diff options
Diffstat (limited to 'arch/arm/cpu/arm926ejs/mx28')
-rw-r--r-- | arch/arm/cpu/arm926ejs/mx28/Makefile | 46 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/mx28/clock.c | 355 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/mx28/iomux.c | 109 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/mx28/mx28.c | 221 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/mx28/timer.c | 141 |
5 files changed, 872 insertions, 0 deletions
diff --git a/arch/arm/cpu/arm926ejs/mx28/Makefile b/arch/arm/cpu/arm926ejs/mx28/Makefile new file mode 100644 index 0000000..7845310 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mx28/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS = clock.o mx28.o iomux.o timer.o + +SRCS := $(START:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/arm926ejs/mx28/clock.c b/arch/arm/cpu/arm926ejs/mx28/clock.c new file mode 100644 index 0000000..f698506 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mx28/clock.c @@ -0,0 +1,355 @@ +/* + * Freescale i.MX28 clock setup code + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> + +/* The PLL frequency is always 480MHz, see section 10.2 in iMX28 datasheet. */ +#define PLL_FREQ_KHZ 480000 +#define PLL_FREQ_COEF 18 +/* The XTAL frequency is always 24MHz, see section 10.2 in iMX28 datasheet. */ +#define XTAL_FREQ_KHZ 24000 + +#define PLL_FREQ_MHZ (PLL_FREQ_KHZ / 1000) +#define XTAL_FREQ_MHZ (XTAL_FREQ_KHZ / 1000) + +static uint32_t mx28_get_pclk(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + uint32_t clkctrl, clkseq, clkfrac; + uint32_t frac, div; + + clkctrl = readl(&clkctrl_regs->hw_clkctrl_cpu); + + /* No support of fractional divider calculation */ + if (clkctrl & + (CLKCTRL_CPU_DIV_XTAL_FRAC_EN | CLKCTRL_CPU_DIV_CPU_FRAC_EN)) { + return 0; + } + + clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq); + + /* XTAL Path */ + if (clkseq & CLKCTRL_CLKSEQ_BYPASS_CPU) { + div = (clkctrl & CLKCTRL_CPU_DIV_XTAL_MASK) >> + CLKCTRL_CPU_DIV_XTAL_OFFSET; + return XTAL_FREQ_MHZ / div; + } + + /* REF Path */ + clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac0); + frac = clkfrac & CLKCTRL_FRAC0_CPUFRAC_MASK; + div = clkctrl & CLKCTRL_CPU_DIV_CPU_MASK; + return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div; +} + +static uint32_t mx28_get_hclk(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + uint32_t div; + uint32_t clkctrl; + + clkctrl = readl(&clkctrl_regs->hw_clkctrl_hbus); + + /* No support of fractional divider calculation */ + if (clkctrl & CLKCTRL_HBUS_DIV_FRAC_EN) + return 0; + + div = clkctrl & CLKCTRL_HBUS_DIV_MASK; + return mx28_get_pclk() / div; +} + +static uint32_t mx28_get_emiclk(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + uint32_t frac, div; + uint32_t clkctrl, clkseq, clkfrac; + + clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq); + clkctrl = readl(&clkctrl_regs->hw_clkctrl_emi); + + /* XTAL Path */ + if (clkseq & CLKCTRL_CLKSEQ_BYPASS_EMI) { + div = (clkctrl & CLKCTRL_EMI_DIV_XTAL_MASK) >> + CLKCTRL_EMI_DIV_XTAL_OFFSET; + return XTAL_FREQ_MHZ / div; + } + + clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac0); + + /* REF Path */ + frac = (clkfrac & CLKCTRL_FRAC0_EMIFRAC_MASK) >> + CLKCTRL_FRAC0_EMIFRAC_OFFSET; + div = clkctrl & CLKCTRL_EMI_DIV_EMI_MASK; + return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div; +} + +static uint32_t mx28_get_gpmiclk(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + uint32_t frac, div; + uint32_t clkctrl, clkseq, clkfrac; + + clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq); + clkctrl = readl(&clkctrl_regs->hw_clkctrl_gpmi); + + /* XTAL Path */ + if (clkseq & CLKCTRL_CLKSEQ_BYPASS_GPMI) { + div = clkctrl & CLKCTRL_GPMI_DIV_MASK; + return XTAL_FREQ_MHZ / div; + } + + clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac1); + + /* REF Path */ + frac = (clkfrac & CLKCTRL_FRAC1_GPMIFRAC_MASK) >> + CLKCTRL_FRAC1_GPMIFRAC_OFFSET; + div = clkctrl & CLKCTRL_GPMI_DIV_MASK; + return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div; +} + +/* + * Set IO clock frequency, in kHz + */ +void mx28_set_ioclk(enum mxs_ioclock io, uint32_t freq) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + uint32_t div; + + if (freq == 0) + return; + + if (io > MXC_IOCLK1) + return; + + div = (PLL_FREQ_KHZ * PLL_FREQ_COEF) / freq; + + if (div < 18) + div = 18; + + if (div > 35) + div = 35; + + if (io == MXC_IOCLK0) { + writel(CLKCTRL_FRAC0_CLKGATEIO0, + &clkctrl_regs->hw_clkctrl_frac0_set); + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0, + CLKCTRL_FRAC0_IO0FRAC_MASK, + div << CLKCTRL_FRAC0_IO0FRAC_OFFSET); + writel(CLKCTRL_FRAC0_CLKGATEIO0, + &clkctrl_regs->hw_clkctrl_frac0_clr); + } else { + writel(CLKCTRL_FRAC0_CLKGATEIO1, + &clkctrl_regs->hw_clkctrl_frac0_set); + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0, + CLKCTRL_FRAC0_IO1FRAC_MASK, + div << CLKCTRL_FRAC0_IO1FRAC_OFFSET); + writel(CLKCTRL_FRAC0_CLKGATEIO1, + &clkctrl_regs->hw_clkctrl_frac0_clr); + } +} + +/* + * Get IO clock, returns IO clock in kHz + */ +static uint32_t mx28_get_ioclk(enum mxs_ioclock io) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + uint32_t tmp, ret; + + if (io > MXC_IOCLK1) + return 0; + + tmp = readl(&clkctrl_regs->hw_clkctrl_frac0); + + if (io == MXC_IOCLK0) + ret = (tmp & CLKCTRL_FRAC0_IO0FRAC_MASK) >> + CLKCTRL_FRAC0_IO0FRAC_OFFSET; + else + ret = (tmp & CLKCTRL_FRAC0_IO1FRAC_MASK) >> + CLKCTRL_FRAC0_IO1FRAC_OFFSET; + + return (PLL_FREQ_KHZ * PLL_FREQ_COEF) / ret; +} + +/* + * Configure SSP clock frequency, in kHz + */ +void mx28_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + uint32_t clk, clkreg; + + if (ssp > MXC_SSPCLK3) + return; + + clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) + + (ssp * sizeof(struct mx28_register)); + + clrbits_le32(clkreg, CLKCTRL_SSP_CLKGATE); + while (readl(clkreg) & CLKCTRL_SSP_CLKGATE) + ; + + if (xtal) + clk = XTAL_FREQ_KHZ; + else + clk = mx28_get_ioclk(ssp >> 1); + + if (freq > clk) + return; + + /* Calculate the divider and cap it if necessary */ + clk /= freq; + if (clk > CLKCTRL_SSP_DIV_MASK) + clk = CLKCTRL_SSP_DIV_MASK; + + clrsetbits_le32(clkreg, CLKCTRL_SSP_DIV_MASK, clk); + while (readl(clkreg) & CLKCTRL_SSP_BUSY) + ; + + if (xtal) + writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp, + &clkctrl_regs->hw_clkctrl_clkseq_set); + else + writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp, + &clkctrl_regs->hw_clkctrl_clkseq_clr); +} + +/* + * Return SSP frequency, in kHz + */ +static uint32_t mx28_get_sspclk(enum mxs_sspclock ssp) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + uint32_t clkreg; + uint32_t clk, tmp; + + if (ssp > MXC_SSPCLK3) + return 0; + + tmp = readl(&clkctrl_regs->hw_clkctrl_clkseq); + if (tmp & (CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp)) + return XTAL_FREQ_KHZ; + + clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) + + (ssp * sizeof(struct mx28_register)); + + tmp = readl(clkreg) & CLKCTRL_SSP_DIV_MASK; + + if (tmp == 0) + return 0; + + clk = mx28_get_ioclk(ssp >> 1); + + return clk / tmp; +} + +/* + * Set SSP/MMC bus frequency, in kHz) + */ +void mx28_set_ssp_busclock(unsigned int bus, uint32_t freq) +{ + struct mx28_ssp_regs *ssp_regs; + const uint32_t sspclk = mx28_get_sspclk(bus); + uint32_t reg; + uint32_t divide, rate, tgtclk; + + ssp_regs = (struct mx28_ssp_regs *)(MXS_SSP0_BASE + (bus * 0x2000)); + + /* + * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)), + * CLOCK_DIVIDE has to be an even value from 2 to 254, and + * CLOCK_RATE could be any integer from 0 to 255. + */ + for (divide = 2; divide < 254; divide += 2) { + rate = sspclk / freq / divide; + if (rate <= 256) + break; + } + + tgtclk = sspclk / divide / rate; + while (tgtclk > freq) { + rate++; + tgtclk = sspclk / divide / rate; + } + if (rate > 256) + rate = 256; + + /* Always set timeout the maximum */ + reg = SSP_TIMING_TIMEOUT_MASK | + (divide << SSP_TIMING_CLOCK_DIVIDE_OFFSET) | + ((rate - 1) << SSP_TIMING_CLOCK_RATE_OFFSET); + writel(reg, &ssp_regs->hw_ssp_timing); + + debug("SPI%d: Set freq rate to %d KHz (requested %d KHz)\n", + bus, tgtclk, freq); +} + +uint32_t mxc_get_clock(enum mxc_clock clk) +{ + switch (clk) { + case MXC_ARM_CLK: + return mx28_get_pclk() * 1000000; + case MXC_GPMI_CLK: + return mx28_get_gpmiclk() * 1000000; + case MXC_AHB_CLK: + case MXC_IPG_CLK: + return mx28_get_hclk() * 1000000; + case MXC_EMI_CLK: + return mx28_get_emiclk(); + case MXC_IO0_CLK: + return mx28_get_ioclk(MXC_IOCLK0); + case MXC_IO1_CLK: + return mx28_get_ioclk(MXC_IOCLK1); + case MXC_SSP0_CLK: + return mx28_get_sspclk(MXC_SSPCLK0); + case MXC_SSP1_CLK: + return mx28_get_sspclk(MXC_SSPCLK1); + case MXC_SSP2_CLK: + return mx28_get_sspclk(MXC_SSPCLK2); + case MXC_SSP3_CLK: + return mx28_get_sspclk(MXC_SSPCLK3); + } + + return 0; +} diff --git a/arch/arm/cpu/arm926ejs/mx28/iomux.c b/arch/arm/cpu/arm926ejs/mx28/iomux.c new file mode 100644 index 0000000..9ea411f --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mx28/iomux.c @@ -0,0 +1,109 @@ +/* + * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * <armlinux@phytec.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/iomux.h> +#include <asm/arch/imx-regs.h> + +#if defined(CONFIG_MX23) +#define DRIVE_OFFSET 0x200 +#define PULL_OFFSET 0x400 +#elif defined(CONFIG_MX28) +#define DRIVE_OFFSET 0x300 +#define PULL_OFFSET 0x600 +#else +#error "Please select CONFIG_MX23 or CONFIG_MX28" +#endif + +/* + * configures a single pad in the iomuxer + */ +int mxs_iomux_setup_pad(iomux_cfg_t pad) +{ + u32 reg, ofs, bp, bm; + void *iomux_base = (void *)MXS_PINCTRL_BASE; + struct mx28_register *mxs_reg; + + /* muxsel */ + ofs = 0x100; + ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10; + bp = PAD_PIN(pad) % 16 * 2; + bm = 0x3 << bp; + reg = readl(iomux_base + ofs); + reg &= ~bm; + reg |= PAD_MUXSEL(pad) << bp; + writel(reg, iomux_base + ofs); + + /* drive */ + ofs = DRIVE_OFFSET; + ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10; + /* mA */ + if (PAD_MA_VALID(pad)) { + bp = PAD_PIN(pad) % 8 * 4; + bm = 0x3 << bp; + reg = readl(iomux_base + ofs); + reg &= ~bm; + reg |= PAD_MA(pad) << bp; + writel(reg, iomux_base + ofs); + } + /* vol */ + if (PAD_VOL_VALID(pad)) { + bp = PAD_PIN(pad) % 8 * 4 + 2; + mxs_reg = (struct mx28_register *)(iomux_base + ofs); + if (PAD_VOL(pad)) + writel(1 << bp, &mxs_reg->reg_set); + else + writel(1 << bp, &mxs_reg->reg_clr); + } + + /* pull */ + if (PAD_PULL_VALID(pad)) { + ofs = PULL_OFFSET; + ofs += PAD_BANK(pad) * 0x10; + bp = PAD_PIN(pad); + mxs_reg = (struct mx28_register *)(iomux_base + ofs); + if (PAD_PULL(pad)) + writel(1 << bp, &mxs_reg->reg_set); + else + writel(1 << bp, &mxs_reg->reg_clr); + } + + return 0; +} + +int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count) +{ + const iomux_cfg_t *p = pad_list; + int i; + int ret; + + for (i = 0; i < count; i++) { + ret = mxs_iomux_setup_pad(*p); + if (ret) + return ret; + p++; + } + + return 0; +} diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c new file mode 100644 index 0000000..088c019 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c @@ -0,0 +1,221 @@ +/* + * Freescale i.MX28 common code + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/iomux.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* 1 second delay should be plenty of time for block reset. */ +#define RESET_MAX_TIMEOUT 1000000 + +#define MX28_BLOCK_SFTRST (1 << 31) +#define MX28_BLOCK_CLKGATE (1 << 30) + +/* Lowlevel init isn't used on i.MX28, so just have a dummy here */ +inline void lowlevel_init(void) {} + +void reset_cpu(ulong ignored) __attribute__((noreturn)); + +void reset_cpu(ulong ignored) +{ + + struct mx28_rtc_regs *rtc_regs = + (struct mx28_rtc_regs *)MXS_RTC_BASE; + + /* Wait 1 uS before doing the actual watchdog reset */ + writel(1, &rtc_regs->hw_rtc_watchdog); + writel(RTC_CTRL_WATCHDOGEN, &rtc_regs->hw_rtc_ctrl_set); + + /* Endless loop, reset will exit from here */ + for (;;) + ; +} + +int mx28_wait_mask_set(struct mx28_register *reg, uint32_t mask, int timeout) +{ + while (--timeout) { + if ((readl(®->reg) & mask) == mask) + break; + udelay(1); + } + + return !timeout; +} + +int mx28_wait_mask_clr(struct mx28_register *reg, uint32_t mask, int timeout) +{ + while (--timeout) { + if ((readl(®->reg) & mask) == 0) + break; + udelay(1); + } + + return !timeout; +} + +int mx28_reset_block(struct mx28_register *reg) +{ + /* Clear SFTRST */ + writel(MX28_BLOCK_SFTRST, ®->reg_clr); + + if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) + return 1; + + /* Clear CLKGATE */ + writel(MX28_BLOCK_CLKGATE, ®->reg_clr); + + /* Set SFTRST */ + writel(MX28_BLOCK_SFTRST, ®->reg_set); + + /* Wait for CLKGATE being set */ + if (mx28_wait_mask_set(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) + return 1; + + /* Clear SFTRST */ + writel(MX28_BLOCK_SFTRST, ®->reg_clr); + + if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) + return 1; + + /* Clear CLKGATE */ + writel(MX28_BLOCK_CLKGATE, ®->reg_clr); + + if (mx28_wait_mask_clr(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) + return 1; + + return 0; +} + +void mx28_fixup_vt(uint32_t start_addr) +{ + uint32_t *vt = (uint32_t *)0x20; + int i; + + for (i = 0; i < 8; i++) + vt[i] = start_addr + (4 * i); +} + +#ifdef CONFIG_ARCH_MISC_INIT +int arch_misc_init(void) +{ + mx28_fixup_vt(gd->relocaddr); + return 0; +} +#endif + +#ifdef CONFIG_ARCH_CPU_INIT +int arch_cpu_init(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + extern uint32_t _start; + + mx28_fixup_vt((uint32_t)&_start); + + /* + * Enable NAND clock + */ + /* Clear bypass bit */ + writel(CLKCTRL_CLKSEQ_BYPASS_GPMI, + &clkctrl_regs->hw_clkctrl_clkseq_set); + + /* Set GPMI clock to ref_gpmi / 12 */ + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_gpmi, + CLKCTRL_GPMI_CLKGATE | CLKCTRL_GPMI_DIV_MASK, 1); + + udelay(1000); + + /* + * Configure GPIO unit + */ + mxs_gpio_init(); + + return 0; +} +#endif + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + printf("Freescale i.MX28 family\n"); + return 0; +} +#endif + +int do_mx28_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + printf("CPU: %3d MHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000); + printf("BUS: %3d MHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000000); + printf("EMI: %3d MHz\n", mxc_get_clock(MXC_EMI_CLK)); + printf("GPMI: %3d MHz\n", mxc_get_clock(MXC_GPMI_CLK) / 1000000); + return 0; +} + +/* + * Initializes on-chip ethernet controllers. + */ +#ifdef CONFIG_CMD_NET +int cpu_eth_init(bd_t *bis) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + /* Turn on ENET clocks */ + clrbits_le32(&clkctrl_regs->hw_clkctrl_enet, + CLKCTRL_ENET_SLEEP | CLKCTRL_ENET_DISABLE); + + /* Set up ENET PLL for 50 MHz */ + /* Power on ENET PLL */ + writel(CLKCTRL_PLL2CTRL0_POWER, + &clkctrl_regs->hw_clkctrl_pll2ctrl0_set); + + udelay(10); + + /* Gate on ENET PLL */ + writel(CLKCTRL_PLL2CTRL0_CLKGATE, + &clkctrl_regs->hw_clkctrl_pll2ctrl0_clr); + + /* Enable pad output */ + setbits_le32(&clkctrl_regs->hw_clkctrl_enet, CLKCTRL_ENET_CLK_OUT_EN); + + return 0; +} +#endif + +U_BOOT_CMD( + clocks, CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks, + "display clocks", + "" +); diff --git a/arch/arm/cpu/arm926ejs/mx28/timer.c b/arch/arm/cpu/arm926ejs/mx28/timer.c new file mode 100644 index 0000000..dbc904d --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mx28/timer.c @@ -0,0 +1,141 @@ +/* + * Freescale i.MX28 timer driver + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * (C) Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> + +/* Maximum fixed count */ +#define TIMER_LOAD_VAL 0xffffffff + +DECLARE_GLOBAL_DATA_PTR; + +#define timestamp (gd->tbl) +#define lastdec (gd->lastinc) + +/* + * This driver uses 1kHz clock source. + */ +#define MX28_INCREMENTER_HZ 1000 + +static inline unsigned long tick_to_time(unsigned long tick) +{ + return tick / (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ); +} + +static inline unsigned long time_to_tick(unsigned long time) +{ + return time * (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ); +} + +/* Calculate how many ticks happen in "us" microseconds */ +static inline unsigned long us_to_tick(unsigned long us) +{ + return (us * MX28_INCREMENTER_HZ) / 1000000; +} + +int timer_init(void) +{ + struct mx28_timrot_regs *timrot_regs = + (struct mx28_timrot_regs *)MXS_TIMROT_BASE; + + /* Reset Timers and Rotary Encoder module */ + mx28_reset_block(&timrot_regs->hw_timrot_rotctrl_reg); + + /* Set fixed_count to 0 */ + writel(0, &timrot_regs->hw_timrot_fixed_count0); + + /* Set UPDATE bit and 1Khz frequency */ + writel(TIMROT_TIMCTRLn_UPDATE | TIMROT_TIMCTRLn_RELOAD | + TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL, + &timrot_regs->hw_timrot_timctrl0); + + /* Set fixed_count to maximal value */ + writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0); + + return 0; +} + +ulong get_timer(ulong base) +{ + struct mx28_timrot_regs *timrot_regs = + (struct mx28_timrot_regs *)MXS_TIMROT_BASE; + + /* Current tick value */ + uint32_t now = readl(&timrot_regs->hw_timrot_running_count0); + + if (lastdec >= now) { + /* + * normal mode (non roll) + * move stamp forward with absolut diff ticks + */ + timestamp += (lastdec - now); + } else { + /* we have rollover of decrementer */ + timestamp += (TIMER_LOAD_VAL - now) + lastdec; + + } + lastdec = now; + + return tick_to_time(timestamp) - base; +} + +/* We use the HW_DIGCTL_MICROSECONDS register for sub-millisecond timer. */ +#define MX28_HW_DIGCTL_MICROSECONDS 0x8001c0c0 + +void __udelay(unsigned long usec) +{ + uint32_t old, new, incr; + uint32_t counter = 0; + + old = readl(MX28_HW_DIGCTL_MICROSECONDS); + + while (counter < usec) { + new = readl(MX28_HW_DIGCTL_MICROSECONDS); + + /* Check if the timer wrapped. */ + if (new < old) { + incr = 0xffffffff - old; + incr += new; + } else { + incr = new - old; + } + + /* + * Check if we are close to the maximum time and the counter + * would wrap if incremented. If that's the case, break out + * from the loop as the requested delay time passed. + */ + if (counter + incr < counter) + break; + + counter += incr; + old = new; + } +} |