diff options
Diffstat (limited to 'arch/arm/cpu/armv7')
-rw-r--r-- | arch/arm/cpu/armv7/am33xx/board.c | 85 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/am33xx/clock.c | 8 |
2 files changed, 93 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index e4c123c..da5bc73 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -33,6 +33,11 @@ #include <i2c.h> #include <miiphy.h> #include <cpsw.h> +#include <asm/errno.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/musb.h> +#include <asm/omap_musb.h> DECLARE_GLOBAL_DATA_PTR; @@ -63,3 +68,83 @@ void setup_clocks_for_console(void) /* Not yet implemented */ return; } + +/* AM33XX has two MUSB controllers which can be host or gadget */ +#if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \ + (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +/* USB 2.0 PHY Control */ +#define CM_PHY_PWRDN (1 << 0) +#define CM_PHY_OTG_PWRDN (1 << 1) +#define OTGVDET_EN (1 << 19) +#define OTGSESSENDEN (1 << 20) + +static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr) +{ + if (on) { + clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN, + OTGVDET_EN | OTGSESSENDEN); + } else { + clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN); + } +} + +static struct musb_hdrc_config musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .num_eps = 16, + .ram_bits = 12, +}; + +#ifdef CONFIG_AM335X_USB0 +static void am33xx_otg0_set_phy_power(u8 on) +{ + am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0); +} + +struct omap_musb_board_data otg0_board_data = { + .set_phy_power = am33xx_otg0_set_phy_power, +}; + +static struct musb_hdrc_platform_data otg0_plat = { + .mode = CONFIG_AM335X_USB0_MODE, + .config = &musb_config, + .power = 50, + .platform_ops = &musb_dsps_ops, + .board_data = &otg0_board_data, +}; +#endif + +#ifdef CONFIG_AM335X_USB1 +static void am33xx_otg1_set_phy_power(u8 on) +{ + am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1); +} + +struct omap_musb_board_data otg1_board_data = { + .set_phy_power = am33xx_otg1_set_phy_power, +}; + +static struct musb_hdrc_platform_data otg1_plat = { + .mode = CONFIG_AM335X_USB1_MODE, + .config = &musb_config, + .power = 50, + .platform_ops = &musb_dsps_ops, + .board_data = &otg1_board_data, +}; +#endif +#endif + +int arch_misc_init(void) +{ +#ifdef CONFIG_AM335X_USB0 + musb_register(&otg0_plat, &otg0_board_data, + (void *)AM335X_USB0_OTG_BASE); +#endif +#ifdef CONFIG_AM335X_USB1 + musb_register(&otg1_plat, &otg1_board_data, + (void *)AM335X_USB1_OTG_BASE); +#endif + return 0; +} diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c index bc2abb6..0b4cb4e 100644 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -40,6 +40,7 @@ #define CLK_MODE_MASK 0xfffffff8 #define CLK_DIV_SEL 0xFFFFFFE0 #define CPGMAC0_IDLE 0x30000 +#define DPLL_CLKDCOLDO_GATE_CTRL 0x300 const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; @@ -194,6 +195,11 @@ static void enable_per_clocks(void) writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl); while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN) ; + + /* MUSB */ + writel(PRCM_MOD_EN, &cmper->usb0clkctrl); + while (readl(&cmper->usb0clkctrl) != PRCM_MOD_EN) + ; } static void mpu_pll_config(void) @@ -290,6 +296,8 @@ static void per_pll_config(void) while (readl(&cmwkup->idlestdpllper) != ST_DPLL_CLK) ; + + writel(DPLL_CLKDCOLDO_GATE_CTRL, &cmwkup->clkdcoldodpllper); } void ddr_pll_config(unsigned int ddrpll_m) |