diff options
Diffstat (limited to 'arch/arm/cpu/arm926ejs')
| -rw-r--r-- | arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 2 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c | 76 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 38 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c | 74 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/at91/lowlevel_init.S | 2 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mb86r0x/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c | 65 |
7 files changed, 166 insertions, 93 deletions
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c index 6bdc75c..65b8d51 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c @@ -138,7 +138,7 @@ void at91_spi1_hw_init(unsigned long cs_mask) at91_set_b_periph(AT91_PIO_PORTC, 4, 1); } if (cs_mask & (1 << 3)) { - at91_set_pio_output(AT91_PIO_PORTC, 3, 1); + at91_set_b_periph(AT91_PIO_PORTC, 3, 1); } if (cs_mask & (1 << 4)) { at91_set_pio_output(AT91_PIO_PORTB, 3, 1); diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c index b4353ef..edc7972 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c @@ -23,77 +23,73 @@ */ #include <common.h> +#include <asm/io.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/gpio.h> -#include <asm/arch/io.h> + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif void at91_serial0_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTC, 8, 1); /* TXD0 */ at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* RXD0 */ - writel(1 << AT91SAM9261_ID_US0, &pmc->pcer); + writel(1 << ATMEL_ID_USART0, &pmc->pcer); } void at91_serial1_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTC, 12, 1); /* TXD1 */ at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RXD1 */ - writel(1 << AT91SAM9261_ID_US1, &pmc->pcer); + writel(1 << ATMEL_ID_USART1, &pmc->pcer); } void at91_serial2_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTC, 14, 1); /* TXD2 */ at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* RXD2 */ - writel(1 << AT91SAM9261_ID_US2, &pmc->pcer); + writel(1 << ATMEL_ID_USART2, &pmc->pcer); } -void at91_serial3_hw_init(void) +void at91_seriald_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ - writel(1 << AT91_ID_SYS, &pmc->pcer); -} - -void at91_serial_hw_init(void) -{ -#ifdef CONFIG_USART0 - at91_serial0_hw_init(); -#endif - -#ifdef CONFIG_USART1 - at91_serial1_hw_init(); -#endif - -#ifdef CONFIG_USART2 - at91_serial2_hw_init(); -#endif - -#ifdef CONFIG_USART3 /* DBGU */ - at91_serial3_hw_init(); -#endif + writel(1 << ATMEL_ID_SYS, &pmc->pcer); } -#ifdef CONFIG_HAS_DATAFLASH +#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) void at91_spi0_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */ + at91_set_a_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ /* Enable clock */ - writel(1 << AT91SAM9261_ID_SPI0, &pmc->pcer); + writel(1 << ATMEL_ID_SPI0, &pmc->pcer); if (cs_mask & (1 << 0)) { at91_set_a_periph(AT91_PIO_PORTA, 3, 1); @@ -123,14 +119,14 @@ void at91_spi0_hw_init(unsigned long cs_mask) void at91_spi1_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* SPI1_MISO */ - at91_set_a_periph(AT91_PIO_PORTB, 31, 0); /* SPI1_MOSI */ - at91_set_a_periph(AT91_PIO_PORTB, 29, 0); /* SPI1_SPCK */ + at91_set_a_periph(AT91_PIO_PORTB, 30, PUP); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 31, PUP); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 29, PUP); /* SPI1_SPCK */ /* Enable clock */ - writel(1 << AT91SAM9261_ID_SPI1, &pmc->pcer); + writel(1 << ATMEL_ID_SPI1, &pmc->pcer); if (cs_mask & (1 << 0)) { at91_set_a_periph(AT91_PIO_PORTB, 28, 1); diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c index 15e880a..6eb0f30 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c @@ -28,17 +28,31 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/hardware.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_pio.h> +#include <asm/arch/gpio.h> + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif void at91_serial0_hw_init(void) { at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTA, 26, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* RXD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* RXD0 */ writel(1 << ATMEL_ID_USART0, &pmc->pcer); } @@ -47,7 +61,7 @@ void at91_serial1_hw_init(void) at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* RXD1 */ + at91_set_a_periph(AT91_PIO_PORTD, 1, PUP); /* RXD1 */ writel(1 << ATMEL_ID_USART1, &pmc->pcer); } @@ -56,7 +70,7 @@ void at91_serial2_hw_init(void) at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */ - at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* RXD2 */ + at91_set_a_periph(AT91_PIO_PORTD, 3, PUP); /* RXD2 */ writel(1 << ATMEL_ID_USART2, &pmc->pcer); } @@ -64,7 +78,7 @@ void at91_seriald_hw_init(void) { at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTC, 30, PUP); /* DRXD */ at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */ writel(1 << ATMEL_ID_SYS, &pmc->pcer); } @@ -74,9 +88,9 @@ void at91_spi0_hw_init(unsigned long cs_mask) { at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_b_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */ - at91_set_b_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */ - at91_set_b_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */ + at91_set_b_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ + at91_set_b_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ + at91_set_b_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ /* Enable clock */ writel(1 << ATMEL_ID_SPI0, &pmc->pcer); @@ -111,9 +125,9 @@ void at91_spi1_hw_init(unsigned long cs_mask) { at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* SPI1_MISO */ - at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* SPI1_MOSI */ - at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* SPI1_SPCK */ + at91_set_a_periph(AT91_PIO_PORTB, 12, PUP); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 13, PUP); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_SPCK */ /* Enable clock */ writel(1 << ATMEL_ID_SPI1, &pmc->pcer); diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c index 4f570f4..b0a1687 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c @@ -23,77 +23,73 @@ */ #include <common.h> +#include <asm/io.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/gpio.h> -#include <asm/arch/io.h> + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif void at91_serial0_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTA, 6, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* RXD0 */ - writel(1 << AT91SAM9RL_ID_US0, &pmc->pcer); + at91_set_a_periph(AT91_PIO_PORTA, 7, PUP); /* RXD0 */ + writel(1 << ATMEL_ID_USART0, &pmc->pcer); } void at91_serial1_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTA, 11, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* RXD1 */ - writel(1 << AT91SAM9RL_ID_US1, &pmc->pcer); + at91_set_a_periph(AT91_PIO_PORTA, 12, PUP); /* RXD1 */ + writel(1 << ATMEL_ID_USART1, &pmc->pcer); } void at91_serial2_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTA, 13, 1); /* TXD2 */ - at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* RXD2 */ - writel(1 << AT91SAM9RL_ID_US2, &pmc->pcer); + at91_set_a_periph(AT91_PIO_PORTA, 14, PUP); /* RXD2 */ + writel(1 << ATMEL_ID_USART2, &pmc->pcer); } -void at91_serial3_hw_init(void) +void at91_seriald_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTA, 21, PUP); /* DRXD */ at91_set_a_periph(AT91_PIO_PORTA, 22, 1); /* DTXD */ - writel(1 << AT91_ID_SYS, &pmc->pcer); -} - -void at91_serial_hw_init(void) -{ -#ifdef CONFIG_USART0 - at91_serial0_hw_init(); -#endif - -#ifdef CONFIG_USART1 - at91_serial1_hw_init(); -#endif - -#ifdef CONFIG_USART2 - at91_serial2_hw_init(); -#endif - -#ifdef CONFIG_USART3 /* DBGU */ - at91_serial3_hw_init(); -#endif + writel(1 << ATMEL_ID_SYS, &pmc->pcer); } -#ifdef CONFIG_HAS_DATAFLASH +#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI) void at91_spi0_hw_init(unsigned long cs_mask) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* SPI0_MISO */ - at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* SPI0_MOSI */ - at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* SPI0_SPCK */ + at91_set_a_periph(AT91_PIO_PORTA, 25, PUP); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 26, PUP); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* SPI0_SPCK */ /* Enable clock */ - writel(1 << AT91SAM9RL_ID_SPI, &pmc->pcer); + writel(1 << ATMEL_ID_SPI, &pmc->pcer); if (cs_mask & (1 << 0)) { at91_set_a_periph(AT91_PIO_PORTA, 28, 1); diff --git a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S b/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S index 17ff0dd..d102195 100644 --- a/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S +++ b/arch/arm/cpu/arm926ejs/at91/lowlevel_init.S @@ -35,7 +35,7 @@ #include <asm/arch/at91sam9_sdramc.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_rstc.h> -#ifdef CONFIG_AT91_LEGACY +#ifdef CONFIG_ATMEL_LEGACY #include <asm/arch/at91sam9_matrix.h> #endif #ifndef CONFIG_SYS_MATRIX_EBICSA_VAL diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/Makefile b/arch/arm/cpu/arm926ejs/mb86r0x/Makefile index bab048b..974d0be 100644 --- a/arch/arm/cpu/arm926ejs/mb86r0x/Makefile +++ b/arch/arm/cpu/arm926ejs/mb86r0x/Makefile @@ -37,6 +37,8 @@ all: $(obj).depend $(LIB) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) +$(OBJS) : $(TOPDIR)/include/asm/arch/asm-offsets.h + ######################################################################### # defines $(obj).depend target diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c b/arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c new file mode 100644 index 0000000..6f9c722 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mb86r0x/asm-offsets.c @@ -0,0 +1,65 @@ +/* + * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c + * + * This program is used to generate definitions needed by + * assembly language modules. + * + * We use the technique used in the OSF Mach kernel code: + * generate asm statements containing #defines, + * compile this file to assembler, and then extract the + * #defines from the assembly-language output. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <common.h> +#include <asm/arch/mb86r0x.h> + +#include <linux/kbuild.h> + +int main(void) +{ + /* ddr2 controller */ + DEFINE(DDR2_DRIC, offsetof(struct mb86r0x_ddr2c, dric)); + DEFINE(DDR2_DRIC1, offsetof(struct mb86r0x_ddr2c, dric1)); + DEFINE(DDR2_DRIC2, offsetof(struct mb86r0x_ddr2c, dric2)); + DEFINE(DDR2_DRCA, offsetof(struct mb86r0x_ddr2c, drca)); + DEFINE(DDR2_DRCM, offsetof(struct mb86r0x_ddr2c, drcm)); + DEFINE(DDR2_DRCST1, offsetof(struct mb86r0x_ddr2c, drcst1)); + DEFINE(DDR2_DRCST2, offsetof(struct mb86r0x_ddr2c, drcst2)); + DEFINE(DDR2_DRCR, offsetof(struct mb86r0x_ddr2c, drcr)); + DEFINE(DDR2_DRCF, offsetof(struct mb86r0x_ddr2c, drcf)); + DEFINE(DDR2_DRASR, offsetof(struct mb86r0x_ddr2c, drasr)); + DEFINE(DDR2_DRIMS, offsetof(struct mb86r0x_ddr2c, drims)); + DEFINE(DDR2_DROS, offsetof(struct mb86r0x_ddr2c, dros)); + DEFINE(DDR2_DRIBSODT1, offsetof(struct mb86r0x_ddr2c, dribsodt1)); + DEFINE(DDR2_DROABA, offsetof(struct mb86r0x_ddr2c, droaba)); + DEFINE(DDR2_DROBS, offsetof(struct mb86r0x_ddr2c, drobs)); + + /* clock reset generator */ + DEFINE(CRG_CRPR, offsetof(struct mb86r0x_crg, crpr)); + DEFINE(CRG_CRHA, offsetof(struct mb86r0x_crg, crha)); + DEFINE(CRG_CRPA, offsetof(struct mb86r0x_crg, crpa)); + DEFINE(CRG_CRPB, offsetof(struct mb86r0x_crg, crpb)); + DEFINE(CRG_CRHB, offsetof(struct mb86r0x_crg, crhb)); + DEFINE(CRG_CRAM, offsetof(struct mb86r0x_crg, cram)); + + /* chip control module */ + DEFINE(CCNT_CDCRC, offsetof(struct mb86r0x_ccnt, cdcrc)); + + /* external bus interface */ + DEFINE(MEMC_MCFMODE0, offsetof(struct mb86r0x_memc, mcfmode[0])); + DEFINE(MEMC_MCFMODE2, offsetof(struct mb86r0x_memc, mcfmode[2])); + DEFINE(MEMC_MCFMODE4, offsetof(struct mb86r0x_memc, mcfmode[4])); + DEFINE(MEMC_MCFTIM0, offsetof(struct mb86r0x_memc, mcftim[0])); + DEFINE(MEMC_MCFTIM2, offsetof(struct mb86r0x_memc, mcftim[2])); + DEFINE(MEMC_MCFTIM4, offsetof(struct mb86r0x_memc, mcftim[4])); + DEFINE(MEMC_MCFAREA0, offsetof(struct mb86r0x_memc, mcfarea[0])); + DEFINE(MEMC_MCFAREA2, offsetof(struct mb86r0x_memc, mcfarea[2])); + DEFINE(MEMC_MCFAREA4, offsetof(struct mb86r0x_memc, mcfarea[4])); + + return 0; +} |