diff options
Diffstat (limited to 'arch/arm/cpu/arm926ejs/mx28/mx28.c')
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mx28/mx28.c | 193 |
1 files changed, 193 insertions, 0 deletions
diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c new file mode 100644 index 0000000..446ea8b --- /dev/null +++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c @@ -0,0 +1,193 @@ +/* + * Freescale i.MX28 common code + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * Based on code from LTIB: + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> + +/* 1 second delay should be plenty of time for block reset. */ +#define RESET_MAX_TIMEOUT 1000000 + +#define MX28_BLOCK_SFTRST (1 << 31) +#define MX28_BLOCK_CLKGATE (1 << 30) + +/* Lowlevel init isn't used on i.MX28, so just have a dummy here */ +inline void lowlevel_init(void) {} + +void reset_cpu(ulong ignored) __attribute__((noreturn)); + +void reset_cpu(ulong ignored) +{ + + struct mx28_rtc_regs *rtc_regs = + (struct mx28_rtc_regs *)MXS_RTC_BASE; + + /* Wait 1 uS before doing the actual watchdog reset */ + writel(1, &rtc_regs->hw_rtc_watchdog); + writel(RTC_CTRL_WATCHDOGEN, &rtc_regs->hw_rtc_ctrl_set); + + /* Endless loop, reset will exit from here */ + for (;;) + ; +} + +int mx28_wait_mask_set(struct mx28_register *reg, uint32_t mask, int timeout) +{ + while (--timeout) { + if ((readl(®->reg) & mask) == mask) + break; + udelay(1); + } + + return !timeout; +} + +int mx28_wait_mask_clr(struct mx28_register *reg, uint32_t mask, int timeout) +{ + while (--timeout) { + if ((readl(®->reg) & mask) == 0) + break; + udelay(1); + } + + return !timeout; +} + +int mx28_reset_block(struct mx28_register *reg) +{ + /* Clear SFTRST */ + writel(MX28_BLOCK_SFTRST, ®->reg_clr); + + if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) + return 1; + + /* Clear CLKGATE */ + writel(MX28_BLOCK_CLKGATE, ®->reg_clr); + + /* Set SFTRST */ + writel(MX28_BLOCK_SFTRST, ®->reg_set); + + /* Wait for CLKGATE being set */ + if (mx28_wait_mask_set(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) + return 1; + + /* Clear SFTRST */ + writel(MX28_BLOCK_SFTRST, ®->reg_clr); + + if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) + return 1; + + /* Clear CLKGATE */ + writel(MX28_BLOCK_CLKGATE, ®->reg_clr); + + if (mx28_wait_mask_clr(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) + return 1; + + return 0; +} + +#ifdef CONFIG_ARCH_CPU_INIT +int arch_cpu_init(void) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + /* + * Enable NAND clock + */ + /* Clear bypass bit */ + writel(CLKCTRL_CLKSEQ_BYPASS_GPMI, + &clkctrl_regs->hw_clkctrl_clkseq_set); + + /* Set GPMI clock to ref_gpmi / 12 */ + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_gpmi, + CLKCTRL_GPMI_CLKGATE | CLKCTRL_GPMI_DIV_MASK, 1); + + udelay(1000); + + return 0; +} +#endif + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + printf("Freescale i.MX28 family\n"); + return 0; +} +#endif + +int do_mx28_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + printf("CPU: %3d MHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000); + printf("BUS: %3d MHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000000); + printf("EMI: %3d MHz\n", mxc_get_clock(MXC_EMI_CLK)); + printf("GPMI: %3d MHz\n", mxc_get_clock(MXC_GPMI_CLK) / 1000000); + return 0; +} + +/* + * Initializes on-chip ethernet controllers. + */ +#ifdef CONFIG_CMD_NET +int cpu_eth_init(bd_t *bis) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + + /* Turn on ENET clocks */ + clrbits_le32(&clkctrl_regs->hw_clkctrl_enet, + CLKCTRL_ENET_SLEEP | CLKCTRL_ENET_DISABLE); + + /* Set up ENET PLL for 50 MHz */ + /* Power on ENET PLL */ + writel(CLKCTRL_PLL2CTRL0_POWER, + &clkctrl_regs->hw_clkctrl_pll2ctrl0_set); + + udelay(10); + + /* Gate on ENET PLL */ + writel(CLKCTRL_PLL2CTRL0_CLKGATE, + &clkctrl_regs->hw_clkctrl_pll2ctrl0_clr); + + /* Enable pad output */ + setbits_le32(&clkctrl_regs->hw_clkctrl_enet, CLKCTRL_ENET_CLK_OUT_EN); + + return 0; +} +#endif + +U_BOOT_CMD( + clocks, CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks, + "display clocks", + "" +); |