summaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
Diffstat (limited to 'README')
-rw-r--r--README44
1 files changed, 22 insertions, 22 deletions
diff --git a/README b/README
index 49f9d88..5135281 100644
--- a/README
+++ b/README
@@ -2120,22 +2120,22 @@ following configurations:
environment in one of the last sectors, leaving a gap
between U-Boot and the environment.
- - CFG_ENV_OFFSET:
+ - CONFIG_ENV_OFFSET:
Offset of environment data (variable area) to the
beginning of flash memory; for instance, with bottom boot
type flash chips the second sector can be used: the offset
for this sector is given here.
- CFG_ENV_OFFSET is used relative to CFG_FLASH_BASE.
+ CONFIG_ENV_OFFSET is used relative to CFG_FLASH_BASE.
- - CFG_ENV_ADDR:
+ - CONFIG_ENV_ADDR:
This is just another way to specify the start address of
the flash sector containing the environment (instead of
- CFG_ENV_OFFSET).
+ CONFIG_ENV_OFFSET).
- - CFG_ENV_SECT_SIZE:
+ - CONFIG_ENV_SECT_SIZE:
Size of the sector containing the environment.
@@ -2144,10 +2144,10 @@ following configurations:
In such a case you don't want to spend a whole sector for
the environment.
- - CFG_ENV_SIZE:
+ - CONFIG_ENV_SIZE:
If you use this in combination with CONFIG_ENV_IS_IN_FLASH
- and CFG_ENV_SECT_SIZE, you can specify to use only a part
+ and CONFIG_ENV_SECT_SIZE, you can specify to use only a part
of this flash sector for the environment. This saves
memory for the RAM copy of the environment.
@@ -2161,8 +2161,8 @@ following configurations:
wrong before the contents has been restored from a copy in
RAM, your target system will be dead.
- - CFG_ENV_ADDR_REDUND
- CFG_ENV_SIZE_REDUND
+ - CONFIG_ENV_ADDR_REDUND
+ CONFIG_ENV_SIZE_REDUND
These settings describe a second storage area used to hold
a redundant copy of the environment data, so that there is
@@ -2180,8 +2180,8 @@ accordingly!
(NVRAM, battery buffered SRAM) which you want to use for the
environment.
- - CFG_ENV_ADDR:
- - CFG_ENV_SIZE:
+ - CONFIG_ENV_ADDR:
+ - CONFIG_ENV_SIZE:
These two #defines are used to determine the memory area you
want to use for environment. It is assumed that this memory
@@ -2204,8 +2204,8 @@ to save the current settings.
Use this if you have an EEPROM or similar serial access
device and a driver for it.
- - CFG_ENV_OFFSET:
- - CFG_ENV_SIZE:
+ - CONFIG_ENV_OFFSET:
+ - CONFIG_ENV_SIZE:
These two #defines specify the offset and size of the
environment area within the total memory of your EEPROM.
@@ -2247,9 +2247,9 @@ to save the current settings.
Define this if you have a DataFlash memory device which you
want to use for the environment.
- - CFG_ENV_OFFSET:
- - CFG_ENV_ADDR:
- - CFG_ENV_SIZE:
+ - CONFIG_ENV_OFFSET:
+ - CONFIG_ENV_ADDR:
+ - CONFIG_ENV_SIZE:
These three #defines specify the offset and size of the
environment area within the total memory of your DataFlash placed
@@ -2260,21 +2260,21 @@ to save the current settings.
Define this if you have a NAND device which you want to use
for the environment.
- - CFG_ENV_OFFSET:
- - CFG_ENV_SIZE:
+ - CONFIG_ENV_OFFSET:
+ - CONFIG_ENV_SIZE:
These two #defines specify the offset and size of the environment
area within the first NAND device.
- - CFG_ENV_OFFSET_REDUND
+ - CONFIG_ENV_OFFSET_REDUND
- This setting describes a second storage area of CFG_ENV_SIZE
+ This setting describes a second storage area of CONFIG_ENV_SIZE
size used to hold a redundant copy of the environment data,
so that there is a valid backup copy in case there is a
power failure during a "saveenv" operation.
- Note: CFG_ENV_OFFSET and CFG_ENV_OFFSET_REDUND must be aligned
- to a block boundary, and CFG_ENV_SIZE must be a multiple of
+ Note: CONFIG_ENV_OFFSET and CONFIG_ENV_OFFSET_REDUND must be aligned
+ to a block boundary, and CONFIG_ENV_SIZE must be a multiple of
the NAND devices block size.
- CFG_SPI_INIT_OFFSET