diff options
Diffstat (limited to 'arch/arm/cpu/arm926ejs/at91/timer.c')
-rw-r--r-- | arch/arm/cpu/arm926ejs/at91/timer.c | 120 |
1 files changed, 0 insertions, 120 deletions
diff --git a/arch/arm/cpu/arm926ejs/at91/timer.c b/arch/arm/cpu/arm926ejs/at91/timer.c deleted file mode 100644 index b0b7fb9..0000000 --- a/arch/arm/cpu/arm926ejs/at91/timer.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop <stelian@popies.net> - * Lead Tech Design <www.leadtechdesign.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pit.h> -#include <asm/arch/at91_pmc.h> -#include <asm/arch/clk.h> -#include <div64.h> - -#if !defined(CONFIG_AT91FAMILY) -# error You need to define CONFIG_AT91FAMILY in your board config! -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by - * setting the 20 bit counter period to its maximum (0xfffff). - * (See the relevant data sheets to understand that this really works) - * - * We do also mimic the typical powerpc way of incrementing - * two 32 bit registers called tbl and tbu. - * - * Those registers increment at 1/16 the main clock rate. - */ - -#define TIMER_LOAD_VAL 0xfffff - -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - tick *= CONFIG_SYS_HZ; - do_div(tick, gd->arch.timer_rate_hz); - - return tick; -} - -static inline unsigned long long usec_to_tick(unsigned long long usec) -{ - usec *= gd->arch.timer_rate_hz; - do_div(usec, 1000000); - - return usec; -} - -/* - * Use the PITC in full 32 bit incrementing mode - */ -int timer_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT; - - /* Enable PITC Clock */ - writel(1 << ATMEL_ID_SYS, &pmc->pcer); - - /* Enable PITC */ - writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr); - - gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16; - gd->arch.tbu = gd->arch.tbl = 0; - - return 0; -} - -/* - * Get the current 64 bit timer tick count - */ -unsigned long long get_ticks(void) -{ - at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT; - - ulong now = readl(&pit->piir); - - /* increment tbu if tbl has rolled over */ - if (now < gd->arch.tbl) - gd->arch.tbu++; - gd->arch.tbl = now; - return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; -} - -void __udelay(unsigned long usec) -{ - unsigned long long start; - ulong tmo; - - start = get_ticks(); /* get current timestamp */ - tmo = usec_to_tick(usec); /* convert usecs to ticks */ - while ((get_ticks() - start) < tmo) - ; /* loop till time has passed */ -} - -/* - * get_timer(base) can be used to check for timeouts or - * to measure elasped time relative to an event: - * - * ulong start_time = get_timer(0) sets start_time to the current - * time value. - * get_timer(start_time) returns the time elapsed since then. - * - * The time is used in CONFIG_SYS_HZ units! - */ -ulong get_timer(ulong base) -{ - return tick_to_time(get_ticks()) - base; -} - -/* - * Return the number of timer ticks per second. - */ -ulong get_tbclk(void) -{ - return gd->arch.timer_rate_hz; -} |