diff options
Diffstat (limited to 'arch/arm/cpu/arm720t/tegra-common/cpu.c')
| -rw-r--r-- | arch/arm/cpu/arm720t/tegra-common/cpu.c | 333 |
1 files changed, 333 insertions, 0 deletions
diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.c b/arch/arm/cpu/arm720t/tegra-common/cpu.c new file mode 100644 index 0000000..119342e --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra-common/cpu.c @@ -0,0 +1,333 @@ +/* + * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gp_padctrl.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/tegra.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/pmc.h> +#include <asm/arch-tegra/scu.h> +#include "cpu.h" + +int get_num_cpus(void) +{ + struct apb_misc_gp_ctlr *gp; + uint rev; + + gp = (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE; + rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT; + + switch (rev) { + case CHIPID_TEGRA20: + return 2; + break; + case CHIPID_TEGRA30: + case CHIPID_TEGRA114: + default: + return 4; + break; + } +} + +/* + * Timing tables for each SOC for all four oscillator options. + */ +struct clk_pll_table tegra_pll_x_table[TEGRA_SOC_CNT][CLOCK_OSC_FREQ_COUNT] = { + /* T20: 1 GHz */ + /* n, m, p, cpcon */ + {{ 1000, 13, 0, 12}, /* OSC 13M */ + { 625, 12, 0, 8}, /* OSC 19.2M */ + { 1000, 12, 0, 12}, /* OSC 12M */ + { 1000, 26, 0, 12}, /* OSC 26M */ + }, + + /* T25: 1.2 GHz */ + {{ 923, 10, 0, 12}, + { 750, 12, 0, 8}, + { 600, 6, 0, 12}, + { 600, 13, 0, 12}, + }, + + /* T30: 1.4 GHz */ + {{ 862, 8, 0, 8}, + { 583, 8, 0, 4}, + { 700, 6, 0, 8}, + { 700, 13, 0, 8}, + }, + + /* T114: 1.4 GHz */ + {{ 862, 8, 0, 8}, + { 583, 8, 0, 4}, + { 696, 12, 0, 8}, + { 700, 13, 0, 8}, + }, +}; + +void adjust_pllp_out_freqs(void) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + struct clk_pll *pll = &clkrst->crc_pll[CLOCK_ID_PERIPH]; + u32 reg; + + /* Set T30 PLLP_OUT1, 2, 3 & 4 freqs to 9.6, 48, 102 & 204MHz */ + reg = readl(&pll->pll_out[0]); /* OUTA, contains OUT2 / OUT1 */ + reg |= (IN_408_OUT_48_DIVISOR << PLLP_OUT2_RATIO) | PLLP_OUT2_OVR + | (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO) | PLLP_OUT1_OVR; + writel(reg, &pll->pll_out[0]); + + reg = readl(&pll->pll_out[1]); /* OUTB, contains OUT4 / OUT3 */ + reg |= (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO) | PLLP_OUT4_OVR + | (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO) | PLLP_OUT3_OVR; + writel(reg, &pll->pll_out[1]); +} + +int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm, + u32 divp, u32 cpcon) +{ + u32 reg; + + /* If PLLX is already enabled, just return */ + if (readl(&pll->pll_base) & PLL_ENABLE_MASK) { + debug("pllx_set_rate: PLLX already enabled, returning\n"); + return 0; + } + + debug(" pllx_set_rate entry\n"); + + /* Set BYPASS, m, n and p to PLLX_BASE */ + reg = PLL_BYPASS_MASK | (divm << PLL_DIVM_SHIFT); + reg |= ((divn << PLL_DIVN_SHIFT) | (divp << PLL_DIVP_SHIFT)); + writel(reg, &pll->pll_base); + + /* Set cpcon to PLLX_MISC */ + reg = (cpcon << PLL_CPCON_SHIFT); + + /* Set dccon to PLLX_MISC if freq > 600MHz */ + if (divn > 600) + reg |= (1 << PLL_DCCON_SHIFT); + writel(reg, &pll->pll_misc); + + /* Enable PLLX */ + reg = readl(&pll->pll_base); + reg |= PLL_ENABLE_MASK; + + /* Disable BYPASS */ + reg &= ~PLL_BYPASS_MASK; + writel(reg, &pll->pll_base); + + /* Set lock_enable to PLLX_MISC */ + reg = readl(&pll->pll_misc); + reg |= PLL_LOCK_ENABLE_MASK; + writel(reg, &pll->pll_misc); + + return 0; +} + +void init_pllx(void) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + struct clk_pll_simple *pll = &clkrst->crc_pll_simple[SIMPLE_PLLX]; + int chip_type; + enum clock_osc_freq osc; + struct clk_pll_table *sel; + + debug("init_pllx entry\n"); + + /* get chip type */ + chip_type = tegra_get_chip_type(); + debug(" init_pllx: chip_type = %d\n", chip_type); + + /* get osc freq */ + osc = clock_get_osc_freq(); + debug(" init_pllx: osc = %d\n", osc); + + /* set pllx */ + sel = &tegra_pll_x_table[chip_type][osc]; + pllx_set_rate(pll, sel->n, sel->m, sel->p, sel->cpcon); + + /* adjust PLLP_out1-4 on T30/T114 */ + if (chip_type == TEGRA_SOC_T30 || chip_type == TEGRA_SOC_T114) { + debug(" init_pllx: adjusting PLLP out freqs\n"); + adjust_pllp_out_freqs(); + } +} + +void enable_cpu_clock(int enable) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 clk; + + /* + * NOTE: + * Regardless of whether the request is to enable or disable the CPU + * clock, every processor in the CPU complex except the master (CPU 0) + * will have it's clock stopped because the AVP only talks to the + * master. + */ + + if (enable) { + /* Initialize PLLX */ + init_pllx(); + + /* Wait until all clocks are stable */ + udelay(PLL_STABILIZATION_DELAY); + + writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol); + writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div); + } + + /* + * Read the register containing the individual CPU clock enables and + * always stop the clocks to CPUs > 0. + */ + clk = readl(&clkrst->crc_clk_cpu_cmplx); + clk |= 1 << CPU1_CLK_STP_SHIFT; + if (get_num_cpus() == 4) + clk |= (1 << CPU2_CLK_STP_SHIFT) + (1 << CPU3_CLK_STP_SHIFT); + + /* Stop/Unstop the CPU clock */ + clk &= ~CPU0_CLK_STP_MASK; + clk |= !enable << CPU0_CLK_STP_SHIFT; + writel(clk, &clkrst->crc_clk_cpu_cmplx); + + clock_enable(PERIPH_ID_CPU); +} + +static int is_cpu_powered(void) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + + return (readl(&pmc->pmc_pwrgate_status) & CPU_PWRED) ? 1 : 0; +} + +static void remove_cpu_io_clamps(void) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + u32 reg; + + /* Remove the clamps on the CPU I/O signals */ + reg = readl(&pmc->pmc_remove_clamping); + reg |= CPU_CLMP; + writel(reg, &pmc->pmc_remove_clamping); + + /* Give I/O signals time to stabilize */ + udelay(IO_STABILIZATION_DELAY); +} + +void powerup_cpu(void) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + u32 reg; + int timeout = IO_STABILIZATION_DELAY; + + if (!is_cpu_powered()) { + /* Toggle the CPU power state (OFF -> ON) */ + reg = readl(&pmc->pmc_pwrgate_toggle); + reg &= PARTID_CP; + reg |= START_CP; + writel(reg, &pmc->pmc_pwrgate_toggle); + + /* Wait for the power to come up */ + while (!is_cpu_powered()) { + if (timeout-- == 0) + printf("CPU failed to power up!\n"); + else + udelay(10); + } + + /* + * Remove the I/O clamps from CPU power partition. + * Recommended only on a Warm boot, if the CPU partition gets + * power gated. Shouldn't cause any harm when called after a + * cold boot according to HW, probably just redundant. + */ + remove_cpu_io_clamps(); + } +} + +void reset_A9_cpu(int reset) +{ + /* + * NOTE: Regardless of whether the request is to hold the CPU in reset + * or take it out of reset, every processor in the CPU complex + * except the master (CPU 0) will be held in reset because the + * AVP only talks to the master. The AVP does not know that there + * are multiple processors in the CPU complex. + */ + int mask = crc_rst_cpu | crc_rst_de | crc_rst_debug; + int num_cpus = get_num_cpus(); + int cpu; + + debug("reset_a9_cpu entry\n"); + /* Hold CPUs 1 onwards in reset, and CPU 0 if asked */ + for (cpu = 1; cpu < num_cpus; cpu++) + reset_cmplx_set_enable(cpu, mask, 1); + reset_cmplx_set_enable(0, mask, reset); + + /* Enable/Disable master CPU reset */ + reset_set_enable(PERIPH_ID_CPU, reset); +} + +void clock_enable_coresight(int enable) +{ + u32 rst, src = 2; + int chip; + + debug("clock_enable_coresight entry\n"); + clock_set_enable(PERIPH_ID_CORESIGHT, enable); + reset_set_enable(PERIPH_ID_CORESIGHT, !enable); + + if (enable) { + /* + * Put CoreSight on PLLP_OUT0 (216 MHz) and divide it down by + * 1.5, giving an effective frequency of 144MHz. + * Set PLLP_OUT0 [bits31:30 = 00], and use a 7.1 divisor + * (bits 7:0), so 00000001b == 1.5 (n+1 + .5) + * + * Clock divider request for 204MHz would setup CSITE clock as + * 144MHz for PLLP base 216MHz and 204MHz for PLLP base 408MHz + */ + chip = tegra_get_chip_type(); + if (chip == TEGRA_SOC_T30 || chip == TEGRA_SOC_T114) + src = CLK_DIVIDER(NVBL_PLLP_KHZ, 204000); + else if (chip == TEGRA_SOC_T20 || chip == TEGRA_SOC_T25) + src = CLK_DIVIDER(NVBL_PLLP_KHZ, 144000); + else + printf("%s: Unknown chip type %X!\n", __func__, chip); + clock_ll_set_source_divisor(PERIPH_ID_CSI, 0, src); + + /* Unlock the CPU CoreSight interfaces */ + rst = CORESIGHT_UNLOCK; + writel(rst, CSITE_CPU_DBG0_LAR); + writel(rst, CSITE_CPU_DBG1_LAR); + if (get_num_cpus() == 4) { + writel(rst, CSITE_CPU_DBG2_LAR); + writel(rst, CSITE_CPU_DBG3_LAR); + } + } +} + +void halt_avp(void) +{ + for (;;) { + writel((HALT_COP_EVENT_JTAG | HALT_COP_EVENT_IRQ_1 \ + | HALT_COP_EVENT_FIQ_1 | (FLOW_MODE_STOP<<29)), + FLOW_CTLR_HALT_COP_EVENTS); + } +} |