summaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
Diffstat (limited to 'README')
-rw-r--r--README6
1 files changed, 3 insertions, 3 deletions
diff --git a/README b/README
index b20ede4..9283c5e 100644
--- a/README
+++ b/README
@@ -295,7 +295,7 @@ The following options need to be configured:
CONFIG_FADS823 CONFIG_NETTA CONFIG_V37
CONFIG_FADS850SAR CONFIG_NETVIA CONFIG_W7OLMC
CONFIG_FADS860T CONFIG_NX823 CONFIG_W7OLMG
- CONFIG_FLAGADM CONFIG_OCRTC CONFIG_WALNUT405
+ CONFIG_FLAGADM CONFIG_OCRTC CONFIG_WALNUT
CONFIG_FPS850L CONFIG_ORSG CONFIG_ZPC1900
CONFIG_FPS860L CONFIG_OXC CONFIG_ZUMA
@@ -2192,7 +2192,7 @@ configurations; the following names are supported:
FADS850SAR_config omap1510inn_config TQM850L_config
FADS860T_config omap1610h2_config TQM855L_config
FPS850L_config omap1610inn_config TQM860L_config
- omap5912osk_config WALNUT405_config
+ omap5912osk_config walnut_config
omap2420h4_config Yukon8220_config
ZPC1900_config
@@ -3135,7 +3135,7 @@ locked as (mis-) used as memory, etc.
CFG_INIT_RAM_ADDR should be somewhere that won't interfere
with your processor/board/system design. The default value
you will find in any recent u-boot distribution in
- Walnut405.h should work for you. I'd set it to a value larger
+ walnut.h should work for you. I'd set it to a value larger
than your SDRAM module. If you have a 64MB SDRAM module, set
it above 400_0000. Just make sure your board has no resources
that are supposed to respond to that address! That code in