summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv7/omap3/emif4.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu/armv7/omap3/emif4.c')
-rw-r--r--arch/arm/cpu/armv7/omap3/emif4.c168
1 files changed, 168 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c
new file mode 100644
index 0000000..fae5b11
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap3/emif4.c
@@ -0,0 +1,168 @@
+/*
+ * Author :
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Based on mem.c and sdrc.c
+ *
+ * Copyright (C) 2010
+ * Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/emif4.h>
+
+extern omap3_sysinfo sysinfo;
+
+static emif4_t *emif4_base = (emif4_t *)OMAP34XX_SDRC_BASE;
+
+/*
+ * is_mem_sdr -
+ * - Return 1 if mem type in use is SDR
+ */
+u32 is_mem_sdr(void)
+{
+ return 0;
+}
+
+/*
+ * get_sdr_cs_size -
+ * - Get size of chip select 0/1
+ */
+u32 get_sdr_cs_size(u32 cs)
+{
+ u32 size;
+
+ /* TODO: Calculate the size based on EMIF4 configuration */
+ size = CONFIG_SYS_CS0_SIZE;
+
+ return size;
+}
+
+/*
+ * get_sdr_cs_offset -
+ * - Get offset of cs from cs0 start
+ */
+u32 get_sdr_cs_offset(u32 cs)
+{
+ u32 offset = 0;
+
+ return offset;
+}
+
+/*
+ * do_emif4_init -
+ * - Init the emif4 module for DDR access
+ * - Early init routines, called from flash or SRAM.
+ */
+void do_emif4_init(void)
+{
+ unsigned int regval;
+ /* Set the DDR PHY parameters in PHY ctrl registers */
+ regval = (EMIF4_DDR1_READ_LAT | EMIF4_DDR1_PWRDN_DIS |
+ EMIF4_DDR1_EXT_STRB_DIS);
+ writel(regval, &emif4_base->ddr_phyctrl1);
+ writel(regval, &emif4_base->ddr_phyctrl1_shdw);
+ writel(0, &emif4_base->ddr_phyctrl2);
+
+ /* Reset the DDR PHY and wait till completed */
+ regval = readl(&emif4_base->sdram_iodft_tlgc);
+ regval |= (1<<10);
+ writel(regval, &emif4_base->sdram_iodft_tlgc);
+ /*Wait till that bit clears*/
+ while ((readl(&emif4_base->sdram_iodft_tlgc) & (1<<10)) == 0x1);
+ /*Re-verify the DDR PHY status*/
+ while ((readl(&emif4_base->sdram_sts) & (1<<2)) == 0x0);
+
+ regval |= (1<<0);
+ writel(regval, &emif4_base->sdram_iodft_tlgc);
+ /* Set SDR timing registers */
+ regval = (EMIF4_TIM1_T_WTR | EMIF4_TIM1_T_RRD |
+ EMIF4_TIM1_T_RC | EMIF4_TIM1_T_RAS |
+ EMIF4_TIM1_T_WR | EMIF4_TIM1_T_RCD |
+ EMIF4_TIM1_T_RP);
+ writel(regval, &emif4_base->sdram_time1);
+ writel(regval, &emif4_base->sdram_time1_shdw);
+
+ regval = (EMIF4_TIM2_T_CKE | EMIF4_TIM2_T_RTP |
+ EMIF4_TIM2_T_XSRD | EMIF4_TIM2_T_XSNR |
+ EMIF4_TIM2_T_ODT | EMIF4_TIM2_T_XP);
+ writel(regval, &emif4_base->sdram_time2);
+ writel(regval, &emif4_base->sdram_time2_shdw);
+
+ regval = (EMIF4_TIM3_T_RAS_MAX | EMIF4_TIM3_T_RFC);
+ writel(regval, &emif4_base->sdram_time3);
+ writel(regval, &emif4_base->sdram_time3_shdw);
+
+ /* Set the PWR control register */
+ regval = (EMIF4_PWR_PM_TIM | EMIF4_PWR_LP_MODE |
+ EMIF4_PWR_DPD_DIS | EMIF4_PWR_IDLE_MODE);
+ writel(regval, &emif4_base->sdram_pwr_mgmt);
+ writel(regval, &emif4_base->sdram_pwr_mgmt_shdw);
+
+ /* Set the DDR refresh rate control register */
+ regval = (EMIF4_REFRESH_RATE | EMIF4_INITREF_DIS);
+ writel(regval, &emif4_base->sdram_refresh_ctrl);
+ writel(regval, &emif4_base->sdram_refresh_ctrl_shdw);
+
+ /* set the SDRAM configuration register */
+ regval = (EMIF4_CFG_PGSIZE | EMIF4_CFG_EBANK |
+ EMIF4_CFG_IBANK | EMIF4_CFG_ROWSIZE |
+ EMIF4_CFG_CL | EMIF4_CFG_NARROW_MD |
+ EMIF4_CFG_SDR_DRV | EMIF4_CFG_DDR_DIS_DLL |
+ EMIF4_CFG_DDR2_DDQS | EMIF4_CFG_DDR_TERM |
+ EMIF4_CFG_IBANK_POS | EMIF4_CFG_SDRAM_TYP);
+ writel(regval, &emif4_base->sdram_config);
+}
+
+/*
+ * dram_init -
+ * - Sets uboots idea of sdram size
+ */
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int size0 = 0, size1 = 0;
+
+ size0 = get_sdr_cs_size(CS0);
+ /*
+ * If a second bank of DDR is attached to CS1 this is
+ * where it can be started. Early init code will init
+ * memory on CS0.
+ */
+ if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED))
+ size1 = get_sdr_cs_size(CS1);
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = size0;
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(CS1);
+ gd->bd->bi_dram[1].size = size1;
+
+ return 0;
+}
+
+/*
+ * mem_init() -
+ * - Initialize memory subsystem
+ */
+void mem_init(void)
+{
+ do_emif4_init();
+}