1 files changed, 0 insertions, 90 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
deleted file mode 100644
index 8ce12c8..0000000
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- *	Aneesh V	<aneesh@ti.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-#include <asm/arch/omap.h>
-#include <asm/omap_common.h>
-#include <asm/arch/spl.h>
-#include <linux/linkage.h>
-
-.arch_extension sec
-
-#ifdef CONFIG_SPL
-ENTRY(save_boot_params)
-	ldr	r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS
-	str	r0, [r1]
-	b	save_boot_params_ret
-ENDPROC(save_boot_params)
-
-#if !defined(CONFIG_TI_SECURE_DEVICE) && defined(CONFIG_ARMV7_LPAE)
-ENTRY(switch_to_hypervisor)
-
-/*
- * Switch to hypervisor mode
- */
-	adr	r0, save_sp
-	str	sp, [r0]
-	adr	r1, restore_from_hyp
-	ldr	r0, =0x102
-	b	omap_smc1
-restore_from_hyp:
-	adr	r0, save_sp
-	ldr	sp, [r0]
-	MRC p15, 4, R0, c1, c0, 0
-	ldr     r1, =0X1004	@Set cache enable bits for hypervisor mode
-	orr     r0, r0, r1
-	MCR p15, 4, R0, c1, c0, 0
-	b	switch_to_hypervisor_ret
-save_sp:
-	.word	0x0
-ENDPROC(switch_to_hypervisor)
-#endif
-#endif
-
-ENTRY(omap_smc1)
-	push	{r4-r12, lr}	@ save registers - ROM code may pollute
-				@ our registers
-	mov	r12, r0		@ Service
-	mov	r0, r1		@ Argument
-
-	dsb
-	dmb
-	smc	0		@ SMC #0 to enter monitor mode
-				@ call ROM Code API for the service requested
-	pop	{r4-r12, pc}
-ENDPROC(omap_smc1)
-
-ENTRY(omap_smc_sec)
-	push	{r4-r12, lr}	@ save registers - ROM code may pollute
-				@ our registers
-	mov	r6, #0xFF	@ Indicate new Task call
-	mov	r12, #0x00	@ Secure Service ID in R12
-
-	dsb
-	dmb
-	smc	0		@ SMC #0 to enter monitor mode
-
-	b	omap_smc_sec_end @ exit at end of the service execution
-	nop
-
-	@ In case of IRQ happening in Secure, then ARM will branch here.
-	@ At that moment, IRQ will be pending and ARM will jump to Non Secure
-	@ IRQ handler
-	mov	r12, #0xFE
-
-	dsb
-	dmb
-	smc	0		@ SMC #0 to enter monitor mode
-
-omap_smc_sec_end:
-	pop	{r4-r12, pc}
-ENDPROC(omap_smc_sec)