.o
obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \
sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c
new file mode 100644
index 0000000..0047223
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/platdevice.h>
+
+#define UART_MASTER_CLK 36864000
+
+SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK)
+SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
+SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
+SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
index 712afd1..e11f4f6 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
+obj-y += platdevice.o
obj-y += boot-mode.o
obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o sbc_init.o \
sg_init.o pll_init.o clkrst_init.o pinctrl.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c
new file mode 100644
index 0000000..6da921e
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/platdevice.h>
+
+#define UART_MASTER_CLK 73728000
+
+SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK)
+SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
+SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
+SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
index b385e19..781b511 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
+obj-y += platdevice.o
obj-y += boot-mode.o
obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \
sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c
new file mode 100644
index 0000000..59d054a
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/platdevice.h>
+
+#define UART_MASTER_CLK 80000000
+
+SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK)
+SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
+SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
+SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
generated by cgit v1.1 at 2024-12-26 18:09:27 +0000