diff options
Diffstat (limited to 'arch/arm/cpu/armv7/omap3')
| -rw-r--r-- | arch/arm/cpu/armv7/omap3/sdrc.c | 32 |
1 files changed, 31 insertions, 1 deletions
diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c index 2a7970b..0dd1955 100644 --- a/arch/arm/cpu/armv7/omap3/sdrc.c +++ b/arch/arm/cpu/armv7/omap3/sdrc.c @@ -8,6 +8,9 @@ * Copyright (C) 2004-2010 * Texas Instruments Incorporated - http://www.ti.com/ * + * Copyright (C) 2011 + * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de> + * * Author : * Vaibhav Hiremath <hvaibhav@ti.com> * @@ -133,13 +136,40 @@ void do_sdrc_init(u32 cs, u32 early) sdelay(0x20000); } +/* As long as V_MCFG and V_RFR_CTRL is not defined for all OMAP3 boards we need + * to prevent this to be build in non-SPL build */ +#ifdef CONFIG_SPL_BUILD + /* If we use a SPL there is no x-loader nor config header so we have + * to do the job ourselfs + */ + if (cs == CS0) { + sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; + + /* General SDRC config */ + writel(V_MCFG, &sdrc_base->cs[cs].mcfg); + writel(V_RFR_CTRL, &sdrc_base->cs[cs].rfr_ctrl); + + /* AC timings */ + writel(V_ACTIMA_165, &sdrc_actim_base0->ctrla); + writel(V_ACTIMB_165, &sdrc_actim_base0->ctrlb); + + /* Initialize */ + writel(CMD_NOP, &sdrc_base->cs[cs].manual); + writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual); + writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); + writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); + + writel(V_MR, &sdrc_base->cs[cs].mr); + } +#endif + /* * SDRC timings are set up by x-load or config header * We don't need to redo them here. * Older x-loads configure only CS0 * configure CS1 to handle this ommission */ - if (cs) { + if (cs == CS1) { sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE; writel(readl(&sdrc_base->cs[CS0].mcfg), |