diff options
Diffstat (limited to 'arch/arm/cpu/armv7')
-rw-r--r-- | arch/arm/cpu/armv7/mx6/clock.c | 42 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/mx6/ddr.c | 10 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/mx6/soc.c | 13 |
3 files changed, 29 insertions, 36 deletions
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index a850d1a..ff932aa 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -97,7 +97,7 @@ void enable_enet_clk(unsigned char enable) { u32 mask, *addr; - if (is_cpu_type(MXC_CPU_MX6UL)) { + if (is_mx6ul()) { mask = MXC_CCM_CCGR3_ENET_MASK; addr = &imx_ccm->CCGR3; } else { @@ -117,7 +117,7 @@ void enable_uart_clk(unsigned char enable) { u32 mask; - if (is_cpu_type(MXC_CPU_MX6UL)) + if (is_mx6ul()) mask = MXC_CCM_CCGR5_UART_MASK; else mask = MXC_CCM_CCGR5_UART_MASK | MXC_CCM_CCGR5_UART_SERIAL_MASK; @@ -168,7 +168,7 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num) reg &= ~mask; __raw_writel(reg, &imx_ccm->CCGR2); } else { - if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) { + if (is_mx6sx() || is_mx6ul()) { mask = MXC_CCM_CCGR6_I2C4_MASK; addr = &imx_ccm->CCGR6; } else { @@ -279,7 +279,7 @@ static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num) switch (pll) { case PLL_BUS: - if (!is_cpu_type(MXC_CPU_MX6UL)) { + if (!is_mx6ul()) { if (pfd_num == 3) { /* No PFD3 on PPL2 */ return 0; @@ -379,8 +379,8 @@ static u32 get_ipg_per_clk(void) u32 reg, perclk_podf; reg = __raw_readl(&imx_ccm->cscmr1); - if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) || - is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) { + if (is_mx6sl() || is_mx6sx() || + is_mx6dqp() || is_mx6ul()) { if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK) return MXC_HCLK; /* OSC 24Mhz */ } @@ -396,8 +396,7 @@ static u32 get_uart_clk(void) u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */ reg = __raw_readl(&imx_ccm->cscdr1); - if (is_cpu_type(MXC_CPU_MX6SL) || is_cpu_type(MXC_CPU_MX6SX) || - is_mx6dqp() || is_cpu_type(MXC_CPU_MX6UL)) { + if (is_mx6sl() || is_mx6sx() || is_mx6dqp() || is_mx6ul()) { if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL) freq = MXC_HCLK; } @@ -416,8 +415,7 @@ static u32 get_cspi_clk(void) cspi_podf = (reg & MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK) >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET; - if (is_mx6dqp() || is_cpu_type(MXC_CPU_MX6SL) || - is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) { + if (is_mx6dqp() || is_mx6sl() || is_mx6sx() || is_mx6ul()) { if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK) return MXC_HCLK / (cspi_podf + 1); } @@ -479,14 +477,13 @@ static u32 get_mmdc_ch0_clk(void) u32 freq, podf, per2_clk2_podf, pmu_misc2_audio_div; - if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) || - is_cpu_type(MXC_CPU_MX6SL)) { + if (is_mx6sx() || is_mx6ul() || is_mx6sl()) { podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) >> MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET; if (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK_SEL) { per2_clk2_podf = (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_MASK) >> MXC_CCM_CBCDR_PERIPH2_CLK2_PODF_OFFSET; - if (is_cpu_type(MXC_CPU_MX6SL)) { + if (is_mx6sl()) { if (cbcmr & MXC_CCM_CBCMR_PERIPH2_CLK2_SEL) freq = MXC_HCLK; else @@ -618,7 +615,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq) debug("mxs_set_lcdclk, freq = %dKHz\n", freq); - if ((!is_cpu_type(MXC_CPU_MX6SX)) && !is_cpu_type(MXC_CPU_MX6UL)) { + if (!is_mx6sx() && !is_mx6ul()) { debug("This chip not support lcd!\n"); return; } @@ -630,7 +627,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq) return; } - if (is_cpu_type(MXC_CPU_MX6SX)) { + if (is_mx6sx()) { reg = readl(&imx_ccm->cscdr2); /* Can't change clocks when clock not from pre-mux */ if ((reg & MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK) != 0) @@ -711,7 +708,7 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq) MXC_CCM_CBCMR_LCDIF1_PODF_MASK, ((postd - 1) << MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET)); - } else if (is_cpu_type(MXC_CPU_MX6SX)) { + } else if (is_mx6sx()) { /* Setting LCDIF2 for i.MX6SX */ if (enable_pll_video(pll_div, pll_num, pll_denom, post_div)) return; @@ -737,7 +734,7 @@ int enable_lcdif_clock(u32 base_addr) u32 reg = 0; u32 lcdif_clk_sel_mask, lcdif_ccgr3_mask; - if (is_cpu_type(MXC_CPU_MX6SX)) { + if (is_mx6sx()) { if ((base_addr != LCDIF1_BASE_ADDR) && (base_addr != LCDIF2_BASE_ADDR)) { puts("Wrong LCD interface!\n"); @@ -752,7 +749,7 @@ int enable_lcdif_clock(u32 base_addr) MXC_CCM_CCGR3_DISP_AXI_MASK) : (MXC_CCM_CCGR3_LCDIF1_PIX_MASK | MXC_CCM_CCGR3_DISP_AXI_MASK); - } else if (is_cpu_type(MXC_CPU_MX6UL)) { + } else if (is_mx6ul()) { if (base_addr != LCDIF1_BASE_ADDR) { puts("Wrong LCD interface!\n"); return -EINVAL; @@ -850,8 +847,7 @@ int enable_fec_anatop_clock(int fec_id, enum enet_freq freq) reg |= BF_ANADIG_PLL_ENET_DIV_SELECT(freq); } else if (fec_id == 1) { /* Only i.MX6SX/UL support ENET2 */ - if (!(is_cpu_type(MXC_CPU_MX6SX) || - is_cpu_type(MXC_CPU_MX6UL))) + if (!(is_mx6sx() || is_mx6ul())) return -EINVAL; reg &= ~BM_ANADIG_PLL_ENET2_DIV_SELECT; reg |= BF_ANADIG_PLL_ENET2_DIV_SELECT(freq); @@ -1044,7 +1040,7 @@ int enable_pcie_clock(void) #define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF 0xa #define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF 0xb - if (is_cpu_type(MXC_CPU_MX6SX)) + if (is_mx6sx()) lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF; else lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF; @@ -1228,7 +1224,7 @@ static void disable_ldb_di_clock_sources(void) /* Make sure PFDs are disabled at boot. */ reg = readl(&mxc_ccm->analog_pfd_528); /* Cannot disable pll2_pfd2_396M, as it is the MMDC clock in iMX6DL */ - if (is_cpu_type(MXC_CPU_MX6DL) || is_cpu_type(MXC_CPU_MX6SOLO)) + if (is_mx6sdl()) reg |= 0x80008080; else reg |= 0x80808080; @@ -1251,7 +1247,7 @@ static void enable_ldb_di_clock_sources(void) int reg; reg = readl(&mxc_ccm->analog_pfd_528); - if (is_cpu_type(MXC_CPU_MX6DL) || is_cpu_type(MXC_CPU_MX6SOLO)) + if (is_mx6sdl()) reg &= ~(0x80008080); else reg &= ~(0x80808080); diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c index 1e7ae28..3cc8666 100644 --- a/arch/arm/cpu/armv7/mx6/ddr.c +++ b/arch/arm/cpu/armv7/mx6/ddr.c @@ -888,8 +888,7 @@ void mx6sdl_dram_iocfg(unsigned width, #define MR(val, ba, cmd, cs1) \ ((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba) #define MMDC1(entry, value) do { \ - if (!is_cpu_type(MXC_CPU_MX6SX) && !is_cpu_type(MXC_CPU_MX6UL) && \ - !is_cpu_type(MXC_CPU_MX6SL)) \ + if (!is_mx6sx() && !is_mx6ul() && !is_mx6sl()) \ mmdc1->entry = value; \ } while (0) @@ -1197,12 +1196,11 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo, u16 mem_speed = ddr3_cfg->mem_speed; mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR; - if (!is_cpu_type(MXC_CPU_MX6SX) && !is_cpu_type(MXC_CPU_MX6UL) && - !is_cpu_type(MXC_CPU_MX6SL)) + if (!is_mx6sx() && !is_mx6ul() && !is_mx6sl()) mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR; /* Limit mem_speed for MX6D/MX6Q */ - if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) { + if (is_mx6dq()) { if (mem_speed > 1066) mem_speed = 1066; /* 1066 MT/s */ @@ -1221,7 +1219,7 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo, * Data rate of 1066 MT/s requires 533 MHz DDR3 clock, but MX6D/Q supports * up to 528 MHz, so reduce the clock to fit chip specs */ - if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) { + if (is_mx6dq()) { if (clock > 528) clock = 528; /* 528 MHz */ } diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index aaa1adb..407f316 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -126,7 +126,7 @@ u32 get_cpu_speed_grade_hz(void) val >>= OCOTP_CFG3_SPEED_SHIFT; val &= 0x3; - if (is_cpu_type(MXC_CPU_MX6UL)) { + if (is_mx6ul()) { if (val == OCOTP_CFG3_SPEED_528MHZ) return 528000000; else if (val == OCOTP_CFG3_SPEED_696MHZ) @@ -138,14 +138,14 @@ u32 get_cpu_speed_grade_hz(void) switch (val) { /* Valid for IMX6DQ */ case OCOTP_CFG3_SPEED_1P2GHZ: - if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) + if (is_mx6dq()) return 1200000000; /* Valid for IMX6SX/IMX6SDL/IMX6DQ */ case OCOTP_CFG3_SPEED_1GHZ: return 996000000; /* Valid for IMX6DQ */ case OCOTP_CFG3_SPEED_850MHZ: - if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) + if (is_mx6dq()) return 852000000; /* Valid for IMX6SX/IMX6SDL/IMX6DQ */ case OCOTP_CFG3_SPEED_800MHZ: @@ -293,7 +293,7 @@ static void clear_mmdc_ch_mask(void) reg = readl(&mxc_ccm->ccdr); /* Clear MMDC channel mask */ - if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) || is_cpu_type(MXC_CPU_MX6SL)) + if (is_mx6sx() || is_mx6ul() || is_mx6sl()) reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK); else reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK); @@ -459,8 +459,7 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) struct fuse_bank4_regs *fuse = (struct fuse_bank4_regs *)bank->fuse_regs; - if ((is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) && - dev_id == 1) { + if ((is_mx6sx() || is_mx6ul()) && dev_id == 1) { u32 value = readl(&fuse->mac_addr2); mac[0] = value >> 24 ; mac[1] = value >> 16 ; @@ -524,7 +523,7 @@ void s_init(void) u32 mask528; u32 reg, periph1, periph2; - if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) + if (is_mx6sx() || is_mx6ul()) return; /* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs |