diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 216 |
1 files changed, 108 insertions, 108 deletions
@@ -141,7 +141,7 @@ Directory Hierarchy: - cpu/74xx_7xx Files specific to Motorola MPC74xx and 7xx CPUs - cpu/arm925t Files specific to ARM 925 CPUs -- cpu/arm926ejs Files specific to ARM 926 CPUs +- cpu/arm926ejs Files specific to ARM 926 CPUs - cpu/mpc5xx Files specific to Motorola MPC5xx CPUs - cpu/mpc8xx Files specific to Motorola MPC8xx CPUs - cpu/mpc824x Files specific to Motorola MPC824x CPUs @@ -150,22 +150,22 @@ Directory Hierarchy: - cpu/ppc4xx Files specific to IBM 4xx CPUs -- board/LEOX/ Files specific to boards manufactured by The LEOX team +- board/LEOX/ Files specific to boards manufactured by The LEOX team - board/LEOX/elpt860 Files specific to ELPT860 boards - board/RPXClassic Files specific to RPXClassic boards -- board/RPXlite Files specific to RPXlite boards +- board/RPXlite Files specific to RPXlite boards - board/at91rm9200dk Files specific to AT91RM9200DK boards - board/c2mon Files specific to c2mon boards -- board/cmi Files specific to cmi boards +- board/cmi Files specific to cmi boards - board/cogent Files specific to Cogent boards (need further configuration) Files specific to CPCIISER4 boards -- board/cpu86 Files specific to CPU86 boards +- board/cpu86 Files specific to CPU86 boards - board/cray/ Files specific to boards manufactured by Cray -- board/cray/L1 Files specific to L1 boards +- board/cray/L1 Files specific to L1 boards - board/cu824 Files specific to CU824 boards -- board/ebony Files specific to IBM Ebony board +- board/ebony Files specific to IBM Ebony board - board/eric Files specific to ERIC boards - board/esd/ Files specific to boards manufactured by ESD - board/esd/adciop Files specific to ADCIOP boards @@ -175,8 +175,8 @@ Directory Hierarchy: - board/esd/cpciiser4 Files specific to CPCIISER4 boards - board/esd/common Common files for ESD boards - board/esd/dasa_sim Files specific to DASA_SIM boards -- board/esd/du405 Files specific to DU405 boards -- board/esd/ocrtc Files specific to OCRTC boards +- board/esd/du405 Files specific to DU405 boards +- board/esd/ocrtc Files specific to OCRTC boards - board/esd/pci405 Files specific to PCI405 boards - board/esteem192e Files specific to ESTEEM192E boards @@ -211,17 +211,17 @@ Directory Hierarchy: - board/mpl/common Common files for MPL boards - board/mpl/pip405 Files specific to PIP405 boards - board/mpl/mip405 Files specific to MIP405 boards -- board/mpl/vcma9 Files specific to VCMA9 boards -- board/musenki Files specific to MUSEKNI boards -- board/mvs1 Files specific to MVS1 boards -- board/nx823 Files specific to NX823 boards -- board/oxc Files specific to OXC boards +- board/mpl/vcma9 Files specific to VCMA9 boards +- board/musenki Files specific to MUSEKNI boards +- board/mvs1 Files specific to MVS1 boards +- board/nx823 Files specific to NX823 boards +- board/oxc Files specific to OXC boards - board/omap1510inn Files specific to OMAP 1510 Innovator boards - board/omap1610inn Files specific to OMAP 1610 Innovator boards -- board/pcippc2 Files specific to PCIPPC2/PCIPPC6 boards -- board/pm826 Files specific to PM826 boards +- board/pcippc2 Files specific to PCIPPC2/PCIPPC6 boards +- board/pm826 Files specific to PM826 boards - board/ppmc8260 Files specific to PPMC8260 boards - board/snmc/qs850 Files specific to QS850/823 boards @@ -232,24 +232,24 @@ Directory Hierarchy: Files specific to RSDproto boards - board/sandpoint Files specific to Sandpoint boards -- board/sbc8260 Files specific to SBC8260 boards +- board/sbc8260 Files specific to SBC8260 boards - board/sacsng Files specific to SACSng boards - board/siemens Files specific to boards manufactured by Siemens AG - board/siemens/CCM Files specific to CCM boards - board/siemens/IAD210 Files specific to IAD210 boards -- board/siemens/SCM Files specific to SCM boards +- board/siemens/SCM Files specific to SCM boards - board/siemens/pcu_e Files specific to PCU_E boards - board/sixnet Files specific to SIXNET boards - board/spd8xx Files specific to SPD8xxTS boards - board/tqm8260 Files specific to TQM8260 boards - board/tqm8xx Files specific to TQM8xxL boards -- board/w7o Files specific to W7O boards +- board/w7o Files specific to W7O boards - board/walnut405 Files specific to Walnut405 boards -- board/westel/ Files specific to boards manufactured by Westel Wireless +- board/westel/ Files specific to boards manufactured by Westel Wireless - board/westel/amx860 Files specific to AMX860 boards -- board/utx8245 Files specific to UTX8245 boards -- board/zpc1900 Files specific to Zephyr Engineering ZPC.1900 board +- board/utx8245 Files specific to UTX8245 boards +- board/zpc1900 Files specific to Zephyr Engineering ZPC.1900 board Software Configuration: ======================= @@ -336,49 +336,49 @@ The following options need to be configured: PowerPC based boards: --------------------- - CONFIG_ADCIOP, CONFIG_ICU862 CONFIG_RPXsuper, - CONFIG_ADS860, CONFIG_IP860, CONFIG_SM850, - CONFIG_AMX860, CONFIG_IPHASE4539, CONFIG_SPD823TS, - CONFIG_AR405, CONFIG_IVML24, CONFIG_SXNI855T, - CONFIG_BAB7xx, CONFIG_IVML24_128, CONFIG_Sandpoint8240, - CONFIG_CANBT, CONFIG_IVML24_256, CONFIG_Sandpoint8245, - CONFIG_CCM, CONFIG_IVMS8, CONFIG_TQM823L, - CONFIG_CPCI405, CONFIG_IVMS8_128, CONFIG_TQM850L, + CONFIG_ADCIOP, CONFIG_ICU862 CONFIG_RPXsuper, + CONFIG_ADS860, CONFIG_IP860, CONFIG_SM850, + CONFIG_AMX860, CONFIG_IPHASE4539, CONFIG_SPD823TS, + CONFIG_AR405, CONFIG_IVML24, CONFIG_SXNI855T, + CONFIG_BAB7xx, CONFIG_IVML24_128, CONFIG_Sandpoint8240, + CONFIG_CANBT, CONFIG_IVML24_256, CONFIG_Sandpoint8245, + CONFIG_CCM, CONFIG_IVMS8, CONFIG_TQM823L, + CONFIG_CPCI405, CONFIG_IVMS8_128, CONFIG_TQM850L, CONFIG_CPCI4052, CONFIG_IVMS8_256, CONFIG_TQM855L, CONFIG_CPCIISER4, CONFIG_LANTEC, CONFIG_TQM860L, - CONFIG_CPU86, CONFIG_MBX, CONFIG_TQM8260, - CONFIG_CRAYL1, CONFIG_MBX860T, CONFIG_TTTech, - CONFIG_CU824, CONFIG_MHPC, CONFIG_UTX8245, + CONFIG_CPU86, CONFIG_MBX, CONFIG_TQM8260, + CONFIG_CRAYL1, CONFIG_MBX860T, CONFIG_TTTech, + CONFIG_CU824, CONFIG_MHPC, CONFIG_UTX8245, CONFIG_DASA_SIM, CONFIG_MIP405, CONFIG_W7OLMC, - CONFIG_DU405, CONFIG_MOUSSE, CONFIG_W7OLMG, - CONFIG_ELPPC, CONFIG_MPC8260ADS, CONFIG_WALNUT405, - CONFIG_ERIC, CONFIG_MUSENKI, CONFIG_ZUMA, - CONFIG_ESTEEM192E, CONFIG_MVS1, CONFIG_c2mon, - CONFIG_ETX094, CONFIG_NX823, CONFIG_cogent_mpc8260, + CONFIG_DU405, CONFIG_MOUSSE, CONFIG_W7OLMG, + CONFIG_ELPPC, CONFIG_MPC8260ADS, CONFIG_WALNUT405, + CONFIG_ERIC, CONFIG_MUSENKI, CONFIG_ZUMA, + CONFIG_ESTEEM192E, CONFIG_MVS1, CONFIG_c2mon, + CONFIG_ETX094, CONFIG_NX823, CONFIG_cogent_mpc8260, CONFIG_EVB64260, CONFIG_OCRTC, CONFIG_cogent_mpc8xx, - CONFIG_FADS823, CONFIG_ORSG, CONFIG_ep8260, - CONFIG_FADS850SAR, CONFIG_OXC, CONFIG_gw8260, + CONFIG_FADS823, CONFIG_ORSG, CONFIG_ep8260, + CONFIG_FADS850SAR, CONFIG_OXC, CONFIG_gw8260, CONFIG_FADS860T, CONFIG_PCI405, CONFIG_hermes, - CONFIG_FLAGADM, CONFIG_PCIPPC2, CONFIG_hymod, - CONFIG_FPS850L, CONFIG_PCIPPC6, CONFIG_lwmon, - CONFIG_GEN860T, CONFIG_PIP405, CONFIG_pcu_e, - CONFIG_GENIETV, CONFIG_PM826, CONFIG_ppmc8260, - CONFIG_GTH, CONFIG_RPXClassic, CONFIG_rsdproto, - CONFIG_IAD210, CONFIG_RPXlite, CONFIG_sbc8260, - CONFIG_EBONY, CONFIG_sacsng, CONFIG_FPS860L, - CONFIG_V37, CONFIG_ELPT860, CONFIG_CMI, - CONFIG_NETVIA, CONFIG_RBC823, CONFIG_ZPC1900, + CONFIG_FLAGADM, CONFIG_PCIPPC2, CONFIG_hymod, + CONFIG_FPS850L, CONFIG_PCIPPC6, CONFIG_lwmon, + CONFIG_GEN860T, CONFIG_PIP405, CONFIG_pcu_e, + CONFIG_GENIETV, CONFIG_PM826, CONFIG_ppmc8260, + CONFIG_GTH, CONFIG_RPXClassic, CONFIG_rsdproto, + CONFIG_IAD210, CONFIG_RPXlite, CONFIG_sbc8260, + CONFIG_EBONY, CONFIG_sacsng, CONFIG_FPS860L, + CONFIG_V37, CONFIG_ELPT860, CONFIG_CMI, + CONFIG_NETVIA, CONFIG_RBC823, CONFIG_ZPC1900, CONFIG_MPC8540ADS, CONFIG_MPC8560ADS, CONFIG_QS850, - CONFIG_QS823, CONFIG_QS860T, CONFIG_DB64360, + CONFIG_QS823, CONFIG_QS860T, CONFIG_DB64360, CONFIG_DB64460, CONFIG_DUET_ADS ARM based boards: ----------------- CONFIG_HHP_CRADLE, CONFIG_DNP1110, CONFIG_EP7312, - CONFIG_IMPA7, CONFIG_LART, CONFIG_LUBBOCK, + CONFIG_IMPA7, CONFIG_LART, CONFIG_LUBBOCK, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610 - CONFIG_SHANNON, CONFIG_SMDK2400, CONFIG_SMDK2410, + CONFIG_SHANNON, CONFIG_SMDK2400, CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9, CONFIG_AT91RM9200DK @@ -430,12 +430,12 @@ The following options need to be configured: CFG_MEASURE_CPUCLK - Define this to measure the actual CPU clock instead - of relying on the correctness of the configured - values. Mostly useful for board bringup to make sure - the PLL is locked at the intended frequency. Note - that this requires a (stable) reference clock (32 kHz - RTC clock), + Define this to measure the actual CPU clock instead + of relying on the correctness of the configured + values. Mostly useful for board bringup to make sure + the PLL is locked at the intended frequency. Note + that this requires a (stable) reference clock (32 kHz + RTC clock), - Linux Kernel Interface: CONFIG_CLOCKS_IN_MHZ @@ -479,11 +479,11 @@ The following options need to be configured: bit-blit (cf. smiLynxEM) VIDEO_VISIBLE_COLS visible pixel columns (cols=pitch) - VIDEO_VISIBLE_ROWS visible pixel rows - VIDEO_PIXEL_SIZE bytes per pixel + VIDEO_VISIBLE_ROWS visible pixel rows + VIDEO_PIXEL_SIZE bytes per pixel VIDEO_DATA_FORMAT graphic data format (0-5, cf. cfb_console.c) - VIDEO_FB_ADRS framebuffer address + VIDEO_FB_ADRS framebuffer address VIDEO_KBD_INIT_FCT keyboard int fct (i.e. i8042_kbd_init()) VIDEO_TSTC_FCT test char fct @@ -619,15 +619,15 @@ The following options need to be configured: CFG_CMD_AUTOSCRIPT Autoscript Support CFG_CMD_BDI bdinfo CFG_CMD_BEDBUG Include BedBug Debugger - CFG_CMD_BMP * BMP support + CFG_CMD_BMP * BMP support CFG_CMD_BOOTD bootd CFG_CMD_CACHE icache, dcache CFG_CMD_CONSOLE coninfo CFG_CMD_DATE * support for RTC, date/time... CFG_CMD_DHCP DHCP support - CFG_CMD_DIAG * Diagnostics - CFG_CMD_DOC * Disk-On-Chip Support - CFG_CMD_DTT Digital Therm and Thermostat + CFG_CMD_DIAG * Diagnostics + CFG_CMD_DOC * Disk-On-Chip Support + CFG_CMD_DTT Digital Therm and Thermostat CFG_CMD_ECHO * echo arguments CFG_CMD_EEPROM * EEPROM read/write support CFG_CMD_ELF bootelf, bootvx @@ -637,37 +637,37 @@ The following options need to be configured: CFG_CMD_FDOS * Dos diskette Support CFG_CMD_FLASH flinfo, erase, protect CFG_CMD_FPGA FPGA device initialization support - CFG_CMD_HWFLOW * RTS/CTS hw flow control + CFG_CMD_HWFLOW * RTS/CTS hw flow control CFG_CMD_I2C * I2C serial bus support CFG_CMD_IDE * IDE harddisk support CFG_CMD_IMI iminfo - CFG_CMD_IMLS List all found images + CFG_CMD_IMLS List all found images CFG_CMD_IMMAP * IMMR dump support CFG_CMD_IRQ * irqinfo - CFG_CMD_JFFS2 * JFFS2 Support + CFG_CMD_JFFS2 * JFFS2 Support CFG_CMD_KGDB * kgdb CFG_CMD_LOADB loadb CFG_CMD_LOADS loads CFG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, loop, mtest - CFG_CMD_MISC Misc functions like sleep etc + CFG_CMD_MISC Misc functions like sleep etc CFG_CMD_MMC MMC memory mapped support CFG_CMD_MII MII utility commands - CFG_CMD_NAND * NAND support + CFG_CMD_NAND * NAND support CFG_CMD_NET bootp, tftpboot, rarpboot CFG_CMD_PCI * pciinfo CFG_CMD_PCMCIA * PCMCIA support - CFG_CMD_PING * send ICMP ECHO_REQUEST to network host - CFG_CMD_PORTIO * Port I/O + CFG_CMD_PING * send ICMP ECHO_REQUEST to network host + CFG_CMD_PORTIO * Port I/O CFG_CMD_REGINFO * Register dump CFG_CMD_RUN run command in env variable - CFG_CMD_SAVES save S record dump + CFG_CMD_SAVES save S record dump CFG_CMD_SCSI * SCSI Support - CFG_CMD_SDRAM * print SDRAM configuration information + CFG_CMD_SDRAM * print SDRAM configuration information CFG_CMD_SETGETDCR Support for DCR Register access (4xx only) CFG_CMD_SPI * SPI serial bus support CFG_CMD_USB * USB support - CFG_CMD_VFD * VFD support (TRAB) + CFG_CMD_VFD * VFD support (TRAB) CFG_CMD_BSP * Board SPecific functions ----------------------------------------------- CFG_CMD_ALL all @@ -850,9 +850,9 @@ The following options need to be configured: Following modes are supported (* is default): 800x600 1024x768 1280x1024 - 256 (8bit) 303* 305 307 - 65536 (16bit) 314 317 31a - 16,7 Mill (24bit) 315 318 31b + 256 (8bit) 303* 305 307 + 65536 (16bit) 314 317 31a + 16,7 Mill (24bit) 315 318 31b (i.e. setenv videomode 317; saveenv; reset;) CONFIG_VIDEO_SED13806 @@ -1031,7 +1031,7 @@ The following options need to be configured: clock chips. See common/cmd_i2c.c for a description of the command line interface. - CONFIG_HARD_I2C selects the CPM hardware driver for I2C. + CONFIG_HARD_I2C selects the CPM hardware driver for I2C. CONFIG_SOFT_I2C configures u-boot to use a software (aka bit-banging) driver instead of CPM or similar hardware @@ -1061,7 +1061,7 @@ The following options need to be configured: (Optional). Any commands necessary to enable the I2C controller or configure ports. - eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) + eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) I2C_PORT @@ -1099,7 +1099,7 @@ The following options need to be configured: eg: #define I2C_SDA(bit) \ if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ - else immr->im_cpm.cp_pbdat &= ~PB_SDA + else immr->im_cpm.cp_pbdat &= ~PB_SDA I2C_SCL(bit) @@ -1108,7 +1108,7 @@ The following options need to be configured: eg: #define I2C_SCL(bit) \ if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ - else immr->im_cpm.cp_pbdat &= ~PB_SCL + else immr->im_cpm.cp_pbdat &= ~PB_SCL I2C_DELAY @@ -1205,7 +1205,7 @@ The following options need to be configured: Time to wait after FPGA configuration. The default is 200 mS. -- FPGA Support: CONFIG_FPGA_COUNT +- FPGA Support: CONFIG_FPGA_COUNT Specify the number of FPGA devices to support. @@ -1422,11 +1422,11 @@ The following options need to be configured: Arg Where When 1 common/cmd_bootm.c before attempting to boot an image - -1 common/cmd_bootm.c Image header has bad magic number + -1 common/cmd_bootm.c Image header has bad magic number 2 common/cmd_bootm.c Image header has correct magic number - -2 common/cmd_bootm.c Image header has bad checksum + -2 common/cmd_bootm.c Image header has bad checksum 3 common/cmd_bootm.c Image header has correct checksum - -3 common/cmd_bootm.c Image data has bad checksum + -3 common/cmd_bootm.c Image data has bad checksum 4 common/cmd_bootm.c Image data has correct checksum -4 common/cmd_bootm.c Image is for unsupported architecture 5 common/cmd_bootm.c Architecture check OK @@ -1439,10 +1439,10 @@ The following options need to be configured: 8 common/cmd_bootm.c Image Type check OK -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) 9 common/cmd_bootm.c Start initial ramdisk verification - -10 common/cmd_bootm.c Ramdisk header has bad magic number - -11 common/cmd_bootm.c Ramdisk header has bad checksum + -10 common/cmd_bootm.c Ramdisk header has bad magic number + -11 common/cmd_bootm.c Ramdisk header has bad checksum 10 common/cmd_bootm.c Ramdisk header is OK - -12 common/cmd_bootm.c Ramdisk data has bad checksum + -12 common/cmd_bootm.c Ramdisk data has bad checksum 11 common/cmd_bootm.c Ramdisk data has correct checksum 12 common/cmd_bootm.c Ramdisk verification complete, start loading -13 common/cmd_bootm.c Wrong Image Type (not PPC Linux Ramdisk) @@ -1470,7 +1470,7 @@ The following options need to be configured: -1 common/cmd_nand.c Read Error on boot device -1 common/cmd_nand.c Image header has bad magic number - -1 common/env_common.c Environment has a bad CRC, using default + -1 common/env_common.c Environment has a bad CRC, using default Modem Support: @@ -1774,7 +1774,7 @@ to save the current settings. - CFG_EEPROM_PAGE_WRITE_DELAY_MS: If defined, the number of milliseconds to delay between - page writes. The default is zero milliseconds. + page writes. The default is zero milliseconds. - CFG_I2C_EEPROM_ADDR_LEN: The length in bytes of the EEPROM memory array address. Note @@ -1992,7 +1992,7 @@ change it to: CROSS_COMPILE = ppc_4xx- -U-Boot is intended to be simple to build. After installing the +U-Boot is intended to be simple to build. After installing the sources you must configure U-Boot for one specific board type. This is done by typing: @@ -2020,7 +2020,7 @@ configurations; the following names are supported: at91rm9200dk_config omap1510inn_config MPC8260ADS_config omap1610inn_config ZPC1900_config MPC8540ADS_config MPC8560ADS_config QS850_config QS823_config - QS860T_config DUET_ADS_config + QS860T_config DUET_ADS_config Note: for some board special configuration names may exist; check if additional information is available from the board vendor; for @@ -2136,15 +2136,15 @@ mw - memory write (fill) cp - memory copy cmp - memory compare crc32 - checksum calculation -imd - i2c memory display -imm - i2c memory modify (auto-incrementing) -inm - i2c memory modify (constant address) -imw - i2c memory write (fill) -icrc32 - i2c checksum calculation -iprobe - probe to discover valid I2C chip addresses -iloop - infinite loop on address range -isdram - print SDRAM configuration information -sspi - SPI utility commands +imd - i2c memory display +imm - i2c memory modify (auto-incrementing) +inm - i2c memory modify (constant address) +imw - i2c memory write (fill) +icrc32 - i2c checksum calculation +iprobe - probe to discover valid I2C chip addresses +iloop - infinite loop on address range +isdram - print SDRAM configuration information +sspi - SPI utility commands base - print or set address offset printenv- print environment variables setenv - set environment variables @@ -2473,7 +2473,7 @@ Example: make uImage The "uImage" build target uses a special tool (in 'tools/mkimage') to -encapsulate a compressed Linux kernel image with header information, +encapsulate a compressed Linux kernel image with header information, CRC32 checksum etc. for use with U-Boot. This is what we are doing: * build a standard "vmlinux" kernel image (in ELF binary format): @@ -2860,9 +2860,9 @@ use "cu" for S-Record download ("loads" command). Nevertheless, if you absolutely want to use it try adding this configuration to your "File transfer protocols" section: - Name Program Name U/D FullScr IO-Red. Multi - X kermit /usr/bin/kermit -i -l %l -s Y U Y N N - Y kermit /usr/bin/kermit -i -l %l -r N D Y N N + Name Program Name U/D FullScr IO-Red. Multi + X kermit /usr/bin/kermit -i -l %l -s Y U Y N N + Y kermit /usr/bin/kermit -i -l %l -r N D Y N N NetBSD Notes: @@ -2918,7 +2918,7 @@ models provide on-chip memory (like the IMMR area on MPC8xx and MPC826x processors), on others (parts of) the data cache can be locked as (mis-) used as memory, etc. - Chris Hallinan posted a good summary of these issues to the + Chris Hallinan posted a good summary of these issues to the u-boot-users mailing list: Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)? @@ -2987,7 +2987,7 @@ For PowerPC, the following registers have specific use: R1: stack pointer R2: TOC pointer R3-R4: parameter passing and return values - R5-R10: parameter passing + R5-R10: parameter passing R13: small data area pointer R30: GOT pointer R31: frame pointer |