diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 428 |
1 files changed, 190 insertions, 238 deletions
@@ -136,6 +136,8 @@ Directory Hierarchy: - i386 Files specific to i386 CPUs - ixp Files specific to Intel XScale IXP CPUs - mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs + - mcf532x Files specific to Freescale ColdFire MCF5329 CPUs + - mcf5445x Files specific to Freescale ColdFire MCF5445x CPUs - mips Files specific to MIPS CPUs - mpc5xx Files specific to Freescale MPC5xx CPUs - mpc5xxx Files specific to Freescale MPC5xxx CPUs @@ -228,113 +230,9 @@ build a config tool - later. The following options need to be configured: -- CPU Type: Define exactly one of - - PowerPC based CPUs: - ------------------- - CONFIG_MPC823, CONFIG_MPC850, CONFIG_MPC855, CONFIG_MPC860 - or CONFIG_MPC5xx - or CONFIG_MPC8220 - or CONFIG_MPC824X, CONFIG_MPC8260 - or CONFIG_MPC85xx - or CONFIG_IOP480 - or CONFIG_405GP - or CONFIG_405EP - or CONFIG_440 - or CONFIG_MPC74xx - or CONFIG_750FX - - ARM based CPUs: - --------------- - CONFIG_SA1110 - CONFIG_ARM7 - CONFIG_PXA250 - CONFIG_CPU_MONAHANS - - MicroBlaze based CPUs: - ---------------------- - CONFIG_MICROBLAZE - - Nios-2 based CPUs: - ---------------------- - CONFIG_NIOS2 - - AVR32 based CPUs: - ---------------------- - CONFIG_AT32AP - -- Board Type: Define exactly one of - - PowerPC based boards: - --------------------- - - CONFIG_ADCIOP CONFIG_FPS860L CONFIG_OXC - CONFIG_ADS860 CONFIG_GEN860T CONFIG_PCI405 - CONFIG_AMX860 CONFIG_GENIETV CONFIG_PCIPPC2 - CONFIG_AP1000 CONFIG_GTH CONFIG_PCIPPC6 - CONFIG_AR405 CONFIG_gw8260 CONFIG_pcu_e - CONFIG_BAB7xx CONFIG_hermes CONFIG_PIP405 - CONFIG_BC3450 CONFIG_hymod CONFIG_PM826 - CONFIG_c2mon CONFIG_IAD210 CONFIG_ppmc8260 - CONFIG_CANBT CONFIG_ICU862 CONFIG_QS823 - CONFIG_CCM CONFIG_IP860 CONFIG_QS850 - CONFIG_CMI CONFIG_IPHASE4539 CONFIG_QS860T - CONFIG_cogent_mpc8260 CONFIG_IVML24 CONFIG_RBC823 - CONFIG_cogent_mpc8xx CONFIG_IVML24_128 CONFIG_RPXClassic - CONFIG_CPCI405 CONFIG_IVML24_256 CONFIG_RPXlite - CONFIG_CPCI4052 CONFIG_IVMS8 CONFIG_RPXsuper - CONFIG_CPCIISER4 CONFIG_IVMS8_128 CONFIG_rsdproto - CONFIG_CPU86 CONFIG_IVMS8_256 CONFIG_sacsng - CONFIG_CRAYL1 CONFIG_JSE CONFIG_Sandpoint8240 - CONFIG_CSB272 CONFIG_LANTEC CONFIG_Sandpoint8245 - CONFIG_CU824 CONFIG_LITE5200B CONFIG_sbc8260 - CONFIG_DASA_SIM CONFIG_lwmon CONFIG_sbc8560 - CONFIG_DB64360 CONFIG_MBX CONFIG_SM850 - CONFIG_DB64460 CONFIG_MBX860T CONFIG_SPD823TS - CONFIG_DU405 CONFIG_MHPC CONFIG_STXGP3 - CONFIG_DUET_ADS CONFIG_MIP405 CONFIG_SXNI855T - CONFIG_EBONY CONFIG_MOUSSE CONFIG_TQM823L - CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM8260 - CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM850L - CONFIG_ep8260 CONFIG_MPC8540EVAL CONFIG_TQM855L - CONFIG_ERIC CONFIG_MPC8560ADS CONFIG_TQM860L - CONFIG_ESTEEM192E CONFIG_MUSENKI CONFIG_TTTech - CONFIG_ETX094 CONFIG_MVS1 CONFIG_UTX8245 - CONFIG_EVB64260 CONFIG_NETPHONE CONFIG_V37 - CONFIG_FADS823 CONFIG_NETTA CONFIG_W7OLMC - CONFIG_FADS850SAR CONFIG_NETVIA CONFIG_W7OLMG - CONFIG_FADS860T CONFIG_NX823 CONFIG_WALNUT - CONFIG_FLAGADM CONFIG_OCRTC CONFIG_ZPC1900 - CONFIG_FPS850L CONFIG_ORSG CONFIG_ZUMA - - ARM based boards: - ----------------- - - CONFIG_ARMADILLO, CONFIG_AT91RM9200DK, CONFIG_CERF250, - CONFIG_CSB637, CONFIG_DELTA, CONFIG_DNP1110, - CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, - CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, - CONFIG_KB9202, CONFIG_LART, CONFIG_LPD7A400, - CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, - CONFIG_PLEB2, CONFIG_SHANNON, CONFIG_P2_OMAP730, - CONFIG_SMDK2400, CONFIG_SMDK2410, CONFIG_TRAB, - CONFIG_VCMA9 - - MicroBlaze based boards: - ------------------------ - - CONFIG_SUZAKU - - Nios-2 based boards: - ------------------------ - - CONFIG_PCI5441 CONFIG_PK1C20 - CONFIG_EP1C20 CONFIG_EP1S10 CONFIG_EP1S40 - - AVR32 based boards: - ------------------- - - CONFIG_ATSTK1000 +- CPU Type: Define exactly one, e.g. CONFIG_MPC85XX. + +- Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS. - CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined) Define exactly one of @@ -541,7 +439,7 @@ The following options need to be configured: CFG_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c) CONFIG_CONSOLE_TIME display time/date info in upper right corner - (requires CFG_CMD_DATE) + (requires CONFIG_CMD_DATE) CONFIG_VIDEO_LOGO display Linux logo in upper left corner CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of @@ -645,103 +543,96 @@ The following options need to be configured: time on others. This setting #define's the initial value of the "loads_echo" environment variable. -- Kgdb Serial Baudrate: (if CFG_CMD_KGDB is defined) +- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined) CONFIG_KGDB_BAUDRATE Select one of the baudrates listed in CFG_BAUDRATE_TABLE, see below. - Monitor Functions: - CONFIG_COMMANDS - Most monitor functions can be selected (or - de-selected) by adjusting the definition of - CONFIG_COMMANDS; to select individual functions, - #define CONFIG_COMMANDS by "OR"ing any of the - following values: - - #define enables commands: - ------------------------- - CFG_CMD_ASKENV * ask for env variable - CFG_CMD_AUTOSCRIPT Autoscript Support - CFG_CMD_BDI bdinfo - CFG_CMD_BEDBUG * Include BedBug Debugger - CFG_CMD_BMP * BMP support - CFG_CMD_BSP * Board specific commands - CFG_CMD_BOOTD bootd - CFG_CMD_CACHE * icache, dcache - CFG_CMD_CONSOLE coninfo - CFG_CMD_DATE * support for RTC, date/time... - CFG_CMD_DHCP * DHCP support - CFG_CMD_DIAG * Diagnostics - CFG_CMD_DOC * Disk-On-Chip Support - CFG_CMD_DTT * Digital Therm and Thermostat - CFG_CMD_ECHO echo arguments - CFG_CMD_EEPROM * EEPROM read/write support - CFG_CMD_ELF * bootelf, bootvx - CFG_CMD_ENV saveenv - CFG_CMD_FDC * Floppy Disk Support - CFG_CMD_FAT * FAT partition support - CFG_CMD_FDOS * Dos diskette Support - CFG_CMD_FLASH flinfo, erase, protect - CFG_CMD_FPGA FPGA device initialization support - CFG_CMD_HWFLOW * RTS/CTS hw flow control - CFG_CMD_I2C * I2C serial bus support - CFG_CMD_IDE * IDE harddisk support - CFG_CMD_IMI iminfo - CFG_CMD_IMLS List all found images - CFG_CMD_IMMAP * IMMR dump support - CFG_CMD_IRQ * irqinfo - CFG_CMD_ITEST Integer/string test of 2 values - CFG_CMD_JFFS2 * JFFS2 Support - CFG_CMD_KGDB * kgdb - CFG_CMD_LOADB loadb - CFG_CMD_LOADS loads - CFG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, - loop, loopw, mtest - CFG_CMD_MISC Misc functions like sleep etc - CFG_CMD_MMC * MMC memory mapped support - CFG_CMD_MII * MII utility commands - CFG_CMD_NAND * NAND support - CFG_CMD_NET bootp, tftpboot, rarpboot - CFG_CMD_PCI * pciinfo - CFG_CMD_PCMCIA * PCMCIA support - CFG_CMD_PING * send ICMP ECHO_REQUEST to network host - CFG_CMD_PORTIO * Port I/O - CFG_CMD_REGINFO * Register dump - CFG_CMD_RUN run command in env variable - CFG_CMD_SAVES * save S record dump - CFG_CMD_SCSI * SCSI Support - CFG_CMD_SDRAM * print SDRAM configuration information - (requires CFG_CMD_I2C) - CFG_CMD_SETGETDCR Support for DCR Register access (4xx only) - CFG_CMD_SPI * SPI serial bus support - CFG_CMD_USB * USB support - CFG_CMD_VFD * VFD support (TRAB) - CFG_CMD_BSP * Board SPecific functions - CFG_CMD_CDP * Cisco Discover Protocol support - CFG_CMD_FSL * Microblaze FSL support - ----------------------------------------------- - CFG_CMD_ALL all - - CONFIG_CMD_DFL Default configuration; at the moment - this is includes all commands, except - the ones marked with "*" in the list - above. - - If you don't define CONFIG_COMMANDS it defaults to - CONFIG_CMD_DFL in include/cmd_confdefs.h. A board can - override the default settings in the respective - include file. + Monitor commands can be included or excluded + from the build by using the #include files + "config_cmd_all.h" and #undef'ing unwanted + commands, or using "config_cmd_default.h" + and augmenting with additional #define's + for wanted commands. + + The default command configuration includes all commands + except those marked below with a "*". + + CONFIG_CMD_ASKENV * ask for env variable + CONFIG_CMD_AUTOSCRIPT Autoscript Support + CONFIG_CMD_BDI bdinfo + CONFIG_CMD_BEDBUG * Include BedBug Debugger + CONFIG_CMD_BMP * BMP support + CONFIG_CMD_BSP * Board specific commands + CONFIG_CMD_BOOTD bootd + CONFIG_CMD_CACHE * icache, dcache + CONFIG_CMD_CONSOLE coninfo + CONFIG_CMD_DATE * support for RTC, date/time... + CONFIG_CMD_DHCP * DHCP support + CONFIG_CMD_DIAG * Diagnostics + CONFIG_CMD_DOC * Disk-On-Chip Support + CONFIG_CMD_DTT * Digital Therm and Thermostat + CONFIG_CMD_ECHO echo arguments + CONFIG_CMD_EEPROM * EEPROM read/write support + CONFIG_CMD_ELF * bootelf, bootvx + CONFIG_CMD_ENV saveenv + CONFIG_CMD_FDC * Floppy Disk Support + CONFIG_CMD_FAT * FAT partition support + CONFIG_CMD_FDOS * Dos diskette Support + CONFIG_CMD_FLASH flinfo, erase, protect + CONFIG_CMD_FPGA FPGA device initialization support + CONFIG_CMD_HWFLOW * RTS/CTS hw flow control + CONFIG_CMD_I2C * I2C serial bus support + CONFIG_CMD_IDE * IDE harddisk support + CONFIG_CMD_IMI iminfo + CONFIG_CMD_IMLS List all found images + CONFIG_CMD_IMMAP * IMMR dump support + CONFIG_CMD_IRQ * irqinfo + CONFIG_CMD_ITEST Integer/string test of 2 values + CONFIG_CMD_JFFS2 * JFFS2 Support + CONFIG_CMD_KGDB * kgdb + CONFIG_CMD_LOADB loadb + CONFIG_CMD_LOADS loads + CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, + loop, loopw, mtest + CONFIG_CMD_MISC Misc functions like sleep etc + CONFIG_CMD_MMC * MMC memory mapped support + CONFIG_CMD_MII * MII utility commands + CONFIG_CMD_NAND * NAND support + CONFIG_CMD_NET bootp, tftpboot, rarpboot + CONFIG_CMD_PCI * pciinfo + CONFIG_CMD_PCMCIA * PCMCIA support + CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network + host + CONFIG_CMD_PORTIO * Port I/O + CONFIG_CMD_REGINFO * Register dump + CONFIG_CMD_RUN run command in env variable + CONFIG_CMD_SAVES * save S record dump + CONFIG_CMD_SCSI * SCSI Support + CONFIG_CMD_SDRAM * print SDRAM configuration information + (requires CONFIG_CMD_I2C) + CONFIG_CMD_SETGETDCR Support for DCR Register access + (4xx only) + CONFIG_CMD_SPI * SPI serial bus support + CONFIG_CMD_USB * USB support + CONFIG_CMD_VFD * VFD support (TRAB) + CONFIG_CMD_BSP * Board SPecific functions + CONFIG_CMD_CDP * Cisco Discover Protocol support + CONFIG_CMD_FSL * Microblaze FSL support + EXAMPLE: If you want all functions except of network support you can write: - #define CONFIG_COMMANDS (CFG_CMD_ALL & ~CFG_CMD_NET) + #include "config_cmd_all.h" + #undef CONFIG_CMD_NET Other Commands: fdt (flattened device tree) command: CONFIG_OF_LIBFDT Note: Don't enable the "icache" and "dcache" commands - (configuration option CFG_CMD_CACHE) unless you know + (configuration option CONFIG_CMD_CACHE) unless you know what you (and your U-Boot users) are doing. Data cache cannot be enabled on systems like the 8xx or 8260 (where accesses to the IMMR region must be @@ -769,7 +660,7 @@ The following options need to be configured: - Real-Time Clock: - When CFG_CMD_DATE is selected, the type of the RTC + When CONFIG_CMD_DATE is selected, the type of the RTC has to be selected, too. Define exactly one of the following options: @@ -790,14 +681,14 @@ The following options need to be configured: When CONFIG_TIMESTAMP is selected, the timestamp (date and time) of an image is printed by image commands like bootm or iminfo. This option is - automatically enabled when you select CFG_CMD_DATE . + automatically enabled when you select CONFIG_CMD_DATE . - Partition Support: CONFIG_MAC_PARTITION and/or CONFIG_DOS_PARTITION and/or CONFIG_ISO_PARTITION - If IDE or SCSI support is enabled (CFG_CMD_IDE or - CFG_CMD_SCSI) you must configure support for at least + If IDE or SCSI support is enabled (CONFIG_CMD_IDE or + CONFIG_CMD_SCSI) you must configure support for at least one partition type as well. - IDE Reset method: @@ -900,6 +791,71 @@ The following options need to be configured: CONFIG_USB_CONFIG for differential drivers: 0x00001000 for single ended drivers: 0x00005000 + CFG_USB_EVENT_POLL + May be defined to allow interrupt polling + instead of using asynchronous interrupts + +- USB Device: + Define the below if you wish to use the USB console. + Once firmware is rebuilt from a serial console issue the + command "setenv stdin usbtty; setenv stdout usbtty" and + attach your usb cable. The Unix command "dmesg" should print + it has found a new device. The environment variable usbtty + can be set to gserial or cdc_acm to enable your device to + appear to a USB host as a Linux gserial device or a + Common Device Class Abstract Control Model serial device. + If you select usbtty = gserial you should be able to enumerate + a Linux host by + # modprobe usbserial vendor=0xVendorID product=0xProductID + else if using cdc_acm, simply setting the environment + variable usbtty to be cdc_acm should suffice. The following + might be defined in YourBoardName.h + + CONFIG_USB_DEVICE + Define this to build a UDC device + + CONFIG_USB_TTY + Define this to have a tty type of device available to + talk to the UDC device + + CFG_CONSOLE_IS_IN_ENV + Define this if you want stdin, stdout &/or stderr to + be set to usbtty. + + mpc8xx: + CFG_USB_EXTC_CLK 0xBLAH + Derive USB clock from external clock "blah" + - CFG_USB_EXTC_CLK 0x02 + + CFG_USB_BRG_CLK 0xBLAH + Derive USB clock from brgclk + - CFG_USB_BRG_CLK 0x04 + + If you have a USB-IF assigned VendorID then you may wish to + define your own vendor specific values either in BoardName.h + or directly in usbd_vendor_info.h. If you don't define + CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME, + CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot + should pretend to be a Linux device to it's target host. + + CONFIG_USBD_MANUFACTURER + Define this string as the name of your company for + - CONFIG_USBD_MANUFACTURER "my company" + + CONFIG_USBD_PRODUCT_NAME + Define this string as the name of your product + - CONFIG_USBD_PRODUCT_NAME "acme usb device" + + CONFIG_USBD_VENDORID + Define this as your assigned Vendor ID from the USB + Implementors Forum. This *must* be a genuine Vendor ID + to avoid polluting the USB namespace. + - CONFIG_USBD_VENDORID 0xFFFF + + CONFIG_USBD_PRODUCTID + Define this as the unique Product ID + for your device + - CONFIG_USBD_PRODUCTID 0xFFFF - MMC Support: @@ -907,8 +863,8 @@ The following options need to be configured: enable this define CONFIG_MMC. The MMC can be accessed from the boot prompt by mapping the device to physical memory similar to flash. Command line is - enabled with CFG_CMD_MMC. The MMC driver also works with - the FAT fs. This is enabled with CFG_CMD_FAT. + enabled with CONFIG_CMD_MMC. The MMC driver also works with + the FAT fs. This is enabled with CONFIG_CMD_FAT. - Journaling Flash filesystem support: CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, @@ -1112,6 +1068,16 @@ The following options need to be configured: Defines a default value for theIP address of a TFTP server to contact when using the "tftboot" command. +- Multicast TFTP Mode: + CONFIG_MCAST_TFTP + + Defines whether you want to support multicast TFTP as per + rfc-2090; for example to work with atftp. Lets lots of targets + tftp down the same boot image concurrently. Note: the ethernet + driver in use must provide a function: mcast() to join/leave a + multicast group. + + CONFIG_BOOTP_RANDOM_DELAY - BOOTP Recovery Mode: CONFIG_BOOTP_RANDOM_DELAY @@ -1123,7 +1089,7 @@ The following options need to be configured: boot, thus flooding the BOOTP server. Defining CONFIG_BOOTP_RANDOM_DELAY causes a random delay to be inserted before sending out BOOTP requests. The - following delays are insterted then: + following delays are inserted then: 1st BOOTP request: delay 0 ... 1 sec 2nd BOOTP request: delay 0 ... 2 sec @@ -1132,10 +1098,24 @@ The following options need to be configured: BOOTP requests: delay 0 ... 8 sec - DHCP Advanced Options: - CONFIG_BOOTP_MASK - - You can fine tune the DHCP functionality by adding - these flags to the CONFIG_BOOTP_MASK define: + You can fine tune the DHCP functionality by defining + CONFIG_BOOTP_* symbols: + + CONFIG_BOOTP_SUBNETMASK + CONFIG_BOOTP_GATEWAY + CONFIG_BOOTP_HOSTNAME + CONFIG_BOOTP_NISDOMAIN + CONFIG_BOOTP_BOOTPATH + CONFIG_BOOTP_BOOTFILESIZE + CONFIG_BOOTP_DNS + CONFIG_BOOTP_DNS2 + CONFIG_BOOTP_SEND_HOSTNAME + CONFIG_BOOTP_NTPSERVER + CONFIG_BOOTP_TIMEOFFSET + CONFIG_BOOTP_VENDOREX + + CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip + environment variable, not the BOOTP server. CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS serverip from a DHCP server, it is possible that more @@ -1144,15 +1124,14 @@ The following options need to be configured: serverip will be stored in the additional environment variable "dnsip2". The first DNS serverip is always stored in the variable "dnsip", when CONFIG_BOOTP_DNS - is added to the CONFIG_BOOTP_MASK. + is defined. CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable to do a dynamic update of a DNS server. To do this, they need the hostname of the DHCP requester. - If CONFIG_BOOP_SEND_HOSTNAME is added to the - CONFIG_BOOTP_MASK, the content of the "hostname" - environment variable is passed as option 12 to - the DHCP server. + If CONFIG_BOOTP_SEND_HOSTNAME is defined, the content + of the "hostname" environment variable is passed as + option 12 to the DHCP server. - CDP Options: CONFIG_CDP_DEVICE_ID @@ -1220,7 +1199,7 @@ The following options need to be configured: include the appropriate I2C driver for the selected cpu. This will allow you to use i2c commands at the u-boot - command line (as long as you set CFG_CMD_I2C in + command line (as long as you set CONFIG_CMD_I2C in CONFIG_COMMANDS) and communicate with i2c based realtime clock chips. See common/cmd_i2c.c for a description of the command line interface. @@ -2369,7 +2348,7 @@ Low Level (hardware related) configuration options: - CONFIG_LOOPW Add the "loopw" memory command. This only takes effect if - the memory commands are activated globally (CFG_CMD_MEM). + the memory commands are activated globally (CONFIG_CMD_MEM). - CONFIG_MX_CYCLIC Add the "mdc" and "mwc" memory commands. These are cyclic @@ -2383,7 +2362,7 @@ Low Level (hardware related) configuration options: This command will write 12345678 to address 100 all 10 ms. This only takes effect if the memory commands are activated - globally (CFG_CMD_MEM). + globally (CONFIG_CMD_MEM). - CONFIG_SKIP_LOWLEVEL_INIT - CONFIG_SKIP_RELOCATE_UBOOT @@ -2423,34 +2402,7 @@ is done by typing: make NAME_config where "NAME_config" is the name of one of the existing -configurations; the following names are supported: - - ADCIOP_config FPS860L_config omap730p2_config - ADS860_config GEN860T_config pcu_e_config - Alaska8220_config - AR405_config GENIETV_config PIP405_config - at91rm9200dk_config GTH_config QS823_config - CANBT_config hermes_config QS850_config - cmi_mpc5xx_config hymod_config QS860T_config - cogent_common_config IP860_config RPXlite_config - cogent_mpc8260_config IVML24_config RPXlite_DW_config - cogent_mpc8xx_config IVMS8_config RPXsuper_config - CPCI405_config JSE_config rsdproto_config - CPCIISER4_config LANTEC_config Sandpoint8240_config - csb272_config lwmon_config sbc8260_config - CU824_config MBX860T_config sbc8560_33_config - DUET_ADS_config MBX_config sbc8560_66_config - EBONY_config mpc7448hpc2_config SM850_config - ELPT860_config MPC8260ADS_config SPD823TS_config - ESTEEM192E_config MPC8540ADS_config stxgp3_config - ETX094_config MPC8540EVAL_config SXNI855T_config - FADS823_config NMPC8560ADS_config TQM823L_config - FADS850SAR_config NETVIA_config TQM850L_config - FADS860T_config omap1510inn_config TQM855L_config - FPS850L_config omap1610h2_config TQM860L_config - omap1610inn_config walnut_config - omap5912osk_config Yukon8220_config - omap2420h4_config ZPC1900_config +configurations; see the main Makefile for supported names. Note: for some board special configuration names may exist; check if additional information is available from the board vendor; for |