diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 21 |
1 files changed, 21 insertions, 0 deletions
@@ -1946,6 +1946,27 @@ Configuration Settings: Scratch address used by the alternate memory test You only need to set this if address zero isn't writeable +- CFG_MEM_TOP_HIDE (PPC only): + If CFG_MEM_TOP_HIDE is defined in the board config header, + this specified memory area will get subtracted from the top + (end) of ram and won't get "touched" at all by U-Boot. By + fixing up gd->ram_size the Linux kernel should gets passed + the now "corrected" memory size and won't touch it either. + This should work for arch/ppc and arch/powerpc. Only Linux + board ports in arch/powerpc with bootwrapper support that + recalculate the memory size from the SDRAM controller setup + will have to get fixed in Linux additionally. + + This option can be used as a workaround for the 440EPx/GRx + CHIP 11 errata where the last 256 bytes in SDRAM shouldn't + be touched. + + WARNING: Please make sure that this value is a multiple of + the Linux page size (normally 4k). If this is not the case, + then the end address of the Linux memory will be located at a + non page size aligned address and this could cause major + problems. + - CFG_TFTP_LOADADDR: Default load address for network file downloads |