summaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
Diffstat (limited to 'README')
-rw-r--r--README72
1 files changed, 36 insertions, 36 deletions
diff --git a/README b/README
index 0868531..e0a4d53 100644
--- a/README
+++ b/README
@@ -620,18 +620,18 @@ The following options need to be configured:
the SMC.
- Pre-Console Buffer:
- Prior to the console being initialised (i.e. serial UART
- initialised etc) all console output is silently discarded.
- Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to
- buffer any console messages prior to the console being
- initialised to a buffer of size CONFIG_PRE_CON_BUF_SZ
- bytes located at CONFIG_PRE_CON_BUF_ADDR. The buffer is
- a circular buffer, so if more than CONFIG_PRE_CON_BUF_SZ
- bytes are output before the console is initialised, the
- earlier bytes are discarded.
-
- 'Sane' compilers will generate smaller code if
- CONFIG_PRE_CON_BUF_SZ is a power of 2
+ Prior to the console being initialised (i.e. serial UART
+ initialised etc) all console output is silently discarded.
+ Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to
+ buffer any console messages prior to the console being
+ initialised to a buffer of size CONFIG_PRE_CON_BUF_SZ
+ bytes located at CONFIG_PRE_CON_BUF_ADDR. The buffer is
+ a circular buffer, so if more than CONFIG_PRE_CON_BUF_SZ
+ bytes are output before the console is initialised, the
+ earlier bytes are discarded.
+
+ 'Sane' compilers will generate smaller code if
+ CONFIG_PRE_CON_BUF_SZ is a power of 2
- Boot Delay: CONFIG_BOOTDELAY - in seconds
Delay before automatically booting the default image;
@@ -2108,28 +2108,6 @@ The following options need to be configured:
example, some LED's) on your board. At the moment,
the following checkpoints are implemented:
-- Standalone program support:
- CONFIG_STANDALONE_LOAD_ADDR
-
- This option allows to define board specific values
- for the address where standalone program gets loaded,
- thus overwriting the architecutre dependent default
- settings.
-
-- Frame Buffer Address:
- CONFIG_FB_ADDR
-
- Define CONFIG_FB_ADDR if you want to use specific address for
- frame buffer.
- Then system will reserve the frame buffer address to defined address
- instead of lcd_setmem (this function grab the memory for frame buffer
- by panel's size).
-
- Please see board_init_f function.
-
- If you want this config option then,
- please define it at your board config file
-
Legacy uImage format:
Arg Where When
@@ -2283,6 +2261,28 @@ FIT uImage format:
-150 common/cmd_nand.c Incorrect FIT image format
151 common/cmd_nand.c FIT image format OK
+- Standalone program support:
+ CONFIG_STANDALONE_LOAD_ADDR
+
+ This option allows to define board specific values
+ for the address where standalone program gets loaded,
+ thus overwriting the architecutre dependent default
+ settings.
+
+- Frame Buffer Address:
+ CONFIG_FB_ADDR
+
+ Define CONFIG_FB_ADDR if you want to use specific
+ address for frame buffer.
+ Then system will reserve the frame buffer address to
+ defined address instead of lcd_setmem (this function
+ grab the memory for frame buffer by panel's size).
+
+ Please see board_init_f function.
+
+ If you want this config option then,
+ please define it at your board config file
+
- Automatic software updates via TFTP server
CONFIG_UPDATE_TFTP
CONFIG_UPDATE_TFTP_CNT_MAX
@@ -2899,8 +2899,8 @@ Low Level (hardware related) configuration options:
* 1ull) << 32 | CONFIG_SYS_CCSRBAR_PHYS_LOW)
- CONFIG_SYS_CCSRBAR_PHYS_HIGH:
- Bits 33-36 of CONFIG_SYS_CCSRBAR_PHYS. This value is typically
- either 0 (32-bit build) or 0xF (36-bit build). This macro is
+ Bits 33-36 of CONFIG_SYS_CCSRBAR_PHYS. This value is typically
+ either 0 (32-bit build) or 0xF (36-bit build). This macro is
used in assembly code, so it must not contain typecasts or
integer size suffixes (e.g. "ULL").