summaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
Diffstat (limited to 'README')
-rw-r--r--README38
1 files changed, 38 insertions, 0 deletions
diff --git a/README b/README
index 18b720c..5d059e7 100644
--- a/README
+++ b/README
@@ -738,6 +738,9 @@ The following options need to be configured:
CONFIG_E1000
Support for Intel 8254x gigabit chips.
+ CONFIG_E1000_FALLBACK_MAC
+ default MAC for empty eeprom after production.
+
CONFIG_EEPRO100
Support for Intel 82557/82559/82559ER chips.
Optional CONFIG_EEPRO100_SROM_WRITE enables eeprom
@@ -1138,6 +1141,20 @@ The following options need to be configured:
of the "hostname" environment variable is passed as
option 12 to the DHCP server.
+ CONFIG_BOOTP_DHCP_REQUEST_DELAY
+
+ A 32bit value in microseconds for a delay between
+ receiving a "DHCP Offer" and sending the "DHCP Request".
+ This fixes a problem with certain DHCP servers that don't
+ respond 100% of the time to a "DHCP request". E.g. On an
+ AT91RM9200 processor running at 180MHz, this delay needed
+ to be *at least* 15,000 usec before a Windows Server 2003
+ DHCP server would reply 100% of the time. I recommend at
+ least 50,000 usec to be safe. The alternative is to hope
+ that one of the retries will be successful but note that
+ the DHCP timeout and retry process takes a longer than
+ this delay.
+
- CDP Options:
CONFIG_CDP_DEVICE_ID
@@ -1916,6 +1933,27 @@ Configuration Settings:
Scratch address used by the alternate memory test
You only need to set this if address zero isn't writeable
+- CFG_MEM_TOP_HIDE (PPC only):
+ If CFG_MEM_TOP_HIDE is defined in the board config header,
+ this specified memory area will get subtracted from the top
+ (end) of ram and won't get "touched" at all by U-Boot. By
+ fixing up gd->ram_size the Linux kernel should gets passed
+ the now "corrected" memory size and won't touch it either.
+ This should work for arch/ppc and arch/powerpc. Only Linux
+ board ports in arch/powerpc with bootwrapper support that
+ recalculate the memory size from the SDRAM controller setup
+ will have to get fixed in Linux additionally.
+
+ This option can be used as a workaround for the 440EPx/GRx
+ CHIP 11 errata where the last 256 bytes in SDRAM shouldn't
+ be touched.
+
+ WARNING: Please make sure that this value is a multiple of
+ the Linux page size (normally 4k). If this is not the case,
+ then the end address of the Linux memory will be located at a
+ non page size aligned address and this could cause major
+ problems.
+
- CFG_TFTP_LOADADDR:
Default load address for network file downloads