diff options
Diffstat (limited to 'arch/arm/cpu/arm926ejs/kirkwood')
-rw-r--r-- | arch/arm/cpu/arm926ejs/kirkwood/Kconfig | 88 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/kirkwood/Makefile | 11 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/kirkwood/cache.c | 19 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/kirkwood/cpu.c | 321 | ||||
-rw-r--r-- | arch/arm/cpu/arm926ejs/kirkwood/mpp.c | 90 |
5 files changed, 0 insertions, 529 deletions
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/Kconfig b/arch/arm/cpu/arm926ejs/kirkwood/Kconfig deleted file mode 100644 index 45c6687..0000000 --- a/arch/arm/cpu/arm926ejs/kirkwood/Kconfig +++ /dev/null @@ -1,88 +0,0 @@ -if KIRKWOOD - -choice - prompt "Marvell Kirkwood board select" - -config TARGET_OPENRD - bool "Marvell OpenRD Board" - -config TARGET_MV88F6281GTW_GE - bool "MV88f6281GTW_GE Board" - -config TARGET_RD6281A - bool "RD6281A Board" - -config TARGET_DREAMPLUG - bool "DreamPlug Board" - -config TARGET_GURUPLUG - bool "GuruPlug Board" - -config TARGET_SHEEVAPLUG - bool "SheevaPlug Board" - -config TARGET_LSXL - bool "lsxl Board" - -config TARGET_POGO_E02 - bool "pogo_e02 Board" - -config TARGET_DNS325 - bool "dns325 Board" - -config TARGET_ICONNECT - bool "iconnect Board" - -config TARGET_TK71 - bool "TK71 Board" - -config TARGET_KM_KIRKWOOD - bool "KM_KIRKWOOD Board" - -config TARGET_NET2BIG_V2 - bool "LaCie 2Big Network v2 NAS Board" - -config TARGET_NETSPACE_V2 - bool "LaCie netspace_v2 Board" - -config TARGET_WIRELESS_SPACE - bool "LaCie Wireless_space Board" - -config TARGET_IB62X0 - bool "ib62x0 Board" - -config TARGET_DOCKSTAR - bool "Dockstar Board" - -config TARGET_GOFLEXHOME - bool "GoFlex Home Board" - -config TARGET_NAS220 - bool "BlackArmor NAS220" - -endchoice - -config SYS_SOC - default "kirkwood" - -source "board/Marvell/openrd/Kconfig" -source "board/Marvell/mv88f6281gtw_ge/Kconfig" -source "board/Marvell/rd6281a/Kconfig" -source "board/Marvell/dreamplug/Kconfig" -source "board/Marvell/guruplug/Kconfig" -source "board/Marvell/sheevaplug/Kconfig" -source "board/buffalo/lsxl/Kconfig" -source "board/cloudengines/pogo_e02/Kconfig" -source "board/d-link/dns325/Kconfig" -source "board/iomega/iconnect/Kconfig" -source "board/karo/tk71/Kconfig" -source "board/keymile/km_arm/Kconfig" -source "board/LaCie/net2big_v2/Kconfig" -source "board/LaCie/netspace_v2/Kconfig" -source "board/LaCie/wireless_space/Kconfig" -source "board/raidsonic/ib62x0/Kconfig" -source "board/Seagate/dockstar/Kconfig" -source "board/Seagate/goflexhome/Kconfig" -source "board/Seagate/nas220/Kconfig" - -endif diff --git a/arch/arm/cpu/arm926ejs/kirkwood/Makefile b/arch/arm/cpu/arm926ejs/kirkwood/Makefile deleted file mode 100644 index df4756e..0000000 --- a/arch/arm/cpu/arm926ejs/kirkwood/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = cpu.o -obj-y += cache.o -obj-y += mpp.o diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cache.c b/arch/arm/cpu/arm926ejs/kirkwood/cache.c deleted file mode 100644 index e18a309..0000000 --- a/arch/arm/cpu/arm926ejs/kirkwood/cache.c +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (c) 2012 Michael Walle - * Michael Walle <michael@walle.cc> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <asm/arch/cpu.h> - -#define FEROCEON_EXTRA_FEATURE_L2C_EN (1<<22) - -void l2_cache_disable() -{ - u32 ctrl; - - ctrl = readfr_extra_feature_reg(); - ctrl &= ~FEROCEON_EXTRA_FEATURE_L2C_EN; - writefr_extra_feature_reg(ctrl); -} diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c deleted file mode 100644 index 4c9d3fd..0000000 --- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c +++ /dev/null @@ -1,321 +0,0 @@ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafulla@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> -#include <asm/cache.h> -#include <asm/io.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <mvebu_mmc.h> - -void reset_cpu(unsigned long ignored) -{ - struct kwcpu_registers *cpureg = - (struct kwcpu_registers *)KW_CPU_REG_BASE; - - writel(readl(&cpureg->rstoutn_mask) | (1 << 2), - &cpureg->rstoutn_mask); - writel(readl(&cpureg->sys_soft_rst) | 1, - &cpureg->sys_soft_rst); - while (1) ; -} - -/* - * Window Size - * Used with the Base register to set the address window size and location. - * Must be programmed from LSB to MSB as sequence of ones followed by - * sequence of zeros. The number of ones specifies the size of the window in - * 64 KByte granularity (e.g., a value of 0x00FF specifies 256 = 16 MByte). - * NOTE: A value of 0x0 specifies 64-KByte size. - */ -unsigned int kw_winctrl_calcsize(unsigned int sizeval) -{ - int i; - unsigned int j = 0; - u32 val = sizeval >> 1; - - for (i = 0; val >= 0x10000; i++) { - j |= (1 << i); - val = val >> 1; - } - return (0x0000ffff & j); -} - -/* - * kw_config_adr_windows - Configure address Windows - * - * There are 8 address windows supported by Kirkwood Soc to addess different - * devices. Each window can be configured for size, BAR and remap addr - * Below configuration is standard for most of the cases - * - * If remap function not used, remap_lo must be set as base - * - * Reference Documentation: - * Mbus-L to Mbus Bridge Registers Configuration. - * (Sec 25.1 and 25.3 of Datasheet) - */ -int kw_config_adr_windows(void) -{ - struct kwwin_registers *winregs = - (struct kwwin_registers *)KW_CPU_WIN_BASE; - - /* Window 0: PCIE MEM address space */ - writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 256, KWCPU_TARGET_PCIE, - KWCPU_ATTR_PCIE_MEM, KWCPU_WIN_ENABLE), &winregs[0].ctrl); - - writel(KW_DEFADR_PCI_MEM, &winregs[0].base); - writel(KW_DEFADR_PCI_MEM, &winregs[0].remap_lo); - writel(0x0, &winregs[0].remap_hi); - - /* Window 1: PCIE IO address space */ - writel(KWCPU_WIN_CTRL_DATA(1024 * 64, KWCPU_TARGET_PCIE, - KWCPU_ATTR_PCIE_IO, KWCPU_WIN_ENABLE), &winregs[1].ctrl); - writel(KW_DEFADR_PCI_IO, &winregs[1].base); - writel(KW_DEFADR_PCI_IO_REMAP, &winregs[1].remap_lo); - writel(0x0, &winregs[1].remap_hi); - - /* Window 2: NAND Flash address space */ - writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 128, KWCPU_TARGET_MEMORY, - KWCPU_ATTR_NANDFLASH, KWCPU_WIN_ENABLE), &winregs[2].ctrl); - writel(KW_DEFADR_NANDF, &winregs[2].base); - writel(KW_DEFADR_NANDF, &winregs[2].remap_lo); - writel(0x0, &winregs[2].remap_hi); - - /* Window 3: SPI Flash address space */ - writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 128, KWCPU_TARGET_MEMORY, - KWCPU_ATTR_SPIFLASH, KWCPU_WIN_ENABLE), &winregs[3].ctrl); - writel(KW_DEFADR_SPIF, &winregs[3].base); - writel(KW_DEFADR_SPIF, &winregs[3].remap_lo); - writel(0x0, &winregs[3].remap_hi); - - /* Window 4: BOOT Memory address space */ - writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 128, KWCPU_TARGET_MEMORY, - KWCPU_ATTR_BOOTROM, KWCPU_WIN_ENABLE), &winregs[4].ctrl); - writel(KW_DEFADR_BOOTROM, &winregs[4].base); - - /* Window 5: Security SRAM address space */ - writel(KWCPU_WIN_CTRL_DATA(1024 * 64, KWCPU_TARGET_SASRAM, - KWCPU_ATTR_SASRAM, KWCPU_WIN_ENABLE), &winregs[5].ctrl); - writel(KW_DEFADR_SASRAM, &winregs[5].base); - - /* Window 6-7: Disabled */ - writel(KWCPU_WIN_DISABLE, &winregs[6].ctrl); - writel(KWCPU_WIN_DISABLE, &winregs[7].ctrl); - - return 0; -} - -/* - * SYSRSTn Duration Counter Support - * - * Kirkwood SoC implements a hardware-based SYSRSTn duration counter. - * When SYSRSTn is asserted low, a SYSRSTn duration counter is running. - * The SYSRSTn duration counter is useful for implementing a manufacturer - * or factory reset. Upon a long reset assertion that is greater than a - * pre-configured environment variable value for sysrstdelay, - * The counter value is stored in the SYSRSTn Length Counter Register - * The counter is based on the 25-MHz reference clock (40ns) - * It is a 29-bit counter, yielding a maximum counting duration of - * 2^29/25 MHz (21.4 seconds). When the counter reach its maximum value, - * it remains at this value until counter reset is triggered by setting - * bit 31 of KW_REG_SYSRST_CNT - */ -static void kw_sysrst_action(void) -{ - int ret; - char *s = getenv("sysrstcmd"); - - if (!s) { - debug("Error.. %s failed, check sysrstcmd\n", - __FUNCTION__); - return; - } - - debug("Starting %s process...\n", __FUNCTION__); - ret = run_command(s, 0); - if (ret != 0) - debug("Error.. %s failed\n", __FUNCTION__); - else - debug("%s process finished\n", __FUNCTION__); -} - -static void kw_sysrst_check(void) -{ - u32 sysrst_cnt, sysrst_dly; - char *s; - - /* - * no action if sysrstdelay environment variable is not defined - */ - s = getenv("sysrstdelay"); - if (s == NULL) - return; - - /* read sysrstdelay value */ - sysrst_dly = (u32) simple_strtoul(s, NULL, 10); - - /* read SysRst Length counter register (bits 28:0) */ - sysrst_cnt = (0x1fffffff & readl(KW_REG_SYSRST_CNT)); - debug("H/w Rst hold time: %d.%d secs\n", - sysrst_cnt / SYSRST_CNT_1SEC_VAL, - sysrst_cnt % SYSRST_CNT_1SEC_VAL); - - /* clear the counter for next valid read*/ - writel(1 << 31, KW_REG_SYSRST_CNT); - - /* - * sysrst_action: - * if H/w Reset key is pressed and hold for time - * more than sysrst_dly in seconds - */ - if (sysrst_cnt >= SYSRST_CNT_1SEC_VAL * sysrst_dly) - kw_sysrst_action(); -} - -#if defined(CONFIG_DISPLAY_CPUINFO) -int print_cpuinfo(void) -{ - char *rev = "??"; - u16 devid = (readl(KW_REG_PCIE_DEVID) >> 16) & 0xffff; - u8 revid = readl(KW_REG_PCIE_REVID) & 0xff; - - if ((readl(KW_REG_DEVICE_ID) & 0x03) > 2) { - printf("Error.. %s:Unsupported Kirkwood SoC 88F%04x\n", __FUNCTION__, devid); - return -1; - } - - switch (revid) { - case 0: - if (devid == 0x6281) - rev = "Z0"; - else if (devid == 0x6282) - rev = "A0"; - break; - case 1: - rev = "A1"; - break; - case 2: - rev = "A0"; - break; - case 3: - rev = "A1"; - break; - default: - break; - } - - printf("SoC: Kirkwood 88F%04x_%s\n", devid, rev); - return 0; -} -#endif /* CONFIG_DISPLAY_CPUINFO */ - -#ifdef CONFIG_ARCH_CPU_INIT -int arch_cpu_init(void) -{ - u32 reg; - struct kwcpu_registers *cpureg = - (struct kwcpu_registers *)KW_CPU_REG_BASE; - - /* Linux expects` the internal registers to be at 0xf1000000 */ - writel(KW_REGS_PHY_BASE, KW_OFFSET_REG); - - /* Enable and invalidate L2 cache in write through mode */ - writel(readl(&cpureg->l2_cfg) | 0x18, &cpureg->l2_cfg); - invalidate_l2_cache(); - - kw_config_adr_windows(); - -#ifdef CONFIG_KIRKWOOD_RGMII_PAD_1V8 - /* - * Configures the I/O voltage of the pads connected to Egigabit - * Ethernet interface to 1.8V - * By default it is set to 3.3V - */ - reg = readl(KW_REG_MPP_OUT_DRV_REG); - reg |= (1 << 7); - writel(reg, KW_REG_MPP_OUT_DRV_REG); -#endif -#ifdef CONFIG_KIRKWOOD_EGIGA_INIT - /* - * Set egiga port0/1 in normal functional mode - * This is required becasue on kirkwood by default ports are in reset mode - * OS egiga driver may not have provision to set them in normal mode - * and if u-boot is build without network support, network may fail at OS level - */ - reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(0)); - reg &= ~(1 << 4); /* Clear PortReset Bit */ - writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(0))); - reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(1)); - reg &= ~(1 << 4); /* Clear PortReset Bit */ - writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(1))); -#endif -#ifdef CONFIG_KIRKWOOD_PCIE_INIT - /* - * Enable PCI Express Port0 - */ - reg = readl(&cpureg->ctrl_stat); - reg |= (1 << 0); /* Set PEX0En Bit */ - writel(reg, &cpureg->ctrl_stat); -#endif - return 0; -} -#endif /* CONFIG_ARCH_CPU_INIT */ - -/* - * SOC specific misc init - */ -#if defined(CONFIG_ARCH_MISC_INIT) -int arch_misc_init(void) -{ - volatile u32 temp; - - /*CPU streaming & write allocate */ - temp = readfr_extra_feature_reg(); - temp &= ~(1 << 28); /* disable wr alloc */ - writefr_extra_feature_reg(temp); - - temp = readfr_extra_feature_reg(); - temp &= ~(1 << 29); /* streaming disabled */ - writefr_extra_feature_reg(temp); - - /* L2Cache settings */ - temp = readfr_extra_feature_reg(); - /* Disable L2C pre fetch - Set bit 24 */ - temp |= (1 << 24); - /* enable L2C - Set bit 22 */ - temp |= (1 << 22); - writefr_extra_feature_reg(temp); - - icache_enable(); - /* Change reset vector to address 0x0 */ - temp = get_cr(); - set_cr(temp & ~CR_V); - - /* checks and execute resset to factory event */ - kw_sysrst_check(); - - return 0; -} -#endif /* CONFIG_ARCH_MISC_INIT */ - -#ifdef CONFIG_MVGBE -int cpu_eth_init(bd_t *bis) -{ - mvgbe_initialize(bis); - return 0; -} -#endif - -#ifdef CONFIG_MVEBU_MMC -int board_mmc_init(bd_t *bis) -{ - mvebu_mmc_init(bis); - return 0; -} -#endif /* CONFIG_MVEBU_MMC */ diff --git a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c b/arch/arm/cpu/arm926ejs/kirkwood/mpp.c deleted file mode 100644 index 7222504..0000000 --- a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * arch/arm/mach-kirkwood/mpp.c - * - * MPP functions for Marvell Kirkwood SoCs - * Referenced from Linux kernel source - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> - -static u32 kirkwood_variant(void) -{ - switch (readl(KW_REG_DEVICE_ID) & 0x03) { - case 1: - return MPP_F6192_MASK; - case 2: - return MPP_F6281_MASK; - default: - debug("MPP setup: unknown kirkwood variant\n"); - return 0; - } -} - -#define MPP_CTRL(i) (KW_MPP_BASE + (i* 4)) -#define MPP_NR_REGS (1 + MPP_MAX/8) - -void kirkwood_mpp_conf(const u32 *mpp_list, u32 *mpp_save) -{ - u32 mpp_ctrl[MPP_NR_REGS]; - unsigned int variant_mask; - int i; - - variant_mask = kirkwood_variant(); - if (!variant_mask) - return; - - debug( "initial MPP regs:"); - for (i = 0; i < MPP_NR_REGS; i++) { - mpp_ctrl[i] = readl(MPP_CTRL(i)); - debug(" %08x", mpp_ctrl[i]); - } - debug("\n"); - - - while (*mpp_list) { - unsigned int num = MPP_NUM(*mpp_list); - unsigned int sel = MPP_SEL(*mpp_list); - unsigned int sel_save; - int shift; - - if (num > MPP_MAX) { - debug("kirkwood_mpp_conf: invalid MPP " - "number (%u)\n", num); - continue; - } - if (!(*mpp_list & variant_mask)) { - debug("kirkwood_mpp_conf: requested MPP%u config " - "unavailable on this hardware\n", num); - continue; - } - - shift = (num & 7) << 2; - - if (mpp_save) { - sel_save = (mpp_ctrl[num / 8] >> shift) & 0xf; - *mpp_save = num | (sel_save << 8) | variant_mask; - mpp_save++; - } - - mpp_ctrl[num / 8] &= ~(0xf << shift); - mpp_ctrl[num / 8] |= sel << shift; - - mpp_list++; - } - - debug(" final MPP regs:"); - for (i = 0; i < MPP_NR_REGS; i++) { - writel(mpp_ctrl[i], MPP_CTRL(i)); - debug(" %08x", mpp_ctrl[i]); - } - debug("\n"); - -} |